Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-gentoo] (local build)
- Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi/HGST Travelstar Z7K500
- Device Model: HGST HTS725050A7E630
- Serial Number: TF755AWHJ9XB2M
- LU WWN Device Id: 5 000cca 77fe0b0cc
- Firmware Version: GH2ZB550
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Oct 29 10:24:30 2018 GMT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x05) Offline data collection activity
- was aborted by an interrupting command from host.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 45) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 92) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0007 223 223 033 Pre-fail Always - 1
- 4 Start_Stop_Count 0x0012 074 074 000 Old_age Always - 41176
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0012 081 081 000 Old_age Always - 8393
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 5032
- 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 125
- 193 Load_Cycle_Count 0x0012 065 065 000 Old_age Always - 357267
- 194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 10/52)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 6
- 197 Current_Pending_Sector 0x0022 073 073 000 Old_age Always - 840
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 12
- 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 466 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 466 occurred at disk power-on lifetime: 8391 hours (349 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 e8 b3 08 07 Error: WP at LBA = 0x0708b3e8 = 118010856
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 a8 de 72 74 40 00 02:16:01.918 WRITE FPDMA QUEUED
- 60 08 a0 e8 b3 08 40 00 02:16:01.918 READ FPDMA QUEUED
- 61 08 98 58 50 90 40 00 02:16:01.918 WRITE FPDMA QUEUED
- 61 08 90 9e 81 51 40 00 02:16:01.918 WRITE FPDMA QUEUED
- 61 08 88 0e f1 50 40 00 02:16:01.918 WRITE FPDMA QUEUED
- Error 465 occurred at disk power-on lifetime: 8391 hours (349 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 e8 b3 08 07 Error: UNC at LBA = 0x0708b3e8 = 118010856
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 d0 3e 76 21 40 00 02:16:00.644 READ FPDMA QUEUED
- 60 00 c0 de 06 24 40 00 02:16:00.644 READ FPDMA QUEUED
- 61 08 b8 0e 10 10 40 00 02:16:00.644 WRITE FPDMA QUEUED
- 61 08 b0 be 20 10 40 00 02:16:00.644 WRITE FPDMA QUEUED
- 61 08 a8 16 10 10 40 00 02:16:00.644 WRITE FPDMA QUEUED
- Error 464 occurred at disk power-on lifetime: 8391 hours (349 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 e0 b3 08 07 Error: UNC at LBA = 0x0708b3e0 = 118010848
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 38 b8 a6 8d 20 40 00 02:15:55.915 READ FPDMA QUEUED
- 61 b0 b0 1e a2 54 40 00 02:15:55.915 WRITE FPDMA QUEUED
- 61 08 a8 96 f4 9e 40 00 02:15:55.915 WRITE FPDMA QUEUED
- 60 08 40 e0 b3 08 40 00 02:15:55.340 READ FPDMA QUEUED
- ea 00 00 00 00 00 a0 00 02:15:55.340 FLUSH CACHE EXT
- Error 463 occurred at disk power-on lifetime: 8391 hours (349 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 e0 b3 08 07 Error: WP at LBA = 0x0708b3e0 = 118010848
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 08 66 58 74 40 00 02:15:52.419 WRITE FPDMA QUEUED
- 60 08 00 e0 b3 08 40 00 02:15:52.419 READ FPDMA QUEUED
- 61 08 f8 b6 72 74 40 00 02:15:52.419 WRITE FPDMA QUEUED
- ea 00 00 00 00 00 a0 00 02:15:52.419 FLUSH CACHE EXT
- ea 00 00 00 00 00 a0 00 02:15:52.343 FLUSH CACHE EXT
- Error 462 occurred at disk power-on lifetime: 8391 hours (349 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 e0 b3 08 07 Error: WP at LBA = 0x0708b3e0 = 118010848
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 b0 16 a2 54 40 00 02:15:49.405 WRITE FPDMA QUEUED
- 60 08 a0 e0 b3 08 40 00 02:15:49.405 READ FPDMA QUEUED
- ea 00 00 00 00 00 a0 00 02:15:49.405 FLUSH CACHE EXT
- ea 00 00 00 00 00 a0 00 02:15:49.405 FLUSH CACHE EXT
- ef 10 02 00 00 00 a0 00 02:15:49.405 SET FEATURES [Enable SATA feature]
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Interrupted (host reset) 90% 8391 -
- # 2 Short offline Completed without error 00% 8198 -
- # 3 Extended offline Completed without error 00% 7473 -
- # 4 Extended offline Completed without error 00% 961 -
- # 5 Short captive Completed without error 00% 959 -
- # 6 Short offline Aborted by host 90% 959 -
- # 7 Short offline Completed without error 00% 958 -
- # 8 Extended offline Interrupted (host reset) 50% 958 -
- # 9 Vendor (0x50) Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement