COMMAND: Dusty Version
OUTPUT:
0.7.0

COMMAND: Dusty Binary
OUTPUT:
True

COMMAND: Daemon Warnings
OUTPUT:


COMMAND: which rsync
OUTPUT:
/usr/bin/rsync

COMMAND: VBoxManage -v
OUTPUT:
5.0.16r105871

COMMAND: docker-machine version
OUTPUT:
docker-machine version 0.6.0, build e27fb87

COMMAND: docker-machine ssh dusty df -h /dev/sda1
OUTPUT:
Filesystem                Size      Used Available Use% Mounted on
/dev/sda1                18.2G    811.3M     16.4G   5% /mnt/sda1

COMMAND: docker -v
OUTPUT:
Docker version 1.10.3, build 20f81dd

COMMAND: docker-compose --version
OUTPUT:
docker-compose version 1.6.2, build 4d72027

COMMAND: cat /etc/hosts
OUTPUT:
##
# Host Database
#
# localhost is used to configure the loopback interface
# when the system is booting.  Do not change this entry.
##
127.0.0.1	localhost
255.255.255.255	broadcasthost
::1             localhost
# BEGIN section for Dusty
192.168.99.100 api.local
# END section for Dusty

COMMAND: cat /etc/dusty/config.yml
OUTPUT:
bundles:
- app
dusty_env_overrides: {}
mac_username: morgan
setup_has_run: true
specs_repo: /Users/morgan/dusty-specs
vm_memory_size: '6144'

COMMAND: VBoxManage showvminfo dusty
OUTPUT:
Name:            dusty
Groups:          /
Guest OS:        Linux 2.6 / 3.x / 4.x (64-bit)
UUID:            ec17615b-882b-4aec-909e-8a58df02a8c8
Config file:     /Users/morgan/.docker/machine/machines/dusty/dusty/dusty.vbox
Snapshot folder: /Users/morgan/.docker/machine/machines/dusty/dusty/Snapshots
Log folder:      /Users/morgan/.docker/machine/machines/dusty/dusty/Logs
Hardware UUID:   ec17615b-882b-4aec-909e-8a58df02a8c8
Memory size:     6144MB
Page Fusion:     off
VRAM size:       8MB
CPU exec cap:    100%
HPET:            on
Chipset:         piix3
Firmware:        BIOS
Number of CPUs:  8
PAE:             on
Long Mode:       on
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode:  disabled
Boot Device (1): DVD
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI:            on
IOAPIC:          on
Time offset:     0ms
RTC:             UTC
Hardw. virt.ext: on
Nested Paging:   on
Large Pages:     on
VT-x VPID:       on
VT-x unr. exec.: on
Paravirt. Provider: Default
State:           running (since 2016-03-14T00:47:21.940000000)
Monitor count:   1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0):            SATA
Storage Controller Type (0):            IntelAhci
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0):  30
Storage Controller Port Count (0):      30
Storage Controller Bootable (0):        on
SATA (0, 0): /Users/morgan/.docker/machine/machines/dusty/boot2docker.iso (UUID: 3f779f05-c71b-46b5-9dbf-121064e6e835)
SATA (1, 0): /Users/morgan/.docker/machine/machines/dusty/disk.vmdk (UUID: 9d9c4704-2a7b-4921-8602-789ce3522ad0)
NIC 1:           MAC: 080027B6B70A, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: Am79C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings:  MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 1 Rule(0):   name = ssh, protocol = tcp, host ip = 127.0.0.1, host port = 53403, guest ip = , guest port = 22
NIC 2:           MAC: 0800272DFD3E, Attachment: Host-only Interface 'vboxnet3', Cable connected: on, Trace: off (file: none), Type: Am79C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 3:           disabled
NIC 4:           disabled
NIC 5:           disabled
NIC 6:           disabled
NIC 7:           disabled
NIC 8:           disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1:          disabled
UART 2:          disabled
UART 3:          disabled
UART 4:          disabled
LPT 1:           disabled
LPT 2:           disabled
Audio:           disabled
Clipboard Mode:  disabled
Drag and drop Mode: disabled
Session name:    headless
Video mode:      720x400x0 at 0,0 enabled
VRDE:            disabled
USB:             disabled
EHCI:            disabled
XHCI:            disabled

USB Device Filters:

<none>

Available remote USB devices:

<none>

Currently Attached USB Devices:

<none>

Bandwidth groups:  <none>

Shared folders:

Name: 'Users', Host path: '/Users' (machine mapping), writable

VRDE Connection:    not active
Clients so far:     0

Video capturing:    not active
Capture screens:    0
Capture file:       /Users/morgan/.docker/machine/machines/dusty/dusty/dusty.webm
Capture dimensions: 1024x768
Capture rate:       512 kbps
Capture FPS:        25

Guest:

Configured memory balloon size:      0 MB
OS type:                             Linux26_64
Additions run level:                 2
Additions version:                   5.0.16 r105871


Guest Facilities:

Facility "VirtualBox Base Driver": active/running (last update: 2016/03/14 00:47:38 UTC)
Facility "VirtualBox System Service": active/running (last update: 2016/03/14 00:47:46 UTC)
Facility "Seamless Mode": not active (last update: 2016/03/14 00:47:38 UTC)
Facility "Graphics Mode": not active (last update: 2016/03/14 00:47:38 UTC)

COMMAND: ssh-add -l
OUTPUT:
4096 SHA256:nL4kdGyhggWy70egqGqNCIWQB7N7SPTL0hMbFV50aD8 ./.ssh/id_rsa (RSA)