API tools faq
paste
bennr01

Pyra crash log (serial)

bennr01
Nov 9th, 2022
107
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 55.17 KB | Software | 0 0
raw download clone embed print report
  1.  
  2. U-Boot SPL 2016.11-01379-gfd188cb2b6-dirty (Jun 21 2019 - 16:36:20)
  3. OMAP5432-GP ES2.0
  4. ram code 0x0
  5. version code 0xa
  6. Found LC15 V5.3 with 4GB RAM
  7. >>spl:board_init_r()
  8. spl_init()
  9. Trying to boot from MMC2_2
  10. board_mmc_init called (vers = 53)
  11. MLO
  12. hard: gpio7 = eMMC
  13. soft: gpio82 = 0 (mmc1=eMMC)
  14. ctrl: gpio76 = 1 (ctrl=soft)
  15. spl: payload image: U-Boot 2016.11-01379-gfd188cb2b6 load addr: 0x807fffc0 size: 342912
  16. Jumping to U-Boot
  17. loaded - jumping to U-Boot...
  18.  
  19. U-Boot 2016.11-01379-gfd188cb2b6-dirty (Jun 21 2019 - 16:36:20 +0200)
  20.  
  21. LPAE build running in hypervisor mode!
  22. CPU : ARM Cortex-A15 r2p2
  23. SoC : OMAP5432-GP ES2.0
  24. Board: Pyra with Letux Cortex 15
  25. I2C: ready
  26. DRAM: 4 GiB
  27. Reset: peripherals
  28. MMC: ram code 0x0
  29. version code 0xa
  30. Found LC15 V5.3 with 4GB RAM
  31. board_mmc_init called (vers = 53)
  32. U-Boot
  33. soft: gpio82 = 0 (mmc1=eMMC)
  34. OMAP SD/MMC: 0, OMAP SD/MMC: 1, OMAP SD/MMC: 2
  35. *** Warning - bad CRC, using default environment
  36.  
  37. Found Pyra MB V5.3
  38. Device Tree: omap5-letux-cortex15-v5.3+pyra-v5.3.dtb
  39. SCSI: SATA link 0 timeout.
  40. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
  41. flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
  42. scanning bus for devices...
  43. Found 0 device(s).
  44. Net: No ethernet found.
  45. Hit any key to stop autoboot: 3  2  1  0
  46. Card did not respond to voltage select!
  47. switch to partitions #0, OK
  48. mmc1(part 0) is current device
  49. Scanning mmc 1:1...
  50. Found /extlinux/extlinux.conf
  51. Retrieving file: /extlinux/extlinux.conf
  52. 309 bytes read in 2 ms (150.4 KiB/s)
  53. Retrieving file: /extlinux/linux.cfg
  54. 1887 bytes read in 3 ms (614.3 KiB/s)
  55. Retrieving file: /extlinux/user.cfg
  56. 0 bytes read in 3 ms (0 Bytes/s)
  57. Extlinux Boot Menu
  58. 1: Debian GNU/Linux 10 (buster), kernel 5.6.19-daveiii-pyradef-aufs
  59. 2: Debian GNU/Linux 10 (buster), kernel 5.6.19-daveiii-pyradef-aufs (recovery mode)
  60. 3: Debian GNU/Linux 10 (buster), kernel 5.6.19-daveiii-pyradef-aufs (hwtest)
  61. Enter choice: 1: Debian GNU/Linux 10 (buster), kernel 5.6.19-daveiii-pyradef-aufs
  62. Retrieving file: /initrd.img-5.6.19-daveiii-pyradef-aufs
  63. 19306222 bytes read in 993 ms (18.5 MiB/s)
  64. Retrieving file: /vmlinuz-5.6.19-daveiii-pyradef-aufs
  65. 7216800 bytes read in 400 ms (17.2 MiB/s)
  66. append: root=PARTUUID=27811743-02 console=ttyO2,115200n8 console=tty0 vram=12M omapfb.vram=0:8M,1:4M omapfb.rotate_type=0 omapdss.def_disp=lcd rootwait twl4030_charger.allow_usb=1 musb_hdrc.preserve_vbus=1 log_buf_len=8M ignore_loglevel earlyprintk drm_kms_helper.fbdev_rotation=8 drm.force_hw_rotation fastboot
  67. Retrieving file: /dtb/linux-image-5.6.19-daveiii-pyradef-aufs/omap5-letux-cortex15-v5.3+pyra-v5.3.dtb
  68. 96086 bytes read in 27 ms (3.4 MiB/s)
  69. ## Flattened Device Tree blob at 88000000
  70. Booting using the fdt blob at 0x88000000
  71. Loading Ramdisk to 8ed96000, end 8ffff6ee ... OK
  72. Loading Device Tree to 8ed7b000, end 8ed95755 ... OK
  73.  
  74. Starting kernel ...
  75.  
  76. [ 0.000000] Booting Linux on physical CPU 0x0
  77. [ 0.000000] Linux version 5.6.19-daveiii-pyradef-aufs (pyra@debian-buster) (gcc version 8.3.0 (Debian 8.3.0-2)) #3 SMP PREEMPT Mon Dec 14 18:23:52 CET 2020
  78. [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d
  79. [ 0.000000] CPU: div instructions available: patching division code
  80. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  81. [ 0.000000] OF: fdt: Machine model: Pyra-Handheld-V5.3
  82. [ 0.000000] printk: debug: ignoring loglevel setting.
  83. [ 0.000000] printk: debug: ignoring loglevel setting.
  84. [ 0.000000] Memory policy: Data cache writealloc
  85. [ 0.000000] cma: Reserved 64 MiB at 0x00000000fb000000
  86. [ 0.000000] OMAP4: Map 0x00000000afd00000 to (ptrval) for dram barrier
  87. [ 0.000000] On node 0 totalpages: 1043712
  88. [ 0.000000] DMA zone: 2295 pages used for memmap
  89. [ 0.000000] DMA zone: 0 pages reserved
  90. [ 0.000000] DMA zone: 195840 pages, LIFO batch:63
  91. [ 0.000000] HighMem zone: 847872 pages, LIFO batch:63
  92. [ 0.000000] OMAP5432 ES2.0
  93. [ 0.000000] percpu: Embedded 20 pages/cpu s50316 r8192 d23412 u81920
  94. [ 0.000000] pcpu-alloc: s50316 r8192 d23412 u81920 alloc=20*4096
  95. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  96. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1041417
  97. [ 0.000000] Kernel command line: root=PARTUUID=27811743-02 console=ttyO2,115200n8 console=tty0 vram=12M omapfb.vram=0:8M,1:4M omapfb.rotate_type=0 omapdss.def_disp=lcd rootwait twl4030_charger.allow_usb=1 musb_hdrc.preserve_vbus=1 log_buf_len=8M ignore_loglevel earlyprintk drm_kms_helper.fbdev_rotation=8 drm.force_hw_rotation fastboot coherent_pool=1M twl4030_charger.allow_usb=1 fsck.repair=yes rootfstype=f2fs rootwait ignore_loglevel
  98. [ 0.000000] printk: log_buf_len: 8388608 bytes
  99. [ 0.000000] printk: early log buf free: 63724(97%)
  100. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  101. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  102. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  103. [ 0.000000] software IO TLB: mapped [mem 0xa53bf000-0xa93bf000] (64MB)
  104. [ 0.000000] Memory: 3948464K/4174848K available (10478K kernel code, 908K rwdata, 2772K rodata, 2048K init, 269K bss, 160848K reserved, 65536K cma-reserved, 3325952K highmem)
  105. [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x34/0x4f8 with crng_init=0
  106. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  107. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  108. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  109. [ 0.000000] Tasks RCU enabled.
  110. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  111. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  112. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  113. [ 0.000000] GIC: Using split EOI/Deactivate mode
  114. [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
  115. [ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys).
  116. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16ac02862, max_idle_ns: 440795202218 ns
  117. [ 0.000010] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511085ns
  118. [ 0.000032] Switching to timer-based delay loop, resolution 162ns
  119. [ 0.000164] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
  120. [ 0.000179] OMAP clocksource: 32k_counter at 32768 Hz
  121. [ 0.002024] Console: colour dummy device 80x30
  122. [ 0.002982] printk: console [tty0] enabled
  123. [ 0.003053] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.28 BogoMIPS (lpj=61440)
  124. [ 0.003104] pid_max: default: 32768 minimum: 301
  125. [ 0.003394] LSM: Security Framework initializing
  126. [ 0.003526] Yama: becoming mindful.
  127. [ 0.003701] AppArmor: AppArmor initialized
  128. [ 0.003742] TOMOYO Linux initialized
  129. [ 0.003863] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  130. [ 0.003910] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  131. [ 0.005181] CPU: Testing write buffer coherency: ok
  132. [ 0.005269] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  133. [ 0.005725] /cpus/cpu@0 missing clock-frequency property
  134. [ 0.005784] /cpus/cpu@1 missing clock-frequency property
  135. [ 0.005819] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  136. [ 0.059707] Setting up static identity map for 0x80200000 - 0x80200060
  137. [ 0.079705] rcu: Hierarchical SRCU implementation.
  138. [ 0.119745] smp: Bringing up secondary CPUs ...
  139. [ 0.200081] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  140. [ 0.200094] CPU1: Spectre v2: using ICIALLU workaround
  141. [ 0.200230] smp: Brought up 1 node, 2 CPUs
  142. [ 0.200241] SMP: Total of 2 processors activated (24.57 BogoMIPS).
  143. [ 0.200261] CPU: All CPU(s) started in HYP mode.
  144. [ 0.200265] CPU: Virtualization extensions available.
  145. [ 0.200711] devtmpfs: initialized
  146. [ 0.215048] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  147. [ 0.215489] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  148. [ 0.215520] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  149. [ 0.216832] pinctrl core: initialized pinctrl subsystem
  150. [ 0.217656] thermal_sys: Registered thermal governor 'fair_share'
  151. [ 0.217656] thermal_sys: Registered thermal governor 'step_wise'
  152. [ 0.217686] thermal_sys: Registered thermal governor 'user_space'
  153. [ 0.218545] NET: Registered protocol family 16
  154. [ 0.221104] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  155. [ 0.222111] omap_hwmod: l3_main_3 using broken dt data from ocp
  156. [ 0.222922] omap_hwmod: l3_main_2 using broken dt data from ocp
  157. [ 0.235997] audit: initializing netlink subsys (disabled)
  158. [ 0.236210] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1
  159. [ 0.239908] cpuidle: using governor menu
  160. [ 0.266188] platform 50000000.gpmc: Cannot lookup hwmod 'gpmc'
  161. [ 0.266381] omap-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
  162. [ 0.266402] omap-gpmc 50000000.gpmc: GPMC revision 6.0
  163. [ 0.275078] No ATAGs?
  164. [ 0.275136] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  165. [ 0.275171] hw-breakpoint: maximum watchpoint size is 8 bytes.
  166. [ 0.296955] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  167. [ 0.303569] vsys_cobra: supplied by vmain
  168. [ 0.307779] iommu: Default domain type: Translated
  169. [ 0.310002] vgaarb: loaded
  170. [ 0.310658] SCSI subsystem initialized
  171. [ 0.311558] libata version 3.00 loaded.
  172. [ 0.312047] usbcore: registered new interface driver usbfs
  173. [ 0.312163] usbcore: registered new interface driver hub
  174. [ 0.312290] usbcore: registered new device driver usb
  175. [ 0.312565] usb_phy_generic hsusb2_phy: hsusb2_phy supply vcc not found, using dummy regulator
  176. [ 0.314366] Advanced Linux Sound Architecture Driver Initialized.
  177. [ 0.315037] NetLabel: Initializing
  178. [ 0.315041] NetLabel: domain hash size = 128
  179. [ 0.315067] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  180. [ 0.315129] NetLabel: unlabeled traffic allowed by default
  181. [ 0.315922] clocksource: Switched to clocksource arch_sys_counter
  182. [ 0.382520] VFS: Disk quotas dquot_6.6.0
  183. [ 0.382598] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  184. [ 0.383215] AppArmor: AppArmor Filesystem Enabled
  185. [ 0.395054] NET: Registered protocol family 2
  186. [ 0.395561] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  187. [ 0.395604] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  188. [ 0.395673] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  189. [ 0.395817] TCP: Hash tables configured (established 8192 bind 8192)
  190. [ 0.395909] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  191. [ 0.395989] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  192. [ 0.396235] NET: Registered protocol family 1
  193. [ 0.396826] PCI: CLS 0 bytes, default 64
  194. [ 0.397282] Trying to unpack rootfs image as initramfs...
  195. [ 1.259526] Freeing initrd memory: 18856K
  196. [ 1.260075] hw perfevents: no interrupt-affinity property for /pmu, guessing.
  197. [ 1.260289] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  198. [ 1.262636] Initialise system trusted keyrings
  199. [ 1.262761] workingset: timestamp_bits=14 max_order=20 bucket_order=6
  200. [ 1.273011] zbud: loaded
  201. [ 1.275883] jitterentropy: Initialization failed with host not compliant with requirements: 2
  202. [ 1.275914] Key type asymmetric registered
  203. [ 1.275951] Asymmetric key parser 'x509' registered
  204. [ 1.276005] bounce: pool size: 64 pages
  205. [ 1.276114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  206. [ 1.276127] io scheduler mq-deadline registered
  207. [ 1.276155] io scheduler kyber registered
  208. [ 1.281845] OMAP GPIO hardware version 0.1
  209. [ 1.306569] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
  210. [ 1.379765] GPIO line 74 (gpio8_234/msecure) hogged as output/high
  211. [ 1.407811] ti-pipe3 4a096000.phy: can't get syscon-pllreset, sata dpll won't idle
  212. [ 1.409367] pinctrl-single 4ae0c840.pinmux: 30 pins, size 60
  213. [ 1.410039] pinctrl-single 4a002840.pinmux: 219 pins, size 438
  214. [ 1.414167] pwm-backlight keyboard-backlight: keyboard-backlight supply power not found, using dummy regulator
  215. [ 1.414464] pwm-backlight backlight: backlight supply power not found, using dummy regulator
  216. [ 1.419506] ti_abb 4ae07cdc.regulator-abb-mpu: can't request region for resource [mem 0x4ae07cdc-0x4ae07ce3]
  217. [ 1.419547] ti_abb: probe of 4ae07cdc.regulator-abb-mpu failed with error -16
  218. [ 1.419607] ti_abb 4ae07ce4.regulator-abb-mm: can't request region for resource [mem 0x4ae07ce4-0x4ae07ceb]
  219. [ 1.419633] ti_abb: probe of 4ae07ce4.regulator-abb-mm failed with error -16
  220. [ 1.420102] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  221. [ 1.422809] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 108, base_baud = 3000000) is a OMAP UART2
  222. [ 2.382286] printk: console [ttyO2] enabled
  223. [ 2.387395] omap_uart 48068000.serial: no wakeirq for uart5
  224. [ 2.393437] 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 121, base_baud = 3000000) is a OMAP UART5
  225. [ 2.403935] omap_uart 4806c000.serial: no wakeirq for uart1
  226. [ 2.410005] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 122, base_baud = 3000000) is a OMAP UART1
  227. [ 2.420079] serial serial0: tty port ttyO1 registered
  228. [ 2.425602] omap_uart 4806e000.serial: no wakeirq for uart3
  229. [ 2.431649] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 123, base_baud = 3000000) is a OMAP UART3
  230. [ 2.443425] omap_rng 48090000.rng: Random Number Generator ver. 20
  231. [ 2.443965] random: fast init done
  232. [ 2.450716] omapdss_dss 58000000.dss: 58000000.dss supply vdda_video not found, using dummy regulator
  233. [ 2.453667] random: crng init done
  234. [ 2.467167] DSS: OMAP DSS rev 6.1
  235. [ 2.484624] brd: module loaded
  236. [ 2.492812] loop: module loaded
  237. [ 2.496190] wwan_on_off_init: wwan_on_off_init
  238. [ 2.501275] wwan_on_off_probe: wwan_on_off_probe()
  239. [ 2.508655] ahci 4a140000.sata: 4a140000.sata supply ahci not found, using dummy regulator
  240. [ 2.517487] ahci 4a140000.sata: 4a140000.sata supply phy not found, using dummy regulator
  241. [ 2.526249] ahci 4a140000.sata: 4a140000.sata supply target not found, using dummy regulator
  242. [ 2.535344] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled
  243. [ 2.542454] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  244. [ 2.551527] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst
  245. [ 2.562413] scsi host0: ahci
  246. [ 2.565900] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 31
  247. [ 2.574833] mtdoops: mtd device (mtddev=name/number) must be supplied
  248. [ 2.583381] libphy: Fixed MDIO Bus: probed
  249. [ 2.591268] omap-dwc3 4a020000.omap_dwc3: vbus init failed
  250. [ 2.597522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  251. [ 2.604436] ehci-pci: EHCI PCI platform driver
  252. [ 2.609227] usbcore: registered new interface driver usb-storage
  253. [ 2.616185] mousedev: PS/2 mouse device common for all mice
  254. [ 2.623592] i2c /dev entries driver
  255. [ 2.627385] IR NEC protocol handler initialized
  256. [ 2.632163] IR RC5(x/sz) protocol handler initialized
  257. [ 2.637517] IR RC6 protocol handler initialized
  258. [ 2.642295] IR JVC protocol handler initialized
  259. [ 2.647099] IR Sony protocol handler initialized
  260. [ 2.651968] IR SANYO protocol handler initialized
  261. [ 2.656956] IR Sharp protocol handler initialized
  262. [ 2.661917] IR MCE Keyboard/mouse protocol handler initialized
  263. [ 2.668095] IR XMP protocol handler initialized
  264. [ 2.672872] Driver for 1-wire Dallas network protocol.
  265. [ 2.682618] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  266. [ 2.692204] sdhci: Secure Digital Host Controller Interface driver
  267. [ 2.698735] sdhci: Copyright(c) Pierre Ossman
  268. [ 2.704273] omap_gpio 48053000.gpio: Could not set line 4 debounce to 200000 microseconds (-22)
  269. [ 2.713475] omap_hsmmc 4809c000.mmc: Got CD GPIO
  270. [ 2.718374] omap_hsmmc 4809c000.mmc: Got WP GPIO
  271. [ 2.762364] omap_gpio 48057000.gpio: Could not set line 13 debounce to 200000 microseconds (-22)
  272. [ 2.771698] omap_hsmmc 480d1000.mmc: Got CD GPIO
  273. [ 2.776707] omap_hsmmc 480d1000.mmc: Got WP GPIO
  274. [ 2.786402] sdhci-pltfm: SDHCI platform and OF driver helper
  275. [ 2.793126] txs02612 txs02612: probe
  276. [ 2.797001] txs02612 txs02612: failed to get mmc phandle in /txs02612 node
  277. [ 2.804270] txs02612 txs02612: could not get access to host port, using manual mode
  278. [ 2.835988] txs02612_request: current=1 client=0
  279. [ 2.865971] txs02612 txs02612: probed
  280. [ 2.869938] txs02612_request: current=0 client=1
  281. [ 2.875249] ledtrig-cpu: registered to indicate activity on CPUs
  282. [ 2.884685] usbcore: registered new interface driver usbhid
  283. [ 2.890629] usbhid: USB HID core driver
  284. [ 2.894993] ashmem: initialized
  285. [ 2.898350] ata1: SATA link down (SStatus 0 SControl 300)
  286. [ 2.906163] oprofile: using timer interrupt.
  287. [ 2.910727] drop_monitor: Initializing network drop monitor service
  288. [ 2.918058] NET: Registered protocol family 10
  289. [ 2.950614] Segment Routing with IPv6
  290. [ 2.954551] mip6: Mobile IPv6
  291. [ 2.957731] NET: Registered protocol family 17
  292. [ 2.962437] mpls_gso: MPLS GSO support
  293. [ 2.966779] ThumbEE CPU extension supported.
  294. [ 2.971316] Registering SWP/SWPB emulation handler
  295. [ 2.976506] omap_vc_init_channel: No PMIC info for vdd_core
  296. [ 2.982384] omap_vp_init: No PMIC info for vdd_core
  297. [ 2.987584] omap_vc_init_channel: No PMIC info for vdd_mm
  298. [ 2.993271] omap_vp_init: No PMIC info for vdd_mm
  299. [ 2.998295] omap_vc_init_channel: No PMIC info for vdd_mpu
  300. [ 3.004080] omap_vp_init: No PMIC info for vdd_mpu
  301. [ 3.009181] Power Management for TI OMAP4+ devices.
  302. [ 3.014927] Loading compiled-in X.509 certificates
  303. [ 3.023951] Loaded X.509 cert 'Build time autogenerated kernel key: 4020818a539cdd7ae890874388bde6caf4fc6257'
  304. [ 3.034950] Key type ._fscrypt registered
  305. [ 3.039232] Key type .fscrypt registered
  306. [ 3.043387] Key type fscrypt-provisioning registered
  307. [ 3.048945] AppArmor: AppArmor sha1 policy hashing enabled
  308. [ 3.075963] dmm 4e000000.dmm: initialized all PAT entries
  309. [ 3.085545] omap-iommu 4a066000.mmu: 4a066000.mmu registered
  310. [ 3.093571] bmc150_accel_i2c 2-0010: mounting matrix not found: using identity...
  311. [ 3.129612] bmc150_accel_i2c 2-0010: Error: Reading chip id
  312. [ 3.135563] bmc150_accel_i2c: probe of 2-0010 failed with error -121
  313. [ 3.142766] bmc150_magn_i2c 2-0012: mounting matrix not found: using identity...
  314. [ 3.150826] bmc150_magn_i2c 2-0012: Failed to bring up device from suspend mode
  315. [ 3.158782] bmc150_magn_i2c: probe of 2-0012 failed with error -121
  316. [ 3.165783] bmp280 2-0077: 2-0077 supply vddd not found, using dummy regulator
  317. [ 3.173497] bmp280 2-0077: 2-0077 supply vdda not found, using dummy regulator
  318. [ 3.192173] bmp280: probe of 2-0077 failed with error -121
  319. [ 3.198369] bmp280 2-0076: 2-0076 supply vddd not found, using dummy regulator
  320. [ 3.206090] bmp280 2-0076: 2-0076 supply vdda not found, using dummy regulator
  321. [ 3.227103] bno055 2-0029: mounting matrix not found: using identity...
  322. [ 3.242619] bno055 2-0029: software revision id 0311
  323. [ 3.250651] input: iio-bridge: bno055 as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48060000.target-module/48060000.i2c/i2c-2/2-0029/iio:device1/input/input0
  324. [ 3.270027] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz
  325. [ 3.277409] palmas 0-0048: Irq flag is 0x00000008
  326. [ 3.312687] palmas 0-0048: Muxing GPIO 3, PWM 0, LED 0
  327. [ 3.330632] palmas-rtc 48070000.i2c:palmas@48:rtc: registered as rtc0
  328. [ 3.343789] SMPS123: supplied by regulator-dummy
  329. [ 3.350775] SMPS45: supplied by regulator-dummy
  330. [ 3.357155] SMPS6: supplied by vsys_cobra
  331. [ 3.362754] SMPS7: supplied by vsys_cobra
  332. [ 3.368779] SMPS8: supplied by vsys_cobra
  333. [ 3.374463] SMPS9: supplied by vsys_cobra
  334. [ 3.379206] smps9: Bringing 0uV into 2100000-2100000uV
  335. [ 3.387475] SMPS10_OUT2: supplied by regulator-dummy
  336. [ 3.395159] SMPS10_OUT1: supplied by regulator-dummy
  337. [ 3.401854] LDO1: supplied by vsys_cobra
  338. [ 3.406609] ldo1: Bringing 0uV into 1800000-1800000uV
  339. [ 3.415318] LDO2: supplied by vsys_cobra
  340. [ 3.423382] ldo4: Bringing 0uV into 1800000-1800000uV
  341. [ 3.431347] LDO5: supplied by vsys_cobra
  342. [ 3.442021] LDO7: supplied by vsys_cobra
  343. [ 3.446354] ldo7: Bringing 0uV into 2000000-2000000uV
  344. [ 3.453835] LDO8: supplied by vsys_cobra
  345. [ 3.460682] LDO9: supplied by vmmcsd_fixed
  346. [ 3.467621] LDOLN: supplied by vsys_cobra
  347. [ 3.474513] LDOUSB: supplied by vsys_cobra
  348. [ 3.484678] palmas_pwrbutton 48070000.i2c:palmas@48:palmas_power_button: h/w controlled shutdown duration=8 seconds
  349. [ 3.498662] input: palmas_pwron as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48070000.target-module/48070000.i2c/i2c-0/0-0048/48070000.i2c:palmas@48:palmas_power_button/input/input1
  350. [ 3.525922] usb3503 0-0008: usb3503_probe
  351. [ 3.535973] usb3503 0-0008: reset gpio state 1
  352. [ 3.540707] usb3503 0-0008: usb3503_connect
  353. [ 3.545129] usb3503 0-0008: usb3503_reset 1
  354. [ 3.556044] usb3503 0-0008: SP_ILOCK failed (-121)
  355. [ 3.561119] usb3503 0-0008: usb3503_probe: probed in hub mode
  356. [ 3.567631] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
  357. [ 3.597020] as5013 1-0040: ID code: 0c
  358. [ 3.601628] as5013 1-0040: ID version: 0d
  359. [ 3.606389] as5013 1-0040: silicon revision: 00
  360. [ 3.611699] as5013 1-0040: control: f1
  361. [ 3.615819] input: nub0 as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48072000.target-module/48072000.i2c/i2c-1/1-0040/input/input2
  362. [ 3.632573] as5013 1-0040: probe 40, gpio -2, irq 0, "as5013"
  363. [ 3.639837] as5013 1-0041: ID code: 0c
  364. [ 3.644207] as5013 1-0041: ID version: 0d
  365. [ 3.648961] as5013 1-0041: silicon revision: 00
  366. [ 3.654393] as5013 1-0041: control: f1
  367. [ 3.658626] input: nub1 as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48072000.target-module/48072000.i2c/i2c-1/1-0041/input/input3
  368. [ 3.675389] as5013 1-0041: probe 41, gpio -2, irq 0, "as5013"
  369. [ 3.684700] input: tca8418 as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48072000.target-module/48072000.i2c/i2c-1/1-0034/input/input4
  370. [ 3.702157] bq27xxx_battery_setup
  371. [ 3.705685] bq27xxx_battery_setup: dm_regs=f5cbe8d4
  372. [ 3.711553] bq27xxx_battery_settings
  373. [ 3.715367] bq27xxx_battery_set_config
  374. [ 3.719334] bq27xxx_battery_unseal
  375. [ 3.733568] bq27xxx_battery_update_dm_block
  376. [ 3.738011] bq27xxx-battery 1-0055: design-capacity has 6000
  377. [ 3.743979] bq27xxx_battery_update_dm_block
  378. [ 3.748417] bq27xxx-battery 1-0055: design-energy has 22200
  379. [ 3.754288] bq27xxx_battery_update_dm_block
  380. [ 3.758741] bq27xxx-battery 1-0055: terminate-voltage has 3200
  381. [ 3.764913] bq27xxx_battery_seal
  382. [ 3.775851] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz
  383. [ 3.807072] input: TSC2007 Touchscreen as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/4807a000.target-module/4807a000.i2c/i2c-3/3-0048/input/input5
  384. [ 3.828438] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz
  385. [ 3.836277] vdds_1v8_main: supplied by smps7
  386. [ 3.841195] pca953x 4-0022: using AI
  387. [ 3.879887] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
  388. [ 3.888157] omap-iommu 55082000.mmu: 55082000.mmu registered
  389. [ 3.896275] pwm-backlight keyboard-backlight: keyboard-backlight supply power not found, using dummy regulator
  390. [ 3.907139] dmtimer posted=0
  391. [ 3.910527] pwm-backlight backlight: backlight supply power not found, using dummy regulator
  392. [ 3.920179] ldo4: supplied by vdds_1v8_main
  393. [ 3.931546] wwan_on_off_probe: wwan_on_off_probe()
  394. [ 3.937596] omap-dwc3 4a020000.omap_dwc3: vbus init failed
  395. [ 3.946934] omap_gpio 48053000.gpio: Could not set line 4 debounce to 200000 microseconds (-22)
  396. [ 3.956151] omap_hsmmc 4809c000.mmc: Got CD GPIO
  397. [ 3.961064] omap_hsmmc 4809c000.mmc: Got WP GPIO
  398. [ 4.001715] omap_hsmmc 480ad000.mmc: allocated mmc-pwrseq
  399. [ 4.123570] omap_gpio 48057000.gpio: Could not set line 13 debounce to 200000 microseconds (-22)
  400. [ 4.132917] omap_hsmmc 480d1000.mmc: Got CD GPIO
  401. [ 4.137878] omap_hsmmc 480d1000.mmc: Got WP GPIO
  402. [ 4.150074] omap_hsmmc 480ad000.mmc: card claims to support voltages below defined range
  403. [ 4.184362] mmc4: new high speed SDIO card at address 0001
  404. [ 4.276463] ldo3: supplied by vdds_1v8_main
  405. [ 4.280971] ldo6: supplied by vdds_1v8_main
  406. [ 4.344822] mmc5: new high speed SDXC card at address 59b4
  407. [ 4.361607] mmcblk5: mmc5:59b4 5MKJR 236 GiB
  408. [ 4.369175] mmcblk5: p1
  409. [ 4.483338] bq2429x_charger 1-006b: bq2429x_parse_dt,line=1539 chg_current = 2048000 usb_input_current = 3000000 adp_input_current = 2048000 bat_volt_max = 4200000
  410. [ 4.498936] bq2429x_charger 1-006b: found regulator-max-microvolt = 4200000
  411. [ 4.526215] omapdss_dss 58000000.dss: bound 58001000.dispc (ops 0xc0ca350c)
  412. [ 4.533669] omapdss_dss 58000000.dss: bound 58004000.encoder (ops 0xc0ca52d4)
  413. [ 4.542117] omap-hdmi-audio omap-hdmi-audio.1.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok
  414. [ 4.552373] omapdss_dss 58000000.dss: bound 58040000.encoder (ops 0xc0ca6160)
  415. [ 4.562012] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  416. [ 4.569083] [drm] No driver support for vblank timestamp query.
  417. [ 4.612192] drm_setup_crtcs_fb: sw_rotations=1
  418. [ 4.616978] drm_setup_crtcs_fb: fbcon_rotate_hint=0
  419. [ 4.630131] ------------[ cut here ]------------
  420. [ 4.630157] WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x254/0x374
  421. [ 4.630162] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4WAKEUP (Idle): Data Access in User mode during Functional access
  422. [ 4.630162] Modules linked in:
  423. [ 4.630162] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.19-daveiii-pyradef-aufs #3
  424. [ 4.630162] Hardware name: Generic OMAP5 (Flattened Device Tree)
  425. [ 4.630191] [<c0212e60>] (unwind_backtrace) from [<c020d1a0>] (show_stack+0x10/0x14)
  426. [ 4.630192] [<c020d1a0>] (show_stack) from [<c0c1b544>] (dump_stack+0x94/0xa8)
  427. [ 4.630195] [<c0c1b544>] (dump_stack) from [<c02351f0>] (__warn+0xd0/0xf8)
  428. [ 4.630212] [<c02351f0>] (__warn) from [<c02355e0>] (warn_slowpath_fmt+0x94/0xb8)
  429. [ 4.630223] [<c02355e0>] (warn_slowpath_fmt) from [<c064c23c>] (l3_interrupt_handler+0x254/0x374)
  430. [ 4.630223] [<c064c23c>] (l3_interrupt_handler) from [<c0290864>] (__handle_irq_event_percpu+0x58/0x29c)
  431. [ 4.630226] [<c0290864>] (__handle_irq_event_percpu) from [<c0290ad4>] (handle_irq_event_percpu+0x2c/0x80)
  432. [ 4.630236] [<c0290ad4>] (handle_irq_event_percpu) from [<c0290b60>] (handle_irq_event+0x38/0x5c)
  433. [ 4.630250] [<c0290b60>] (handle_irq_event) from [<c02950f4>] (handle_fasteoi_irq+0xb8/0x168)
  434. [ 4.630253] [<c02950f4>] (handle_fasteoi_irq) from [<c028fae4>] (generic_handle_irq+0x24/0x34)
  435. [ 4.630253] [<c028fae4>] (generic_handle_irq) from [<c02900b8>] (__handle_domain_irq+0x5c/0xb4)
  436. [ 4.630254] [<c02900b8>] (__handle_domain_irq) from [<c064a570>] (gic_handle_irq+0x3c/0x78)
  437. [ 4.630266] [<c064a570>] (gic_handle_irq) from [<c0201ab8>] (__irq_svc+0x58/0x8c)
  438. [ 4.630272] Exception stack(0xc1201eb8 to 0xc1201f00)
  439. [ 4.630279] 1ea0: 00000000 efc99f80
  440. [ 4.630284] 1ec0: 00000001 c1200000 c120a1c8 c120a158 efc95a78 00000001 00000001 13f9bcef
  441. [ 4.630284] 1ee0: 00000001 00000001 00000000 c1201f08 c02c13c4 c08ff5c4 20000113 ffffffff
  442. [ 4.630284] [<c0201ab8>] (__irq_svc) from [<c08ff5c4>] (cpuidle_enter_state+0x164/0x5b8)
  443. [ 4.630298] [<c08ff5c4>] (cpuidle_enter_state) from [<c08ffa54>] (cpuidle_enter+0x28/0x38)
  444. [ 4.630312] [<c08ffa54>] (cpuidle_enter) from [<c026781c>] (do_idle+0x234/0x29c)
  445. [ 4.630314] [<c026781c>] (do_idle) from [<c0267b78>] (cpu_startup_entry+0x18/0x20)
  446. [ 4.630314] [<c0267b78>] (cpu_startup_entry) from [<c100137c>] (start_kernel+0x7cc/0x810)
  447. [ 4.630325] [<c100137c>] (start_kernel) from [<00000000>] (0x0)
  448. [ 4.630333] ---[ end trace fae10816850e2d5a ]---
  449. [ 4.820958] dmtimer posted=0
  450. [ 4.882603] Console: switching to colour frame buffer device 160x45
  451. [ 5.300816] omapdrm omapdrm.0: fb0: omapdrmdrmfb frame buffer device
  452. [ 5.317235] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0
  453. [ 5.330968] wwan_on_off_probe: wwan_on_off_probe()
  454. [ 5.341883] modem_vbus_hdmi_power: supplied by vsys
  455. [ 5.352666] modem_vbus_power: supplied by modem_vbus_hdmi_power
  456. [ 5.364838] wwan_on_off_probe: onoff = 623ee4cf indicator = cf0a6930 -304231872 usb_phy = -1054427720
  457. [ 5.380314] wwan_on_off_probe: wwan_on_off_probe() wwan=0c1c2baa
  458. [ 5.392369] wwan_on_off_is_powered_on: gpio value = 0
  459. [ 5.403447] wwan_on_off_is_powered_on: return 'false'
  460. [ 5.414738] wwan_on_off_rfkill_set_block: blocked: 1
  461. [ 5.425328] wwan_on_off_set_power:on = 0
  462. [ 5.434819] wwan_on_off_is_powered_on: gpio value = 0
  463. [ 5.445408] wwan_on_off_is_powered_on: return 'false'
  464. [ 5.455937] wwan_on_off_set_power: state 0
  465. [ 5.465153] wwan_on_off_set_power: regulator 0
  466. [ 5.474827] wwan_on_off_set_power: done
  467. [ 5.483829] wwan_on_off_probe: successfully probed
  468. [ 5.494692] otg_path: supplied by otg
  469. [ 5.504185] dwc3 4a030000.dwc3: Failed to get clk 'ref': -2
  470. [ 5.516789] dwc3 4a030000.dwc3: changing max_speed on rev 5533202a
  471. [ 5.530217] input: user-buttons as /devices/platform/user-buttons/input/input6
  472. [ 5.546452] input: pyra-game-buttons as /devices/platform/pyra-game-buttons/input/input7
  473. [ 5.563390] input: pyra-lid-wakeup as /devices/platform/pyra-lid-wakeup/input/input8
  474. [ 5.581456] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2022-11-09T12:14:52 UTC (1667996092)
  475. [ 5.596959] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  476. [ 5.611394] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  477. [ 5.623234] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  478. [ 5.631474] l4sec_cm:clk:0038:0: failed to disable
  479. [ 5.637197] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
  480. [ 5.646799] ALSA device list:
  481. [ 5.667393] #0: HDMI 58040000.encoder
  482. [ 5.677378] Freeing unused kernel memory: 2048K
  483. [ 5.806839] Run /init as init process
  484. [ 5.823629] with arguments:
  485. [ 5.839632] /init
  486. [ 5.854558] earlyprintk
  487. [ 5.869685] fastboot
  488. [ 5.878027] with environment:
  489. [ 5.886414] HOME=/
  490. [ 5.893864] TERM=linux
  491. [ 5.901616] vram=12M
  492. [ 6.004112] set_switch() to 0
  493. [ 6.326268] drm_setup_crtcs_fb: sw_rotations=1
  494. [ 6.334495] drm_setup_crtcs_fb: fbcon_rotate_hint=0
  495. [ 6.548100] ehci-omap: OMAP-EHCI Host Controller driver
  496. [ 6.614854] cfg80211: failed to load regulatory.db
  497. [ 6.665532] etnaviv etnaviv: bound 59000000.bb2d (ops gpu_ops [etnaviv])
  498. [ 6.685978] etnaviv-gpu 59000000.bb2d: model: GC320, revision: 5301
  499. [ 6.708235] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1
  500. [ 6.721766] pvrsrvkm 56000000.gpu: Enabling quirks 00000000
  501. [ 6.732428] [drm] Initialized pvr 1.14.3699939 20110701 for 56000000.gpu on minor 2
  502. [ 6.786107] ehci-omap 4a064c00.ehci: EHCI Host Controller
  503. [ 6.804222] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
  504. [ 6.821751] ehci-omap 4a064c00.ehci: irq 106, io mem 0x4a064c00
  505. [ 6.866246] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
  506. [ 6.896977] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
  507. [ 6.930249] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  508. [ 6.962701] usb usb1: Product: EHCI Host Controller
  509. [ 6.992314] usb usb1: Manufacturer: Linux 5.6.19-daveiii-pyradef-aufs ehci_hcd
  510. [ 7.006187] usb usb1: SerialNumber: 4a064c00.ehci
  511. [ 7.018032] hub 1-0:1.0: USB hub found
  512. [ 7.027734] hub 1-0:1.0: 3 ports detected
  513. [ 7.127286] mmc0: new high speed MMC card at address 0001
  514. [ 7.148558] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB
  515. [ 7.157048] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 4.00 MiB
  516. [ 7.167088] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 4.00 MiB
  517. [ 7.178592] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB, chardev (245:0)
  518. [ 7.192570] mmcblk0: p1 p2
  519. done.
  520.  
  521.  
  522. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  523.  
  524.  
  525. Begin: Running /scripts/local-premount ... done.
  526.  
  527.  
  528. [ 7.416111] usb 1-2: new high-speed USB device number 2 using ehci-omap
  529. [ 7.646644] usb 1-2: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0
  530. [ 7.661656] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  531. [ 7.676200] hub 1-2:1.0: USB hub found
  532. [ 7.687429] hub 1-2:1.0: 3 ports detected
  533. [ 7.741056] process '/usr/bin/fstype' started with executable stack
  534. Warning: Fast boot enabled, so skipping root file system check.
  535.  
  536.  
  537. [ 7.849477] F2FS-fs (mmcblk0p2): recover fsync data on readonly fs
  538. [ 7.906098] F2FS-fs (mmcblk0p2): Mounted with checkpoint version = 4a0a2b5d
  539. done.
  540.  
  541.  
  542. Begin: Running /scripts/local-bottom ... done.
  543.  
  544.  
  545. Begin: Running /scripts/init-bottom ... done.
  546.  
  547.  
  548. [ 8.103947] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
  549. [ 8.435422] systemd[1]: Inserted module 'autofs4'
  550. [ 8.479442] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  551. [ 8.515141] systemd[1]: Detected architecture arm.
  552.  
  553.  
  554.  
  555. Welcome to Debian GNU/Linux 10 (buster)!
  556.  
  557.  
  558.  
  559.  
  560.  
  561. [ 8.632969] systemd[1]: Set hostname to <benpyra>.
  562. [ 8.941472] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  563. [ 8.979184] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  564. [ 9.125584] systemd[1]: /lib/systemd/system/dbpd.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/dbpd.pid → /run/dbpd.pid; please update the unit file accordingly.
  565. [ 9.194371] systemd[1]: Listening on initctl Compatibility Named Pipe.
  566. [ OK ] Listening on initctl Compatibility Named Pipe.
  567.  
  568.  
  569. [ 9.209202] systemd[1]: Created slice User and Session Slice.
  570. [ OK ] Created slice User [ 9.226201] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  571. and Session Slice.
  572.  
  573.  
  574. [ 9.240574] systemd[1]: Reached target Swap.
  575. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  576.  
  577.  
  578. [ OK ] Reached target Swap.
  579.  
  580.  
  581. [ OK ] Listening on fsck to fsckd communication Socket.
  582.  
  583.  
  584. [ OK ] Reached target Slices.
  585.  
  586.  
  587. [ OK ] Created slice system-getty.slice.
  588.  
  589.  
  590. [ OK ] Reached target User and Group Name Lookups.
  591.  
  592.  
  593. [ OK ] Listening on Journal Socket (/dev/log).
  594.  
  595.  
  596. [ OK ] Listening on Syslog Socket.
  597.  
  598.  
  599. [ OK ] Listening on udev Kernel Socket.
  600.  
  601.  
  602. [ OK ] Listening on Journal Audit Socket.
  603.  
  604.  
  605. [ OK ] Listening on RPCbind Server Activation Socket.
  606.  
  607.  
  608. [ OK ] Set up automount Arbitrary Executable File Formats File System Automount Point.
  609.  
  610.  
  611. [ OK ] Created slice system-serial\x2dgetty.slice.
  612.  
  613.  
  614. [ OK ] Listening on Journal Socket.
  615.  
  616.  
  617. Starting Create list of required static device nodes for the current kernel...
  618.  
  619.  
  620. Starting Set Up Additional Binary Formats...
  621.  
  622.  
  623. Starting Journal Service...
  624.  
  625.  
  626. Starting File System Check on Root Device...
  627.  
  628.  
  629. Starting Load Kernel Modules...
  630.  
  631.  
  632. Starting Set the console keyboard layout...
  633.  
  634.  
  635. Mounting POSIX Message Queue File System...
  636.  
  637.  
  638. Mounting RPC Pipe File System...
  639.  
  640.  
  641. Starting Uncomplicated firewall...
  642.  
  643.  
  644. Mounting Huge Pages File System...
  645.  
  646.  
  647. [ OK ] Listening on udev Control Socket.
  648.  
  649.  
  650. Starting udev Coldplug all Devices...
  651.  
  652.  
  653. [ OK ] Created slice system-systemd\x2dfsck.slice.
  654.  
  655.  
  656. Mounting Kernel Debug File System...
  657.  
  658.  
  659. [ 9.606966] RPC: Registered named UNIX socket transport module.
  660. [ 9.606968] RPC: Registered udp transport module.
  661. [ 9.606968] RPC: Registered tcp transport module.
  662. [ 9.606968] RPC: Registered tcp NFSv4.1 backchannel transport module.
  663. [ OK ] Started Create list of required static device nodes for the current kernel.
  664.  
  665.  
  666. [ OK ] Started File System Check on Root Device.
  667.  
  668.  
  669. [ OK ] Started Load Kernel Modules.
  670.  
  671.  
  672. [ OK ] Mounted POSIX Message Queue File System.
  673.  
  674.  
  675. [ OK ] Mounted RPC Pipe File System.
  676.  
  677.  
  678. [ OK ] Started Uncomplicated firewall.
  679.  
  680.  
  681. [ OK ] Mounted Huge Pages File System.
  682.  
  683.  
  684. [ OK ] Mounted Kernel Debug File System.
  685.  
  686.  
  687. Mounting Arbitrary Executable File Formats File System...
  688.  
  689.  
  690. Starting Apply Kernel Variables...
  691.  
  692.  
  693. Starting Remount Root and Kernel File Systems...
  694.  
  695.  
  696. [ OK ] Started Apply Kernel Variables.
  697.  
  698.  
  699. [ OK ] Mounted Arbitrary Executable File Formats File System.
  700.  
  701.  
  702. [ OK ] Started Set Up Additional Binary Formats.
  703.  
  704.  
  705. [ OK ] Started Remount Root and Kernel File Systems.
  706.  
  707.  
  708. Starting Create System Users...
  709.  
  710.  
  711. Starting Load/Save Random Seed...
  712.  
  713.  
  714. [ OK ] Started Journal Service.
  715.  
  716.  
  717. Starting Flush Journal to Persistent Storage...
  718.  
  719.  
  720. [ OK ] Started Load/Save Random Seed.
  721.  
  722.  
  723. [ 9.922856] systemd-journald[1823]: Received request to flush runtime journal from PID 1
  724. [ OK ] Started Set the console keyboard layout.
  725.  
  726.  
  727. [ OK ] Started Create System Users.
  728.  
  729.  
  730. Starting Create Static Device Nodes in /dev...
  731.  
  732.  
  733. [ OK ] Started Create Static Device Nodes in /dev.
  734.  
  735.  
  736. [ OK ] Reached target Local File Systems (Pre).
  737.  
  738.  
  739. Starting udev Kernel Device Manager...
  740.  
  741.  
  742. [ OK ] Started Flush Journal to Persistent Storage.
  743.  
  744.  
  745. [ OK ] Started udev Kernel Device Manager.
  746.  
  747.  
  748. [ OK ] Started udev Coldplug all Devices.
  749.  
  750.  
  751. Starting Show Plymouth Boot Screen...
  752.  
  753.  
  754. Starting Helper to synchronize boot up for ifupdown...
  755.  
  756.  
  757. [ OK ] Started Show Plymouth Boot Screen.
  758.  
  759.  
  760. [ OK ] Started Forward Password Requests to Plymouth Directory Watch.
  761.  
  762.  
  763. [ OK ] Reached target Paths.
  764.  
  765.  
  766. [ OK ] Reached target Local Encrypted Volumes.
  767.  
  768.  
  769. [ OK ] Started Helper to synchronize boot up for ifupdown.
  770.  
  771.  
  772. [ OK ] Found device /dev/ttyO2.
  773.  
  774.  
  775. [ 10.750681] bmg160_i2c 2-0069: mounting matrix not found: using identity...
  776. Starting Show Plymouth Boot Screen...
  777.  
  778.  
  779. [ 10.826814] bmg160_i2c 2-0069: Error reading reg_chip_id
  780. [ 10.845006] bmg160_i2c: probe of 2-0069 failed with error -121
  781. [ OK ] Started Show Plymouth Boot Screen.
  782.  
  783.  
  784. Starting Show Plymouth Boot Screen...
  785.  
  786.  
  787. [ OK ] Started Show Plymouth Boot Screen.
  788.  
  789.  
  790. [ 11.168675] ina2xx 1-004f: power monitor ina231 (Rshunt = 20000 uOhm)
  791. [ 11.286534] input: twl6040:vibrator as /devices/platform/44000000.ocp/48000000.interconnect/48000000.interconnect:segment@0/48070000.target-module/48070000.i2c/i2c-0/0-004b/twl6040-vibra/input/input9
  792. [ 11.323180] input input3: as5013_open
  793. [ 11.372237] Bluetooth: Core ver 2.22
  794. [ 11.385533] NET: Registered protocol family 31
  795. [ 11.398761] Bluetooth: HCI device and connection manager initialized
  796. [ 11.429570] Bluetooth: HCI socket layer initialized
  797. [ 11.460867] input input2: as5013_open
  798. [ 11.499577] input input3: as5013_open
  799. [ 11.503422] Bluetooth: L2CAP socket layer initialized
  800. Starting Show Plymouth Boot Screen...
  801.  
  802.  
  803. [ 11.531041] Bluetooth: SCO socket layer initialized
  804. [ OK ] Started Show Plymouth Boot Screen.
  805.  
  806.  
  807. [ 11.585482] Bluetooth: HCI UART driver ver 2.3
  808. [ 11.675511] Bluetooth: HCI UART protocol H4 registered
  809. [ 11.705632] input input2: as5013_open
  810. [ OK ] Found device /dev/disk/by-partuuid/27811743-01.
  811.  
  812.  
  813. [ 11.827610] Bluetooth: HCI UART protocol BCSP registered
  814. [ 11.866093] Bluetooth: HCI UART protocol LL registered
  815. [ 11.881763] Bluetooth: HCI UART protocol Broadcom registered
  816. [ 11.959568] Bluetooth: hci0: change remote baud rate command in firmware
  817. Starting File System Check on /dev/disk/by-partuuid/27811743-01...
  818.  
  819.  
  820. [ OK ] Started File System Check on /dev/disk/by-partuuid/27811743-01.
  821.  
  822.  
  823. Mounting /boot...
  824.  
  825.  
  826. [ 12.201620] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
  827. [ 12.241307] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
  828. [ 12.271941] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
  829. [ OK ] Mounted /boot.
  830.  
  831.  
  832. [ OK ] Reached target Local File Systems.
  833.  
  834.  
  835. Starting Enable support for additional executable binary formats...
  836.  
  837.  
  838. Starting Preprocess NFS configuration...
  839.  
  840.  
  841. Starting Set console font and keymap...
  842.  
  843.  
  844. Starting Raise network interfaces...
  845.  
  846.  
  847. Starting Create Volatile Files and Directories...
  848.  
  849.  
  850. Starting Tell Plymouth To Write Out Runtime Data...
  851.  
  852.  
  853. [ OK ] Started Enable support for additional executable binary formats.
  854.  
  855.  
  856. [ OK ] Started Preprocess NFS configuration.
  857.  
  858.  
  859. [ OK ] Started Set console font and keymap.
  860.  
  861.  
  862. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  863.  
  864.  
  865. [ OK ] Reached target NFS client services.
  866.  
  867.  
  868. [ OK ] Started Create Volatile Files and Directories.
  869.  
  870.  
  871. Starting Network Time Synchronization...
  872.  
  873.  
  874. Starting RPC bind portmap service...
  875.  
  876.  
  877. Starting Update UTMP about System Boot/Shutdown...
  878.  
  879.  
  880. [ 12.621464] emif_probe: error getting device data
  881. [ 12.621509] emif_probe: error getting device data
  882. [ OK ] Started Raise network interfaces.
  883.  
  884.  
  885. [ OK ] Started RPC bind portmap service.
  886.  
  887.  
  888. [ OK ] Reached target RPC Port Mapper.
  889.  
  890.  
  891. [ OK ] Reached target Remote File Systems (Pre).
  892.  
  893.  
  894. [ OK ] Reached target Remote File Systems.
  895.  
  896.  
  897. [ OK ] Started Update UTMP about System Boot/Shutdown.
  898.  
  899.  
  900. [ OK ] Started Network Time Synchronization.
  901.  
  902.  
  903. [ OK ] Reached target System Time Synchronized.
  904.  
  905.  
  906. [ OK ] Reached target System Initialization.
  907.  
  908.  
  909. [ OK ] Started Daily apt download activities.
  910.  
  911.  
  912. [ OK ] Started Daily apt upgrade and clean activities.
  913.  
  914.  
  915. [ OK ] Listening on D-Bus System Message Bus Socket.
  916.  
  917.  
  918. [ OK ] Started Trigger anacron every hour.
  919.  
  920.  
  921. [ OK ] Started Daily Cleanup of Temporary Directories.
  922.  
  923.  
  924. [ OK ] Started Daily rotation of log files.
  925.  
  926.  
  927. [ OK ] Started Daily man-db regeneration.
  928.  
  929.  
  930. [ OK ] Reached target Timers.
  931.  
  932.  
  933. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  934.  
  935.  
  936. [ OK ] Reached target Sockets.
  937.  
  938.  
  939. [ OK ] Reached target Basic System.
  940.  
  941.  
  942. [ OK ] Started Regular background program processing daemon.
  943.  
  944.  
  945. Starting Accounts Service...
  946.  
  947.  
  948. [ 12.895421] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ]
  949. [ 12.951665] emif_probe: error getting device data
  950. [ 12.951717] emif_probe: error getting device data
  951. Starting IIO Sensor Proxy service...
  952.  
  953.  
  954. Starting PVR initialisation server...
  955.  
  956.  
  957. [ OK ] Started Run anacron jobs.
  958.  
  959.  
  960. [ OK ] Started Pyra Volume Daemon.
  961.  
  962.  
  963. Starting DragonBox Package Daemon...
  964.  
  965.  
  966. [ OK ] Started D-Bus System Message Bus.
  967.  
  968.  
  969. Starting WPA supplicant...
  970.  
  971.  
  972. Starting Turn off WWAN on poweroff/reboot...
  973.  
  974.  
  975. [ OK ] Started LED config.
  976.  
  977.  
  978. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  979.  
  980.  
  981. Starting Disk Manager...
  982.  
  983.  
  984. Starting Network Manager...
  985.  
  986.  
  987. [ OK ] Started Pyra Thermal Daemon.
  988.  
  989.  
  990. Starting LSB: Mono XSP4...
  991.  
  992.  
  993. Starting System Logging Service...
  994.  
  995.  
  996. Starting Login Service...
  997.  
  998.  
  999. Starting Restore /etc/resolv.conf if the system crashed before the ppp link was shut down...
  1000.  
  1001.  
  1002. Starting Initialize hardware monitoring sensors...
  1003.  
  1004.  
  1005. Starting Avahi mDNS/DNS-SD Stack...
  1006.  
  1007.  
  1008. [ OK ] Started System Logging Service.
  1009.  
  1010.  
  1011. [ OK ] Started PVR initialisation server.
  1012.  
  1013.  
  1014. [ 13.703708] asoc-simple-card sound_bluetooth: W2CBW003 <-> 40122000.mcbsp mapping ok
  1015. [ OK ] Started Turn off WWAN on poweroff/reboot.
  1016.  
  1017.  
  1018. [ OK ] Started Restore /etc/resolv.conf if the system crashed before the ppp link was shut down.
  1019.  
  1020.  
  1021. [ OK ] Started DragonBox Package Daemon.
  1022.  
  1023.  
  1024. [ 13.828770] asoc-simple-card sound_fmradio: W2CBW003 <-> 40124000.mcbsp mapping ok
  1025. [ OK ] Started Initialize hardware monitoring sensors.
  1026.  
  1027.  
  1028. [ 13.872678] asoc-simple-card sound_telephony: gtm601 <-> 40126000.mcbsp mapping ok
  1029. [ 13.885062] snd_soc_omap_abe_twl6040: unknown parameter 'index' ignored
  1030. [ 13.931981] omap-abe-twl6040 sound: ASoC: unknown pin AFML
  1031. [ 13.956780] omap-abe-twl6040 sound: ASoC: unknown pin AFMR
  1032. [ OK ] Started LSB: Mono XSP4.
  1033.  
  1034.  
  1035. [ 14.293938] omap-abe-twl6040 sound: twl6040-legacy <-> 40132000.mcpdm mapping ok
  1036. [ 14.322758] input: Letux Cortex 15 Headset Jack as /devices/platform/sound/sound/card4/input10
  1037. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  1038.  
  1039.  
  1040. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  1041.  
  1042.  
  1043. Starting LSB: set CPUFreq kernel parameters...
  1044.  
  1045.  
  1046. Starting Hostname Service...
  1047.  
  1048.  
  1049. Starting Authorization Manager...
  1050.  
  1051.  
  1052. [ OK ] Started Manage Sound Card State (restore and store).
  1053.  
  1054.  
  1055. Starting Save/Restore Sound Card State...
  1056.  
  1057.  
  1058. [ OK ] Stopped Pyra Volume Daemon.
  1059.  
  1060.  
  1061. [ OK ] Started Pyra Volume Daemon.
  1062.  
  1063.  
  1064. [ OK ] Created slice system-systemd\x2dbacklight.slice.
  1065.  
  1066.  
  1067. Starting Load/Save Screen Backlight Brightness of backlight:backlight...
  1068.  
  1069.  
  1070. [ 15.026188] dmtimer posted=0
  1071. [ 15.050831] dmtimer posted=0
  1072. [ 15.206102] wwan_on_off_rfkill_set_block: blocked: 0
  1073. [ 15.206112] wwan_on_off_set_power:on = 1
  1074. [ 15.206120] wwan_on_off_is_powered_on: gpio value = 0
  1075. [ 15.206120] wwan_on_off_is_powered_on: return 'false'
  1076. [ 15.206120] wwan_on_off_set_power: state 0
  1077. [ 15.206120] wwan_on_off_set_power: regulator 0
  1078. [ 15.209384] wl18xx_driver wl18xx.2.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
  1079. [ 15.209385] wl18xx_driver wl18xx.2.auto: Falling back to sysfs fallback for: ti-connectivity/wl18xx-conf.bin
  1080. [ 15.271094] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -11
  1081. [ 15.271103] wlcore: WARNING falling back to default config
  1082. Starting Load/Save Screen Backlight Brightness of backlight:keyboard-backlight...
  1083.  
  1084.  
  1085. [ OK ] Started Save/Restore Sound Card State.
  1086.  
  1087.  
  1088. [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight.
  1089.  
  1090.  
  1091. [ OK ] Started Load/Save Screen Backlight Brightness of backlight:keyboard-backlight.
  1092.  
  1093.  
  1094. [ 15.808044] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
  1095. [ 15.833289] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead.
  1096. [ 15.833300] wlcore: WARNING This default nvs file can be removed from the file system
  1097. [ OK ] Started Authorization Manager.
  1098.  
  1099.  
  1100. [ OK ] Started Accounts Service.
  1101.  
  1102.  
  1103. [ OK ] Started Hostname Service.
  1104.  
  1105.  
  1106. [ OK ] Started Disk Manager.
  1107.  
  1108.  
  1109. Starting Load/Save RF Kill Switch Status...
  1110.  
  1111.  
  1112. Starting Bluetooth service...
  1113.  
  1114.  
  1115. [ OK ] Reached target Sound Card.
  1116.  
  1117.  
  1118. [ OK ] Started LSB: set CPUFreq kernel parameters.
  1119.  
  1120.  
  1121. [ OK ] Started WPA supplicant.
  1122.  
  1123.  
  1124. [ OK ] Started IIO Sensor Proxy service.
  1125.  
  1126.  
  1127. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  1128.  
  1129.  
  1130. [ OK ] Started Network Manager.
  1131.  
  1132.  
  1133. [ OK ] Started Login Service.
  1134.  
  1135.  
  1136. [ OK ] Reached target Network.
  1137.  
  1138.  
  1139. Starting OpenBSD Secure Shell server...
  1140.  
  1141.  
  1142. [ 16.323490] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1143. [ 16.323491] Bluetooth: BNEP socket layer initialized
  1144. [ 16.357726] input input2: as5013_open
  1145. [ 16.357795] input input3: as5013_open
  1146. Starting Permit User Sessions...
  1147.  
  1148.  
  1149. [ OK ] Started Pyra Input Deamon (funkeymonkey).
  1150.  
  1151.  
  1152. [ OK ] Started Bluetooth service.
  1153.  
  1154.  
  1155. [ OK ] Reached target Bluetooth.
  1156.  
  1157.  
  1158. [ OK ] Started Permit User Sessions.
  1159.  
  1160.  
  1161. Starting Light Display Manager...
  1162.  
  1163.  
  1164. Starting Hold until boot process finishes up...
  1165.  
  1166.  
  1167. [ OK ] Started OpenBSD Secure Shell server.
  1168.  
  1169.  
  1170. [ 18.053040] wwan_on_off_set_power: send impulse
  1171. [ 18.796147] wwan_on_off_is_powered_on: gpio value = 1
  1172. [ 18.801473] wwan_on_off_is_powered_on: return 'true'
  1173. [ 18.807133] wwan_on_off_set_power: done
  1174. [ 18.814920] wlcore: loaded
  1175. [ 18.818425] wwan_on_off_rfkill_set_block: blocked: 0
  1176. [ 18.823679] wwan_on_off_set_power:on = 1
  1177. [ 18.835179] wwan_on_off_is_powered_on: gpio value = 1
  1178. [ 18.840794] wwan_on_off_is_powered_on: return 'true'
  1179. [ 18.846684] wwan_on_off_set_power: state 1
  1180. [ 18.852269] wwan_on_off_set_power: regulator 1
  1181. [ 18.865983] wwan_on_off_set_power: done
  1182. [ 18.880592] input: pyraInput keyboard as /devices/virtual/input/input11
  1183. [ 18.902761] input: pyraInput Gamepad as /devices/virtual/input/input12
  1184. [ 18.936211] input: pyraInput Mouse as /devices/virtual/input/input13
  1185. [ 19.804692] wlcore: PHY firmware version: Rev 8.2.0.0.242
  1186. [ 19.903965] wlcore: firmware booted (Rev 8.9.0.0.79)
  1187. [ 19.927051] wlcore: down
  1188.  
  1189.  
  1190.  
  1191. Debian GNU/Linux 10 benpyra ttyO2
  1192.  
  1193. benpyra login: [ 20.401728] wlcore: PHY firmware version: Rev 8.2.0.0.242
  1194. [ 20.501823] wlcore: firmware booted (Rev 8.9.0.0.79)
  1195. [ 22.732153] fuse: init (API version 7.31)
  1196. [ 24.883275] wlcore: down
  1197. [ 28.636190] usb 1-2.3: new high-speed USB device number 3 using ehci-omap
  1198. [ 28.788303] usb 1-2.3: New USB device found, idVendor=1e2d, idProduct=0061, bcdDevice= 2.32
  1199. [ 28.797276] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1200. [ 28.805027] usb 1-2.3: Product: LTE Modem
  1201. [ 28.809885] usb 1-2.3: Manufacturer: Cinterion
  1202. [ 28.897343] cdc_acm 1-2.3:1.0: ttyACM0: USB ACM device
  1203. [ 28.917505] cdc_acm 1-2.3:1.2: ttyACM1: USB ACM device
  1204. [ 28.937443] cdc_acm 1-2.3:1.4: ttyACM2: USB ACM device
  1205. [ 28.947148] cdc_acm 1-2.3:1.6: ttyACM3: USB ACM device
  1206. [ 28.971394] cdc_acm 1-2.3:1.8: ttyACM4: USB ACM device
  1207. [ 28.981326] wlan0: authenticate with 1c:ed:6f:28:34:60
  1208. [ 28.992161] usbcore: registered new interface driver cdc_acm
  1209. [ 29.003819] wlan0: send auth to 1c:ed:6f:28:34:60 (try 1/3)
  1210. [ 29.020573] cdc_ether 1-2.3:1.10 wwan0: register 'cdc_ether' at usb-4a064c00.ehci-2.3, Mobile Broadband Network Device, de:ad:be:ef:00:00
  1211. [ 29.038670] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  1212. [ 29.038915] cdc_ether 1-2.3:1.12 wwan1: register 'cdc_ether' at usb-4a064c00.ehci-2.3, Mobile Broadband Network Device, de:ad:be:ef:00:01
  1213. [ 29.060521] wlan0: authenticated
  1214. [ 29.062871] usbcore: registered new interface driver cdc_ether
  1215. [ 29.078435] wlan0: associate with 1c:ed:6f:28:34:60 (try 1/3)
  1216. [ 29.160923] wlan0: RX AssocResp from 1c:ed:6f:28:34:60 (capab=0x1111 status=0 aid=5)
  1217. [ 29.189702] wlan0: associated
  1218. [ 29.389103] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1219. [ 29.389439] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 1c:ed:6f:28:34:60
  1220. [ 29.660588] wlcore: Association completed.
  1221. [ 35.686375] host1_vbus_power: supplied by modem_vbus_hdmi_power
  1222. [ 35.692784] host2_vbus_power: supplied by modem_vbus_hdmi_power
  1223. [ 35.703405] ldo3: disabling
  1224. [ 35.707213] ldo8: disabling
  1225. [ 35.710576] otg_path: disabling
  1226. [ 39.376050] Bluetooth: RFCOMM socket layer initialized
  1227. [ 39.381687] Bluetooth: RFCOMM ver 1.11
  1228. [ 43.327244] EXT4-fs (mmcblk5p1): mounted filesystem with ordered data mode. Opts: (null)
Tags: pyra
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!