daily pastebin goal
51%
SHARE
TWEET

Untitled

a guest Dec 6th, 2015 98 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Booting Linux on physical CPU 0xf00
  2. [    0.000000] Linux version 4.3.0 (openelec.tv@nmacleod.com) (gcc version 5.2.0 (GCC) ) #1 SMP Fri Dec 4 21:02:56 GMT 2015
  3. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  4. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
  6. [    0.000000] cma: Reserved 8 MiB at 0x2a800000
  7. [    0.000000] Memory policy: Data cache writealloc
  8. [    0.000000] On node 0 totalpages: 176128
  9. [    0.000000] free_area_init_node: node 0, pgdat 80892240, node_mem_map aa292000
  10. [    0.000000]   Normal zone: 1376 pages used for memmap
  11. [    0.000000]   Normal zone: 0 pages reserved
  12. [    0.000000]   Normal zone: 176128 pages, LIFO batch:31
  13. [    0.000000] [bcm2709_smp_init_cpus] enter (93c0->f3003010)
  14. [    0.000000] [bcm2709_smp_init_cpus] ncores=4
  15. [    0.000000] PERCPU: Embedded 12 pages/cpu @aa254000 s17600 r8192 d23360 u49152
  16. [    0.000000] pcpu-alloc: s17600 r8192 d23360 u49152 alloc=12*4096
  17. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  18. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 174752
  19. [    0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=864 bcm2708_fb.fbheight=492 bcm2709.boardrev=0xa01041 bcm2709.serial=0x135143f6 smsc95xx.macaddr=B8:27:EB:51:43:F6 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
  20. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  21. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  22. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. [    0.000000] Memory: 680548K/704512K available (5219K kernel code, 300K rwdata, 1384K rodata, 1844K init, 392K bss, 15772K reserved, 8192K cma-reserved)
  24. [    0.000000] Virtual kernel memory layout:
  25. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  26. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  27. [    0.000000]     vmalloc : 0xab800000 - 0xff000000   (1336 MB)
  28. [    0.000000]     lowmem  : 0x80000000 - 0xab000000   ( 688 MB)
  29. [    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
  30. [    0.000000]       .text : 0x80008000 - 0x8067affc   (6604 kB)
  31. [    0.000000]       .init : 0x8067b000 - 0x80848000   (1844 kB)
  32. [    0.000000]       .data : 0x80848000 - 0x80893058   ( 301 kB)
  33. [    0.000000]        .bss : 0x80896000 - 0x808f83d4   ( 393 kB)
  34. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  35. [    0.000000] Hierarchical RCU implementation.
  36. [    0.000000]  Build-time adjustment of leaf fanout to 32.
  37. [    0.000000] NR_IRQS:608
  38. [    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
  39. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  40. [    0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  41. [    0.000031] Switching to timer-based delay loop, resolution 52ns
  42. [    0.000232] Console: colour dummy device 80x30
  43. [    0.000423] console [tty0] enabled
  44. [    0.000451] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
  45. [    0.000472] pid_max: default: 32768 minimum: 301
  46. [    0.000638] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  47. [    0.000657] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  48. [    0.001707] CPU: Testing write buffer coherency: ok
  49. [    0.002259] CPU0: update cpu_capacity 1024
  50. [    0.002278] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  51. [    0.002292] [bcm2709_smp_prepare_cpus] enter
  52. [    0.002389] Setting up static identity map for 0x8280 - 0x82b4
  53. [    0.004534] [bcm2709_boot_secondary] cpu:1 started (0) 17
  54. [    0.004898] [bcm2709_secondary_init] enter cpu:1
  55. [    0.004947] CPU1: update cpu_capacity 1024
  56. [    0.004955] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  57. [    0.005499] [bcm2709_boot_secondary] cpu:2 started (0) 17
  58. [    0.005780] [bcm2709_secondary_init] enter cpu:2
  59. [    0.005810] CPU2: update cpu_capacity 1024
  60. [    0.005818] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  61. [    0.006297] [bcm2709_boot_secondary] cpu:3 started (0) 18
  62. [    0.006552] [bcm2709_secondary_init] enter cpu:3
  63. [    0.006581] CPU3: update cpu_capacity 1024
  64. [    0.006588] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  65. [    0.006669] Brought up 4 CPUs
  66. [    0.006696] SMP: Total of 4 processors activated (153.00 BogoMIPS).
  67. [    0.006705] CPU: All CPU(s) started in HYP mode.
  68. [    0.006713] CPU: Virtualization extensions available.
  69. [    0.007321] devtmpfs: initialized
  70. [    0.029183] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  71. [    0.029479] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  72. [    0.030206] pinctrl core: initialized pinctrl subsystem
  73. [    0.030976] NET: Registered protocol family 16
  74. [    0.036803] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  75. [    0.046828] cpuidle: using governor ladder
  76. [    0.056854] cpuidle: using governor menu
  77. [    0.061921] Serial: AMBA PL011 UART driver
  78. [    0.062214] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
  79. [    0.062722] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  80. [    0.114949] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
  81. [    0.115809] bcm2835-dma 3f007000.dma: dma_debug:0
  82. [    0.116411] SCSI subsystem initialized
  83. [    0.116838] usbcore: registered new interface driver usbfs
  84. [    0.116941] usbcore: registered new interface driver hub
  85. [    0.117091] usbcore: registered new device driver usb
  86. [    0.120559] raspberrypi-firmware soc:firmware: Attached to firmware from 2015-11-30 20:58
  87. [    0.147949] clocksource: Switched to clocksource arch_sys_counter
  88. [    0.159517] NET: Registered protocol family 2
  89. [    0.160461] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  90. [    0.160596] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  91. [    0.160788] TCP: Hash tables configured (established 8192 bind 8192)
  92. [    0.160904] UDP hash table entries: 512 (order: 2, 16384 bytes)
  93. [    0.160966] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  94. [    0.161336] NET: Registered protocol family 1
  95. [    0.161752] RPC: Registered named UNIX socket transport module.
  96. [    0.161767] RPC: Registered udp transport module.
  97. [    0.161776] RPC: Registered tcp transport module.
  98. [    0.161786] RPC: Registered tcp NFSv4.1 backchannel transport module.
  99. [    0.300083] futex hash table entries: 1024 (order: 4, 65536 bytes)
  100. [    0.314880] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  101. [    0.317040] NFS: Registering the id_resolver key type
  102. [    0.317106] Key type id_resolver registered
  103. [    0.317118] Key type id_legacy registered
  104. [    0.317151] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  105. [    0.321656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  106. [    0.321688] io scheduler noop registered (default)
  107. [    0.321710] io scheduler deadline registered
  108. [    0.321759] io scheduler cfq registered
  109. [    0.323880] BCM2708FB: allocated DMA memory eac00000
  110. [    0.323923] BCM2708FB: allocated DMA channel 0 @ f3007000
  111. [    0.332226] Console: switching to colour frame buffer device 108x30
  112. [    0.337539] vc-cma: Videocore CMA driver
  113. [    0.337554] vc-cma: vc_cma_base      = 0x00000000
  114. [    0.337564] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
  115. [    0.337573] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
  116. [    0.337788] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  117. [    0.353602] brd: module loaded
  118. [    0.353793] loop: module loaded
  119. [    0.356430] nbd: registered device at major 43
  120. [    0.366260] vchiq: vchiq_init_state: slot_zero = 0xaac80000, is_master = 0
  121. [    0.368129] usbcore: registered new interface driver rtsx_usb
  122. [    0.368163] Loading iSCSI transport class v2.0-870.
  123. [    0.368740] iscsi: registered transport (tcp)
  124. [    0.369102] tun: Universal TUN/TAP device driver, 1.6
  125. [    0.369115] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  126. [    0.369470] usbcore: registered new interface driver dm9601
  127. [    0.369596] usbcore: registered new interface driver smsc95xx
  128. [    0.369710] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  129. [    0.570101] Core Release: 2.80a
  130. [    0.570122] Setting default values for core params
  131. [    0.570159] Finished setting default values for core params
  132. [    0.770557] Using Buffer DMA mode
  133. [    0.770571] Periodic Transfer Interrupt Enhancement - disabled
  134. [    0.770580] Multiprocessor Interrupt Enhancement - disabled
  135. [    0.770590] OTG VER PARAM: 0, OTG VER FLAG: 0
  136. [    0.770617] Dedicated Tx FIFOs mode
  137. [    0.770969] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xaac14000 dma = 0xeac14000 len=9024
  138. [    0.771006] FIQ FSM acceleration enabled for :
  139. [    0.771006] Non-periodic Split Transactions
  140. [    0.771006] Periodic Split Transactions
  141. [    0.771006] High-Speed Isochronous Endpoints
  142. [    0.771029] dwc_otg: Microframe scheduler enabled
  143. [    0.771090] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x803a67e8
  144. [    0.771107] WARN::hcd_init_fiq:414: FIQ ASM at 0x803a6b4c length 36
  145. [    0.771125] WARN::hcd_init_fiq:439: MPHI regs_base at 0xab8a4000
  146. [    0.771164] dwc_otg 3f980000.usb: DWC OTG Controller
  147. [    0.771213] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  148. [    0.771256] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
  149. [    0.771351] Init: Port Power? op_state=1
  150. [    0.771361] Init: Power Port (0)
  151. [    0.771597] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  152. [    0.771616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  153. [    0.771631] usb usb1: Product: DWC OTG Controller
  154. [    0.771645] usb usb1: Manufacturer: Linux 4.3.0 dwc_otg_hcd
  155. [    0.771659] usb usb1: SerialNumber: 3f980000.usb
  156. [    0.772463] hub 1-0:1.0: USB hub found
  157. [    0.772517] hub 1-0:1.0: 1 port detected
  158. [    0.772940] dwc_otg: FIQ enabled
  159. [    0.772952] dwc_otg: NAK holdoff enabled
  160. [    0.772960] dwc_otg: FIQ split-transaction FSM enabled
  161. [    0.773000] Module dwc_common_port init
  162. [    0.773273] usbcore: registered new interface driver uas
  163. [    0.773441] usbcore: registered new interface driver usb-storage
  164. [    0.773735] mousedev: PS/2 mouse device common for all mice
  165. [    0.773931] i2c /dev entries driver
  166. [    0.774698] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
  167. [    0.775595] bcm2835-cpufreq: min=600000 max=1050000
  168. [    0.778430] sdhci: Secure Digital Host Controller Interface driver
  169. [    0.778436] sdhci: Copyright(c) Pierre Ossman
  170. [    0.844624] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  171. [    0.844789] sdhci-pltfm: SDHCI platform and OF driver helper
  172. [    0.845273] hidraw: raw HID events driver (C) Jiri Kosina
  173. [    0.846936] usbcore: registered new interface driver usbhid
  174. [    0.846943] usbhid: USB HID core driver
  175. [    0.848107] NET: Registered protocol family 10
  176. [    0.848731] NET: Registered protocol family 17
  177. [    0.848827] Key type dns_resolver registered
  178. [    0.849174] Registering SWP/SWPB emulation handler
  179. [    0.849768] vc-sm: Videocore shared memory driver
  180. [    0.849780] [vc_sm_connected_init]: start
  181. [    0.864973] [vc_sm_connected_init]: end - returning 0
  182. [    0.865161] console [netcon0] enabled
  183. [    0.865167] netconsole: network logging started
  184. [    0.867398] Freeing unused kernel memory: 1844K (8067b000 - 80848000)
  185. [    0.924250] mmc0: host does not support reading read-only switch, assuming write-enable
  186. [    0.927911] mmc0: overclocking to 75000000Hz
  187. [    0.928089] mmc0: new high speed SDHC card at address aaaa
  188. [    0.928594] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
  189. [    0.929812]  mmcblk0: p1 p2
  190. [    0.971400] Indeed it is in host mode hprt0 = 00021501
  191. [    1.138037] usb 1-1: new high-speed USB device number 2 using dwc_otg
  192. [    1.138195] Indeed it is in host mode hprt0 = 00001101
  193. [    1.153361] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  194. [    1.153971] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  195. [    1.181849] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  196. [    1.318193] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  197. [    1.318210] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  198. [    1.318705] hub 1-1:1.0: USB hub found
  199. [    1.318774] hub 1-1:1.0: 5 ports detected
  200. [    1.597997] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  201. [    1.598013] random: systemd urandom read with 64 bits of entropy available
  202. [    1.606442] systemd[1]: systemd 228 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  203. [    1.606891] systemd[1]: Detected architecture arm.
  204. [    1.607051] systemd[1]: Running with unpopulated /etc.
  205. [    1.607207] systemd[1]: Set hostname to <OpenELEC>.
  206. [    1.607501] systemd[1]: Initializing machine ID from random generator.
  207. [    1.688358] systemd[1]: Populated /etc with preset unit settings.
  208. [    1.691574] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  209. [    1.691589] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  210. [    1.694127] smsc95xx v1.0.4
  211. [    1.733617] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:51:43:f6
  212. [    1.740242] systemd[1]: storage.mount: Unit is bound to inactive unit dev-mmcblk0p2.device. Stopping, too.
  213. [    1.765298] systemd[1]: Created slice User and Session Slice.
  214. [    1.802018] systemd[1]: Listening on udev Control Socket.
  215. [    1.802336] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  216. [    1.802622] systemd[1]: Listening on Journal Socket.
  217. [    1.802898] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  218. [    1.802965] systemd[1]: Reached target Paths.
  219. [    1.803099] systemd[1]: Listening on udev Kernel Socket.
  220. [    1.803243] systemd[1]: Listening on Journal Socket (/dev/log).
  221. [    1.803409] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  222. [    1.803655] systemd[1]: Created slice System Slice.
  223. [    1.805176] systemd[1]: Starting Remount Root and Kernel File Systems...
  224. [    1.807102] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  225. [    1.808967] systemd[1]: Mounting Variable Directory...
  226. [    1.811042] systemd[1]: Starting Show Version...
  227. [    1.811358] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  228. [    1.813613] systemd[1]: Starting Setup machine-id...
  229. [    1.814093] systemd[1]: Reached target Slices.
  230. [    1.816299] systemd[1]: Starting Mounting swapfile...
  231. [    1.820782] systemd[1]: Starting Load Kernel Modules...
  232. [    1.823644] systemd[1]: Mounting POSIX Message Queue File System...
  233. [    1.825710] systemd[1]: Mounting Debug File System...
  234. [    1.827673] systemd[1]: Mounting Temporary Directory...
  235. [    1.830072] systemd[1]: Started Remount Root and Kernel File Systems.
  236. [    1.831666] systemd[1]: Started Create list of required static device nodes for the current kernel.
  237. [    1.834226] systemd[1]: Starting Create Static Device Nodes in /dev...
  238. [    1.837414] systemd[1]: Starting udev Coldplug all Devices...
  239. [    1.875652] systemd[1]: Started Load Kernel Modules.
  240. [    1.912056] usb 1-1.2: New USB device found, idVendor=1b80, idProduct=e409
  241. [    1.912094] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  242. [    1.912110] usb 1-1.2: Product: DVB-T TV Stick
  243. [    1.912120] usb 1-1.2: Manufacturer: ITE Technologies, Inc.
  244. [    1.928040] systemd[1]: Mounted Debug File System.
  245. [    1.928325] systemd[1]: Mounted POSIX Message Queue File System.
  246. [    1.928815] systemd[1]: Mounted Variable Directory.
  247. [    1.928983] systemd[1]: Mounted Temporary Directory.
  248. [    1.933123] systemd[1]: Started Show Version.
  249. [    1.934365] systemd[1]: Started Setup machine-id.
  250. [    1.936914] systemd[1]: Started Create Static Device Nodes in /dev.
  251. [    1.991328] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
  252. [    2.064891] systemd[1]: Started udev Coldplug all Devices.
  253. [    2.066212] systemd[1]: Started Mounting swapfile.
  254. [    2.085896] usb 1-1.5: New USB device found, idVendor=05e3, idProduct=0608
  255. [    2.085914] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  256. [    2.085923] usb 1-1.5: Product: USB2.0 Hub
  257. [    2.086621] hub 1-1.5:1.0: USB hub found
  258. [    2.086890] hub 1-1.5:1.0: 4 ports detected
  259. [    2.165788] systemd[1]: Reached target Swap.
  260. [    2.165896] systemd[1]: Reached target Local File Systems (Pre).
  261. [    2.167710] systemd[1]: Starting Journal Service...
  262. [    2.170422] systemd[1]: Starting Setup Timezone data...
  263. [    2.170804] systemd[1]: Reached target Local File Systems.
  264. [    2.173929] systemd[1]: Starting Apply Kernel Variables...
  265. [    2.190012] systemd[1]: Started Setup Timezone data.
  266. [    2.203231] systemd[1]: Started Apply Kernel Variables.
  267. [    2.236645] systemd[1]: Started Journal Service.
  268. [    2.286400] systemd-journald[207]: Received request to flush runtime journal from PID 1
  269. [    2.354741] usb 1-1.5.3: new high-speed USB device number 6 using dwc_otg
  270. [    2.436085] usb 1-1.5.3: New USB device found, idVendor=05e3, idProduct=0608
  271. [    2.436115] usb 1-1.5.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  272. [    2.436130] usb 1-1.5.3: Product: USB2.0 Hub
  273. [    2.437216] hub 1-1.5.3:1.0: USB hub found
  274. [    2.437533] hub 1-1.5.3:1.0: 4 ports detected
  275. [    2.511351] usb 1-1.5.4: new low-speed USB device number 7 using dwc_otg
  276. [    2.598617] usb 1-1.5.4: New USB device found, idVendor=046e, idProduct=5578
  277. [    2.598636] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  278. [    2.598645] usb 1-1.5.4: Product: USB MCE Cordless Remote Control.
  279. [    2.598653] usb 1-1.5.4: Manufacturer: BTC
  280. [    2.602397] input: BTC USB MCE Cordless Remote Control. as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/0003:046E:5578.0001/input/input0
  281. [    2.655158] topseed 0003:046E:5578.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB MCE Cordless Remote Control.] on usb-3f980000.usb-1.5.4/input0
  282. [    2.661778] input: BTC USB MCE Cordless Remote Control. as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.1/0003:046E:5578.0002/input/input1
  283. [    2.711342] usb 1-1.5.3.3: new high-speed USB device number 8 using dwc_otg
  284. [    2.715263] topseed 0003:046E:5578.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [BTC USB MCE Cordless Remote Control.] on usb-3f980000.usb-1.5.4/input1
  285. [    2.796785] usb 1-1.5.3.3: New USB device found, idVendor=090c, idProduct=1000
  286. [    2.796804] usb 1-1.5.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  287. [    2.796813] usb 1-1.5.3.3: Product: USB Flash Disk
  288. [    2.796821] usb 1-1.5.3.3: Manufacturer: General
  289. [    2.796829] usb 1-1.5.3.3: SerialNumber: 0107000000011111
  290. [    2.798191] usb-storage 1-1.5.3.3:1.0: USB Mass Storage device detected
  291. [    2.801386] scsi host0: usb-storage 1-1.5.3.3:1.0
  292. [    3.383639] Console: switching to colour dummy device 80x30
  293. [    3.609337] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered
  294. [    3.609381] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
  295. [    3.964179] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  296. [    3.964324] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  297. [    4.104763] scsi 0:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 6
  298. [    4.105754] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered
  299. [    4.105772] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
  300. [    4.107611] sd 0:0:0:0: [sda] 31490048 512-byte logical blocks: (16.1 GB/15.0 GiB)
  301. [    4.109551] sd 0:0:0:0: [sda] Write Protect is off
  302. [    4.109575] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
  303. [    4.110539] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  304. [    4.118202]  sda: sda1
  305. [    4.121877] sd 0:0:0:0: [sda] Attached SCSI removable disk
  306. [    5.147230] random: nonblocking pool is initialized
  307. [    5.494675] usb 1-1.2: dvb_usb_v2: 2nd usb_bulk_msg() failed=-110
  308. [    5.494713] dvb_usb_af9035: probe of 1-1.2:1.0 failed with error -110
  309. [    5.494833] usbcore: registered new interface driver dvb_usb_af9035
  310. [    5.512424] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  311. [    5.513048] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered
  312. [    5.513068] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
  313. [    5.518481] snd-rpi-hifiberry-dacplus sound: ASoC: CODEC DAI pcm512x-hifi not registered
  314. [    5.518502] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
  315. [    5.520662] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  316. [    5.520893] snd-rpi-hifiberry-dacplus sound: ASoC: CODEC DAI pcm512x-hifi not registered
  317. [    5.520906] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
  318. [    5.576437] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  319. [    5.577768] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
  320. [    5.583847] snd-rpi-hifiberry-dacplus sound: pcm512x-hifi <-> 3f203000.i2s mapping ok
  321. [    5.616276] 8021q: 802.1Q VLAN Support v1.8
  322. [    5.686077] pcm512x 1-004d: No SCLK, using BCLK: -2
  323. [    5.698571] pcm512x 1-004d: No SCLK, using BCLK: -2
  324. [    5.703936] pcm512x 1-004d: No SCLK, using BCLK: -2
  325. [    5.707551] pcm512x 1-004d: No SCLK, using BCLK: -2
  326. [    5.711637] pcm512x 1-004d: No SCLK, using BCLK: -2
  327. [    5.978478] pcm512x 1-004d: No SCLK, using BCLK: -2
  328. [    5.998166] input: eventlircd as /devices/virtual/input/input3
  329. [    6.191744] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  330. [    7.451825] ------------[ cut here ]------------
  331. [    7.451863] WARNING: CPU: 0 PID: 0 at include/asm-generic/dma-mapping-common.h:274 bcm2835_dma_desc_free+0xc0/0xc4()
  332. [    7.451870] Modules linked in: 8021q snd_soc_pcm512x_i2c snd_soc_pcm512x regmap_i2c bcm2835_wdt snd_soc_bcm2835_i2s regmap_mmio bcm2835_gpiomem snd_soc_hifiberry_dacplus snd_soc_hifiberry_dac snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd clk_hifiberry_dacpro dvb_usb_af9035 dvb_usb_v2 dvb_core rc_core
  333. [    7.451932] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0 #1
  334. [    7.451939] Hardware name: BCM2709
  335. [    7.451944] Backtrace:
  336. [    7.451965] [<80012720>] (dump_backtrace) from [<80012918>] (show_stack+0x18/0x1c)
  337. [    7.451971]  r7:802d638c r6:00000112 r5:8087b220 r4:00000000
  338. [    7.451992] [<80012900>] (show_stack) from [<80296d68>] (dump_stack+0x88/0x98)
  339. [    7.452005] [<80296ce0>] (dump_stack) from [<8001de80>] (warn_slowpath_common+0x88/0xb8)
  340. [    7.452010]  r5:00000009 r4:00000000
  341. [    7.452025] [<8001ddf8>] (warn_slowpath_common) from [<8001df54>] (warn_slowpath_null+0x24/0x2c)
  342. [    7.452030]  r8:ea811000 r7:aa811000 r6:00000060 r5:a9d78c10 r4:a53dc280
  343. [    7.452053] [<8001df30>] (warn_slowpath_null) from [<802d638c>] (bcm2835_dma_desc_free+0xc0/0xc4)
  344. [    7.452066] [<802d62cc>] (bcm2835_dma_desc_free) from [<802d6410>] (bcm2835_dma_terminate_all+0x80/0x1e8)
  345. [    7.452072]  r9:a9da8810 r8:a9d57a1c r7:80849c80 r6:a0000193 r5:a9d57790 r4:a9d579d0
  346. [    7.452102] [<802d6390>] (bcm2835_dma_terminate_all) from [<7f06d0e0>] (snd_dmaengine_pcm_trigger+0x68/0x180 [snd_pcm_dmaengine])
  347. [    7.452108]  r8:a96de30c r7:a92f2d80 r6:a50c4180 r5:a9e9fc00 r4:00000001
  348. [    7.452150] [<7f06d078>] (snd_dmaengine_pcm_trigger [snd_pcm_dmaengine]) from [<7f0807e0>] (soc_pcm_trigger+0xa4/0x124 [snd_soc_core])
  349. [    7.452156]  r7:a92f2d80 r6:00000000 r5:a9e9fc00 r4:00000001
  350. [    7.452196] [<7f08073c>] (soc_pcm_trigger [snd_soc_core]) from [<7f0569dc>] (snd_pcm_do_stop+0x58/0x5c [snd_pcm])
  351. [    7.452202]  r9:0000f9d0 r8:a9e9fc00 r7:00000001 r6:a9e9fc00 r5:7f060958 r4:0000f9c9
  352. [    7.452236] [<7f056984>] (snd_pcm_do_stop [snd_pcm]) from [<7f056770>] (snd_pcm_action_single+0x40/0x88 [snd_pcm])
  353. [    7.452262] [<7f056730>] (snd_pcm_action_single [snd_pcm]) from [<7f0599e8>] (snd_pcm_drain_done+0x1c/0x24 [snd_pcm])
  354. [    7.452268]  r7:44e80000 r6:a534c000 r5:0000f12c r4:0000f9c9
  355. [    7.452303] [<7f0599cc>] (snd_pcm_drain_done [snd_pcm]) from [<7f05cfe4>] (snd_pcm_update_state+0xd8/0x108 [snd_pcm])
  356. [    7.452331] [<7f05cf0c>] (snd_pcm_update_state [snd_pcm]) from [<7f05d1c4>] (snd_pcm_update_hw_ptr0+0x1b0/0x3a4 [snd_pcm])
  357. [    7.452337]  r5:0000f12c r4:a5324800
  358. [    7.452368] [<7f05d014>] (snd_pcm_update_hw_ptr0 [snd_pcm]) from [<7f05d460>] (snd_pcm_period_elapsed+0xa8/0xd0 [snd_pcm])
  359. [    7.452374]  r10:80848000 r9:a9d579d0 r8:808969c0 r7:80842154 r6:60000113 r5:a5324800
  360. [    7.452391]  r4:a9e9fc00
  361. [    7.452413] [<7f05d3b8>] (snd_pcm_period_elapsed [snd_pcm]) from [<7f06d3c4>] (dmaengine_pcm_dma_complete+0x4c/0x50 [snd_pcm_dmaengine])
  362. [    7.452420]  r7:80842154 r6:00000000 r5:a9d57a08 r4:80849df0
  363. [    7.452442] [<7f06d378>] (dmaengine_pcm_dma_complete [snd_pcm_dmaengine]) from [<802d55b4>] (vchan_complete+0x9c/0xf8)
  364. [    7.452456] [<802d5518>] (vchan_complete) from [<80020b90>] (tasklet_action+0x80/0x110)
  365. [    7.452461]  r9:80849e20 r8:808969c0 r7:80842154 r6:00000000 r5:a9d57a08 r4:a9d57a04
  366. [    7.452485] [<80020b10>] (tasklet_action) from [<80020da0>] (__do_softirq+0x124/0x238)
  367. [    7.452490]  r10:40000006 r9:8084a080 r8:00000006 r7:00000100 r6:80848000 r5:8084a098
  368. [    7.452507]  r4:00000000 r3:80020b10
  369. [    7.452522] [<80020c7c>] (__do_softirq) from [<80021198>] (irq_exit+0xb8/0x120)
  370. [    7.452527]  r10:80520780 r9:80849f70 r8:00000000 r7:00000000 r6:00000000 r5:00000000
  371. [    7.452544]  r4:80842fd0
  372. [    7.452557] [<800210e0>] (irq_exit) from [<8005aab0>] (__handle_domain_irq+0x90/0xe4)
  373. [    7.452562]  r5:00000000 r4:80842fd0
  374. [    7.452577] [<8005aa20>] (__handle_domain_irq) from [<80009020>] (asm_do_IRQ+0x20/0x24)
  375. [    7.452583]  r9:80849f70 r8:80866c40 r7:80849f34 r6:f300b200 r5:60000013 r4:80010020
  376. [    7.452606] [<80009000>] (asm_do_IRQ) from [<80013470>] (__irq_svc+0x30/0x124)
  377. [    7.452614] Exception stack(0x80849f00 to 0x80849f48)
  378. [    7.452625] 9f00: 00000001 00000000 00000001 8001a5e0 80848000 80866bf8 00000000 00000000
  379. [    7.452636] 9f20: 80866c40 80849f70 80520780 80849f5c 80849f60 80849f50 8001001c 80010020
  380. [    7.452642] 9f40: 60000013 ffffffff
  381. [    7.452657] [<8000ffe0>] (arch_cpu_idle) from [<80053200>] (default_idle_call+0x28/0x34)
  382. [    7.452670] [<800531d8>] (default_idle_call) from [<80053380>] (cpu_startup_entry+0x174/0x268)
  383. [    7.452685] [<8005320c>] (cpu_startup_entry) from [<80519d24>] (rest_init+0x80/0x84)
  384. [    7.452691]  r7:80866b80
  385. [    7.452706] [<80519ca4>] (rest_init) from [<8067bd20>] (start_kernel+0x3a4/0x3b0)
  386. [    7.452716] [<8067b97c>] (start_kernel) from [<0000807c>] (0x807c)
  387. [    7.452722] ---[ end trace 5b3e3cba4a9a6f9d ]---
  388. [    7.466001] pcm512x 1-004d: No SCLK, using BCLK: -2
  389. [    7.470687] pcm512x 1-004d: No SCLK, using BCLK: -2
  390. [    7.475240] pcm512x 1-004d: No SCLK, using BCLK: -2
  391. [    7.478900] pcm512x 1-004d: No SCLK, using BCLK: -2
  392. [    7.482755] pcm512x 1-004d: No SCLK, using BCLK: -2
  393. [    7.522627] pcm512x 1-004d: No SCLK, using BCLK: -2
  394. [   67.734436] ------------[ cut here ]------------
  395. [   67.734494] WARNING: CPU: 0 PID: 737 at include/asm-generic/dma-mapping-common.h:274 bcm2835_dma_desc_free+0xc0/0xc4()
  396. [   67.734505] Modules linked in: 8021q snd_soc_pcm512x_i2c snd_soc_pcm512x regmap_i2c bcm2835_wdt snd_soc_bcm2835_i2s regmap_mmio bcm2835_gpiomem snd_soc_hifiberry_dacplus snd_soc_hifiberry_dac snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd clk_hifiberry_dacpro dvb_usb_af9035 dvb_usb_v2 dvb_core rc_core
  397. [   67.734610] CPU: 0 PID: 737 Comm: LanguageInvoker Tainted: G        W       4.3.0 #1
  398. [   67.734621] Hardware name: BCM2709
  399. [   67.734630] Backtrace:
  400. [   67.734660] [<80012720>] (dump_backtrace) from [<80012918>] (show_stack+0x18/0x1c)
  401. [   67.734671]  r7:802d638c r6:00000112 r5:8087b220 r4:00000000
  402. [   67.734707] [<80012900>] (show_stack) from [<80296d68>] (dump_stack+0x88/0x98)
  403. [   67.734729] [<80296ce0>] (dump_stack) from [<8001de80>] (warn_slowpath_common+0x88/0xb8)
  404. [   67.734739]  r5:00000009 r4:00000000
  405. [   67.734765] [<8001ddf8>] (warn_slowpath_common) from [<8001df54>] (warn_slowpath_null+0x24/0x2c)
  406. [   67.734775]  r8:ea810000 r7:aa810000 r6:00000060 r5:a9d78c10 r4:a948ae00
  407. [   67.734814] [<8001df30>] (warn_slowpath_null) from [<802d638c>] (bcm2835_dma_desc_free+0xc0/0xc4)
  408. [   67.734837] [<802d62cc>] (bcm2835_dma_desc_free) from [<802d6410>] (bcm2835_dma_terminate_all+0x80/0x1e8)
  409. [   67.734847]  r9:a9da8810 r8:a9d57a1c r7:a503fd30 r6:a00f0193 r5:a9d57790 r4:a9d579d0
  410. [   67.734898] [<802d6390>] (bcm2835_dma_terminate_all) from [<7f06d0e0>] (snd_dmaengine_pcm_trigger+0x68/0x180 [snd_pcm_dmaengine])
  411. [   67.734908]  r8:a96de30c r7:a92f2d80 r6:a50c4ec0 r5:a9e9fc00 r4:00000001
  412. [   67.734978] [<7f06d078>] (snd_dmaengine_pcm_trigger [snd_pcm_dmaengine]) from [<7f0807e0>] (soc_pcm_trigger+0xa4/0x124 [snd_soc_core])
  413. [   67.734989]  r7:a92f2d80 r6:00000000 r5:a9e9fc00 r4:00000001
  414. [   67.735056] [<7f08073c>] (soc_pcm_trigger [snd_soc_core]) from [<7f0569dc>] (snd_pcm_do_stop+0x58/0x5c [snd_pcm])
  415. [   67.735066]  r9:00288268 r8:a9e9fc00 r7:00000001 r6:a9e9fc00 r5:7f060958 r4:002879c7
  416. [   67.735126] [<7f056984>] (snd_pcm_do_stop [snd_pcm]) from [<7f056770>] (snd_pcm_action_single+0x40/0x88 [snd_pcm])
  417. [   67.735170] [<7f056730>] (snd_pcm_action_single [snd_pcm]) from [<7f0599e8>] (snd_pcm_drain_done+0x1c/0x24 [snd_pcm])
  418. [   67.735181]  r7:44e80000 r6:a534d000 r5:00288264 r4:002879c7
  419. [   67.735242] [<7f0599cc>] (snd_pcm_drain_done [snd_pcm]) from [<7f05cfe4>] (snd_pcm_update_state+0xd8/0x108 [snd_pcm])
  420. [   67.735292] [<7f05cf0c>] (snd_pcm_update_state [snd_pcm]) from [<7f05d1c4>] (snd_pcm_update_hw_ptr0+0x1b0/0x3a4 [snd_pcm])
  421. [   67.735302]  r5:00288264 r4:a5324800
  422. [   67.735357] [<7f05d014>] (snd_pcm_update_hw_ptr0 [snd_pcm]) from [<7f05d460>] (snd_pcm_period_elapsed+0xa8/0xd0 [snd_pcm])
  423. [   67.735367]  r10:a503e000 r9:a9d579d0 r8:808969c0 r7:80842154 r6:600f0113 r5:a5324800
  424. [   67.735396]  r4:a9e9fc00
  425. [   67.735435] [<7f05d3b8>] (snd_pcm_period_elapsed [snd_pcm]) from [<7f06d3c4>] (dmaengine_pcm_dma_complete+0x4c/0x50 [snd_pcm_dmaengine])
  426. [   67.735446]  r7:80842154 r6:00000000 r5:a9d57a08 r4:a503fea0
  427. [   67.735484] [<7f06d378>] (dmaengine_pcm_dma_complete [snd_pcm_dmaengine]) from [<802d55b4>] (vchan_complete+0x9c/0xf8)
  428. [   67.735507] [<802d5518>] (vchan_complete) from [<80020b90>] (tasklet_action+0x80/0x110)
  429. [   67.735518]  r9:a503fed0 r8:808969c0 r7:80842154 r6:00000000 r5:a9d57a08 r4:a9d57a04
  430. [   67.735558] [<80020b10>] (tasklet_action) from [<80020da0>] (__do_softirq+0x124/0x238)
  431. [   67.735568]  r10:40000006 r9:8084a080 r8:00000006 r7:00000100 r6:a503e000 r5:8084a098
  432. [   67.735597]  r4:00000000 r3:80020b10
  433. [   67.735623] [<80020c7c>] (__do_softirq) from [<80021198>] (irq_exit+0xb8/0x120)
  434. [   67.735633]  r10:00000000 r9:6cef8728 r8:00000000 r7:00000000 r6:00000000 r5:00000000
  435. [   67.735661]  r4:80842fd0
  436. [   67.735683] [<800210e0>] (irq_exit) from [<8005aab0>] (__handle_domain_irq+0x90/0xe4)
  437. [   67.735693]  r5:00000000 r4:80842fd0
  438. [   67.735718] [<8005aa20>] (__handle_domain_irq) from [<80009020>] (asm_do_IRQ+0x20/0x24)
  439. [   67.735728]  r9:6cef8728 r8:10c5387d r7:10c5387d r6:f300b200 r5:600f0010 r4:0077a528
  440. [   67.735766] [<80009000>] (asm_do_IRQ) from [<800137f8>] (__irq_usr+0x38/0x140)
  441. [   67.735779] Exception stack(0xa503ffb0 to 0xa503fff8)
  442. [   67.735794] ffa0:                                     00000000 00000000 00000000 00000000
  443. [   67.735813] ffc0: 6cef8688 00000000 00000000 00000000 00000000 6cef8728 00000000 6cef86ec
  444. [   67.735829] ffe0: 72e22b00 6cef8680 0077a13c 0077a528 600f0010 ffffffff
  445. [   67.735840] ---[ end trace 5b3e3cba4a9a6f9e ]---
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top