Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.4.0-rc6-armv7-x3 (liurenju@liurenju-ece) (gcc version 4.9.3 20150413 (prerelease) (Linaro GCC 4.9-2015.05) ) #188 SMP Wed Jan 20 14:57:09 EST 2016
- [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: TI OMAP4 PandaBoard-ES
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] Ducati: omap_rproc_reserve_cma
- [ 0.000000] cma: Reserved 512 MiB at 0x90000000
- [ 0.000000] Ducati: DMA declare contiguous successful
- [ 0.000000] cma: Reserved 24 MiB at 0xbe000000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier
- [ 0.000000] OMAP4460 ES1.1
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @cf573000 s23552 r8192 d21504 u53248
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259904
- [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 434140K/1046528K available (11854K kernel code, 1217K rwdata, 4364K rodata, 1036K init, 33439K bss, 63524K reserved, 548864K cma-reserved, 235520K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0fdec94 (16220 kB)
- [ 0.000000] .init : 0xc0fdf000 - 0xc10e2000 (1036 kB)
- [ 0.000000] .data : 0xc10e2000 - 0xc1212608 (1218 kB)
- [ 0.000000] .bss : 0xc1215000 - 0xc32bce34 (33440 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000
- [ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000
- [ 0.000000] L2C-310 erratum 769419 enabled
- [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
- [ 0.000000] OMAP L2C310: ROM does not support power control setting
- [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled
- [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
- [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e470000
- [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck
- [ 0.000000] ti_dt_clocks_register: failed to lookup clock node dss_fck
- [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk
- [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
- [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
- [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
- [ 0.005187] Console: colour dummy device 80x30
- [ 0.005218] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776)
- [ 0.087127] pid_max: default: 32768 minimum: 301
- [ 0.087280] Security Framework initialized
- [ 0.087310] Yama: becoming mindful.
- [ 0.087310] AppArmor: AppArmor disabled by boot time parameter
- [ 0.087524] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.087524] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.088287] Initializing cgroup subsys io
- [ 0.088317] Initializing cgroup subsys memory
- [ 0.088348] Initializing cgroup subsys devices
- [ 0.088348] Initializing cgroup subsys freezer
- [ 0.088378] Initializing cgroup subsys net_cls
- [ 0.088409] Initializing cgroup subsys perf_event
- [ 0.088409] Initializing cgroup subsys net_prio
- [ 0.088439] Initializing cgroup subsys pids
- [ 0.088500] CPU: Testing write buffer coherency: ok
- [ 0.088531] ftrace: allocating 37603 entries in 111 pages
- [ 0.167755] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.167877] Setting up static identity map for 0x80008280 - 0x80008318
- [ 0.257110] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.257232] Brought up 2 CPUs
- [ 0.257232] SMP: Total of 2 processors activated (2795.11 BogoMIPS).
- [ 0.257263] CPU: All CPU(s) started in SVC mode.
- [ 0.258178] devtmpfs: initialized
- [ 0.286041] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 0.288391] omap_hwmod: l3_main_3 using broken dt data from ocp
- [ 0.290283] omap_hwmod: l3_main_2 using broken dt data from ocp
- [ 0.342315] Ducati: All the reset line names are seq0 and looking for seq0
- [ 0.342315] Ducati: Hardware reset ASSERT has been called.
- [ 0.342346] Ducati: All the reset line names are seq0 and looking for seq1
- [ 0.342346] Ducati: All the reset line names are seq1 and looking for seq1
- [ 0.342346] Ducati: Hardware reset ASSERT has been called.
- [ 0.342346] Ducati: All the reset line names are seq0 and looking for logic
- [ 0.342376] Ducati: All the reset line names are seq1 and looking for logic
- [ 0.342376] Ducati: All the reset line names are logic and looking for logic
- [ 0.342376] Ducati: Hardware reset ASSERT has been called.
- [ 0.342407] Ducati: All the reset line names are dsp and looking for dsp
- [ 0.342437] Ducati: Hardware reset ASSERT has been called.
- [ 0.342590] Ducati: All the reset line names are cpu0 and looking for cpu0
- [ 0.342590] Ducati: Hardware reset ASSERT has been called.
- [ 0.342620] Ducati: All the reset line names are cpu0 and looking for cpu1
- [ 0.342620] Ducati: All the reset line names are cpu1 and looking for cpu1
- [ 0.342620] Ducati: Hardware reset ASSERT has been called.
- [ 0.396057] Ducati: All the reset line names are mmu_cache and looking for mmu_cache
- [ 0.396087] Ducati: Hardware reset ASSERT has been called.
- [ 0.396087] Ducati: All the reset line names are mmu_cache and looking for mmu_cache
- [ 0.396087] Ducati: Hardware reset ASSERT has been called.
- [ 0.396118] Ducati: All the reset line names are rst_global_warm_sw and looking for rst_global_warm_sw
- [ 0.396148] Ducati: All the reset line names are rst_global_warm_sw and looking for rst_global_cold_sw
- [ 0.396148] Ducati: All the reset line names are rst_global_cold_sw and looking for rst_global_cold_sw
- [ 0.398132] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.443756] xor: measuring software checksum speed
- [ 0.537109] arm4regs : 1094.800 MB/sec
- [ 0.637084] 8regs : 730.400 MB/sec
- [ 0.737091] 32regs : 755.600 MB/sec
- [ 0.837097] neon : 736.400 MB/sec
- [ 0.837127] xor: using function: arm4regs (1094.800 MB/sec)
- [ 0.837158] pinctrl core: initialized pinctrl subsystem
- [ 0.839324] NET: Registered protocol family 16
- [ 0.841979] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.850860] OMAP GPIO hardware version 0.1
- [ 0.855895] omap-gpmc 50000000.gpmc: GPMC revision 6.0
- [ 0.855926] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
- [ 0.856414] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 !
- [ 0.856719] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 !
- [ 0.857055] irq: no irq domain found for /ocp/l4@4a000000/scm@100000/pinmux@40 !
- [ 0.868530] platform 4b501000.aes: Cannot lookup hwmod 'aes'
- [ 0.868835] platform 480a5000.des: Cannot lookup hwmod 'des'
- [ 0.874847] No ATAGs?
- [ 0.874877] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.874908] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.876159] OMAP DMA hardware revision 0.0
- [ 0.878204] Serial: AMBA PL011 UART driver
- [ 1.087127] raid6: int32x1 gen() 88 MB/s
- [ 1.257263] raid6: int32x1 xor() 91 MB/s
- [ 1.427551] raid6: int32x2 gen() 128 MB/s
- [ 1.597381] raid6: int32x2 xor() 105 MB/s
- [ 1.767242] raid6: int32x4 gen() 167 MB/s
- [ 1.937133] raid6: int32x4 xor() 111 MB/s
- [ 2.107391] raid6: int32x8 gen() 154 MB/s
- [ 2.277313] raid6: int32x8 xor() 105 MB/s
- [ 2.447113] raid6: neonx1 gen() 555 MB/s
- [ 2.617126] raid6: neonx1 xor() 409 MB/s
- [ 2.787170] raid6: neonx2 gen() 592 MB/s
- [ 2.957153] raid6: neonx2 xor() 509 MB/s
- [ 3.127197] raid6: neonx4 gen() 625 MB/s
- [ 3.297180] raid6: neonx4 xor() 527 MB/s
- [ 3.467224] raid6: neonx8 gen() 467 MB/s
- [ 3.637207] raid6: neonx8 xor() 401 MB/s
- [ 3.637237] raid6: using algorithm neonx4 gen() 625 MB/s
- [ 3.637237] raid6: .... xor() 527 MB/s, rmw enabled
- [ 3.637237] raid6: using intx1 recovery algorithm
- [ 3.643554] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
- [ 3.717224] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_wl12xx_gpio, deferring probe
- [ 3.722656] omap-iommu 4a066000.mmu: 4a066000.mmu registered
- [ 3.722839] omap-iommu 55082000.mmu: 55082000.mmu registered
- [ 3.724914] SCSI subsystem initialized
- [ 3.725402] usbcore: registered new interface driver usbfs
- [ 3.725463] usbcore: registered new interface driver hub
- [ 3.725555] usbcore: registered new device driver usb
- [ 3.727478] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c1_pins, deferring probe
- [ 3.727539] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c2_pins, deferring probe
- [ 3.727569] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c3_pins, deferring probe
- [ 3.727600] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@100000/pinmux@40/pinmux_i2c4_pins, deferring probe
- [ 3.728088] media: Linux media interface: v0.10
- [ 3.728149] Linux video capture interface: v2.00
- [ 3.728240] pps_core: LinuxPPS API ver. 1 registered
- [ 3.728271] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 3.728271] PTP clock support registered
- [ 3.729034] omap-mailbox 4a0f4000.mailbox: omap mailbox rev 0x400
- [ 3.730285] NetLabel: Initializing
- [ 3.730316] NetLabel: domain hash size = 128
- [ 3.730316] NetLabel: protocols = UNLABELED CIPSOv4
- [ 3.730377] NetLabel: unlabeled traffic allowed by default
- [ 3.730895] clocksource: Switched to clocksource 32k_counter
- [ 3.833648] NET: Registered protocol family 2
- [ 3.834381] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 3.834472] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 3.834625] TCP: Hash tables configured (established 8192 bind 8192)
- [ 3.834716] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 3.834777] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 3.835083] NET: Registered protocol family 1
- [ 3.835540] RPC: Registered named UNIX socket transport module.
- [ 3.835571] RPC: Registered udp transport module.
- [ 3.835571] RPC: Registered tcp transport module.
- [ 3.835571] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 3.838226] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
- [ 3.841613] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 3.841735] audit: initializing netlink subsys (disabled)
- [ 3.841796] audit: type=2000 audit(3.790:1): initialized
- [ 3.842895] zbud: loaded
- [ 3.843200] VFS: Disk quotas dquot_6.6.0
- [ 3.843261] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 3.843933] NFS: Registering the id_resolver key type
- [ 3.843963] Key type id_resolver registered
- [ 3.843963] Key type id_legacy registered
- [ 3.843994] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 3.844238] fuse init (API version 7.23)
- [ 3.844482] SGI XFS with ACLs, security attributes, realtime, no debug enabled
- [ 3.847534] jitterentropy: Initialization failed with host not compliant with requirements: 2
- [ 3.847625] bounce: pool size: 64 pages
- [ 3.847686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 3.847839] io scheduler noop registered
- [ 3.847869] io scheduler deadline registered
- [ 3.847900] io scheduler cfq registered (default)
- [ 3.851959] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
- [ 3.852203] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
- [ 3.858184] tfp410 encoder@0: failed to find video source
- [ 3.858428] tpd12s015 encoder@1: failed to find video source
- [ 3.858673] connector-dvi connector@0: failed to find video source
- [ 3.858917] connector-hdmi connector@1: failed to find video source
- [ 3.864746] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
- [ 3.867004] Serial: AMBA driver
- [ 3.868133] omap_uart 4806a000.serial: no wakeirq for uart0
- [ 3.868286] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 226, base_baud = 3000000) is a OMAP UART0
- [ 3.868835] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 227, base_baud = 3000000) is a OMAP UART1
- [ 3.869323] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 228, base_baud = 3000000) is a OMAP UART2
- [ 5.590423] console [ttyO2] enabled
- [ 5.594635] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 229, base_baud = 3000000) is a OMAP UART3
- [ 5.605743] [drm] Initialized drm 1.1.0 20060810
- [ 5.610595] Error: Driver 'tfp410' is already registered, aborting...
- [ 5.620635] usbcore: registered new interface driver dln2
- [ 5.632263] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 5.639129] ehci-platform: EHCI generic platform driver
- [ 5.644897] ehci-omap: OMAP-EHCI Host Controller driver
- [ 5.670684] ehci-omap 4a064c00.ehci: EHCI Host Controller
- [ 5.676391] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
- [ 5.684631] ehci-omap 4a064c00.ehci: irq 336, io mem 0x4a064c00
- [ 5.700927] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
- [ 5.707366] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 5.714477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.722045] usb usb1: Product: EHCI Host Controller
- [ 5.727142] usb usb1: Manufacturer: Linux 4.4.0-rc6-armv7-x3 ehci_hcd
- [ 5.733917] usb usb1: SerialNumber: 4a064c00.ehci
- [ 5.739501] hub 1-0:1.0: USB hub found
- [ 5.743499] hub 1-0:1.0: 3 ports detected
- [ 5.748413] tegra-ehci: Tegra EHCI driver
- [ 5.753387] usbcore: registered new interface driver usb-storage
- [ 5.760101] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
- [ 5.766174] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
- [ 5.774566] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 5.781677] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.789245] usb usb2: Product: MUSB HDRC host driver
- [ 5.794433] usb usb2: Manufacturer: Linux 4.4.0-rc6-armv7-x3 musb-hcd
- [ 5.801177] usb usb2: SerialNumber: musb-hdrc.0.auto
- [ 5.807037] hub 2-0:1.0: USB hub found
- [ 5.811035] hub 2-0:1.0: 1 port detected
- [ 5.843933] using random self ethernet address
- [ 5.848602] using random host ethernet address
- [ 5.853881] usb0: HOST MAC a6:56:e4:9f:d9:ce
- [ 5.858398] usb0: MAC 32:52:a3:9d:a2:9e
- [ 5.862457] using random self ethernet address
- [ 5.867095] using random host ethernet address
- [ 5.871856] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
- [ 5.878753] g_ether gadget: g_ether ready
- [ 5.883422] mousedev: PS/2 mouse device common for all mice
- [ 5.892791] i2c /dev entries driver
- [ 5.902832] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
- [ 5.913299] sdhci: Secure Digital Host Controller Interface driver
- [ 5.919738] sdhci: Copyright(c) Pierre Ossman
- [ 5.981201] Synopsys Designware Multimedia Card Interface Driver
- [ 5.988250] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 5.995849] ledtrig-cpu: registered to indicate activity on CPUs
- [ 6.002593] hidraw: raw HID events driver (C) Jiri Kosina
- [ 6.008758] usbcore: registered new interface driver usbhid
- [ 6.014617] usbhid: USB HID core driver
- [ 6.018859] ashmem: initialized
- [ 6.025604] emif 4c000000.emif: emif_probe: device configured with addr = f08a2000 and IRQ247
- [ 6.034912] emif 4d000000.emif: emif_probe: device configured with addr = f08a4000 and IRQ248
- [ 6.045928] oprofile: using arm/armv7-ca9
- [ 6.050628] NET: Registered protocol family 10
- [ 6.056365] mip6: Mobile IPv6
- [ 6.059539] NET: Registered protocol family 17
- [ 6.064300] usb 1-1: new high-speed USB device number 2 using ehci-omap
- [ 6.071441] Key type dns_resolver registered
- [ 6.075958] mpls_gso: MPLS GSO support
- [ 6.080169] twl: not initialized
- [ 6.083618] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
- [ 6.092102] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
- [ 6.100616] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
- [ 6.109069] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
- [ 6.117553] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
- [ 6.126007] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
- [ 6.134490] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660
- [ 6.143005] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu
- [ 6.150268] omap2_set_init_voltage: unable to set vdd_mpu
- [ 6.156005] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
- [ 6.163391] omap2_set_init_voltage: unable to set vdd_core
- [ 6.169219] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
- [ 6.176483] omap2_set_init_voltage: unable to set vdd_iva
- [ 6.183868] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 699977 KHz
- [ 6.192016] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 700000 KHz
- [ 6.201477] Power Management for TI OMAP4+ devices.
- [ 6.206665] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
- [ 6.213897] ThumbEE CPU extension supported.
- [ 6.218505] Registering SWP/SWPB emulation handler
- [ 6.223632] SmartReflex Class3 initialized
- [ 6.228607] registered taskstats version 1
- [ 6.233245] zswap: loaded using pool lzo/zbud
- [ 6.238647] Btrfs loaded
- [ 6.242492] Key type encrypted registered
- [ 6.249267] dmm 4e000000.dmm: initialized all PAT entries
- [ 6.256683] Skipping twl internal clock init and using bootloader value (unknown osc rate)
- [ 6.269195] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 6.276367] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 6.281555] twl 0-0048: PIH (irq 340) nested IRQs
- [ 6.282501] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
- [ 6.283172] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
- [ 6.291778] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
- [ 6.303253] twl6030_usb 48070000.i2c:twl@48:usb-comparator: Initialized TWL6030 USB module
- [ 6.303253] twl6040 0-004b: clk32k is not handled
- [ 6.306457] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
- [ 6.307525] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
- [ 6.308471] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
- [ 6.309295] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
- [ 6.309387] tfp410 encoder@0: failed to find video source
- [ 6.310089] tpd12s015 encoder@1: failed to find video source
- [ 6.310089] connector-dvi connector@0: failed to find video source
- [ 6.311004] connector-hdmi connector@1: failed to find video source
- [ 6.374176] hub 1-1:1.0: USB hub found
- [ 6.378234] hub 1-1:1.0: 5 ports detected
- [ 6.496337] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 6.506774] mmc0: new high speed SDHC card at address 0007
- [ 6.512664] tfp410 encoder@0: failed to find video source
- [ 6.519317] tpd12s015 encoder@1: failed to find video source
- [ 6.525817] connector-dvi connector@0: failed to find video source
- [ 6.530609] mmcblk0: mmc0:0007 SD16G 14.4 GiB
- [ 6.537750] connector-hdmi connector@1: failed to find video source
- [ 6.544555] mmcblk0: p1
- [ 6.547271] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
- [ 6.557403] sr_init: No PMIC hook to init smartreflex
- [ 6.558135] tfp410 encoder@0: failed to find video source
- [ 6.558135] tpd12s015 encoder@1: failed to find video source
- [ 6.558135] connector-dvi connector@0: failed to find video source
- [ 6.558135] connector-hdmi connector@1: failed to find video source
- [ 6.587799] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range
- [ 6.587799] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- [ 6.588104] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- [ 6.588104] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
- [ 6.588104] of_cfs_init
- [ 6.588104] of_cfs_init: OK
- [ 6.597869] VDAC: disabling
- [ 6.598297] VANA: disabling
- [ 6.598724] VUSB: disabling
- [ 6.621185] tfp410 encoder@0: failed to find video source
- [ 6.621185] tpd12s015 encoder@1: failed to find video source
- [ 6.621185] connector-dvi connector@0: failed to find video source
- [ 6.623138] connector-hdmi connector@1: failed to find video source
- [ 6.663421] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem
- [ 6.671325] EXT4-fs (mmcblk0p1): write access will be enabled during recovery
- [ 6.685760] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 6.693145] mmc1: new SDIO card at address 0001
- [ 6.741394] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
- [ 6.871246] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 6.878540] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 6.889892] tfp410 encoder@0: failed to find video source
- [ 6.895629] tpd12s015 encoder@1: failed to find video source
- [ 6.902221] connector-dvi connector@0: failed to find video source
- [ 6.909729] connector-hdmi connector@1: failed to find video source
- [ 10.801971] EXT4-fs (mmcblk0p1): recovery complete
- [ 10.817108] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 10.825805] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
- [ 10.835906] devtmpfs: mounted
- [ 10.840026] Freeing unused kernel memory: 1036K (c0fdf000 - c10e2000)
- [ 11.028106] random: systemd urandom read with 26 bits of entropy available
- [ 11.039428] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
- [ 11.056732] systemd[1]: Detected architecture 'arm'.
- Welcome to Debian GNU/Linux 8 (jessie)!
- [ 11.123870] systemd[1]: Set hostname to <arm>.
- [ 11.425354] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- [ 11.443450] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 11.452026] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 11.460113] systemd[1]: Expecting device dev-ttyO2.device...
- Expecting device dev-ttyO2.device...
- [ 11.539154] systemd[1]: Starting Remote File Systems (Pre).
- [ OK ] Reached target Remote File Systems (Pre).
- [ 11.561035] systemd[1]: Reached target Remote File Systems (Pre).
- [ 11.567687] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
- [ 11.603393] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 11.613586] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- [ 11.622253] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 11.630798] systemd[1]: Starting Paths.
- [ OK ] Reached target Paths.
- [ 11.655395] systemd[1]: Reached target Paths.
- [ 11.660095] systemd[1]: Starting Encrypted Volumes.
- [ OK ] Reached target Encrypted Volumes.
- [ 11.693420] systemd[1]: Reached target Encrypted Volumes.
- [ 11.699279] systemd[1]: Starting Swap.
- [ OK ] Reached target Swap.
- [ 11.710998] systemd[1]: Reached target Swap.
- [ 11.711059] systemd[1]: Starting Root Slice.
- [ OK ] Created slice Root Slice.
- [ 11.741058] systemd[1]: Created slice Root Slice.
- [ 11.741058] systemd[1]: Starting User and Session Slice.
- [ OK ] Created slice User and Session Slice.
- [ 11.761779] systemd[1]: Created slice User and Session Slice.
- [ 11.761779] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ 11.806793] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 11.814331] systemd[1]: Starting Delayed Shutdown Socket.
- [ OK ] Listening on Delayed Shutdown Socket.
- [ 11.841003] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 11.847198] systemd[1]: Starting Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket (/dev/log).
- [ 11.882812] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 11.889251] systemd[1]: Starting udev Control Socket.
- [ OK ] Listening on udev Control Socket.
- [ 11.921051] systemd[1]: Listening on udev Control Socket.
- [ 11.921051] systemd[1]: Starting udev Kernel Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ 11.962341] systemd[1]: Listening on udev Kernel Socket.
- [ 11.968078] systemd[1]: Starting Journal Socket.
- [ OK ] Listening on Journal Socket.
- [ 11.988220] systemd[1]: Listening on Journal Socket.
- [ 11.993652] systemd[1]: Starting System Slice.
- [ OK ] Created slice System Slice.
- [ 12.020202] systemd[1]: Created slice System Slice.
- [ 12.021575] systemd[1]: Starting File System Check on Root Device...
- Starting File System Check on Root Device...
- [ 12.111358] systemd[1]: Starting system-getty.slice.
- [ OK ] Created slice system-getty.slice.
- [ 12.131164] systemd[1]: Created slice system-getty.slice.
- [ 12.137145] systemd[1]: Starting system-serial\x2dgetty.slice.
- [ OK ] Created slice system-serial\x2dg[ 12.144073] systemd[1]: Created slice system-serial\x2dgetty.slice.
- etty.slice.
- [ 12.155273] systemd[1]: Starting Increase datagram queue length...
- Starting Increase datagram queue length...
- [ 12.165649] systemd[1]: Mounting POSIX Message Queue File System...
- Mounting POSIX Message Queue File System...
- [ 12.177368] systemd[1]: Starting udev Coldplug all Devices...
- Starting udev Coldplug all Devices...
- [ 12.195495] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- Starting Create list of required static device nodes...rrent kernel...
- [ 12.249328] systemd[1]: Started Set Up Additional Binary Formats.
- [ 12.256042] systemd[1]: Mounting Debug File System...
- Mounting Debug File System...
- [ 12.291595] systemd[1]: Starting Load Kernel Modules...
- Starting Load Kernel Modules...
- [ 12.299865] systemd[1]: Mounted Huge Pages File System.
- [ 12.310424] systemd[1]: Starting Slices.
- [ OK ] Reached target Slices.
- [ 12.314788] systemd[1]: Reached target Slices.
- [ OK ] Mounted Debug File System.[ 12.326507] systemd[1]: Mounted Debug File System.
- [ OK ] Mounted POSIX Message Queue File[ 12.335845] systemd[1]: Mounted POSIX Message Queue File System.
- System.
- [ OK ] Started Increase datagram queue [ 12.348297] systemd[1]: Started Increase datagram queue length.
- length.
- [ OK ] Started Create list of required [ 12.363647] systemd[1]: Started Create list of required static device nodes for the current kernel.
- static device nodes ...current kernel.
- [ OK ] Started Load Kernel Modules.
- [ 12.405029] systemd[1]: Started Load Kernel Modules.
- [ OK ] Started udev Coldplug all Devic[ 12.433349] systemd[1]: Started udev Coldplug all Devices.
- es.
- [ OK ] Started File System Check on Root Device.
- [ 12.511077] systemd[1]: Started File System Check on Root Device.
- [ 12.632568] systemd[1]: Starting Remount Root and Kernel File Systems...
- Starting Remount Root and Kernel File Systems...
- [ 12.701385] systemd[1]: Starting Apply Kernel Variables...
- Starting Apply Kernel Variables...
- [ 12.733642] systemd[1]: Mounting FUSE Control File System...
- Mounting FUSE Control File System...
- [ 12.768829] systemd[1]: Mounting Configuration File System...
- Mounting Configuration File System...
- [ 12.793731] systemd[1]: Starting Create Static Device Nodes in /dev...
- Starting Create Static Device Nodes in /dev...
- [ 12.818695] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
- [ 12.851409] systemd[1]: Starting Syslog Socket.
- [ OK ] Listening on Syslog Socket.
- [ 12.871276] systemd[1]: Listening on Syslog Socket.
- [ 12.876556] systemd[1]: Starting Journal Service...
- Starting Journal Service...
- [ OK ] Started Journal Service.
- [ 12.910980] systemd[1]: Started Journal Service.
- [ OK ] Mounted Configuration File System.
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ 13.038907] systemd-fsck[120]: rootfs: clean, 27167/950272 files, 247701/3794688 blocks
- Starting udev Kernel Device Manager...
- Starting Load/Save Random Seed...
- [ 13.241516] systemd-udevd[185]: starting version 215
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- [ OK ] Reached target Remote File Systems.
- Starting Trigger Flushing of Journal to Persistent Storage...
- Starting Create Volatile Files and Directories...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Create Volatile Files and Directories.
- [ 13.569030] systemd-journald[174]: Received request to flush runtime journal from PID 1
- [ OK ] Started Trigger Flushing of Journal to Persistent Storage.
- Starting Network Time Synchronization...
- Starting Update UTMP about System Boot/Shutdown...
- Starting LSB: Raise network interfaces....
- Starting Copy rules generated while the root was ro...
- Starting LSB: Tune IDE hard disks...
- [ 13.802856] tfp410 encoder@0: failed to find video source
- [ 13.821899] tpd12s015 encoder@1: failed to find video source
- [ OK ] Started Network Time Synchronization.
- [ 13.851074] connector-dvi connector@0: failed to find video source
- [ 13.866882] connector-hdmi connector@1: failed to find video source
- [ OK ] Started Copy rules generated while the root was ro.
- [ 13.893981] tfp410 encoder@0: failed to find video source
- [ 13.900543] tpd12s015 encoder@1: failed to find video source
- [ 13.904357] connector-dvi connector@0: failed to find video source
- [ 13.904357] connector-hdmi connector@1: failed to find video source
- [ 13.927062] tfp410 encoder@0: failed to find video source
- [ 13.933654] omap-des 480a5000.des: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
- [ 13.942932] omap-des 480a5000.des: omap_des_probe: failed to get_sync(-19)
- [ 13.944061] omap-des 480a5000.des: initialization failed.
- [ OK ] Found device /dev/ttyO2.
- [ 13.957275] tpd12s015 encoder@1: failed to find video source
- [ 13.967102] connector-dvi connector@0: failed to find video source
- [ 13.984680] connector-hdmi connector@1: failed to find video source
- [ 13.995666] tfp410 encoder@0: failed to find video source
- [ 13.998199] tpd12s015 encoder@1: failed to find video source
- [ 14.024383] connector-dvi connector@0: failed to find video source
- [ 14.039184] connector-hdmi connector@1: failed to find video source
- [ OK ] Started LSB: Tune IDE hard disks[ 14.051696] tfp410 encoder@0: failed to find video source
- .
- [ 14.064208] tpd12s015 encoder@1: failed to find video source
- [ 14.074737] connector-dvi connector@0: failed to find video source
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ 14.164581] omap-aes 4b501000.aes: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
- [ 14.174377] omap-aes 4b501000.aes: omap_aes_probe: failed to get_sync(-19)
- [ 14.181701] omap-aes 4b501000.aes: initialization failed.
- [ 14.202301] omap4-keypad 4a31c000.keypad: number of keypad rows/columns not specified
- [ 14.202301] omap4-keypad: probe of 4a31c000.keypad failed with error -22
- [ OK ] Reached target System Time Synchronized.
- [ 14.283538] connector-hdmi connector@1: failed to find video source
- [ 14.303497] tfp410 encoder@0: failed to find video source
- [ 14.317718] omap-abe-twl6040 sound: twl6040-legacy <-> 40132000.mcpdm mapping ok
- [ 14.318328] tpd12s015 encoder@1: failed to find video source
- [ 14.318328] connector-dvi connector@0: failed to find video source
- [ 14.374389] connector-hdmi connector@1: failed to find video source
- [ 14.381225] tfp410 encoder@0: failed to find video source
- [ 14.388305] tpd12s015 encoder@1: failed to find video source
- [ 14.396942] connector-dvi connector@0: failed to find video source
- [ OK ] Reached target Sound Card.
- [ 14.610321] connector-hdmi connector@1: failed to find video source
- [ 14.618713] tfp410 encoder@0: failed to find video source
- [ 14.624877] tpd12s015 encoder@1: failed to find video source
- [ 14.631103] connector-dvi connector@0: failed to find video source
- [ 14.985443] connector-hdmi connector@1: failed to find video source
- [ 14.992340] wl12xx_driver wl12xx.1.auto: File path:/lib/firmware/updates/4.4.0-rc6-armv7-x3/ti-connectivity/wl1271-nvs.bin
- [ 14.993072] tfp410 encoder@0: failed to find video source
- [ 14.993072] tpd12s015 encoder@1: failed to find video source
- [ 14.993072] connector-dvi connector@0: failed to find video source
- [ 15.015960] wl12xx_driver wl12xx.1.auto: File is ERROR!
- [ 15.031097] wl12xx_driver wl12xx.1.auto: File path:/lib/firmware/updates/ti-connectivity/wl1271-nvs.bin
- [ 15.041137] wl12xx_driver wl12xx.1.auto: File is ERROR!
- [ 15.047637] wl12xx_driver wl12xx.1.auto: File path:/lib/firmware/4.4.0-rc6-armv7-x3/ti-connectivity/wl1271-nvs.bin
- [ 15.058746] wl12xx_driver wl12xx.1.auto: File is ERROR!
- [ 15.066040] wl12xx_driver wl12xx.1.auto: File path:/lib/firmware/ti-connectivity/wl1271-nvs.bin
- [ 15.075378] Ducati: Enter fw_read_file_contents.
- [ 15.081848] Ducati: Exit fw_read_file_contents successfully.
- [ 15.438934] smsc95xx v1.0.4
- [ OK ] Created slice system-systemd\x2drfkill.slice.
- [ 15.490417] wlcore: loaded
- Starting Load/Save RF Kill Switch Status of rfkill0...
- [ 15.518218] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 0e:63:3e:48:28:e7
- [ 15.532592] connector-hdmi connector@1: failed to find video source
- [ 15.533020] usbcore: registered new interface driver smsc95xx
- [ 15.546752] tfp410 encoder@0: failed to find video source
- [ 15.556671] tpd12s015 encoder@1: failed to find video source
- [ 15.567504] connector-dvi connector@0: failed to find video source
- [ OK ] Started Load/Save RF Kill Switch Status of rfkill0.
- [ 15.944366] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 15.951904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 17.478851] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 17.486602] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
- [ **] A start job is running for LSB: Raise network interf...14s / no limit)[ 25.599151] random: nonblocking pool is initialized
- [ OK ] Started LSB: Raise network interfaces..
- [ OK ] Reached target Network.
- [ OK ] Reached target Network is Online.
- [ OK ] Reached target System Initialization.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Timers.
- [ OK ] Reached target Basic System.
- Starting Cape Manager Service...
- Starting OpenBSD Secure Shell server...
- [ OK ] Started OpenBSD Secure Shell server.
- Starting Restore /etc/resolv.conf if the system cras...s shut down....
- Starting Regular background program processing daemon...
- [ OK ] Started Regular background program processing daemon.
- Starting Generic Board Startup...
- Starting /etc/rc.local Compatibility...
- Starting Login Service...
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- Starting LSB: Apache2 web server...
- Starting LSB: Start busybox udhcpd at boot time...
- Starting LSB: Advanced IEEE 802.11 management daemon...
- Starting Avahi mDNS/DNS-SD Stack...
- Starting D-Bus System Message Bus...
- [ OK ] Started D-Bus System Message Bus.
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- Starting System Logging Service...
- Starting Permit User Sessions...
- [ OK ] Started Cape Manager Service.
- [ OK ] Started Restore /etc/resolv.conf if the system crash...was shut down..
- [ OK ] Started Generic Board Startup.
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- [ OK ] Started LSB: Start busybox udhcpd at boot time.
- [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
- [ OK ] Started Permit User Sessions.
- [ OK ] Started System Logging Service.
- Starting LSB: set CPUFreq kernel parameters...
- Starting Getty on tty1...
- [ OK ] Started Getty on tty1.
- [ 28.013183] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
- [ 28.028961] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
- Starting Serial Getty on ttyO2...
- [ OK ] Started Serial Getty on ttyO2.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- [ OK ] Started Login Service.
- [ OK ] Started LSB: Apache2 web server.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Debian GNU/Linux 8 arm ttyO2
- default username:password is [debian:temppwd]
- The IP Address for eth0 is: 128.46.212.235
- arm login: root
- Password:
- Last login: Sun Jan 24 18:39:38 UTC 2016 on ttyO2
- Linux arm 4.4.0-rc6-armv7-x3 #188 SMP Wed Jan 20 14:57:09 EST 2016 armv7l
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- root@arm:~# ./load.sh
- ./load.sh: line 1: /sys/kernel/debug/remoteproc/remoteproc0/recovery: No such file or directory
- m3.out 100% 34KB 34.4KB/s 00:00
- [ 44.327545] remoteproc0: ipu is available
- [ 44.331939] remoteproc0: Note: remoteproc is still under development and considered experimental.
- [ 44.334533] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
- [ 44.352478] remoteproc0: File path:/lib/firmware/updates/4.4.0-rc6-armv7-x3/ducati-m3-core0.xem3
- [ 44.361877] remoteproc0: File is ERROR!
- [ 44.366729] connector-hdmi connector@1: failed to find video source
- [ 44.374359] remoteproc0: File path:/lib/firmware/updates/ducati-m3-core0.xem3
- [ 44.382049] remoteproc0: File is ERROR!
- [ 44.383331] tfp410 encoder@0: failed to find video source
- [ 44.383331] tpd12s015 encoder@1: failed to find video source
- [ 44.384246] connector-dvi connector@0: failed to find video source
- [ 44.404449] remoteproc0: File path:/lib/firmware/4.4.0-rc6-armv7-x3/ducati-m3-core0.xem3
- [ 44.413146] remoteproc0: File is ERROR!
- [ 44.416625] remoteproc0: File path:/lib/firmware/ducati-m3-core0.xem3
- [ 44.424255] Ducati: Enter fw_read_file_contents.
- [ 44.429260] Ducati: Exit fw_read_file_contents successfully.
- [ 44.435272] Ducati: Enetering rproc_fw_config_virtio.
- [ 44.435852] Ducati: find_rsc_table: rproc_elf_find_rsc_table+0x0/0x48
- [ 44.447509] Ducati: Table size is 308
- [ 44.448059] Ducati: header(resource) type is 0
- [ 44.456115] Ducati: handler is null.
- [ 44.456665] Ducati: header(resource) type is 0
- [ 44.464599] Ducati: handler is null.
- [ 44.465148] Ducati: header(resource) type is 1
- [ 44.473083] Ducati: handler is null.
- [ 44.476867] Ducati: header(resource) type is 2
- [ 44.481567] Ducati: handler is null.
- [ 44.484985] Ducati: header(resource) type is 0
- [ 44.490051] Ducati: handler is null.
- [ 44.493835] Ducati: header(resource) type is 0
- [ 44.494567] Ducati: handler is null.
- [ 44.502319] Ducati: header(resource) type is 0
- [ 44.502899] Ducati: handler is null.
- [ 44.507049] Ducati: header(resource) type is 1
- [ 44.515533] Ducati: handler is null.
- [ 44.517608] Ducati: header(resource) type is 2
- [ 44.524017] Ducati: handler is null.
- [ 44.524536] Ducati: header(resource) type is 0
- [ 44.524536] Ducati: handler is null.
- [ 44.532501] Ducati: Complete all the firmware loading.
- [ 47.396789] Booting processor
- [ 47.396789] Ducati: The names are: ipu
- [ 47.396789] Ducati: The names are: ipu
- [ 47.404479] Ducati: The names are: ipu
- [ 47.412445] Ducati: The names are: ipu
- [ 47.416412] Ducati: The names are: ipu
- [ 47.416412] Ducati: The names are: ipu
- [ 47.416412] Ducati: The names are: ipu
- [ 47.416412] Ducati: The names are: ipu
- [ 47.432281] Ducati: The names are: ipu
- [ 47.433380] Ducati: The names are: ipu
- [ 47.433380] Ducati: Starting boot the revice.
- [ 47.444854] remoteproc0: powering up ipu
- [ 47.449096] Ducati: powering up ipu
- [ 47.449096] remoteproc0: File path:/lib/firmware/updates/4.4.0-rc6-armv7-x3/ducati-m3-core0.xem3
- [ 47.449096] remoteproc0: File is ERROR!
- [ 47.466369] remoteproc0: File path:/lib/firmware/updates/ducati-m3-core0.xem3
- [ 47.467315] remoteproc0: File is ERROR!
- [ 47.478210] remoteproc0: File path:/lib/firmware/4.4.0-rc6-armv7-x3/ducati-m3-core0.xem3
- [ 47.486877] remoteproc0: File is ERROR!
- [ 47.487091] remoteproc0: File path:/lib/firmware/ducati-m3-core0.xem3
- [ 47.497955] Ducati: Enter fw_read_file_contents.
- [ 47.502899] Ducati: Exit fw_read_file_contents successfully.
- [ 47.502899] remoteproc0: Enter booting.
- [ 47.513122] remoteproc0: Booting fw image ducati-m3-core0.xem3, size 35171
- [ 47.520507] Ducati: page table allocated start virtual address: cddd4000
- [ 47.527618] Ducati: page table allocated start physical address: 8ddd4000
- [ 47.534820] Ducati: Dev name: 4a066000.mmu, Data name: 55082000.mmu
- [ 47.541473] Ducati: Dev name: 55082000.mmu, Data name: 55082000.mmu
- [ 47.548126] Ducati: page table d 0
- [ 47.548980] Ducati: The name of the hardreset is mmu_cache
- [ 47.557525] Ducati: All the reset line names are mmu_cache and looking for mmu_cache
- [ 47.565734] Ducati: Deassert function _omap4_deassert_hardreset+0x0/0x90
- [ 47.572845] Ducati: Deassert functiom in prm omap4_prminst_deassert_hardreset+0x0/0xe8
- [ 47.581237] Ducati: starts to disable module in hardreset for mmu_ipu
- [ 47.584472] Ducati: the name of reset line:mmu_cache
- [ 47.584472] Ducati: All the reset line names are mmu_cache and looking for mmu_cache
- [ 47.597290] Ducati: finishes to disable module in hardreset for mmu_ipu
- [ 47.608459] Ducati: omap_hwmod successfully deassert hardreset 0.
- [ 47.614898] Ducati: start clkdm_hwmod_disable.
- [ 47.615722] Ducati: finish clkdm_hwmod_disable.
- [ 47.624420] Ducati: the name of reset line:mmu_cache
- [ 47.627502] Ducati: All the reset line names are mmu_cache and looking for mmu_cache
- [ 47.637908] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1
- [ 47.644104] Ducati: the version register base is 0xf0886000
- [ 47.649993] Ducati: start physical address 8ddd4000
- [ 47.655151] Ducati: start VIRTUAL address 0xcddd4000
- [ 47.655426] omap-iommu 55082000.mmu: 55082000.mmu: MMU_TTB 0x8ddd4000
- [ 47.667236] omap-iommu 55082000.mmu: 55082000.mmu: MMU_FAULT_AD at the beginning 0x0
- [ 47.675445] Ducati: find_rsc_table: rproc_elf_find_rsc_table+0x0/0x48
- [ 47.682312] Ducati: header(resource) type is 0
- [ 47.684600] Ducati: the offset of each entry is 40
- [ 47.692077] remoteproc0: carveout rsc: da 6000000, pa 0, len c000000, flags 0
- [ 48.131011] remoteproc0: carveout va d0000000, dma 90000000, len 0xc000000
- [ 48.141510] remoteproc0: carveout mapped 0x6000000 to 0x90000000
- [ 48.147949] Ducati: header(resource) type is 0
- [ 48.152679] Ducati: the offset of each entry is 96
- [ 48.157745] remoteproc0: carveout rsc: da 5c00000, pa 0, len 400000, flags 0
- [ 48.171112] remoteproc0: carveout va dc000000, dma 9c000000, len 0x400000
- [ 48.183105] remoteproc0: carveout mapped 0x5c00000 to 0x9c000000
- [ 48.185943] Ducati: header(resource) type is 1
- [ 48.194335] Ducati: the offset of each entry is 152
- [ 48.195739] Ducati: header(resource) type is 2
- [ 48.204193] Ducati: the offset of each entry is 208
- [ 48.206054] Ducati: carveout address 0x6000000 and offset 0xfff80000
- [ 48.216094] Ducati: carveout address 0x5c00000 and offset 0x380000
- [ 48.222686] Ducati: header(resource) type is 0
- [ 48.225128] Ducati: the offset of each entry is 256
- [ 48.230895] remoteproc0: carveout rsc: da 0, pa 0, len 100000, flags 0
- [ 48.242980] remoteproc0: carveout va dc400000, dma 9c400000, len 0x100000
- [ 48.242980] remoteproc0: carveout mapped 0x0 to 0x9c400000
- [ 48.256164] remoteproc0: phdr: type 1 da 0x0 memsz 0x82e4 filesz 0x2e4
- [ 48.257171] Ducati: carveout address 0x6000000 and offset 0xfa000000
- [ 48.269897] Ducati: carveout address 0x5c00000 and offset 0xfa400000
- [ 48.270599] Ducati: carveout address 0x0 and offset 0x0
- [ 48.282165] Ducati: carveout address 0x6000000 and offset 0xfa000144
- [ 48.288909] Ducati: carveout address 0x5c00000 and offset 0xfa400144
- [ 48.289947] Ducati: carveout address 0x0 and offset 0x144
- [ 48.301330] Ducati: mailbox name: mbox_ipu
- [ 48.305755] Ducati: the device_enable function is: omap_rproc_device_enable+0x0/0x150
- [ 48.314056] Ducati: the name of reset line:cpu0
- [ 48.314453] Ducati: All the reset line names are cpu0 and looking for cpu0
- [ 48.326110] Ducati: the name of reset line:cpu1
- [ 48.330902] Ducati: All the reset line names are cpu0 and looking for cpu1
- [ 48.338165] Ducati: All the reset line names are cpu1 and looking for cpu1
- [ 48.345428] Ducati: platform device name omap-rproc.1 has been enabled.
- [ 48.345428]
- [ 48.345428]
- [ 48.345428]
- [ 48.345428]
- [ 48.345428]
- [ 48.345428]
- [ 48.345428]
- [ 48.347900] Ducati: Hardware reset function for ipu is called.
- [ 48.369567] Ducati: Start omap_device_deassert_hardreset for cpu0.
- [ 48.370269] Ducati: The name of the hardreset is cpu0
- [ 48.381469] Ducati: All the reset line names are cpu0 and looking for cpu0
- [ 48.382141] Ducati: Deassert function _omap4_deassert_hardreset+0x0/0x90
- [ 48.382141] Ducati: Deassert functiom in prm omap4_prminst_deassert_hardreset+0x0/0xe8
- [ 48.382141] Ducati: starts to disable module in hardreset for ipu
- [ 48.404205] Ducati: ==========================================
- [ 48.404205] iommu_report_fault: TRANSLATION FAULT (in L2 pgtable)
- [ 48.404205] omap-iommu 55082000.mmu: 55082000.mmu: MMU_TTB 0x8ddd4000
- [ 48.404205] omap-iommu 55082000.mmu: 55082000.mmu: MMU_RAM 0x0
- [ 48.404235] fault virtual addr 0x00000000 pc 0 faultstatus 00000000 (MMUFault Fetch R)
- [ 48.404235] Ducati: ==========================================
- [ 48.404235] omap-iommu 55082000.mmu: iommu fault: da 0x0 flags 0x0
- [ 48.404235] remoteproc0: crash detected in ipu: type mmufault
- [ 48.404266] Ducati: the name of reset line:mmu_cache
- [ 48.404266] Ducati: All the reset line names are mmu_cache and looking for mmu_cache
- [ 48.404266] Ducati: the name of reset line:mmu_cache
- [ 48.404266] Ducati: All the reset line names are mmu_cache and looking for mmu_cache
- [ 48.410888] omap_hwmod: mmu_ipu: _wait_target_disable failed
- [ 48.410888] Ducati: All the reset line names are mmu_cache and looking for mmu_cache
- [ 48.410888] Ducati: Hardware reset ASSERT has been called.
- [ 48.410919] omap-iommu 55082000.mmu: 55082000.mmu: errs:0x00000002 da:0x00000000 pgd:0xcddd4000 *pgd:0x9c400002
- [ 48.520751] Ducati: the name of reset line:cpu0
- [ 48.521026] Ducati: All the reset line names are cpu0 and looking for cpu0
- [ 48.532775] Ducati: the name of reset line:cpu1
- [ 48.532775] Ducati: All the reset line names are cpu0 and looking for cpu1
- [ 48.532775] Ducati: All the reset line names are cpu1 and looking for cpu1
- [ 48.547149] Ducati: integration code is still doing something.
- [ 48.552093] Ducati: finishes to disable module in hardreset for ipu
- [ 48.564849] Ducati: omap_hwmod successfully deassert hardreset 0.
- [ 48.564849] Ducati: start clkdm_hwmod_disable.
- [ 48.564849] Ducati: finish clkdm_hwmod_disable.
- [ 48.580810] Ducati: Start omap_device_deassert_hardreset for cpu1.
- [ 48.587341] Ducati: The name of the hardreset is cpu1
- [ 48.592712] Ducati: All the reset line names are cpu0 and looking for cpu1
- [ 48.599975] Ducati: All the reset line names are cpu1 and looking for cpu1
- [ 48.607238] Ducati: Deassert function _omap4_deassert_hardreset+0x0/0x90
- [ 48.611755] Ducati: Deassert functiom in prm omap4_prminst_deassert_hardreset+0x0/0xe8
- [ 48.620880] Ducati: starts to disable module in hardreset for ipu
- [ 48.629119] Ducati: the name of reset line:cpu0
- [ 48.630889] Ducati: All the reset line names are cpu0 and looking for cpu0
- [ 48.633911] Ducati: the name of reset line:cpu1
- [ 48.633911] Ducati: All the reset line names are cpu0 and looking for cpu1
- [ 48.647918] Ducati: All the reset line names are cpu1 and looking for cpu1
- [ 48.660888] omap_hwmod: ipu: _wait_target_disable failed
- [ 48.672668] Ducati: finishes to disable module in hardreset for ipu
- [ 48.679290] Ducati: omap_hwmod successfully deassert hardreset 0.
- [ 48.685729] Ducati: start clkdm_hwmod_disable.
- [ 48.690429] Ducati: finish clkdm_hwmod_disable.
- [ 48.695220] Ducati: Finish omap_device_deassert_hardreset for cpu1.
- [ 48.701873] remoteproc0: remote processor ipu is now up
- [ 48.707672] remoteproc0: handling crash #1 in ipu
- [ 48.708740] remoteproc0: Don't actually do recovery but only set the state to be in recovery.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement