VIM3 Crash

---------- 2020-08-20 19:10:03 +0800: Logging Started ----------

G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.!,Kх}с0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02

L0:00000000
L1:20000703
L2:00008067
L3:14000000
B2:00402000
B1:e0f83180

TE: 326531

BL2 Built : 19:22:01, Jul 31 2019. g12b ge9a9000 - zhiguang.ouyang@droid07-sz

Board ID = 8
Set A53 clk to 24M
Set A73 clk to 24M
Set clk81 to 24M
A53 clk: 1200 MHz
A73 clk: 1200 MHz
CLK81: 166.6M
smccc: 0005456e
eMMC boot @ 0
sw8 s
DDR driver_vesion: LPDDR4_PHY_V_0_1_18 build time: Jul 31 2019 19:21:56
board id: 8
Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
fw parse done
Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
PIEI prepare done
fastboot data load
00000000
emmc switch 1 ok
ddr saved addr:00016000
Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
00000000
emmc switch 0 ok
fastboot data verify
verify result: 265
Cfg max: 4, cur: 1. Board id: 255. Force loop cfg
LPDDR4 probe
ddr clk to 1608MHz
Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0

dmc_version 0001
Check phy result
INFO : End of CA training
INFO : End of initialization
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : End of Write leveling coarse delay
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of read dq deskew training
INFO : End of MPR read delay center optimization
INFO : End of write delay center optimization
INFO : End of read delay center optimization
INFO : End of max read latency training
INFO : Training has run successfully!
1D training succeed
Load ddrfw from eMMC, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : Training has run successfully!

channel==0
RxClkDly_Margin_A0==97 ps 10
TxDqDly_Margin_A0==106 ps 11
RxClkDly_Margin_A1==87 ps 9
TxDqDly_Margin_A1==106 ps 11
TrainedVREFDQ_A0==25
TrainedVREFDQ_A1==26
VrefDac_Margin_A0==27
DeviceVref_Margin_A0==25
VrefDac_Margin_A1==27
DeviceVref_Margin_A1==26


channel==1
RxClkDly_Margin_A0==87 ps 9
TxDqDly_Margin_A0==106 ps 11
RxClkDly_Margin_A1==97 ps 10
TxDqDly_Margin_A1==97 ps 10
TrainedVREFDQ_A0==24
TrainedVREFDQ_A1==25
VrefDac_Margin_A0==26
DeviceVref_Margin_A0==24
VrefDac_Margin_A1==27
DeviceVref_Margin_A1==24

 dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004

soc_vref_reg_value 0x 00000027 00000028 00000028 00000026 00000026 00000026 00000025 00000029 00000028 00000028 00000027 00000024 00000025 00000028 00000025 00000025 00000025 00000026 00000027 00000026 00000026 00000026 00000026 00000027 00000027 00000024 00000025 00000027 00000027 00000025 00000026 00000027 dram_vref_reg_value 0x 00000014
2D training succeed
aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_18 build time: Jul 31 2019 19:22:05
auto size-- 65535DDR cs0 size: 2048MB
DDR cs1 size: 2048MB
DMC_DDR_CTRL: 00e00024DDR size: 3928MB
cs0 DataBus test pass
cs1 DataBus test pass
cs0 AddrBus test pass
cs1 AddrBus test pass

100bdlr_step_size ps== 444
result report
boot times 0Enable ddr reg access
00000000
emmc switch 3 ok
Authentication key not yet programmed
get rpmb counter error 0x00000007
00000000
emmc switch 0 ok
Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x000d7a00, part: 0
0.0;M3 CHK:0;cm4_sp_mode 0
MVN_1=0x00000000
MVN_2=0x00000000
[Image: g12b_v1.1.3389-92241b5 2019-07-02 17:23:01 luan.yuan@droid15-sz]
OPS=0x10
ring efuse init
chipver efuse init
29 0b 10 00 01 10 06 00 00 03 37 30 4e 42 4e 50
[0.018959 Inits done]
secure task start!
high task start!
low task start!
run into bl31
NOTICE:  BL31: v1.3(release):4fc40b1
NOTICE:  BL31: Built : 15:58:17, May 22 2019
NOTICE:  BL31: G12A normal boot!
NOTICE:  BL31: BL33 decompress pass
ERROR:   Error initializing runtime service opteed_fast


U-Boot 2015.01-g854edde-dirty (Nov 01 2019 - 17:36:54)

DRAM:  3.8 GiB
Relocation Offset is: d6e2c000
spi_post_bind(spifc): req_seq = 0
register usb cfg[0][1] = 00000000d7f2e888
aml_i2c_init_port init regs for 0
NAND:  get_sys_clk_rate_mtd() 290, clock setting 200!
NAND device id: 0 9f ff ff ff ff
No NAND device found!!!
nand init failed: -6
get_sys_clk_rate_mtd() 290, clock setting 200!
NAND device id: 0 9f ff ff ff ff
No NAND device found!!!
nand init failed: -6
MMC:   aml_priv->desc_buf = 0x00000000d3e1ca70
aml_priv->desc_buf = 0x00000000d3e1edb0
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, status=0x3ff2800
emmc/sd response timeout, cmd55, status=0x3ff2800
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x1, tx-dly 0, clock 40000000
aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x2000
[mmc_startup] mmc refix success
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
start dts,buffer=00000000d3e21620,dt_addr=00000000d3e21620
get_partition_from_dts() 91: ret 0
parts: 17
00:      logo   0000000000800000 1
01:  recovery   0000000001800000 1
02:      misc   0000000000800000 1
03:      dtbo   0000000000800000 1
04:  cri_data   0000000000800000 2
05:     param   0000000001000000 2
06:      boot   0000000001000000 1
set has_boot_slot = 0
07:       rsv   0000000001000000 1
08:  metadata   0000000001000000 1
09:    vbmeta   0000000000200000 1
10:       tee   0000000002000000 1
11:    vendor   0000000014000000 1
12:       odm   0000000008000000 1
13:    system   0000000050000000 1
14:   product   0000000008000000 1
15:     cache   0000000046000000 2
16:      data   ffffffffffffffff 4
init_part() 297: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
mmc env offset: 0x4d400000
In:    serial
Out:   serial
Err:   serial
reboot_mode=cold_boot
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-3406: calc f0b8bbc7, store f0b8bbc7
_verify_dtb_checksum()-3406: calc f0b8bbc7, store f0b8bbc7
dtb_read()-3623: total valid 2
update_old_dtb()-3604: do nothing
aml_i2c_init_port init regs for 0
fusb302_init: Device ID: 0x91
CC connected in 0 as UFP
fusb302 detect chip.port_num = 0
amlkey_init() enter!
[EFUSE_MSG]keynum is 1
vpu: clk_level in dts: 7
vpu: vpu_power_on
vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
vpu: vpu_module_init_config
vpp: vpp_init
vpp: vpp osd2 matrix rgb2yuv..............
cvbs: cpuid:0x29
lcd: detect mode: tablet, key_valid: 0
lcd: load config from dts
lcd: pinctrl_version: 2
lcd: use panel_type=lcd_1
lcd: bl: pinctrl_version: 2
lcd: bl: name: backlight_pwm, method: 1
lcd: bl: aml_bl_power_ctrl: 0
Net:   dwmac.ff3f0000amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 1
MACADDR:02:00:00:06:10:01(from chipid)

CONFIG_AVB2: null
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0

wipe_data=successful
wipe_cache=successful
upgrade_step=0
reboot_mode:::: cold_boot


lcd: error: outputmode[1080p60hz] is not support
hpd_state=1
edid preferred_mode is 1080p60hz[16]
hdr mode is 0
dv  mode is ver:0  len: 0
hdr10+ mode is 0
[OSD]load fb addr from dts:/meson-fb
[OSD]set initrd_high: 0x7f800000
[OSD]fb_addr for logo: 0x7f800000
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0x7f800000
[OSD]VPP_OFIFO_SIZE:0xfff01fff
[CANVAS]canvas init
[CANVAS]addr=0x7f800000 width=3840, height=2160
[OSD]osd_hw.free_dst_data: 0,1919,0,1079
[OSD]osd1_update_disp_freescale_enable
cvbs: outputmode[1080p60hz] is invalid
vpp: vpp_matrix_update: 2
set hdmitx VIC = 16
config HPLL = 4455000 frac_rate = 1
HPLL: 0x3b0004b9
HPLL: 0x1b0004b9
HPLL: 0xdb0004b9
config HPLL done
j = 6  vid_clk_div = 1
hdmitx: set enc for VIC: 16
hdmitx phy setting done
enc_vpu_bridge_reset[1249]
rx version is 1.4 or below  div=10
vpp: sdr_mode = 2
vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
normal power on
boot wol: disable
saradc: 0x288, hw_ver: 0x32 (VIM3.V12)


gpio: pin GPIOAO_7 (gpio 7) value is 1
port mode is usb3.0
Command: bcb uboot-command
Start read misc partition datas!
BCB hasn't any datas,exit!


Hit Enter or space or Ctrl+C key to stop autoboot -- :  0
pll tsensor avg: 0x20ae, u_efuse: 0x800b
temp1: 44
ddr tsensor avg: 0x20dc, u_efuse: 0x8002
temp2: 45
device cool done
CONFIG_SYSTEM_AS_ROOT: systemroot
system_mode: 1
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
CONFIG_AVB2: null
active_slot: normal
avb2: 0
ee_gate_off ...
avb2: 0
## Booting Android Image at 0x01080000 ...
Kernel command line: androidboot.dtbo_idx=0 --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
active_slot is normal
load dtb from 0x1000000 ......
find 1 dtbos
dtbos to be applied: 0
Apply dtbo 0
   Loading Kernel Image(COMP_NONE) ... OK
   kernel loaded at 0x01080000, end = 0x019b1f80
   Loading Device Tree to 0000000009fe6000, end 0000000009fff45b ... OK

Starting kernel ...

uboot time: 3710897 us
[    0.000000@0] Booting Linux on physical CPU 0x0
[    0.000000@0] Linux version 4.9.113-g6574113-dirty (terry@Server) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #4 SMP PREEMPT Fri Nov 1 14:42:39 CST 2019
[    0.000000@0] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000@0] CPU: div instructions available: patching division code
[    0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000@0] OF: fdt:Machine model: Khadas
[    0.000000@0] earlycon: aml-uart0 at MMIO 0xff803000 (options '')
[    0.000000@0] bootconsole [aml-uart0] enabled
[    0.000000@0] Reserved memory: created CMA memory pool at 0x05000000, size 4 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0x7f800000, size 8 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xe5800000, size 128 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xe3000000, size 40 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: regions without no-map are not yet supported
[    0.000000@0] Reserved memory: created CMA memory pool at 0xcfc00000, size 308 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[    0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[    0.000000@0] Reserved memory: created CMA memory pool at 0xcbc00000, size 64 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,vdin0_cma, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xc7c00000, size 64 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,vdin1_cma, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xc6c00000, size 16 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,galcore, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xc0400000, size 104 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,isp_cma, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xbec00000, size 24 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,adapt_cma, compatible id shared-dma-pool
[    0.000000@0] cma: Reserved 8 MiB at 0xbe400000
[    0.000000@0] Memory policy: Data cache writealloc
[    0.000000@0] psci: probing for conduit method from DT.
[    0.000000@0] psci: PSCIv1.0 detected in firmware.
[    0.000000@0] psci: Using standard PSCI v0.2 function IDs
[    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000@0] psci: SMC Calling Convention v1.1
[    0.000000@0] percpu: Embedded 15 pages/cpu @ee1b1000 s32140 r8192 d21108 u61440
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 971264
[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=1 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,444,12bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable wol_enable=0 spi_state=0 fusb302_state=1 hwver=VIM3.V12 factory_mac=c8:63:14:70:48:07 androidboot.hardware=amlogic androidboot.serialno=c86314704807 mac=c8:63:14:70:48:07 androidboot.mac=c8:63:14:70:48:07 ro rootwait skip_initramfs androidboot.dtbo_idx=0 --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
[    0.000000@0] fb: osd0
[    0.000000@0] fb: loaded
[    0.000000@0] fb: 0x3d800000
[    0.000000@0] vout: 1080p60hz
[    0.000000@0] vout: enable: 1
[    0.000000@0] lcd: panel_type: lcd_1
[    0.000000@0] vout: get hdmimode: 1080p60hz
[    0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1[    0.000000@0] vout: get cvbsmode: 576cvbs
[    0.000000@0] vpp_axis_reverse: bootargs is 0
[    0.000000@0] phlock_phase_config: bootargs is 0.
[    0.000000@0] jtag: jtag select disable
[    0.000000@0] init_wol_state, wol_enable=0
[    0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000@0] Memory: 3047716K/3891200K available (14336K kernel code, 1256K rwdata, 4916K rodata, 1024K init, 1338K bss, 57052K reserved, 786432K cma-reserved, 2322432K highmem)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000@0]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000@0]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000@0]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000@0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000@0]     modules : 0xbc000000 - 0xbfe00000   (  62 MB)
[    0.000000@0]       .text : 0xc0108000 - 0xc1000000   (15328 kB)
[    0.000000@0]       .init : 0xc1600000 - 0xc1700000   (1024 kB)
[    0.000000@0]       .data : 0xc1700000 - 0xc183a3b8   (1257 kB)
[    0.000000@0]        .bss : 0xc183c000 - 0xc198abc4   (1339 kB)
[    0.000000@0] zone:Normal, spaned pages:196608, total:196608
[    0.000000@0] zone:HighMem, spaned pages:776192, total:972800
[    0.000000@0] page_trace_pre_work, trace buffer:edc00000, size:3b6000, used:edfb6000, end:ee000000
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0]        Build-time adjustment of leaf fanout to 32.
[    0.000000@0]        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=6
[    0.000000@0] NR_IRQS:16 nr_irqs:16 16
[    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000@0] g12a_aoclkc_init: register ao clk ok!
[    0.000000@0] Meson chip version = RevB (29:B - 10:0)
[    0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000@0] meson_g12a_gpu_init: register meson gpu clk
[    0.000000@0] meson_g12a_media_init: register meson media clk
[    0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
[    0.000000@0] meson_g12a_misc_init: done.
[    0.000000@0] g12a_clkc_init initialization complete
[    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
[    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008224@0] Switching to timer-based delay loop, resolution 41ns
[    0.014469@0] meson_bc_timer: mclk->mux_reg =f080c190,mclk->reg =f080e194
[    0.021987@0] Console: colour dummy device 80x30
[    0.025923@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.036397@0] pid_max: default: 32768 minimum: 301
[    0.041258@0] thread_stack_cache_init, vmap:ed822980, bitmap:ed828400, cache page:be000
[    0.049275@0] thread_stack_cache_init, allocation vm area:ed823e00, addr:bc000000, size:3001000
[    0.058059@0] Security Framework initialized
[    0.062309@0] SELinux:  Initializing.
[    0.066054@0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.072815@0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.080701@0] CPU: Testing write buffer coherency: ok
[    0.085135@0] ftrace: allocating 43898 entries in 129 pages
[    0.170789@0] sched-energy: Sched-energy-costs installed from DT
[    0.171165@0] CPU0: update cpu_capacity 631
[    0.175399@0] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.181255@0] Setting up static identity map for 0x200000 - 0x200058
[    0.236105@0] secmon: clear_range:5100000 200000
[    0.284532@1] CPU1: update cpu_capacity 631
[    0.284537@1] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.317178@2] CPU2: update cpu_capacity 1192
[    0.317183@2] CPU2: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.348734@3] CPU3: update cpu_capacity 1192
[    0.348738@3] CPU3: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.380829@4] CPU4: update cpu_capacity 1192
[    0.380833@4] CPU4: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.412933@5] CPU5: update cpu_capacity 1192
[    0.412937@5] CPU5: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.413035@0] Brought up 6 CPUs
[    0.461176@0] SMP: Total of 6 processors activated (288.00 BogoMIPS).
[    0.467659@0] CPU: All CPU(s) started in SVC mode.
[    0.473975@3] addr:bc061cce is in kernel, size fix 4096->10, data:mode=0755
[    0.479624@3] devtmpfs: initialized
[    0.501675@3] VFP support v0.3: implementor 41 architecture 3 part 40 variant 9 rev 0
[    0.504137@3] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.513874@3] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.520498@3] pinctrl core: initialized pinctrl subsystem
[    0.526574@3] NET: Registered protocol family 16
[    0.532783@3] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.537486@3] schedtune: init normalization constants...
[    0.542831@3] schedtune: CLUSTER[0-1]      min_pwr:     0 max_pwr:    42
[    0.549559@3] schedtune: CPU[0]            min_pwr:     0 max_pwr:   279
[    0.556294@3] schedtune: CPU[1]            min_pwr:     0 max_pwr:   279
[    0.563032@3] schedtune: CLUSTER[2-5]      min_pwr:     0 max_pwr:   110
[    0.569769@3] schedtune: CPU[2]            min_pwr:     0 max_pwr:  1048
[    0.576505@3] schedtune: CPU[3]            min_pwr:     0 max_pwr:  1048
[    0.583244@3] schedtune: CPU[4]            min_pwr:     0 max_pwr:  1048
[    0.589985@3] schedtune: CPU[5]            min_pwr:     0 max_pwr:  1048
[    0.596727@3] schedtune: SYSTEM            min_pwr:     0 max_pwr:  4902
[    0.603465@3] schedtune: using normalization constants mul: 2882587190 sh1: 1 sh2: 12
[    0.611337@3] schedtune: verify normalization constants...
[    0.616845@3] schedtune: max_pwr/2^0: 4902 => norm_pwr:  1024
[    0.622625@3] schedtune: max_pwr/2^1: 2451 => norm_pwr:   512
[    0.628394@3] schedtune: max_pwr/2^2: 1225 => norm_pwr:   255
[    0.634174@3] schedtune: max_pwr/2^3:  612 => norm_pwr:   127
[    0.639944@3] schedtune: max_pwr/2^4:  306 => norm_pwr:    63
[    0.645718@3] schedtune: max_pwr/2^5:  153 => norm_pwr:    31
[    0.651493@3] schedtune: configured to support 5 boost groups
[    0.673322@0] cpuidle: using governor menu
[    0.673449@0] register canvas platform driver
[    0.676172@0] register rdma platform driver
[    0.680404@0] aml_vdac_init: module init
[    0.687640@0] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.692528@0] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.698883@4] clkmsr: clkmsr: driver init
[    0.702559@4] codec_mm_module_init
[    0.706023@4] media_configs_system_init
[    0.710445@4] pstore: using zlib compression
[    0.714627@4] console [pstore-1] enabled
[    0.718082@4] pstore: Registered ramoops as persistent store backend
[    0.724462@4] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[    0.730142@4] ramoops: ramoops_io_en:0 1 old:0x0 ftrace_size:0x40000[    0.738212@4] aml_iomap: amlogic iomap probe done
[    0.741533@4] vpu: driver version: v20190314(8-g12b)
[    0.746067@4] vpu: load vpu_clk: 666666667Hz(7)
[    0.750776@4] vpu: clktree_init
[    0.753793@4] vpu: vpu_probe OK
[    0.761272@0] clkmsr: msr_clk_reg0=f09bc004,msr_clk_reg2=f09be00c
[    0.763094@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.775699@0] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
[    0.776887@0] aml_vdac_probe: ok
[    0.780123@0] canvas_probe reg=ff638000,size=2000
[    0.784680@0] canvas maped reg_base =f09c0000
[    0.797912@0] rdma_probe,cpu_type:0, ver:0, len:8
[    0.798165@0] rdma_register, rdma_table_addr f09e1000 rdma_table_addr_phy be440000 reg_buf ed0a8000
[    0.806097@0] rdma_register success, handle 1 table_size 32768
[    0.811953@0] set_rdma_handle video rdma handle = 1.
[    0.816929@0] g12b revb!!!!
[    0.819787@0] rdma_register, rdma_table_addr f09ea000 rdma_table_addr_phy be448000 reg_buf ed0b0000
[    0.828840@0] rdma_register success, handle 2 table_size 32768
[    0.834693@0] set_rdma_handle video rdma handle = 2.
[    0.840917@0] aml_snd_reg_map[0], reg:ff640000, size:2000
[    0.845129@0] aml_snd_reg_map[1], reg:ff642000, size:2000
[    0.850552@0] aml_snd_reg_map[2], reg:ff64a000, size:2000
[    0.855966@0] aml_snd_reg_map[3], reg:ff656000, size:1800
[    0.861396@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
[    0.866805@0] amlogic auge_snd_iomap probe done
[    0.874322@0] cvbs_out: cvbsout_probe, cpu_id:5,name:meson-g12b-cvbsout
[    0.878035@0] cvbs_out: clk path:0
[    0.881402@0] cvbs_out: error: failed to get vdac_config
[    0.886901@0] vout: vout1: register server: cvbs_vout_server
[    0.892447@0] cvbs_out: register cvbs module server ok
[    0.897614@0] vout: vout2: register server: cvbs_vout2_server
[    0.903380@0] cvbs_out: register cvbs module vout2 server ok
[    0.909069@0] cvbs_out: chrdev devno 264241152 for disp
[    0.914524@0] cvbs_out: create cdev cvbs
[    0.918240@0] cvbs_out: cvbsout_probe OK
[    0.922740@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.929913@2] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.937266@2] codec_mm_probe ok
[    1.135250@0] vgaarb: loaded
[    1.135611@0] khadas_hwver_probe
[    1.136074@0] SCSI subsystem initialized
[    1.139983@0] usbcore: registered new interface driver usbfs
[    1.145412@0] usbcore: registered new interface driver hub
[    1.151011@2] usbcore: registered new device driver usb
[    1.156216@2] Linux video capture interface: v2.00
[    1.161041@2] pps_core: LinuxPPS API ver. 1 registered
[    1.166118@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.175473@2] PTP clock support registered
[    1.180248@4] secmon: reserve_mem_size:0x300000
[    1.184187@4] secmon secmon: assigned reserved memory node linux,secmon
[    1.190991@4] secmon: get page:ee2e7000, 5000
[    1.195137@4] secmon: share in base: 0xc50fe000, share out base: 0xc50ff000
[    1.202126@4] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    1.210387@4] fb: osd_init_module
[    1.212218@4] fb: viu vsync irq: 58
[    1.215442@4] fb: viu2 vsync irq: 67
[    1.219069@4] 0x000000d8:Y=d8,U=0,V=0
[    1.222697@4] 0x000000d9:Y=d9,U=0,V=0
[    1.226353@4] 0x000000da:Y=da,U=0,V=0
[    1.230038@4] 0x000000db:Y=db,U=0,V=0
[    1.233703@4] 0x000000dc:Y=dc,U=0,V=0
[    1.237393@4] 0x000000dd:Y=dd,U=0,V=0
[    1.241455@4] fb: osd_rdma_init: rdma_table p=0xbe450000,op=0xbe450000 , v=0xf0adb000
[    1.248975@4] rdma_register, rdma_table_addr f0add000 rdma_table_addr_phy be451000 reg_buf edbc4000
[    1.258041@4] rdma_register success, handle 3 table_size 4096
[    1.263819@4] fb: osd_rdma_init:osd rdma handle = 3.
[    1.268809@4] fb: mem_size: 0x800000
[    1.272378@4] fb: mem_size: 0x1980000
[    1.276104@4] fb: mem_size: 0x100000
[    1.279673@4] fb: mem_size: 0x100000
[    1.283239@4] fb: mem_size: 0x800000
[    1.286853@4] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
[    1.294020@2] fb: reserved memory base:0x7f800000, size:800000
[    1.300150@2] vout: error: invalid vinfo1. current vmode is not supported
[    1.306691@2] fb: init fbdev bpp is:32
[    1.311995@0] fb: set osd0 reverse as NONE
[    1.314563@0] vout: error: invalid vinfo1. current vmode is not supported
[    1.326086@0] fb: osd probe OK
[    1.326867@0] hdmitx: system: amhdmitx_probe start
[    1.329254@0] hdmitx: system: Ver: 20190624
[    1.333508@0] hdmitx: system: hdmitx_device.chip_type : 11
[    1.339007@0] hdmitx: system: not find product desc
[    1.343900@0] hdmitx: system: not find match pwr-ctl
[    1.348898@0] hdmitx: system: not find drm_amhdmitx
[    1.353787@0] hdmitx: system: hpd irq = 51
[    1.357977@0] hdmitx: system: hdcp22_tx_skp failed to probe
[    1.363504@0] hdmitx: system: hdcp22_tx_esm failed to probe
[    1.369605@0] vout: vout1: register server: hdmitx_vout_server
[    1.374961@0] vout: vout2: register server: hdmitx_vout2_server
[    1.381632@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[    1.386070@0] hdmitx: hdmitx20: Mapped PHY: 0xff634400
[    1.391230@0] hdmitx: hdmitx20: Mapped PHY: 0xff900000
[    1.396402@0] hdmitx: hdmitx20: Mapped PHY: 0xff800000
[    1.401548@0] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
[    1.406717@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[    1.411880@0] hdmitx: hdmitx20: Mapped PHY: 0xff608000
[    1.417033@0] hdmitx: hdmitx20: Mapped PHY: 0xff600000
[    1.422197@0] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
[    1.427372@0] hdmitx: hw: alread display in uboot 0x10
[    1.432538@0] hdmitx: hw: avmute set to 1
[    1.436544@0] hdmitx: system: fmt_attr 444,12bit
[    1.441278@0] hdmitx: system: amhdmitx_probe end
[    1.445834@0] hdmitx: system: irq 80000002 0
[    1.450765@0] lcd: driver version: 20181012(6-g12b)
[    1.455168@0] lcd: detect mode: tablet, fr_auto_policy: 0, key_valid: 0
[    1.461914@0] lcd: lcd_clktree_probe
[    1.465229@0] lcd: status: 0
[    1.468135@0] vout: vout1: register server: lcd_vout_server
[    1.473733@0] vout: vout2: register server: lcd_vout2_server
[    1.479431@0] lcd: lcd_get_config from dts
[    1.483537@0] lcd: no range_setting
[    1.487063@0] lcd: TL070WSH27, mipi, 8bit, 1024x600
[    1.491940@0] lcd: pixel_clk = 47.250MHz, bit_rate = 283.500MHz
[    1.498194@0] lcd: lcd_fops_create OK
[    1.501544@0] vout: error: invalid vinfo1. current vmode is not supported
[    1.508387@0] fb: current vmode=invalid, cmd: 0x20000
[    1.513490@0] lcd: request lcd_vsync_irq successful
[    1.518364@0] lcd: request lcd_vsync2_irq successful
[    1.523343@0] lcd: lcd_probe ok
[    1.526892@0] vout: create vout attribute OK
[    1.530961@0] vout: vout_fops_create OK
[    1.534617@0] vout: vout1: register server: nulldisp_vout_server
[    1.540799@0] vout: tvout monitor interval:500(ms), timeout cnt:20
[    1.546915@0] hdmitx: hdmitx_set_current_vmode[3688]
[    1.551869@0] hdmitx: system: recalc before 1080p60hz 60 1
[    1.557382@0] hdmitx: system: recalc after 1080p60hz 2997 50
[    1.563086@0] hdmitx: alread display in uboot
[    1.567444@0] vout: init mode 1080p60hz set ok
[    1.571905@0] vout: aml_tvout_mode_monitor
[    1.576025@0] vout: aml_vout_probe OK
[    1.580527@2] chip type:0x29
[    1.583058@2] Advanced Linux Sound Architecture Driver Initialized.
[    1.589427@2] Bluetooth: Core ver 2.22
[    1.592689@2] NET: Registered protocol family 31
[    1.597282@2] Bluetooth: HCI device and connection manager initialized
[    1.603911@2] Bluetooth: HCI socket layer initialized
[    1.608933@2] Bluetooth: L2CAP socket layer initialized
[    1.614200@2] Bluetooth: SCO socket layer initialized
[    1.619622@3] NetLabel: Initializing
[    1.622838@3] NetLabel:  domain hash size = 128
[    1.627375@3] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.632579@3] NetLabel:  unlabeled traffic allowed by default
[    1.642110@1] clocksource: Switched to clocksource arch_sys_counter
[    1.710731@1] VFS: Disk quotas dquot_6.6.0
[    1.710806@1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.729402@1] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
[    1.729436@1] jtag: module init
[    1.732453@1] NET: Registered protocol family 2
[    1.737291@1] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.744031@1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.750726@1] TCP: Hash tables configured (established 8192 bind 8192)
[    1.757226@1] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.763333@1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.770013@1] NET: Registered protocol family 1
[    1.776570@1] wifi: power_on_pin_OD = 0;
[    1.778374@1] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
[    1.784306@1] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
[    1.790960@1] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
[    1.797604@1] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
[    1.803806@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
[    1.811663@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
[    1.817809@1] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
[    1.823767@1] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
[    1.830758@1] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
[    1.836635@1] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
[    1.842629@1] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
[    1.847990@1] aml_wifi wifi: [wifi_setup_dt] irq num is:(85)
[    1.853596@1] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
[    1.859556@1] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
[    1.870784@0] enable_pmuserenr_all() start
[    1.870822@0] enable_pmuserenr_all() end
[    1.873452@0] hw perfevents: clusterb_enabled = 1
[    1.878212@0] hw perfevents: cpumasks 0x3, 0x3c
[    1.882769@0] hw perfevents: cluster A irq = 25
[    1.887334@0] hw perfevents: cluster B irq = 26
[    1.891908@0] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    1.904533@3] audit: initializing netlink subsys (disabled)
[    1.905857@3] audit: type=2000 audit(1.636:1): initialized
[    1.912254@4] workingset: timestamp_bits=30 max_order=20 bucket_order=0
[    1.925198@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.925912@0] exFAT: Version 1.2.9
[    1.930496@0] Registering sdcardfs 0.1
[    1.932984@0] ntfs: driver 2.1.32 [Flags: R/O].
[    1.937656@0] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.945434@0] fuse init (API version 7.26)
[    1.955613@0] NET: Registered protocol family 38
[    1.955648@0] Key type asymmetric registered
[    1.958894@0] Asymmetric key parser 'x509' registered
[    1.964167@0] bounce: pool size: 64 pages
[    1.968200@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    1.975625@0] io scheduler noop registered (default)
[    1.980613@0] io scheduler deadline registered
[    1.985080@0] io scheduler cfq registered
[    1.994354@0] hdmitx: system: plugin
[    2.028519@2] random: fast init done
[    2.028581@2] random: crng init done
[    2.039938@4] brd: module loaded
[    2.046565@5] loop: module loaded
[    2.047420@5] zram: Added device: zram0
[    2.048171@5] mcu_probe
[    2.051612@5] mcu version is 2
[    2.054893@5] create_mcu_attrs
[    2.056757@5] mcu_probe,wol enable=0
[    2.062407@4] mtdoops: mtd device (mtddev=name/number) must be supplied
[    2.067577@4] libphy: Fixed MDIO Bus: probed
[    2.071438@4] tun: Universal TUN/TAP device driver, 1.6
[    2.076429@4] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.083584@2]  REG0:Addr = f0cf9540
[    2.086329@2] read auto_cali_idx fail
[    2.089981@2] Not set  cali_val for REG1
[    2.094399@1] meson6-dwmac ff3f0000.ethernet: no reset control found
[    2.100337@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    2.105566@1]  Ring mode enabled
[    2.108813@1]  DMA HW capability register supported[    2.113528@1]  Normal descriptors
[    2.116894@3]  RX Checksum Offload Engine supported
[    2.121756@3]        COE Type 2
[    2.124384@3]  TX Checksum insertion supported
[    2.126448@0] hdmitx: edid: EDID Parser:
[    2.126451@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.126453@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.126455@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.126462@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.126465@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.126467@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.126472@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.126474@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.126476@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.126490@0] hdmitx: edid: get dtd0 vic: 16
[    2.126493@0] hdmitx: hdmitx: get PMT vic: 16
[    2.126496@0] hdmitx: edid: find IEEEOUT
[    2.126524@0] hdmitx: edid: check sum valid
[    2.126526@0] hdmitx: edid: check sum valid
[    2.126531@0] hdmitx: edid: update rx hdr info 0 at edid parsing
[    2.126535@0] hdmitx: edid: check sum valid
[    2.126537@0] hdmitx: edid: check sum valid
[    2.126540@0] hdmitx: edid: blk0 raw data
[    2.126577@0] hdmitx: edid:
[    2.126577@0] 00ffffffffffff0004720003fff020510c190103803c2278ca7b45a4554aa227
[    2.126577@0] 0b5054bfef80714f8140818081c081009500b300d1c0023a801871382d40582c
[    2.126577@0] 450056502100001e000000fd00384c1f5311000a202020202020000000fc0047
[    2.126577@0] 323736484c0a202020202020000000ff004c57394346303033383535340a01a0
[    2.126577@0]
[    2.126577@0]
[    2.126580@0] hdmitx: edid: blk1 raw data
[    2.126615@0] hdmitx: edid:
[    2.126615@0] 020324f14f01020304050607901112131415161f230907078301000067030c00
[    2.126615@0] 1000382d023a801871382d40582c450056502100001f011d8018711c1620582c
[    2.126615@0] 250056502100009f011d007251d01e206e28550056502100001e8c0ad08a20e0
[    2.126615@0] 2d10103e960056502100001800000000000000000000000000000000000000de
[    2.126615@0]
[    2.126615@0]
[    2.126619@0] hdmitx: system: update physcial size: 600 340
[    2.126624@0] hdmitx: hw: set audio
[    2.126629@0] hdmitx: hw: hdmitx tx_aud_src = 0
[    2.126642@0] hdmitx: fs = 0, cd = 6, tmds_clk = 0
[    2.126645@0] hdmitx: hw: aud_n_para = 6144
[    2.126653@0] hdmitx: hw: set channel status
[    2.315478@3]  Wake-Up On Lan supported
[    2.319363@3]  Enable RX Mitigation via HW Watchdog Timer
[    2.327969@0] libphy: stmmac: probed
[    2.328332@0] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    2.334995@0] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[    2.342315@3] PPP generic driver version 2.4.2
[    2.345673@0] PPP BSD Compression module registered
[    2.350400@0] PPP Deflate Compression module registered
[    2.355669@0] PPP MPPE Compression module registered
[    2.360643@0] NET: Registered protocol family 24
[    2.365375@0] usbcore: registered new interface driver asix
[    2.370959@0] usbcore: registered new interface driver ax88179_178a
[    2.377247@0] usbcore: registered new interface driver cdc_ether
[    2.383259@0] usbcore: registered new interface driver net1080
[    2.389133@0] usbcore: registered new interface driver cdc_subset
[    2.395256@0] usbcore: registered new interface driver zaurus
[    2.401050@0] usbcore: registered new interface driver cdc_ncm
[    2.406887@0] usbcore: registered new interface driver qmi_wwan
[    2.413430@4] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.419556@4] ehci-pci: EHCI PCI platform driver
[    2.424225@4] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.430561@4] ohci-pci: OHCI PCI platform driver
[    2.435632@4] usbcore: registered new interface driver cdc_acm
[    2.441048@4] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.449317@4] usbcore: registered new interface driver cdc_wdm
[    2.455185@4] usbcore: registered new interface driver usb-storage
[    2.461419@4] usbcore: registered new interface driver usbserial
[    2.467419@4] usbcore: registered new interface driver option
[    2.473183@4] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.480682@3] mousedev: PS/2 mouse device common for all mice
[    2.486357@3] usbcore: registered new interface driver xpad
[    2.491763@3] edt_ft5x06 3-0038: probing for EDT FT5x06 I2C
[    2.823078@0] edt_ft5x06 3-0038: touchscreen probe failed
[    2.823200@0] sensor_register_slave:kxtj3,id=0
[    2.836974@0] khadas-rtc 4-0051: rtc core: registered khadas-rtc as rtc0
[    2.838144@4] i2c /dev entries driver
[    2.842425@4] IR NEC protocol handler initialized
[    2.846458@4] IR RC5(x/sz) protocol handler initialized
[    2.851725@4] IR RC6 protocol handler initialized
[    2.856440@4] IR JVC protocol handler initialized
[    2.861173@4] IR Sony protocol handler initialized
[    2.865965@4] IR SANYO protocol handler initialized
[    2.870879@4] IR Sharp protocol handler initialized
[    2.875767@4] IR MCE Keyboard/mouse protocol handler initialized
[    2.881803@4] IR XMP protocol handler initialized
[    2.886629@4] usbcore: registered new interface driver uvcvideo
[    2.892485@4] USB Video Class driver (1.1.1)
[    2.896827@4] usbcore: registered new interface driver cx231xx
[    2.902631@4] md: linear personality registered for level -1
[    2.908764@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    2.917177@3] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
[    2.925418@3] Bluetooth: HCI UART driver ver 2.3
[    2.930029@3] Bluetooth: HCI UART protocol H4 registered
[    2.936947@0] ledtrig-cpu: registered to indicate activity on CPUs
[    2.942123@0] hidraw: raw HID events driver (C) Jiri Kosina
[    2.947672@4] usbcore: registered new interface driver usbhid
[    2.952947@4] usbhid: USB HID core driver
[    2.957138@0] ashmem: initialized
[    2.961504@0] value of voltage_tolerance 0
[    2.965218@0] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
[    2.970992@0] value of voltage_tolerance 0
[    2.975116@0] cpu cpu2: meson_cpufreq_init: CPU 2 initialized
[    2.980713@0] meson_cpufreq_probe: Registered platform drive
[    2.985923@0] ff803000.serial: clock gate not found
[    2.990690@0] meson_uart ff803000.serial: ==uart0 reg addr = f0cfd000
[    2.997193@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 40, base_baud = 1500000) is a meson_uart
[    3.012167@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[    3.014832@0] console [ttyS0] enabled
[    3.014832@0] console [ttyS0] enabled
[    3.022086@0] bootconsole [aml-uart0] disabled
[    3.022086@0] bootconsole [aml-uart0] disabled
[    3.031359@0] meson_uart ffd24000.serial: ==uart1 reg addr = f0eae000
[    3.037381@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 49, base_baud = 1500000) is a meson_uart
[    3.046997@5] meson_uart ffd22000.serial: ==uart3 reg addr = f0ec1000
[    3.053155@5] ffd22000.serial: ttyS3 at MMIO 0xffd22000 (irq = 50, base_baud = 1500000) is a meson_uart
[    3.063093@5] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xf0ee4000
[    3.072784@5] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xf0eef080
[    3.083176@5] Error: Driver 'meson_reset' is already registered, aborting...
[    3.090466@5] gpio-keypad gpio_keypad: power key(116) registed.
[    3.095732@5] input: gpio_keypad as /devices/platform/gpio_keypad/input/input1
[    3.103036@4] meson-remote: Driver init
[    3.106734@4] meson-remote: remote_probe
[    3.110574@4] meson-remote ff808040.rc: protocol = 0x1
[    3.115676@4] meson-remote ff808040.rc: don't find the node <led_blink>
[    3.122270@4] meson-remote ff808040.rc: led_blink = 0
[    3.127290@4] meson-remote ff808040.rc: don't find the node <led_blink_frq>
[    3.134223@4] meson-remote ff808040.rc: led_blink_frq  = 100
[    3.139865@4] meson-remote ff808040.rc: platform_data irq =48
[    3.145589@4] meson-remote ff808040.rc: custom_number = 1
[    3.150957@4] meson-remote ff808040.rc: ptable->map_size = 13
[    3.156669@4] meson-remote ff808040.rc: ptable->custom_name = khadas-ir
[    3.163257@4] meson-remote ff808040.rc: ptable->custom_code = 0xff00
[    3.169587@4] meson-remote ff808040.rc: ptable->release_delay = 80
[    3.175740@4] meson-remote ff808040.rc: default protocol = 0x1 and id = 0
[    3.182498@4] meson-remote ff808040.rc: reg=0x0, val=0x1f40190
[    3.188303@4] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8
[    3.194109@4] meson-remote ff808040.rc: reg=0x8, val=0x960050
[    3.199828@4] meson-remote ff808040.rc: reg=0xc, val=0x480028
[    3.205551@4] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013
[    3.211528@4] meson-remote ff808040.rc: reg=0x18, val=0x8616800
[    3.217424@4] meson-remote ff808040.rc: reg=0x1c, val=0x9f00
[    3.223055@4] meson-remote ff808040.rc: reg=0x20, val=0x0
[    3.228428@4] meson-remote ff808040.rc: reg=0x24, val=0x0
[    3.233804@4] meson-remote ff808040.rc: reg=0x28, val=0x0
[    3.239462@5] input: aml_keypad as /devices/platform/ff808040.rc/input/input2
[    3.246648@0] meson-remote: IR XMP protocol handler initialized
[    3.252404@2] efuse_probe: Unable to map efuse base
[    3.258758@0] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
[    3.264659@0] ge2d: ge2d_init_module
[    3.268005@0] ge2d: ge2d_dev major:235
[    3.271748@0] ge2d: clock source clk_ge2d_gate ec49d0c0
[    3.276731@0] ge2d: clock clk_ge2d source ec49d140
[    3.281504@0] ge2d: clock source clk_vapb_0 ec49d1c0
[    3.286417@0] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
[    3.293684@0] ge2d: ge2d clock is 499 MHZ
[    3.297616@0] ge2d: find address resource
[    3.301594@0] ge2d: map io source 0xff940000,size=65536 to 0xf1010000
[    3.307995@0] ge2d: reserved mem init failed
[    3.312248@0] ge2d: ge2d: pdev=ed062400, irq=57, clk=ec49d0c0
[    3.317990@0] ge2d: ge2d start monitor
[    3.321754@2] ge2d: ge2d workqueue monitor start
[    3.322127@3] [tsync_pcr_init]init success.
[    3.322212@3] amvideom vsync irq: 58
[    3.322696@4] hdmitx: hdcp: hdmitx_hdcp_init
[    3.326744@0] vout: vout2: create vout2 attribute OK
[    3.326838@4] vout: vout2: vout2_fops_create OK
[    3.326928@4] vout: vout2: clktree_init
[    3.326929@4] vout: vout2: register server: nulldisp_vout2_server
[    3.326993@4] vout: vout2: init mode null set ok
[    3.326994@4] vout: vout2: aml_vout2_probe OK
[    3.327055@4] DI: di_module_init ok.
[    3.327057@4] DI: di_module_init: major 509
[    3.327250@4] deinterlace deinterlace: assigned reserved memory node linux,di_cma
[    3.327253@4] di:flag_cma=1
[    3.327254@4] DI: CMA size 0x2800000.
[    3.327263@4] pre_irq:82
[    3.327268@4] post_irq:83
[    3.327269@4] DI: di_probe allocate rdma channel 0.
[    3.327272@4] di_get_vpu_clkb: get clk vpu error.
[    3.327274@4] DI: vpu clkb <334000000, 667000000>
[    3.327288@4] get clkb rate:333333328
[    3.327291@4] DI:enable vpu clkb.
[    3.327298@4] 0x000000de:Y=de,U=0,V=0
[    3.327299@4] 0x000000df:Y=df,U=0,V=0
[    3.327300@4] 0x000000e0:Y=e0,U=0,V=0
[    3.327301@4] 0x000000e1:Y=e1,U=0,V=0
[    3.327302@4] 0x000000e2:Y=e2,U=0,V=0
[    3.327303@4] 0x000000e3:Y=e3,U=0,V=0
[    3.327303@4] 0x000000f0:Y=f0,U=0,V=0
[    3.327304@4] 0x000000f1:Y=f1,U=0,V=0
[    3.327305@4] 0x000000f2:Y=f2,U=0,V=0
[    3.327306@4] 0x000000f3:Y=f3,U=0,V=0
[    3.327309@4] 0x000000f4:Y=f4,U=0,V=0
[    3.327310@4] 0x000000f5:Y=f5,U=0,V=0
[    3.327310@4] 0x000000f6:Y=f6,U=0,V=0
[    3.327311@4] 0x000000f7:Y=f7,U=0,V=0
[    3.327312@4] 0x000000f8:Y=f8,U=0,V=0
[    3.327313@4] 0x000000f9:Y=f9,U=0,V=0
[    3.327315@4] 0x000000fa:Y=fa,U=0,V=0
[    3.327316@4] 0x000000fb:Y=fb,U=0,V=0
[    3.327317@4] 0x000000fc:Y=fc,U=0,V=0
[    3.327318@4] 0x000000fd:Y=fd,U=0,V=0
[    3.327319@4] 0x000000fe:Y=fe,U=0,V=0
[    3.327319@4] 0x000000ff:Y=ff,U=0,V=0
[    3.327321@4] 0x0000003a:Y=3a,U=0,V=0
[    3.327322@4] 0x0000003b:Y=3b,U=0,V=0
[    3.327323@4] 0x0000003c:Y=3c,U=0,V=0
[    3.327324@4] DI: support multi decoding 58~59~60.
[    3.327422@4] DI: di_probe:Di use HRTIMER
[    3.338326@4] di_probe:ok
[    3.338376@4] vdin_drv_init: major 508
[    3.343210@4] rdma_register, rdma_table_addr f1003000 rdma_table_addr_phy be452000 reg_buf ec5da200
[    3.343212@4] rdma_register success, handle 4 table_size 512
[    3.343213@4] vdin_drv_probe:vdin.0 rdma hanld 4.
[    3.343306@4] vdin vdin0: assigned reserved memory node linux,vdin0_cma
[    3.343307@4]
[    3.343307@4]  vdin memory resource done.
[    3.343310@4] vdin0 cma_mem_size = 64 MB
[    3.343311@4] vdin0 irq: 55 rdma irq: 2
[    3.343313@4] set_canvas_manual = 0
[    3.343314@4] no urgent_en found
[    3.343330@4] get fclk_div5 err
[    3.343332@4] vdin_drv_probe: vdin cannot get msr clk !!!
[    3.343344@4] vdin_drv_probe: driver initialized ok
[    3.343377@4] rdma_register, rdma_table_addr f1005000 rdma_table_addr_phy be453000 reg_buf ec5da600
[    3.343378@4] rdma_register success, handle 5 table_size 512
[    3.343379@4] vdin_drv_probe:vdin.1 rdma hanld 5.
[    3.343467@4] vdin vdin1: assigned reserved memory node linux,vdin1_cma
[    3.343468@4]
[    3.343468@4]  vdin memory resource done.
[    3.343469@4] vdin1 cma_mem_size = 64 MB
[    3.343471@4] vdin1 irq: 56 rdma irq: 4
[    3.343472@4] set_canvas_manual = 0
[    3.343473@4] no urgent_en found
[    3.343485@4] get fclk_div5 err
[    3.343486@4] vdin_drv_probe: vdin cannot get msr clk !!!
[    3.343491@4] vdin_debugfs_init only support debug vdin0 1
[    3.343492@4] vdin_drv_probe: driver initialized ok
[    3.343546@4] vdin_drv_init: vdin driver init done
[    3.343548@4] [viuin..]viuin_init_module viuin module init
[    3.343673@4] [viuin..]viuin_probe probe ok.
[    3.343908@4] [RX]-hdmirx: hdmirx_init.
[    3.343909@4] ESM HLD: Initializing...
[    3.343969@4] tvin_afe: tvafe_drv_init: major 506
[    3.344117@4] tvin_afe: tvafe_drv_init.
[    3.344204@4] tvafe_vbi: vbi: vbi_init.
[    3.344303@4] amvdec_csi module: init.
[    3.344305@4] amvdec_csi_init_module:major 504
[    3.344397@4] amvdec_csi module: init. ok
[    3.344399@4] amlvid:info: amlvideo_init called
[    3.344399@4] amlvid:info: amlvideo_create_instance called
[    3.344401@4] amlvid:info: v4l2_dev.name=:amlvideo-000
[    3.344472@4] amlvideo-000: V4L2 device registered as video10
[    3.344473@4] amlvid:info: amlvideo_create_instance called
[    3.344474@4] amlvid:info: v4l2_dev.name=:amlvideo-001
[    3.344533@4] amlvideo-001: V4L2 device registered as video23
[    3.344608@4] PPMGRDRV: warn: ppmgr module init func called
[    3.344668@4] PPMGRDRV: err: ppmgr_driver_probe called
[    3.344690@4] PPMGRDRV: info: ppmgr_dev major:503
[    3.344795@4] ppmgr: probe of ppmgr failed with error -22
[    3.345023@4] ionvideo-000: V4L2 device registered as video13
[    3.345083@4] ionvideo-001: V4L2 device registered as video14
[    3.345141@4] ionvideo-002: V4L2 device registered as video15
[    3.345202@4] ionvideo-003: V4L2 device registered as video16
[    3.345260@4] ionvideo-004: V4L2 device registered as video17
[    3.345318@4] ionvideo-005: V4L2 device registered as video18
[    3.345375@4] ionvideo-006: V4L2 device registered as video19
[    3.345441@4] ionvideo-007: V4L2 device registered as video20
[    3.345499@4] ionvideo-008: V4L2 device registered as video21
[    3.345501@4] ionvid: info: Video Technology Magazine Ion Video
[    3.345502@4] ionvid: info: Capture Board ver 1.0 successfully loaded
[    3.345583@4] picdec: picdec_driver_probe called.
[    3.345685@4] picdec: probe of picdec failed with error -22
[    3.345791@4] videosync_create_instance dev_s ec5dba00,dev_s->dev edb42080
[    3.345792@4] videosync_create_instance reg videosync.0
[    3.345909@0] aml_vecm_init:module init
[    3.345913@5] videosync_thread started
[    3.346023@5]
[    3.346023@5]  VECM probe start
[    3.346289@0] vlock_status_init vlock_en:0
[    3.346308@0] Can't find  wb_sel.
[    3.346310@0] hdr:Can't find  cfg_en_osd_100.
[    3.346311@0] Can't find  tx_op_color_primary.
[    3.346316@0] amlogic, vecm
[    3.346317@0] vlock dt support: 1
[    3.346318@0] vlock dt new_fsm: 0
[    3.346319@0] vlock dt hwver: 0
[    3.346320@0] vlock dt phlock_en: 0
[    3.346322@0] Can't find  vlock_en.
[    3.346323@0] Can't find  vlock_mode.
[    3.346325@0] Can't find  vlock_pll_m_limit.
[    3.346326@0] Can't find  vlock_line_limit.
[    3.346343@0] param_config vlock_en:0
[    3.346346@0] aml_vecm_probe: ok
[    3.346393@0] amdolby_vision_init:module init
[    3.346559@5]
[    3.346559@5]  amdolby_vision probe start & ver: 20181220
[    3.346561@5]
[    3.346561@5]  cpu_id=2 tvmode=0
[    3.346637@3] dolby_vision_init_receiver(dvel)
[    3.346638@3] dolby_vision_init_receiver: dvel
[    3.346730@3] amdolby_vision_probe: ok
[    3.346756@3] prime_sl module init
[    3.346903@3] reg base = f102d000
[    3.347170@4] vm_init .
[    3.347632@4] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[    3.348156@3] meson-mmc: >>>>>>>>hostbase f1035000, dmode
[    3.348302@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    3.348303@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[    3.395506@3] meson-mmc: meson_mmc_probe() : success!
[    3.398824@4] meson-mmc: >>>>>>>>hostbase f10bf000, dmode
[    3.398841@4] meson-mmc: gpio_cd = 1ca
[    3.441517@3] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
[    3.441519@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[    3.441520@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[    3.441523@3] meson-mmc: Data 1 aligned delay is 0
[    3.441524@3] meson-mmc: emmc: clk 199999997 tuning start
[    3.442449@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    3.442473@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    3.443113@4] meson-mmc: meson_mmc_probe() : success!
[    3.443385@3] meson-mmc: emmc: rx_tuning_result[2] = 40
[    3.443973@5] meson-mmc: >>>>>>>>hostbase f1149000, dmode
[    3.444158@5] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    3.444159@5] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[    3.444465@3] meson-mmc: emmc: rx_tuning_result[3] = 40
[    3.445373@3] meson-mmc: emmc: rx_tuning_result[4] = 40
[    3.445375@3] meson-mmc: emmc: best_win_start =2, best_win_size =3
[    3.445377@3] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[    3.445461@3] emmc: new HS200 MMC card at address 0001
[    3.445704@3] emmc: clock 199999997, 8-bit-bus-width
[    3.445704@3]
[    3.445704@3] mmcblk0: emmc:0001 BJTD4R 29.1 GiB
[    3.445809@3] mmcblk0boot0: emmc:0001 BJTD4R partition 1 4.00 MiB
[    3.445908@3] mmcblk0boot1: emmc:0001 BJTD4R partition 2 4.00 MiB
[    3.446023@3] mmcblk0rpmb: emmc:0001 BJTD4R partition 3 4.00 MiB
[    3.446531@3] meson-mmc: Enter aml_emmc_partition_ops
[    3.446827@3] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
[    3.446828@3] meson-mmc: add_emmc_partition
[    3.446897@3] meson-mmc: [mmcblk0p01]           bootloader  offset 0x000000000000, size 0x000000400000
[    3.446967@3] meson-mmc: [mmcblk0p02]             reserved  offset 0x000002400000, size 0x000004000000
[    3.447030@3] meson-mmc: [mmcblk0p03]                cache  offset 0x000006c00000, size 0x000046000000
[    3.447088@3] meson-mmc: [mmcblk0p04]                  env  offset 0x00004d400000, size 0x000000800000
[    3.447148@3] meson-mmc: [mmcblk0p05]                 logo  offset 0x00004e400000, size 0x000000800000
[    3.447205@3] meson-mmc: [mmcblk0p06]             recovery  offset 0x00004f400000, size 0x000001800000
[    3.447266@3] meson-mmc: [mmcblk0p07]                 misc  offset 0x000051400000, size 0x000000800000
[    3.447322@3] meson-mmc: [mmcblk0p08]                 dtbo  offset 0x000052400000, size 0x000000800000
[    3.447382@3] meson-mmc: [mmcblk0p09]             cri_data  offset 0x000053400000, size 0x000000800000
[    3.447453@3] meson-mmc: [mmcblk0p10]                param  offset 0x000054400000, size 0x000001000000
[    3.447510@3] meson-mmc: [mmcblk0p11]                 boot  offset 0x000055c00000, size 0x000001000000
[    3.447571@3] meson-mmc: [mmcblk0p12]                  rsv  offset 0x000057400000, size 0x000001000000
[    3.447629@3] meson-mmc: [mmcblk0p13]             metadata  offset 0x000058c00000, size 0x000001000000
[    3.447694@3] meson-mmc: [mmcblk0p14]               vbmeta  offset 0x00005a400000, size 0x000000200000
[    3.447751@3] meson-mmc: [mmcblk0p15]                  tee  offset 0x00005ae00000, size 0x000002000000
[    3.447809@3] meson-mmc: [mmcblk0p16]               vendor  offset 0x00005d600000, size 0x000014000000
[    3.447871@3] meson-mmc: [mmcblk0p17]                  odm  offset 0x000071e00000, size 0x000008000000
[    3.447927@3] meson-mmc: [mmcblk0p18]               system  offset 0x00007a600000, size 0x000050000000
[    3.447992@3] meson-mmc: [mmcblk0p19]              product  offset 0x0000cae00000, size 0x000008000000
[    3.448051@3] meson-mmc: [mmcblk0p20]                 data  offset 0x0000d3600000, size 0x000674600000
[    3.448060@3] card key: card_blk_probe.
[    3.448062@3] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
[    3.448064@3] emmc key: emmc_key_init:205 ok.
[    3.449925@3] meson-mmc: amlmmc_dtb_init: register dtb chardev
[    3.449926@3] meson-mmc: calc f0b8bbc7, store f0b8bbc7
[    3.451675@3] meson-mmc: calc f0b8bbc7, store f0b8bbc7
[    3.451676@3] meson-mmc: total valid 2
[    3.451769@3] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
[    3.451769@3] meson-mmc: Exit aml_emmc_partition_ops OK.
[    3.486109@5] meson-mmc: meson_mmc_probe() : success!
[    3.486237@5] amlogic mtd driver init
[    3.486579@3] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc1
[    3.486906@3] cectx ff80023c.aocec: cec driver date:2019/6/13:early suspend not report pw status
[    3.486906@3]
[    3.487002@4] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
[    3.487003@4] cectx ff80023c.aocec: cecb_ver:0x1
[    3.487005@4] cectx ff80023c.aocec: line_reg:0x1
[    3.487006@4] cectx ff80023c.aocec: line_bit:0x3
[    3.487008@4] cectx ff80023c.aocec: ee_to_ao:0x1
[    3.487077@4] input: cec_input as /devices/virtual/input/input3
[    3.487145@3] cectx ff80023c.aocec: not find 'port_num'
[    3.487147@3] cectx ff80023c.aocec: using cec:1
[    3.487159@3] cectx ff80023c.aocec: no hdmirx regs
[    3.487161@3] cectx ff80023c.aocec: no hhi regs
[    3.487164@3] cectx ff80023c.aocec: not find 'output'
[    3.487169@3] cec: wake up flag:0
[    3.488609@3] cectx ff80023c.aocec: irq cnt:2
[    3.488741@3] cectx ff80023c.aocec: wakeup_reason:0x0
[    3.488797@3] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
[    3.488799@3] cectx ff80023c.aocec: aml_cec_probe success end
[    3.488912@3] unifykey: storage in base: 0xc5000000
[    3.488913@3] unifykey: storage out base: 0xc5040000
[    3.488914@3] unifykey: storage block base: 0xc5080000
[    3.488914@3] unifykey: probe done!
[    3.489066@3] unifykey: no efuse-version set, use default value: -1
[    3.489067@3] unifykey: key unify config unifykey-num is 16
[    3.489100@3] unifykey: key unify fact unifykey-num is 16
[    3.489102@3] unifykey: unifykey_devno: 1ef00000
[    3.489191@4] unifykey: device unifykeys created ok
[    3.489214@4] unifykey: aml_unifykeys_init done!
[    3.489246@4] meson ts init
[    3.489271@4] tsensor id: 0
[    3.489332@4] tsensor trim info: 0xfa00800b!
[    3.489333@4] tsensor hireboot: 0xc0ff2a80
[    3.489365@4] meson ts init
[    3.489374@4] tsensor id: 1
[    3.489413@4] tsensor trim info: 0xfa008002!
[    3.489414@4] tsensor hireboot: 0xc0ff2a80
[    3.489487@4] audio_dsp: [dsp]register dsp to char divece(257)
[    3.489567@3] amaudio: amaudio: driver amaudio init!
[    3.489768@5] amaudio: amaudio_init - amaudio: driver amaudio succuess!
[    3.489992@3] sysled: module init
[    3.490123@3] meson_wdt ffd0f0d0.watchdog: start watchdog
[    3.490125@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[    3.490254@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[    3.490506@5] amlogic rfkill init
[    3.490570@5] enter bt_probe of_node
[    3.490579@5] not get gpio_en
[    3.490585@5] power on valid level is high
[    3.490585@5] bt: power_on_pin_OD = 0;
[    3.490586@5] bt: power_off_flag = 1;
[    3.490587@5] dis power down = 0;
[    3.518180@5] BLASTER Driver Init
[    3.518450@5] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
[    3.518451@5] meson-saradc ff809000.saradc: set ticks per period to <1> by default.
[    3.519407@4] dmc_monitor_probe
[    3.519986@3] aml_atvdemod_init: OK, atv demod version: V2.04.
[    3.520061@3] defendkey ff630218.defendkey: Reserved memory is not enough!
[    3.520067@3] defendkey: probe of ff630218.defendkey failed with error -22
[    3.520221@4] usbcore: registered new interface driver snd-usb-audio
[    3.520711@4] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
[    3.520722@4] T9015 acodec used by auge, tdmout:1
[    3.521940@4] asoc debug: aml_audio_controller_probe-127
[    3.522585@4] asoc-aml-card auge_sound: aml_card_probe, parse error -517
[    3.522587@4] aml_card_probe error ret:-517
[    3.522800@4] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4
[    3.522814@4] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 0, lane_oe_mask_out = 0
[    3.522891@4] aml_tdm_platform_probe(), share en = 1
[    3.522891@4] No channel mask node Channel_Mask
[    3.523013@4] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4
[    3.523050@4] TDM id 1 samesource_sel:3
[    3.523053@4] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 1, lane_oe_mask_out = 0
[    3.523166@4] aml_tdm_platform_probe(), share en = 1
[    3.523167@4] No channel mask node Channel_Mask
[    3.523250@4] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
[    3.523262@4] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = 0, lane_oe_mask_out = 0
[    3.523350@4] aml_tdm_platform_probe(), share en = 1
[    3.523350@4] No channel mask node Channel_Mask
[    3.523850@4] hdmitx: audio: aout notify format CT_PCM
[    3.523851@4] hdmitx: hw: set audio
[    3.523852@4] hdmitx: hw: hdmitx tx_aud_src = 0
[    3.523864@4] hdmitx: fs = 3, cd = 6, tmds_clk = 0
[    3.523865@4] hdmitx: hw: aud_n_para = 6144
[    3.523872@4] hdmitx: hw: set channel status
[    3.523901@4] hdmitx: audio: Audio Type: PCM
[    3.523902@4] hdmitx: audio: set audio param
[    3.523909@4] aml_spdif_platform_probe, register soc platform
[    3.524211@4] audio_ddr_mngr: 0, irqs toddr 41, frddr 44
[    3.524212@4] audio_ddr_mngr: 1, irqs toddr 42, frddr 45
[    3.524213@4] audio_ddr_mngr: 2, irqs toddr 43, frddr 46
[    3.524365@4] loopback ff642000.audiobus:loopback@0: check whether to update loopback chipinfo
[    3.524384@4]        datain_src:4, datain_chnum:4, datain_chumask:f
[    3.524385@4]        datalb_src:1, datalb_chnum:2, datalb_chmask:3
[    3.524386@4]        datain_lane_mask:0x5, datalb_lane_mask:0x1
[    3.524526@4] loopback_platform_probe, p_loopback->id:0 register soc platform
[    3.524693@4] audiolocker_platform_probe
[    3.525358@3] Register vad
[    3.525495@3] GACT probability NOT on
[    3.525501@3] Mirror/redirect action on
[    3.525504@3] u32 classifier
[    3.525505@3]     Actions configured
[    3.525507@3] Netfilter messages via NETLINK v0.30.
[    3.525614@3] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.525729@3] ctnetlink v0.93: registering with nfnetlink.
[    3.526005@4] xt_time: kernel timezone is -0000
[    3.526048@4] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    3.526276@4] IPv4 over IPsec tunneling driver
[    3.539759@4] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.539876@4] arp_tables: arp_tables: (C) 2002 David S. Miller
[    3.551967@4] Initializing XFRM netlink socket
[    3.552154@4] NET: Registered protocol family 10
[    3.552647@3] mip6: Mobile IPv6
[    3.552659@3] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.563461@5] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.563885@5] NET: Registered protocol family 17
[    3.563893@5] NET: Registered protocol family 15
[    3.563904@5] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.563951@4] Bluetooth: RFCOMM TTY layer initialized
[    3.563956@4] Bluetooth: RFCOMM socket layer initialized
[    3.563966@4] Bluetooth: RFCOMM ver 1.11
[    3.563971@4] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.563971@4] Bluetooth: BNEP filters: protocol multicast
[    3.563974@4] Bluetooth: BNEP socket layer initialized
[    3.563976@4] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.563979@4] Bluetooth: HIDP socket layer initialized
[    3.563990@4] l2tp_core: L2TP core driver, V2.0
[    3.563994@4] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    3.563995@4] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    3.564004@4] l2tp_netlink: L2TP netlink interface
[    3.564022@4] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    3.564030@4] l2tp_debugfs: L2TP debugfs support
[    3.564031@4] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    3.564045@4] NET: Registered protocol family 35
[    3.564070@4] Key type dns_resolver registered
[    3.564985@4] Registering SWP/SWPB emulation handler
[    3.565254@4] registered taskstats version 1
[    3.774205@4] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
[    3.774208@4] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16
[    3.774210@4] aml_dai_tdm_probe, failed add snd tdm controls
[    3.774213@4] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
[    3.774215@4] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16
[    3.774215@4] aml_dai_tdm_probe, failed add snd tdm controls
[    3.774217@4] aml_dai_spdif_probe
[    3.774237@4] master_mode(1), binv(1), finv(0) out_skew(2), in_skew(3)
[    3.774633@4] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok
[    3.774663@4] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[    3.774965@4] asoc-aml-card auge_sound: multicodec <-> TDM-B mapping ok
[    3.774976@4] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[    3.775273@4] asoc-aml-card auge_sound: multicodec <-> TDM-C mapping ok
[    3.775587@4] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
[    3.775589@4]
[    3.775589@4] loopback_dai_set_sysclk, 0, 12288000, 0
[    3.775590@4] asoc loopback_dai_set_fmt, 0x4010, edb38010
[    3.775873@4] asoc-aml-card auge_sound: dummy <-> ff642000.audiobus:loopback@0 mapping ok
[    3.776667@4] snd_card_add_kcontrols card:ec760c10
[    3.776672@4] effect_v2 is not init
[    3.776674@4] Failed to add VAD controls
[    3.776682@4] eq/drc v1 function enable
[    3.802446@4] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[    3.805053@4] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.805062@4] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    3.805257@4] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
[    3.805278@4] xhci-hcd xhci-hcd.0.auto: irq 30, io mem 0xff500000
[    3.805581@3] hub 1-0:1.0: USB hub found
[    3.805596@3] hub 1-0:1.0: 2 ports detected
[    3.805763@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.805768@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    3.805798@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.806051@4] hub 2-0:1.0: USB hub found
[    3.806063@4] hub 2-0:1.0: 1 port detected
[    3.806401@4] i2c i2c-4: sensor_probe: kxtj3,edbe7600
[    3.806869@4] sensors 4-000e: sensor_chip_init:kxtj3:devid=0x35,ops=0xc17690dc
[    3.808344@4] input: gsensor as /devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-000e/input/input4
[    3.809176@4] sensors 4-000e: sensor_irq_init:use polling,delay=30 ms
[    3.809233@3] sensors 4-000e: sensor_misc_device_register:miscdevice: accel
[    3.809235@3] sensors 4-000e: sensor_probe:initialized ok,sensor name:kxtj3,type:2,id=0
[    3.809235@3]
[    3.812476@5] khadas-rtc 4-0051: setting system clock to 2011-01-01 12:06:21 UTC (1293883581)
[    3.812670@5] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[    3.912812@3] dwc_otg: Core Release: 3.30a
[    3.912814@3] dwc_otg: Setting default values for core params
[    3.912821@3] dwc_otg: curmode: 0, host_only: 0
[    3.924974@3] dwc_otg: Using Buffer DMA mode
[    3.924976@3] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.924977@3] dwc_otg: Working on port type = SLAVE
[    3.924980@3] dwc_otg: Dedicated Tx FIFOs mode
[    3.925534@3] input: adc_keypad as /devices/platform/adc_keypad/input/input5
[    3.925767@4] lcd extern: key_valid: 0
[    3.925768@4] lcd extern: lcd_extern_get_config from dts
[    3.925772@4] lcd extern: lcd_extern_get_config_dts: invalid index
[    3.925788@4] lcd extern: aml_lcd_extern_probe ok
[    3.926016@4] bl: chip type/name: (6-g12b)
[    3.926017@4] bl: key_valid: 0
[    3.926018@4] bl: aml_bl_config_load from dts
[    3.926020@4] bl: load: backlight_0
[    3.926025@4] bl: bl pwm_port: PWM_F(5)
[    3.926028@4] bl: name              = backlight_pwm
[    3.926029@4] bl: method            = pwm(1)
[    3.926063@4] bl: register pwm_ch(5) 0xedba0c30
[    3.926064@4] bl: aml_bl_pwm_channel_register ok
[    3.926292@3] bl: probe OK
[    3.926620@3] meson_cdev probe
[    3.926648@3] meson_cdev index: 0
[    3.926703@3] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[    3.926719@3] meson_cdev index: 1
[    3.926785@3] meson_cdev index: 2
[    3.926787@3] cpucore_cooling_register, max_cpu_core_num:6
[    3.926842@3] meson_cdev index: 3
[    3.926843@3] cpucore_cooling_register, max_cpu_core_num:6
[    3.926899@3] meson_cdev index: 4
[    3.926910@3] meson_cdev index: 5
[    3.926931@3] find tzd id: 0
[    3.926979@3] cpufreq_cooling_get_level: cpu:8 not part of any cooling device
[    3.927001@3] find tzd id: 0
[    3.927055@3] find tzd id: 0
[    3.927077@3] meson_cdev probe done
[    3.927141@3] gxbb_pm: enter meson_pm_probe!
[    3.927157@3] gxbb_pm: meson_pm_probe done
[    3.927346@3] ALSA device list:
[    3.927347@3]   #0: AML-AUGESOUND
[    4.130107@3] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    4.285901@3] hub 1-1:1.0:[    5.504117@3] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    5.614119@0] prepare_namespace() wait 79
[    5.614181@0] md: Waiting for all devices to be available before autodetect
[    5.619467@0] md: If you don't use raid, use raid=noautodetect
[    5.625939@0] md: Autodetecting RAID arrays.
[    5.629527@0] md: Scanned 0 and added 0 devices.
[    5.634178@0] md: autorun ...
[    5.637012@0] md: ... autorun DONE.
[    5.641095@0] EXT4-fs (mmcblk0p18): couldn't mount as ext3 due to feature incompatibilities
[    5.649289@3] EXT4-fs (mmcblk0p18): couldn't mount as ext2 due to feature incompatibilities
[    5.659529@1] EXT4-fs (mmcblk0p18): mounted filesystem without journal. Opts: (null)
[    5.664879@1] VFS: Mounted root (ext4 filesystem) readonly on device 179:18.
[    5.672250@1] devtmpfs: mounted
[    5.675811@1] Freeing unused kernel memory: 1024K
[    5.696797@0] init: init first stage started!
[    5.697582@0] init: Using Android DT directory /proc/device-tree/firmware/android/
[    5.706392@4] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
[    5.735224@0] EXT4-fs (mmcblk0p17): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[    5.739704@0] init: [libfs_mgr]__mount(source=/dev/block/odm,target=/odm,type=ext4)=0: Success
[    5.749776@0] EXT4-fs (mmcblk0p19): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[    5.758251@2] init: [libfs_mgr]__mount(source=/dev/block/product,target=/product,type=ext4)=0: Success
[    5.769247@0] EXT4-fs (mmcblk0p16): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[    5.777512@0] init: [libfs_mgr]__mount(source=/dev/block/vendor,target=/vendor,type=ext4)=0: Success
[    5.786801@0] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
[    5.793760@0] init: Loading SELinux policy
[    5.911662@4] audit: type=1403 audit(1293883583.596:2): policy loaded auid=4294967295 ses=4294967295
[    5.915271@4] selinux: SELinux: Loaded policy from /odm/etc/selinux/precompiled_sepolicy
[    5.915271@4]
[    5.931999@0] selinux: SELinux: Loaded file_contexts
[    5.931999@0]
[    5.935465@3] init: init second stage started!
[    5.960392@0] init: Using Android DT directory /proc/device-tree/firmware/android/
[    5.965039@4] selinux: SELinux: Loaded file_contexts
[    5.965039@4]
[    5.968944@4] init: Running restorecon...
[    5.976272@4] init: waitid failed: No child processes
[    5.980056@3] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
[    5.991798@3] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
[    5.998995@3] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 2564
[    6.005901@3] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 2565
[    6.012778@3] init: Parsing file /init.rc...
[    6.107804@5] ueventd: ueventd started!
[    6.109816@5] selinux: SELinux: Loaded file_contexts
[    6.109816@5]
[    6.112728@5] ueventd: Parsing file /ueventd.rc...
[    6.119516@3] mali_kbase: loading out-of-tree module taints kernel.
[    6.123668@3] ueventd: Parsing file /vendor/ueventd.rc...
[    6.129704@0] ueventd: /vendor/ueventd.rc: 109: /sys/ lines must have 5 entries
[    6.131356@3] mali ffe40000.bifrost: Continuing without Mali regulator control
[    6.131407@3] mali ffe40000.bifrost: max pp is 2
[    6.131409@3] mali ffe40000.bifrost: set min pp to default 1
[    6.131410@3] mali ffe40000.bifrost: min pp is 1
[    6.131412@3] mali ffe40000.bifrost: set min clk default to 0
[    6.131413@3] mali ffe40000.bifrost: min clk  is 0
[    6.131422@3] mali ffe40000.bifrost: hiu io source  0xf14f1000
[    6.131426@3] mali ffe40000.bifrost: hiu io source  0xf14f3000
[    6.131428@3] mali ffe40000.bifrost: num of pp used most of time 1
[    6.131429@3] mali ffe40000.bifrost: clock dvfs cfg table size is 6
[    6.131443@3] mali ffe40000.bifrost: max clk set 4
[    6.131444@3] mali ffe40000.bifrost: max clk  is 4
[    6.131446@3] mali ffe40000.bifrost: turbo clk set to 5
[    6.131447@3] mali ffe40000.bifrost: turbo clk  is 5
[    6.131449@3] mali ffe40000.bifrost: default clk set to 4
[    6.131450@3] mali ffe40000.bifrost: default clk  is 4
[    6.131453@3] mali ffe40000.bifrost: ====================0====================
[    6.131453@3] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
[    6.131455@3] mali ffe40000.bifrost: ====================1====================
[    6.131455@3] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
[    6.131457@3] mali ffe40000.bifrost: ====================2====================
[    6.131457@3] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
[    6.131460@3] mali ffe40000.bifrost: ====================3====================
[    6.131460@3] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
[    6.131462@3] mali ffe40000.bifrost: ====================4====================
[    6.131462@3] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    6.131464@3] mali ffe40000.bifrost: ====================5====================
[    6.131464@3] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    6.131465@3] mali ffe40000.bifrost: clock dvfs table size is 6
[    6.131523@3] mali_plat=bf05d2d8
[    6.131693@3] find tzd id: 0
[    6.131721@3] gpu cooling register okay with err=0
[    6.131815@3] find tzd id: 0
[    6.131822@3] gpu core cooling register okay with err=0
[    6.131840@3] shader_present=3, tiler_present=1, l2_present=1
[    6.131924@3] Mali_pwr_on:gpu_irq : 200
[    6.132158@2] hrtimer: interrupt took 41342305588872 ns
[    6.132283@2] mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0
[    6.132731@2] mali ffe40000.bifrost: Using coherency mode 0 set from dtb
[    6.136772@2] mali ffe40000.bifrost: Probed as mali0
[    6.153995@4] PPMGRVPP: info: RegisterTB_Function: gfunc   (null), func: bf08e024, ver:TB detect: v2016.11.15a *** [ Tue Mar 19 19:21:39 CST 2019]-[ renjiang.han]-[* master]-[67f03d41e0612a58d1edd96db9bc8b92de1a59b1]-[Date: Wed Jul 4 00:44:57 2018 +0800]-[2]
[    6.412587@2] ueventd: Parsing file /odm/ueventd.rc...
[    6.417607@2] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[    6.427541@2] ueventd: Parsing file /ueventd.amlogic.rc...
[    6.432943@2] ueventd: Unable to read config file '/ueventd.amlogic.rc': open() failed: No such file or directory
[    6.657215@3] ueventd: Coldboot took 0.212 seconds
[    6.673329@0] audit: type=1400 audit(1293883584.356:3): avc:  denied  { write } for  pid=1 comm="init" name="alignment" dev="proc" ino=4026531980 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
[    6.687296@0] audit: type=1400 audit(1293883584.372:4): avc:  denied  { open } for  pid=1 comm="init" path="/proc/cpu/alignment" dev="proc" ino=4026531980 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
[    6.730010@2] audit: type=1400 audit(1293883584.412:5): avc:  denied  { write } for  pid=2564 comm="init" name="watermark_scale_factor" dev="proc" ino=4273 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_vm_writable:s0 tclass=file permissive=1
[    6.763859@1] EXT4-fs (mmcblk0p20): Ignoring removed nomblk_io_submit option
[    7.124734@4] EXT4-fs (mmcblk0p20): 5 orphan inodes deleted
[    7.124762@4] EXT4-fs (mmcblk0p20): recovery complete
[    7.133836@4] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    7.205536@3] audit: type=1400 audit(1293883584.888:6): avc:  denied  { read } for  pid=3132 comm="imageserver" name="vndbinder" dev="tmpfs" ino=1144 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
[    7.221789@3] audit: type=1400 audit(1293883584.904:7): avc:  denied  { write } for  pid=3132 comm="imageserver" name="vndbinder" dev="tmpfs" ino=1144 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
[    7.243570@3] audit: type=1400 audit(1293883584.928:8): avc:  denied  { open } for  pid=3132 comm="imageserver" path="/dev/vndbinder" dev="tmpfs" ino=1144 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
[    7.265958@3] audit: type=1400 audit(1293883584.948:9): avc:  denied  { ioctl } for  pid=3132 comm="imageserver" path="/dev/vndbinder" dev="tmpfs" ino=1144 ioctlcmd=0x6209 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
[    7.660393@4] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
[    7.660393@4]
[    7.661125@4] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[    7.661125@4]
[    7.668777@4] e2fsck: Pass 2: Checking directory structure
[    7.668777@4]
[    7.675857@4] e2fsck: Pass 3: Checking directory connectivity
[    7.675857@4]
[    7.683252@4] e2fsck: Pass 4: Checking reference counts
[    7.683252@4]
[    7.690085@4] e2fsck: Pass 5: Checking group summary information
[    7.690085@4]
[    7.697703@4] e2fsck: /dev/block/data: 5696/1692432 files (10.0% non-contiguous), 344264/6768128 blocks
[    7.697703@4]
[    7.709779@3] EXT4-fs (mmcblk0p20): Ignoring removed nomblk_io_submit option
[    7.719830@3] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    7.728040@3] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[    7.737017@0] EXT4-fs (mmcblk0p3): recovery complete
[    7.739396@3] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    7.797082@5] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
[    7.797082@5]
[    7.797808@5] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[    7.797808@5]
[    7.805439@5] e2fsck: Pass 2: Checking directory structure
[    7.805439@5]
[    7.813206@3] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[    7.824959@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    7.832106@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[    7.841220@0] EXT4-fs (mmcblk0p13): recovery complete
[    7.843135@0] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    7.894749@3] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[    7.901646@3] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    7.935216@0] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
[    7.942641@0] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    7.972908@0] EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option
[    7.980038@0] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    7.986475@0] init: 27 output lines suppressed due to ratelimiting
[    7.999952@3] No find node.
[    7.999973@3] register clk_set_setting cpu[46]
[    8.007460@4] Registered firmware driver success.
[    8.008334@4] Try to load video/h264_enc.bin  ...
[    8.012902@0] load firmware size : 76288, Name : video/h264_enc.bin.
[    8.017667@0] the fw pack ver v0.0 is too lower.
[    8.022184@0] it may work abnormally so need to be update in time.
[    8.028825@0] Try to load video/video_ucode.bin  ...
[    8.048863@3] load firmware size : 1706240, Name : video/video_ucode.bin.
[    8.050184@3] the fw pack ver v0.2 is too lower.
[    8.054602@3] it may work abnormally so need to be update in time.
[    8.092620@3] Amlogic A/V streaming port init
[    8.095005@2] get gate demux control ok ec1fc100
[    8.095937@2] get gate parser_top control ok ec1fc600
[    8.101026@2] get gate vdec control ok ec1fcc40
[    8.105474@2] get gate clk_81 control failed   (null)
[    8.110531@2] get gate clk_vdec_mux control ok ec1fc0c0
[    8.115731@2] get gate clk_hcodec_mux control ok ec1fc080
[    8.121104@2] get gate clk_hevc_mux control ok ec1fc2c0
[    8.126306@2] get gate clk_hevcb_mux control ok ec1fc6c0
[    8.131572@2] get gate ahbarb0 control ok ec1fc1c0
[    8.136324@2] get gate asyncfifo control failed   (null)
[    8.160148@5] ammvdec_h264 module init
[    8.183914@3] ammvdec_mpeg12 module init
[    8.190813@3] ammvdec_mpeg4_driver_init_module
[    8.215338@2] amvenc_avc_probe -- reserved memory config fail.
[    8.215530@2] amvenc_avc - cma memory pool size: 60 MB
[    8.220670@2] encode_wq_init.
[    8.223606@2] encode start monitor.
[    8.227198@2] encode workqueue monitor start.
[    8.231143@3] vpu_init
[    8.231272@3] vpu_probe
[    8.231275@3] HevcEnc reserved memory config fail.
[    8.231276@3] HevcEnc - cma memory pool size: 64 MB
[    8.231293@3] HevcEnc - wave420l_irq: 65
[    8.231336@3] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xf2568000
[    8.231677@0] success to probe vpu device with video memory from cma
[    8.251466@0] audit: type=1400 audit(1293883585.936:10): avc:  denied  { setattr } for  pid=1 comm="init" name="slabinfo" dev="proc" ino=4026532027 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
[    8.280986@4] logd.auditd: start
[    8.280994@4] logd.klogd: 8014899461
[    8.367281@3] type=1400 audit(1293883586.052:11): avc: denied { setattr } for pid=2564 comm="init" name="droidota" dev="mmcblk0p20" ino=1438982 scontext=u:r:vendor_init:s0 tcontext=u:object_r:update_data_file:s0 tclass=dir permissive=1
[    8.382637@3] type=1400 audit(1293883586.052:11): avc: denied { setattr } for pid=2564 comm="init" name="droidota" dev="mmcblk0p20" ino=1438982 scontext=u:r:vendor_init:s0 tcontext=u:object_r:update_data_file:s0 tclass=dir permissive=1
[    8.403418@3] type=1400 audit(1293883586.052:12): avc: denied { setattr } for pid=2564 comm="init" name="log" dev="mmcblk0p20" ino=523269 scontext=u:r:vendor_init:s0 tcontext=u:object_r:log_file:s0 tclass=dir permissive=1
[    8.423568@0] type=1400 audit(1293883586.052:12): avc: denied { setattr } for pid=2564 comm="init" name="log" dev="mmcblk0p20" ino=523269 scontext=u:r:vendor_init:s0 tcontext=u:object_r:log_file:s0 tclass=dir permissive=1
[    8.442559@0] type=1400 audit(1293883586.112:13): avc: denied { setattr } for pid=2564 comm="init" name="media" dev="mmcblk0p20" ino=392452 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
[    8.500534@0] reg resource 2, start: -10239732,end: -10239729
[    8.500639@0] reg resource 3, start: -10239728,end: -10239725
[    8.506546@0] reg resource 4, start: -3141496,end: -3141493
[    8.512021@0] galcore irq number is 52.
[    8.515788@0] Galcore version 6.3.3.210826
[    8.519903@0] Galcore options:
[    8.522882@0]   irqLine           = 52
[    8.526571@0]   registerMemBase   = 0xFF100000
[    8.530987@0]   registerMemSize   = 0x00000800
[    8.535466@0]   contiguousSize    = 0x00400000
[    8.539835@0]   contiguousBase    = 0x00000000
[    8.544243@0]   externalSize      = 0x00000000
[    8.548689@4]   externalBase      = 0x00000000
[    8.553098@4]   bankSize          = 0x00000000
[    8.557528@4]   fastClear         = -1
[    8.561225@4]   compression       = 15
[    8.564946@4]   powerManagement   = 1
[    8.568611@4]   baseAddress       = 0x00000000
[    8.573009@4]   physSize          = 0x00000000
[    8.577436@4]   recovery          = 1
[    8.581076@4]   stuckDump         = 0
[    8.584718@4]   gpuProfiler       = 0
[    8.588363@4]   userClusterMask   = 0x0
[    8.592165@4]   smallBatch        = 1
[    8.595798@4]   irqs              = 52, -1, -1, -1, -1, -1, -1, -1, -1, -1,
[    8.602814@4]   registerBases     = 0xFF100000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[    8.616767@4]   registerSizes     = 0x00000800, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[    8.630720@4]   chipIDs           = 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
[    8.644674@4]   core 0 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFF000000, 0xFFFFFFFFFFFFFFFF,
[    8.652647@4]   core 1 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.661314@4]   core 2 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.669980@4]   core 3 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.678647@4]   core 4 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.687314@4]   core 5 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.695980@4]   core 6 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.704647@4]   core 7 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.713314@4]   core 8 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.721980@4]   core 9 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.730647@4] Build options:
[    8.733507@4]   gcdGPU_TIMEOUT    = 20000
[    8.737508@4]   gcdGPU_2D_TIMEOUT = 4000
[    8.741410@4]   gcdINTERRUPT_STATISTIC = 1
[    8.747219@2] Galcore ContiguousBase=0x2a400000 ContiguousSize=0x400000
[    8.752064@2] _setpower,control status:1
[    8.755965@2] ====>>>>poweron in _SetPower
[    8.764273@0] Galcore Info: MMU mapped core 0 SRAM[1] base=0xff000000 size=0x100000
[    8.767732@0] Galcore Info: MMU mapped core 0 SRAM[1] hardware address=0xff000000 size=0x100000
[    8.781935@0] _setpower,control status:0
[    8.781953@0] ====>>>>poweroff in _SetPower
[    8.793810@3] iq name from dts config is ----> imx290
[    8.895732@3] arm_isp ff140000.isp: assigned reserved memory node linux,isp_cma
[    8.897414@3] AM_SC: am_sc_parse_dt: rs idx info: name: isp_sc
[    8.903311@3] AM_SC: am_sc_parse_dt:rs info: irq: 73
[    8.932483@1] logd.daemon: reinit
[    9.083660@4] healthd: BatteryTemperaturePath not found
[    9.083694@4] healthd: BatteryCycleCountPath not found
[    9.113357@0] android.hardware.health@2.0-impl: wakealarm_init: timerfd_create failed
[    9.118543@0] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
[    9.146183@2] unifykey: amlkey_init_gen() enter!
[    9.152965@5] hdmitx: system: set hdcp_pwr 1
[    9.189944@5] type=1400 audit(1293883586.112:13): avc: denied { setattr } for pid=2564 comm="init" name="media" dev="mmcblk0p20" ino=392452 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
[    9.205095@5] type=1400 audit(1293883586.872:14): avc: denied { read } for pid=3352 comm="android.hardwar" name="u:object_r:default_prop:s0" dev="tmpfs" ino=373 scontext=u:r:hal_neuralnetworks_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1
[    9.235651@4] emmc_key_read:114, read ok
[    9.235683@4] unifykey: amlkey_init_gen() storagekey_info.buffer=c5080000, storagekey_info.size = 40000!
[    9.242342@2] fb: osd_open, 1497, fb_index=0,fb_rmem_size=26738688
[    9.242413@2] fb: osd_open, 1497, fb_index=1,fb_rmem_size=1048576
[    9.242429@2] fb: osd_open, 1497, fb_index=2,fb_rmem_size=1048576
[    9.242515@2] fb: vpu clkc clock is 199 MHZ
[    9.242524@2] fb: osd_open, 1497, fb_index=3,fb_rmem_size=8388608
[    9.275398@2] vfm_map_store:rm default
[    9.275746@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    9.286428@5] file system registered
[    9.290588@0] assign_ffs_buffer FFS_BUFFER_MAX=100!!!
[    9.292685@5] hdmitx: system: restore hdcp_pwr 0
[    9.301028@1] hdmitx: system: sname = 1080p60hz
[    9.301061@1] hdmitx: system: char_clk = 148500
[    9.304634@1] hdmitx: system: cd = 6
[    9.308188@1] hdmitx: system: cs = 2
[    9.311704@1] hdmitx: RX tmds clk: 225   Calc clk: 222
console:/ $ [    9.356882@3] vout: vout_io_open
[    9.409870@0] read descriptors
[    9.409909@0] read strings
[    9.532128@3] [DI] load 0x3e00 pq table len 426 later.
[    9.579906@1] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
[    9.587983@1] audit: rate limit exceeded
[    9.840512@3] avc open
[    9.840533@3] amvenc_avc  check CMA pool success, max instance: 3.
[    9.844763@3] allocating phys 0xcfc00000, size 20480k, wq:e9026400.
[    9.849757@3] amvenc_avc  memory config success, buff start:0xcfc00000, size is 0x1400000, wq:e9026400.
[    9.859170@3] avc release, wq:e9026400
[    9.862905@3] remove  encode_work_queue e9026400 success, _destroy_encode_work_queue line 3513.
[    9.871645@3] [+] vpu_open
[    9.875249@5] allocating phys 0xcfc00000, virt addr 0x0, size 65536k
[    9.880687@5] [-] vpu_open, ret: 0
[    9.883882@5] vpu_release
[    9.884493@2] vout: vout_io_open
[    9.884498@2] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
[    9.884501@2] vout: vout_io_release
[    9.889266@3] aml_spdif_open
[    9.889635@3] aml_spdif_close
[    9.890179@2] aml_tdm_open
[    9.890657@2] aml_tdm_open
[    9.891036@4] aml_tdm_open
[    9.891363@4] loopback_dai_startup
[    9.891535@2] loopback_dai_shutdown
[    9.919349@5] vpu_free_buffers
[    9.922371@5] vpu_free_instances
[    9.925564@5] vpu_release, s_video_memory 0xcfc00000
[   10.130883@5] cectx ff80023c.aocec: init_cec_port_info phy_addr:1000, port num:1
[   10.132699@5] cectx ff80023c.aocec: port_seq=0x0
[   10.137587@5] cectx ff80023c.aocec: portinfo id:0 arc:0 phy:1100,type:0
[   11.054862@3] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3348_3)
[   11.055398@3] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:3348_3)
[   11.069184@3] fb: free_scale_switch to fb0, mode: 0x10001
[   11.069235@3] fb: set logo loaded
[   11.176874@3] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
[   11.945804@2] early_suspend_state=0
[   12.358131@0] vout: aml_tvout_mode_work: monitor_timeout
[   12.610884@2] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
[   12.613020@5] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
[   12.634508@4] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
[   13.187488@5] cectx ff80023c.aocec: init_cec_port_info phy_addr:1000, port num:1
[   13.189235@5] cectx ff80023c.aocec: port_seq=0x0
[   13.193849@5] cectx ff80023c.aocec: portinfo id:0 arc:0 phy:1100,type:0
[   13.366659@5] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[   13.368110@5] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.481950@3] sdcardfs version 2.0
[   13.481975@3] sdcardfs: dev_name -> /data/media
[   13.484557@3] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
[   13.494863@3] sdcardfs: mnt -> ebb7bc10
[   13.498788@3] sdcardfs: mounted on top of /data/media type ext4
[   13.505241@3] Remount options were mask=23,gid=9997 for vfsmnt e9066410.
[   13.511317@3] sdcardfs : options - debug:1
[   13.515600@3] sdcardfs : options - gid:9997
[   13.519488@3] sdcardfs : options - mask:23
[   13.524058@3] Remount options were mask=7,gid=9997 for vfsmnt e9066a10.
[   13.530258@3] sdcardfs : options - debug:1
[   13.534210@3] sdcardfs : options - gid:9997
[   13.538373@3] sdcardfs : options - mask:7
[   13.858445@0] aml_wifi wifi: [usb_power_control] Set WiFi power down
[   14.065805@5] aml_wifi wifi: [usb_power_control] Set WiFi power on !
[   14.067780@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   14.073116@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   14.080563@0] meson-mmc: sdio: resp_timeout,vstat:0x9dff0800,virqc:3fff
[   14.086114@0] meson-mmc: sdio: err: wait for desc write back, bus_fsm:0x7
[   14.101749@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
[   14.102721@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   14.112499@5] meson-mmc: actual_clock :0, HHI_nand: 0x80
[   14.114727@5] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   14.124476@3] BT_RADIO going: on
[   14.124645@3] AML_BT: going ON
[   14.142231@5] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[   14.142335@5] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   14.169438@5] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   14.172513@5] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   14.178222@5] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   14.186822@5] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[   14.193060@5] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
[   14.195765@2] type=1400 audit(1293883590.448:34): avc: denied { getattr } for pid=3575 comm="android.ui" path="/sys/devices/virtual/amhdmitx/amhdmitx0/hdmi/state" dev="sysfs" ino=10155 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs_amhdmitx:s0 tclass=file permissive=1
[   14.217873@2] type=1400 audit(1293883591.880:35): avc: denied { dac_override } for pid=3411 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=1
[   14.307705@5] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[   14.312033@5] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[   14.317865@5] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[   14.324873@5] meson-mmc: Data 1 aligned delay is 0
[   14.329623@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.336941@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.341607@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.348937@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.352190@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.358180@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.360965@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 0, window start 0, size 5
[   14.368964@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.376459@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.382324@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.386364@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.396752@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.399681@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.401543@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 1, window start 0, size 5
[   14.409633@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.419203@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.423798@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.429906@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.433430@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.443099@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.443129@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 2, window start 0, size 5
[   14.450769@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.458749@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.463718@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.474483@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.480024@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.482969@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.484809@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 3, window start 0, size 5
[   14.493125@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.501281@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.507293@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.513415@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.520504@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.524671@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.525290@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 4, window start 0, size 5
[   14.533418@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.541307@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.542548@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[   14.542620@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600
[   14.542645@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[   14.550024@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
[   14.578780@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.589878@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.594391@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.596601@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.599913@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 5, window start 0, size 5
[   14.607952@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.618853@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.621941@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.627366@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.630835@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.640976@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.641069@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 6, window start 0, size 5
[   14.648625@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.655788@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.666128@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.668376@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.676023@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.678280@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.681460@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 7, window start 0, size 5
[   14.689458@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.696028@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.706340@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.710326@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.714512@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.718316@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.721739@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 8, window start 0, size 5
[   14.729663@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.737281@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.745112@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.747943@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.751955@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.759074@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.760975@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 9, window start 0, size 5
[   14.768979@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.776668@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.782318@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.786291@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.791891@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.800131@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.800317@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 10, window start 0, size 5
[   14.808450@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.816223@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.820522@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   14.826126@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.830845@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.838735@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.839756@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 11, window start 0, size 5
[   14.847849@5] meson-mmc: sdio: clk 199999997 tuning start
[   14.857726@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   14.858621@5] meson-mmc: Tuning transfer error: nmatch=4 tuning_err:0xffffffac
[   14.870203@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   14.875379@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   14.881401@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   14.881437@5] meson-mmc: sdio: best_win_start =2, best_win_size =4
[   14.887404@5] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x42000
[   14.906029@5] sdio: new ultra high speed SDR104 SDIO card at address 0001
[   14.907202@5] sdio: clock 199999997, 4-bit-bus-width
 [   14.912710@0] meson-mmc: [sdio_reinit] finish
[   14.916658@0] aml_wifi wifi: [usb_power_control] Set WiFi power on !
[   15.047755@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 2000000 to 115200
[   15.123784@5] aml_wifi wifi: [pci_reinit] pci wifi reinit!
[   15.123816@5] aml_wifi wifi: [wifi_power_ioctl] Set sdio wifi power up!
[   15.130311@5] aml_wifi wifi: [wifi_power_ioctl] wifi interface dev type: sdio, length = 4
[   15.161829@2] dhd_module_init: in Dongle Host Driver, version 100.10.315.3 (r771911)
[   15.164091@2] ======== dhd_wlan_init_plat_data ========
[   15.169207@2] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=85, oob_irq_flags=0x418
[   15.176800@2] dhd_wlan_init_gpio: WL_REG_ON=-1
[   15.181157@2] dhd_wifi_platform_load: Enter
[   15.185877@2] Power-up adapter 'DHD generic adapter'
[   15.190277@2] wifi_platform_set_power = 1
[   15.194312@2] ======== PULL WL_REG_ON(-1) HIGH! ========
[   15.200002@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 482
[   15.256271@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
[   15.409058@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 482
[   15.918176@1] wifi_platform_bus_enumerate device present 1
[   15.918225@1] ======== Card detection to detect SDIO card! ========
[   15.924419@2] sdio_reset_comm():
[   15.927574@2] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[   15.938120@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[   15.943240@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[   15.952492@2] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[   15.960871@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[   15.965998@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[   15.974045@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[   15.979384@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   15.988706@4] meson-mmc: actual_clock :0, HHI_nand: 0x80
[   15.990946@4] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   16.018158@4] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[   16.018261@4] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   16.044552@1] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[   16.047361@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   16.053230@5] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[   16.061278@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[   16.067725@5] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
[   16.166321@5] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[   16.171019@5] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[   16.176745@5] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[   16.183534@5] meson-mmc: Data 1 aligned delay is 0
[   16.188227@5] meson-mmc: sdio: clk 199999997 tuning start
[   16.195106@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.201257@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.207091@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.211778@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.216183@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.219702@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 0, window start 0, size 5
[   16.228149@2] meson-mmc: sdio: clk 199999997 tuning start
[   16.235033@3] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.240190@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.245536@2] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.250150@3] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.256087@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.259292@2] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 1, window start 0, size 5
[   16.266982@2] meson-mmc: sdio: clk 199999997 tuning start
[   16.273972@4] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.279182@4] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.284710@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.290187@2] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.295685@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.298266@2] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 2, window start 0, size 5
[   16.306370@2] meson-mmc: sdio: clk 199999997 tuning start
[   16.313392@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.319310@2] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.323837@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.330111@4] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.334606@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.337602@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 3, window start 0, size 5
[   16.345794@5] meson-mmc: sdio: clk 199999997 tuning start
[   16.352802@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.358385@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.362924@4] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.368038@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.373616@4] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.377184@4] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 4, window start 0, size 5
[   16.384989@4] meson-mmc: sdio: clk 199999997 tuning start
[   16.392366@4] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.397179@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.402436@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.408191@1] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.413969@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.416386@4] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 5, window start 0, size 5
[   16.424358@4] meson-mmc: sdio: clk 199999997 tuning start
[   16.432087@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.437619@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.442779@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.447502@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.453775@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.455685@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 6, window start 0, size 5
[   16.463795@5] meson-mmc: sdio: clk 199999997 tuning start
[   16.471329@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.476791@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.481071@1] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.486847@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.493463@1] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.495048@4] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 7, window start 0, size 5
[   16.503037@4] meson-mmc: sdio: clk 199999997 tuning start
[   16.510477@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.515471@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.520819@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.525893@3] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.530832@1] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.534381@3] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 8, window start 0, size 5
[   16.542567@3] meson-mmc: sdio: clk 199999997 tuning start
[   16.549259@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.555100@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.560546@1] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.564851@4] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.570387@1] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.573722@1] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 9, window start 0, size 5
[   16.581744@2] meson-mmc: sdio: clk 199999997 tuning start
[   16.588997@4] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.594305@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.598966@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.604444@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.609441@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.613114@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 10, window start 0, size 5
[   16.621194@5] meson-mmc: sdio: clk 199999997 tuning start
[   16.628080@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.633384@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.638967@4] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.643682@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.649182@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.652795@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 11, window start 0, size 5
[   16.660558@5] meson-mmc: sdio: clk 199999997 tuning start
[   16.667836@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.672990@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   16.678427@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.684481@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.688828@3] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.692212@3] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 12, window start 0, size 5
[   16.700257@3] meson-mmc: sdio: clk 199999997 tuning start
[   16.706829@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   16.710941@0] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[   16.720110@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   16.726180@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   16.729529@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   16.733327@5] meson-mmc: sdio: best_win_start =2, best_win_size =4
[   16.739595@5] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x42000
[   16.747928@5] meson-mmc: [sdio_reinit] finish
[   16.769689@0] bcmsdh_sdmmc_probe: Enter num=1
[   16.769865@0] bcmsdh_sdmmc_probe: Enter num=2
[   16.772924@2] bus num (host idx)=2, slot num (rca)=1
[   16.777778@2] found adapter info 'DHD generic adapter'
[   16.782898@2] Wifi: bcmdhd_mem_prealloc: sectoin 3, size 139264
[   16.788802@2] succeed to alloc static buf
[   16.792771@2] Wifi: bcmdhd_mem_prealloc: sectoin 4, size 0
[   16.798338@5] sdioh_attach: set sd_f2_blocksize 256
[   16.803498@5] sdioh_attach: sd clock rate = 0
[   16.808173@5] dhdsdio_probe : no mutex held. set lock
[   16.812791@0] F1 signature read @0x18000000=0x17294359
[   16.826631@4] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
[   16.828829@5] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
[   16.834740@5] Wifi: bcmdhd_mem_prealloc: sectoin 7, size 24928
[   16.840512@5] dhd_conf_set_chiprev: chip=0x4359, chiprev=9
[   16.845951@5] Wifi: bcmdhd_mem_prealloc: sectoin 0, size 10320
[   16.852178@5] Wifi: bcmdhd_mem_prealloc: sectoin 5, size 65536
[   16.857999@5] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   16.865405@5] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   16.873278@5] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   16.881163@5] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   16.889050@5] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   16.896937@5] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   16.904823@5] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   16.912710@5] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   16.920596@5] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   16.928487@5] wl_escan_attach: Enter
[   16.932054@5] Wifi: bcmdhd_mem_prealloc: sectoin 19, size 67244
[   16.937963@5] wl_escan_init: Enter
[   16.941457@4] wl_create_event_handler(): thread:wl_escan_handler:1017 started
[   16.941460@5] tsk Enter, tsk = 0xecb50160
[   16.952419@4] Wifi: bcmdhd_mem_prealloc: sectoin 20, size 262144
[   16.958480@4] Wifi: bcmdhd_mem_prealloc: sectoin 22, size 65536
[   16.964400@5] dhd_attach(): thread:dhd_watchdog_thread:1018 started
[   16.970661@4] dhd_attach(): thread:dhd_dpc:1019 started
[   16.975907@0] dhd_attach(): thread:dhd_rxf:101a started
[   16.981090@5] dhd_deferred_work_init: work queue initialized
[   16.986604@5] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[   16.993274@5] dhd_get_memdump_info: MEMDUMP ENABLED = 0
[   16.998474@5] Wifi: bcmdhd_mem_prealloc: sectoin 1, size 10300
[   17.004259@5] Wifi: bcmdhd_mem_prealloc: sectoin 2, size 65536
[   17.010917@5] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[   17.052051@0] Dongle Host Driver, version 100.10.315.3 (r771911)
[   17.053275@0] ANDROID-MSG) wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
[   17.059207@2] Register interface [wlan0]  MAC: 18:93:7f:67:e5:90
[   17.059207@2]
[   17.066921@0] dhd_dbg_detach_pkt_monitor, 1914
[   17.071369@4] dhd_bus_devreset: == Power OFF ==
[   17.076536@0] dhd_txglom_enable: enable 0
[   17.079833@5] dhd_conf_set_txglom_params: txglom_mode=copy
[   17.085218@5] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
[   17.091979@5] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
[   17.098905@5] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
[   17.105928@5] dhd_bus_devreset:  WLAN OFF DONE
[   17.110446@4] wifi_platform_set_power = 0
[   17.114324@4] ======== PULL WL_REG_ON(-1) LOW! ========
[   17.119526@4] wl_escan_deinit: Enter
[   17.123072@4] wl_destroy_event_handler(): thread:wl_escan_handler:1017 wait for terminate
[   17.123077@3] wl_escan_event_handler: was terminated
[   17.136144@4] wl_destroy_event_handler(): thread:wl_escan_handler:1017 terminated OK
[   17.143880@4] dhdsdio_probe : the lock is released.
[   17.148859@4] dhd_module_init: Exit err=0
[   17.263189@4] dhd_open: Enter ea33a800
[   17.263212@4] dhd_open : no mutex held. set lock
[   17.265897@4]
[   17.265897@4] Dongle Host Driver, version 100.10.315.3 (r771911)
[   17.273596@4] ANDROID-MSG) wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
[   17.280334@4] wl_android_wifi_on in 1
[   17.283937@4] wl_android_wifi_on in 2: g_wifi_on=0
[   17.288702@4] wifi_platform_set_power = 1
[   17.292724@4] ======== PULL WL_REG_ON(-1) HIGH! ========
[   17.298044@4] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 482
[   17.504717@4] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 482
[   18.014175@4] sdio_reset_comm():
[   18.014249@4] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[   18.021658@4] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[   18.027607@4] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[   18.036751@4] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[   18.044241@4] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[   18.050250@4] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[   18.058402@4] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[   18.062941@4] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   18.072799@4] meson-mmc: actual_clock :0, HHI_nand: 0x80
[   18.075246@4] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   18.102192@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[   18.102301@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[   18.237653@0] meson-aml-mmc ffe03000.sdio: divider requested rate 200000000 != actual rate 199999997: ret=0
[   18.241852@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[   18.248047@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[   18.254851@0] meson-mmc: Data 1 aligned delay is 0
[   18.259577@0] meson-mmc: sdio: clk 199999997 tuning start
[   18.267210@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.272386@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.277643@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.282637@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.287784@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.290912@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 0, window start 0, size 5
[   18.299041@2] meson-mmc: sdio: clk 199999997 tuning start
[   18.306755@1] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.311494@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.316665@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.322025@4] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.327172@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.330283@4] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 1, window start 0, size 5
[   18.338641@4] meson-mmc: sdio: clk 199999997 tuning start
[   18.345331@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.350366@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.355571@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.361392@4] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.365933@4] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.369617@4] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 2, window start 0, size 5
[   18.377653@4] meson-mmc: sdio: clk 199999997 tuning start
[   18.385451@3] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.389710@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.394896@4] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.400022@4] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.405377@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.408962@2] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 3, window start 0, size 5
[   18.416942@2] meson-mmc: sdio: clk 199999997 tuning start
[   18.423866@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.429131@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.434227@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.440358@4] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.444687@4] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.448334@4] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 4, window start 0, size 5
[   18.456263@4] meson-mmc: sdio: clk 199999997 tuning start
[   18.465741@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.468461@4] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.473527@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.478836@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.483823@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.487649@4] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 5, window start 0, size 5
[   18.495650@4] meson-mmc: sdio: clk 199999997 tuning start
[   18.502590@2] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.507607@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.512972@4] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.519296@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.526381@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.527074@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 6, window start 0, size 5
[   18.535008@5] meson-mmc: sdio: clk 199999997 tuning start
[   18.541847@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.547176@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.552184@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.557525@4] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.562889@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.566399@3] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 7, window start 0, size 5
[   18.574428@3] meson-mmc: sdio: clk 199999997 tuning start
[   18.581316@4] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.586449@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.591996@3] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.596981@4] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.602050@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.605694@0] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 8, window start 0, size 5
[   18.613764@0] meson-mmc: sdio: clk 199999997 tuning start
[   18.620607@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.625918@4] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.631380@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.636179@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.641971@4] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.645085@4] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 9, window start 0, size 5
[   18.653135@4] meson-mmc: sdio: clk 199999997 tuning start
[   18.661326@5] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.665372@5] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.670599@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.675418@5] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.680674@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.684505@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 10, window start 0, size 5
[   18.692486@5] meson-mmc: sdio: clk 199999997 tuning start
[   18.699622@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.704521@4] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.709811@5] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.714914@4] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.721798@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.723797@5] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 11, window start 0, size 5
[   18.732061@5] meson-mmc: sdio: clk 199999997 tuning start
[   18.739200@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.744513@0] meson-mmc: sdio: rx_tuning_result[1] = 40
[   18.749404@0] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.755016@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.761517@0] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.763275@3] meson-mmc: _aml_sd_emmc_execute_tuning() d1_dly 12, window start 0, size 5
[   18.771466@3] meson-mmc: sdio: clk 199999997 tuning start
[   18.778537@0] meson-mmc: sdio: rx_tuning_result[0] = 40
[   18.782234@4] meson-mmc: Tuning transfer error: nmatch=7 tuning_err:0xffffffac
[   18.790732@4] meson-mmc: sdio: rx_tuning_result[2] = 40
[   18.795939@0] meson-mmc: sdio: rx_tuning_result[3] = 40
[   18.801024@5] meson-mmc: sdio: rx_tuning_result[4] = 40
[   18.804682@5] meson-mmc: sdio: best_win_start =2, best_win_size =4
[   18.810813@5] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x42000
[   18.819841@1] sdioh_start: set sd_f2_blocksize 256
[   18.824563@0]
[   18.824563@0]
[   18.824563@0] dhd_bus_devreset: == WLAN ON ==
[   18.831919@0] F1 signature read @0x18000000=0x17294359
[   18.842234@0] F1 signature OK, socitype:0x1 chip:0x4359 rev:0x9 pkg:0x2
[   18.844326@5] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
[   18.851560@0] dhd_conf_read_config: Ignore config file /vendor/etc/wifi/4359/config.txt
[   18.858337@0] Final fw_path=/vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin
[   18.864851@0] Final nv_path=/vendor/etc/wifi/4359/nvram_ap6398s.txt
[   18.870974@0] Final clm_path=/vendor/etc/wifi/4359/clm.blob
[   18.876508@0] Final conf_path=/vendor/etc/wifi/4359/config.txt
[   18.883470@0] dhd_os_open_image1: /vendor/etc/wifi/4359/fw_bcm4359c0_ag.bin (606301 bytes) open success
[   18.997632@0] dhd_os_open_image1: /vendor/etc/wifi/4359/nvram_ap6398s.txt (5861 bytes) open success
[   19.001605@4] NVRAM version: AP6398S_NVRAM_V1.1_20170926
[   19.007729@4] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[   19.191035@0] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[   19.191487@2] si_get_pmu_reg_addr: addrRET: 18000670
[   19.197045@0] bcmsdh_oob_intr_register: HW_OOB irq=85 flags=0x8
[   19.202910@1] dhd_get_memdump_info: MEMDUMP ENABLED = 0
[   19.210556@3] Disable tdls_auto_op failed. -1
[   19.211782@3] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 1
[   19.219255@5] dhd_apply_default_clm: Ignore clm file /vendor/etc/wifi/4359/clm.blob
[   19.228672@0] Firmware up: op_mode=0x0405, MAC=18:93:7f:67:e5:90
[   19.243780@0]   Driver: 100.10.315.3 (r771911)
[   19.243780@0]   Firmware: wl0: Jan  2 2019 14:30:52 version 9.87.51.11.25 (ba5357b@shgit) (r) FWID 01-b5e1a852
[   19.243780@0]   CLM: 9.7.5
[   19.256375@5] dhd_txglom_enable: enable 1
[   19.259359@5] dhd_conf_set_txglom_params: txglom_mode=copy
[   19.264827@5] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0
[   19.271912@5] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
[   19.278783@5] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
[   19.286130@5] dhd_conf_get_disable_proptx: fw_proptx=0, disable_proptx=1
[   19.293925@0] dhd_pno_init: Support Android Location Service
[   19.327771@0] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
[   19.330462@0] dhd_rtt_init : FTM is not supported
[   19.336380@4] failed to set WNM capabilities
[   19.349108@5] dhd_preinit_ioctls: Failed to get preserve log # !
[   19.349733@1] dhd_conf_set_country: set country CN, revision 38
[   19.357873@4] Country code: CN (CN/38)
[   19.360605@4] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23
[   19.373720@5] wl_android_wifi_on: Success
[   19.415390@1] wl_escan_init: Enter
[   19.415532@1] wl_create_event_handler(): thread:wl_escan_handler:102a started
[   19.416076@4] tsk Enter, tsk = 0xecb50160
[   19.424298@5] dhd_open : the lock is released.
[   19.428709@5] dhd_open: Exit ret=0
[   19.484291@0] P2P interface registered
[   19.484324@0] wl_cfgp2p_add_p2p_disc_if: wdev: e978f000, wdev->net:   (null)
[   19.499681@4] WLC_E_IF: NO_IF set, event Ignored
[   19.565371@4] Random MAC OUI to be used - da:1:19
[   19.580358@4] dhd_dbg_attach_pkt_monitor, 1316
[   19.582873@4] net_os_enable_packet_filter: val = 0
[   19.585042@4] net_os_rxfilter_add_remove: add_remove = 0, num = 2
[   19.595337@5] net_os_enable_packet_filter: val = 1
[   19.596387@5] net_os_enable_packet_filter: val = 0
[   19.600415@5] net_os_rxfilter_add_remove: add_remove = 0, num = 3
[   19.607775@4] net_os_enable_packet_filter: val = 1
[   19.615597@4] dhd_set_suspend: Remove extra suspend setting
[   19.616334@4] dhd_enable_packet_filter: enter, value = 0
[   20.743239@0] zram0: detected capacity change from 0 to 268435456
[   20.759039@3] type=1400 audit(1293883591.880:35): avc: denied { dac_override } for pid=3411 comm="rild" capability=1 scontext=u:r:rild:s0 tcontext=u:r:rild:s0 tclass=capability permissive=1
[   20.763644@1] mkswap: Swapspace size: 262140k, UUID=b8b6576e-3823-4446-8aaf-9decf5e04866
[   20.770709@2] Adding 262140k swap on /dev/block/zram0.  Priority:-1 extents:1 across:262140k SS
[   20.781078@0] selinux: SELinux: Skipping restorecon_recursive(/data/system_ce/0)
[   20.781078@0]
[   20.796072@3] type=1400 audit(1293883598.444:36): avc: denied { getattr } for pid=4145 comm="preinstall.sh" path="/data/local/symbol_thirdpart_apks_installed" dev="mmcblk0p20" ino=392469 scontext=u:r:preinstall:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[   20.859256@0] selinux: SELinux: Skipping restorecon_recursive(/data/misc_ce/0)
[   20.859256@0]
[   21.275794@0] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0
[   22.510056@0] [wlan0] wl_escan_handler : SCAN COMPLETED: scanned AP count=2
[   22.741242@3] audio_dsp: dts_dec_control/0x0
[   22.753224@4] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[   22.753847@4] audio_dsp: last mode 0,now 0
[   22.936787@0] audio_dsp: drc high cut scale set to 100%
[   22.937264@5] audio_dsp: drc low boost scale set to 100%
[   22.942478@3] audio_dsp: drc mode set to LINE
[   23.665386@0] type=1400 audit(1293883598.444:36): avc: denied { getattr } for pid=4145 comm="preinstall.sh" path="/data/local/symbol_thirdpart_apks_installed" dev="mmcblk0p20" ino=392469 scontext=u:r:preinstall:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
[   23.684642@2] type=1400 audit(1293883601.348:37): avc: denied { write } for pid=3813 comm="oid.tv.settings" name="enable" dev="sysfs" ino=17402 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   23.704571@2] type=1400 audit(1293883601.348:37): avc: denied { write } for pid=3813 comm="oid.tv.settings" name="enable" dev="sysfs" ino=17402 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   23.724104@2] type=1400 audit(1293883601.348:38): avc: denied { open } for pid=3813 comm="oid.tv.settings" path="/sys/class/fan/enable" dev="sysfs" ino=17402 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   23.745240@2] type=1400 audit(1293883601.348:38): avc: denied { open } for pid=3813 comm="oid.tv.settings" path="/sys/class/fan/enable" dev="sysfs" ino=17402 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   23.766179@2] type=1400 audit(1293883601.348:39): avc: denied { getattr } for pid=3813 comm="oid.tv.settings" path="/sys/class/fan/enable" dev="sysfs" ino=17402 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   23.788265@2] type=1400 audit(1293883601.348:39): avc: denied { getattr } for pid=3813 comm="oid.tv.settings" path="/sys/class/fan/enable" dev="sysfs" ino=17402 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   26.657596@4] binder_alloc: 4245: binder_alloc_buf size 1056768 failed, no address space
[   26.660115@4] binder_alloc: allocated: 9660 (num: 14 largest: 3140), free: 1030724 (num: 5 largest: 1029384)
[   26.670184@4] binder: 4298:4613 transaction failed 29201/-28, size 1056768-0 line 3258
[   27.254056@3] type=1400 audit(1293883601.392:40): avc: denied { search } for pid=3813 comm="oid.tv.settings" name="leds" dev="sysfs" ino=9667 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs_leds:s0 tclass=dir permissive=1
[   27.268647@3] type=1400 audit(1293883604.936:41): avc: denied { read } for pid=5087 comm="Binder:5087_3" name="address" dev="sysfs" ino=25532 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   27.289362@3] type=1400 audit(1293883604.936:41): avc: denied { read } for pid=5087 comm="Binder:5087_3" name="address" dev="sysfs" ino=25532 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   27.309385@3] type=1400 audit(1293883604.936:42): avc: denied { open } for pid=5087 comm="Binder:5087_3" path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev="sysfs" ino=25532 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   27.336915@3] type=1400 audit(1293883604.936:42): avc: denied { open } for pid=5087 comm="Binder:5087_3" path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev="sysfs" ino=25532 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   27.364261@3] type=1400 audit(1293883604.936:43): avc: denied { getattr } for pid=5087 comm="Binder:5087_3" path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev="sysfs" ino=25532 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   35.168668@3] aml_tdm_open
[   35.168691@3] Not init audio effects
[   35.179878@2] asoc-aml-card auge_sound: tdm playback enable
[   39.979581@0] asoc-aml-card auge_sound: tdm playback stop
[   41.310997@2] [wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0
[   41.368933@0] type=1400 audit(1293883604.936:43): avc: denied { getattr } for pid=5087 comm="Binder:5087_3" path="/sys/devices/platform/ffe03000.sdio/mmc_host/sdio/sdio:0001/sdio:0001:2/net/wlan0/address" dev="sysfs" ino=25532 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   41.391489@0] type=1400 audit(1293883619.052:44): avc: denied { search } for pid=3351 comm="memtrack@1.0-se" name="3337" dev="proc" ino=14699 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=1
[   41.413292@0] type=1400 audit(1293883619.052:44): avc: denied { search } for pid=3351 comm="memtrack@1.0-se" name="3337" dev="proc" ino=14699 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=1
[   41.433766@0] type=1400 audit(1293883619.052:45): avc: denied { read } for pid=3351 comm="memtrack@1.0-se" name="status" dev="proc" ino=38887 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[   41.455146@0] type=1400 audit(1293883619.052:45): avc: denied { read } for pid=3351 comm="memtrack@1.0-se" name="status" dev="proc" ino=38887 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[   41.476338@0] type=1400 audit(1293883619.052:46): avc: denied { open } for pid=3351 comm="memtrack@1.0-se" path="/proc/3337/status" dev="proc" ino=38887 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[   41.498716@0] type=1400 audit(1293883619.052:46): avc: denied { open } for pid=3351 comm="memtrack@1.0-se" path="/proc/3337/status" dev="proc" ino=38887 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[   41.505917@3] audit: audit_lost=8 audit_rate_limit=5 audit_backlog_limit=64
[   41.505919@3] audit: rate limit exceeded
[   41.531598@0] type=1400 audit(1293883619.052:47): avc: denied { getattr } for pid=3351 comm="memtrack@1.0-se" path="/proc/3337/status" dev="proc" ino=38887 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[   41.554357@2] type=1400 audit(1293883619.052:47): avc: denied { getattr } for pid=3351 comm="memtrack@1.0-se" path="/proc/3337/status" dev="proc" ino=38887 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=file permissive=1
[   41.576674@2] type=1400 audit(1293883619.104:48): avc: denied { search } for pid=3351 comm="memtrack@1.0-se" name="3352" dev="proc" ino=640 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_neuralnetworks_default:s0 tclass=dir permissive=1
[   42.605787@2] [wlan0] wl_escan_handler : SCAN COMPLETED: scanned AP count=2

---------- 2020-08-20 19:11:02 +0800: Disconnected ----------


---------- 2020-08-20 19:11:07 +0800: Connected ----------

[   62.694167@0] fb: mem_free_work, free memory: addr:800000
[   68.802171@0] USB RESET
[   68.954912@0] android_work: sent uevent USB_STATE=CONNECTED
[   68.958039@0] USB RESET
[   69.123940@0] configfs-gadget gadget: high-speed config #1: b
[   69.124570@0] android_work: sent uevent USB_STATE=CONFIGURED
[   69.130883@0] Unable to handle kernel NULL pointer dereference at virtual address 0000007d
[   69.137925@0] pgd = c0104000
[   69.140782@0] [0000007d] *pgd=7d00000000
[   69.144687@0] Internal error: Oops: 805 [#1] PREEMPT SMP ARM
[   69.150316@0] Modules linked in: dhd(O) iv009_isp(O) iv009_isp_sensor(O) iv009_isp_lens(O) iv009_isp_iq(O) galcore(O) vpu(O) encoder(O) amvdec_avs2(O) amvdec_vp9(O) amvdec_vc1(O) amvdec_real(O) amvdec_mmpeg4(O) amvdec_mpeg4(O) amvdec_mmpeg12(O) amvdec_mpeg12(O) amvdec_mmjpeg(O) amvdec_mjpeg(O) amvdec_h265(O) amvdec_h264mvc(O) amvdec_mh264(O) amvdec_h264(O) amvdec_avs(O) stream_input(O) decoder_common(O) firmware(O) media_clock(O) tb_detect(O) mali_kbase(O)
[   69.190619@0] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O    4.9.113 #4
[   69.197982@0] Hardware name: Generic DT based system
[   69.202922@0] task: c170e640 task.stack: c1700000
[   69.207607@0] PC is at memset+0xd0/0xe0
[   69.211418@0] LR is at acc_ctrlrequest+0x274/0x5e4
[   69.216184@0] pc : [<c05da910>]    lr : [<c08017ac>]    psr: 800f0193
[   69.216184@0] sp : c1979b0c  ip : c1979b3c  fp : c1979b38
[   69.227968@0] r10: 00000000  r9 : eabbd5bc  r8 : ed237808
[   69.233342@0] r7 : eabbd6bc  r6 : 00000002  r5 : 00000000  r4 : eabbd660
[   69.240015@0] r3 : 00000001  r2 : 00000000  r1 : 000000fc  r0 : 0000007d
[   69.246690@0] Flags: Nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   69.254055@0] Control: 10c5383d  Table: 2a03406a  DAC: 00000051
[   69.259948@0]
[   69.259948@0] PC: 0xc05da890:
[   69.264541@0] a890  18ac410a e3120010 18ac410a e8bd4100 e3120008 18ac000a e3120004 148c1004
[   69.272861@0] a8b0  e3120002 14cc1001 14cc1001 e3120001 14cc1001 e12fff1e e2522004 bafffff7
[   69.281181@0] a8d0  e3530002 b4cc1001 d4cc1001 e4cc1001 e0822003 eaffffd8 00000000 00000000
[   69.289501@0] a8f0  00000000 00000000 00000000 00000000 00000000 e2511004 ba00001d e3530002
[   69.297821@0] a910  b4c02001 d4c02001 e4c02001 e0811003 e3a02000 e2103003 1afffff5 e3510010
[   69.306141@0] a930  ba00000f e52de004 e1a0c002 e1a0e002 e2511040 a8a0500c a8a0500c a8a0500c
[   69.314461@0] a950  a8a0500c cafffff9 08bd8000 e3110020 18a0500c 18a0500c e3110010 18a0500c
[   69.322781@0] a970  e49de004 e3110008 18a0000c e3110004 14802004 e3110002 14c02001 14c02001
[   69.331101@0]
[   69.331101@0] LR: 0xc080172c:
[   69.335694@0] 172c  e1570003 1a000003 ea0000ee e5933010 e1570003 0a0000eb e5923000 e1500003
[   69.344014@0] 174c  e1a02003 1afffff8 e1a00006 e3e05015 eb1c3daa eaffff85 e5857688 e30130b4
[   69.352334@0] 176c  e5902004 e34c3080 e1a00006 e582301c eaffffb1 e5902004 e3a06002 e30130b4
[   69.360654@0] 178c  e3a01c01 e34c3080 e285007d e5922000 e1c260b0 e5942004 e582301c ebf7645c
[   69.368974@0] 17ac  e2850f5f e3a01c01 e2800001 ebf76458 e2850f9f e3a01c01 e2800001 ebf76454
[   69.377294@0] 17cc  e2850fdf e3a01c01 e2800001 ebf76450 e2850e47 e3a01c01 e280000d ebf7644c
[   69.385614@0] 17ec  e2850e57 e3a01c01 e280000d ebf76448 e3a03000 e1a00006 e5853684 e5853688
[   69.393934@0] 180c  eaffff8d e30535c4 e3a00001 e34c3170 e2852e6b e5931000 e282200c e5850684
[   69.402255@0]
[   69.402255@0] SP: 0xc1979a8c:
[   69.406847@0] 9a8c  00000001 c17067cc c1979b00 c05da910 800f0193 ffffffff c1977db4 ed237808
[   69.415167@0] 9aac  c1979b38 c1979abc c020f028 c02012fc 0000007d 000000fc 00000000 00000001
[   69.423487@0] 9acc  eabbd660 00000000 00000002 eabbd6bc ed237808 eabbd5bc 00000000 c1979b38
[   69.431807@0] 9aec  c1979b3c c1979b0c c08017ac c05da910 800f0193 ffffffff 00000051 bc000000
[   69.440127@0] 9b0c  00000000 eabbd56c c1979bac eabbd660 eabbd6bc ed237808 eabbd5bc 00000000
[   69.448447@0] 9b2c  c1979b68 c1979b3c c07ef980 c0801544 c07ef8d8 eda5e000 c19141b4 c1979bb4
[   69.456767@0] 9b4c  ec75ec00 00000001 c1979bac 00000000 c1979b78 c1979b6c c0993ef0 c07ef8e4
[   69.465087@0] 9b6c  c1979c08 c1979b7c c0999790 c0993ebc 00000000 600f0193 600f0193 00000003
[   69.473408@0]
[   69.473408@0] IP: 0xc1979abc:
[   69.478001@0] 9abc  0000007d 000000fc 00000000 00000001 eabbd660 00000000 00000002 eabbd6bc
[   69.486321@0] 9adc  ed237808 eabbd5bc 00000000 c1979b38 c1979b3c c1979b0c c08017ac c05da910
[   69.494641@0] 9afc  800f0193 ffffffff 00000051 bc000000 00000000 eabbd56c c1979bac eabbd660
[   69.502961@0] 9b1c  eabbd6bc ed237808 eabbd5bc 00000000 c1979b68 c1979b3c c07ef980 c0801544
[   69.511281@0] 9b3c  c07ef8d8 eda5e000 c19141b4 c1979bb4 ec75ec00 00000001 c1979bac 00000000
[   69.519601@0] 9b5c  c1979b78 c1979b6c c0993ef0 c07ef8e4 c1979c08 c1979b7c c0999790 c0993ebc
[   69.527921@0] 9b7c  00000000 600f0193 600f0193 00000003 00000001 00000000 00000000 c0f10e50
[   69.536241@0] 9b9c  40080010 c1979bac c0f10e50 c0257808 000033c0 00020000 5f305045 454c4449
[   69.544561@0]
[   69.544561@0] FP: 0xc1979ab8:
[   69.549154@0] 9ab8  c02012fc 0000007d 000000fc 00000000 00000001 eabbd660 00000000 00000002
[   69.557474@0] 9ad8  eabbd6bc ed237808 eabbd5bc 00000000 c1979b38 c1979b3c c1979b0c c08017ac
[   69.565794@0] 9af8  c05da910 800f0193 ffffffff 00000051 bc000000 00000000 eabbd56c c1979bac
[   69.574114@0] 9b18  eabbd660 eabbd6bc ed237808 eabbd5bc 00000000 c1979b68 c1979b3c c07ef980
[   69.582434@0] 9b38  c0801544 c07ef8d8 eda5e000 c19141b4 c1979bb4 ec75ec00 00000001 c1979bac
[   69.590754@0] 9b58  00000000 c1979b78 c1979b6c c0993ef0 c07ef8e4 c1979c08 c1979b7c c0999790
[   69.599074@0] 9b78  c0993ebc 00000000 600f0193 600f0193 00000003 00000001 00000000 00000000
[   69.607394@0] 9b98  c0f10e50 40080010 c1979bac c0f10e50 c0257808 000033c0 00020000 5f305045
[   69.615715@0]
[   69.615715@0] R4: 0xeabbd5e0:
[   69.620307@0] d5e0  00000000 00000000 00000000 eabbb880 00000005 c07efb50 c07efae4 c07ef8d8
[   69.628627@0] d600  c07f0cbc c07eba7c c07ebb18 c07f0cbc c1375930 00000000 00000000 00000000
[   69.636947@0] d620  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.645267@0] d640  00000000 00000000 00000000 00000000 eaa7d440 00000000 00000000 00000001
[   69.653587@0] d660  ed237808 eaa7d480 00000000 eab53ca8 00000000 00000000 00000000 00000000
[   69.661907@0] d680  eab53ca8 00011202 00000002 4018d140 0102234e 00010302 eab53cc8 eab53cc8
[   69.670227@0] d6a0  eaa7d4c0 eaa7d500 eabbd5c4[   69.674180@4] sensors 4-000e: sensor_delaywork_func: Get data failed
[   69.680802@0]  00000005 00000000 00000000 00000000 001c001c
[   69.686347@0] d6c0  00000000 00000000 00000000 00000000 00000000 00000101 00000000 eabbd6dc
[   69.694668@0]
[   69.694668@0] R7: 0xeabbd63c:
[   69.699261@0] d63c  00000000 00000000 00000000 00000000 00000000 eaa7d440 00000000 00000000
[   69.707581@0] d65c  00000001 ed237808 eaa7d480 00000000 eab53ca8 00000000 00000000 00000000
[   69.715901@0] d67c  00000000 eab53ca8 00011202 00000002 4018d140 0102234e 00010302 eab53cc8
[   69.724221@0] d69c  eab53cc8 eaa7d4c0 eaa7d500 eabbd5c4 00000005 00000000 00000000 00000000
[   69.732541@0] d6bc  001c001c 00000000 00000000 00000000 00000000 00000000 00000101 00000000
[   69.740861@0] d6dc  eabbd6dc eabbd6dc c07f07ac 00000000 00000000 00000000 00000000 00000000
[   69.749181@0] d6fc  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.757501@0] d71c  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.765821@0]
[   69.765821@0] R8: 0xed237788:
[   69.770414@0] 7788  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.778734@0] 77a8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.787054@0] 77c8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.795374@0] 77e8  00000000 00000000 00000000 00000000 00000000 00000000 eda5e000 00000000
[   69.803694@0] 7808  00000000 ed23780c ed23780c c07f2f6c ec765400 c1085bbc ed2379fc ed237a34
[   69.812014@0] 7828  ed237dd0 00000003 00000003 00000007 c1795368 00000000 ed03d610 ec66e580
[   69.820334@0] 7848  c1375b68 ec765414 ed03d61c ed03d618 eda21040 c1757290 ec6b3b40 00000002
[   69.828654@0] 7868  00000003 00000000 00000000 00000001 00000000 ed23787c ed23787c 00000000
[   69.836975@0]
[   69.836975@0] R9: 0xeabbd53c:
[   69.841567@0] d53c  eabbd4e8 eabbd544 645f736f 00637365 00000000 00000000 00000000 00000002
[   69.849887@0] d55c  eabbd434 eabbd50c eabbd400 eabbd400 c1766538 ecccec38 eabbd574 eabbd574
[   69.858207@0] d57c  c1766450 eabbd580 eabbd580 eabbd440 eabbd538 00000001 00000000 eabbd598
[   69.866527@0] d59c  eabbd598 00000000 00000000 eabb8d80 00000000 00000000 eabb8dfc eabb8dfc
[   69.874847@0] d5bc  ec3ad6d0 ec181f50 eabbb880 00000000 00000000 00000005 00000000 c07efef0
[   69.883167@0] d5dc  c07efef0 00000000 00000000 00000000 eabbb880 00000005 c07efb50 c07efae4
[   69.891487@0] d5fc  c07ef8d8 c07f0cbc c07eba7c c07ebb18 c07f0cbc c1375930 00000000 00000000
[   69.899807@0] d61c  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.908129@0] Process swapper/0 (pid: 0, stack limit = 0xc1700000)
[   69.914282@0] Stack: (0xc1979b0c to 0xc1702000)
[   69.918797@0] [c1979b38+  48][<c08017ac>] acc_ctrlrequest+0x274/0x5e4
[   69.925209@0] [c1979b68+  48][<c07ef980>] android_setup+0xa8/0x138
[   69.931360@0] [c1979b78+  16][<c0993ef0>] _setup+0x40/0x98
[   69.936820@0] [c1979c08+ 144][<c0999790>] handle_ep0+0xc8c/0x17b0
[   69.942886@0] [c1979c80+ 120][<c099c3bc>] dwc_otg_pcd_handle_out_ep_intr+0x1754/0x1bac
[   69.950772@0] [c1979cb0+  48][<c099f990>] dwc_otg_pcd_handle_intr+0x170/0x2ec
[   69.957878@0] [c1979cc0+  16][<c099475c>] dwc_otg_pcd_irq+0x1c/0x28
[   69.964120@0] [c1979d10+  80][<c029a360>] __handle_irq_event_percpu+0xc4/0x2ac
[   69.971313@0] [c1979d30+  32][<c029a574>] handle_irq_event_percpu+0x2c/0x68
[   69.978245@0] [c1979d50+  32][<c029a5f8>] handle_irq_event+0x48/0x6c
[   69.984572@0] [c1979d70+  32][<c029e044>] handle_fasteoi_irq+0xe0/0x1b0
[   69.991158@0] [c1979d80+  16][<c0299420>] generic_handle_irq+0x34/0x44
[   69.997658@0] [c1979db0+  48][<c0299a20>] __handle_domain_irq+0x8c/0xfc
[   70.004246@0] [c1979dd8+  40][<c02015d0>] gic_handle_irq+0x48/0x84
[   70.010399@0] [c1701d3c+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   70.016120@0] [c1701d3c+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   70.022186@0] [c1701d4c+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   70.028600@0] [c1701d7c+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   70.035186@0] [c1701d94+  24][<c0f08534>] rest_init+0x98/0x9c
[   70.040908@0] Code: 00000000 e2511004 ba00001d e3530002 (b4c02001)
[   70.047145@0] ---[ end trace 6df522f8edfff7ff ]---
[   70.060551@0] Kernel panic - not syncing: Fatal exception in interrupt
[   70.061474@5] CPU5: stopping
[   70.064309@5] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G      D    O    4.9.113 #4
[   70.071664@5] Hardware name: Generic DT based system
[   70.076623@5] [ed9c3d68+  16][<c020e3c0>] show_stack+0x20/0x24
[   70.082421@5] [ed9c3d88+  32][<c05db76c>] dump_stack+0x90/0xac
[   70.088227@5] [ed9c3db0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   70.094204@5] [ed9c3dd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   70.100355@5] [bc021d84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   70.106078@5] [bc021d84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   70.112145@5] [bc021d94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   70.118559@5] [bc021dc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   70.125144@5] [bc021ddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   70.132163@2] CPU2: stopping
[   70.135024@2] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D    O    4.9.113 #4
[   70.142384@2] Hardware name: Generic DT based system
[   70.147335@2] [ed8fbd68+  16][<c020e3c0>] show_stack+0x20/0x24
[   70.153139@2] [ed8fbd88+  32][<c05db76c>] dump_stack+0x90/0xac
[   70.158945@2] [ed8fbdb0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   70.164922@2] [ed8fbdd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   70.171075@2] [bc01bd84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   70.176797@2] [bc01bd84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   70.182862@2] [bc01bd94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   70.189276@2] [bc01bdc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   70.195863@2] [bc01bddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   70.202882@4] CPU4: stopping
[   70.205744@4] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G      D    O    4.9.113 #4
[   70.213104@4] Hardware name: Generic DT based system
[   70.218055@4] [ed9bbd68+  16][<c020e3c0>] show_stack+0x20/0x24
[   70.223859@4] [ed9bbd88+  32][<c05db76c>] dump_stack+0x90/0xac
[   70.229664@4] [ed9bbdb0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   70.235643@4] [ed9bbdd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   70.241795@4] [bc01fd84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   70.247518@4] [bc01fd84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   70.253583@4] [bc01fd94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   70.259996@4] [bc01fdc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   70.266583@4] [bc01fddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   70.273602@3] CPU3: stopping
[   70.276465@3] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D    O    4.9.113 #4
[   70.283824@3] Hardware name: Generic DT based system
[   70.288775@3] [ed98bd68+  16][<c020e3c0>] show_stack+0x20/0x24
[   70.294579@3] [ed98bd88+  32][<c05db76c>] dump_stack+0x90/0xac
[   70.300385@3] [ed98bdb0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   70.306362@3] [ed98bdd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   70.312515@3] [bc01dd84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   70.318238@3] [bc01dd84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   70.324302@3] [bc01dd94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   70.330717@3] [bc01ddc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   70.337303@3] [bc01dddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   70.344327@1] CPU1: stopping
[   70.347183@1] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D    O    4.9.113 #4
[   70.354539@1] Hardware name: Generic DT based system
[   70.359494@1] [ed8e3d68+  16][<c020e3c0>] show_stack+0x20/0x24
[   70.365293@1] [ed8e3d88+  32][<c05db76c>] dump_stack+0x90/0xac
[   70.371098@1] [ed8e3db0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   70.377077@1] [ed8e3dd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   70.383229@1] [bc019d84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   70.388952@1] [bc019d84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   70.395018@1] [bc019d94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   70.401432@1] [bc019dc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   70.408017@1] [bc019ddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   70.423756@0] Rebooting in 5 seconds..
[   75.423967@0] reboot reason 12
bl31 reboot reason: 0xd
bl31 reboot reason: 0xc
system cmd  1.
G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02

L0:00000000
L1:20000703
L2:00008067
L3:14000000
B2:00402000
B1:e0f83180

TE: 241415

BL2 Built : 19:22:01, Jul 31 2019. g12b ge9a9000 - zhiguang.ouyang@droid07-sz

Board ID = 8
Set A53 clk to 24M
Set A73 clk to 24M
Set clk81 to 24M
A53 clk: 1200 MHz
A73 clk: 1200 MHz
CLK81: 166.6M
smccc: 0003f8f2
eMMC boot @ 0
sw8 s
DDR driver_vesion: LPDDR4_PHY_V_0_1_18 build time: Jul 31 2019 19:21:56
board id: 8
Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
fw parse done
Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
PIEI prepare done
fastboot data load
00000000
emmc switch 1 ok
ddr saved addr:00016000
Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
00000000
emmc switch 0 ok
fastboot data verify
verify result: 265
Cfg max: 4, cur: 1. Board id: 255. Force loop cfg
LPDDR4 probe
ddr clk to 1608MHz
Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0

dmc_version 0001
Check phy result
INFO : End of CA training
INFO : End of initialization
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : End of Write leveling coarse delay
INFO : Training has run successfully!
Check phy result
INFO : End of initialization
INFO : End of read dq deskew training
INFO : End of MPR read delay center optimization
INFO : End of write delay center optimization
INFO : End of read delay center optimization
INFO : End of max read latency training
INFO : Training has run successfully!
1D training succeed
Load ddrfw from eMMC, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : Training has run successfully!

channel==0
RxClkDly_Margin_A0==87 ps 9
TxDqDly_Margin_A0==106 ps 11
RxClkDly_Margin_A1==97 ps 10
TxDqDly_Margin_A1==106 ps 11
TrainedVREFDQ_A0==25
TrainedVREFDQ_A1==26
VrefDac_Margin_A0==27
DeviceVref_Margin_A0==25
VrefDac_Margin_A1==28
DeviceVref_Margin_A1==26


channel==1
RxClkDly_Margin_A0==97 ps 10
TxDqDly_Margin_A0==106 ps 11
RxClkDly_Margin_A1==97 ps 10
TxDqDly_Margin_A1==106 ps 11
TrainedVREFDQ_A0==24
TrainedVREFDQ_A1==25
VrefDac_Margin_A0==26
DeviceVref_Margin_A0==24
VrefDac_Margin_A1==28
DeviceVref_Margin_A1==24

 dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004

soc_vref_reg_value 0x 00000027 00000028 00000028 00000026 00000026 00000026 00000025 00000029 00000028 00000027 00000027 00000024 00000025 00000028 00000025 00000025 00000025 00000026 00000027 00000026 00000026 00000026 00000026 00000027 00000027 00000024 00000025 00000027 00000027 00000026 00000026 00000027 dram_vref_reg_value 0x 00000014
2D training succeed
aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_18 build time: Jul 31 2019 19:22:05
auto size-- 65535DDR cs0 size: 2048MB
DDR cs1 size: 2048MB
DMC_DDR_CTRL: 00e00024DDR size: 3928MB
cs0 DataBus test pass
cs1 DataBus test pass
cs0 AddrBus test pass
cs1 AddrBus test pass

non-sec scramble use zero key
ddr scramble enabled

100bdlr_step_size ps== 437
result report
boot times 1Enable ddr reg access
00000000
emmc switch 3 ok
Authentication key not yet programmed
get rpmb counter error 0x00000007
00000000
emmc switch 0 ok
Load FIP TMP HDR from eMMC, src: 0x00010200, des: 0x05100000, size: 0x00004000, part: 0
Load BL31 from eMMC, src: 0x00085200, des: 0x05104000, size: 0x0002ab70, part: 0
bl2z_ptr: 05100000
img_info->image_base: 05100000
NO BL2z!
Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x000d7a00, part: 0
0.0;M3 CHK:0;cm4_sp_mode 0
MVN_1=0x00000000
MVN_2=0x00000000
[Image: g12b_v1.1.3389-92241b5 2019-07-02 17:23:01 luan.yuan@droid15-sz]
OPS=0x10
ring efuse init
chipver efuse init
29 0b 10 00 01 10 06 00 00 03 37 30 4e 42 4e 50
[1.146847 Inits done]
secure task start!
high task start!
low task start!
run into bl31
NOTICE:  BL31: v1.3(release):4fc40b1
NOTICE:  BL31: Built : 15:58:17, May 22 2019
NOTICE:  BL31: G12A normal boot!
NOTICE:  BL31: BL33 decompress pass
ERROR:   Error initializing runtime service opteed_fast


U-Boot 2015.01-g854edde-dirty (Nov 01 2019 - 17:36:54)

DRAM:  3.8 GiB
Relocation Offset is: d6e2c000
spi_post_bind(spifc): req_seq = 0
register usb cfg[0][1] = 00000000d7f2e888
aml_i2c_init_port init regs for 0
NAND:  get_sys_clk_rate_mtd() 290, clock setting 200!
NAND device id: 0 9f ff ff ff ff
No NAND device found!!!
nand init failed: -6
get_sys_clk_rate_mtd() 290, clock setting 200!
NAND device id: 0 9f ff ff ff ff
No NAND device found!!!
nand init failed: -6
MMC:   aml_priv->desc_buf = 0x00000000d3e1ca70
aml_priv->desc_buf = 0x00000000d3e1edb0
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, status=0x3ff2800
emmc/sd response timeout, cmd55, status=0x3ff2800
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x1, tx-dly 0, clock 40000000
aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x2000
[mmc_startup] mmc refix success
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
start dts,buffer=00000000d3e21620,dt_addr=00000000d3e21620
get_partition_from_dts() 91: ret 0
parts: 17
00:      logo   0000000000800000 1
01:  recovery   0000000001800000 1
02:      misc   0000000000800000 1
03:      dtbo   0000000000800000 1
04:  cri_data   0000000000800000 2
05:     param   0000000001000000 2
06:      boot   0000000001000000 1
set has_boot_slot = 0
07:       rsv   0000000001000000 1
08:  metadata   0000000001000000 1
09:    vbmeta   0000000000200000 1
10:       tee   0000000002000000 1
11:    vendor   0000000014000000 1
12:       odm   0000000008000000 1
13:    system   0000000050000000 1
14:   product   0000000008000000 1
15:     cache   0000000046000000 2
16:      data   ffffffffffffffff 4
init_part() 297: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
mmc env offset: 0x4d400000
In:    serial
Out:   serial
Err:   serial
reboot_mode=kernel_panic
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-3406: calc f0b8bbc7, store f0b8bbc7
_verify_dtb_checksum()-3406: calc f0b8bbc7, store f0b8bbc7
dtb_read()-3623: total valid 2
update_old_dtb()-3604: do nothing
aml_i2c_init_port init regs for 0
fusb302_init: Device ID: 0x91
CC connected in 0 as UFP
fusb302 detect chip.port_num = 0
amlkey_init() enter!
[EFUSE_MSG]keynum is 1
vpu: clk_level in dts: 7
vpu: vpu_power_on
vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
vpu: vpu_module_init_config
vpp: vpp_init
vpp: vpp osd2 matrix rgb2yuv..............
cvbs: cpuid:0x29
lcd: detect mode: tablet, key_valid: 0
lcd: load config from dts
lcd: pinctrl_version: 2
lcd: use panel_type=lcd_1
lcd: bl: pinctrl_version: 2
lcd: bl: name: backlight_pwm, method: 1
lcd: bl: aml_bl_power_ctrl: 0
Net:   dwmac.ff3f0000amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 1
MACADDR:02:00:00:06:10:01(from chipid)

CONFIG_AVB2: null
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0

wipe_data=successful
wipe_cache=successful
upgrade_step=0
reboot_mode:::: kernel_panic


lcd: error: outputmode[1080p60hz] is not support
hpd_state=1
edid preferred_mode is 1080p60hz[16]
hdr mode is 0
dv  mode is ver:0  len: 0
hdr10+ mode is 0
[OSD]load fb addr from dts:/meson-fb
[OSD]set initrd_high: 0x7f800000
[OSD]fb_addr for logo: 0x7f800000
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0x7f800000
[OSD]VPP_OFIFO_SIZE:0xfff01fff
[CANVAS]canvas init
[CANVAS]addr=0x7f800000 width=3840, height=2160
[OSD]osd_hw.free_dst_data: 0,1919,0,1079
[OSD]osd1_update_disp_freescale_enable
cvbs: outputmode[1080p60hz] is invalid
vpp: vpp_matrix_update: 2
set hdmitx VIC = 16
config HPLL = 4455000 frac_rate = 1
HPLL: 0x3b0004b9
HPLL: 0x1b0004b9
HPLL: 0xdb0004b9
config HPLL done
j = 6  vid_clk_div = 1
hdmitx: set enc for VIC: 16
hdmitx phy setting done
enc_vpu_bridge_reset[1249]
rx version is 1.4 or below  div=10
vpp: sdr_mode = 2
vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
normal power on
boot wol: disable
saradc: 0x288, hw_ver: 0x32 (VIM3.V12)


gpio: pin GPIOAO_7 (gpio 7) value is 1
port mode is usb3.0
Command: bcb uboot-command
Start read misc partition datas!
BCB hasn't any datas,exit!
Hit Enter or space or Ctrl+C key to stop autoboot -- :  0
pll tsensor avg: 0x20f8, u_efuse: 0x800b
temp1: 46
ddr tsensor avg: 0x2126, u_efuse: 0x8002
temp2: 48
device cool done
CONFIG_SYSTEM_AS_ROOT: systemroot
system_mode: 1
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
CONFIG_AVB2: null
active_slot: normal
avb2: 0
ee_gate_off ...
avb2: 0
## Booting Android Image at 0x01080000 ...
Kernel command line: androidboot.dtbo_idx=0 --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
active_slot is normal
load dtb from 0x1000000 ......
find 1 dtbos
dtbos to be applied: 0
Apply dtbo 0
   Loading Kernel Image(COMP_NONE) ... OK
   kernel loaded at 0x01080000, end = 0x019b1f80
   Loading Device Tree to 0000000009fe6000, end 0000000009fff45b ... OK

Starting kernel ...

uboot time: 3737931 us
[    0.000000@0] Booting Linux on physical CPU 0x0
[    0.000000@0] Linux version 4.9.113-g6574113-dirty (terry@Server) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #4 SMP PREEMPT Fri Nov 1 14:42:39 CST 2019
[    0.000000@0] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000@0] CPU: div instructions available: patching division code
[    0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000@0] OF: fdt:Machine model: Khadas
[    0.000000@0] earlycon: aml-uart0 at MMIO 0xff803000 (options '')
[    0.000000@0] bootconsole [aml-uart0] enabled
[    0.000000@0] Reserved memory: created CMA memory pool at 0x05000000, size 4 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0x7f800000, size 8 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xe5800000, size 128 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xe3000000, size 40 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: regions without no-map are not yet supported
[    0.000000@0] Reserved memory: created CMA memory pool at 0xcfc00000, size 308 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[    0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[    0.000000@0] Reserved memory: created CMA memory pool at 0xcbc00000, size 64 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,vdin0_cma, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xc7c00000, size 64 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,vdin1_cma, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xc6c00000, size 16 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,galcore, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xc0400000, size 104 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,isp_cma, compatible id shared-dma-pool
[    0.000000@0] Reserved memory: created CMA memory pool at 0xbec00000, size 24 MiB
[    0.000000@0] OF: reserved mem: initialized node linux,adapt_cma, compatible id shared-dma-pool
[    0.000000@0] cma: Reserved 8 MiB at 0xbe400000
[    0.000000@0] Memory policy: Data cache writealloc
[    0.000000@0] psci: probing for conduit method from DT.
[    0.000000@0] psci: PSCIv1.0 detected in firmware.
[    0.000000@0] psci: Using standard PSCI v0.2 function IDs
[    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000@0] psci: SMC Calling Convention v1.1
[    0.000000@0] percpu: Embedded 15 pages/cpu @ee1b1000 s32140 r8192 d21108 u61440
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 971264
[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=1 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,444,12bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable wol_enable=0 spi_state=0 fusb302_state=1 hwver=VIM3.V12 factory_mac=c8:63:14:70:48:07 androidboot.hardware=amlogic androidboot.serialno=c86314704807 mac=c8:63:14:70:48:07 androidboot.mac=c8:63:14:70:48:07 androidboot.rpmb_state=0 ro rootwait skip_initramfs androidboot.dtbo_idx=0 --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
[    0.000000@0] fb: osd0
[    0.000000@0] fb: loaded
[    0.000000@0] fb: 0x3d800000
[    0.000000@0] vout: 1080p60hz
[    0.000000@0] vout: enable: 1
[    0.000000@0] lcd: panel_type: lcd_1
[    0.000000@0] vout: get hdmimode: 1080p60hz
[    0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1[    0.000000@0] vout: get cvbsmode: 576cvbs
[    0.000000@0] vpp_axis_reverse: bootargs is 0
[    0.000000@0] phlock_phase_config: bootargs is 0.
[    0.000000@0] jtag: jtag select disable
[    0.000000@0] init_wol_state, wol_enable=0
[    0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000@0] Memory: 3047716K/3891200K available (14336K kernel code, 1256K rwdata, 4916K rodata, 1024K init, 1338K bss, 57052K reserved, 786432K cma-reserved, 2322432K highmem)
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000@0]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000@0]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000@0]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000@0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000@0]     modules : 0xbc000000 - 0xbfe00000   (  62 MB)
[    0.000000@0]       .text : 0xc0108000 - 0xc1000000   (15328 kB)
[    0.000000@0]       .init : 0xc1600000 - 0xc1700000   (1024 kB)
[    0.000000@0]       .data : 0xc1700000 - 0xc183a3b8   (1257 kB)
[    0.000000@0]        .bss : 0xc183c000 - 0xc198abc4   (1339 kB)
[    0.000000@0] zone:Normal, spaned pages:196608, total:196608
[    0.000000@0] zone:HighMem, spaned pages:776192, total:972800
[    0.000000@0] page_trace_pre_work, trace buffer:edc00000, size:3b6000, used:edfb6000, end:ee000000
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000@0] Preemptible hierarchical RCU implementation.
[    0.000000@0]        Build-time adjustment of leaf fanout to 32.
[    0.000000@0]        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=6
[    0.000000@0] NR_IRQS:16 nr_irqs:16 16
[    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000@0] g12a_aoclkc_init: register ao clk ok!
[    0.000000@0] Meson chip version = RevB (29:B - 10:0)
[    0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000@0] meson_g12a_gpu_init: register meson gpu clk
[    0.000000@0] meson_g12a_media_init: register meson media clk
[    0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
[    0.000000@0] meson_g12a_misc_init: done.
[    0.000000@0] g12a_clkc_init initialization complete
[    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
[    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008224@0] Switching to timer-based delay loop, resolution 41ns
[    0.014470@0] meson_bc_timer: mclk->mux_reg =f080c190,mclk->reg =f080e194
[    0.021996@0] Console: colour dummy device 80x30
[    0.025925@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.036397@0] pid_max: default: 32768 minimum: 301
[    0.041258@0] thread_stack_cache_init, vmap:ed822980, bitmap:ed828400, cache page:be000
[    0.049275@0] thread_stack_cache_init, allocation vm area:ed823e00, addr:bc000000, size:3001000
[    0.058060@0] Security Framework initialized
[    0.062309@0] SELinux:  Initializing.
[    0.066054@0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.072815@0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.080700@0] CPU: Testing write buffer coherency: ok
[    0.085135@0] ftrace: allocating 43898 entries in 129 pages
[    0.170823@0] sched-energy: Sched-energy-costs installed from DT
[    0.171192@0] CPU0: update cpu_capacity 631
[    0.175424@0] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.181281@0] Setting up static identity map for 0x200000 - 0x200058
[    0.236169@0] secmon: clear_range:5100000 200000
[    0.284559@1] CPU1: update cpu_capacity 631
[    0.284565@1] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.317204@2] CPU2: update cpu_capacity 1192
[    0.317209@2] CPU2: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.348762@3] CPU3: update cpu_capacity 1192
[    0.348766@3] CPU3: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.380858@4] CPU4: update cpu_capacity 1192
[    0.380862@4] CPU4: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.412959@5] CPU5: update cpu_capacity 1192
[    0.412963@5] CPU5: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.413062@0] Brought up 6 CPUs
[    0.461211@0] SMP: Total of 6 processors activated (288.00 BogoMIPS).
[    0.467694@0] CPU: All CPU(s) started in SVC mode.
[    0.474010@3] addr:bc061cce is in kernel, size fix 4096->10, data:mode=0755
[    0.479660@3] devtmpfs: initialized
[    0.501886@3] VFP support v0.3: implementor 41 architecture 3 part 40 variant 9 rev 0
[    0.504350@3] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.514084@3] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.520715@3] pinctrl core: initialized pinctrl subsystem
[    0.526804@3] NET: Registered protocol family 16
[    0.533029@3] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.537697@3] schedtune: init normalization constants...
[    0.543041@3] schedtune: CLUSTER[0-1]      min_pwr:     0 max_pwr:    42
[    0.549769@3] schedtune: CPU[0]            min_pwr:     0 max_pwr:   279
[    0.556504@3] schedtune: CPU[1]            min_pwr:     0 max_pwr:   279
[    0.563243@3] schedtune: CLUSTER[2-5]      min_pwr:     0 max_pwr:   110
[    0.569979@3] schedtune: CPU[2]            min_pwr:     0 max_pwr:  1048
[    0.576716@3] schedtune: CPU[3]            min_pwr:     0 max_pwr:  1048
[    0.583453@3] schedtune: CPU[4]            min_pwr:     0 max_pwr:  1048
[    0.590195@3] schedtune: CPU[5]            min_pwr:     0 max_pwr:  1048
[    0.596938@3] schedtune: SYSTEM            min_pwr:     0 max_pwr:  4902
[    0.603675@3] schedtune: using normalization constants mul: 2882587190 sh1: 1 sh2: 12
[    0.611548@3] schedtune: verify normalization constants...
[    0.617056@3] schedtune: max_pwr/2^0: 4902 => norm_pwr:  1024
[    0.622835@3] schedtune: max_pwr/2^1: 2451 => norm_pwr:   512
[    0.628604@3] schedtune: max_pwr/2^2: 1225 => norm_pwr:   255
[    0.634384@3] schedtune: max_pwr/2^3:  612 => norm_pwr:   127
[    0.640154@3] schedtune: max_pwr/2^4:  306 => norm_pwr:    63
[    0.645928@3] schedtune: max_pwr/2^5:  153 => norm_pwr:    31
[    0.651703@3] schedtune: configured to support 5 boost groups
[    0.673533@0] cpuidle: using governor menu
[    0.673663@0] register canvas platform driver
[    0.676391@0] register rdma platform driver
[    0.680620@0] aml_vdac_init: module init
[    0.687982@0] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.692747@0] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.699129@3] clkmsr: clkmsr: driver init
[    0.702778@3] codec_mm_module_init
[    0.706251@3] media_configs_system_init
[    0.710801@3] pstore: using zlib compression
[    0.714848@3] console [pstore-1] enabled
[    0.718282@3] pstore: Registered ramoops as persistent store backend
[    0.724680@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[    0.730361@3] ramoops: ramoops_io_en:0 1 old:0x0 ftrace_size:0x40000[    0.738442@3] aml_iomap: amlogic iomap probe done
[    0.741742@3] vpu: driver version: v20190314(8-g12b)
[    0.746284@3] vpu: load vpu_clk: 666666667Hz(7)
[    0.750994@3] vpu: clktree_init
[    0.754012@3] vpu: vpu_probe OK
[    0.761606@3] clkmsr: msr_clk_reg0=f09bc004,msr_clk_reg2=f09be00c
[    0.763247@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.774617@3] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
[    0.776807@0] aml_vdac_probe: ok
[    0.780102@0] canvas_probe reg=ff638000,size=2000
[    0.784626@0] canvas maped reg_base =f09c0000
[    0.797896@0] rdma_probe,cpu_type:0, ver:0, len:8
[    0.798156@0] rdma_register, rdma_table_addr f09e1000 rdma_table_addr_phy be440000 reg_buf ed0b0000
[    0.806092@0] rdma_register success, handle 1 table_size 32768
[    0.811935@0] set_rdma_handle video rdma handle = 1.
[    0.816911@0] g12b revb!!!!
[    0.819776@0] rdma_register, rdma_table_addr f09ea000 rdma_table_addr_phy be448000 reg_buf ed0b8000
[    0.828818@0] rdma_register success, handle 2 table_size 32768
[    0.834684@0] set_rdma_handle video rdma handle = 2.
[    0.840893@0] aml_snd_reg_map[0], reg:ff640000, size:2000
[    0.845113@0] aml_snd_reg_map[1], reg:ff642000, size:2000
[    0.850524@0] aml_snd_reg_map[2], reg:ff64a000, size:2000
[    0.855949@0] aml_snd_reg_map[3], reg:ff656000, size:1800
[    0.861376@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
[    0.866787@0] amlogic auge_snd_iomap probe done
[    0.874301@0] cvbs_out: cvbsout_probe, cpu_id:5,name:meson-g12b-cvbsout
[    0.878018@0] cvbs_out: clk path:0
[    0.881385@0] cvbs_out: error: failed to get vdac_config
[    0.886875@0] vout: vout1: register server: cvbs_vout_server
[    0.892428@0] cvbs_out: register cvbs module server ok
[    0.897588@0] vout: vout2: register server: cvbs_vout2_server
[    0.903362@0] cvbs_out: register cvbs module vout2 server ok
[    0.909052@0] cvbs_out: chrdev devno 264241152 for disp
[    0.914522@0] cvbs_out: create cdev cvbs
[    0.918222@0] cvbs_out: cvbsout_probe OK
[    0.922705@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.929799@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.937228@0] codec_mm_probe ok
[    1.135977@0] vgaarb: loaded
[    1.136328@0] khadas_hwver_probe
[    1.136780@0] SCSI subsystem initialized
[    1.140794@0] usbcore: registered new interface driver usbfs
[    1.146179@0] usbcore: registered new interface driver hub
[    1.151767@2] usbcore: registered new device driver usb
[    1.156938@2] Linux video capture interface: v2.00
[    1.161766@2] pps_core: LinuxPPS API ver. 1 registered
[    1.166812@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.176185@2] PTP clock support registered
[    1.181150@1] secmon: reserve_mem_size:0x300000
[    1.184951@1] secmon secmon: assigned reserved memory node linux,secmon
[    1.191793@1] secmon: get page:ee2e7000, 5000
[    1.195871@1] secmon: share in base: 0xc50fe000, share out base: 0xc50ff000
[    1.202865@1] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    1.211903@1] fb: osd_init_module
[    1.213102@1] fb: viu vsync irq: 58
[    1.216198@1] fb: viu2 vsync irq: 67
[    1.219823@1] 0x000000d8:Y=d8,U=0,V=0
[    1.223427@1] 0x000000d9:Y=d9,U=0,V=0
[    1.227080@1] 0x000000da:Y=da,U=0,V=0
[    1.230777@1] 0x000000db:Y=db,U=0,V=0
[    1.234430@1] 0x000000dc:Y=dc,U=0,V=0
[    1.238121@1] 0x000000dd:Y=dd,U=0,V=0
[    1.242285@1] fb: osd_rdma_init: rdma_table p=0xbe450000,op=0xbe450000 , v=0xf0adb000
[    1.249714@1] rdma_register, rdma_table_addr f0add000 rdma_table_addr_phy be451000 reg_buf edbbe000
[    1.258779@1] rdma_register success, handle 3 table_size 4096
[    1.264542@1] fb: osd_rdma_init:osd rdma handle = 3.
[    1.269549@1] fb: mem_size: 0x800000
[    1.273104@1] fb: mem_size: 0x1980000
[    1.276792@1] fb: mem_size: 0x100000
[    1.280412@3] fb: mem_size: 0x100000
[    1.283970@3] fb: mem_size: 0x800000
[    1.287616@3] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
[    1.294740@3] fb: reserved memory base:0x7f800000, size:800000
[    1.300886@3] vout: error: invalid vinfo1. current vmode is not supported
[    1.307418@3] fb: init fbdev bpp is:32
[    1.312828@0] fb: set osd0 reverse as NONE
[    1.315290@0] vout: error: invalid vinfo1. current vmode is not supported
[    1.324706@0] fb: osd probe OK
[    1.325990@0] hdmitx: system: amhdmitx_probe start
[    1.330023@0] hdmitx: system: Ver: 20190624
[    1.334221@0] hdmitx: system: hdmitx_device.chip_type : 11
[    1.339733@0] hdmitx: system: not find product desc
[    1.344628@0] hdmitx: system: not find match pwr-ctl
[    1.349627@0] hdmitx: system: not find drm_amhdmitx
[    1.354515@0] hdmitx: system: hpd irq = 51
[    1.358716@0] hdmitx: system: hdcp22_tx_skp failed to probe
[    1.364211@0] hdmitx: system: hdcp22_tx_esm failed to probe
[    1.370311@0] vout: vout1: register server: hdmitx_vout_server
[    1.375691@0] vout: vout2: register server: hdmitx_vout2_server
[    1.382357@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[    1.386795@0] hdmitx: hdmitx20: Mapped PHY: 0xff634400
[    1.391970@0] hdmitx: hdmitx20: Mapped PHY: 0xff900000
[    1.397117@0] hdmitx: hdmitx20: Mapped PHY: 0xff800000
[    1.402274@0] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
[    1.407434@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[    1.412606@0] hdmitx: hdmitx20: Mapped PHY: 0xff608000
[    1.417759@0] hdmitx: hdmitx20: Mapped PHY: 0xff600000
[    1.422923@0] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
[    1.428099@0] hdmitx: hw: alread display in uboot 0x10
[    1.433264@0] hdmitx: hw: avmute set to 1
[    1.437272@0] hdmitx: system: fmt_attr 444,12bit
[    1.442013@0] hdmitx: system: amhdmitx_probe end
[    1.446559@0] hdmitx: system: irq 80000002 0
[    1.451520@0] lcd: driver version: 20181012(6-g12b)
[    1.455878@0] lcd: detect mode: tablet, fr_auto_policy: 0, key_valid: 0
[    1.462646@0] lcd: lcd_clktree_probe
[    1.465956@0] lcd: status: 0
[    1.468862@0] vout: vout1: register server: lcd_vout_server
[    1.474461@0] vout: vout2: register server: lcd_vout2_server
[    1.480162@0] lcd: lcd_get_config from dts
[    1.484264@0] lcd: no range_setting
[    1.487790@0] lcd: TL070WSH27, mipi, 8bit, 1024x600
[    1.492676@0] lcd: pixel_clk = 47.250MHz, bit_rate = 283.500MHz
[    1.498930@0] lcd: lcd_fops_create OK
[    1.502270@0] vout: error: invalid vinfo1. current vmode is not supported
[    1.509125@0] fb: current vmode=invalid, cmd: 0x20000
[    1.514194@0] lcd: request lcd_vsync_irq successful
[    1.519090@0] lcd: request lcd_vsync2_irq successful
[    1.524070@0] lcd: lcd_probe ok
[    1.527629@0] vout: create vout attribute OK
[    1.531695@0] vout: vout_fops_create OK
[    1.535343@0] vout: vout1: register server: nulldisp_vout_server
[    1.541521@0] vout: tvout monitor interval:500(ms), timeout cnt:20
[    1.547638@0] hdmitx: hdmitx_set_current_vmode[3688]
[    1.552596@0] hdmitx: system: recalc before 1080p60hz 60 1
[    1.558108@0] hdmitx: system: recalc after 1080p60hz 2997 50
[    1.563803@0] hdmitx: alread display in uboot
[    1.568170@0] vout: init mode 1080p60hz set ok
[    1.572631@0] vout: aml_tvout_mode_monitor
[    1.576761@0] vout: aml_vout_probe OK
[    1.581288@3] chip type:0x29
[    1.583787@3] Advanced Linux Sound Architecture Driver Initialized.
[    1.590142@3] Bluetooth: Core ver 2.22
[    1.593400@3] NET: Registered protocol family 31
[    1.598008@3] Bluetooth: HCI device and connection manager initialized
[    1.604632@3] Bluetooth: HCI socket layer initialized
[    1.609659@3] Bluetooth: L2CAP socket layer initialized
[    1.614925@3] Bluetooth: SCO socket layer initialized
[    1.620319@4] NetLabel: Initializing
[    1.623565@4] NetLabel:  domain hash size = 128
[    1.628104@4] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.633316@4] NetLabel:  unlabeled traffic allowed by default
[    1.643002@0] clocksource: Switched to clocksource arch_sys_counter
[    1.711569@0] VFS: Disk quotas dquot_6.6.0
[    1.711643@0] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.730170@0] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
[    1.730204@0] jtag: module init
[    1.733245@0] NET: Registered protocol family 2
[    1.738036@0] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.744826@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.751487@0] TCP: Hash tables configured (established 8192 bind 8192)
[    1.757994@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.764108@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.770784@0] NET: Registered protocol family 1
[    1.777309@0] wifi: power_on_pin_OD = 0;
[    1.779155@0] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
[    1.785066@0] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
[    1.791738@0] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
[    1.798393@0] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
[    1.804580@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
[    1.812436@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
[    1.818594@0] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
[    1.824529@0] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
[    1.831548@0] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
[    1.837394@0] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
[    1.843414@0] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
[    1.848764@0] aml_wifi wifi: [wifi_setup_dt] irq num is:(85)
[    1.854366@0] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
[    1.860340@0] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
[    1.871714@0] enable_pmuserenr_all() start
[    1.871748@0] enable_pmuserenr_all() end
[    1.874222@0] hw perfevents: clusterb_enabled = 1
[    1.878979@0] hw perfevents: cpumasks 0x3, 0x3c
[    1.883540@0] hw perfevents: cluster A irq = 25
[    1.888084@0] hw perfevents: cluster B irq = 26
[    1.892697@0] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    1.905417@3] audit: initializing netlink subsys (disabled)
[    1.906627@3] audit: type=2000 audit(1.636:1): initialized
[    1.917013@0] workingset: timestamp_bits=30 max_order=20 bucket_order=0
[    1.928032@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.928746@0] exFAT: Version 1.2.9
[    1.933095@0] Registering sdcardfs 0.1
[    1.935826@0] ntfs: driver 2.1.32 [Flags: R/O].
[    1.940521@0] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.948297@4] fuse init (API version 7.26)
[    1.958553@0] NET: Registered protocol family 38
[    1.958587@0] Key type asymmetric registered
[    1.961930@0] Asymmetric key parser 'x509' registered
[    1.967083@0] bounce: pool size: 64 pages
[    1.971150@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    1.978625@5] io scheduler noop registered (default)
[    1.983531@5] io scheduler deadline registered
[    1.988058@5] io scheduler cfq registered
[    1.995186@0] hdmitx: system: plugin
[    2.031159@2] random: fast init done
[    2.031220@2] random: crng init done
[    2.041848@2] brd: module loaded
[    2.048225@2] loop: module loaded
[    2.048956@5] zram: Added device: zram0
[    2.049823@5] mcu_probe
[    2.053315@5] mcu version is 2
[    2.056602@1] create_mcu_attrs
[    2.058432@1] mcu_probe,wol enable=0
[    2.064140@5] mtdoops: mtd device (mtddev=name/number) must be supplied
[    2.069356@5] libphy: Fixed MDIO Bus: probed
[    2.073081@5] tun: Universal TUN/TAP device driver, 1.6
[    2.078120@5] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.085192@3]  REG0:Addr = f0cf9540
[    2.088040@3] read auto_cali_idx fail
[    2.091656@3] Not set  cali_val for REG1
[    2.095952@2] meson6-dwmac ff3f0000.ethernet: no reset control found
[    2.101985@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
[    2.107238@2]  Ring mode enabled
[    2.110454@2]  DMA HW capability register supported[    2.115199@2]  Normal descriptors
[    2.118503@2]  RX Checksum Offload Engine supported
[    2.123420@2]        COE Type 2
[    2.126028@2]  TX Checksum insertion supported
[    2.127346@0] hdmitx: edid: EDID Parser:
[    2.127349@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.127351@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.127353@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.127361@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.127363@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.127366@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.127370@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.127372@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.127374@0] hdmitx: hdmitx: reach vesa idx MAX
[    2.127389@0] hdmitx: edid: get dtd0 vic: 16
[    2.127393@0] hdmitx: hdmitx: get PMT vic: 16
[    2.127396@0] hdmitx: edid: find IEEEOUT
[    2.127424@0] hdmitx: edid: check sum valid
[    2.127426@0] hdmitx: edid: check sum valid
[    2.127430@0] hdmitx: edid: update rx hdr info 0 at edid parsing
[    2.127434@0] hdmitx: edid: check sum valid
[    2.127436@0] hdmitx: edid: check sum valid
[    2.127440@0] hdmitx: edid: blk0 raw data
[    2.127477@0] hdmitx: edid:
[    2.127477@0] 00ffffffffffff0004720003fff020510c190103803c2278ca7b45a4554aa227
[    2.127477@0] 0b5054bfef80714f8140818081c081009500b300d1c0023a801871382d40582c
[    2.127477@0] 450056502100001e000000fd00384c1f5311000a202020202020000000fc0047
[    2.127477@0] 323736484c0a202020202020000000ff004c57394346303033383535340a01a0
[    2.127477@0]
[    2.127477@0]
[    2.127479@0] hdmitx: edid: blk1 raw data
[    2.127515@0] hdmitx: edid:
[    2.127515@0] 020324f14f01020304050607901112131415161f230907078301000067030c00
[    2.127515@0] 1000382d023a801871382d40582c450056502100001f011d8018711c1620582c
[    2.127515@0] 250056502100009f011d007251d01e206e28550056502100001e8c0ad08a20e0
[    2.127515@0] 2d10103e960056502100001800000000000000000000000000000000000000de
[    2.127515@0]
[    2.127515@0]
[    2.127518@0] hdmitx: system: update physcial size: 600 340
[    2.127523@0] hdmitx: hw: set audio
[    2.127528@0] hdmitx: hw: hdmitx tx_aud_src = 0
[    2.127541@0] hdmitx: fs = 0, cd = 6, tmds_clk = 0
[    2.127544@0] hdmitx: hw: aud_n_para = 6144
[    2.127552@0] hdmitx: hw: set channel status
[    2.317139@2]  Wake-Up On Lan supported
[    2.321025@2]  Enable RX Mitigation via HW Watchdog Timer
[    2.329651@0] libphy: stmmac: probed
[    2.329996@0] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    2.336661@0] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[    2.343970@2] PPP generic driver version 2.4.2
[    2.347347@3] PPP BSD Compression module registered
[    2.352058@3] PPP Deflate Compression module registered
[    2.357324@3] PPP MPPE Compression module registered
[    2.362317@3] NET: Registered protocol family 24
[    2.367015@3] usbcore: registered new interface driver asix
[    2.372591@3] usbcore: registered new interface driver ax88179_178a
[    2.378899@3] usbcore: registered new interface driver cdc_ether
[    2.384921@3] usbcore: registered new interface driver net1080
[    2.390776@3] usbcore: registered new interface driver cdc_subset
[    2.396892@3] usbcore: registered new interface driver zaurus
[    2.402688@3] usbcore: registered new interface driver cdc_ncm
[    2.408531@3] usbcore: registered new interface driver qmi_wwan
[    2.414890@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.421180@3] ehci-pci: EHCI PCI platform driver
[    2.425878@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.432230@3] ohci-pci: OHCI PCI platform driver
[    2.437279@3] usbcore: registered new interface driver cdc_acm
[    2.442704@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.450978@3] usbcore: registered new interface driver cdc_wdm
[    2.456840@3] usbcore: registered new interface driver usb-storage
[    2.463077@3] usbcore: registered new interface driver usbserial
[    2.469084@3] usbcore: registered new interface driver option
[    2.474844@3] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.482340@5] mousedev: PS/2 mouse device common for all mice
[    2.488036@5] usbcore: registered new interface driver xpad
[    2.493436@5] edt_ft5x06 3-0038: probing for EDT FT5x06 I2C
[    2.823969@0] edt_ft5x06 3-0038: touchscreen probe failed
[    2.824089@0] sensor_register_slave:kxtj3,id=0
[    2.837852@0] khadas-rtc 4-0051: rtc core: registered khadas-rtc as rtc0
[    2.838973@0] i2c /dev entries driver
[    2.843329@4] IR NEC protocol handler initialized
[    2.847356@4] IR RC5(x/sz) protocol handler initialized
[    2.852589@4] IR RC6 protocol handler initialized
[    2.857323@4] IR JVC protocol handler initialized
[    2.862029@4] IR Sony protocol handler initialized
[    2.866856@4] IR SANYO protocol handler initialized
[    2.871752@4] IR Sharp protocol handler initialized
[    2.876641@4] IR MCE Keyboard/mouse protocol handler initialized
[    2.882677@4] IR XMP protocol handler initialized
[    2.887470@4] usbcore: registered new interface driver uvcvideo
[    2.893361@4] USB Video Class driver (1.1.1)
[    2.897688@4] usbcore: registered new interface driver cx231xx
[    2.903511@4] md: linear personality registered for level -1
[    2.909663@0] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    2.918062@0] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
[    2.926318@0] Bluetooth: HCI UART driver ver 2.3
[    2.930910@0] Bluetooth: HCI UART protocol H4 registered
[    2.937788@0] ledtrig-cpu: registered to indicate activity on CPUs
[    2.943042@0] hidraw: raw HID events driver (C) Jiri Kosina
[    2.948572@4] usbcore: registered new interface driver usbhid
[    2.953843@4] usbhid: USB HID core driver
[    2.958027@0] ashmem: initialized
[    2.962322@0] value of voltage_tolerance 0
[    2.966122@0] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
[    2.971880@0] value of voltage_tolerance 0
[    2.975974@0] cpu cpu2: meson_cpufreq_init: CPU 2 initialized
[    2.981578@0] meson_cpufreq_probe: Registered platform drive
[    2.986813@0] ff803000.serial: clock gate not found
[    2.991568@0] meson_uart ff803000.serial: ==uart0 reg addr = f0cfd000
[    2.998054@0] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 40, base_baud = 1500000) is a meson_uart
[    3.013043@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[    3.015712@0] console [ttyS0] enabled
[    3.015712@0] console [ttyS0] enabled
[    3.022959@0] bootconsole [aml-uart0] disabled
[    3.022959@0] bootconsole [aml-uart0] disabled
[    3.032210@0] meson_uart ffd24000.serial: ==uart1 reg addr = f0eae000
[    3.038254@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 49, base_baud = 1500000) is a meson_uart
[    3.047970@0] meson_uart ffd22000.serial: ==uart3 reg addr = f0ec1000
[    3.054023@0] ffd22000.serial: ttyS3 at MMIO 0xffd22000 (irq = 50, base_baud = 1500000) is a meson_uart
[    3.064423@0] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xf0ee4000
[    3.073781@0] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xf0eef080
[    3.084249@2] Error: Driver 'meson_reset' is already registered, aborting...
[    3.091408@2] gpio-keypad gpio_keypad: power key(116) registed.
[    3.096619@2] input: gpio_keypad as /devices/platform/gpio_keypad/input/input1
[    3.103893@0] meson-remote: Driver init
[    3.107704@0] meson-remote: remote_probe
[    3.111526@0] meson-remote ff808040.rc: protocol = 0x1
[    3.116559@0] meson-remote ff808040.rc: don't find the node <led_blink>
[    3.123143@0] meson-remote ff808040.rc: led_blink = 0
[    3.128185@0] meson-remote ff808040.rc: don't find the node <led_blink_frq>
[    3.135111@0] meson-remote ff808040.rc: led_blink_frq  = 100
[    3.140755@0] meson-remote ff808040.rc: platform_data irq =48
[    3.146522@0] meson-remote ff808040.rc: custom_number = 1
[    3.151845@0] meson-remote ff808040.rc: ptable->map_size = 13
[    3.157561@0] meson-remote ff808040.rc: ptable->custom_name = khadas-ir
[    3.164183@0] meson-remote ff808040.rc: ptable->custom_code = 0xff00
[    3.170474@0] meson-remote ff808040.rc: ptable->release_delay = 80
[    3.176636@0] meson-remote ff808040.rc: default protocol = 0x1 and id = 0
[    3.183380@0] meson-remote ff808040.rc: reg=0x0, val=0x1f40190
[    3.189184@0] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8
[    3.195004@0] meson-remote ff808040.rc: reg=0x8, val=0x960050
[    3.200712@0] meson-remote ff808040.rc: reg=0xc, val=0x480028
[    3.206431@0] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013
[    3.212418@0] meson-remote ff808040.rc: reg=0x18, val=0x8616800
[    3.218304@0] meson-remote ff808040.rc: reg=0x1c, val=0x9f00
[    3.223939@0] meson-remote ff808040.rc: reg=0x20, val=0x0
[    3.229318@0] meson-remote ff808040.rc: reg=0x24, val=0x0
[    3.234688@0] meson-remote ff808040.rc: reg=0x28, val=0x0
[    3.240490@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input2
[    3.247567@0] meson-remote: IR XMP protocol handler initialized
[    3.253336@5] efuse_probe: Unable to map efuse base
[    3.259736@0] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
[    3.265518@0] ge2d: ge2d_init_module
[    3.268872@0] ge2d: ge2d_dev major:235
[    3.272616@0] ge2d: clock source clk_ge2d_gate ec59dcc0
[    3.277654@0] ge2d: clock clk_ge2d source ec59d100
[    3.282361@0] ge2d: clock source clk_vapb_0 ec59dd40
[    3.287293@0] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
[    3.294569@2] ge2d: ge2d clock is 499 MHZ
[    3.298476@2] ge2d: find address resource
[    3.302463@2] ge2d: map io source 0xff940000,size=65536 to 0xf1010000
[    3.308873@2] ge2d: reserved mem init failed
[    3.313117@2] ge2d: ge2d: pdev=ed066400, irq=57, clk=ec59dcc0
[    3.318854@2] ge2d: ge2d start monitor
[    3.322603@4] ge2d: ge2d workqueue monitor start
[    3.322789@3] [tsync_pcr_init]init success.
[    3.322883@3] amvideom vsync irq: 58
[    3.323338@2] hdmitx: hdcp: hdmitx_hdcp_init
[    3.323576@3] vout: vout2: create vout2 attribute OK
[    3.323651@0] vout: vout2: vout2_fops_create OK
[    3.323773@2] vout: vout2: clktree_init
[    3.323774@2] vout: vout2: register server: nulldisp_vout2_server
[    3.323834@2] vout: vout2: init mode null set ok
[    3.323835@2] vout: vout2: aml_vout2_probe OK
[    3.323879@2] DI: di_module_init ok.
[    3.323881@2] DI: di_module_init: major 509
[    3.324068@0] deinterlace deinterlace: assigned reserved memory node linux,di_cma
[    3.324072@0] di:flag_cma=1
[    3.324074@0] DI: CMA size 0x2800000.
[    3.324103@3] pre_irq:82
[    3.324109@3] post_irq:83
[    3.324110@3] DI: di_probe allocate rdma channel 0.
[    3.324113@3] di_get_vpu_clkb: get clk vpu error.
[    3.324115@3] DI: vpu clkb <334000000, 667000000>
[    3.324131@3] get clkb rate:333333328
[    3.324134@3] DI:enable vpu clkb.
[    3.324142@3] 0x000000de:Y=de,U=0,V=0
[    3.324142@3] 0x000000df:Y=df,U=0,V=0
[    3.324143@3] 0x000000e0:Y=e0,U=0,V=0
[    3.324144@3] 0x000000e1:Y=e1,U=0,V=0
[    3.324145@3] 0x000000e2:Y=e2,U=0,V=0
[    3.324146@3] 0x000000e3:Y=e3,U=0,V=0
[    3.324147@3] 0x000000f0:Y=f0,U=0,V=0
[    3.324148@3] 0x000000f1:Y=f1,U=0,V=0
[    3.324148@3] 0x000000f2:Y=f2,U=0,V=0
[    3.324149@3] 0x000000f3:Y=f3,U=0,V=0
[    3.324152@3] 0x000000f4:Y=f4,U=0,V=0
[    3.324153@3] 0x000000f5:Y=f5,U=0,V=0
[    3.324154@3] 0x000000f6:Y=f6,U=0,V=0
[    3.324155@3] 0x000000f7:Y=f7,U=0,V=0
[    3.324155@3] 0x000000f8:Y=f8,U=0,V=0
[    3.324156@3] 0x000000f9:Y=f9,U=0,V=0
[    3.324159@3] 0x000000fa:Y=fa,U=0,V=0
[    3.324159@3] 0x000000fb:Y=fb,U=0,V=0
[    3.324160@3] 0x000000fc:Y=fc,U=0,V=0
[    3.324161@3] 0x000000fd:Y=fd,U=0,V=0
[    3.324162@3] 0x000000fe:Y=fe,U=0,V=0
[    3.324163@3] 0x000000ff:Y=ff,U=0,V=0
[    3.324164@3] 0x0000003a:Y=3a,U=0,V=0
[    3.324165@3] 0x0000003b:Y=3b,U=0,V=0
[    3.324166@3] 0x0000003c:Y=3c,U=0,V=0
[    3.324167@3] DI: support multi decoding 58~59~60.
[    3.324264@3] DI: di_probe:Di use HRTIMER
[    3.324336@5] di_probe:ok
[    3.324375@5] vdin_drv_init: major 508
[    3.327180@5] rdma_register, rdma_table_addr f1003000 rdma_table_addr_phy be452000 reg_buf ec565800
[    3.327181@5] rdma_register success, handle 4 table_size 512
[    3.327183@5] vdin_drv_probe:vdin.0 rdma hanld 4.
[    3.327337@2] vdin vdin0: assigned reserved memory node linux,vdin0_cma
[    3.327338@2]
[    3.327338@2]  vdin memory resource done.
[    3.327340@2] vdin0 cma_mem_size = 64 MB
[    3.327342@2] vdin0 irq: 55 rdma irq: 2
[    3.327344@2] set_canvas_manual = 0
[    3.327345@2] no urgent_en found
[    3.327361@2] get fclk_div5 err
[    3.327362@2] vdin_drv_probe: vdin cannot get msr clk !!!
[    3.327375@2] vdin_drv_probe: driver initialized ok
[    3.327409@2] rdma_register, rdma_table_addr f1005000 rdma_table_addr_phy be453000 reg_buf ecfd4400
[    3.327410@2] rdma_register success, handle 5 table_size 512
[    3.327411@2] vdin_drv_probe:vdin.1 rdma hanld 5.
[    3.327527@0] vdin vdin1: assigned reserved memory node linux,vdin1_cma
[    3.327529@0]
[    3.327529@0]  vdin memory resource done.
[    3.327531@0] vdin1 cma_mem_size = 64 MB
[    3.327551@3] vdin1 irq: 56 rdma irq: 4
[    3.327553@3] set_canvas_manual = 0
[    3.327554@3] no urgent_en found
[    3.327566@3] get fclk_div5 err
[    3.327567@3] vdin_drv_probe: vdin cannot get msr clk !!!
[    3.327572@3] vdin_debugfs_init only support debug vdin0 1
[    3.327573@3] vdin_drv_probe: driver initialized ok
[    3.327627@3] vdin_drv_init: vdin driver init done
[    3.327629@3] [viuin..]viuin_init_module viuin module init
[    3.327752@3] [viuin..]viuin_probe probe ok.
[    3.327968@3] [RX]-hdmirx: hdmirx_init.
[    3.327969@3] ESM HLD: Initializing...
[    3.328048@0] tvin_afe: tvafe_drv_init: major 506
[    3.328235@2] tvin_afe: tvafe_drv_init.
[    3.328316@2] tvafe_vbi: vbi: vbi_init.
[    3.328410@2] amvdec_csi module: init.
[    3.328412@2] amvdec_csi_init_module:major 504
[    3.328491@2] amvdec_csi module: init. ok
[    3.328493@2] amlvid:info: amlvideo_init called
[    3.328493@2] amlvid:info: amlvideo_create_instance called
[    3.328495@2] amlvid:info: v4l2_dev.name=:amlvideo-000
[    3.328585@0] amlvideo-000: V4L2 device registered as video10
[    3.328586@0] amlvid:info: amlvideo_create_instance called
[    3.328589@0] amlvid:info: v4l2_dev.name=:amlvideo-001
[    3.328708@0] amlvideo-001: V4L2 device registered as video23
[    3.328827@5] PPMGRDRV: warn: ppmgr module init func called
[    3.328891@5] PPMGRDRV: err: ppmgr_driver_probe called
[    3.328925@5] PPMGRDRV: info: ppmgr_dev major:503
[    3.329044@0] ppmgr: probe of ppmgr failed with error -22
[    3.329376@0] ionvideo-000: V4L2 device registered as video13
[    3.329506@0] ionvideo-001: V4L2 device registered as video14
[    3.329623@0] ionvideo-002: V4L2 device registered as video15
[    3.329737@0] ionvideo-003: V4L2 device registered as video16
[    3.329850@0] ionvideo-004: V4L2 device registered as video17
[    3.329974@0] ionvideo-005: V4L2 device registered as video18
[    3.330106@0] ionvideo-006: V4L2 device registered as video19
[    3.330219@0] ionvideo-007: V4L2 device registered as video20
[    3.330334@0] ionvideo-008: V4L2 device registered as video21
[    3.330335@0] ionvid: info: Video Technology Magazine Ion Video
[    3.330337@0] ionvid: info: Capture Board ver 1.0 successfully loaded
[    3.330465@3] picdec: picdec_driver_probe called.
[    3.330593@0] picdec: probe of picdec failed with error -22
[    3.330754@1] videosync_create_instance dev_s eceffe00,dev_s->dev ed282880
[    3.330757@1] videosync_create_instance reg videosync.0
[    3.330819@1] aml_vecm_init:module init
[    3.330823@2] videosync_thread started
[    3.330928@2]
[    3.330928@2]  VECM probe start
[    3.331111@0] vlock_status_init vlock_en:0
[    3.331170@3] Can't find  wb_sel.
[    3.331172@3] hdr:Can't find  cfg_en_osd_100.
[    3.331173@3] Can't find  tx_op_color_primary.
[    3.331175@3] amlogic, vecm
[    3.331175@3] vlock dt support: 1
[    3.331176@3] vlock dt new_fsm: 0
[    3.331177@3] vlock dt hwver: 0
[    3.331178@3] vlock dt phlock_en: 0
[    3.331179@3] Can't find  vlock_en.
[    3.331180@3] Can't find  vlock_mode.
[    3.331181@3] Can't find  vlock_pll_m_limit.
[    3.331181@3] Can't find  vlock_line_limit.
[    3.331196@3] param_config vlock_en:0
[    3.331199@3] aml_vecm_probe: ok
[    3.331227@3] amdolby_vision_init:module init
[    3.331352@3]
[    3.331352@3]  amdolby_vision probe start & ver: 20181220
[    3.331355@3]
[    3.331355@3]  cpu_id=2 tvmode=0
[    3.331425@5] dolby_vision_init_receiver(dvel)
[    3.331427@5] dolby_vision_init_receiver: dvel
[    3.331505@5] amdolby_vision_probe: ok
[    3.331530@5] prime_sl module init
[    3.331673@5] reg base = f102d000
[    3.332011@2] vm_init .
[    3.332458@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[    3.333027@3] meson-mmc: >>>>>>>>hostbase f1035000, dmode
[    3.333171@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    3.333172@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[    3.380406@3] meson-mmc: meson_mmc_probe() : success!
[    3.383720@5] meson-mmc: >>>>>>>>hostbase f10bf000, dmode
[    3.383736@5] meson-mmc: gpio_cd = 1ca
[    3.428005@5] meson-mmc: meson_mmc_probe() : success!
[    3.428606@2] meson-mmc: >>>>>>>>hostbase f1149000, dmode
[    3.428738@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[    3.428740@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
[    3.430407@3] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
[    3.430409@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
[    3.430410@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
[    3.430413@3] meson-mmc: Data 1 aligned delay is 0
[    3.430414@3] meson-mmc: emmc: clk 199999997 tuning start
[    3.431321@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    3.431344@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[    3.432199@3] meson-mmc: emmc: rx_tuning_result[2] = 40
[    3.433055@3] meson-mmc: emmc: rx_tuning_result[3] = 40
[    3.433910@3] meson-mmc: emmc: rx_tuning_result[4] = 40
[    3.433912@3] meson-mmc: emmc: best_win_start =2, best_win_size =3
[    3.433914@3] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
[    3.433994@3] emmc: new HS200 MMC card at address 0001
[    3.434240@3] emmc: clock 199999997, 8-bit-bus-width
[    3.434240@3]
[    3.434240@3] mmcblk0: emmc:0001 BJTD4R 29.1 GiB
[    3.434362@3] mmcblk0boot0: emmc:0001 BJTD4R partition 1 4.00 MiB
[    3.434480@3] mmcblk0boot1: emmc:0001 BJTD4R partition 2 4.00 MiB
[    3.434597@3] mmcblk0rpmb: emmc:0001 BJTD4R partition 3 4.00 MiB
[    3.435082@3] meson-mmc: Enter aml_emmc_partition_ops
[    3.435378@3] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
[    3.435378@3] meson-mmc: add_emmc_partition
[    3.435453@3] meson-mmc: [mmcblk0p01]           bootloader  offset 0x000000000000, size 0x000000400000
[    3.435517@3] meson-mmc: [mmcblk0p02]             reserved  offset 0x000002400000, size 0x000004000000
[    3.435573@3] meson-mmc: [mmcblk0p03]                cache  offset 0x000006c00000, size 0x000046000000
[    3.435634@3] meson-mmc: [mmcblk0p04]                  env  offset 0x00004d400000, size 0x000000800000
[    3.435700@3] meson-mmc: [mmcblk0p05]                 logo  offset 0x00004e400000, size 0x000000800000
[    3.435767@3] meson-mmc: [mmcblk0p06]             recovery  offset 0x00004f400000, size 0x000001800000
[    3.435831@3] meson-mmc: [mmcblk0p07]                 misc  offset 0x000051400000, size 0x000000800000
[    3.435888@3] meson-mmc: [mmcblk0p08]                 dtbo  offset 0x000052400000, size 0x000000800000
[    3.435990@3] meson-mmc: [mmcblk0p09]             cri_data  offset 0x000053400000, size 0x000000800000
[    3.436053@3] meson-mmc: [mmcblk0p10]                param  offset 0x000054400000, size 0x000001000000
[    3.436121@3] meson-mmc: [mmcblk0p11]                 boot  offset 0x000055c00000, size 0x000001000000
[    3.436185@3] meson-mmc: [mmcblk0p12]                  rsv  offset 0x000057400000, size 0x000001000000
[    3.436253@3] meson-mmc: [mmcblk0p13]             metadata  offset 0x000058c00000, size 0x000001000000
[    3.436316@3] meson-mmc: [mmcblk0p14]               vbmeta  offset 0x00005a400000, size 0x000000200000
[    3.436373@3] meson-mmc: [mmcblk0p15]                  tee  offset 0x00005ae00000, size 0x000002000000
[    3.436435@3] meson-mmc: [mmcblk0p16]               vendor  offset 0x00005d600000, size 0x000014000000
[    3.436493@3] meson-mmc: [mmcblk0p17]                  odm  offset 0x000071e00000, size 0x000008000000
[    3.436585@3] meson-mmc: [mmcblk0p18]               system  offset 0x00007a600000, size 0x000050000000
[    3.436656@3] meson-mmc: [mmcblk0p19]              product  offset 0x0000cae00000, size 0x000008000000
[    3.436725@3] meson-mmc: [mmcblk0p20]                 data  offset 0x0000d3600000, size 0x000674600000
[    3.436734@3] card key: card_blk_probe.
[    3.436736@3] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
[    3.436738@3] emmc key: emmc_key_init:205 ok.
[    3.438634@3] meson-mmc: amlmmc_dtb_init: register dtb chardev
[    3.438634@3] meson-mmc: calc f0b8bbc7, store f0b8bbc7
[    3.440357@3] meson-mmc: calc f0b8bbc7, store f0b8bbc7
[    3.440357@3] meson-mmc: total valid 2
[    3.440452@3] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
[    3.440452@3] meson-mmc: Exit aml_emmc_partition_ops OK.
[    3.471020@2] meson-mmc: meson_mmc_probe() : success!
[    3.471145@2] amlogic mtd driver init
[    3.471484@5] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc1
[    3.471812@5] cectx ff80023c.aocec: cec driver date:2019/6/13:early suspend not report pw status
[    3.471812@5]
[    3.471912@2] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
[    3.471914@2] cectx ff80023c.aocec: cecb_ver:0x1
[    3.471915@2] cectx ff80023c.aocec: line_reg:0x1
[    3.471917@2] cectx ff80023c.aocec: line_bit:0x3
[    3.471918@2] cectx ff80023c.aocec: ee_to_ao:0x1
[    3.471987@2] input: cec_input as /devices/virtual/input/input3
[    3.472056@5] cectx ff80023c.aocec: not find 'port_num'
[    3.472058@5] cectx ff80023c.aocec: using cec:1
[    3.472070@5] cectx ff80023c.aocec: no hdmirx regs
[    3.472071@5] cectx ff80023c.aocec: no hhi regs
[    3.472075@5] cectx ff80023c.aocec: not find 'output'
[    3.472080@5] cec: wake up flag:0
[    3.473521@5] cectx ff80023c.aocec: irq cnt:2
[    3.473655@5] cectx ff80023c.aocec: wakeup_reason:0x0
[    3.473712@5] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
[    3.473714@5] cectx ff80023c.aocec: aml_cec_probe success end
[    3.473828@5] unifykey: storage in base: 0xc5000000
[    3.473829@5] unifykey: storage out base: 0xc5040000
[    3.473830@5] unifykey: storage block base: 0xc5080000
[    3.473831@5] unifykey: probe done!
[    3.473981@5] unifykey: no efuse-version set, use default value: -1
[    3.473982@5] unifykey: key unify config unifykey-num is 16
[    3.474011@5] unifykey: key unify fact unifykey-num is 16
[    3.474013@5] unifykey: unifykey_devno: 1ef00000
[    3.474095@2] unifykey: device unifykeys created ok
[    3.474121@2] unifykey: aml_unifykeys_init done!
[    3.474153@2] meson ts init
[    3.474179@2] tsensor id: 0
[    3.474242@2] tsensor trim info: 0xfa00800b!
[    3.474244@2] tsensor hireboot: 0xc0ff2a80
[    3.474275@2] meson ts init
[    3.474284@2] tsensor id: 1
[    3.474323@2] tsensor trim info: 0xfa008002!
[    3.474325@2] tsensor hireboot: 0xc0ff2a80
[    3.474397@2] audio_dsp: [dsp]register dsp to char divece(257)
[    3.474482@5] amaudio: amaudio: driver amaudio init!
[    3.474677@2] amaudio: amaudio_init - amaudio: driver amaudio succuess!
[    3.474898@5] sysled: module init
[    3.475030@5] meson_wdt ffd0f0d0.watchdog: start watchdog
[    3.475032@5] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[    3.475152@5] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[    3.475400@2] amlogic rfkill init
[    3.475460@2] enter bt_probe of_node
[    3.475469@2] not get gpio_en
[    3.475475@2] power on valid level is high
[    3.475475@2] bt: power_on_pin_OD = 0;
[    3.475476@2] bt: power_off_flag = 1;
[    3.475477@2] dis power down = 0;
[    3.503072@2] BLASTER Driver Init
[    3.503332@2] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
[    3.503334@2] meson-saradc ff809000.saradc: set ticks per period to <1> by default.
[    3.504283@2] dmc_monitor_probe
[    3.504814@2] aml_atvdemod_init: OK, atv demod version: V2.04.
[    3.504886@2] defendkey ff630218.defendkey: Reserved memory is not enough!
[    3.504892@2] defendkey: probe of ff630218.defendkey failed with error -22
[    3.505053@5] usbcore: registered new interface driver snd-usb-audio
[    3.505541@5] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
[    3.505551@5] T9015 acodec used by auge, tdmout:1
[    3.506739@5] asoc debug: aml_audio_controller_probe-127
[    3.507414@5] asoc-aml-card auge_sound: aml_card_probe, parse error -517
[    3.507416@5] aml_card_probe error ret:-517
[    3.507630@5] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4
[    3.507643@5] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 0, lane_oe_mask_out = 0
[    3.507721@5] aml_tdm_platform_probe(), share en = 1
[    3.507721@5] No channel mask node Channel_Mask
[    3.507852@5] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4
[    3.507890@5] TDM id 1 samesource_sel:3
[    3.507893@5] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 1, lane_oe_mask_out = 0
[    3.508007@5] aml_tdm_platform_probe(), share en = 1
[    3.508007@5] No channel mask node Channel_Mask
[    3.508091@5] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
[    3.508102@5] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = 0, lane_oe_mask_out = 0
[    3.508191@5] aml_tdm_platform_probe(), share en = 1
[    3.508191@5] No channel mask node Channel_Mask
[    3.508685@5] hdmitx: audio: aout notify format CT_PCM
[    3.508687@5] hdmitx: hw: set audio
[    3.508688@5] hdmitx: hw: hdmitx tx_aud_src = 0
[    3.508700@5] hdmitx: fs = 3, cd = 6, tmds_clk = 0
[    3.508701@5] hdmitx: hw: aud_n_para = 6144
[    3.508708@5] hdmitx: hw: set channel status
[    3.508737@5] hdmitx: audio: Audio Type: PCM
[    3.508738@5] hdmitx: audio: set audio param
[    3.508746@5] aml_spdif_platform_probe, register soc platform
[    3.509053@5] audio_ddr_mngr: 0, irqs toddr 41, frddr 44
[    3.509054@5] audio_ddr_mngr: 1, irqs toddr 42, frddr 45
[    3.509055@5] audio_ddr_mngr: 2, irqs toddr 43, frddr 46
[    3.509207@5] loopback ff642000.audiobus:loopback@0: check whether to update loopback chipinfo
[    3.509225@5]        datain_src:4, datain_chnum:4, datain_chumask:f
[    3.509227@5]        datalb_src:1, datalb_chnum:2, datalb_chmask:3
[    3.509227@5]        datain_lane_mask:0x5, datalb_lane_mask:0x1
[    3.509367@5] loopback_platform_probe, p_loopback->id:0 register soc platform
[    3.509535@5] audiolocker_platform_probe
[    3.510201@2] Register vad
[    3.510356@2] GACT probability NOT on
[    3.510363@2] Mirror/redirect action on
[    3.510366@2] u32 classifier
[    3.510367@2]     Actions configured
[    3.510369@2] Netfilter messages via NETLINK v0.30.
[    3.510470@2] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.510593@2] ctnetlink v0.93: registering with nfnetlink.
[    3.510867@5] xt_time: kernel timezone is -0000
[    3.510909@5] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    3.511146@5] IPv4 over IPsec tunneling driver
[    3.521310@5] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.521425@5] arp_tables: arp_tables: (C) 2002 David S. Miller
[    3.535945@5] Initializing XFRM netlink socket
[    3.536133@5] NET: Registered protocol family 10
[    3.536607@5] mip6: Mobile IPv6
[    3.536619@5] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.553147@5] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.553574@5] NET: Registered protocol family 17
[    3.553582@5] NET: Registered protocol family 15
[    3.553594@5] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.553634@2] Bluetooth: RFCOMM TTY layer initialized
[    3.553643@2] Bluetooth: RFCOMM socket layer initialized
[    3.553654@2] Bluetooth: RFCOMM ver 1.11
[    3.553659@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.553659@2] Bluetooth: BNEP filters: protocol multicast
[    3.553663@2] Bluetooth: BNEP socket layer initialized
[    3.553664@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.553667@2] Bluetooth: HIDP socket layer initialized
[    3.553678@2] l2tp_core: L2TP core driver, V2.0
[    3.553682@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    3.553683@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    3.553690@2] l2tp_netlink: L2TP netlink interface
[    3.553704@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    3.553712@2] l2tp_debugfs: L2TP debugfs support
[    3.553713@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    3.553728@2] NET: Registered protocol family 35
[    3.553751@2] Key type dns_resolver registered
[    3.554706@2] Registering SWP/SWPB emulation handler
[    3.555019@2] registered taskstats version 1
[    3.767098@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
[    3.767102@2] snd_tdm ff642000.audiobus:tdmb: ASoC: Failed to add I2SIn CLK: -16
[    3.767103@2] aml_dai_tdm_probe, failed add snd tdm controls
[    3.767106@2] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
[    3.767108@2] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16
[    3.767109@2] aml_dai_tdm_probe, failed add snd tdm controls
[    3.767111@2] aml_dai_spdif_probe
[    3.767131@2] master_mode(1), binv(1), finv(0) out_skew(2), in_skew(3)
[    3.767535@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok
[    3.767564@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[    3.767859@2] asoc-aml-card auge_sound: multicodec <-> TDM-B mapping ok
[    3.767868@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[    3.768167@2] asoc-aml-card auge_sound: multicodec <-> TDM-C mapping ok
[    3.768485@2] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
[    3.768487@2]
[    3.768487@2] loopback_dai_set_sysclk, 0, 12288000, 0
[    3.768489@2] asoc loopback_dai_set_fmt, 0x4010, ec666110
[    3.768764@2] asoc-aml-card auge_sound: dummy <-> ff642000.audiobus:loopback@0 mapping ok
[    3.769564@2] snd_card_add_kcontrols card:ec68f010
[    3.769568@2] effect_v2 is not init
[    3.769570@2] Failed to add VAD controls
[    3.769577@2] eq/drc v1 function enable
[    3.795341@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[    3.797951@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.797960@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    3.798157@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
[    3.798182@2] xhci-hcd xhci-hcd.0.auto: irq 30, io mem 0xff500000
[    3.798497@5] hub 1-0:1.0: USB hub found
[    3.798511@5] hub 1-0:1.0: 2 ports detected
[    3.798676@5] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.798681@5] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    3.798711@5] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.798954@2] hub 2-0:1.0: USB hub found
[    3.798965@2] hub 2-0:1.0: 1 port detected
[    3.799310@2] i2c i2c-4: sensor_probe: kxtj3,ed33ca00
[    3.799778@2] sensors 4-000e: sensor_chip_init:kxtj3:devid=0x35,ops=0xc17690dc
[    3.801261@5] input: gsensor as /devices/platform/soc/ff800000.aobus/ff805000.i2c/i2c-4/4-000e/input/input4
[    3.802095@5] sensors 4-000e: sensor_irq_init:use polling,delay=30 ms
[    3.802152@2] sensors 4-000e: sensor_misc_device_register:miscdevice: accel
[    3.802154@2] sensors 4-000e: sensor_probe:initialized ok,sensor name:kxtj3,type:2,id=0
[    3.802154@2]
[    3.806937@3] khadas-rtc 4-0051: setting system clock to 2011-01-01 12:07:42 UTC (1293883662)
[    3.807138@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[    3.907281@2] dwc_otg: Core Release: 3.30a
[    3.907284@2] dwc_otg: Setting default values for core params
[    3.907291@2] dwc_otg: curmode: 0, host_only: 0
[    3.919443@2] dwc_otg: Using Buffer DMA mode
[    3.919445@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    3.919446@2] dwc_otg: Working on port type = SLAVE
[    3.919448@2] dwc_otg: Dedicated Tx FIFOs mode
[    3.920009@2] input: adc_keypad as /devices/platform/adc_keypad/input/input5
[    3.920242@5] lcd extern: key_valid: 0
[    3.920244@5] lcd extern: lcd_extern_get_config from dts
[    3.920248@5] lcd extern: lcd_extern_get_config_dts: invalid index
[    3.920265@5] lcd extern: aml_lcd_extern_probe ok
[    3.920495@5] bl: chip type/name: (6-g12b)
[    3.920497@5] bl: key_valid: 0
[    3.920497@5] bl: aml_bl_config_load from dts
[    3.920499@5] bl: load: backlight_0
[    3.920505@5] bl: bl pwm_port: PWM_F(5)
[    3.920508@5] bl: name              = backlight_pwm
[    3.920509@5] bl: method            = pwm(1)
[    3.920541@5] bl: register pwm_ch(5) 0xed0db630
[    3.920542@5] bl: aml_bl_pwm_channel_register ok
[    3.920702@2] bl: probe OK
[    3.921024@2] meson_cdev probe
[    3.921050@2] meson_cdev index: 0
[    3.921102@2] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[    3.921117@2] meson_cdev index: 1
[    3.921183@2] meson_cdev index: 2
[    3.921185@2] cpucore_cooling_register, max_cpu_core_num:6
[    3.921239@2] meson_cdev index: 3
[    3.921241@2] cpucore_cooling_register, max_cpu_core_num:6
[    3.921296@2] meson_cdev index: 4
[    3.921308@2] meson_cdev index: 5
[    3.921329@2] find tzd id: 0
[    3.921377@2] cpufreq_cooling_get_level: cpu:8 not part of any cooling device
[    3.921399@2] find tzd id: 0
[    3.921452@2] find tzd id: 0
[    3.921474@2] meson_cdev probe done
[    3.921537@2] gxbb_pm: enter meson_pm_probe!
[    3.921553@2] gxbb_pm: meson_pm_probe done
[    3.921726@2] ALSA device list:
[    3.921727@2]   #0: AML-AUGESOUND
[    4.122996@5] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    4.278815@5] hub 1-1:1.0:[    5.504992@5] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    5.615009@0] prepare_namespace() wait 79
[    5.615076@2] md: Waiting for all devices to be available before autodetect
[    5.620333@2] md: If you don't use raid, use raid=noautodetect
[    5.626474@5] md: Autodetecting RAID arrays.
[    5.630374@5] md: Scanned 0 and added 0 devices.
[    5.634973@5] md: autorun ...
[    5.637910@5] md: ... autorun DONE.
[    5.641857@5] EXT4-fs (mmcblk0p18): couldn't mount as ext3 due to feature incompatibilities
[    5.650030@5] EXT4-fs (mmcblk0p18): couldn't mount as ext2 due to feature incompatibilities
[    5.660306@0] EXT4-fs (mmcblk0p18): mounted filesystem without journal. Opts: (null)
[    5.665832@0] VFS: Mounted root (ext4 filesystem) readonly on device 179:18.
[    5.673147@0] devtmpfs: mounted
[    5.676661@0] Freeing unused kernel memory: 1024K
[    5.698772@0] init: init first stage started!
[    5.699546@0] init: Using Android DT directory /proc/device-tree/firmware/android/
[    5.708480@0] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
[    5.755147@0] EXT4-fs (mmcblk0p17): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[    5.759657@0] init: [libfs_mgr]__mount(source=/dev/block/odm,target=/odm,type=ext4)=0: Success
[    5.769920@0] EXT4-fs (mmcblk0p19): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[    5.778345@0] init: [libfs_mgr]__mount(source=/dev/block/product,target=/product,type=ext4)=0: Success
[    5.789494@0] EXT4-fs (mmcblk0p16): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[    5.797537@0] init: [libfs_mgr]__mount(source=/dev/block/vendor,target=/vendor,type=ext4)=0: Success
[    5.806672@0] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
[    5.813835@0] init: Loading SELinux policy
[    5.925423@0] audit: type=1403 audit(1293883664.616:2): policy loaded auid=4294967295 ses=4294967295
[    5.929118@0] selinux: SELinux: Loaded policy from /odm/etc/selinux/precompiled_sepolicy
[    5.929118@0]
[    5.945809@0] selinux: SELinux: Loaded file_contexts
[    5.945809@0]
[    5.949537@3] init: init second stage started!
[    5.965854@3] init: Using Android DT directory /proc/device-tree/firmware/android/
[    5.970414@3] selinux: SELinux: Loaded file_contexts
[    5.970414@3]
[    5.974407@3] init: Running restorecon...
[    5.981700@3] init: waitid failed: No child processes
[    5.986569@0] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
[    5.997955@0] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
[    6.004928@0] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 2564
[    6.011665@0] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 2565
[    6.018343@0] init: Parsing file /init.rc...
[    6.121384@2] ueventd: ueventd started!
[    6.123293@2] selinux: SELinux: Loaded file_contexts
[    6.123293@2]
[    6.126268@2] ueventd: Parsing file /ueventd.rc...
[    6.126601@5] mali_kbase: loading out-of-tree module taints kernel.
[    6.129040@5] mali ffe40000.bifrost: Continuing without Mali regulator control
[    6.129091@5] mali ffe40000.bifrost: max pp is 2
[    6.129093@5] mali ffe40000.bifrost: set min pp to default 1
[    6.129095@5] mali ffe40000.bifrost: min pp is 1
[    6.129096@5] mali ffe40000.bifrost: set min clk default to 0
[    6.129098@5] mali ffe40000.bifrost: min clk  is 0
[    6.129107@5] mali ffe40000.bifrost: hiu io source  0xf14f1000
[    6.129111@5] mali ffe40000.bifrost: hiu io source  0xf14f3000
[    6.129113@5] mali ffe40000.bifrost: num of pp used most of time 1
[    6.129115@5] mali ffe40000.bifrost: clock dvfs cfg table size is 6
[    6.129129@5] mali ffe40000.bifrost: max clk set 4
[    6.129131@5] mali ffe40000.bifrost: max clk  is 4
[    6.129132@5] mali ffe40000.bifrost: turbo clk set to 5
[    6.129134@5] mali ffe40000.bifrost: turbo clk  is 5
[    6.129135@5] mali ffe40000.bifrost: default clk set to 4
[    6.129136@5] mali ffe40000.bifrost: default clk  is 4
[    6.129139@5] mali ffe40000.bifrost: ====================0====================
[    6.129139@5] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
[    6.129142@5] mali ffe40000.bifrost: ====================1====================
[    6.129142@5] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
[    6.129144@5] mali ffe40000.bifrost: ====================2====================
[    6.129144@5] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
[    6.129147@5] mali ffe40000.bifrost: ====================3====================
[    6.129147@5] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
[    6.129149@5] mali ffe40000.bifrost: ====================4====================
[    6.129149@5] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    6.129151@5] mali ffe40000.bifrost: ====================5====================
[    6.129151@5] clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    6.129152@5] mali ffe40000.bifrost: clock dvfs table size is 6
[    6.129209@5] mali_plat=bf05d2d8
[    6.129396@5] find tzd id: 0
[    6.129424@5] gpu cooling register okay with err=0
[    6.129529@5] find tzd id: 0
[    6.129536@5] gpu core cooling register okay with err=0
[    6.129555@5] shader_present=3, tiler_present=1, l2_present=1
[    6.129638@5] Mali_pwr_on:gpu_irq : 200
[    6.129900@5] hrtimer: interrupt took 47608662873736 ns
[    6.130027@5] mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0
[    6.130474@5] mali ffe40000.bifrost: Using coherency mode 0 set from dtb
[    6.136106@0] mali ffe40000.bifrost: Probed as mali0
[    6.139184@0] PPMGRVPP: info: RegisterTB_Function: gfunc   (null), func: bf08e024, ver:TB detect: v2016.11.15a *** [ Tue Mar 19 19:21:39 CST 2019]-[ renjiang.han]-[* master]-[67f03d41e0612a58d1edd96db9bc8b92de1a59b1]-[Date: Wed Jul 4 00:44:57 2018 +0800]-[2]
[    6.415179@0] ueventd: Parsing file /vendor/ueventd.rc...
[    6.419820@0] ueventd: /vendor/ueventd.rc: 109: /sys/ lines must have 5 entries
[    6.426210@0] ueventd: Parsing file /odm/ueventd.rc...
[    6.431320@0] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[    6.441178@0] ueventd: Parsing file /ueventd.amlogic.rc...
[    6.446617@0] ueventd: Unable to read config file '/ueventd.amlogic.rc': open() failed: No such file or directory
[    6.675560@2] ueventd: Coldboot took 0.216 seconds
[    6.692970@0] audit: type=1400 audit(1293883665.384:3): avc:  denied  { write } for  pid=1 comm="init" name="alignment" dev="proc" ino=4026531980 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
[    6.706947@0] audit: type=1400 audit(1293883665.396:4): avc:  denied  { open } for  pid=1 comm="init" path="/proc/cpu/alignment" dev="proc" ino=4026531980 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
[    6.750740@3] audit: type=1400 audit(1293883665.440:5): avc:  denied  { write } for  pid=2564 comm="init" name="watermark_scale_factor" dev="proc" ino=2420 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_vm_writable:s0 tclass=file permissive=1
[    6.785562@1] EXT4-fs (mmcblk0p20): Ignoring removed nomblk_io_submit option
[    7.133416@2] EXT4-fs (mmcblk0p20): 5 orphan inodes deleted
[    7.133445@2] EXT4-fs (mmcblk0p20): recovery complete
[    7.145927@2] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    7.257706@0] audit: type=1400 audit(1293883665.948:6): avc:  denied  { read } for  pid=3132 comm="imageserver" name="vndbinder" dev="tmpfs" ino=2334 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
[    7.274065@0] audit: type=1400 audit(1293883665.964:7): avc:  denied  { write } for  pid=3132 comm="imageserver" name="vndbinder" dev="tmpfs" ino=2334 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
[    7.296042@0] audit: type=1400 audit(1293883665.988:8): avc:  denied  { open } for  pid=3132 comm="imageserver" path="/dev/vndbinder" dev="tmpfs" ino=2334 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
[    7.318079@3] audit: type=1400 audit(1293883666.012:9): avc:  denied  { ioctl } for  pid=3132 comm="imageserver" path="/dev/vndbinder" dev="tmpfs" ino=2334 ioctlcmd=0x6209 scontext=u:r:imageserver:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file permissive=1
[    7.654312@2] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
[    7.654312@2]
[    7.655053@2] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[    7.655053@2]
[    7.662672@2] e2fsck: Pass 2: Checking directory structure
[    7.662672@2]
[    7.669820@2] e2fsck: Pass 3: Checking directory connectivity
[    7.669820@2]
[    7.677159@2] e2fsck: Pass 4: Checking reference counts
[    7.677159@2]
[    7.683985@2] e2fsck: Pass 5: Checking group summary information
[    7.683985@2]
[    7.691608@2] e2fsck: /dev/block/data: 5731/1692432 files (9.9% non-contiguous), 344429/6768128 blocks
[    7.691608@2]
[    7.703630@5] EXT4-fs (mmcblk0p20): Ignoring removed nomblk_io_submit option
[    7.715025@0] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    7.722270@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[    7.731387@0] EXT4-fs (mmcblk0p3): recovery complete
[    7.733189@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    7.797282@0] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
[    7.797282@0]
[    7.798088@0] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[    7.798088@0]
[    7.805693@0] e2fsck: Pass 2: Checking directory structure
[    7.805693@0]
[    7.813660@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[    7.825394@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    7.832573@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[    7.845591@0] EXT4-fs (mmcblk0p13): recovery complete
[    7.846050@0] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    7.912718@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[    7.919751@0] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    7.963758@0] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
[    7.971149@0] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    8.014001@0] EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option
[    8.021193@0] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[    8.027589@0] init: 27 output lines suppressed due to ratelimiting
[    8.041060@5] No find node.
[    8.041082@5] register clk_set_setting cpu[46]
[    8.048410@5] Registered firmware driver success.
[    8.049264@5] Try to load video/h264_enc.bin  ...
[    8.053627@5] load firmware size : 76288, Name : video/h264_enc.bin.
[    8.058527@5] the fw pack ver v0.0 is too lower.
[    8.063089@5] it may work abnormally so need to be update in time.
[    8.069577@5] Try to load video/video_ucode.bin  ...
[    8.084997@5] load firmware size : 1706240, Name : video/video_ucode.bin.
[    8.086243@5] the fw pack ver v0.2 is too lower.
[    8.090755@5] it may work abnormally so need to be update in time.
[    8.131949@5] Amlogic A/V streaming port init
[    8.133597@5] get gate demux control ok ec237f00
[    8.135304@5] get gate parser_top control ok ec237f80
[    8.140331@5] get gate vdec control ok ec237dc0
[    8.144812@5] get gate clk_81 control failed   (null)
[    8.149856@5] get gate clk_vdec_mux control ok ec237c00
[    8.155078@5] get gate clk_hcodec_mux control ok ec237880
[    8.160438@5] get gate clk_hevc_mux control ok ec237500
[    8.165639@5] get gate clk_hevcb_mux control ok ec237180
[    8.170920@5] get gate ahbarb0 control ok ec21af80
[    8.175660@5] get gate asyncfifo control failed   (null)
[    8.200478@3] ammvdec_h264 module init
[    8.227579@5] ammvdec_mpeg12 module init
[    8.234732@5] ammvdec_mpeg4_driver_init_module
[    8.259570@5] amvenc_avc_probe -- reserved memory config fail.
[    8.259756@5] amvenc_avc - cma memory pool size: 60 MB
[    8.264918@5] encode_wq_init.
[    8.267840@5] encode start monitor.
[    8.271385@4] encode workqueue monitor start.
[    8.279295@5] vpu_init
[    8.279453@5] vpu_probe
[    8.280380@5] HevcEnc reserved memory config fail.
[    8.285159@5] HevcEnc - cma memory pool size: 64 MB
[    8.290035@5] HevcEnc - wave420l_irq: 65
[    8.293946@5] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xf2568000
[    8.304274@0] success to probe vpu device with video memory from cma
[    8.323117@5] audit: type=1400 audit(1293883667.016:10): avc:  denied  { setattr } for  pid=1 comm="init" name="slabinfo" dev="proc" ino=4026532027 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=1
[    8.365072@1] logd.auditd: start
[    8.365118@1] logd.klogd: 8098125127
[    8.457920@3] type=1400 audit(1293883667.148:11): avc: denied { setattr } for pid=2564 comm="init" name="droidota" dev="mmcblk0p20" ino=1438982 scontext=u:r:vendor_init:s0 tcontext=u:object_r:update_data_file:s0 tclass=dir permissive=1
[    8.473281@3] type=1400 audit(1293883667.148:11): avc: denied { setattr } for pid=2564 comm="init" name="droidota" dev="mmcblk0p20" ino=1438982 scontext=u:r:vendor_init:s0 tcontext=u:object_r:update_data_file:s0 tclass=dir permissive=1
[    8.493975@3] type=1400 audit(1293883667.148:12): avc: denied { setattr } for pid=2564 comm="init" name="log" dev="mmcblk0p20" ino=523269 scontext=u:r:vendor_init:s0 tcontext=u:object_r:log_file:s0 tclass=dir permissive=1
[    8.513820@3] type=1400 audit(1293883667.148:12): avc: denied { setattr } for pid=2564 comm="init" name="log" dev="mmcblk0p20" ino=523269 scontext=u:r:vendor_init:s0 tcontext=u:object_r:log_file:s0 tclass=dir permissive=1
[    8.533153@3] type=1400 audit(1293883667.184:13): avc: denied { setattr } for pid=2564 comm="init" name="media" dev="mmcblk0p20" ino=392452 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
[    8.569729@2] reg resource 2, start: -10239732,end: -10239729
[    8.569833@2] reg resource 3, start: -10239728,end: -10239725
[    8.575634@2] reg resource 4, start: -3141496,end: -3141493
[    8.581155@2] galcore irq number is 52.
[    8.584994@2] Galcore version 6.3.3.210826
[    8.589001@2] Galcore options:
[    8.592022@2]   irqLine           = 52
[    8.595755@2]   registerMemBase   = 0xFF100000
[    8.600175@2]   registerMemSize   = 0x00000800
[    8.604592@2]   contiguousSize    = 0x00400000
[    8.609007@2]   contiguousBase    = 0x00000000
[    8.613431@2]   externalSize      = 0x00000000
[    8.617893@2]   externalBase      = 0x00000000
[    8.622274@2]   bankSize          = 0x00000000
[    8.626688@2]   fastClear         = -1
[    8.630419@2]   compression       = 15
[    8.634140@2]   powerManagement   = 1
[    8.637784@2]   baseAddress       = 0x00000000
[    8.642199@2]   physSize          = 0x00000000
[    8.646641@2]   recovery          = 1
[    8.650302@2]   stuckDump         = 0
[    8.653906@2]   gpuProfiler       = 0
[    8.657540@2]   userClusterMask   = 0x0
[    8.661357@2]   smallBatch        = 1
[    8.664993@2]   irqs              = 52, -1, -1, -1, -1, -1, -1, -1, -1, -1,
[    8.672009@2]   registerBases     = 0xFF100000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[    8.685962@2]   registerSizes     = 0x00000800, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
[    8.699915@2]   chipIDs           = 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
[    8.713869@2]   core 0 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFF000000, 0xFFFFFFFFFFFFFFFF,
[    8.721842@2]   core 1 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.730508@2]   core 2 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.739175@2]   core 3 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.747842@2]   core 4 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.756508@2]   core 5 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.765175@2]   core 6 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.773842@2]   core 7 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.782509@2]   core 8 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.791175@2]   core 9 sRAMBases = 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF,
[    8.799842@2] Build options:
[    8.802702@2]   gcdGPU_TIMEOUT    = 20000
[    8.806696@2]   gcdGPU_2D_TIMEOUT = 4000
[    8.810634@2]   gcdINTERRUPT_STATISTIC = 1
[    8.816110@4] Galcore ContiguousBase=0x2a400000 ContiguousSize=0x400000
[    8.821258@4] _setpower,control status:1
[    8.825159@4] ====>>>>poweron in _SetPower
[    8.833451@0] Galcore Info: MMU mapped core 0 SRAM[1] base=0xff000000 size=0x100000
[    8.836890@0] Galcore Info: MMU mapped core 0 SRAM[1] hardware address=0xff000000 size=0x100000
[    8.852352@0] _setpower,control status:0
[    8.852372@0] ====>>>>poweroff in _SetPower
[    8.864211@5] iq name from dts config is ----> imx290
[    8.975518@0] arm_isp ff140000.isp: assigned reserved memory node linux,isp_cma
[    8.977207@0] AM_SC: am_sc_parse_dt: rs idx info: name: isp_sc
[    8.983270@0] AM_SC: am_sc_parse_dt:rs info: irq: 73
[    9.018328@3] logd.daemon: reinit
[    9.170673@4] healthd: BatteryTemperaturePath not found
[    9.170708@4] healthd: BatteryCycleCountPath not found
[    9.190115@5] android.hardware.health@2.0-impl: wakealarm_init: timerfd_create failed
[    9.193334@5] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
[    9.221813@4] unifykey: amlkey_init_gen() enter!
[    9.244059@4] hdmitx: system: set hdcp_pwr 1
[    9.285841@5] type=1400 audit(1293883667.184:14): avc: denied { setattr } for pid=2564 comm="init" name="media" dev="mmcblk0p20" ino=392452 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
[    9.286286@2] fb: osd_open, 1497, fb_index=0,fb_rmem_size=26738688
[    9.286340@2] fb: osd_open, 1497, fb_index=1,fb_rmem_size=1048576
[    9.286355@2] fb: osd_open, 1497, fb_index=2,fb_rmem_size=1048576
[    9.286435@2] fb: vpu clkc clock is 199 MHZ
[    9.286444@2] fb: osd_open, 1497, fb_index=3,fb_rmem_size=8388608
[    9.329467@5] type=1400 audit(1293883667.976:15): avc: denied { read } for pid=3351 comm="android.hardwar" name="u:object_r:default_prop:s0" dev="tmpfs" ino=2225 scontext=u:r:hal_neuralnetworks_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1
[    9.381605@2] emmc_key_read:114, read ok
[    9.381637@2] unifykey: amlkey_init_gen() storagekey_info.buffer=c5080000, storagekey_info.size = 40000!
[    9.392452@2] vfm_map_store:rm default
[    9.393385@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    9.402882@5] file system registered
[    9.406003@2] assign_ffs_buffer FFS_BUFFER_MAX=100!!!
[    9.410818@5] hdmitx: system: restore hdcp_pwr 0
[    9.418692@0] hdmitx: system: sname = 1080p60hz
[    9.418724@0] hdmitx: system: char_clk = 148500
[    9.422237@0] hdmitx: system: cd = 6
[    9.425827@0] hdmitx: system: cs = 2
[    9.429300@0] hdmitx: RX tmds clk: 225   Calc clk: 222
console:/ $ [    9.475572@5] vout: vout_io_open
[    9.552582@0] read descriptors
[    9.552622@0] read strings
[    9.581408@4] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
[    9.582724@4] audit: rate limit exceeded
[    9.671906@0] [DI] load 0x3e00 pq table len 426 later.
[    9.759641@0] USB RESET
[    9.911952@0] android_work: sent uevent USB_STATE=CONNECTED
[    9.915419@0] USB RESET
[    9.937888@2] vout: vout_io_open
[    9.937914@2] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
[    9.941073@2] vout: vout_io_release
[    9.957152@4] avc open
[    9.957173@4] amvenc_avc  check CMA pool success, max instance: 3.
[    9.960882@4] allocating phys 0xcfc00000, size 20480k, wq:ea836000.
[    9.966302@4] amvenc_avc  memory config success, buff start:0xcfc00000, size is 0x1400000, wq:ea836000.
[    9.975726@4] avc release, wq:ea836000
[    9.979364@4] remove  encode_work_queue ea836000 success, _destroy_encode_work_queue line 3513.
[    9.988270@4] [+] vpu_open
[    9.991872@4] allocating phys 0xcfc00000, virt addr 0x0, size 65536k
[    9.997287@4] [-] vpu_open, ret: 0
[   10.000458@4] vpu_release
[   10.003026@4] vpu_free_buffers
[   10.006047@4] vpu_free_instances
[   10.008822@5] aml_tdm_open
[   10.010083@2] aml_tdm_open
[   10.010462@2] aml_spdif_open
[   10.010635@5] aml_spdif_close
[   10.010783@2] aml_tdm_open
[   10.011207@5] loopback_dai_startup
[   10.011383@2] loopback_dai_shutdown
[   10.030022@4] vpu_release, s_video_memory 0xcfc00000
[   10.046914@2] cectx ff80023c.aocec: init_cec_port_info phy_addr:1000, port num:1
[   10.049260@2] cectx ff80023c.aocec: port_seq=0x0
[   10.053569@2] cectx ff80023c.aocec: portinfo id:0 arc:0 phy:1100,type:0
[   10.079027@0] configfs-gadget gadget: high-speed config #1: b
[   10.079759@0] android_work: sent uevent USB_STATE=CONFIGURED
[   10.084965@0] Unable to handle kernel NULL pointer dereference at virtual address 0000007d
[   10.084969@0] pgd = c0104000
[   10.084973@0] [0000007d] *pgd=00000000
[   10.084979@0] Internal error: Oops: 805 [#1] PREEMPT SMP ARM
[   10.085014@0] Modules linked in: iv009_isp(O) iv009_isp_sensor(O) iv009_isp_lens(O) iv009_isp_iq(O) galcore(O) vpu(O) encoder(O) amvdec_avs2(O) amvdec_vp9(O) amvdec_vc1(O) amvdec_real(O) amvdec_mmpeg4(O) amvdec_mpeg4(O) amvdec_mmpeg12(O) amvdec_mpeg12(O) amvdec_mmjpeg(O) amvdec_mjpeg(O) amvdec_h265(O) amvdec_h264mvc(O) amvdec_mh264(O) amvdec_h264(O) amvdec_avs(O) stream_input(O) decoder_common(O) firmware(O) media_clock(O) tb_detect(O) mali_kbase(O)
[   10.085019@0] CPU: 0 PID: 1587 Comm: kworker/0:1 Tainted: G           O    4.9.113 #4
[   10.085021@0] Hardware name: Generic DT based system
[   10.085034@0] Workqueue: events android_work
[   10.085036@0] task: ed1f6000 task.stack: bc12e000
[   10.085041@0] PC is at memset+0xd0/0xe0
[   10.085044@0] LR is at acc_ctrlrequest+0x274/0x5e4
[   10.085048@0] pc : [<c05da910>]    lr : [<c08017ac>]    psr: 80030193
[   10.085048@0] sp : c19799f0  ip : c1979a20  fp : c1979a1c
[   10.085050@0] r10: 00000000  r9 : ec7665bc  r8 : edb49008
[   10.085052@0] r7 : ec7666bc  r6 : 00000002  r5 : 00000000  r4 : ec766660
[   10.085054@0] r3 : 00000001  r2 : 00000000  r1 : 000000fc  r0 : 0000007d
[   10.085057@0] Flags: Nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   10.085059@0] Control: 10c5383d  Table: 29f3006a  DAC: 00000051
[   10.085061@0]
[   10.085061@0] PC: 0xc05da890:
[   10.085073@0] a890  18ac410a e3120010 18ac410a e8bd4100 e3120008 18ac000a e3120004 148c1004
[   10.085084@0] a8b0  e3120002 14cc1001 14cc1001 e3120001 14cc1001 e12fff1e e2522004 bafffff7
[   10.085095@0] a8d0  e3530002 b4cc1001 d4cc1001 e4cc1001 e0822003 eaffffd8 00000000 00000000
[   10.085105@0] a8f0  00000000 00000000 00000000 00000000 00000000 e2511004 ba00001d e3530002
[   10.085116@0] a910  b4c02001 d4c02001 e4c02001 e0811003 e3a02000 e2103003 1afffff5 e3510010
[   10.085127@0] a930  ba00000f e52de004 e1a0c002 e1a0e002 e2511040 a8a0500c a8a0500c a8a0500c
[   10.085139@0] a950  a8a0500c cafffff9 08bd8000 e3110020 18a0500c 18a0500c e3110010 18a0500c
[   10.085150@0] a970  e49de004 e3110008 18a0000c e3110004 14802004 e3110002 14c02001 14c02001
[   10.085151@0]
[   10.085151@0] LR: 0xc080172c:
[   10.085162@0] 172c  e1570003 1a000003 ea0000ee e5933010 e1570003 0a0000eb e5923000 e1500003
[   10.085173@0] 174c  e1a02003 1afffff8 e1a00006 e3e05015 eb1c3daa eaffff85 e5857688 e30130b4
[   10.085184@0] 176c  e5902004 e34c3080 e1a00006 e582301c eaffffb1 e5902004 e3a06002 e30130b4
[   10.085195@0] 178c  e3a01c01 e34c3080 e285007d e5922000 e1c260b0 e5942004 e582301c ebf7645c
[   10.085206@0] 17ac  e2850f5f e3a01c01 e2800001 ebf76458 e2850f9f e3a01c01 e2800001 ebf76454
[   10.085217@0] 17cc  e2850fdf e3a01c01 e2800001 ebf76450 e2850e47 e3a01c01 e280000d ebf7644c
[   10.085228@0] 17ec  e2850e57 e3a01c01 e280000d ebf76448 e3a03000 e1a00006 e5853684 e5853688
[   10.085239@0] 180c  eaffff8d e30535c4 e3a00001 e34c3170 e2852e6b e5931000 e282200c e5850684
[   10.085241@0]
[   10.085241@0] SP: 0xc1979970:
[   10.085252@0] 9970  c0beab44 c1979980 ec72e7c0 c05da910 80030193 ffffffff c1977db4 edb49008
[   10.085262@0] 9990  c1979a1c c19799a0 c020f028 c02012fc 0000007d 000000fc 00000000 00000001
[   10.085273@0] 99b0  ec766660 00000000 00000002 ec7666bc edb49008 ec7665bc 00000000 c1979a1c
[   10.085284@0] 99d0  c1979a20 c19799f0 c08017ac c05da910 80030193 ffffffff 00000051 bc000000
[   10.085295@0] 99f0  00000000 ec76656c c1979a90 ec766660 ec7666bc edb49008 ec7665bc 00000000
[   10.085306@0] 9a10  c1979a4c c1979a20 c07ef980 c0801544 c07ef8d8 edbc0000 c19141b4 c1979a98
[   10.085317@0] 9a30  ec65cc00 00000001 c1979a90 00000000 c1979a5c c1979a50 c0993ef0 c07ef8e4
[   10.085328@0] 9a50  c1979aec c1979a60 c0999790 c0993ebc c1979a8c c1979a70 c0243580 c0be9654
[   10.085329@0]
[   10.085329@0] IP: 0xc19799a0:
[   10.085340@0] 99a0  0000007d 000000fc 00000000 00000001 ec766660 00000000 00000002 ec7666bc
[   10.085351@0] 99c0  edb49008 ec7665bc 00000000 c1979a1c c1979a20 c19799f0 c08017ac c05da910
[   10.085362@0] 99e0  80030193 ffffffff 00000051 bc000000 00000000 ec76656c c1979a90 ec766660
[   10.085373@0] 9a00  ec7666bc edb49008 ec7665bc 00000000 c1979a4c c1979a20 c07ef980 c0801544
[   10.085383@0] 9a20  c07ef8d8 edbc0000 c19141b4 c1979a98 ec65cc00 00000001 c1979a90 00000000
[   10.085394@0] 9a40  c1979a5c c1979a50 c0993ef0 c07ef8e4 c1979aec c1979a60 c0999790 c0993ebc
[   10.085405@0] 9a60  c1979a8c c1979a70 c0243580 c0be9654 c191b9b0 c191d9a8 00000000 00000000
[   10.085416@0] 9a80  40080010 c1979a90 c0a2079c c0243528 000033c0 00020000 5f305045 454c4449
[   10.085417@0]
[   10.085417@0] FP: 0xc197999c:
[   10.085428@0] 999c  c02012fc 0000007d 000000fc 00000000 00000001 ec766660 00000000 00000002
[   10.085439@0] 99bc  ec7666bc edb49008 ec7665bc 00000000 c1979a1c c1979a20 c19799f0 c08017ac
[   10.085450@0] 99dc  c05da910 80030193 ffffffff 00000051 bc000000 00000000 ec76656c c1979a90
[   10.085461@0] 99fc  ec766660 ec7666bc edb49008 ec7665bc 00000000 c1979a4c c1979a20 c07ef980
[   10.085472@0] 9a1c  c0801544 c07ef8d8 edbc0000 c19141b4 c1979a98 ec65cc00 00000001 c1979a90
[   10.085483@0] 9a3c  00000000 c1979a5c c1979a50 c0993ef0 c07ef8e4 c1979aec c1979a60 c0999790
[   10.085493@0] 9a5c  c0993ebc c1979a8c c1979a70 c0243580 c0be9654 c191b9b0 c191d9a8 00000000
[   10.085504@0] 9a7c  00000000 40080010 c1979a90 c0a2079c c0243528 000033c0 00020000 5f305045
[   10.085506@0]
[   10.085506@0] R4: 0xec7665e0:
[   10.085517@0] 65e0  00000000 00000000 00000000 eb99d600 00000005 c07efb50 c07efae4 c07ef8d8
[   10.085528@0] 6600  c07f0cbc c07eba7c c07ebb18 c07f0cbc c1375930 00000000 00000000 00000000
[   10.085538@0] 6620  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   10.085549@0] 6640  00000000 00000000 00000000 00000000 e9f17c40 00000000 00000000 00000001
[   10.085560@0] 6660  edb49008 e9f17c00 00000000 eb9b5aa8 00000000 00000000 00000000 00000000
[   10.085571@0] 6680  eb9b5aa8 00011202 00000002 4018d140 0102234e 00010302 eb9b5ac8 eb9b5ac8
[   10.085581@0] 66a0  e9f17bc0 e9f17b80 ec7665c4 00000005 00000000 00000000 00000000 001a001a
[   10.085592@0] 66c0  00000000 00000000 00000000 00000000 00000000 00000101 00000000 ec7666dc
[   10.085594@0]
[   10.085594@0] R7: 0xec76663c:
[   10.085604@0] 663c  00000000 00000000 00000000 00000000 00000000 e9f17c40 00000000 00000000
[   10.085615@0] 665c  00000001 edb49008 e9f17c00 00000000 eb9b5aa8 00000000 00000000 00000000
[   10.085626@0] 667c  00000000 eb9b5aa8 00011202 00000002 4018d140 0102234e 00010302 eb9b5ac8
[   10.085637@0] 669c  eb9b5ac8 e9f17bc0 e9f17b80 ec7665c4 00000005 00000000 00000000 00000000
[   10.085647@0] 66bc  001a001a 00000000 00000000 00000000 00000000 00000000 00000101 00000000
[   10.085658@0] 66dc  ec7666dc ec7666dc c07f07ac 00000000 00000000 00000000 00000000 00000000
[   10.085668@0] 66fc  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   10.085679@0] 671c  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   10.085680@0]
[   10.085680@0] R8: 0xedb48f88:
[   10.085691@0] 8f88  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   10.085702@0] 8fa8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   10.085712@0] 8fc8  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   10.085723@0] 8fe8  00000000 00000000 00000000 00000000 00000000 00000000 edbc0000 00000000
[   10.085733@0] 9008  00000000 edb4900c edb4900c c07f2f6c ec73d000 c1085bbc edb491fc edb49234
[   10.085744@0] 9028  edb495d0 00000003 00000003 00000007 c1795368 00000000 ed045610 ec72f580
[   10.085755@0] 9048  c1375b68 ec73d014 ed04561c ed045618 eda21040 c1757290 ec730af0 00000002
[   10.085766@0] 9068  00000003 00000000 00000000 00000001 00000000 edb4907c edb4907c 00000000
[   10.085767@0]
[   10.085767@0] R9: 0xec76653c:
[   10.085778@0] 653c  ec7664e8 ec766544 645f736f 00637365 00000000 00000000 00000000 00000002
[   10.085789@0] 655c  ec766434 ec76650c ec766400 ec766400 c1766538 ebf24440 ec766574 ec766574
[   10.085800@0] 657c  c1766450 ec766580 ec766580 ec766440 ec766538 00000001 00000000 ec766598
[   10.085811@0] 659c  ec766598 00000000 00000000 eabc00c0 00000000 00000000 eabc013c eabc013c
[   10.085822@0] 65bc  e9f07bd0 eb9b7150 eb99d600 00000000 00000000 00000005 00000000 c07efef0
[   10.085832@0] 65dc  c07efef0 00000000 00000000 00000000 eb99d600 00000005 c07efb50 c07efae4
[   10.085843@0] 65fc  c07ef8d8 c07f0cbc c07eba7c c07ebb18 c07f0cbc c1375930 00000000 00000000
[   10.085853@0] 661c  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   10.085856@0] Process kworker/0:1 (pid: 1587, stack limit = 0xbc12e000)
[   10.085858@0] Stack: (0xc19799f0 to 0xbc130000)
[   10.085864@0] [c1979a1c+  48][<c08017ac>] acc_ctrlrequest+0x274/0x5e4
[   10.085871@0] [c1979a4c+  48][<c07ef980>] android_setup+0xa8/0x138
[   10.085878@0] [c1979a5c+  16][<c0993ef0>] _setup+0x40/0x98
[   10.085884@0] [c1979aec+ 144][<c0999790>] handle_ep0+0xc8c/0x17b0
[   10.085889@0] [c1979b64+ 120][<c099c3bc>] dwc_otg_pcd_handle_out_ep_intr+0x1754/0x1bac
[   10.085894@0] [c1979b94+  48][<c099f990>] dwc_otg_pcd_handle_intr+0x170/0x2ec
[   10.085898@0] [c1979ba4+  16][<c099475c>] dwc_otg_pcd_irq+0x1c/0x28
[   10.085905@0] [c1979bf4+  80][<c029a360>] __handle_irq_event_percpu+0xc4/0x2ac
[   10.085911@0] [c1979c14+  32][<c029a574>] handle_irq_event_percpu+0x2c/0x68
[   10.085915@0] [c1979c34+  32][<c029a5f8>] handle_irq_event+0x48/0x6c
[   10.085920@0] [c1979c54+  32][<c029e044>] handle_fasteoi_irq+0xe0/0x1b0
[   10.085925@0] [c1979c64+  16][<c0299420>] generic_handle_irq+0x34/0x44
[   10.085930@0] [c1979c94+  48][<c0299a20>] __handle_domain_irq+0x8c/0xfc
[   10.085935@0] [c1979cbc+  40][<c02015d0>] gic_handle_irq+0x48/0x84
[   10.085941@0] [c1979d70+ 180][<c020f0e4>] __irq_svc+0x84/0xc4
[   10.085945@0] [c1979d70+  96][<c02017fc>] __do_softirq+0xc4/0x3e0
[   10.085950@0] [c1979d80+  16][<c02300b0>] irq_exit+0xe0/0x11c
[   10.085955@0] [c1979db0+  48][<c0299a24>] __handle_domain_irq+0x90/0xfc
[   10.085958@0] [c1979dd8+  40][<c02015d0>] gic_handle_irq+0x48/0x84
[   10.085962@0] [bc12fbd4+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   10.085966@0] [bc12fbd4+ 120][<c0297a40>] console_unlock+0x2fc/0x628
[   10.085970@0] [bc12fc34+  96][<c0298024>] vprintk_emit+0x2b8/0x460
[   10.085974@0] [bc12fc4c+  24][<c029837c>] vprintk_default+0x30/0x38
[   10.085980@0] [bc12fc6c+  32][<c033d210>] printk+0x88/0x90
[   10.085985@0] [bc12fcbc+  64][<c07f096c>] android_work+0x1c0/0x224
[   10.085991@0] [bc12fcfc+  64][<c024589c>] process_one_work+0x200/0x624
[   10.085996@0] [bc12fd3c+  64][<c02467f8>] worker_thread+0x58/0x5c4
[   10.086001@0] [bc12fd94+  88][<c024bff4>] kthread+0x128/0x144
[   10.086007@0] [00000000+   0][<c02087d0>] ret_from_fork+0x14/0x44
[   10.086012@0] Code: 00000000 e2511004 ba00001d e3530002 (b4c02001)
[   10.086016@0] ---[ end trace 458915ea503c6bd3 ]---
[   10.094180@0] Kernel panic - not syncing: Fatal exception in interrupt
[   10.094212@3] CPU3: stopping
[   10.094217@3] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D    O    4.9.113 #4
[   10.094218@3] Hardware name: Generic DT based system
[   10.094229@3] [ed98bd68+  16][<c020e3c0>] show_stack+0x20/0x24
[   10.094234@3] [ed98bd88+  32][<c05db76c>] dump_stack+0x90/0xac
[   10.094239@3] [ed98bdb0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   10.094242@3] [ed98bdd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   10.094245@3] [bc01dd84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   10.094248@3] [bc01dd84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   10.094252@3] [bc01dd94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   10.094257@3] [bc01ddc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   10.094261@3] [bc01dddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   10.094264@2] CPU2: stopping
[   10.094266@2] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D    O    4.9.113 #4
[   10.094267@2] Hardware name: Generic DT based system
[   10.094271@2] [ed8fbd68+  16][<c020e3c0>] show_stack+0x20/0x24
[   10.094274@2] [ed8fbd88+  32][<c05db76c>] dump_stack+0x90/0xac
[   10.094276@2] [ed8fbdb0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   10.094278@2] [ed8fbdd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   10.094280@2] [bc01bd84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   10.094283@2] [bc01bd84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   10.094285@2] [bc01bd94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   10.094288@2] [bc01bdc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   10.094290@2] [bc01bddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   10.094292@5] CPU5: stopping
[   10.094294@5] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G      D    O    4.9.113 #4
[   10.094295@5] Hardware name: Generic DT based system
[   10.094299@5] [ed9c3d68+  16][<c020e3c0>] show_stack+0x20/0x24
[   10.094302@5] [ed9c3d88+  32][<c05db76c>] dump_stack+0x90/0xac
[   10.094304@5] [ed9c3db0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   10.094306@5] [ed9c3dd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   10.094308@5] [bc021d84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   10.094311@5] [bc021d84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   10.094313@5] [bc021d94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   10.094315@5] [bc021dc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   10.094318@5] [bc021ddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   10.094320@4] CPU4: stopping
[   10.094322@4] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G      D    O    4.9.113 #4
[   10.094323@4] Hardware name: Generic DT based system
[   10.094326@4] [ed9bbd68+  16][<c020e3c0>] show_stack+0x20/0x24
[   10.094329@4] [ed9bbd88+  32][<c05db76c>] dump_stack+0x90/0xac
[   10.094332@4] [ed9bbdb0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   10.094334@4] [ed9bbdd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   10.094336@4] [bc01fd84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   10.094338@4] [bc01fd84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   10.094341@4] [bc01fd94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   10.094343@4] [bc01fdc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   10.094345@4] [bc01fddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   10.094351@1] CPU1: stopping
[   10.094356@1] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D    O    4.9.113 #4
[   10.094358@1] Hardware name: Generic DT based system
[   10.094368@1] [ed8e3d68+  16][<c020e3c0>] show_stack+0x20/0x24
[   10.094374@1] [ed8e3d88+  32][<c05db76c>] dump_stack+0x90/0xac
[   10.094379@1] [ed8e3db0+  40][<c0212258>] handle_IPI+0x378/0x38c
[   10.094384@1] [ed8e3dd8+  40][<c0201608>] gic_handle_irq+0x80/0x84
[   10.094388@1] [bc019d84+   0][<c020f0e4>] __irq_svc+0x84/0xc4
[   10.094393@1] [bc019d84+  16][<c0209524>] arch_cpu_idle+0x38/0x50
[   10.094398@1] [bc019d94+  16][<c0f107d8>] default_idle_call+0x34/0x48
[   10.094403@1] [bc019dc4+  48][<c0282624>] cpu_startup_entry+0x1cc/0x264
[   10.094407@1] [bc019ddc+  24][<c0211c6c>] secondary_start_kernel+0x16c/0x178
[   11.436027@0] Rebooting in 5 seconds..

---------- 2020-08-20 19:11:49 +0800: Disconnected ----------