Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # 2024-04-24 15:20:29 by RouterOS 7.14.3
- # software id = Y09A-7J23
- #
- # model = RB3011UiAS
- # serial number = ##############
- /disk
- add parent=usb1 partition-number=1 partition-offset=512 partition-size=\
- "30 765 219 328" type=partition
- /interface bridge
- add admin-mac=B8:69:F4:98:60:FB auto-mac=no name=bridge-LAN port-cost-mode=\
- short
- /interface ethernet
- set [ find default-name=ether1 ] name=ether1-PF_AIR
- set [ find default-name=ether2 ] name=ether2-TIM
- set [ find default-name=ether5 ] name=ether5-LAN2
- /interface wireguard
- add comment=back-to-home-vpn listen-port=10434 mtu=1420 name=back-to-home-vpn
- /interface vlan
- add interface=bridge-LAN name=vlan10-Ospiti vlan-id=10
- add interface=bridge-LAN name=vlan11-IoT vlan-id=11
- add interface=bridge-LAN name=vlan13-Inaffidabile vlan-id=13
- /interface pppoe-client
- add add-default-route=yes interface=ether1-PF_AIR name=PF-AIR user=\
- air218@pianetafibra.it
- add add-default-route=yes disabled=no interface=sfp1 name=PF-FTTC \
- use-peer-dns=yes user=fttc4250
- /interface list
- add comment=defconf name=WAN
- add comment=defconf name=LAN
- /interface lte apn
- set [ find default=yes ] ip-type=ipv4 use-network-apn=no
- /ip dhcp-server option
- add code=160 name=160_Polycom value=\
- "' http://172.16.20.215/provisioning/m1c2up6299fyn4'"
- /ip pool
- add name=dhcp ranges=172.16.30.2-172.16.30.254
- add name=vpn ranges=192.168.89.2-192.168.89.255
- add name=dhcp_pool2 ranges=192.168.12.2-192.168.12.254
- add name=dhcp_pool3 ranges=192.168.10.2-192.168.10.254
- add name=dhcp_pool4 ranges=192.168.11.2-192.168.11.254
- add name=dhcp_pool5 ranges=192.168.13.2-192.168.13.254
- /ip dhcp-server
- add address-pool=dhcp interface=bridge-LAN lease-time=23h59m59s name=LAN_DHCP
- add address-pool=dhcp_pool2 interface=ether5-LAN2 name=LAN2_DHCP
- add address-pool=dhcp_pool3 interface=vlan10-Ospiti name=Ospiti_DHCP
- add address-pool=dhcp_pool4 interface=vlan11-IoT name=IoT_DHCP
- add address-pool=dhcp_pool5 interface=vlan13-Inaffidabile name=\
- Inaffidabile_DHCP
- /ip smb users
- add name=admin
- /port
- set 0 name=serial0
- /ppp profile
- set *FFFFFFFE local-address=192.168.89.1 remote-address=vpn
- /queue simple
- add comment="Limite Ospiti" max-limit=1M/7M name=Ospiti target=\
- 192.168.10.0/24
- add comment="Limite AptDis" max-limit=1M/10M name=AptDis target=\
- 192.16.12.0/24
- add comment="Limite Inaffidabile" max-limit=500k/5M name=Inaffidabile target=\
- 192.168.13.0/24
- /routing table
- add disabled=no fib name=to_FTTC
- add disabled=no fib name=to_AIR
- /ip smb
- set comment=MIKROTIK domain=WORKGROUP interfaces=bridge-LAN
- /interface bridge port
- add bridge=bridge-LAN comment=defconf ingress-filtering=no interface=ether6 \
- internal-path-cost=10 path-cost=10
- add bridge=bridge-LAN comment=defconf ingress-filtering=no interface=ether7 \
- internal-path-cost=10 path-cost=10
- add bridge=bridge-LAN comment=defconf ingress-filtering=no interface=ether8 \
- internal-path-cost=10 path-cost=10
- add bridge=bridge-LAN comment=defconf ingress-filtering=no interface=ether9 \
- internal-path-cost=10 path-cost=10
- add bridge=bridge-LAN comment=defconf ingress-filtering=no interface=ether10 \
- internal-path-cost=10 path-cost=10
- add bridge=bridge-LAN comment=defconf disabled=yes ingress-filtering=no \
- interface=sfp1 internal-path-cost=10 path-cost=10
- /ip firewall connection tracking
- set udp-timeout=10s
- /ip neighbor discovery-settings
- set discover-interface-list=LAN
- /ip settings
- set max-neighbor-entries=8192
- /ipv6 settings
- set disable-ipv6=yes max-neighbor-entries=8192
- /interface bridge vlan
- add bridge=bridge-LAN tagged=vlan10-Ospiti,vlan11-IoT,vlan13-Inaffidabile \
- vlan-ids=10,11,13
- /interface l2tp-server server
- set enabled=yes use-ipsec=yes
- /interface list member
- add comment=defconf interface=bridge-LAN list=LAN
- add interface=PF-FTTC list=WAN
- add interface=PF-AIR list=WAN
- /interface ovpn-server server
- set auth=sha256,sha512 certificate=a-centauri cipher=\
- blowfish128,aes256-cbc,aes256-gcm enabled=yes protocol=udp \
- redirect-gateway=def1
- /interface pptp-server server
- # PPTP connections are considered unsafe, it is suggested to use a more modern V N protocol instead
- set authentication=pap,chap,mschap1,mschap2 enabled=yes
- /interface sstp-server server
- set default-profile=default-encryption
- /ip address
- add address=172.16.20.1/16 comment=LAN interface=bridge-LAN network=\
- 172.16.0.0
- add address=192.168.12.1/24 comment=LAN2 interface=ether5-LAN2 network=\
- 192.168.12.0
- add address=192.168.10.1/24 comment=Ospiti interface=vlan10-Ospiti network=\
- 192.168.10.0
- add address=192.168.11.1/24 comment=IoT interface=vlan11-IoT network=\
- 192.168.11.0
- add address=192.168.13.1/24 comment=Inaffidabile interface=\
- vlan13-Inaffidabile network=192.168.13.0
- add address=192.168.2.1/24 comment=TIM interface=ether2-TIM network=\
- 192.168.2.0
- /ip cloud
- set back-to-home-vpn=enabled ddns-enabled=yes
- /ip dhcp-server lease
- add address=172.16.20.161 mac-address=BC:DD:C2:44:1E:DA server=LAN_DHCP
- add address=172.16.20.233 client-id=1:b8:27:eb:f7:41:9f comment=Marconi \
- mac-address=B8:27:EB:F7:41:9F server=LAN_DHCP
- add address=172.16.30.244 dhcp-option=160_Polycom mac-address=\
- 64:16:7F:0B:F6:FA server=LAN_DHCP
- add address=172.16.20.235 client-id=1:b8:27:eb:be:70:8f mac-address=\
- B8:27:EB:BE:70:8F server=LAN_DHCP
- add address=172.16.20.212 client-id=1:b8:27:eb:cf:86:71 mac-address=\
- B8:27:EB:CF:86:71 server=LAN_DHCP
- add address=172.16.25.42 client-id=1:0:60:35:6:f0:16 mac-address=\
- 00:60:35:06:F0:16 server=LAN_DHCP
- add address=172.16.22.100 client-id=\
- ff:11:e4:49:24:0:1:0:1:2d:a7:ed:cd:bc:24:11:e4:49:24 mac-address=\
- BC:24:11:E4:49:24 server=LAN_DHCP
- add address=172.16.20.215 client-id=1:bc:24:11:9e:f2:3 mac-address=\
- BC:24:11:9E:F2:03 server=LAN_DHCP
- add address=172.16.20.211 client-id=\
- ff:11:6e:18:77:0:1:0:1:2d:a5:b3:f5:bc:24:11:6e:18:77 mac-address=\
- BC:24:11:6E:18:77 server=LAN_DHCP
- add address=172.16.20.160 client-id=1:d8:3a:dd:a7:d6:5e comment=Helios \
- mac-address=D8:3A:DD:A7:D6:5E server=LAN_DHCP
- add address=172.16.20.230 comment=SunFire mac-address=00:03:BA:16:77:13 \
- server=LAN_DHCP
- add address=172.16.23.1 client-id=1:0:a0:c5:b9:35:b1 mac-address=\
- 00:A0:C5:B9:35:B1 server=LAN_DHCP
- /ip dhcp-server network
- add address=172.16.0.0/16 comment=LAN dns-server=172.16.20.211,172.16.20.210 \
- gateway=172.16.20.1 netmask=16
- add address=192.168.10.0/24 dns-server=172.16.20.211,172.16.20.210 gateway=\
- 192.168.10.1
- add address=192.168.11.0/24 dns-server=172.16.20.211,172.16.20.210 gateway=\
- 192.168.11.1
- add address=192.168.12.0/24 dns-server=172.16.20.211,172.16.20.210 gateway=\
- 192.168.12.1
- add address=192.168.13.0/24 dns-server=172.16.20.211,172.16.20.210 gateway=\
- 192.168.13.1
- /ip dns static
- add address=172.16.20.1 comment=defconf name=router.lan
- /ip firewall filter
- add action=accept chain=input comment=\
- "defconf: accept established,related,untracked" connection-state=\
- established,related,untracked
- add action=accept chain=input comment="allow IPsec NAT" dst-port=4500 \
- protocol=udp
- add action=accept chain=input comment="allow IKE" dst-port=500 protocol=udp
- add action=accept chain=input comment="allow l2tp" dst-port=1701 protocol=udp
- add action=accept chain=input comment="allow pptp" dst-port=1723 protocol=tcp
- add action=accept chain=input comment="allow sstp" dst-port=443 protocol=tcp
- add action=drop chain=input comment="defconf: drop invalid" connection-state=\
- invalid
- add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
- add action=accept chain=input comment=\
- "defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
- add action=accept chain=forward comment="defconf: accept in ipsec policy" \
- ipsec-policy=in,ipsec
- add action=accept chain=forward comment="defconf: accept out ipsec policy" \
- ipsec-policy=out,ipsec
- add action=accept chain=forward comment=\
- "defconf: accept established,related, untracked" connection-state=\
- established,related,untracked
- add action=drop chain=forward comment="defconf: drop invalid" \
- connection-state=invalid
- add action=drop chain=forward comment=\
- "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
- connection-state=new in-interface-list=WAN
- add action=drop chain=input comment="Deny SSH from WAN" dst-port=22 \
- in-interface-list=WAN protocol=tcp
- add action=drop chain=input comment="Deny telnet from WAN" dst-port=23 \
- in-interface-list=WAN protocol=tcp
- /ip firewall mangle
- add action=mark-connection chain=forward comment="PF-AIR Forward" disabled=\
- yes in-interface=PF-AIR new-connection-mark=AIR_conn passthrough=yes
- add action=mark-connection chain=forward comment="PF-FTTC forward" disabled=\
- yes in-interface=PF-FTTC new-connection-mark=FTTC_conn passthrough=yes
- add action=mark-connection chain=prerouting comment="PF-AIR PortForward" \
- disabled=yes dst-address-type=!local in-interface=PF-AIR \
- new-connection-mark=AIR_conn passthrough=yes
- add action=mark-connection chain=prerouting comment="PF-FTTC PortForward" \
- disabled=yes dst-address-type=!local in-interface=PF-FTTC \
- new-connection-mark=FTTC_conn passthrough=yes
- add action=mark-connection chain=input in-interface=PF-FTTC \
- new-connection-mark=FTTC_conn
- # PF-AIR not ready
- add action=mark-connection chain=input in-interface=PF-AIR \
- new-connection-mark=AIR_conn
- add action=mark-routing chain=output connection-mark=FTTC_conn \
- new-routing-mark=to_FTTC
- add action=mark-routing chain=output connection-mark=AIR_conn \
- new-routing-mark=to_AIR
- add action=mark-connection chain=prerouting dst-address-type=!local \
- in-interface=bridge-LAN new-connection-mark=FTTC_conn passthrough=yes \
- per-connection-classifier=both-addresses-and-ports:2/0
- add action=mark-connection chain=prerouting dst-address-type=!local \
- in-interface=bridge-LAN new-connection-mark=AIR_conn passthrough=yes \
- per-connection-classifier=both-addresses-and-ports:2/1
- add action=mark-routing chain=prerouting connection-mark=FTTC_conn \
- in-interface=bridge-LAN new-routing-mark=to_FTTC
- add action=mark-routing chain=prerouting connection-mark=AIR_conn \
- in-interface=bridge-LAN new-routing-mark=to_AIR
- /ip firewall nat
- add action=masquerade chain=srcnat comment="masq. vpn traffic" src-address=\
- 192.168.89.0/24
- add action=dst-nat chain=dstnat comment="SunFire HTTPS" dst-port=443 \
- in-interface-list=WAN protocol=tcp to-addresses=172.16.20.230 to-ports=\
- 443
- add action=dst-nat chain=dstnat comment="SunFire FTP" dst-port=21 \
- in-interface-list=WAN protocol=tcp to-addresses=172.16.20.230 to-ports=21
- add action=dst-nat chain=dstnat comment="SunFire HTTP" dst-port=80 \
- in-interface-list=WAN protocol=tcp to-addresses=172.16.20.230 to-ports=80
- add action=dst-nat chain=dstnat comment="SunFire SSH" dst-port=2222 \
- in-interface-list=WAN protocol=tcp to-addresses=172.16.20.230 to-ports=22
- add action=dst-nat chain=dstnat comment="Webmin sunfire" dst-port=10000 \
- in-interface-list=WAN protocol=tcp to-addresses=172.16.20.230 to-ports=\
- 10000
- add action=dst-nat chain=dstnat comment=Minecraft dst-port=25565 \
- in-interface-list=WAN protocol=tcp to-addresses=172.16.20.220 to-ports=\
- 25565
- add action=dst-nat chain=dstnat comment="Minecraft Dynmap" dst-port=8123 \
- in-interface-list=WAN protocol=tcp to-addresses=172.16.20.220 to-ports=\
- 8123
- add action=dst-nat chain=dstnat comment="SSH Pi5 JVital" dst-port=52233 \
- in-interface-list=WAN protocol=tcp to-addresses=172.16.20.160 to-ports=22
- add action=masquerade chain=srcnat out-interface=PF-FTTC
- # PF-AIR not ready
- add action=masquerade chain=srcnat out-interface=PF-AIR
- add action=masquerade chain=srcnat comment="defconf: masquerade" \
- ipsec-policy=out,none out-interface-list=WAN
- /ip route
- add check-gateway=ping dst-address=0.0.0.0/0 gateway=PF-FTTC routing-table=\
- to_FTTC
- add check-gateway=ping dst-address=0.0.0.0/0 gateway=PF-AIR routing-table=\
- to_AIR
- /ip service
- set www-ssl address=0.0.0.0/0 certificate=a-centauri disabled=no tls-version=\
- only-1.2
- /ip smb shares
- add directory=usb1-part1 name=USB1 valid-users=guest
- /ip upnp
- set enabled=yes
- /ip upnp interfaces
- add interface=PF-AIR type=external
- /ppp aaa
- set use-radius=yes
- /ppp secret
- add name=vpn
- add name=J2 profile=default-encryption
- /radius
- add accounting-backup=yes address=172.16.20.216 comment=RADIUS service=\
- ppp,login,hotspot,ipsec,dot1x
- /routing bfd configuration
- add disabled=no interfaces=all min-rx=200ms min-tx=200ms multiplier=5
- /system clock
- set time-zone-name=Europe/Rome
- /system identity
- set name=MikroTik-VR
- /system note
- set show-at-login=no
- /system ntp client
- set enabled=yes
- /system ntp server
- set enabled=yes use-local-clock=yes
- /system ntp client servers
- add address=time.inrim.it
- add address=ntp1.inrim.it
- /tool graphing interface
- add allow-address=172.16.0.0/16
- /tool mac-server
- set allowed-interface-list=LAN
- /tool mac-server mac-winbox
- set allowed-interface-list=LAN
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement