Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl --all /dev/sdc
- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: Crucial_CT525MX300SSD1
- Serial Number: 172717D07738
- LU WWN Device Id: 5 00a075 117d07738
- Firmware Version: M0CR060
- User Capacity: 525,112,713,216 bytes [525 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Nov 27 12:08:36 2017 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x04) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 714) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 6) minutes.
- Conveyance self-test routine
- recommended polling time: ( 3) minutes.
- SCT capabilities: (0x0035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
- 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1109
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
- 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 173 Unknown_Attribute 0x0032 076 076 000 Old_age Always - 369
- 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0022 068 059 000 Old_age Always - 32 (Min/Max 22/41)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
- 202 Unknown_SSD_Attribute 0x0030 076 076 001 Old_age Offline - 24
- 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
- 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 152787754592
- 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4774617301
- 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 8672587115
- 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 1924
- 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Vendor (0xff) Completed without error 00% 1101 -
- # 2 Extended offline Completed without error 00% 824 -
- # 3 Extended offline Aborted by host 00% 824 -
- # 4 Vendor (0xff) Completed without error 00% 785 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement