API tools faq
paste
Guest User

meson-g12b-gtking.dtb

a guest
May 8th, 2020
165
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.16 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.05.08 12:18:24 =~=~=~=~=~=~=~=~=~=~=~=
  2. G12B:BL:6e7c85:7898ac;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;0.
  3. bl2_stage_init 0x01
  4. bl2_stage_init 0x81
  5. hw id: 0x0001 - pwm id 0x00
  6. bl2_stage_init 0xc0
  7. bl2_stage_init 0x02
  8.  
  9. L0:00000000
  10. L1:00000703
  11. L2:0000c067
  12. L3:14000020
  13. B2:00402000
  14. B1:e0f83180
  15.  
  16. TE: 131182
  17.  
  18. BL2 Built : 15:42:20, Aug 2 2019. g12b gfa34f81 - luan.yuan@droid15-sz
  19.  
  20. Board ID = 11
  21. Set A53 clk to 24M
  22. Set A73 clk to 24M
  23. Set clk81 to 24M
  24. A53 clk: 1200 MHz
  25. A73 clk: 1200 MHz
  26. CLK81: 166.6M
  27. smccc: 000248a4
  28. eMMC boot @ 0
  29. sw8 s
  30. DDR driver_vesion: LPDDR4_PHY_V_0_1_15 build time: Aug 2 2019 15:42:16
  31. board id: 11
  32. Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  33. fw parse done
  34. Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
  35. Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
  36. PIEI prepare done
  37. fastboot data load
  38. 00000000
  39. emmc switch 1 ok
  40. ddr saved addr:00016000
  41. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  42. 00000000
  43. emmc switch 0 ok
  44. fastboot data verify
  45. verify result: 0
  46. enable_fast_boot
  47. dmc_margin_rx==11 dmc_margin_tx==12 steps
  48. DDR4 probe
  49. ddr clk to 1152MHz
  50.  
  51. dmc_version 0000
  52. Load ddrfw from eMMC, src: 0x00020200, des: 0xfffd0000, size: 0x0000c000, part: 0
  53. Check phy result
  54. INFO : End of initialization
  55. INFO : Training has run successfully!
  56.  
  57. R0_RxClkDly_Margin==0 ps 0
  58. R0_TxDqDly_Margi==0 ps 0
  59.  
  60.  
  61. R1_RxClkDly_Margin==0 ps 0
  62. R1_TxDqDly_Margi==0 ps 0
  63.  
  64. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0001
  65.  
  66. soc_vref_reg_value 0x 00000039 0000003a 00000039 0000003a 00000039 00000037 0000003a 00000038 00000038 0000003a 00000038 00000039 0000003b 00000039 00000039 0000003b 00000037 0000003a 00000037 00000039 0000003a 00000034 00000037 0000003a 0000003c 0000003d 0000003a 0000003b 0000003b 0000003b 0000003e 0000003a dram_vref_reg_value 0x 0000000e
  67. aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:30:33
  68. DDR cs0 size: 3928MB
  69. DDR cs1 size: 0MB
  70. DMC_DDR_CTRL: 0050002dDDR size: 3928MB
  71. cs0 DataBus test pass
  72. cs0 AddrBus test pass
  73.  
  74. non-sec scramble use zero key
  75. ddr scramble enabled
  76.  
  77. 100bdlr_step_size ps== 425
  78. result report
  79. boot times 0Enable ddr reg access
  80. 00000000
  81. emmc switch 3 ok
  82. BL2: rpmb counter: 0x0000001c
  83. 00000000
  84. emmc switch 0 ok
  85. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  86. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x00120000, part: 0
  87. 0.0;M3 CHK:0;cm4_sp_mode 0
  88.  
  89. MVN_1=0x00000000
  90.  
  91. MVN_2=0x00000000
  92.  
  93. [Image: g12b_v1.1.3389-92241b5 2019-07-02 17:23:01 luan.yuan@droid15-sz]
  94.  
  95. OPS=0x40
  96.  
  97. ring efuse init
  98.  
  99. chipver efuse init
  100.  
  101. 29 0a 40 00 01 21 15 00 00 17 33 30 53 30 4e 50
  102.  
  103. [0.018960 Inits done]
  104.  
  105. secure task start!
  106. high task start!
  107. low task start!
  108. run into bl31
  109. NOTICE: BL31: v1.3(release):4fc40b1
  110. NOTICE: BL31: Built : 15:58:17, May 22 2019
  111. NOTICE: BL31: G12A normal boot!
  112. NOTICE: BL31: BL33 decompress pass
  113. INFO: BL3-2: ATOS-V2.4.2-13-gc341bc0 #1 Thu Jun 27 19:33:34 2019 +0800 arm
  114. INFO: BL3-2: Chip: G12B Rev: A (29:A - 40:2)
  115. INFO: BL3-2: crypto engine DMA
  116. INFO: BL3-2: secure time TEE
  117. INFO: BL3-2: CONFIG_DEVICE_SECURE 0xb200000e
  118.  
  119.  
  120. U-Boot 2015.01-gd7b4440 (Nov 26 2019 - 09:57:17)
  121.  
  122. DRAM: 3.8 GiB
  123. Relocation Offset is: d6e25000
  124. spi_post_bind(spicc): req_seq = 0
  125. spi_post_bind(spifc): req_seq = 1
  126. register usb cfg[0][1] = 00000000d7f31c68
  127. NAND: get_sys_clk_rate_mtd() 290, clock setting 200!
  128. NAND device id: 0 ff ff ff ff ff
  129. No NAND device found!!!
  130. nand init failed: -6
  131. get_sys_clk_rate_mtd() 290, clock setting 200!
  132. NAND device id: 0 ff ff ff ff ff
  133. No NAND device found!!!
  134. nand init failed: -6
  135. MMC: aml_priv->desc_buf = 0x00000000d3e15b10
  136. aml_priv->desc_buf = 0x00000000d3e17e50
  137. SDIO Port B: 0, SDIO Port C: 1
  138. co-phase 0x3, tx-dly 0, clock 400000
  139. co-phase 0x3, tx-dly 0, clock 400000
  140. co-phase 0x3, tx-dly 0, clock 400000
  141. emmc/sd response timeout, cmd8, status=0x1ff2800
  142. emmc/sd response timeout, cmd55, status=0x1ff2800
  143. co-phase 0x3, tx-dly 0, clock 400000
  144. co-phase 0x1, tx-dly 0, clock 40000000
  145. aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x182000
  146. [mmc_startup] mmc refix success
  147. init_part() 297: PART_TYPE_AML
  148. [mmc_init] mmc init success
  149. Amlogic multi-dtb tool
  150. Multi dtb detected
  151. cpu_id.chip_rev: a
  152. Multi dtb tool version: v2 .
  153. Support 2 dtbs.
  154. aml_dt soc: g12b platform: w400 variant: a
  155. dtb 0 soc: g12b plat: w400 vari: a
  156. dtb 1 soc: g12b plat: w400 vari: b
  157. Find match dtb: 0
  158. start dts,buffer=00000000d3e1a6c0,dt_addr=00000000d3e1aec0
  159. get_partition_from_dts() 91: ret 0
  160. Amlogic multi-dtb tool
  161. Multi dtb detected
  162. cpu_id.chip_rev: a
  163. Multi dtb tool version: v2 .
  164. Support 2 dtbs.
  165. aml_dt soc: g12b platform: w400 variant: a
  166. dtb 0 soc: g12b plat: w400 vari: a
  167. dtb 1 soc: g12b plat: w400 vari: b
  168. Find match dtb: 0
  169. parts: 17
  170. 00: logo 0000000000800000 1
  171. 01: recovery 0000000001800000 1
  172. 02: misc 0000000000800000 1
  173. 03: dtbo 0000000000800000 1
  174. 04: cri_data 0000000000800000 2
  175. 05: param 0000000001000000 2
  176. 06: boot 0000000001000000 1
  177. set has_boot_slot = 0
  178. 07: rsv 0000000001000000 1
  179. 08: metadata 0000000001000000 1
  180. 09: vbmeta 0000000000200000 1
  181. 10: tee 0000000002000000 1
  182. 11: vendor 0000000030000000 1
  183. 12: odm 0000000008000000 1
  184. 13: system 0000000080000000 1
  185. 14: product 0000000008000000 1
  186. 15: cache 0000000046000000 2
  187. 16: data ffffffffffffffff 4
  188. init_part() 297: PART_TYPE_AML
  189. eMMC/TSD partition table have been checked OK!
  190. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  191. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  192. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  193. mmc env offset: 0x4d400000
  194. In: serial
  195. Out: serial
  196. Err: serial
  197. reboot_mode=cold_boot
  198. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  199. _verify_dtb_checksum()-3406: calc e8d87785, store e8d87785
  200. _verify_dtb_checksum()-3406: calc e8d87785, store e8d87785
  201. dtb_read()-3623: total valid 2
  202. update_old_dtb()-3604: do nothing
  203. Amlogic multi-dtb tool
  204. Multi dtb detected
  205. cpu_id.chip_rev: a
  206. Multi dtb tool version: v2 .
  207. Support 2 dtbs.
  208. aml_dt soc: g12b platform: w400 variant: a
  209. dtb 0 soc: g12b plat: w400 vari: a
  210. dtb 1 soc: g12b plat: w400 vari: b
  211. Find match dtb: 0
  212. amlkey_init() enter!
  213. [EFUSE_MSG]keynum is 4
  214. vpu: clk_level in dts: 7
  215. vpu: vpu_power_on
  216. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  217. vpu: vpu_module_init_config
  218. vpp: vpp_init
  219. vpp: vpp osd2 matrix rgb2yuv..............
  220. cvbs: cpuid:0x29
  221. lcd: detect mode: tablet, key_valid: 0
  222. lcd: load config from dts
  223. lcd: pinctrl_version: 2
  224. lcd: use panel_type=lcd_1
  225. lcd: bl: pinctrl_version: 2
  226. lcd: bl: name: backlight_pwm, method: 1
  227. lcd: bl: aml_bl_power_ctrl: 0
  228. SARADC closed.
  229. Net: dwmac.ff3f0000amlkey_init() enter!
  230. amlkey_init() 71: already init!
  231. [EFUSE_MSG]keynum is 4
  232. MACADDR:02:00:00:15:21:01(from chipid)
  233.  
  234. CONFIG_AVB2: null
  235. Start read misc partition datas!
  236. info->magic =
  237. info->version_major = 1
  238. info->version_minor = 0
  239. info->slots[0].priority = 15
  240. info->slots[0].tries_remaining = 7
  241. info->slots[0].successful_boot = 0
  242. info->slots[1].priority = 14
  243. info->slots[1].tries_remaining = 7
  244. info->slots[1].successful_boot = 0
  245. info->crc32 = -1075449479
  246. active slot = 0
  247. wipe_data=successful
  248. wipe_cache=successful
  249. upgrade_step=2
  250. reboot_mode:::: cold_boot
  251. amlkey_init() enter!
  252. amlkey_init() 71: already init!
  253. [EFUSE_MSG]keynum is 4
  254. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  255. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  256. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  257. lcd: error: outputmode[1080p60hz] is not support
  258. hpd_state=1
  259. edid preferred_mode is 1080p60hz[16]
  260. hdr mode is 0
  261. dv mode is ver:0 len: 0
  262. hdr10+ mode is 0
  263. [OSD]load fb addr from dts:/meson-fb
  264. [OSD]set initrd_high: 0x7f800000
  265. [OSD]fb_addr for logo: 0x7f800000
  266. [OSD]load fb addr from dts:/meson-fb
  267. [OSD]fb_addr for logo: 0x7f800000
  268. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  269. [CANVAS]canvas init
  270. [CANVAS]addr=0x7f800000 width=5760, height=2160
  271. [OSD]osd_hw.free_dst_data: 0,1919,0,1079
  272. [OSD]osd1_update_disp_freescale_enable
  273. cvbs: outputmode[1080p60hz] is invalid
  274. vpp: vpp_matrix_update: 2
  275. set hdmitx VIC = 16
  276. config HPLL = 5940000 frac_rate = 1
  277. HPLL: 0x3b3a04f7
  278. HPLL: 0x1b3a04f7
  279. HPLLv1: 0xdb3a04f7
  280. config HPLL done
  281. j = 6 vid_clk_div = 1
  282. hdmitx: set enc for VIC: 16
  283. hdmitx phy setting done
  284. enc_vpu_bridge_reset[1249]
  285. rx version is 1.4 or below div=10
  286. vpp: sdr_mode = 2
  287. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  288. amlkey_init() enter!
  289. amlkey_init() 71: already init!
  290. [EFUSE_MSG]keynum is 4
  291. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  292. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  293. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  294. Command: bcb uboot-command
  295. Start read misc partition datas!
  296. BCB hasn't any datas,exit!
  297. InUsbBurn
  298. noSof
  299. sof timeout, reset usb phy tuning
  300. amlkey_init() enter!
  301. amlkey_init() 71: already init!
  302. [EFUSE_MSG]keynum is 4
  303. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  304. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  305. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  306. Hit Enter or space or Ctrl+C key to stop autoboot -- : 1  0
  307. card out
  308. (Re)start USB...
  309. USB0: USB3.0 XHCI init start
  310. Register 3000140 NbrPorts 2
  311. Starting the controller
  312. USB XHCI 1.10
  313. scanning bus 0 for devices... 3 USB Device(s) found
  314. scanning usb for storage devices... init_part() 282: PART_TYPE_DOS
  315. 1 Storage Device(s) found
  316. reading s905_autoscript
  317. 1654 bytes read in 23 ms (69.3 KiB/s)
  318. ## Executing script at 01020000
  319. start amlogic old u-boot
  320. ## Error: "bootfromsd" not defined
  321. card out
  322. ** Bad device mmc 0 **
  323. reading boot_android
  324. ** Unable to read file boot_android **
  325. card out
  326. ** Bad device mmc 0 **
  327. reading u-boot.ext
  328. ** Unable to read file u-boot.ext **
  329. card out
  330. ** Bad device mmc 0 **
  331. start test usb
  332. reading uEnv.txt
  333. 350 bytes read in 17 ms (19.5 KiB/s)
  334. ## Error: "mac" not defined
  335. ## Error: "eth_mac" not defined
  336. reading /zImage
  337. 29272576 bytes read in 873 ms (32 MiB/s)
  338. reading /uInitrd
  339. 11214358 bytes read in 349 ms (30.6 MiB/s)
  340. reading /dtb/amlogic/meson-g12b-gtking.dtb
  341. 50214 bytes read in 40 ms (1.2 MiB/s)
  342. ## Error: "aadmac" not defined
  343. libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
  344. [rsvmem] fdt get prop fail.
  345. ## Loading init Ramdisk from Legacy Image at 13000000 ...
  346. Image Name: uInitrd
  347. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  348. Data Size: 11214294 Bytes = 10.7 MiB
  349. Load Address: 00000000
  350. Entry Point: 00000000
  351. Verifying Checksum ... OK
  352. Start read misc partition datas!
  353. info->magic =
  354. info->version_major = 1
  355. info->version_minor = 0
  356. info->slots[0].priority = 15
  357. info->slots[0].tries_remaining = 7
  358. info->slots[0].successful_boot = 0
  359. info->slots[1].priority = 14
  360. info->slots[1].tries_remaining = 7
  361. info->slots[1].successful_boot = 0
  362. info->crc32 = -1075449479
  363. active slot = 0
  364. active_slot is normal
  365. load dtb from 0x1000000 ......
  366. Amlogic multi-dtb tool
  367. Single dtb detected
  368. ## Flattened Device Tree blob at 01000000
  369. Booting using the fdt blob at 0x1000000
  370. find 1 dtbos
  371. No androidboot.dtbo_idx configured
  372. And no dtbos will be applied
  373. libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
  374. [rsvmem] fdt get prop fail.
  375. Loading Ramdisk to 7ed4e000, end 7f7ffdd6 ... OK
  376. Loading Device Tree to 000000001fff0000, end 000000001ffff5db ... OK
  377.  
  378. Starting kernel ...
  379.  
  380. uboot time: 9520123 us
  381. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  382. [ 0.000000] Linux version 5.7.0-rc2-arm-64 (root@vbox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)), GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #20.05.3 SMP PREEMPT Sat Apr 25 13:17:40 MSK 2020
  383. [ 0.000000] Machine model: Beelink GT-King
  384. [ 0.000000] efi: UEFI not found.
  385. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a8000000, size 768 MiB
  386. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  387. [ 0.000000] psci: probing for conduit method from DT.
  388. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  389. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  390. [ 0.000000] psci: Trusted OS migration not required
  391. [ 0.000000] psci: SMC Calling Convention v1.1
  392. [ 0.000000] percpu: Embedded 22 pages/cpu s51160 r8192 d30760 u90112
  393. [ 0.000000] Detected VIPT I-cache on CPU0
  394. [ 0.000000] CPU features: detected: ARM erratum 845719
  395. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 870144
  396. [ 0.000000] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0
  397. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  398. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  399. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  400. [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
  401. [ 0.000000] Memory: 2563516K/3535872K available (16124K kernel code, 1514K rwdata, 6980K rodata, 3904K init, 944K bss, 185924K reserved, 786432K cma-reserved)
  402. [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x84/0x158 with crng_init=0
  403. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  404. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  405. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  406. [ 0.000000] Tasks RCU enabled.
  407. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  408. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  409. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  410. [ 0.000000] GIC: Using split EOI/Deactivate mode
  411. [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  412. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  413. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  414. [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  415. [ 0.000212] Console: colour dummy device 80x25
  416. [ 0.000557] printk: console [tty0] enabled
  417. [ 0.000601] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  418. [ 0.000623] pid_max: default: 32768 minimum: 301
  419. [ 0.000769] LSM: Security Framework initializing
  420. [ 0.000829] SELinux: Initializing.
  421. [ 0.000962] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  422. [ 0.000993] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  423. [ 0.002754] rcu: Hierarchical SRCU implementation.
  424. [ 0.005888] EFI services will not be available.
  425. [ 0.006289] smp: Bringing up secondary CPUs ...
  426. [ 0.006960] Detected VIPT I-cache on CPU1
  427. [ 0.007010] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  428. [ 0.008173] CPU features: detected: ARM erratum 858921
  429. [ 0.008182] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  430. [ 0.008190] Detected VIPT I-cache on CPU2
  431. [ 0.008213] arch_timer: Enabling local workaround for ARM erratum 858921
  432. [ 0.008227] arch_timer: CPU2: Trapping CNTVCT access
  433. [ 0.008234] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
  434. [ 0.008874] Detected VIPT I-cache on CPU3
  435. [ 0.008890] arch_timer: Enabling local workaround for ARM erratum 858921
  436. [ 0.008896] arch_timer: CPU3: Trapping CNTVCT access
  437. [ 0.008901] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
  438. [ 0.009485] Detected VIPT I-cache on CPU4
  439. [ 0.009501] arch_timer: Enabling local workaround for ARM erratum 858921
  440. [ 0.009507] arch_timer: CPU4: Trapping CNTVCT access
  441. [ 0.009512] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
  442. [ 0.010105] Detected VIPT I-cache on CPU5
  443. [ 0.010120] arch_timer: Enabling local workaround for ARM erratum 858921
  444. [ 0.010126] arch_timer: CPU5: Trapping CNTVCT access
  445. [ 0.010131] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
  446. [ 0.010199] smp: Brought up 1 node, 6 CPUs
  447. [ 0.010379] SMP: Total of 6 processors activated.
  448. [ 0.010393] CPU features: detected: 32-bit EL0 Support
  449. [ 0.010406] CPU features: detected: CRC32 instructions
  450. [ 0.023946] CPU: All CPU(s) started at EL2
  451. [ 0.024007] alternatives: patching kernel code
  452. [ 0.025544] devtmpfs: initialized
  453. [ 0.031534] Registered cp15_barrier emulation handler
  454. [ 0.031558] Registered setend emulation handler
  455. [ 0.031570] KASLR disabled due to lack of seed
  456. [ 0.031851] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  457. [ 0.031873] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  458. [ 0.043211] xor: measuring software checksum speed
  459. [ 0.079972] 8regs : 3320.000 MB/sec
  460. [ 0.120010] 32regs : 3851.000 MB/sec
  461. [ 0.160049] arm64_neon: 3588.000 MB/sec
  462. [ 0.160057] xor: using function: 32regs (3851.000 MB/sec)
  463. [ 0.160098] pinctrl core: initialized pinctrl subsystem
  464. [ 0.160676] thermal_sys: Registered thermal governor 'step_wise'
  465. [ 0.160959] DMI not present or invalid.
  466. [ 0.161301] NET: Registered protocol family 16
  467. [ 0.162452] DMA: preallocated 256 KiB pool for atomic allocations
  468. [ 0.162473] audit: initializing netlink subsys (disabled)
  469. [ 0.162622] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1
  470. [ 0.163605] cpuidle: using governor ladder
  471. [ 0.163632] cpuidle: using governor menu
  472. [ 0.163855] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  473. [ 0.163954] ASID allocator initialised with 65536 entries
  474. [ 0.164716] Serial: AMBA PL011 UART driver
  475. [ 0.176882] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  476. [ 0.176902] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  477. [ 0.176912] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  478. [ 0.176922] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  479. [ 0.180263] cryptd: max_cpu_qlen set to 1000
  480. [ 0.252186] raid6: neonx8 gen() 2808 MB/s
  481. [ 0.320248] raid6: neonx8 xor() 2042 MB/s
  482. [ 0.388347] raid6: neonx4 gen() 3003 MB/s
  483. [ 0.456393] raid6: neonx4 xor() 2398 MB/s
  484. [ 0.524461] raid6: neonx2 gen() 2583 MB/s
  485. [ 0.592527] raid6: neonx2 xor() 2186 MB/s
  486. [ 0.660596] raid6: neonx1 gen() 2083 MB/s
  487. [ 0.728663] raid6: neonx1 xor() 1727 MB/s
  488. [ 0.796741] raid6: int64x8 gen() 1380 MB/s
  489. [ 0.864812] raid6: int64x8 xor() 734 MB/s
  490. [ 0.932869] raid6: int64x4 gen() 1463 MB/s
  491. [ 1.000942] raid6: int64x4 xor() 733 MB/s
  492. [ 1.069008] raid6: int64x2 gen() 1359 MB/s
  493. [ 1.137071] raid6: int64x2 xor() 619 MB/s
  494. [ 1.205145] raid6: int64x1 gen() 1125 MB/s
  495. [ 1.273205] raid6: int64x1 xor() 461 MB/s
  496. [ 1.273213] raid6: using algorithm neonx4 gen() 3003 MB/s
  497. [ 1.273221] raid6: .... xor() 2398 MB/s, rmw enabled
  498. [ 1.273229] raid6: using neon recovery algorithm
  499. [ 1.273558] ACPI: Interpreter disabled.
  500. [ 1.274537] VDDAO_3V3: supplied by 12V
  501. [ 1.274778] iommu: Default domain type: Translated
  502. [ 1.274956] vgaarb: loaded
  503. [ 1.275318] SCSI subsystem initialized
  504. [ 1.275561] usbcore: registered new interface driver usbfs
  505. [ 1.275594] usbcore: registered new interface driver hub
  506. [ 1.275644] usbcore: registered new device driver usb
  507. [ 1.275863] pps_core: LinuxPPS API ver. 1 registered
  508. [ 1.275872] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  509. [ 1.275889] PTP clock support registered
  510. [ 1.275907] EDAC MC: Ver: 3.0.0
  511. [ 1.276294] FPGA manager framework
  512. [ 1.276349] Advanced Linux Sound Architecture Driver Initialized.
  513. [ 1.276692] NetLabel: Initializing
  514. [ 1.276701] NetLabel: domain hash size = 128
  515. [ 1.276708] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  516. [ 1.276748] NetLabel: unlabeled traffic allowed by default
  517. [ 1.277047] clocksource: Switched to clocksource arch_sys_counter
  518. [ 1.277192] VFS: Disk quotas dquot_6.6.0
  519. [ 1.277238] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  520. [ 1.277308] FS-Cache: Loaded
  521. [ 1.277498] pnp: PnP ACPI: disabled
  522. [ 1.282134] NET: Registered protocol family 2
  523. [ 1.282469] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  524. [ 1.282503] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  525. [ 1.282669] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  526. [ 1.282863] TCP: Hash tables configured (established 32768 bind 32768)
  527. [ 1.282954] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  528. [ 1.282998] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  529. [ 1.283153] NET: Registered protocol family 1
  530. [ 1.283455] RPC: Registered named UNIX socket transport module.
  531. [ 1.283466] RPC: Registered udp transport module.
  532. [ 1.283473] RPC: Registered tcp transport module.
  533. [ 1.283480] RPC: Registered tcp NFSv4.1 backchannel transport module.
  534. [ 1.283491] NET: Registered protocol family 44
  535. [ 1.283505] PCI: CLS 0 bytes, default 64
  536. [ 1.283634] Trying to unpack rootfs image as initramfs...
  537. [ 1.703751] Freeing initrd memory: 10948K
  538. [ 1.755196] Initialise system trusted keyrings
  539. [ 1.755311] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  540. [ 1.758800] zbud: loaded
  541. [ 1.759685] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  542. [ 1.759872] FS-Cache: Netfs 'nfs' registered for caching
  543. [ 1.760228] NFS: Registering the id_resolver key type
  544. [ 1.760250] Key type id_resolver registered
  545. [ 1.760258] Key type id_legacy registered
  546. [ 1.760271] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  547. [ 1.760280] Installing knfsd (copyright (C) 1996 [email protected]).
  548. [ 1.761016] FS-Cache: Netfs 'cifs' registered for caching
  549. [ 1.761203] Key type cifs.spnego registered
  550. [ 1.761216] Key type cifs.idmap registered
  551. [ 1.761227] ntfs: driver 2.1.32 [Flags: R/W].
  552. [ 1.761590] JFS: nTxBlock = 8192, nTxLock = 65536
  553. [ 1.764346] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
  554. [ 1.765582] ocfs2: Registered cluster interface o2cb
  555. [ 1.765719] OCFS2 User DLM kernel interface loaded
  556. [ 1.766781] gfs2: GFS2 installed
  557. [ 1.779676] NET: Registered protocol family 38
  558. [ 1.779701] Key type asymmetric registered
  559. [ 1.779709] Asymmetric key parser 'x509' registered
  560. [ 1.779717] Asymmetric key parser 'pkcs8' registered
  561. [ 1.779756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  562. [ 1.779872] io scheduler mq-deadline registered
  563. [ 1.779882] io scheduler kyber registered
  564. [ 1.780000] io scheduler bfq registered
  565. [ 1.792302] soc soc0: Amlogic Meson G12B (S922X) Revision 29:a (40:2) Detected
  566. [ 1.793488] pwm-regulator: supplied by regulator-dummy
  567. [ 1.793640] VCC_3V3: supplied by VDDAO_3V3
  568. [ 1.793675] FLASH_1V8: supplied by VCC_3V3
  569. [ 1.793713] VCC_1V8: supplied by VCC_3V3
  570. [ 1.793750] VDDAO_1V8: supplied by VDDAO_3V3
  571. [ 1.793871] pwm-regulator: supplied by regulator-dummy
  572. [ 1.795922] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
  573. [ 1.797089] Serial: AMBA driver
  574. [ 1.797324] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
  575. [ 2.848149] printk: console [ttyAML0] enabled
  576. [ 2.852806] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 19, base_baud = 1500000) is a meson_uart
  577. [ 2.861849] serial serial0: tty port ttyAML6 registered
  578. [ 2.875339] brd: module loaded
  579. [ 2.880628] loop: module loaded
  580. [ 2.883876] libphy: Fixed MDIO Bus: probed
  581. [ 2.885477] VFIO - User Level meta-driver version: 0.3
  582. [ 2.888348] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  583. [ 2.893943] ehci-pci: EHCI PCI platform driver
  584. [ 2.898335] ehci-platform: EHCI generic platform driver
  585. [ 2.903592] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  586. [ 2.909620] ohci-pci: OHCI PCI platform driver
  587. [ 2.914032] ohci-platform: OHCI generic platform driver
  588. [ 2.919530] usbcore: registered new interface driver usb-storage
  589. [ 2.925237] mousedev: PS/2 mouse device common for all mice
  590. [ 2.931231] i2c /dev entries driver
  591. [ 2.938053] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 999999 KHz
  592. [ 2.941405] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 1000000 KHz
  593. [ 2.952441] sdhci: Secure Digital Host Controller Interface driver
  594. [ 2.955942] sdhci: Copyright(c) Pierre Ossman
  595. [ 2.960270] Synopsys Designware Multimedia Card Interface Driver
  596. [ 2.966592] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
  597. [ 3.000718] meson-gx-mmc ffe05000.sd: Got CD GPIO
  598. [ 3.030293] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
  599. [ 3.050436] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  600. [ 3.053571] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  601. [ 3.057917] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  602. [ 3.058088] sdhci-pltfm: SDHCI platform and OF driver helper
  603. [ 3.065300] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  604. [ 3.072349] ledtrig-cpu: registered to indicate activity on CPUs
  605. [ 3.079449] meson-sm: secure-monitor enabled
  606. [ 3.082627] hid: raw HID events driver (C) Jiri Kosina
  607. [ 3.087783] usbcore: registered new interface driver usbhid
  608. [ 3.093075] usbhid: USB HID core driver
  609. [ 3.096019] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
  610. [ 3.099523] no UART detected at 0x1
  611. [ 3.111490] NET: Registered protocol family 17
  612. [ 3.111781] Key type dns_resolver registered
  613. [ 3.114908] registered taskstats version 1
  614. [ 3.118614] Loading compiled-in X.509 certificates
  615. [ 3.123596] zswap: loaded using pool lzo/zbud
  616. [ 3.127825] Key type ._fscrypt registered
  617. [ 3.131626] Key type .fscrypt registered
  618. [ 3.135495] Key type fscrypt-provisioning registered
  619. [ 3.140985] Btrfs loaded, crc32c=crc32c-generic
  620. [ 3.149593] Key type encrypted registered
  621. [ 3.158309] VCC_5V: supplied by 12V
  622. [ 3.158599] USB1_POW: supplied by VCC_5V
  623. [ 3.160199] USB_PWR_EN: supplied by VCC_5V
  624. [ 3.179317] random: fast init done
  625. [ 3.183413] mmc0: new ultra high speed SDR50 SDIO card at address 0001
  626. [ 3.212681] mmc2: new high speed MMC card at address 0001
  627. [ 3.214550] mmcblk2: mmc2:0001 SLD64G 57.6 GiB
  628. [ 3.217700] mmcblk2boot0: mmc2:0001 SLD64G partition 1 4.00 MiB
  629. [ 3.223016] mmcblk2boot1: mmc2:0001 SLD64G partition 2 4.00 MiB
  630. [ 3.228858] mmcblk2rpmb: mmc2:0001 SLD64G partition 3 4.00 MiB, chardev (241:0)
  631. [ 3.229097] meson-drm ff900000.vpu: Queued 3 outputs on vpu
  632. [ 3.241580] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  633. [ 3.273244] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  634. [ 3.278348] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  635. [ 3.286785] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops)
  636. [ 3.295849] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
  637. [ 3.431676] [drm] kms: can't enable cloning when we probably wanted to.
  638. [ 3.591101] meson-dw-hdmi ff600000.hdmi-tx: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
  639. [ 3.591144] meson-dw-hdmi ff600000.hdmi-tx: colorspace: YCbCr 4:2:2
  640. [ 3.591176] meson-dw-hdmi ff600000.hdmi-tx: scan mode: Underscan
  641. [ 3.591206] meson-dw-hdmi ff600000.hdmi-tx: colorimetry: ITU709
  642. [ 3.591235] meson-dw-hdmi ff600000.hdmi-tx: picture aspect: 16:9
  643. [ 3.591264] meson-dw-hdmi ff600000.hdmi-tx: active aspect: Same as Picture
  644. [ 3.591291] meson-dw-hdmi ff600000.hdmi-tx: itc: No Data
  645. [ 3.591320] meson-dw-hdmi ff600000.hdmi-tx: extended colorimetry: xvYCC 709
  646. [ 3.591351] meson-dw-hdmi ff600000.hdmi-tx: quantization range: Default
  647. [ 3.591379] meson-dw-hdmi ff600000.hdmi-tx: nups: Unknown Non-uniform Scaling
  648. [ 3.591407] meson-dw-hdmi ff600000.hdmi-tx: video code: 16
  649. [ 3.591436] meson-dw-hdmi ff600000.hdmi-tx: ycc quantization range: Limited
  650. [ 3.591464] meson-dw-hdmi ff600000.hdmi-tx: hdmi content type: Graphics
  651. [ 3.591491] meson-dw-hdmi ff600000.hdmi-tx: pixel repeat: 0
  652. [ 3.591525] meson-dw-hdmi ff600000.hdmi-tx: bar top 0, bottom 0, left 0, right 0
  653. [ 3.591595] meson-dw-hdmi ff600000.hdmi-tx: HDMI infoframe: Source Product Description (SPD), version 1, length 25
  654. [ 3.591624] meson-dw-hdmi ff600000.hdmi-tx: vendor: DW
  655. [ 3.591652] meson-dw-hdmi ff600000.hdmi-tx: product: HDMI
  656. [ 3.591685] meson-dw-hdmi ff600000.hdmi-tx: source device information: PC General (0x9)
  657. [ 3.677062] Console: switching to colour frame buffer device 240x67
  658. [ 3.948908] meson-drm ff900000.vpu: fb0: mesondrmfb frame buffer device
  659. [ 3.957159] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
  660. [ 3.961922] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
  661. [ 3.968123] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
  662. [ 3.973996] meson8b-dwmac ff3f0000.ethernet: no reset control found
  663. [ 3.980747] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  664. [ 3.987280] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
  665. [ 3.992452] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
  666. [ 3.999871] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
  667. [ 4.007284] meson8b-dwmac ff3f0000.ethernet: COE Type 2
  668. [ 4.012459] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
  669. [ 4.019445] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
  670. [ 4.025848] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
  671. [ 4.031693] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
  672. [ 4.037472] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  673. [ 4.045558] libphy: stmmac: probed
  674. [ 4.049333] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
  675. [ 4.053956] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
  676. [ 4.061939] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
  677. [ 4.066262] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
  678. [ 4.073538] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
  679. [ 4.080768] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  680. [ 4.085702] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
  681. [ 4.093385] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
  682. [ 4.102606] xhci-hcd xhci-hcd.3.auto: irq 28, io mem 0xff500000
  683. [ 4.108583] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  684. [ 4.116657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  685. [ 4.123811] usb usb1: Product: xHCI Host Controller
  686. [ 4.128639] usb usb1: Manufacturer: Linux 5.7.0-rc2-arm-64 xhci-hcd
  687. [ 4.134849] usb usb1: SerialNumber: xhci-hcd.3.auto
  688. [ 4.140168] hub 1-0:1.0: USB hub found
  689. [ 4.143408] hub 1-0:1.0: 2 ports detected
  690. [ 4.147520] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  691. [ 4.152795] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
  692. [ 4.160401] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
  693. [ 4.166866] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  694. [ 4.174899] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
  695. [ 4.183065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  696. [ 4.190221] usb usb2: Product: xHCI Host Controller
  697. [ 4.195051] usb usb2: Manufacturer: Linux 5.7.0-rc2-arm-64 xhci-hcd
  698. [ 4.201265] usb usb2: SerialNumber: xhci-hcd.3.auto
  699. [ 4.206281] hub 2-0:1.0: USB hub found
  700. [ 4.209814] hub 2-0:1.0: 1 port detected
  701. [ 4.215133] printk: console [netcon0] enabled
  702. [ 4.218005] netconsole: network logging started
  703. [ 4.222926] ALSA device list:
  704. [ 4.225415] No soundcards found.
  705. [ 4.233741] Freeing unused kernel memory: 3904K
  706. [ 4.235233] Run /init as init process
  707. [ 4.398739] libphy: mdio_mux: probed
  708. [ 4.402324] meson-vrtc ff8000a8.rtc: registered as rtc0
  709. [ 4.403718] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
  710. [ 4.446890] libphy: mdio_mux: probed
  711. [ 4.485083] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  712. [ 4.521190] usb 1-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04
  713. [ 4.528831] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  714. [ 4.535882] usb 1-1: Product: 4-Port USB 2.0 Hub
  715. [ 4.540448] usb 1-1: Manufacturer: Generic
  716. [ 4.583068] hub 1-1:1.0: USB hub found
  717. [ 4.584933] hub 1-1:1.0: 4 ports detected
  718. [ 4.647041] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  719. [ 4.679159] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.04
  720. [ 4.683716] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  721. [ 4.683720] usb 2-1: Product: 4-Port USB 3.0 Hub
  722. [ 4.683722] usb 2-1: Manufacturer: Generic
  723. [ 4.714158] hub 2-1:1.0: USB hub found
  724. [ 4.716567] hub 2-1:1.0: 4 ports detected
  725. [ 5.018989] usb 2-1.2: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
  726. [ 5.067207] usb 2-1.2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 5.08
  727. [ 5.081279] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  728. [ 5.081298] usb 2-1.2: Product: USB to ATA/ATAPI Bridge
  729. [ 5.105372] usb 2-1.2: Manufacturer: JMicron
  730. [ 5.116703] usb 2-1.2: SerialNumber: 0123456789ABCDEF
  731. [ 5.140591] scsi host0: uas
  732. [ 5.143327] usbcore: registered new interface driver uas
  733. [ 5.144213] scsi 0:0:0:0: Direct-Access JMicron Generic 0508 PQ: 0 ANSI: 6
  734. [ 5.154399] sd 0:0:0:0: Attached scsi generic sg0 type 0
  735. [ 5.655403] sd 0:0:0:0: [sda] 39091248 512-byte logical blocks: (20.0 GB/18.6 GiB)
  736. [ 5.687396] sd 0:0:0:0: [sda] 4096-byte physical blocks
  737. [ 5.691408] sd 0:0:0:0: [sda] Write Protect is off
  738. [ 5.696469] sd 0:0:0:0: [sda] Disabling FUA
  739. [ 5.699917] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  740. [ 5.710345] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
  741. [ 5.736999] sda: sda1 sda2
  742. [ 5.750571] sd 0:0:0:0: [sda] Attached SCSI disk
  743. [ 5.887065] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback
  744. [ 6.178375] systemd[1]: System time before build time, advancing clock.
  745. [ 6.230855] NET: Registered protocol family 10
  746. [ 6.254368] Segment Routing with IPv6
  747. [ 6.271020] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  748. [ 6.293109] systemd[1]: Detected architecture arm64.
  749. [ 6.350831] systemd[1]: Set hostname to <arm-64>.
  750. [ 6.512148] random: systemd: uninitialized urandom read (16 bytes read)
  751. [ 6.516349] systemd[1]: Created slice User and Session Slice.
  752. [ 6.524906] random: systemd: uninitialized urandom read (16 bytes read)
  753. [ 6.528158] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  754. [ 6.537485] random: systemd: uninitialized urandom read (16 bytes read)
  755. [ 6.542147] systemd[1]: Reached target System Time Synchronized.
  756. [ 6.550106] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  757. [ 6.558290] systemd[1]: Created slice System Slice.
  758. [ 6.562937] systemd[1]: Listening on udev Kernel Socket.
  759. [ 6.568261] systemd[1]: Listening on Journal Socket.
  760. [ 6.647386] EXT4-fs (sda2): re-mounted. Opts: commit=600,errors=remount-ro
  761. [ 6.922303] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f5
  762. [ 6.927276] Mem abort info:
  763. [ 6.929986] ESR = 0x96000004
  764. [ 6.932759] EC = 0x25: DABT (current EL), IL = 32 bits
  765. [ 6.939615] SET = 0, FnV = 0
  766. [ 6.946536] EA = 0, S1PTW = 0
  767. [ 6.947931] Data abort info:
  768. [ 6.949280] ISV = 0, ISS = 0x00000004
  769. [ 6.949282] CM = 0, WnR = 0
  770. [ 6.949287] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000a220c000
  771. [ 6.956371] [00000000000000f5] pgd=0000000000000000
  772. [ 6.966305] Internal error: Oops: 96000004 [#1] PREEMPT SMP
  773. [ 6.966673] Bluetooth: Finished self testing
  774. [ 6.971730] Modules linked in: cfg80211(+) bluetooth(+) panfrost(+) crct10dif_ce(+) ecdh_generic meson_vdec(C) ecc ao_cec_g12a gpu_sched rfkill snd_soc_meson_axg_sound_card meson_ir v4l2_mem2mem rc_core videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 snd_soc_meson_g12a_tohdmitx dw_hdmi_cec videobuf2_common snd_soc_meson_axg_spdifout videodev meson_rng mc snd_soc_spdif_tx display_connector sch_fq_codel ip_tables x_tables ipv6 nf_defrag_ipv6 uas rtc_meson_vrtc mdio_mux_meson_g12a
  775. [ 6.971768] CPU: 3 PID: 494 Comm: systemd-udevd Tainted: G C 5.7.0-rc2-arm-64 #20.05.3
  776. [ 6.971769] Hardware name: Beelink GT-King (DT)
  777. [ 6.971772] pstate: 60000005 (nZCv daif -PAN -UAO)
  778. [ 6.971782] pc : dev_pm_opp_put_regulators+0x14/0xb0
  779. [ 6.971797] lr : panfrost_devfreq_init+0x8c/0x1e0 [panfrost]
  780. [ 6.971802] sp : ffff8000105338b0
  781. [ 6.976470] NET: Registered protocol family 31
  782. [ 7.018394] x29: ffff8000105338b0 x28: 00000000000001ce
  783. [ 7.018398] x27: ffff800012b297d0 x26: ffff80000a2c6750
  784. [ 7.018400] x25: ffff80000a2c6580 x24: 0000000000000035
  785. [ 7.018402] x23: ffff80000a2c61d8 x22: ffff800012b11908
  786. [ 7.018403] x21: ffff0000a162a080 x20: ffffffffffffffed
  787. [ 7.018405] x19: ffff0000a2df5010 x18: 00000000fffffff0
  788. [ 7.018406] x17: 0000000000000000 x16: 0000000000000000
  789. [ 7.018408] x15: ffff800012b27738 x14: 6f662029696c616d
  790. [ 7.018410] x13: 2820726f74616c75 x12: 0000000000000000
  791. [ 7.018411] x11: 0000000000000007 x10: 0101010101010101
  792. [ 7.018413] x9 : fffffffffffffffe x8 : 7f7f7f7f7f7f7f7f
  793. [ 7.018414] x7 : fefefeff646c606d x6 : 000000000000003f
  794. [ 7.018416] x5 : ffff0000a162b000 x4 : ffff0000a178de80
  795. [ 7.018418] x3 : ffff800012bf9d10 x2 : 0000000000000000
  796. [ 7.018419] x1 : 0000000000000000 x0 : ffffffffffffffed
  797. [ 7.018421] Call trace:
  798. [ 7.018433] dev_pm_opp_put_regulators+0x14/0xb0
  799. [ 7.018447] panfrost_devfreq_init+0x8c/0x1e0 [panfrost]
  800. [ 7.018453] panfrost_probe+0x108/0x1b8 [panfrost]
  801. [ 7.018461] platform_drv_probe+0x54/0xa8
  802. [ 7.018478] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  803. [ 7.028217] Bluetooth: HCI device and connection manager initialized
  804. [ 7.032024] really_probe+0xdc/0x440
  805. [ 7.032027] driver_probe_device+0xe0/0x138
  806. [ 7.032030] device_driver_attach+0x74/0x80
  807. [ 7.032031] __driver_attach+0xa4/0x170
  808. [ 7.032034] bus_for_each_dev+0x74/0xc8
  809. [ 7.032035] driver_attach+0x24/0x30
  810. [ 7.032037] bus_add_driver+0x19c/0x238
  811. [ 7.032039] driver_register+0x64/0x120
  812. [ 7.032041] __platform_driver_register+0x48/0x58
  813. [ 7.032056] panfrost_driver_init+0x24/0x1000 [panfrost]
  814. [ 7.032062] do_one_initcall+0x74/0x1c0
  815. [ 7.037283] Bluetooth: HCI socket layer initialized
  816. [ 7.041680] do_init_module+0x54/0x210
  817. [ 7.041683] load_module+0x1ca8/0x2010
  818. [ 7.047292] Bluetooth: L2CAP socket layer initialized
  819. [ 7.050561] __do_sys_finit_module+0xb4/0x118
  820. [ 7.050563] __arm64_sys_finit_module+0x20/0x30
  821. [ 7.050568] el0_svc_common.constprop.3+0x9c/0x1d8
  822. [ 7.054978] Bluetooth: SCO socket layer initialized
  823. [ 7.060221] do_el0_svc+0x24/0x90
  824. [ 7.060223] el0_sync_handler+0x150/0x2c0
  825. [ 7.060226] el0_sync+0x158/0x180
  826. [ 7.258001] Code: a9bd7bfd 910003fd a90153f3 aa0003f4 (f9408400)
  827. [ 7.258004] ---[ end trace bf5de461716dac2d ]---
  828. [ 7.278897] brcmfmac: F1 signature read @0x18000000=0x17224356
  829. [ 7.279593] Bluetooth: HCI UART driver ver 2.3
  830. [ 7.279597] Bluetooth: HCI UART protocol H4 registered
  831. [ 7.279599] Bluetooth: HCI UART protocol BCSP registered
  832. [ 7.279634] Bluetooth: HCI UART protocol LL registered
  833. [ 7.279635] Bluetooth: HCI UART protocol ATH3K registered
  834. [ 7.279648] Bluetooth: HCI UART protocol Three-wire (H5) registered
  835. [ 7.279845] Bluetooth: HCI UART protocol Intel registered
  836. [ 7.279964] Bluetooth: HCI UART protocol Broadcom registered
  837. [ 7.279980] Bluetooth: HCI UART protocol QCA registered
  838. [ 7.279981] Bluetooth: HCI UART protocol AG6XX registered
  839. [ 7.279997] Bluetooth: HCI UART protocol Marvell registered
  840. [ 7.280134] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
  841. [ 7.280208] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
  842. [ 7.285275] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
  843. [ 7.368887] usbcore: registered new interface driver brcmfmac
  844. [ 7.380005] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4356-sdio.azw,gtking.txt failed with error -2
  845. [ 7.486259] random: crng init done
  846. [ 7.486264] random: 7 urandom warning(s) missed due to ratelimiting
  847. [ 7.562600] zram: Added device: zram0
  848. [ 7.565671] zram: Added device: zram1
  849. [ 7.567903] zram: Added device: zram2
  850. [ 7.596586] zram1: detected capacity change from 0 to 1073741824
  851. [ 7.637117] Adding 1048572k swap on /dev/zram1. Priority:5 extents:1 across:1048572k SSFS
  852. [ 7.642161] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=29)
  853. [ 7.665086] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
  854. [ 7.665682] Bluetooth: hci0: BCM: chip id 101
  855. [ 7.669813] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
  856. [ 7.674490] Bluetooth: hci0: BCM: features 0x2f
  857. [ 7.680775] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
  858. [ 7.686736] Bluetooth: hci0: BCM4354A2
  859. [ 7.692429] zram0: detected capacity change from 0 to 52428800
  860. [ 7.702530] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
  861. [ 7.702595] bluetooth hci0: Direct firmware load for brcm/BCM4356A2.hcd failed with error -2
  862. [ 7.716721] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
  863. [ 7.716724] Bluetooth: hci0: BCM: Patch brcm/BCM4356A2.hcd not found
  864. [ 7.716776] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
  865. [ 7.745226] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: May 14 2014 19:51:52 version 7.35.17 (r477908) FWID 01-2ed3ee81
  866. [ 7.816464] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
  867. [ 7.821973] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
  868. [ 8.185696] systemd-journald[822]: Received request to flush runtime journal from PID 1
  869. [ 8.810065] EXT4-fs (sda2): resizing filesystem from 1144832 to 4702372 blocks
  870. [ 11.530713] EXT4-fs (sda2): resized filesystem to 4702372
  871. [ 13.545661] [drm] kms: can't enable cloning when we probably wanted to.
  872.  
  873.  
  874. Armbian 20.05.3 Bionic ttyAML0
  875.  
  876. arm-64 login:
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!