API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 18th, 2022
31
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 38.84 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 5.10.136 (builder@buildhost) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.3.0 r20337-a66f843971) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Aug 15 17:30:11 2022
  3. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] OF: fdt: Machine model: Linksys EA9500
  6. [ 0.000000] Memory policy: Data cache writealloc
  7. [ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
  8. [ 0.000000] Zone ranges:
  9. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  10. [ 0.000000] HighMem [mem 0x0000000008000000-0x000000008fffffff]
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  14. [ 0.000000] node 0: [mem 0x0000000088000000-0x000000008fffffff]
  15. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000008fffffff]
  16. [ 0.000000] On node 0 totalpages: 65536
  17. [ 0.000000] Normal zone: 288 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  20. [ 0.000000] HighMem zone: 32768 pages, LIFO batch:7
  21. [ 0.000000] percpu: Embedded 14 pages/cpu s27596 r8192 d21556 u57344
  22. [ 0.000000] pcpu-alloc: s27596 r8192 d21556 u57344 alloc=14*4096
  23. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  24. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65248
  25. [ 0.000000] Kernel command line: console=ttyS0,115200
  26. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  27. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
  28. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  29. [ 0.000000] Memory: 249444K/262144K available (6227K kernel code, 570K rwdata, 1404K rodata, 1024K init, 295K bss, 12700K reserved, 0K cma-reserved, 131072K highmem)
  30. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  31. [ 0.000000] rcu: Hierarchical RCU implementation.
  32. [ 0.000000] Tracing variant of Tasks RCU enabled.
  33. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  34. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  35. [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
  36. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  37. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  38. [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
  39. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  40. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
  41. [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
  42. [ 0.000009] sched_clock: 64 bits at 700MHz, resolution 1ns, wraps every 4398046511103ns
  43. [ 0.000024] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xa17102bcf3, max_idle_ns: 440795224838 ns
  44. [ 0.000043] Switching to timer-based delay loop, resolution 1ns
  45. [ 0.000254] Calibrating delay loop (skipped), value calculated using timer frequency.. 1400.00 BogoMIPS (lpj=7000000)
  46. [ 0.000265] pid_max: default: 32768 minimum: 301
  47. [ 0.000352] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  48. [ 0.000360] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  49. [ 0.000897] CPU: Testing write buffer coherency: ok
  50. [ 0.000935] CPU0: Spectre v2: using BPIALL workaround
  51. [ 0.001141] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  52. [ 0.001610] Setting up static identity map for 0x100000 - 0x10003c
  53. [ 0.001725] rcu: Hierarchical SRCU implementation.
  54. [ 0.001854] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
  55. [ 0.002004] smp: Bringing up secondary CPUs ...
  56. [ 0.002599] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  57. [ 0.002606] CPU1: Spectre v2: using BPIALL workaround
  58. [ 0.002697] smp: Brought up 1 node, 2 CPUs
  59. [ 0.002705] SMP: Total of 2 processors activated (2800.00 BogoMIPS).
  60. [ 0.002710] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
  61. [ 0.002714] CPU: This may indicate a broken bootloader or firmware.
  62. [ 0.004857] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  63. [ 0.004878] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  64. [ 0.004998] pinctrl core: initialized pinctrl subsystem
  65. [ 0.005657] NET: Registered protocol family 16
  66. [ 0.006249] DMA: preallocated 256 KiB pool for atomic coherent allocations
  67. [ 0.006974] thermal_sys: Registered thermal governor 'step_wise'
  68. [ 0.031271] clocksource: Switched to clocksource arm_global_timer
  69. [ 0.032152] NET: Registered protocol family 2
  70. [ 0.032315] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
  71. [ 0.033198] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  72. [ 0.033264] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  73. [ 0.033284] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
  74. [ 0.033300] TCP: Hash tables configured (established 1024 bind 1024)
  75. [ 0.033402] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  76. [ 0.033450] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  77. [ 0.033703] NET: Registered protocol family 1
  78. [ 0.033745] PCI: CLS 0 bytes, default 64
  79. [ 0.035313] workingset: timestamp_bits=14 max_order=16 bucket_order=2
  80. [ 0.037325] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  81. [ 0.037340] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  82. [ 0.037783] bounce: pool size: 64 pages
  83. [ 0.037841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  84. [ 0.039248] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  85. [ 0.040591] printk: console [ttyS0] disabled
  86. [ 0.040666] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 26, base_baud = 7812500) is a 16550
  87. [ 0.559337] printk: console [ttyS0] enabled
  88. [ 0.564377] bcm2835-rng 18004000.rng: hwrng registered
  89. [ 0.691817] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xf1
  90. [ 0.698193] nand: Toshiba NAND 128MiB 3,3V 8-bit
  91. [ 0.702847] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  92. [ 0.710445] iproc_nand 18028000.nand-controller: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
  93. [ 0.721372] Scanning device for bad blocks
  94. [ 1.198857] Bad eraseblock 768 at 0x000006000000
  95. [ 1.209891] random: crng init done
  96. [ 1.361230] 6 fixed-partitions partitions found on MTD device brcmnand.0
  97. [ 1.368480] Creating 6 MTD partitions on "brcmnand.0":
  98. [ 1.373686] 0x000000000000-0x000000080000 : "boot"
  99. [ 1.378974] 0x000000080000-0x000000180000 : "nvram"
  100. [ 1.384371] 0x000000180000-0x000000200000 : "devinfo"
  101. [ 1.389868] 0x000000200000-0x000001f00000 : "firmware"
  102. [ 1.396280] 2 trx partitions found on MTD device firmware
  103. [ 1.401728] Creating 2 MTD partitions on "firmware":
  104. [ 1.406710] 0x00000000001c-0x000000400000 : "linux"
  105. [ 1.411607] mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only
  106. [ 1.421256] 0x000000400000-0x000001d00000 : "ubi"
  107. [ 1.426484] 0x000001f00000-0x000003c00000 : "backup"
  108. [ 1.431981] 0x000005200000-0x000008000000 : "system"
  109. [ 1.440119] bcm_iproc 18029200.spi: using bspi-mspi mode
  110. [ 1.447388] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
  111. [ 1.482635] bcm53xx 0.200:00: found switch: BCM53125, rev 4
  112. [ 1.488262] bcm53xx 0.200:00: failed to register switch: -517
  113. [ 1.494400] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
  114. [ 1.502295] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  115. [ 1.508385] bcma-host-soc 18000000.axi: bus0: Found chip with id 53030, rev 0x00 and package 0x00
  116. [ 1.517372] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
  117. [ 1.527939] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  118. [ 1.527948] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
  119. [ 1.538690] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  120. [ 1.538698] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
  121. [ 1.548692] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  122. [ 1.559091] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  123. [ 1.569492] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  124. [ 1.579901] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
  125. [ 1.590253] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
  126. [ 1.600781] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
  127. [ 1.611330] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
  128. [ 1.621888] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  129. [ 1.621895] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
  130. [ 1.633915] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
  131. [ 1.644286] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
  132. [ 1.654668] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  133. [ 1.654675] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
  134. [ 1.664871] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  135. [ 1.664879] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
  136. [ 1.674910] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  137. [ 1.674917] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
  138. [ 1.686251] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  139. [ 1.686259] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
  140. [ 1.698981] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  141. [ 1.698988] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
  142. [ 1.709047] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
  143. [ 1.720644] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
  144. [ 1.720651] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
  145. [ 1.732093] bcma-host-soc 18000000.axi: bus0: Flash type not supported
  146. [ 1.746689] can not parse nvram name (null)boardnum(null) with value 20150630 got -34
  147. [ 1.768414] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 8 provided by platform.
  148. [ 1.768664] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS)
  149. [ 1.774285] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
  150. [ 1.780835] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
  151. [ 1.787128] bgmac_bcma bcma0:3: Using random MAC: 1e:a1:0a:3f:15:23
  152. [ 1.794228] b53-srab-switch b53-srab-switch: invalid resource
  153. [ 1.800010] b53-srab-switch: probe of b53-srab-switch failed with error -22
  154. [ 1.807639] bgmac_bcma bcma0:4: Found PHY addr: 30 (NOREGS)
  155. [ 1.813281] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
  156. [ 1.819830] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
  157. [ 1.826125] bgmac_bcma bcma0:4: Using random MAC: 8e:02:ca:90:27:c6
  158. [ 1.833779] bgmac_bcma bcma0:5: Found PHY addr: 30 (NOREGS)
  159. [ 1.839388] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
  160. [ 1.847332] bgmac_bcma bcma0:6: Unsupported core_unit 3
  161. [ 1.852681] bgmac_bcma: probe of bcma0:6 failed with error -524
  162. [ 1.858726] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
  163. [ 1.866255] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
  164. [ 1.875864] OF: /axi@18000000/pcie@12000: Missing device_type
  165. [ 1.881636] pcie_iproc_bcma bcma0:7: non-prefetchable memory resource required
  166. [ 2.001078] pcie_iproc_bcma bcma0:7: link: UP
  167. [ 2.005562] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
  168. [ 2.011875] pci_bus 0000:00: root bus resource [bus 00-ff]
  169. [ 2.017372] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
  170. [ 2.024292] pci 0000:00:00.0: [14e4:d612] type 01 class 0x060400
  171. [ 2.030317] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  172. [ 2.040044] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
  173. [ 2.046969] PCI: bus0: Fast back to back transfers disabled
  174. [ 2.052584] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  175. [ 2.060741] pci 0000:01:00.0: [10b5:8603] type 01 class 0x060400
  176. [ 2.066798] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  177. [ 2.076507] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff]
  178. [ 2.082937] pci 0000:01:00.0: supports D1 D2
  179. [ 2.087212] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  180. [ 2.094671] PCI: bus1: Fast back to back transfers disabled
  181. [ 2.100264] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  182. [ 2.108524] pci 0000:02:01.0: [10b5:8603] type 01 class 0x060400
  183. [ 2.114580] pci_bus 0000:02: 2-byte config write to 0000:02:01.0 offset 0x4 may corrupt adjacent RW1C bits
  184. [ 2.124411] pci 0000:02:01.0: supports D1 D2
  185. [ 2.128695] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
  186. [ 2.135575] pci 0000:02:02.0: [10b5:8603] type 01 class 0x060400
  187. [ 2.141760] pci 0000:02:02.0: supports D1 D2
  188. [ 2.146042] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  189. [ 2.153511] PCI: bus2: Fast back to back transfers disabled
  190. [ 2.159105] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  191. [ 2.167152] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  192. [ 2.175354] pci 0000:03:00.0: [14e4:4365] type 00 class 0x028000
  193. [ 2.181413] pci_bus 0000:03: 2-byte config write to 0000:03:00.0 offset 0x4 may corrupt adjacent RW1C bits
  194. [ 2.191123] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  195. [ 2.197942] pci 0000:03:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
  196. [ 2.204765] pci 0000:03:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
  197. [ 2.212154] pci 0000:03:00.0: supports D1 D2
  198. [ 2.217275] PCI: bus3: Fast back to back transfers disabled
  199. [ 2.222892] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
  200. [ 2.229696] pci 0000:04:00.0: [14e4:4365] type 00 class 0x028000
  201. [ 2.235745] pci_bus 0000:04: 2-byte config write to 0000:04:00.0 offset 0x4 may corrupt adjacent RW1C bits
  202. [ 2.245467] pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  203. [ 2.252289] pci 0000:04:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
  204. [ 2.259104] pci 0000:04:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
  205. [ 2.266493] pci 0000:04:00.0: supports D1 D2
  206. [ 2.271648] PCI: bus4: Fast back to back transfers disabled
  207. [ 2.277245] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
  208. [ 2.283891] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 04
  209. [ 2.290526] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04
  210. [ 2.297187] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x099fffff]
  211. [ 2.304004] pci 0000:00:00.0: BAR 9: assigned [mem 0x09a00000-0x09cfffff 64bit pref]
  212. [ 2.311780] pci 0000:01:00.0: BAR 8: assigned [mem 0x08000000-0x097fffff]
  213. [ 2.318583] pci 0000:01:00.0: BAR 9: assigned [mem 0x09a00000-0x09cfffff 64bit pref]
  214. [ 2.326354] pci 0000:01:00.0: BAR 0: assigned [mem 0x09800000-0x09803fff]
  215. [ 2.333162] pci 0000:01:00.0: BAR 7: no space for [io size 0x1000]
  216. [ 2.339445] pci 0000:01:00.0: BAR 7: failed to assign [io size 0x1000]
  217. [ 2.346080] pci 0000:02:01.0: BAR 8: assigned [mem 0x08000000-0x08bfffff]
  218. [ 2.352892] pci 0000:02:02.0: BAR 8: assigned [mem 0x08c00000-0x097fffff]
  219. [ 2.359692] pci 0000:02:01.0: BAR 9: assigned [mem 0x09a00000-0x09bfffff 64bit pref]
  220. [ 2.367466] pci 0000:02:02.0: BAR 9: assigned [mem 0x09c00000-0x09cfffff 64bit pref]
  221. [ 2.375234] pci 0000:02:01.0: BAR 7: no space for [io size 0x1000]
  222. [ 2.381518] pci 0000:02:01.0: BAR 7: failed to assign [io size 0x1000]
  223. [ 2.388148] pci 0000:03:00.0: BAR 2: assigned [mem 0x08000000-0x087fffff 64bit]
  224. [ 2.395495] pci 0000:03:00.0: BAR 4: assigned [mem 0x09a00000-0x09afffff 64bit pref]
  225. [ 2.403275] pci 0000:03:00.0: BAR 0: assigned [mem 0x08800000-0x08807fff 64bit]
  226. [ 2.410615] pci 0000:02:01.0: PCI bridge to [bus 03]
  227. [ 2.415599] pci 0000:02:01.0: bridge window [mem 0x08000000-0x08bfffff]
  228. [ 2.422415] pci 0000:02:01.0: bridge window [mem 0x09a00000-0x09bfffff 64bit pref]
  229. [ 2.430183] pci 0000:04:00.0: BAR 2: assigned [mem 0x09000000-0x097fffff 64bit]
  230. [ 2.437526] pci 0000:04:00.0: BAR 4: assigned [mem 0x09c00000-0x09cfffff 64bit pref]
  231. [ 2.445306] pci 0000:04:00.0: BAR 0: assigned [mem 0x08c00000-0x08c07fff 64bit]
  232. [ 2.452652] pci 0000:02:02.0: PCI bridge to [bus 04]
  233. [ 2.457631] pci 0000:02:02.0: bridge window [mem 0x08c00000-0x097fffff]
  234. [ 2.464442] pci 0000:02:02.0: bridge window [mem 0x09c00000-0x09cfffff 64bit pref]
  235. [ 2.472209] pci 0000:01:00.0: PCI bridge to [bus 02-04]
  236. [ 2.477450] pci 0000:01:00.0: bridge window [mem 0x08000000-0x097fffff]
  237. [ 2.484264] pci 0000:01:00.0: bridge window [mem 0x09a00000-0x09cfffff 64bit pref]
  238. [ 2.492037] pci 0000:00:00.0: PCI bridge to [bus 01-04]
  239. [ 2.497276] pci 0000:00:00.0: bridge window [mem 0x08000000-0x099fffff]
  240. [ 2.504078] pci 0000:00:00.0: bridge window [mem 0x09a00000-0x09cfffff 64bit pref]
  241. [ 2.512055] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
  242. [ 2.519575] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
  243. [ 2.529195] pcie_iproc_bcma bcma0:8: non-prefetchable memory resource required
  244. [ 2.651078] pcie_iproc_bcma bcma0:8: link: UP
  245. [ 2.655565] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
  246. [ 2.661881] pci_bus 0001:00: root bus resource [bus 00-ff]
  247. [ 2.667379] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27ffffff]
  248. [ 2.674305] pci 0001:00:00.0: [14e4:d612] type 01 class 0x060400
  249. [ 2.680323] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
  250. [ 2.690048] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
  251. [ 2.696981] PCI: bus0: Fast back to back transfers disabled
  252. [ 2.702592] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  253. [ 2.710735] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
  254. [ 2.716782] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
  255. [ 2.726489] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  256. [ 2.733307] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
  257. [ 2.740115] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
  258. [ 2.747442] pci 0001:01:00.0: supports D1 D2
  259. [ 2.752543] PCI: bus1: Fast back to back transfers disabled
  260. [ 2.758142] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
  261. [ 2.764807] pci 0001:00:00.0: BAR 8: assigned [mem 0x20000000-0x20bfffff]
  262. [ 2.771624] pci 0001:00:00.0: BAR 9: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
  263. [ 2.779384] pci 0001:01:00.0: BAR 2: assigned [mem 0x20000000-0x207fffff 64bit]
  264. [ 2.786729] pci 0001:01:00.0: BAR 4: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
  265. [ 2.794506] pci 0001:01:00.0: BAR 0: assigned [mem 0x20800000-0x20807fff 64bit]
  266. [ 2.801843] pci 0001:00:00.0: PCI bridge to [bus 01]
  267. [ 2.806817] pci 0001:00:00.0: bridge window [mem 0x20000000-0x20bfffff]
  268. [ 2.813628] pci 0001:00:00.0: bridge window [mem 0x20c00000-0x20cfffff 64bit pref]
  269. [ 2.821590] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
  270. [ 2.829107] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
  271. [ 2.838732] pcie_iproc_bcma bcma0:9: non-prefetchable memory resource required
  272. [ 2.961074] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
  273. [ 2.967273] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
  274. [ 2.974035] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
  275. [ 2.983102] bcma-host-soc 18000000.axi: bus0: Bus registered
  276. [ 2.989636] NET: Registered protocol family 10
  277. [ 2.995043] Segment Routing with IPv6
  278. [ 2.998765] NET: Registered protocol family 17
  279. [ 3.003309] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  280. [ 3.016433] 8021q: 802.1Q VLAN Support v1.8
  281. [ 3.020669] Registering SWP/SWPB emulation handler
  282. [ 3.054286] bcm53xx 0.200:00: found switch: BCM53125, rev 4
  283. [ 3.059915] bcm53xx 0.200:00: failed to register switch: -517
  284. [ 3.065878] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
  285. [ 3.195301] b53-srab-switch 18007000.ethernet-switch lan7 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL)
  286. [ 3.207690] b53-srab-switch 18007000.ethernet-switch lan4 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
  287. [ 3.220071] b53-srab-switch 18007000.ethernet-switch lan8 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
  288. [ 3.232456] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] (irq=POLL)
  289. [ 3.244273] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
  290. [ 3.255117] DSA: tree 0 setup
  291. [ 3.284390] bcm53xx 0.200:00: found switch: BCM53125, rev 4
  292. [ 3.290020] bcm53xx 0.200:00: Port 8 is stacked to Broadcom tag switch
  293. [ 3.957104] bcm53xx 0.200:00 lan1 (uninitialized): PHY [dsa-1.0:00] driver [Broadcom BCM53125] (irq=POLL)
  294. [ 4.007103] bcm53xx 0.200:00 lan5 (uninitialized): PHY [dsa-1.0:01] driver [Broadcom BCM53125] (irq=POLL)
  295. [ 4.057105] bcm53xx 0.200:00 lan2 (uninitialized): PHY [dsa-1.0:02] driver [Broadcom BCM53125] (irq=POLL)
  296. [ 4.107104] bcm53xx 0.200:00 lan6 (uninitialized): PHY [dsa-1.0:03] driver [Broadcom BCM53125] (irq=POLL)
  297. [ 4.157102] bcm53xx 0.200:00 lan3 (uninitialized): PHY [dsa-1.0:04] driver [Broadcom BCM53125] (irq=POLL)
  298. [ 4.241077] bcm53xx 0.200:00: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
  299. [ 4.285196] DSA: tree 1 setup
  300. [ 4.288543] UBI: auto-attach mtd5
  301. [ 4.291925] ubi0: attaching mtd5
  302. [ 4.430106] ubi0: scanning is finished
  303. [ 4.442267] ubi0: attached mtd5 (name "ubi", size 25 MiB)
  304. [ 4.447696] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  305. [ 4.454613] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  306. [ 4.461426] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  307. [ 4.468399] ubi0: good PEBs: 200, bad PEBs: 0, corrupted PEBs: 0
  308. [ 4.474422] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  309. [ 4.481662] ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1660584611
  310. [ 4.490812] ubi0: available PEBs: 0, total reserved PEBs: 200, PEBs reserved for bad PEB handling: 20
  311. [ 4.500089] ubi0: background thread "ubi_bgt0d" started, PID 525
  312. [ 4.506938] block ubiblock0_0: created from ubi0:0(rootfs)
  313. [ 4.512484] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  314. [ 4.522814] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  315. [ 4.530732] Freeing unused kernel memory: 1024K
  316. [ 4.561201] Run /sbin/init as init process
  317. [ 4.565308] with arguments:
  318. [ 4.565311] /sbin/init
  319. [ 4.565313] with environment:
  320. [ 4.565316] HOME=/
  321. [ 4.565318] TERM=linux
  322. [ 4.766897] init: Console is alive
  323. [ 4.770506] init: - watchdog -
  324. [ 5.092125] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  325. [ 5.144363] usbcore: registered new interface driver usbfs
  326. [ 5.149940] usbcore: registered new interface driver hub
  327. [ 5.155349] usbcore: registered new device driver usb
  328. [ 5.163578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  329. [ 5.170945] ehci-fsl: Freescale EHCI Host controller driver
  330. [ 5.178035] ehci-platform: EHCI generic platform driver
  331. [ 5.186223] ehci-platform 18021000.usb: EHCI Host Controller
  332. [ 5.188759] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  333. [ 5.192030] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
  334. [ 5.199254] ohci-platform: OHCI generic platform driver
  335. [ 5.206278] ehci-platform 18021000.usb: irq 45, io mem 0x18021000
  336. [ 5.211561] ohci-platform 18022000.usb: Generic Platform OHCI controller
  337. [ 5.224296] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
  338. [ 5.232246] ohci-platform 18022000.usb: irq 45, io mem 0x18022000
  339. [ 5.241134] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
  340. [ 5.247804] hub 1-0:1.0: USB hub found
  341. [ 5.251655] hub 1-0:1.0: 2 ports detected
  342. [ 5.305606] hub 2-0:1.0: USB hub found
  343. [ 5.309552] hub 2-0:1.0: 2 ports detected
  344. [ 5.341087] xhci-hcd 18023000.usb: xHCI Host Controller
  345. [ 5.346350] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 3
  346. [ 5.354031] xhci-hcd 18023000.usb: hcc params 0x02501164 hci version 0x100 quirks 0x0000100000010010
  347. [ 5.363239] xhci-hcd 18023000.usb: irq 46, io mem 0x18023000
  348. [ 5.369498] hub 3-0:1.0: USB hub found
  349. [ 5.373344] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
  350. [ 5.380640] xhci-hcd 18023000.usb: xHCI Host Controller
  351. [ 5.385930] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 4
  352. [ 5.393369] xhci-hcd 18023000.usb: Host supports USB 3.0 SuperSpeed
  353. [ 5.401152] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  354. [ 5.409667] hub 4-0:1.0: USB hub found
  355. [ 5.413512] hub 4-0:1.0: 1 port detected
  356. [ 5.420502] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  357. [ 5.430698] init: - preinit -
  358. [ 6.412564] b53-srab-switch 18007000.ethernet-switch extsw: configuring for fixed/ link mode
  359. [ 6.421175] 8021q: adding VLAN 0 to HW filter on device extsw
  360. [ 6.427023] bgmac_bcma bcma0:5 eth2: Link is Up - 1Gbps/Full - flow control off
  361. [ 6.434441] b53-srab-switch 18007000.ethernet-switch extsw: Link is Up - 1Gbps/Full - flow control off
  362. [ 6.671089] bcm53xx 0.200:00 lan1: configuring for phy/gmii link mode
  363. [ 6.677654] 8021q: adding VLAN 0 to HW filter on device lan1
  364. [ 6.723094] bcm53xx 0.200:00 lan1: Link is Up - 1Gbps/Full - flow control off
  365. [ 7.011108] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  366. [ 7.017566] IPv6: ADDRCONF(NETDEV_CHANGE): extsw: link becomes ready
  367. [ 7.024093] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
  368. [ 9.178938] UBIFS (ubi0:1): Mounting in unauthenticated mode
  369. [ 9.184759] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 697
  370. [ 9.234763] UBIFS (ubi0:1): recovery needed
  371. [ 9.324470] UBIFS (ubi0:1): recovery completed
  372. [ 9.329001] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  373. [ 9.336867] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  374. [ 9.346807] UBIFS (ubi0:1): FS size: 17141760 bytes (16 MiB, 135 LEBs), journal size 1015809 bytes (0 MiB, 7 LEBs)
  375. [ 9.357178] UBIFS (ubi0:1): reserved for root: 809647 bytes (790 KiB)
  376. [ 9.363639] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 9BC7ABE9-923A-44AE-AE9C-86127375D9FA, small LPT model
  377. [ 9.384070] mount_root: loading kmods from internal overlay
  378. [ 9.548360] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
  379. [ 9.666445] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
  380. [ 9.717481] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
  381. [ 9.728464] block: extroot: not configured
  382. [ 9.734644] mount_root: switching to ubifs overlay
  383. [ 9.749489] urandom-seed: Seeding with /etc/urandom.seed
  384. [ 9.819479] bcm53xx 0.200:00 lan1: Link is Down
  385. [ 10.003819] procd: - early -
  386. [ 10.006828] procd: - watchdog -
  387. [ 10.580833] procd: - watchdog -
  388. [ 10.586477] procd: - ubus -
  389. [ 10.644841] procd: - init -
  390. [ 11.049250] urngd: v1.0.2 started.
  391. [ 11.798171] kmodloader: loading kernel modules from /etc/modules.d/*
  392. [ 11.816104] GACT probability on
  393. [ 11.820293] Mirror/redirect action on
  394. [ 11.833537] u32 classifier
  395. [ 11.836255] input device check on
  396. [ 11.839918] Actions configured
  397. [ 11.860003] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
  398. [ 11.867670] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
  399. [ 11.910624] xt_time: kernel timezone is -0000
  400. [ 11.963875] PPP generic driver version 2.4.2
  401. [ 11.970046] NET: Registered protocol family 24
  402. [ 11.986153] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  403. [ 11.994062] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  404. [ 12.008922] usbcore: registered new interface driver brcmfmac
  405. [ 12.014888] pci 0000:00:00.0: enabling device (0140 -> 0142)
  406. [ 12.020574] pci 0000:01:00.0: enabling device (0140 -> 0142)
  407. [ 12.026278] pci 0000:02:01.0: enabling device (0140 -> 0142)
  408. [ 12.031965] brcmfmac 0000:03:00.0: enabling device (0140 -> 0142)
  409. [ 12.151420] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
  410. [ 12.160194] brcmfmac 0000:03:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.linksys,panamera.bin failed with error -2
  411. [ 12.387867] brcmfmac 0000:03:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.linksys,panamera.txt failed with error -2
  412. [ 12.399293] brcmfmac 0000:03:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
  413. [ 12.763950] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
  414. [ 12.772695] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
  415. [ 12.783977] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4366/4 wl0: Nov 5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
  416. [ 12.809117] pci 0000:02:02.0: enabling device (0140 -> 0142)
  417. [ 12.814900] brcmfmac 0000:04:00.0: enabling device (0140 -> 0142)
  418. [ 12.951244] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
  419. [ 12.959965] brcmfmac 0000:04:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.linksys,panamera.bin failed with error -2
  420. [ 12.975310] brcmfmac 0000:04:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.linksys,panamera.txt failed with error -2
  421. [ 12.986760] brcmfmac 0000:04:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
  422. [ 13.324061] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
  423. [ 13.332808] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
  424. [ 13.344675] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4366/4 wl0: Nov 5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
  425. [ 13.372741] pci 0001:00:00.0: enabling device (0140 -> 0142)
  426. [ 13.378463] brcmfmac 0001:01:00.0: enabling device (0140 -> 0142)
  427. [ 13.501534] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
  428. [ 13.510315] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.linksys,panamera.bin failed with error -2
  429. [ 13.526085] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.linksys,panamera.txt failed with error -2
  430. [ 13.537577] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
  431. [ 13.873889] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM4366/4
  432. [ 13.882614] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
  433. [ 13.893882] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4366/4 wl0: Nov 5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
  434. [ 13.926617] kmodloader: done loading kernel modules from /etc/modules.d/*
  435. [ 17.997432] b53-srab-switch 18007000.ethernet-switch extsw: Link is Down
  436. [ 18.101799] bgmac_bcma bcma0:5 eth2: Link is Up - 1Gbps/Full - flow control off
  437. [ 18.109180] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  438. [ 18.119283] b53-srab-switch 18007000.ethernet-switch extsw: configuring for fixed/ link mode
  439. [ 18.127954] 8021q: adding VLAN 0 to HW filter on device extsw
  440. [ 18.135463] b53-srab-switch 18007000.ethernet-switch extsw: Link is Up - 1Gbps/Full - flow control off
  441. [ 18.383233] bcm53xx 0.200:00 lan1: configuring for phy/gmii link mode
  442. [ 18.389863] 8021q: adding VLAN 0 to HW filter on device lan1
  443. [ 18.437436] bcm53xx 0.200:00 lan1: Link is Up - 1Gbps/Full - flow control off
  444. [ 18.718022] br-lan: port 1(lan1) entered blocking state
  445. [ 18.723306] br-lan: port 1(lan1) entered disabled state
  446. [ 18.805297] device lan1 entered promiscuous mode
  447. [ 18.809948] device extsw entered promiscuous mode
  448. [ 18.814843] device eth2 entered promiscuous mode
  449. [ 19.217508] IPv6: ADDRCONF(NETDEV_CHANGE): extsw: link becomes ready
  450. [ 19.275504] br-lan: port 1(lan1) entered blocking state
  451. [ 19.280757] br-lan: port 1(lan1) entered forwarding state
  452. [ 19.527503] bcm53xx 0.200:00 lan2: configuring for phy/gmii link mode
  453. [ 19.534187] 8021q: adding VLAN 0 to HW filter on device lan2
  454. [ 19.579456] bcm53xx 0.200:00 lan2: Link is Up - 1Gbps/Full - flow control rx/tx
  455. [ 19.859452] br-lan: port 2(lan2) entered blocking state
  456. [ 19.864728] br-lan: port 2(lan2) entered disabled state
  457. [ 19.958474] device lan2 entered promiscuous mode
  458. [ 20.297782] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  459. [ 20.304765] br-lan: port 2(lan2) entered blocking state
  460. [ 20.310021] br-lan: port 2(lan2) entered forwarding state
  461. [ 20.591179] bcm53xx 0.200:00 lan3: configuring for phy/gmii link mode
  462. [ 20.597900] 8021q: adding VLAN 0 to HW filter on device lan3
  463. [ 20.651200] bcm53xx 0.200:00 lan3: Link is Up - 1Gbps/Full - flow control rx/tx
  464. [ 20.935526] br-lan: port 3(lan3) entered blocking state
  465. [ 20.940801] br-lan: port 3(lan3) entered disabled state
  466. [ 21.047114] device lan3 entered promiscuous mode
  467. [ 21.385818] br-lan: port 3(lan3) entered blocking state
  468. [ 21.391091] br-lan: port 3(lan3) entered forwarding state
  469. [ 21.475523] b53-srab-switch 18007000.ethernet-switch lan4: configuring for phy/gmii link mode
  470. [ 21.484455] 8021q: adding VLAN 0 to HW filter on device lan4
  471. [ 21.491733] b53-srab-switch 18007000.ethernet-switch lan4: Link is Up - 100Mbps/Full - flow control rx/tx
  472. [ 21.541655] br-lan: port 4(lan4) entered blocking state
  473. [ 21.546914] br-lan: port 4(lan4) entered disabled state
  474. [ 21.553048] device lan4 entered promiscuous mode
  475. [ 21.641676] br-lan: port 4(lan4) entered blocking state
  476. [ 21.646930] br-lan: port 4(lan4) entered forwarding state
  477. [ 21.877095] bcm53xx 0.200:00 lan5: configuring for phy/gmii link mode
  478. [ 21.883724] 8021q: adding VLAN 0 to HW filter on device lan5
  479. [ 22.207538] br-lan: port 5(lan5) entered blocking state
  480. [ 22.212819] br-lan: port 5(lan5) entered disabled state
  481. [ 22.330965] device lan5 entered promiscuous mode
  482. [ 22.925091] bcm53xx 0.200:00 lan6: configuring for phy/gmii link mode
  483. [ 22.931725] 8021q: adding VLAN 0 to HW filter on device lan6
  484. [ 23.265527] br-lan: port 6(lan6) entered blocking state
  485. [ 23.270805] br-lan: port 6(lan6) entered disabled state
  486. [ 23.401095] device lan6 entered promiscuous mode
  487. [ 23.802312] b53-srab-switch 18007000.ethernet-switch lan7: configuring for phy/gmii link mode
  488. [ 23.811507] 8021q: adding VLAN 0 to HW filter on device lan7
  489. [ 23.818653] b53-srab-switch 18007000.ethernet-switch lan7: Link is Up - 1Gbps/Full - flow control rx/tx
  490. [ 23.871846] br-lan: port 7(lan7) entered blocking state
  491. [ 23.877103] br-lan: port 7(lan7) entered disabled state
  492. [ 23.882697] device lan7 entered promiscuous mode
  493. [ 23.971104] br-lan: port 7(lan7) entered blocking state
  494. [ 23.976355] br-lan: port 7(lan7) entered forwarding state
  495. [ 24.014304] b53-srab-switch 18007000.ethernet-switch lan8: configuring for phy/gmii link mode
  496. [ 24.023232] 8021q: adding VLAN 0 to HW filter on device lan8
  497. [ 24.081531] br-lan: port 8(lan8) entered blocking state
  498. [ 24.086832] br-lan: port 8(lan8) entered disabled state
  499. [ 24.092393] device lan8 entered promiscuous mode
  500. [ 24.212435] br-lan: port 9(extsw) entered blocking state
  501. [ 24.217900] br-lan: port 9(extsw) entered disabled state
  502. [ 24.311296] br-lan: port 9(extsw) entered blocking state
  503. [ 24.316654] br-lan: port 9(extsw) entered forwarding state
  504. [ 24.358245] b53-srab-switch 18007000.ethernet-switch wan: configuring for phy/gmii link mode
  505. [ 24.367350] 8021q: adding VLAN 0 to HW filter on device wan
  506. [ 24.377541] b53-srab-switch 18007000.ethernet-switch wan: Link is Up - 1Gbps/Full - flow control rx/tx
  507. [ 24.444251] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
  508. [ 26.989813] br-lan: port 10(wlan1) entered blocking state
  509. [ 26.995334] br-lan: port 10(wlan1) entered disabled state
  510. [ 27.001139] device wlan1 entered promiscuous mode
  511. [ 27.580575] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  512. [ 27.587651] br-lan: port 10(wlan1) entered blocking state
  513. [ 27.593151] br-lan: port 10(wlan1) entered forwarding state
  514. [ 28.169288] ieee80211 phy2: brcmf_cfg80211_start_ap: Set Channel failed: chspec=53372, -52
  515. [ 28.441980] br-lan: port 11(wlan0) entered blocking state
  516. [ 28.448313] br-lan: port 11(wlan0) entered disabled state
  517. [ 28.454066] device wlan0 entered promiscuous mode
  518. [ 31.015841] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  519. [ 31.022621] br-lan: port 11(wlan0) entered blocking state
  520. [ 31.028054] br-lan: port 11(wlan0) entered forwarding state
  521. [ 34.167779] ieee80211 phy2: brcmf_cfg80211_start_ap: Set Channel failed: chspec=53372, -52
  522. [ 40.188115] ieee80211 phy2: brcmf_cfg80211_start_ap: Set Channel failed: chspec=53372, -52
  523. [ 46.200229] ieee80211 phy2: brcmf_cfg80211_start_ap: Set Channel failed: chspec=53372, -52
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!