API tools faq
paste
Nick0703

last_kmsg.txt

Nick0703
Jul 16th, 2012
98
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.03 KB | None | 0 0
raw download clone embed print report
  1. 66700000
  2. [ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
  3. [ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000
  4. [ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000
  5. [ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
  6. [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
  7. [ 0.000000] sclk_mdnie: source is mout_mpll (6), rate is 166750000
  8. [ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
  9. [ 0.000000] s5p: 14680064 bytes system memory reserved for mfc at 0x34200000, 0-bank base(0x34200000)
  10. [ 0.000000] s5p: 22020096 bytes system memory reserved for mfc at 0x4eb00000, 1-bank base(0x4eb00000)
  11. [ 0.000000] s5p: 11534336 bytes system memory reserved for fimc0 at 0x4e000000, 1-bank base(0x4e000000)
  12. [ 0.000000] s5p: 11534336 bytes system memory reserved for fimc2 at 0x4d500000, 1-bank base(0x4d500000)
  13. [ 0.000000] s5p: 4190208 bytes system memory reserved for jpeg at 0x34200000, 0-bank base(0x34200000)
  14. [ 0.000000] s5p: 13824000 bytes system memory reserved for fimd at 0x4c7d1000, 1-bank base(0x4c7d1000)
  15. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 99283
  16. [ 0.000000] Kernel command line: console=ttySAC2,115200
  17. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  18. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  19. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  20. [ 0.000000] Memory: 66MB 199MB 127MB = 392MB total
  21. [ 0.000000] Memory: 377764k/449632k available, 24480k reserved, 0K highmem
  22. [ 0.000000] Virtual kernel memory layout:
  23. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  24. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  25. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  26. [ 0.000000] vmalloc : 0xe8000000 - 0xfc000000 ( 320 MB)
  27. [ 0.000000] lowmem : 0xc0000000 - 0xe7f00000 ( 639 MB)
  28. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  29. [ 0.000000] .init : 0xc0008000 - 0xc0839000 (8388 kB)
  30. [ 0.000000] .text : 0xc0839000 - 0xc124f000 (10328 kB)
  31. [ 0.000000] .data : 0xc1250000 - 0xc12a5a40 ( 343 kB)
  32. [ 0.000000] .bss : 0xc12a5a64 - 0xc13cdac0 (1185 kB)
  33. [ 0.000000] NR_IRQS:339
  34. [ 0.000000] VIC @fc000000: id 0x00041192, vendor 0x41
  35. [ 0.000000] VIC @fc010000: id 0x00041192, vendor 0x41
  36. [ 0.000000] VIC @fc020000: id 0x00041192, vendor 0x41
  37. [ 0.000000] VIC @fc030000: id 0x00041192, vendor 0x41
  38. [ 0.000000] mult[140737]
  39. [ 0.000000] max_delta_ns[2937815369]
  40. [ 0.000000] min_delta_ns[30517]
  41. [ 0.000000] rate[32768]
  42. [ 0.000000] HZ[256]
  43. [ 0.000000] Console: colour dummy device 80x30
  44. [ 0.000000] console [ttySAC2] enabled
  45. [ 0.320435] Calibrating delay loop... 799.35 BogoMIPS (lpj=1560576)
  46. [ 0.348825] pid_max: default: 32768 minimum: 301
  47. [ 0.353500] Mount-cache hash table entries: 512
  48. [ 0.358182] Initializing cgroup subsys cpuacct
  49. [ 0.362363] Initializing cgroup subsys freezer
  50. [ 0.366768] Initializing cgroup subsys timer_slack
  51. [ 0.371550] CPU: Testing write buffer coherency: ok
  52. [ 0.378214] print_constraints: dummy:
  53. [ 0.380608] NET: Registered protocol family 16
  54. [ 0.387322] clk_get: could not find clock (null) for dev 0xc1262a78 (fiq_debugger.2)
  55. [ 0.396966] console [ttyFIQ0] enabled
  56. [ 0.399210] Registered FIQ tty driver e7850780
  57. [ 0.405274] ram_console: got buffer at 57f00000, size ff000
  58. [ 0.409445] ram_console: no valid data in buffer (sig = 0x00000000)
  59. [ 0.421602] console [ram-1] enabled
  60. [ 0.423769] S5PC110 Hardware version : EVT1
  61. [ 0.427849] HWREV is 0x1
  62. [ 0.430889] S3C Power Management, Copyright 2004 Simtec Electronics
  63. [ 0.436590] pmstats at 57fff000
  64. [ 0.439730] invalid media device
  65. [ 0.442978] invalid media device
  66. [ 0.446124] Universal :SD Detect configuration
  67. [ 0.451198] S5PV210: Initializing architecture
  68. [ 0.455246] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
  69. [ 0.463398] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
  70. [ 0.471873] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
  71. [ 0.480357] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
  72. [ 0.488948] print_constraints: pd_audio_supply: 5000 mV normal
  73. [ 0.494742] print_constraints: pd_cam_supply: 5000 mV normal
  74. [ 0.500524] print_constraints: pd_tv_supply: 5000 mV normal
  75. [ 0.506081] print_constraints: pd_lcd_supply: 5000 mV normal
  76. [ 0.511864] print_constraints: pd_g3d_supply: 5000 mV normal
  77. [ 0.517519] print_constraints: pd_mfc_supply: 5000 mV normal
  78. [ 0.528142] bio: create slab <bio-0> at 0
  79. [ 0.531297] SCSI subsystem initialized
  80. [ 0.534561] usbcore: registered new interface driver usbfs
  81. [ 0.540075] usbcore: registered new interface driver hub
  82. [ 0.545288] usbcore: registered new device driver usb
  83. [ 0.550585] i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)
  84. [ 0.556594] i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
  85. [ 0.562951] max8998 6-0066: No interrupt base specified, no interrupts
  86. [ 0.570873] i2:10, buck2_idx:0
  87. [ 0.573824] print_constraints: VALIVE_1.2V: 1200 mV
  88. [ 0.578000] print_constraints: VUSB_1.1V: 1100 mV
  89. [ 0.583251] print_constraints: VADC_3.3V: 3000 mV
  90. [ 0.587530] print_constraints: VTF_2.8V: 2800 mV
  91. [ 0.592262] print_constraints: VLCD_1.8V: 1800 mV
  92. [ 0.596961] print_constraints: VUSB_3.3V: 3300 mV
  93. [ 0.602172] print_constraints: VCC_2.8V_PDA: 2800 mV
  94. [ 0.606828] print_constraints: CAM_AF_3.0V: 3000 mV
  95. [ 0.611703] print_constraints: CAM_SENSOR_CORE_1.2V: 1200 mV
  96. [ 0.617490] print_constraints: VGA_VDDIO_2.8V: 2800 mV
  97. [ 0.622619] print_constraints: VGA_DVDD_1.8V: 1800 mV
  98. [ 0.627807] print_constraints: CAM_ISP_HOST_2.8V: 2800 mV
  99. [ 0.633199] print_constraints: VGA_AVDD_2.8V: 2800 mV
  100. [ 0.638371] print_constraints: VCC_3.0V_LCD: 2800 mV
  101. [ 0.643150] print_constraints: VDD_ARM: 750 <--> 1500 mV at 1200 mV
  102. [ 0.649538] print_constraints: VDD_INT: 750 <--> 1500 mV at 1100 mV
  103. [ 0.656928] print_constraints: VCC_1.8V: 1600 mV
  104. [ 0.660637] print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
  105. [ 0.665840] i2c i2c-6: Failed to register i2c client rtc_max8998 at 0x06 (-16)
  106. [ 0.672945] i2c i2c-6: Can't create device at 0x06
  107. [ 0.677646] i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
  108. [ 0.684067] i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL)
  109. [ 0.690242] i2c-gpio i2c-gpio.9: using pins 245 (SDA) and 244 (SCL)
  110. [ 0.696542] i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL)
  111. [ 0.702718] i2c-gpio i2c-gpio.12: using pins 173 (SDA) and 172 (SCL)
  112. [ 0.709113] i2c-gpio i2c-gpio.13: using pins 240 (SDA) and 239 (SCL)
  113. [ 0.715384] i2c-gpio i2c-gpio.10: using pins 197 (SDA) and 198 (SCL)
  114. [ 0.721670] s3c-i2c s3c2440-i2c.0: slave address 0x10
  115. [ 0.726675] s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
  116. [ 0.732562] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  117. [ 0.737961] s3c-i2c s3c2440-i2c.1: slave address 0x10
  118. [ 0.742899] s3c-i2c s3c2440-i2c.1: bus frequency set to 378 KHz
  119. [ 0.748850] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  120. [ 0.754250] s3c-i2c s3c2440-i2c.2: slave address 0x10
  121. [ 0.759190] s3c-i2c s3c2440-i2c.2: bus frequency set to 378 KHz
  122. [ 0.765242] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
  123. [ 0.770634] Advanced Linux Sound Architecture Driver Version 1.0.24.
  124. [ 0.777153] Bluetooth: Core ver 2.16
  125. [ 0.780369] NET: Registered protocol family 31
  126. [ 0.784815] Bluetooth: HCI device and connection manager initialized
  127. [ 0.791079] Bluetooth: HCI socket layer initialized
  128. [ 0.795994] Bluetooth: L2CAP socket layer initialized
  129. [ 0.800965] Bluetooth: SCO socket layer initialized
  130. [ 0.806211] Switching to clocksource clock_source_systimer
  131. [ 0.811300] cfg80211: Calling CRDA to update world regulatory domain
  132. [ 0.820263] Switched to NOHz mode on CPU #0
  133. [ 0.824303] NET: Registered protocol family 2
  134. [ 0.827527] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  135. [ 0.834880] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  136. [ 0.841822] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  137. [ 0.848143] TCP: Hash tables configured (established 16384 bind 16384)
  138. [ 0.854635] TCP reno registered
  139. [ 0.857618] UDP hash table entries: 256 (order: 0, 4096 bytes)
  140. [ 0.863494] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  141. [ 0.869859] NET: Registered protocol family 1
  142. [ 0.910579] PMU: registered new PMU device of type 0
  143. [ 1.071694] wake enabled for irq 165
  144. [ 1.073947] wake disabled for irq 165
  145. [ 1.077929] level device init
  146. [ 1.080551] S5PV210 ADC driver, (c) 2010 Samsung Electronics
  147. [ 1.086283] cpuidle: phy_regs_save:0x56eb1000
  148. [ 1.090614] Loaded driver for PL330 DMAC-0 s3c-pl330
  149. [ 1.095368] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
  150. [ 1.101556] Loaded driver for PL330 DMAC-1 s3c-pl330
  151. [ 1.106368] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  152. [ 1.112561] Loaded driver for PL330 DMAC-2 s3c-pl330
  153. [ 1.117373] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  154. [ 1.131243] ashmem: initialized
  155. [ 1.133486] NTFS driver 2.1.30 [Flags: R/W].
  156. [ 1.137310] ROMFS MTD (C) 2007 Red Hat, Inc.
  157. [ 1.141555] fuse init (API version 7.16)
  158. [ 1.145480] yaffs: yaffs built Jul 15 2012 20:58:21 Installing.
  159. [ 1.151297] msgmni has been set to 737
  160. [ 1.156016] io scheduler noop registered
  161. [ 1.158949] io scheduler deadline registered
  162. [ 1.163268] io scheduler cfq registered (default)
  163. [ 1.167835] io scheduler sio registered
  164. [ 1.171642] io scheduler vr registered
  165. [ 1.175441] io scheduler fiops registered
  166. [ 1.180096] MDNIE INIT ..........
  167. [ 1.182730] S3C MDNIE Driver, (c) 2010 Samsung Electronics
  168. [ 1.188258] MDNIE INIT SUCCESS Addr : 0xe8016000
  169. [ 1.192866] IELCD INIT ..........
  170. [ 1.196233] S3C IELCD Driver, (c) 2010 Samsung Electronics
  171. [ 1.201774] IELCD INIT SUCCESS Addr : 0xe8030000
  172. [ 1.206822] s3cfb s3cfb: [fb2] dma: 0x4cc36000, cpu: 0xe9000000, size: 0x008ca000
  173. [ 1.224136] FIMD src sclk = 166750000
  174. [ 1.226403] s3cfb s3cfb: pixclock adjusted from 41807 to 41979
  175. [ 1.232306] [mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)
  176. [ 1.238534] [mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)
  177. [ 1.244924] [mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)
  178. [ 1.251421] [mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)
  179. [ 1.257767] [mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x10)
  180. [ 1.264244] [mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)
  181. [ 1.270506] [mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)
  182. [ 1.277071] [mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(6), current_mDNIe_OutDoor_OnOff(0)
  183. [ 1.285252] s3cfb s3cfb: registered successfully
  184. [ 1.290076] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
  185. [ 1.298117] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
  186. [ 1.306198] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
  187. [ 1.313879] PA FB = 0x4CC36000, bits per pixel = 32
  188. [ 1.314063] screen width=480 height=800 va=0xdcc36000 pa=0x4cc36000
  189. [ 1.314189] xres_virtual = 480, yres_virtual = 4800, xoffset = 0, yoffset = 0
  190. [ 1.314386] fb_size=9216000
  191. [ 1.314486] Back frameBuffer[0].VAddr=dcdad000 PAddr=4cdad000 size=1536000
  192. [ 1.314681] Back frameBuffer[1].VAddr=dcf24000 PAddr=4cf24000 size=1536000
  193. [ 1.314819] Video Y Buffer[0].VAddr=dd09b000 PAddr=4d09b000 size=921600
  194. [ 1.315011] Video Y Buffer[1].VAddr=dd17c000 PAddr=4d17c000 size=921600
  195. [ 1.315140] Video Y Buffer[2].VAddr=dd25d000 PAddr=4d25d000 size=921600
  196. [ 1.315333] Video UV Buffer[0].VAddr=dd33e000 PAddr=4d33e000 size=462848
  197. [ 1.315525] Video UV Buffer[1].VAddr=dd3af000 PAddr=4d3af000 size=462848
  198. [ 1.315654] Video UV Buffer[2].VAddr=dd420000 PAddr=4d420000 size=462848
  199. [ 1.319158] brd: module loaded
  200. [ 1.320903] loop: module loaded
  201. [ 1.321030] Android kernel panic handler initialized (bind=kpanic)
  202. [ 1.321218] Loading pn544 driver
  203. [ 1.321397] sec_jack_probe : Registering jack driver
  204. [ 1.321880] wake enabled for irq 38
  205. [ 1.321986] sec_jack_init_jack_state
  206. [ 1.322091] sec_jack_set_micbias_state: HWREV=1, on=1
  207. [ 1.322346] handle_jack_not_inserted
  208. [ 1.322448] sec_jack_set_micbias_state: HWREV=1, on=0
  209. [ 1.322564] sec_jack_set_micbias_state: HWREV=1, on=0
  210. [ 1.323971] sec_jack_detect_irq_thread
  211. [ 1.324079] sec_jack_set_micbias_state: HWREV=1, on=1
  212. [ 1.324334] handle_jack_not_inserted
  213. [ 1.324438] sec_jack_set_micbias_state: HWREV=1, on=0
  214. [ 1.324555] sec_jack_set_micbias_state: HWREV=1, on=0
  215. [ 1.324809] wake enabled for irq 167
  216. [ 1.325279] fsa9480 7-0025: dev1: 0x0, dev2: 0x0
  217. [ 1.325492] i2c-core: driver [fsa9480] using legacy resume method
  218. [ 1.325640] [modemctl_init]
  219. [ 1.325777] [modemctl_probe]
  220. [ 1.326056] modemctl xmm: PHONE ACTIVE: 0
  221. [ 1.326195] wake enabled for irq 47
  222. [ 1.326326] wake enabled for irq 171
  223. [ 1.326520] [onedram_init]
  224. [ 1.326646] [onedram_probe]
  225. [ 1.327113] wake enabled for irq 43
  226. [ 1.327330] [svnet_init]
  227. [ 1.328112] deepidle_init misc_register(deepidle)
  228. [ 1.328310] customvoltage_init misc_register(customvoltage)
  229. [ 1.328499] liveoc_init misc_register(liveoc)
  230. [ 1.328730] devil_tweaks_init misc_register(devil_tweaks)
  231. [ 1.328903] bln_control_init misc_register(backlightnotification)
  232. [ 1.329163] touchwake_control_init misc_register(touchwake)
  233. [ 1.329341] blx_init misc_register(batterylifeextender)
  234. [ 1.329601] fsynccontrol_init misc_register(fsynccontrol)
  235. [ 1.330220] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
  236. [ 1.330401] OneNAND version = 0x0241
  237. [ 1.330505] Chip support all block unlock
  238. [ 1.330610] Chip has 4KiB pagesize
  239. [ 1.330775] Chip has cache program feature
  240. [ 1.330899] Scanning device for bad blocks
  241. [ 1.332445] modemctl xmm: PHONE ACTIVE: 0
  242. [ 2.372319] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x4e2 addr8 0x0
  243. [ 2.372471] OneNAND eraseblock 1250 is an initial bad block
  244. [ 2.543562] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x5b0 addr8 0x0
  245. [ 2.543768] OneNAND eraseblock 1456 is an initial bad block
  246. [ 3.035767] OneNAND eraseblock 2047 is an initial bad block
  247. [ 3.035954] Creating 8 MTD partitions on "(null)":
  248. [ 3.036074] 0x000001200000-0x000001980000 : "boot"
  249. [ 3.036763] 0x000001980000-0x000002100000 : "recovery"
  250. [ 3.037429] 0x000002100000-0x000011b00000 : "system"
  251. [ 3.038395] 0x000011b00000-0x000012c80000 : "cache"
  252. [ 3.039076] 0x00001d880000-0x00001e500000 : "efs"
  253. [ 3.039693] 0x00001e500000-0x00001f500000 : "radio"
  254. [ 3.040356] 0x000012c80000-0x00001d880000 : "datadata"
  255. [ 3.041183] 0x00001f500000-0x000020000000 : "reservoir"
  256. [ 3.134225] tl2796: c0, b-715bdf33, got v 2026713, factory wants 2065000
  257. [ 3.134361] tl2796: c1, b-90aa8f09, got v 1975170, factory wants 1967000
  258. [ 3.134556] tl2796: c2, b-9bdca3af, got v 1576357, factory wants 1554000
  259. [ 3.278825] tl2796_probe successfully proved
  260. [ 3.279047] PPP generic driver version 2.4.2
  261. [ 3.279249] PPP Deflate Compression module registered
  262. [ 3.279429] PPP BSD Compression module registered
  263. [ 3.280042] PPP MPPE Compression module registered
  264. [ 3.280161] NET: Registered protocol family 24
  265. [ 3.281446] tun: Universal TUN/TAP device driver, 1.6
  266. [ 3.281565] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  267. [ 3.281884] usbcore: registered new interface driver cdc_acm
  268. [ 3.282006] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  269. [ 3.282207] Initializing USB Mass Storage driver...
  270. [ 3.282366] usbcore: registered new interface driver usb-storage
  271. [ 3.282615] USB Mass Storage support registered.
  272. [ 3.282834] usbcore: registered new interface driver usbserial
  273. [ 3.283052] USB Serial support registered for generic
  274. [ 3.283208] usbcore: registered new interface driver usbserial_generic
  275. [ 3.283472] usbserial: USB Serial Driver core
  276. [ 3.283613] USB Serial support registered for FTDI USB Serial Device
  277. [ 3.283844] usbcore: registered new interface driver ftdi_sio
  278. [ 3.283964] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  279. [ 3.284301] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
  280. [ 3.284308] s3c-udc : version 15 March 2009 (DMA Mode)
  281. [ 3.285574] android_usb gadget: Mass Storage Function, version: 2009/09/11
  282. [ 3.285772] android_usb gadget: Number of LUNs=2
  283. [ 3.285887] lun0: LUN: removable file: (no medium)
  284. [ 3.286002] lun1: LUN: removable file: (no medium)
  285. [ 3.286308] android_usb gadget: android_usb ready
  286. [ 3.304076] Registered gadget driver 'android_usb'
  287. [ 3.304387] mousedev: PS/2 mouse device common for all mice
  288. [ 3.304563] usbcore: registered new interface driver xpad
  289. [ 3.304783] usbcore: registered new interface driver usb_acecad
  290. [ 3.304904] acecad: v3.2:USB Acecad Flair tablet driver
  291. [ 3.305122] usbcore: registered new interface driver aiptek
  292. [ 3.305241] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
  293. [ 3.305442] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
  294. [ 3.305672] usbcore: registered new interface driver gtco
  295. [ 3.305790] GTCO usb driver version: 2.00.0006
  296. [ 3.305942] usbcore: registered new interface driver hanwang
  297. [ 3.306256] usbcore: registered new interface driver kbtab
  298. [ 3.306375] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
  299. [ 3.306594] usbcore: registered new interface driver wacom
  300. [ 3.306712] wacom: v1.52:USB Wacom tablet driver
  301. [ 3.307055] input: mxt224_ts_input as /devices/virtual/input/input0
  302. [ 3.347872] Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0x16, build = 171
  303. [ 3.427584] bma023 5-0038: bma023 found
  304. [ 3.428189] bma023 5-0038: al_version=2, ml_version=1
  305. [ 3.451582] input: accelerometer_sensor as /devices/virtual/input/input1
  306. [ 3.452029] input: magnetic_sensor as /devices/virtual/input/input2
  307. [ 3.452433] input: raw_magnetic_sensor as /devices/virtual/input/input3
  308. [ 3.458998] yas529 12-002e: [init] 0 DeviceID is 6 40
  309. [ 3.472679] i2c-core: driver [yas529] using legacy suspend method
  310. [ 3.472868] i2c-core: driver [yas529] using legacy resume method
  311. [ 3.473275] gp2a: proximity val = 1
  312. [ 3.473380] proximity 0
  313. [ 3.473674] input: proximity as /devices/virtual/input/input4
  314. [ 3.474082] input: lightsensor-level as /devices/virtual/input/input5
  315. [ 3.474662] input: orientation_sensor as /devices/virtual/input/input6
  316. [ 3.474925] powerkey device set
  317. [ 3.475140] wake enabled for irq 166
  318. [ 3.475263] wake enabled for irq 169
  319. [ 3.475385] wake enabled for irq 170
  320. [ 3.475490] GPIO Input Driver: Start gpio inputs for aries-keypad in interrupt mode
  321. [ 3.475846] input: aries-keypad as /devices/virtual/input/input7
  322. [ 3.476368] max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc
  323. [ 3.476512] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  324. [ 3.477417] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  325. [ 3.477555] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  326. [ 3.477742] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  327. [ 3.477889] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  328. [ 3.478307] using rtc device, s3c, for alarms
  329. [ 3.478441] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
  330. [ 3.478748] i2c /dev entries driver
  331. [ 3.479713] lirc_dev: IR Remote Control driver registered, major 249
  332. [ 3.479843] IR NEC protocol handler initialized
  333. [ 3.480018] IR RC5(x) protocol handler initialized
  334. [ 3.480130] IR RC6 protocol handler initialized
  335. [ 3.480305] IR JVC protocol handler initialized
  336. [ 3.480416] IR Sony protocol handler initialized
  337. [ 3.480527] IR RC5 (streamzap) protocol handler initialized
  338. [ 3.480709] IR LIRC bridge handler initialized
  339. [ 3.480891] Linux video capture interface: v2.00
  340. [ 3.481157] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
  341. [ 3.481163]
  342. [ 3.481662] S3C JPEG Driver, (c) 2007 Samsung Electronics
  343. [ 3.481901] JPEG driver for S5PV210
  344. [ 3.482260] i2c-core: driver [s5p_ddc] using legacy suspend method
  345. [ 3.482449] i2c-core: driver [s5p_ddc] using legacy resume method
  346. [ 3.484122] max17040 9-0036: MAX17040 Fuel-Gauge Ver 03
  347. [ 3.484655] device-mapper: uevent: version 1.0.3
  348. [ 3.484865] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  349. [ 3.485089] Bluetooth: HCI UART driver ver 2.2
  350. [ 3.485202] Bluetooth: HCI H4 protocol initialized
  351. [ 3.486731] cpuidle: using governor ladder
  352. [ 3.486902] cpuidle: using governor menu
  353. [ 3.487042] sdhci: Secure Digital Host Controller Interface driver
  354. [ 3.487229] sdhci: Copyright(c) Pierre Ossman
  355. [ 3.487442] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
  356. [ 3.487647] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
  357. [ 3.488754] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
  358. [ 3.488926] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
  359. [ 3.489128] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
  360. [ 3.489385] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
  361. [ 3.489673] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
  362. [ 3.489877] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
  363. [ 3.490120] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  364. [ 3.492142] usbcore: registered new interface driver usbhid
  365. [ 3.492263] usbhid: USB HID core driver
  366. [ 3.492708] logger: created 256K log 'log_main'
  367. [ 3.492891] logger: created 256K log 'log_events'
  368. [ 3.493060] logger: created 256K log 'log_radio'
  369. [ 3.493293] logger: created 256K log 'log_system'
  370. [ 3.493482] zram: num_devices not specified. Using default: 1
  371. [ 3.493704] zram: Creating 1 devices ...
  372. [ 3.494261] zcache: using lzo compressor
  373. [ 3.494477] zcache: cleancache enabled using kernel transcendent memory and compression buddies
  374. [ 3.494623] zcache: frontswap enabled using kernel transcendent memory and xvmalloc
  375. [ 3.495604] WM8994 Audio Codec 0.1
  376. [ 3.509914] wm8994_extensions: initializing driver v10
  377. [ 3.517095] s3c_idma_preallocate_buffer: VA-e80c0000 PA-C0000000 163840bytes
  378. [ 3.517516] asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
  379. [ 3.518021] ALSA device list:
  380. [ 3.518122] #0: smdkc110
  381. [ 3.518260] GACT probability NOT on
  382. [ 3.519473] Mirror/redirect action on
  383. [ 3.519581] u32 classifier
  384. [ 3.519677] Actions configured
  385. [ 3.521836] Netfilter messages via NETLINK v0.30.
  386. [ 3.522001] nf_conntrack version 0.5.0 (5902 buckets, 23608 max)
  387. [ 3.522704] ctnetlink v0.93: registering with nfnetlink.
  388. [ 3.522927] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  389. [ 3.523146] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  390. [ 3.523435] xt_time: kernel timezone is -0000
  391. [ 3.524882] ip_tables: (C) 2000-2006 Netfilter Core Team
  392. [ 3.525227] arp_tables: (C) 2002 David S. Miller
  393. [ 3.525384] TCP cubic registered
  394. [ 3.525647] NET: Registered protocol family 10
  395. [ 3.533052] Mobile IPv6
  396. [ 3.533175] ip6_tables: (C) 2000-2006 Netfilter Core Team
  397. [ 3.533558] IPv6 over IPv4 tunneling driver
  398. [ 3.537548] NET: Registered protocol family 17
  399. [ 3.537680] NET: Registered protocol family 15
  400. [ 3.537957] Bluetooth: RFCOMM TTY layer initialized
  401. [ 3.538080] Bluetooth: RFCOMM socket layer initialized
  402. [ 3.538261] Bluetooth: RFCOMM ver 1.11
  403. [ 3.538366] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  404. [ 3.538484] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  405. [ 3.538774] NET: Registered protocol family 35
  406. [ 3.538950] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
  407. [ 3.539298] ThumbEE CPU extension supported.
  408. [ 3.539787] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
  409. [ 4.023939] mmc0: new high speed MMC card at address 0001
  410. [ 4.028777] mmcblk0: mmc0:0001 MAG8DE 14.9 GiB
  411. [ 4.030127] mmcblk0: p1 p2
  412. [ 4.532294] mmc2: new SDHC card at address b368
  413. [ 4.536580] mmcblk1: mmc2:b368 SD 30.9 GiB
  414. [ 4.538843] mmcblk1: p1 p2
  415. [ 4.707391] UKSM: relative memcmp_cost = 2037 hash=3400141029 cmp_ret=0.
  416. [ 4.715830] regulator_init_complete: pd_mfc_supply: disabling
  417. [ 4.715944] regulator_init_complete: pd_tv_supply: disabling
  418. [ 4.716104] regulator_init_complete: pd_cam_supply: disabling
  419. [ 4.716411] ## wifi_probe
  420. [ 4.716497] wifi_set_power = 1
  421. [ 4.803674] wifi_set_carddetect = 1
  422. [ 4.804007]
  423. [ 4.804013] Dongle Host Driver, version 5.90.125.94.1
  424. [ 4.804021] Compiled in drivers/net/wireless/bcmdhd on Jul 15 2012 at 20:59:46
  425. [ 5.065727] mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
  426. [ 5.076817] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  427. [ 5.113288] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  428. [ 5.123339] mmc1: new SDIO card at address 0001
  429. [ 5.127432] F1 signature read @0x18000000=0x9934329
  430. [ 5.135949] DHD: dongle ram size is set to 294912(orig 294912)
  431. [ 5.140373] wl_create_event_handler thr:45 started
  432. [ 5.142449] dhd_attach thr:46 started
  433. [ 5.143838] dhd_attach thr:47 started
  434. [ 5.144720] dhd_attach thr:48 started
  435. [ 5.145858] wifi_get_mac_addr
  436. [ 5.158071] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  437. [ 5.158209] wifi_set_power = 0
  438. [ 5.158350] =========== WLAN placed in RESET ========
  439. [ 5.158616] input: cypress-touchkey as /devices/virtual/input/input8
  440. [ 5.158980] bcmsdh_sdmmc: probe of mmc1:0001:3 failed with error -110
  441. [ 5.190763] cypress_touchkey_driver 10-0020: cypress_touchkey_probe: hardware rev1 = 0x89, rev2 = 0xe6
  442. [ 5.220858] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  443. [ 5.221205] s3c-rtc s3c2410-rtc: setting system clock to 2012-07-16 18:45:24 UTC (1342464324)
  444. [ 5.222987] FIMC0 registered successfully
  445. [ 5.224741] FIMC1 registered successfully
  446. [ 5.226278] FIMC2 registered successfully
  447. [ 5.226539] S5P TVOUT Driver, (c) 2010 Samsung Electronics
  448. [ 5.227398] clk_get: could not find clock mout_vpll_src for dev 0xc1264378 (s5p-tvout)
  449. [ 5.227732] failed to find clock "mout_vpll_src"
  450. [ 5.228102] s5p-tvout s5p-tvout: hpd status: cable removed/not connected
  451. [ 5.228836] s5p_tv_probe TV Probing is done
  452. [ 5.229145] max8998_charger_probe : MAX8998 Charger Driver Loading
  453. [ 5.231387] max8998_charger_probe : pmic interrupt registered
  454. [ 5.232703] check_lpm_charging_mode : lpm_charging_mode(0)
  455. [ 5.234892] wake enabled for irq 39
  456. [ 5.237438] Warning: unable to open an initial console.
  457. [ 5.242312] Freeing init memory: 8388K
  458. [ 5.242612] CFS CPU scheduler.
  459. [ 5.276706] yaffs: dev is 32505858 name is "mtdblock2" rw
  460. [ 5.276823] yaffs: passed flags ""
  461. [ 5.276967] yaffs: Attempting MTD mount of 31.2,"mtdblock2"
  462. [ 5.556281] yaffs: yaffs_read_super: is_checkpointed 1
  463. [ 5.557657] yaffs: dev is 32505859 name is "mtdblock3" rw
  464. [ 5.557766] yaffs: passed flags ""
  465. [ 5.557856] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
  466. [ 5.560027] yaffs: yaffs_read_super: is_checkpointed 1
  467. [ 11.881093] zcache: created ephemeral tmem pool, id=0, client=65535
  468. [ 11.883179] EXT4-fs (mmcblk0p2): recovery complete
  469. [ 11.887863] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  470. [ 11.925474] zcache: destroyed pool id=0, cli_id=65535
  471. [ 12.063552] SysRq : Emergency Remount R/O
  472. [ 12.064097] Emergency Remount complete
  473. [ 12.165726] Restarting system.
  474. [ 12.165832]
  475. [ 12.165923] Restarting Linux version 3.0.36-00020-g1c0155f-dirty (dominik@ubuntu) (gcc version 4.7.1 20120514 (prerelease) (crosstool-NG linaro-1.13.1-2012.05-20120523 - Linaro GCC 2012.05) ) #1025 PREEMPT Sun Jul 15 23:39:43 CEST 2012
  476. [ 12.165938]
  477. [ 12.170847] arch_reset: attempting watchdog reset
  478.  
  479. No errors detected
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!