23:53:44:181 : Serial Port COM6 is successfully opened.
  23:53:44:181 : Port configuration: parity = odd, baudrate = 115200, data-bit = 8,                     stop-bit = 1.0, flow-control = off
  23:53:44:181 : No Init bits value is : 0
  23:53:44:182 : Sending init command:
  23:53:44:184 : byte 0x7F sent successfully to target
  23:53:46:185 : Wait ends after 1 loop, dataready = 0, delay = 2000
  23:53:46:185 : Timeout error occured while waiting for acknowledgement.
  23:53:46:185 : No response from target received
  23:53:46:185 : byte 0x7F sent successfully to target
  23:53:46:284 : Wait ends after 1 loop, dataready = 0, delay = 100
  23:53:46:284 : Timeout error occured while waiting for acknowledgement.
  23:53:46:284 : No response from target received
  23:53:46:284 : Error: Activating device: KO. Please, verify the boot mode configuration and check the serial port configuration. Reset your device then try again...
  23:53:46:327 :  UART PORT CLOSE