API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Nov 8th, 2021
402
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.98 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
  2. [ 0.000000] Linux version 5.10.76 (jenkins@tsuboi) (aarch64-none-linux-gnu-gcc.real (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP Sat Oct 30 00:03:05 CEST 2021
  3. [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
  4. [ 0.000000] efi: UEFI not found.
  5. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB
  6. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  7. [ 0.000000] Zone ranges:
  8. [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
  9. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
  10. [ 0.000000] Normal empty
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
  14. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
  15. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
  16. [ 0.000000] On node 0 totalpages: 1012736
  17. [ 0.000000] DMA zone: 3792 pages used for memmap
  18. [ 0.000000] DMA zone: 0 pages reserved
  19. [ 0.000000] DMA zone: 242688 pages, LIFO batch:63
  20. [ 0.000000] DMA32 zone: 12032 pages used for memmap
  21. [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63
  22. [ 0.000000] percpu: Embedded 31 pages/cpu s86552 r8192 d32232 u126976
  23. [ 0.000000] pcpu-alloc: s86552 r8192 d32232 u126976 alloc=31*4096
  24. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  25. [ 0.000000] Detected PIPT I-cache on CPU0
  26. [ 0.000000] CPU features: detected: Spectre-v2
  27. [ 0.000000] CPU features: detected: Spectre-v4
  28. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  29. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
  30. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:09:6D:17 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=3010-5350 disk=UUID=a8e8a687-3b0f-472c-a2e4-3e8c903fd088 quiet
  31. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  32. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  33. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  34. [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
  35. [ 0.000000] Memory: 3352556K/4050944K available (12736K kernel code, 2046K rwdata, 3588K rodata, 8320K init, 909K bss, 174100K reserved, 524288K cma-reserved)
  36. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  37. [ 0.000000] ftrace: allocating 37982 entries in 149 pages
  38. [ 0.000000] ftrace: allocated 149 pages with 4 groups
  39. [ 0.000000] rcu: Hierarchical RCU implementation.
  40. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  41. [ 0.000000] Rude variant of Tasks RCU enabled.
  42. [ 0.000000] Tracing variant of Tasks RCU enabled.
  43. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
  44. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  45. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  46. [ 0.000000] GIC: Using split EOI/Deactivate mode
  47. [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
  48. [ 0.000000] random: get_random_bytes called from start_kernel+0x648/0x7fc with crng_init=0
  49. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  50. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  51. [ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  52. [ 0.000276] Console: colour dummy device 80x25
  53. [ 0.000335] printk: console [tty0] enabled
  54. [ 0.000383] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)
  55. [ 0.000408] pid_max: default: 32768 minimum: 301
  56. [ 0.000655] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  57. [ 0.000731] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  58. [ 0.001969] cgroup: Disabling memory control group subsystem
  59. [ 0.003705] rcu: Hierarchical SRCU implementation.
  60. [ 0.004971] EFI services will not be available.
  61. [ 0.005381] smp: Bringing up secondary CPUs ...
  62. [ 0.006157] Detected PIPT I-cache on CPU1
  63. [ 0.006240] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
  64. [ 0.007164] Detected PIPT I-cache on CPU2
  65. [ 0.007212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
  66. [ 0.008013] Detected PIPT I-cache on CPU3
  67. [ 0.008059] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
  68. [ 0.008176] smp: Brought up 1 node, 4 CPUs
  69. [ 0.008189] SMP: Total of 4 processors activated.
  70. [ 0.008202] CPU features: detected: 32-bit EL0 Support
  71. [ 0.008214] CPU features: detected: CRC32 instructions
  72. [ 0.050901] CPU: All CPU(s) started at EL2
  73. [ 0.050974] alternatives: patching kernel code
  74. [ 0.052566] devtmpfs: initialized
  75. [ 0.062377] Enabled cp15_barrier support
  76. [ 0.062411] Enabled setend support
  77. [ 0.062596] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  78. [ 0.062623] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  79. [ 0.076771] pinctrl core: initialized pinctrl subsystem
  80. [ 0.077609] DMI not present or invalid.
  81. [ 0.077956] NET: Registered protocol family 16
  82. [ 0.080572] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  83. [ 0.080843] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  84. [ 0.081628] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  85. [ 0.082124] thermal_sys: Registered thermal governor 'step_wise'
  86. [ 0.082621] cpuidle: using governor menu
  87. [ 0.082764] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  88. [ 0.082901] ASID allocator initialised with 65536 entries
  89. [ 0.083027] Serial: AMBA PL011 UART driver
  90. [ 0.114275] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  91. [ 0.120727] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-10-28T14:15:04, variant start_x
  92. [ 0.124069] raspberrypi-firmware soc:firmware: Firmware hash is bcdfe55d56b75b4be52c10d73bdb4a60e2b49f75
  93. [ 0.150189] cryptd: max_cpu_qlen set to 1000
  94. [ 0.157303] vgaarb: loaded
  95. [ 0.157763] SCSI subsystem initialized
  96. [ 0.157956] usbcore: registered new interface driver usbfs
  97. [ 0.158002] usbcore: registered new interface driver hub
  98. [ 0.158068] usbcore: registered new device driver usb
  99. [ 0.158620] Advanced Linux Sound Architecture Driver Initialized.
  100. [ 0.159587] clocksource: Switched to clocksource arch_sys_counter
  101. [ 1.133321] FS-Cache: Loaded
  102. [ 1.141817] NET: Registered protocol family 2
  103. [ 1.142474] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  104. [ 1.145833] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  105. [ 1.145884] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  106. [ 1.146107] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  107. [ 1.146737] TCP: Hash tables configured (established 32768 bind 32768)
  108. [ 1.147013] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  109. [ 1.147082] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  110. [ 1.147384] NET: Registered protocol family 1
  111. [ 1.148159] RPC: Registered named UNIX socket transport module.
  112. [ 1.148170] RPC: Registered udp transport module.
  113. [ 1.148178] RPC: Registered tcp transport module.
  114. [ 1.148187] RPC: Registered tcp NFSv4.1 backchannel transport module.
  115. [ 1.148205] PCI: CLS 0 bytes, default 64
  116. [ 1.166076] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  117. [ 1.170403] Initialise system trusted keyrings
  118. [ 1.170635] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  119. [ 1.177455] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  120. [ 1.178040] FS-Cache: Netfs 'nfs' registered for caching
  121. [ 1.178698] NFS: Registering the id_resolver key type
  122. [ 1.178739] Key type id_resolver registered
  123. [ 1.178749] Key type id_legacy registered
  124. [ 1.178856] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  125. [ 1.178869] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  126. [ 1.179526] FS-Cache: Netfs 'cifs' registered for caching
  127. [ 1.179872] Key type cifs.idmap registered
  128. [ 1.246015] NET: Registered protocol family 38
  129. [ 1.246032] Key type asymmetric registered
  130. [ 1.246042] Asymmetric key parser 'x509' registered
  131. [ 1.246093] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  132. [ 1.246106] io scheduler mq-deadline registered
  133. [ 1.246115] io scheduler kyber registered
  134. [ 1.246262] io scheduler bfq registered
  135. [ 1.250054] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  136. [ 1.250083] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  137. [ 1.250139] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
  138. [ 1.250202] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
  139. [ 1.291679] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
  140. [ 1.291948] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  141. [ 1.291965] pci_bus 0000:00: root bus resource [bus 00-ff]
  142. [ 1.291981] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
  143. [ 1.292060] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  144. [ 1.292239] pci 0000:00:00.0: PME# supported from D0 D3hot
  145. [ 1.296016] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  146. [ 1.296129] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  147. [ 1.296541] pci 0000:01:00.0: PME# supported from D0 D3cold
  148. [ 1.300008] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  149. [ 1.300028] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  150. [ 1.300101] pci 0000:00:00.0: PCI bridge to [bus 01]
  151. [ 1.300121] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  152. [ 1.300445] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  153. [ 1.300652] pcieport 0000:00:00.0: PME: Signaling with IRQ 65
  154. [ 1.301045] pcieport 0000:00:00.0: AER: enabled with IRQ 65
  155. [ 1.308326] iproc-rng200 fe104000.rng: hwrng registered
  156. [ 1.308640] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  157. [ 1.363127] vc4-drm gpu: bound fe400000.hvs (ops 0xffffffc010d21850)
  158. [ 1.363871] cacheinfo: Unable to detect cache hierarchy for CPU 0
  159. [ 1.372862] brd: module loaded
  160. [ 1.373012] loop: module loaded
  161. [ 1.393015] usbcore: registered new interface driver rtsx_usb
  162. [ 1.394493] Loading iSCSI transport class v2.0-870.
  163. [ 1.395171] iscsi: registered transport (tcp)
  164. [ 1.396595] libphy: Fixed MDIO Bus: probed
  165. [ 1.397067] tun: Universal TUN/TAP device driver, 1.6
  166. [ 1.397833] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  167. [ 1.409609] libphy: bcmgenet MII bus: probed
  168. [ 1.463035] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  169. [ 1.463945] usbcore: registered new interface driver lan78xx
  170. [ 1.463987] usbcore: registered new interface driver dm9601
  171. [ 1.464039] usbcore: registered new interface driver smsc95xx
  172. [ 1.465603] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
  173. [ 1.465770] xhci_hcd 0000:01:00.0: xHCI Host Controller
  174. [ 1.465800] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  175. [ 1.466638] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
  176. [ 1.467368] xhci_hcd 0000:01:00.0: xHCI Host Controller
  177. [ 1.467389] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  178. [ 1.467410] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  179. [ 1.467708] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  180. [ 1.467721] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  181. [ 1.467732] usb usb1: Product: xHCI Host Controller
  182. [ 1.467743] usb usb1: Manufacturer: Linux 5.10.76 xhci-hcd
  183. [ 1.467754] usb usb1: SerialNumber: 0000:01:00.0
  184. [ 1.468339] hub 1-0:1.0: USB hub found
  185. [ 1.468430] hub 1-0:1.0: 1 port detected
  186. [ 1.469243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  187. [ 1.469256] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  188. [ 1.469267] usb usb2: Product: xHCI Host Controller
  189. [ 1.469277] usb usb2: Manufacturer: Linux 5.10.76 xhci-hcd
  190. [ 1.469288] usb usb2: SerialNumber: 0000:01:00.0
  191. [ 1.469829] hub 2-0:1.0: USB hub found
  192. [ 1.469886] hub 2-0:1.0: 4 ports detected
  193. [ 1.471292] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  194. [ 1.471532] dwc_otg: FIQ enabled
  195. [ 1.471541] dwc_otg: NAK holdoff enabled
  196. [ 1.471549] dwc_otg: FIQ split-transaction FSM enabled
  197. [ 1.471561] Module dwc_common_port init
  198. [ 1.471969] usbcore: registered new interface driver uas
  199. [ 1.472053] usbcore: registered new interface driver usb-storage
  200. [ 1.472222] mousedev: PS/2 mouse device common for all mice
  201. [ 1.472545] i2c /dev entries driver
  202. [ 1.473441] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
  203. [ 1.473931] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
  204. [ 1.476308] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  205. [ 1.478747] sdhci: Secure Digital Host Controller Interface driver
  206. [ 1.478758] sdhci: Copyright(c) Pierre Ossman
  207. [ 1.479338] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  208. [ 1.479940] sdhci-pltfm: SDHCI platform and OF driver helper
  209. [ 1.484426] ledtrig-cpu: registered to indicate activity on CPUs
  210. [ 1.484549] hid: raw HID events driver (C) Jiri Kosina
  211. [ 1.485479] usbcore: registered new interface driver usbhid
  212. [ 1.485483] usbhid: USB HID core driver
  213. [ 1.488945] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  214. [ 1.488957] [vc_sm_connected_init]: start
  215. [ 1.496355] [vc_sm_connected_init]: installed successfully
  216. [ 1.497396] NET: Registered protocol family 10
  217. [ 1.498131] Segment Routing with IPv6
  218. [ 1.498181] NET: Registered protocol family 17
  219. [ 1.498259] Key type dns_resolver registered
  220. [ 1.498482] Loading compiled-in X.509 certificates
  221. [ 1.503691] uart-pl011 fe201000.serial: there is not valid maps for state default
  222. [ 1.503848] uart-pl011 fe201000.serial: cts_event_workaround enabled
  223. [ 1.503909] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 23, base_baud = 0) is a PL011 rev2
  224. [ 1.512468] vc4-drm gpu: bound fe400000.hvs (ops 0xffffffc010d21850)
  225. [ 1.517958] vc4-drm gpu: bound fef00700.hdmi (ops 0xffffffc010d1f7d8)
  226. [ 1.519782] vc4-drm gpu: bound fef05700.hdmi (ops 0xffffffc010d1f7d8)
  227. [ 1.519916] vc4-drm gpu: bound fe004000.txp (ops 0xffffffc010d21f98)
  228. [ 1.520014] vc4-drm gpu: bound fe206000.pixelvalve (ops 0xffffffc010d1d020)
  229. [ 1.520112] vc4-drm gpu: bound fe207000.pixelvalve (ops 0xffffffc010d1d020)
  230. [ 1.520210] vc4-drm gpu: bound fe20a000.pixelvalve (ops 0xffffffc010d1d020)
  231. [ 1.520283] vc4-drm gpu: bound fe216000.pixelvalve (ops 0xffffffc010d1d020)
  232. [ 1.520375] vc4-drm gpu: bound fec12000.pixelvalve (ops 0xffffffc010d1d020)
  233. [ 1.521611] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
  234. [ 1.603501] Console: switching to colour frame buffer device 240x67
  235. [ 1.634142] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
  236. [ 1.637437] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  237. [ 1.637935] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  238. [ 1.637941] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  239. [ 1.673431] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
  240. [ 1.678825] printk: console [netcon0] enabled
  241. [ 1.678834] netconsole: network logging started
  242. [ 1.678845] of_cfs_init
  243. [ 1.678867] of_cfs_init: OK
  244. [ 1.679969] ALSA device list:
  245. [ 1.679975] #0: vc4-hdmi-0
  246. [ 1.679980] #1: vc4-hdmi-1
  247. [ 1.687726] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  248. [ 1.689288] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  249. [ 1.690853] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  250. [ 1.693655] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  251. [ 1.695217] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  252. [ 1.703675] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
  253. [ 1.716603] Freeing unused kernel memory: 8320K
  254. [ 1.716733] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  255. [ 1.717056] Run /init as init process
  256. [ 1.717066] with arguments:
  257. [ 1.717074] /init
  258. [ 1.717081] with environment:
  259. [ 1.717089] HOME=/
  260. [ 1.717096] TERM=linux
  261. [ 1.717104] boot=UUID=3010-5350
  262. [ 1.717111] disk=UUID=a8e8a687-3b0f-472c-a2e4-3e8c903fd088
  263. [ 1.721937] random: fast init done
  264. [ 1.761965] Checking disk(s): UUID=3010-5350 UUID=a8e8a687-3b0f-472c-a2e4-3e8c903fd088
  265. [ 1.765397] mmc1: new high speed SDIO card at address 0001
  266. [ 1.805229] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
  267. [ 1.805791] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
  268. [ 1.808612] mmcblk0: p1 p2
  269. [ 1.858953] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  270. [ 1.858972] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  271. [ 1.858983] usb 1-1: Product: USB2.0 Hub
  272. [ 1.861169] hub 1-1:1.0: USB hub found
  273. [ 1.861483] hub 1-1:1.0: 4 ports detected
  274. [ 2.149622] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
  275. [ 2.318403] usb 1-1.3: New USB device found, idVendor=12ba, idProduct=0035, bcdDevice= 1.00
  276. [ 2.318414] usb 1-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0
  277. [ 2.318419] usb 1-1.3: Product: Wireless Stereo Headset
  278. [ 2.318424] usb 1-1.3: Manufacturer: Sony Interactive Entertainment
  279. [ 2.385116] input: Sony Interactive Entertainment Wireless Stereo Headset Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:12BA:0035.0001/input/input0
  280. [ 2.443168] input: Sony Interactive Entertainment Wireless Stereo Headset as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:12BA:0035.0001/input/input1
  281. [ 2.443316] input: Sony Interactive Entertainment Wireless Stereo Headset as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.3/0003:12BA:0035.0001/input/input2
  282. [ 2.443592] hid-generic 0003:12BA:0035.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Sony Interactive Entertainment Wireless Stereo Headset] on usb-0000:01:00.0-1.3/input3
  283. [ 2.508960] fsck: CP437: Invalid argument
  284. [ 2.509152] fsck: fsck.fat 4.1 (2017-01-24)
  285. [ 2.509430] fsck: /dev/mmcblk0p1: 263 files, 18155/65501 clusters
  286. [ 2.509846] fsck: STORAGE: clean, 10862/3758080 files, 1436759/15029760 blocks
  287. [ 2.785063] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  288. [ 3.089465] kernel-overlays-setup: setup base modules
  289. [ 3.135837] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.10.76
  290. [ 3.164677] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  291. [ 3.169114] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  292. [ 3.170915] kernel-overlays-setup: done
  293. [ 3.475905] systemd[1]: System time before build time, advancing clock.
  294. [ 3.564858] systemd[1]: systemd 247.3 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  295. [ 3.565256] systemd[1]: Detected architecture arm64.
  296. [ 3.604745] systemd[1]: Set hostname to <LibreELEC>.
  297. [ 3.766753] systemd[1]: Queued start job for default target Kodi Mediacenter Interface.
  298. [ 3.767277] random: systemd: uninitialized urandom read (16 bytes read)
  299. [ 3.783436] systemd[1]: Created slice system-modprobe.slice.
  300. [ 3.783607] random: systemd: uninitialized urandom read (16 bytes read)
  301. [ 3.783985] systemd[1]: Created slice User and Session Slice.
  302. [ 3.784054] random: systemd: uninitialized urandom read (16 bytes read)
  303. [ 3.784194] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  304. [ 3.784360] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  305. [ 3.784565] systemd[1]: Reached target Paths.
  306. [ 3.784649] systemd[1]: Reached target Slices.
  307. [ 3.791900] systemd[1]: Listening on RPCbind Server Activation Socket.
  308. [ 3.792048] systemd[1]: Reached target RPC Port Mapper.
  309. [ 3.792293] systemd[1]: Listening on initctl Compatibility Named Pipe.
  310. [ 3.795371] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  311. [ 3.796384] systemd[1]: Listening on Journal Socket (/dev/log).
  312. [ 3.796902] systemd[1]: Listening on Journal Socket.
  313. [ 3.798354] systemd[1]: Listening on udev Control Socket.
  314. [ 3.798758] systemd[1]: Listening on udev Kernel Socket.
  315. [ 3.799172] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  316. [ 3.801225] systemd[1]: Mounting POSIX Message Queue File System...
  317. [ 3.803888] systemd[1]: Mounting Kernel Debug File System...
  318. [ 3.806128] systemd[1]: Mounting Kernel Trace File System...
  319. [ 3.808413] systemd[1]: Mounting Variable Directory...
  320. [ 3.811095] systemd[1]: Starting Create list of static device nodes for the current kernel...
  321. [ 3.813307] systemd[1]: Starting Load Kernel Module configfs...
  322. [ 3.815826] systemd[1]: Starting Load Kernel Module drm...
  323. [ 3.818456] systemd[1]: Starting Load Kernel Module fuse...
  324. [ 3.820445] systemd[1]: Starting Show Version...
  325. [ 3.822413] systemd[1]: Starting Create Persistent Log Directory on /storage and rotate large logs...
  326. [ 3.824445] systemd[1]: Starting Mounting swapfile...
  327. [ 3.857469] fuse: init (API version 7.32)
  328. [ 3.857823] systemd[1]: Starting Load Kernel Modules...
  329. [ 3.860385] systemd[1]: Starting Setup NTP servers for timesyncd...
  330. [ 3.862789] systemd[1]: Starting Coldplug All udev Devices...
  331. [ 3.864966] systemd[1]: Starting Wait for Kernel Time Synchronisation...
  332. [ 3.871058] systemd[1]: Mounted POSIX Message Queue File System.
  333. [ 3.871416] systemd[1]: Mounted Kernel Debug File System.
  334. [ 3.871696] systemd[1]: Mounted Kernel Trace File System.
  335. [ 3.871922] systemd[1]: Mounted Variable Directory.
  336. [ 3.872738] systemd[1]: Finished Create list of static device nodes for the current kernel.
  337. [ 3.873361] systemd[1]: modprobe@configfs.service: Succeeded.
  338. [ 3.873828] systemd[1]: Finished Load Kernel Module configfs.
  339. [ 3.874397] systemd[1]: modprobe@drm.service: Succeeded.
  340. [ 3.874896] systemd[1]: Finished Load Kernel Module drm.
  341. [ 3.875455] systemd[1]: modprobe@fuse.service: Succeeded.
  342. [ 3.875903] systemd[1]: Finished Load Kernel Module fuse.
  343. [ 3.876755] systemd[1]: Finished Show Version.
  344. [ 3.881400] systemd[1]: Mounting FUSE Control File System...
  345. [ 3.883866] systemd[1]: Mounting Kernel Configuration File System...
  346. [ 3.890010] systemd[1]: Finished Setup NTP servers for timesyncd.
  347. [ 3.898206] systemd[1]: Finished Load Kernel Modules.
  348. [ 3.907372] systemd[1]: Finished Create Persistent Log Directory on /storage and rotate large logs.
  349. [ 3.907899] systemd[1]: Mounted FUSE Control File System.
  350. [ 3.908244] systemd[1]: Mounted Kernel Configuration File System.
  351. [ 3.920536] systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
  352. [ 3.922476] systemd[1]: Starting Apply Kernel Variables...
  353. [ 3.941277] systemd[1]: Finished Apply Kernel Variables.
  354. [ 3.976667] systemd[1]: Finished Mounting swapfile.
  355. [ 3.976969] systemd[1]: Reached target Swap.
  356. [ 3.978807] systemd[1]: Mounting Temporary Directory (/tmp)...
  357. [ 3.983546] systemd[1]: Mounted Temporary Directory (/tmp).
  358. [ 3.983827] systemd[1]: Reached target Local File Systems.
  359. [ 3.985495] systemd[1]: Starting Setup machine-id...
  360. [ 4.028947] systemd[1]: Finished Setup machine-id.
  361. [ 4.032171] systemd[1]: Starting Journal Service...
  362. [ 4.034158] systemd[1]: Starting Create Static Device Nodes in /dev...
  363. [ 4.067194] systemd[1]: Finished Create Static Device Nodes in /dev.
  364. [ 4.089527] systemd[1]: Finished Coldplug All udev Devices.
  365. [ 4.091357] systemd[1]: Started Journal Service.
  366. [ 4.106457] systemd-journald[287]: Received client request to flush runtime journal.
  367. [ 4.591480] random: crng init done
  368. [ 4.591493] random: 7 urandom warning(s) missed due to ratelimiting
  369. [ 5.206770] mc: Linux media interface: v0.10
  370. [ 5.263073] videodev: Linux video capture interface: v2.00
  371. [ 5.269037] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  372. [ 5.339247] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
  373. [ 5.339540] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  374. [ 5.341610] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  375. [ 5.342656] rpivid feb10000.codec: Device registered as /dev/video19
  376. [ 5.364201] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  377. [ 5.383658] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
  378. [ 5.389834] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
  379. [ 5.390135] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
  380. [ 5.390719] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
  381. [ 5.390791] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  382. [ 5.390848] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  383. [ 5.391760] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
  384. [ 5.391780] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
  385. [ 5.391789] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
  386. [ 5.391795] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
  387. [ 5.391801] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
  388. [ 5.391916] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
  389. [ 5.406301] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  390. [ 5.406329] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  391. [ 5.435589] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  392. [ 5.435646] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  393. [ 5.453814] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
  394. [ 5.453854] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
  395. [ 5.456929] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  396. [ 5.528853] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  397. [ 5.564874] brcmfmac: F1 signature read @0x18000000=0x15264345
  398. [ 5.569093] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  399. [ 5.570136] usbcore: registered new interface driver brcmfmac
  400. [ 5.583101] usbcore: registered new interface driver snd-usb-audio
  401. [ 5.870939] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
  402. [ 5.871702] bcmgenet fd580000.ethernet eth0: Link is Down
  403. [ 5.903133] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  404. [ 5.903213] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  405. [ 5.928482] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
  406. [ 6.114426] uart-pl011 fe201000.serial: no DMA platform data
  407. [ 9.919879] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  408. [ 9.919935] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  409. [ 9.955374] 8021q: 802.1Q VLAN Support v1.8
  410. [ 12.375547] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
  411. [ 12.376157] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
  412. [ 12.802337] Bluetooth: Core ver 2.22
  413. [ 12.802414] NET: Registered protocol family 31
  414. [ 12.802418] Bluetooth: HCI device and connection manager initialized
  415. [ 12.802775] Bluetooth: HCI socket layer initialized
  416. [ 12.802783] Bluetooth: L2CAP socket layer initialized
  417. [ 12.802795] Bluetooth: SCO socket layer initialized
  418. [ 12.806932] Bluetooth: HCI UART driver ver 2.3
  419. [ 12.806946] Bluetooth: HCI UART protocol H4 registered
  420. [ 12.807053] Bluetooth: HCI UART protocol Three-wire (H5) registered
  421. [ 12.808813] Bluetooth: HCI UART protocol Broadcom registered
  422.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!