Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.14.167 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10911-c155900f66)) #0 SMP Wed Jan 29 16:05:35 2020
- [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 122880
- [ 0.000000] free_area_init_node: node 0, pgdat c0a27880, node_mem_map dda39000
- [ 0.000000] Normal zone: 960 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
- [ 0.000000] random: get_random_bytes called from 0xc09008dc with crng_init=0
- [ 0.000000] percpu: Embedded 15 pages/cpu s29388 r8192 d23860 u61440
- [ 0.000000] pcpu-alloc: s29388 r8192 d23860 u61440 alloc=15*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121920
- [ 0.000000] Kernel command line:
- [ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 477376K/491520K available (4974K kernel code, 160K rwdata, 756K rodata, 1024K init, 235K bss, 14144K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0208000 - 0xc07dbb78 (5967 kB)
- [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
- [ 0.000000] .data : 0xc0a00000 - 0xc0a28180 ( 161 kB)
- [ 0.000000] .bss : 0xc0a2a000 - 0xc0a64e18 ( 236 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
- [ 0.000006] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
- [ 0.000020] Switching to timer-based delay loop, resolution 160ns
- [ 0.000219] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
- [ 0.000242] pid_max: default: 32768 minimum: 301
- [ 0.000369] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000387] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000959] CPU: Testing write buffer coherency: ok
- [ 0.001716] Setting up static identity map for 0x42300000 - 0x42300060
- [ 0.001875] Hierarchical SRCU implementation.
- [ 0.002608] smp: Bringing up secondary CPUs ...
- [ 0.004428] smp: Brought up 1 node, 2 CPUs
- [ 0.004444] SMP: Total of 2 processors activated (25.00 BogoMIPS).
- [ 0.004455] CPU: All CPU(s) started in SVC mode.
- [ 0.015270] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
- [ 0.015446] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.015471] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.015582] pinctrl core: initialized pinctrl subsystem
- [ 0.016573] NET: Registered protocol family 16
- [ 0.016831] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.018185] cpuidle: using governor ladder
- [ 0.018251] cpuidle: using governor menu
- [ 0.040625] msm_bus_fabric_init_driver
- [ 0.042112] usbcore: registered new interface driver usbfs
- [ 0.042191] usbcore: registered new interface driver hub
- [ 0.042277] usbcore: registered new device driver usb
- [ 0.042328] pps_core: LinuxPPS API ver. 1 registered
- [ 0.042340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.042374] PTP clock support registered
- [ 0.044076] clocksource: Switched to clocksource dg_timer
- [ 0.047374] NET: Registered protocol family 2
- [ 0.047974] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.048015] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.048070] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.048161] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.048187] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.048363] NET: Registered protocol family 1
- [ 0.048409] PCI: CLS 0 bytes, default 64
- [ 0.049545] No memory allocated for crashlog
- [ 0.049832] workingset: timestamp_bits=30 max_order=17 bucket_order=0
- [ 0.055131] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.055150] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.061727] io scheduler noop registered
- [ 0.061746] io scheduler deadline registered (default)
- [ 0.063392] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
- [ 0.063496] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
- [ 0.063592] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
- [ 0.064363] OF: PCI: host bridge /soc/pci@1b500000 ranges:
- [ 0.064487] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
- [ 0.064512] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
- [ 0.172648] qcom-pcie 1b500000.pci: link up
- [ 0.172821] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
- [ 0.172845] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.172866] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
- [ 0.172883] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
- [ 0.172900] pci_bus 0000:00: scanning bus
- [ 0.172948] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
- [ 0.173035] pci 0000:00:00.0: calling 0xc030d3c0
- [ 0.173108] pci 0000:00:00.0: supports D1
- [ 0.173121] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.173136] pci 0000:00:00.0: PME# disabled
- [ 0.173405] pci_bus 0000:00: fixups for bus
- [ 0.173428] PCI: bus0: Fast back to back transfers disabled
- [ 0.173449] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
- [ 0.173575] pci_bus 0000:01: scanning bus
- [ 0.173752] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
- [ 0.174101] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 0.174673] pci 0000:01:00.0: calling 0xc030d3c0
- [ 0.175315] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 0.175356] pci 0000:01:00.0: PME# disabled
- [ 0.175697] pci_bus 0000:01: fixups for bus
- [ 0.175768] PCI: bus1: Fast back to back transfers disabled
- [ 0.175784] pci_bus 0000:01: bus scan returning with max=01
- [ 0.175803] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
- [ 0.175820] pci_bus 0000:00: bus scan returning with max=ff
- [ 0.175871] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
- [ 0.175898] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
- [ 0.176028] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 0.176051] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
- [ 0.176081] pci 0000:00:00.0: calling 0xc055f998
- [ 0.176279] pcieport 0000:00:00.0: assign IRQ: got 67
- [ 0.176593] pcieport 0000:00:00.0: AER enabled with IRQ 35
- [ 0.176707] pci 0000:01:00.0: calling 0xc055f998
- [ 0.177113] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
- [ 0.177208] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
- [ 0.177310] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
- [ 0.178069] OF: PCI: host bridge /soc/pci@1b700000 ranges:
- [ 0.178105] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
- [ 0.178126] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
- [ 0.288012] qcom-pcie 1b700000.pci: link up
- [ 0.288153] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
- [ 0.288174] pci_bus 0001:00: root bus resource [bus 00-ff]
- [ 0.288190] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
- [ 0.288204] pci_bus 0001:00: scanning bus
- [ 0.288245] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
- [ 0.288316] pci 0001:00:00.0: calling 0xc030d3c0
- [ 0.288376] pci 0001:00:00.0: supports D1
- [ 0.288386] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
- [ 0.288400] pci 0001:00:00.0: PME# disabled
- [ 0.288643] pci_bus 0001:00: fixups for bus
- [ 0.288662] PCI: bus0: Fast back to back transfers disabled
- [ 0.288680] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
- [ 0.288797] pci_bus 0001:01: scanning bus
- [ 0.288983] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
- [ 0.289353] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 0.289849] pci 0001:01:00.0: calling 0xc030d3c0
- [ 0.290538] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
- [ 0.290581] pci 0001:01:00.0: PME# disabled
- [ 0.290935] pci_bus 0001:01: fixups for bus
- [ 0.291012] PCI: bus1: Fast back to back transfers disabled
- [ 0.291027] pci_bus 0001:01: bus scan returning with max=01
- [ 0.291044] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
- [ 0.291061] pci_bus 0001:00: bus scan returning with max=ff
- [ 0.291097] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
- [ 0.291121] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
- [ 0.291255] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
- [ 0.291275] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
- [ 0.291302] pci 0001:00:00.0: calling 0xc055f998
- [ 0.291478] pcieport 0001:00:00.0: assign IRQ: got 100
- [ 0.291750] pcieport 0001:00:00.0: AER enabled with IRQ 68
- [ 0.291858] pci 0001:01:00.0: calling 0xc055f998
- [ 0.294056] L2 @ QSB rate. Forcing new rate.
- [ 0.294268] L2 @ 384000 KHz
- [ 0.294566] CPU0 @ 800000 KHz
- [ 0.294579] CPU1 @ QSB rate. Forcing new rate.
- [ 0.294704] CPU1 @ 384000 KHz
- [ 0.298553] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
- [ 0.300463] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.303032] msm_serial 16340000.serial: msm_serial: detected port #0
- [ 0.303136] msm_serial 16340000.serial: uartclk = 7372800
- [ 0.303218] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 101, base_baud = 460800) is a MSM
- [ 0.303257] msm_serial: console setup on port #0
- [ 1.023080] console [ttyMSM0] enabled
- [ 1.027857] msm_serial: driver initialized
- [ 1.036460] loop: module loaded
- [ 1.038503] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xa1
- [ 1.038537] nand: Macronix MX30UF1G18AC
- [ 1.045118] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 1.048665] 8 fixed-partitions partitions found on MTD device qcom_nand.0
- [ 1.056306] Creating 8 MTD partitions on "qcom_nand.0":
- [ 1.063069] 0x000000000000-0x000000c80000 : "qcadata"
- [ 1.073126] random: fast init done
- [ 1.090896] 0x000000c80000-0x000001180000 : "APPSBL"
- [ 1.100381] 0x000001180000-0x000001200000 : "APPSBLENV"
- [ 1.102050] 0x000001200000-0x000001340000 : "art"
- [ 1.107402] 0x000001340000-0x000001480000 : "artbak"
- [ 1.112195] 0x000001480000-0x000001880000 : "kernel"
- [ 1.122026] 0x000001880000-0x000007900000 : "ubi"
- [ 1.290097] 0x000007900000-0x000008000000 : "reserve"
- [ 1.304239] libphy: GPIO Bitbanged MDIO: probed
- [ 1.325853] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
- [ 2.186358] ar8327: qca,phy-rgmii-en is not specified
- [ 2.186738] libphy: Fixed MDIO Bus: probed
- [ 2.192544] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
- [ 2.194769] stmmac - user ID: 0x10, Synopsys ID: 0x37
- [ 2.200898] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
- [ 2.206035] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
- [ 2.212010] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
- [ 2.220080] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
- [ 2.227611] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
- [ 2.234639] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
- [ 2.242475] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
- [ 2.248352] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
- [ 2.255761] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
- [ 2.264068] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
- [ 2.271331] stmmac - user ID: 0x10, Synopsys ID: 0x37
- [ 2.277437] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
- [ 2.282405] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
- [ 2.288558] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
- [ 2.296556] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
- [ 2.304023] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
- [ 2.311114] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
- [ 2.319017] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
- [ 2.324827] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
- [ 2.332147] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
- [ 2.339659] i2c /dev entries driver
- [ 2.348411] Calibration not found.
- [ 2.351906] Speed bin: 0
- [ 2.354184] PVS bin: 4
- [ 2.358303] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
- [ 2.359119] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
- [ 2.366929] sdhci: Secure Digital Host Controller Interface driver
- [ 2.373548] sdhci: Copyright(c) Pierre Ossman
- [ 2.379870] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.385652] NET: Registered protocol family 10
- [ 2.391331] Segment Routing with IPv6
- [ 2.394287] NET: Registered protocol family 17
- [ 2.398107] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 2.402909] 8021q: 802.1Q VLAN Support v1.8
- [ 2.415500] Registering SWP/SWPB emulation handler
- [ 2.431565] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
- [ 2.443777] s1a: supplied by regulator-dummy
- [ 2.443877] s1a: Bringing 0uV into 1050000-1050000uV
- [ 2.447466] s1b: supplied by regulator-dummy
- [ 2.452108] s1b: Bringing 0uV into 1050000-1050000uV
- [ 2.456614] s2a: supplied by regulator-dummy
- [ 2.461325] s2a: Bringing 0uV into 775000-775000uV
- [ 2.465832] s2b: supplied by regulator-dummy
- [ 2.470173] s2b: Bringing 0uV into 775000-775000uV
- [ 2.479430] UBI: auto-attach mtd6
- [ 2.479463] ubi0: attaching mtd6
- [ 2.531197] random: crng init done
- [ 3.186623] ubi0: scanning is finished
- [ 3.196139] ubi0: attached mtd6 (name "ubi", size 96 MiB)
- [ 3.196159] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 3.200507] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 3.207359] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 3.214135] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
- [ 3.220968] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
- [ 3.227219] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1708271965
- [ 3.234190] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
- [ 3.243629] ubi0: background thread "ubi_bgt0d" started, PID 59
- [ 3.244302] block ubiblock0_0: created from ubi0:0(rootfs)
- [ 3.258396] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
- [ 3.263877] hctosys: unable to open rtc device (rtc0)
- [ 3.275543] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
- [ 3.277224] Freeing unused kernel memory: 1024K
- [ 3.716911] init: Console is alive
- [ 3.717030] init: - watchdog -
- [ 4.627630] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 4.648016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.650455] SCSI subsystem initialized
- [ 4.656361] libata version 3.00 loaded.
- [ 4.658940] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
- [ 4.659002] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 4.663320] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
- [ 4.672775] scsi host0: ahci
- [ 4.680452] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
- [ 5.017103] ata1: SATA link down (SStatus 0 SControl 300)
- [ 5.020302] ehci-platform: EHCI generic platform driver
- [ 5.027282] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 5.028166] ohci-platform: OHCI generic platform driver
- [ 5.160985] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 5.161064] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 5.165802] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
- [ 5.173092] xhci-hcd xhci-hcd.0.auto: irq 105, io mem 0x11000000
- [ 5.183050] hub 1-0:1.0: USB hub found
- [ 5.188743] hub 1-0:1.0: 1 port detected
- [ 5.192291] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 5.196255] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 5.201481] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 5.209190] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.215990] hub 2-0:1.0: USB hub found
- [ 5.223980] hub 2-0:1.0: 1 port detected
- [ 5.227802] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 5.231608] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
- [ 5.237093] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
- [ 5.244533] xhci-hcd xhci-hcd.1.auto: irq 106, io mem 0x10000000
- [ 5.254203] hub 3-0:1.0: USB hub found
- [ 5.260169] hub 3-0:1.0: 1 port detected
- [ 5.263812] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 5.267789] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
- [ 5.273008] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 5.280712] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.287553] hub 4-0:1.0: USB hub found
- [ 5.295613] hub 4-0:1.0: 1 port detected
- [ 5.300549] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 5.309367] init: - preinit -
- [ 7.078731] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
- [ 7.079420] dwmac1000: Master AXI performs any burst length
- [ 7.087702] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
- [ 7.093079] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
- [ 7.102467] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 8.156808] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
- [ 8.158661] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 10.305024] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 142
- [ 10.369553] UBIFS (ubi0:1): recovery needed
- [ 10.878040] UBIFS (ubi0:1): recovery completed
- [ 10.878150] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
- [ 10.881453] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 10.889401] UBIFS (ubi0:1): FS size: 90406912 bytes (86 MiB, 712 LEBs), journal size 4571136 bytes (4 MiB, 36 LEBs)
- [ 10.899318] UBIFS (ubi0:1): reserved for root: 4270141 bytes (4170 KiB)
- [ 10.909513] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 38E9FF1F-E971-477C-862C-EBB315CB9D3D, small LPT model
- [ 10.923640] mount_root: switching to ubifs overlay
- [ 10.961341] urandom-seed: Seeding with /etc/urandom.seed
- [ 11.203528] procd: - early -
- [ 11.203716] procd: - watchdog -
- [ 11.841824] procd: - watchdog -
- [ 11.842432] procd: - ubus -
- [ 11.910639] procd: - init -
- [ 13.006123] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 13.016613] urngd: v1.0.2 started.
- [ 13.017653] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 13.022727] Loading modules backported from Linux version v4.19.98-0-gd183c8e2647a
- [ 13.024433] Backport generated by backports.git v4.19.98-1-0-g8204eb99
- [ 13.032567] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 13.041130] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
- [ 13.078178] wireguard: WireGuard 0.0.20190702 loaded. See www.wireguard.com for information.
- [ 13.078204] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- [ 13.090378] xt_time: kernel timezone is -0000
- [ 13.123520] PPP generic driver version 2.4.2
- [ 13.124312] NET: Registered protocol family 24
- [ 13.132676] ath10k_pci 0000:01:00.0: assign IRQ: got 67
- [ 13.132698] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x46.
- [ 13.133121] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
- [ 13.139658] ath10k_pci 0000:01:00.0: enabling bus mastering
- [ 13.140121] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 13.318631] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
- [ 13.318674] ath10k_pci 0000:01:00.0: Falling back to user helper
- [ 13.483347] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
- [ 13.485336] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-5.bin failed with error -2
- [ 13.491213] ath10k_pci 0000:01:00.0: Falling back to user helper
- [ 13.520547] firmware ath10k!QCA9984!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
- [ 13.520732] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-2.bin failed with error -2
- [ 13.528854] ath10k_pci 0000:01:00.0: Falling back to user helper
- [ 13.556163] firmware ath10k!QCA9984!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
- [ 13.556329] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
- [ 13.564473] ath10k_pci 0000:01:00.0: Falling back to user helper
- [ 13.589599] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
- [ 13.791562] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
- [ 13.791595] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 13.802706] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 877928bc
- [ 16.129847] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
- [ 21.975650] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 21.975675] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
- [ 22.057509] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 22.058360] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
- [ 22.283902] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
- [ 22.401236] ath: EEPROM regdomain: 0x0
- [ 22.401246] ath: EEPROM indicates default country code should be used
- [ 22.401252] ath: doing EEPROM country->regdmn map search
- [ 22.401263] ath: country maps to regdmn code: 0x3a
- [ 22.401269] ath: Country alpha2 being used: US
- [ 22.401275] ath: Regpair used: 0x3a
- [ 22.405152] ath10k_pci 0001:01:00.0: assign IRQ: got 100
- [ 22.405187] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x46.
- [ 22.406075] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
- [ 22.412095] ath10k_pci 0001:01:00.0: enabling bus mastering
- [ 22.412720] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 22.586139] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0001:01:00.0.txt failed with error -2
- [ 22.586175] ath10k_pci 0001:01:00.0: Falling back to user helper
- [ 22.770070] firmware ath10k!fwcfg-pci-0001:01:00.0.txt: firmware_loading_store: map pages failed
- [ 22.794559] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-5.bin failed with error -2
- [ 22.794594] ath10k_pci 0001:01:00.0: Falling back to user helper
- [ 22.840805] firmware ath10k!QCA9984!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
- [ 22.841046] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-2.bin failed with error -2
- [ 22.849127] ath10k_pci 0001:01:00.0: Falling back to user helper
- [ 22.893514] firmware ath10k!QCA9984!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
- [ 22.893794] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
- [ 22.901847] ath10k_pci 0001:01:00.0: Falling back to user helper
- [ 22.951416] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
- [ 22.951683] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
- [ 22.959420] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 22.972548] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-012-17ba98334 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 877928bc
- [ 25.330228] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734
- [ 31.230155] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 31.230183] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
- [ 31.314167] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 31.315050] ath10k_pci 0001:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
- [ 31.686203] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
- [ 31.787535] ath: EEPROM regdomain: 0x0
- [ 31.787549] ath: EEPROM indicates default country code should be used
- [ 31.787559] ath: doing EEPROM country->regdmn map search
- [ 31.787577] ath: country maps to regdmn code: 0x3a
- [ 31.787590] ath: Country alpha2 being used: US
- [ 31.787600] ath: Regpair used: 0x3a
- [ 31.796524] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 36.662033] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
- [ 36.663135] dwmac1000: Master AXI performs any burst length
- [ 36.671069] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
- [ 36.676540] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
- [ 36.685550] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 36.704477] br-lan: port 1(eth1.1) entered blocking state
- [ 36.704510] br-lan: port 1(eth1.1) entered disabled state
- [ 36.709121] device eth1.1 entered promiscuous mode
- [ 36.714239] device eth1 entered promiscuous mode
- [ 36.726937] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 36.739170] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
- [ 36.740513] dwmac1000: Master AXI performs any burst length
- [ 36.748202] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
- [ 36.753600] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
- [ 36.763134] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 36.776078] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
- [ 37.649559] ath: EEPROM regdomain: 0x8210
- [ 37.649595] ath: EEPROM indicates we should expect a country code
- [ 37.652629] ath: doing EEPROM country->regdmn map search
- [ 37.658758] ath: country maps to regdmn code: 0x37
- [ 37.664070] ath: Country alpha2 being used: NL
- [ 37.668748] ath: Regpair used: 0x37
- [ 37.673075] ath: regdomain 0x8210 dynamically updated by user
- [ 37.676743] ath: EEPROM regdomain: 0x8210
- [ 37.682375] ath: EEPROM indicates we should expect a country code
- [ 37.686495] ath: doing EEPROM country->regdmn map search
- [ 37.692459] ath: country maps to regdmn code: 0x37
- [ 37.697931] ath: Country alpha2 being used: NL
- [ 37.704468] ath: Regpair used: 0x37
- [ 37.706808] ath: regdomain 0x8210 dynamically updated by user
- [ 37.830826] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
- [ 37.835983] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
- [ 37.844926] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 37.854683] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 37.915120] br-lan: port 1(eth1.1) entered blocking state
- [ 37.915149] br-lan: port 1(eth1.1) entered forwarding state
- [ 37.919708] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
- [ 37.954657] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 46.912394] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 46.912429] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
- [ 46.996286] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 46.997165] ath10k_pci 0001:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
- [ 47.616207] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 47.616436] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
- [ 47.910730] ath10k_pci 0001:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
- [ 53.571792] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 53.571826] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
- [ 53.653746] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
- [ 53.654605] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
- [ 54.008470] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 54.008766] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 54.019883] br-lan: port 2(wlan1) entered blocking state
- [ 54.024363] br-lan: port 2(wlan1) entered disabled state
- [ 54.030191] device wlan1 entered promiscuous mode
- [ 54.039172] br-lan: port 3(wlan0) entered blocking state
- [ 54.039687] br-lan: port 3(wlan0) entered disabled state
- [ 54.045359] device wlan0 entered promiscuous mode
- [ 54.444502] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 54.444769] br-lan: port 2(wlan1) entered blocking state
- [ 54.449945] br-lan: port 2(wlan1) entered forwarding state
- [ 54.816829] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 54.816976] br-lan: port 3(wlan0) entered blocking state
- [ 54.822247] br-lan: port 3(wlan0) entered forwarding state
- [ 80.584885] ath10k_pci 0000:01:00.0: Invalid VHT mcs 15 peer stats
- [ 5878.256576] ath10k_pci 0000:01:00.0: Invalid peer id 6 or peer stats buffer, peer: (null) sta: (null)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement