Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 4.9.0-kali3-amd64 (devel@kali.org) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP Debian 4.9.18-1kali1 (2017-04-04)
- [ 0.000000] Command line: BOOT_IMAGE=/live/vmlinuz-4.9.0-kali3-amd64 boot=live components splash username=root hostname=kali
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b4b7efff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000b4b7f000-0x00000000b527efff] type 20
- [ 0.000000] BIOS-e820: [mem 0x00000000b527f000-0x00000000b5e7efff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000b5e7f000-0x00000000b5f7efff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000b5f7f000-0x00000000b5ffefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000b5fff000-0x00000000b5ffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffdb0000-0x00000000ffdcefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023edfffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] efi: EFI v2.31 by HPQ
- [ 0.000000] efi: ACPI=0xb5ffe000 ACPI 2.0=0xb5ffe014 SMBIOS=0xb5333218
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.39 09/26/2016
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x23ee00 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
- [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back
- [ 0.000000] 2 base 0080000000 mask 7FC0000000 write-back
- [ 0.000000] 3 base 00B8000000 mask 7FF8000000 uncachable
- [ 0.000000] 4 base 00B7000000 mask 7FFF000000 uncachable
- [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
- [ 0.000000] 6 base 0200000000 mask 7FC0000000 write-back
- [ 0.000000] 7 base 023F000000 mask 7FFF000000 uncachable
- [ 0.000000] 8 base 023EE00000 mask 7FFFE00000 uncachable
- [ 0.000000] 9 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
- [ 0.000000] e820: last_pfn = 0xb6000 max_arch_pfn = 0x400000000
- [ 0.000000] Base memory trampoline at [ffff969580097000] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] BRK [0x1a727000, 0x1a727fff] PGTABLE
- [ 0.000000] BRK [0x1a728000, 0x1a728fff] PGTABLE
- [ 0.000000] BRK [0x1a729000, 0x1a729fff] PGTABLE
- [ 0.000000] BRK [0x1a72a000, 0x1a72afff] PGTABLE
- [ 0.000000] BRK [0x1a72b000, 0x1a72bfff] PGTABLE
- [ 0.000000] BRK [0x1a72c000, 0x1a72cfff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x33b55000-0x35da1fff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000B5FFE014 000024 (v02 HPQOEM)
- [ 0.000000] ACPI: XSDT 0x00000000B5FFE120 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
- [ 0.000000] ACPI: FACP 0x00000000B5FFC000 00010C (v05 HPQOEM 198F 00000001 HP 00000001)
- [ 0.000000] ACPI: DSDT 0x00000000B5FD1000 02555B (v02 HPQOEM 198F 00000001 INTL 20110112)
- [ 0.000000] ACPI: FACS 0x00000000B5DE4000 000040
- [ 0.000000] ACPI: FACS 0x00000000B5DE4000 000040
- [ 0.000000] ACPI: HPET 0x00000000B5FFB000 000038 (v01 HPQOEM 198F 00000001 HP 00000001)
- [ 0.000000] ACPI: APIC 0x00000000B5FFA000 0000BC (v01 HPQOEM 198F 00000001 HP 00000001)
- [ 0.000000] ACPI: MCFG 0x00000000B5FF9000 00003C (v01 HPQOEM 198F 00000001 HP 00000001)
- [ 0.000000] ACPI: TCPA 0x00000000B5FF7000 000032 (v02 HPQOEM 198F 00000000 HP 00000001)
- [ 0.000000] ACPI: SSDT 0x00000000B5FCE000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
- [ 0.000000] ACPI: SSDT 0x00000000B5FCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
- [ 0.000000] ACPI: SLIC 0x00000000B5FCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
- [ 0.000000] ACPI: FPDT 0x00000000B5FCA000 000044 (v01 HPQOEM 198F 00000001 HP 00000001)
- [ 0.000000] ACPI: BGRT 0x00000000B5FC9000 000038 (v00 HPQOEM 198F 00000001 HP 00000001)
- [ 0.000000] ACPI: SSDT 0x00000000B5FC5000 000466 (v01 Isct IsctAsl 00003000 INTL 20110112)
- [ 0.000000] ACPI: SSDT 0x00000000B5FC4000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
- [ 0.000000] ACPI: SSDT 0x00000000B5FC3000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
- [ 0.000000] ACPI: SSDT 0x00000000B5FC2000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
- [ 0.000000] ACPI: SSDT 0x00000000B5FC1000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
- [ 0.000000] ACPI: ASF! 0x00000000B5FF8000 0000A5 (v32 HPQOEM 198F 00000001 HP 00000001)
- [ 0.000000] ACPI: DMAR 0x00000000B5FC0000 0000B0 (v01 INTEL HSW 00000001 INTL 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023edfffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x23edf9000-0x23edfdfff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000023edfffff]
- [ 0.000000] Device empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
- [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b4b7efff]
- [ 0.000000] node 0: [mem 0x00000000b5fff000-0x00000000b5ffffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023edfffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023edfffff]
- [ 0.000000] On node 0 totalpages: 2046235
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 22 pages reserved
- [ 0.000000] DMA zone: 3995 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 11502 pages used for memmap
- [ 0.000000] DMA32 zone: 736128 pages, LIFO batch:31
- [ 0.000000] Normal zone: 20408 pages used for memmap
- [ 0.000000] Normal zone: 1306112 pages, LIFO batch:31
- [ 0.000000] Reserving Intel graphics memory at 0x00000000b7200000-0x00000000bf1fffff
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb4b7f000-0xb527efff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb527f000-0xb5e7efff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb5e7f000-0xb5f7efff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb5f7f000-0xb5ffefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb6000000-0xb71fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xb7200000-0xbf1fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffdaffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffdb0000-0xffdcefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffdcf000-0xffffffff]
- [ 0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] percpu: Embedded 35 pages/cpu @ffff9697bea00000 s103384 r8192 d31784 u262144
- [ 0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2014239
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/live/vmlinuz-4.9.0-kali3-amd64 boot=live components splash username=root hostname=kali
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 7808944K/8184940K available (6083K kernel code, 1119K rwdata, 2796K rodata, 1388K init, 684K bss, 375996K reserved, 0K cma-reserved)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
- [ 0.000000] NR_IRQS:33024 nr_irqs:760 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2494.214 MHz processor
- [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.42 BogoMIPS (lpj=9976856)
- [ 0.000036] pid_max: default: 32768 minimum: 301
- [ 0.000060] ACPI: Core revision 20160831
- [ 0.015098] ACPI: 8 ACPI AML tables successfully acquired and loaded
- [ 0.028333] Security Framework initialized
- [ 0.028340] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.028349] AppArmor: AppArmor disabled by boot time parameter
- [ 0.028859] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.030759] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.031598] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.031613] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.031952] CPU: Physical Processor ID: 0
- [ 0.031956] CPU: Processor Core ID: 0
- [ 0.031964] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.031967] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.031974] mce: CPU supports 7 MCE banks
- [ 0.031987] CPU0: Thermal monitoring enabled (TM1)
- [ 0.032004] process: using mwait in idle threads
- [ 0.032010] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
- [ 0.032014] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
- [ 0.032397] Freeing SMP alternatives memory: 24K (ffffffffafc74000 - ffffffffafc7a000)
- [ 0.034458] efi_bgrt: Ignoring BGRT: null image address
- [ 0.038798] ftrace: allocating 24847 entries in 98 pages
- [ 0.051352] smpboot: Max logical packages: 4
- [ 0.051366] DMAR: Host address width 39
- [ 0.051370] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
- [ 0.051380] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
- [ 0.051386] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.051394] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
- [ 0.051399] DMAR: RMRR base: 0x000000b5d18000 end: 0x000000b5d37fff
- [ 0.051403] DMAR: RMRR base: 0x000000b7000000 end: 0x000000bf1fffff
- [ 0.051408] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
- [ 0.051412] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
- [ 0.051416] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
- [ 0.051815] DMAR-IR: Enabled IRQ remapping in x2apic mode
- [ 0.051819] x2apic enabled
- [ 0.051826] Switched APIC routing to cluster x2apic.
- [ 0.052419] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.092112] TSC deadline timer enabled
- [ 0.092115] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1)
- [ 0.092124] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
- [ 0.092178] ... version: 3
- [ 0.092181] ... bit width: 48
- [ 0.092184] ... generic registers: 4
- [ 0.092187] ... value mask: 0000ffffffffffff
- [ 0.092190] ... max period: 00007fffffffffff
- [ 0.092194] ... fixed-purpose events: 3
- [ 0.092197] ... event mask: 000000070000000f
- [ 0.092934] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.093061] x86: Booting SMP configuration:
- [ 0.093065] .... node #0, CPUs: #1 #2 #3
- [ 0.334262] x86: Booted up 1 node, 4 CPUs
- [ 0.334270] smpboot: Total of 4 processors activated (19958.46 BogoMIPS)
- [ 0.338664] devtmpfs: initialized
- [ 0.338747] x86/mm: Memory block size: 128MB
- [ 0.341666] PM: Registering ACPI NVS region [mem 0xb5e7f000-0xb5f7efff] (1048576 bytes)
- [ 0.341780] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.341801] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.341866] pinctrl core: initialized pinctrl subsystem
- [ 0.342003] NET: Registered protocol family 16
- [ 0.358332] cpuidle: using governor ladder
- [ 0.374341] cpuidle: using governor menu
- [ 0.374373] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.374379] ACPI: bus type PCI registered
- [ 0.374382] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.374467] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.374474] PCI: not using MMCONFIG
- [ 0.374477] PCI: Using configuration type 1 for base access
- [ 0.374524] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
- [ 0.390495] HugeTLB registered 1 GB page size, pre-allocated 0 pages
- [ 0.390500] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.390786] ACPI: Added _OSI(Module Device)
- [ 0.390791] ACPI: Added _OSI(Processor Device)
- [ 0.390795] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.390798] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.399245] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- [ 0.405899] ACPI: Dynamic OEM Table Load:
- [ 0.405913] ACPI: SSDT 0xFFFF9697B48BE400 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
- [ 0.406321] ACPI: Dynamic OEM Table Load:
- [ 0.406332] ACPI: SSDT 0xFFFF9697B4DE1800 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
- [ 0.406806] ACPI: Dynamic OEM Table Load:
- [ 0.406815] ACPI: SSDT 0xFFFF9697B4841C00 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
- [ 0.407897] ACPI : EC: EC started
- [ 0.407901] ACPI : EC: interrupt blocked
- [ 1.964366] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
- [ 1.964372] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 1.964378] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
- [ 1.964384] ACPI: Interpreter enabled
- [ 1.964417] ACPI: (supports S0 S3 S4 S5)
- [ 1.964421] ACPI: Using IOAPIC for interrupt routing
- [ 1.964450] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 1.964952] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 1.964973] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 1.966789] ACPI: Power Resource [APPR] (off)
- [ 1.969485] ACPI: Power Resource [COMP] (on)
- [ 1.969725] ACPI: Power Resource [LPP] (on)
- [ 1.971265] ACPI: Power Resource [PXP6] (on)
- [ 2.094476] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 2.094486] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 2.096550] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 2.096556] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- [ 2.097169] PCI host bridge to bus 0000:00
- [ 2.097175] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 2.097180] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 2.097184] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 2.097190] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
- [ 2.097196] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
- [ 2.097203] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
- [ 2.097208] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
- [ 2.097215] pci_bus 0000:00: root bus resource [bus 00-fe]
- [ 2.097226] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
- [ 2.097376] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
- [ 2.097388] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
- [ 2.097395] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 2.097400] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
- [ 2.097561] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
- [ 2.097570] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
- [ 2.097731] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
- [ 2.097745] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
- [ 2.097801] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 2.097883] pci 0000:00:14.0: System wakeup disabled by ACPI
- [ 2.097932] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
- [ 2.097951] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073901f 64bit]
- [ 2.098026] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 2.098149] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
- [ 2.098163] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
- [ 2.098170] pci 0000:00:19.0: reg 0x14: [mem 0xd073e000-0xd073efff]
- [ 2.098177] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
- [ 2.098239] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 2.098319] pci 0000:00:19.0: System wakeup disabled by ACPI
- [ 2.098368] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
- [ 2.098381] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
- [ 2.098444] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 2.098564] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
- [ 2.098634] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 2.098801] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
- [ 2.098873] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 2.098994] pci 0000:00:1c.3: System wakeup disabled by ACPI
- [ 2.099042] pci 0000:00:1c.5: [8086:9c1a] type 01 class 0x060400
- [ 2.099113] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 2.099277] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
- [ 2.099294] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
- [ 2.099386] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 2.099477] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 2.099531] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
- [ 2.099764] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
- [ 2.099776] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
- [ 2.099783] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
- [ 2.099789] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
- [ 2.099796] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
- [ 2.099802] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
- [ 2.099809] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
- [ 2.099848] pci 0000:00:1f.2: PME# supported from D3hot
- [ 2.099964] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
- [ 2.099976] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
- [ 2.099989] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
- [ 2.100163] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 2.100170] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
- [ 2.100249] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
- [ 2.100283] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
- [ 2.100458] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 2.100513] pci 0000:02:00.0: System wakeup disabled by ACPI
- [ 2.111464] pci 0000:00:1c.3: PCI bridge to [bus 02]
- [ 2.111472] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
- [ 2.111533] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
- [ 2.111549] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
- [ 2.111672] pci 0000:03:00.0: supports D1 D2
- [ 2.111673] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
- [ 2.123464] pci 0000:00:1c.5: PCI bridge to [bus 03]
- [ 2.123472] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
- [ 2.124692] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.124754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.124813] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.124870] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.124927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.124983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.125039] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.125095] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 2.125569] ACPI: Enabled 5 GPEs in block 00 to 7F
- [ 2.125639] ACPI : EC: interrupt unblocked
- [ 2.125650] ACPI : EC: event unblocked
- [ 2.125659] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 2.125666] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
- [ 2.125861] vgaarb: setting as boot device: PCI:0000:00:02.0
- [ 2.125865] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 2.125873] vgaarb: loaded
- [ 2.125876] vgaarb: bridge control possible 0000:00:02.0
- [ 2.125927] Registered efivars operations
- [ 2.220177] PCI: Using ACPI for IRQ routing
- [ 2.225718] PCI: pci_cache_line_size set to 64 bytes
- [ 2.225757] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
- [ 2.225758] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
- [ 2.225759] e820: reserve RAM buffer [mem 0xb4b7f000-0xb7ffffff]
- [ 2.225760] e820: reserve RAM buffer [mem 0xb6000000-0xb7ffffff]
- [ 2.225761] e820: reserve RAM buffer [mem 0x23ee00000-0x23fffffff]
- [ 2.225933] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 2.225943] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 2.227967] clocksource: Switched to clocksource hpet
- [ 2.235267] VFS: Disk quotas dquot_6.6.0
- [ 2.235301] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 2.235403] pnp: PnP ACPI init
- [ 2.235660] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 2.235665] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 2.235670] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 2.235674] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 2.235679] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
- [ 2.235683] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 2.235688] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
- [ 2.235692] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 2.235696] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 2.235701] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
- [ 2.235707] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.235898] system 00:01: [io 0x0200-0x027f] has been reserved
- [ 2.235903] system 00:01: [io 0xffff] has been reserved
- [ 2.235907] system 00:01: [io 0xffff] has been reserved
- [ 2.235911] system 00:01: [io 0xffff] has been reserved
- [ 2.235915] system 00:01: [io 0x1800-0x18fe] has been reserved
- [ 2.235920] system 00:01: [io 0xef80-0xef9f] has been reserved
- [ 2.235925] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.235985] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 2.236215] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
- [ 2.236243] pnp 00:04: Plug and Play ACPI device, IDs SYN3003 SYN0100 SYN0002 PNP0f13 (active)
- [ 2.236597] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
- [ 2.236603] system 00:05: [mem 0x40004000-0x40004fff] could not be reserved
- [ 2.236608] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 2.236917] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
- [ 2.236938] pnp: PnP ACPI: found 7 devices
- [ 2.243438] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 2.243468] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
- [ 2.243471] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
- [ 2.243476] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
- [ 2.243477] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
- [ 2.243479] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
- [ 2.243480] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
- [ 2.243488] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
- [ 2.243496] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
- [ 2.243501] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 2.243509] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
- [ 2.243519] pci 0000:00:1c.3: PCI bridge to [bus 02]
- [ 2.243525] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
- [ 2.243534] pci 0000:00:1c.5: PCI bridge to [bus 03]
- [ 2.243539] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
- [ 2.243546] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
- [ 2.243552] pci 0000:00:1c.5: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
- [ 2.243562] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 2.243564] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 2.243565] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 2.243566] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
- [ 2.243568] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
- [ 2.243569] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
- [ 2.243570] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
- [ 2.243571] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
- [ 2.243573] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
- [ 2.243574] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
- [ 2.243575] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
- [ 2.243576] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
- [ 2.243712] NET: Registered protocol family 2
- [ 2.243916] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 2.244061] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 2.244196] TCP: Hash tables configured (established 65536 bind 65536)
- [ 2.244226] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 2.244256] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 2.244338] NET: Registered protocol family 1
- [ 2.244356] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 2.244368] pci 0000:00:14.0: enabling device (0000 -> 0002)
- [ 2.249762] pci 0000:00:14.0: xHCI BIOS handoff failed (BIOS bug ?) 00010801
- [ 2.250156] PCI: CLS 64 bytes, default 64
- [ 2.250203] Unpacking initramfs...
- [ 2.965238] Freeing initrd memory: 35124K (ffff9695b3b55000 - ffff9695b5da2000)
- [ 2.965299] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 2.965305] software IO TLB [mem 0xa4b80000-0xa8b80000] (64MB) mapped at [ffff969624b80000-ffff969628b7ffff]
- [ 2.965752] audit: initializing netlink subsys (disabled)
- [ 2.965773] audit: type=2000 audit(1502728004.952:1): initialized
- [ 2.966229] workingset: timestamp_bits=40 max_order=21 bucket_order=0
- [ 2.966271] zbud: loaded
- [ 2.966799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 2.966833] io scheduler noop registered
- [ 2.966836] io scheduler deadline registered
- [ 2.966861] io scheduler cfq registered (default)
- [ 2.967611] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- [ 2.967619] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
- [ 2.967640] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
- [ 2.967644] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
- [ 2.967650] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
- [ 2.967666] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
- [ 2.967670] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
- [ 2.967676] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded
- [ 2.967685] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 2.967698] pciehp 0000:00:1c.5:pcie004: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
- [ 2.967730] pciehp 0000:00:1c.5:pcie004: service driver pciehp loaded
- [ 2.967735] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 2.967752] efifb: probing for efifb
- [ 2.967766] efifb: framebuffer at 0xc0000000, using 5120k, total 5120k
- [ 2.967770] efifb: mode is 1280x1024x32, linelength=5120, pages=1
- [ 2.967773] efifb: scrolling: redraw
- [ 2.967777] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 2.971088] Console: switching to colour frame buffer device 160x64
- [ 2.974293] fb0: EFI VGA frame buffer device
- [ 2.974320] intel_idle: MWAIT substates: 0x11142120
- [ 2.974321] intel_idle: v0.4.1 model 0x45
- [ 2.974572] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 2.974783] GHES: HEST is not enabled!
- [ 2.974861] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 2.975363] Linux agpgart interface v0.103
- [ 2.975430] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
- [ 2.975455] AMD IOMMUv2 functionality not available on this system
- [ 2.975869] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 2.977053] i8042: Detected active multiplexing controller, rev 1.1
- [ 2.977726] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.977751] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 2.977781] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 2.977804] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 2.977910] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 2.978079] mousedev: PS/2 mouse device common for all mice
- [ 2.978129] rtc_cmos 00:02: RTC can wake from S4
- [ 2.978306] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 2.978359] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 2.978403] intel_pstate: Intel P-state driver initializing
- [ 2.978694] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.979565] NET: Registered protocol family 10
- [ 2.980112] mip6: Mobile IPv6
- [ 2.980148] NET: Registered protocol family 17
- [ 2.980195] mpls_gso: MPLS GSO support
- [ 2.980662] microcode: sig=0x40651, pf=0x40, revision=0x1c
- [ 2.980866] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 2.981319] registered taskstats version 1
- [ 2.981391] zswap: loaded using pool lzo/zbud
- [ 2.982447] rtc_cmos 00:02: setting system clock to 2017-08-14 16:26:45 UTC (1502728005)
- [ 2.982640] PM: Hibernation image not present or could not be loaded.
- [ 2.985318] Freeing unused kernel memory: 1388K (ffffffffafb19000 - ffffffffafc74000)
- [ 2.985393] Write protecting the kernel read-only data: 10240k
- [ 2.985826] Freeing unused kernel memory: 44K (ffff969599ff5000 - ffff96959a000000)
- [ 2.994024] Freeing unused kernel memory: 1300K (ffff96959a2bb000 - ffff96959a400000)
- [ 3.002867] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 3.006024] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 3.068851] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 3.068931] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 3.068959] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 3.069559] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 3.069581] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 3.070423] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 3.070459] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 3.070493] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 3.070526] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 3.070562] random: udevadm: uninitialized urandom read (16 bytes read)
- [ 3.082271] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
- [ 3.083612] ACPI: Sleep Button [SLPB]
- [ 3.085223] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
- [ 3.086620] ACPI: Lid Switch [LID]
- [ 3.088090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
- [ 3.089525] ACPI: Power Button [PWRF]
- [ 3.091542] wmi: Mapper loaded
- [ 3.092806] pps_core: LinuxPPS API ver. 1 registered
- [ 3.094217] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 3.095957] PTP clock support registered
- [ 3.097502] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
- [ 3.099227] ACPI: bus type USB registered
- [ 3.099240] SCSI subsystem initialized
- [ 3.099380] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
- [ 3.103112] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 3.103127] usbcore: registered new interface driver usbfs
- [ 3.103135] usbcore: registered new interface driver hub
- [ 3.103155] usbcore: registered new device driver usb
- [ 3.108817] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 3.108907] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.113056] [drm] Initialized
- [ 3.114961] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 3.116475] ehci-pci: EHCI PCI platform driver
- [ 3.116631] libata version 3.00 loaded.
- [ 3.118999] thermal LNXTHERM:00: registered as thermal_zone0
- [ 3.120455] ACPI: Thermal Zone [CPUZ] (49 C)
- [ 3.129237] AVX2 version of gcm_enc/dec engaged.
- [ 3.130003] AES CTR mode by8 optimization enabled
- [ 3.154375] thermal LNXTHERM:01: registered as thermal_zone1
- [ 3.155735] ACPI: Thermal Zone [GFXZ] (0 C)
- [ 3.180371] thermal LNXTHERM:02: registered as thermal_zone2
- [ 3.181506] ACPI: Thermal Zone [EXTZ] (36 C)
- [ 3.205693] thermal LNXTHERM:03: registered as thermal_zone3
- [ 3.206772] ACPI: Thermal Zone [LOCZ] (38 C)
- [ 3.212500] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
- [ 3.226595] thermal LNXTHERM:04: registered as thermal_zone4
- [ 3.227686] ACPI: Thermal Zone [BATZ] (33 C)
- [ 3.228860] thermal LNXTHERM:05: registered as thermal_zone5
- [ 3.229625] ACPI: Thermal Zone [PCHZ] (0 C)
- [ 3.298744] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:b9:01:ae:94:bf
- [ 3.301407] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 3.303781] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
- [ 3.306197] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
- [ 3.309047] i801_smbus 0000:00:1f.3: SPD Write Disable is set
- [ 3.311421] i801_smbus 0000:00:1f.3: An interrupt is pending!
- [ 3.313602] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
- [ 3.318081] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 3.319673] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
- [ 3.322309] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
- [ 3.323195] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 3.323263] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.323956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.324674] usb usb1: Product: xHCI Host Controller
- [ 3.325351] usb usb1: Manufacturer: Linux 4.9.0-kali3-amd64 xhci-hcd
- [ 3.326024] usb usb1: SerialNumber: 0000:00:14.0
- [ 3.326901] hub 1-0:1.0: USB hub found
- [ 3.327598] hub 1-0:1.0: 9 ports detected
- [ 3.329134] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 3.329818] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
- [ 3.330524] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 3.331220] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.331925] usb usb2: Product: xHCI Host Controller
- [ 3.332668] usb usb2: Manufacturer: Linux 4.9.0-kali3-amd64 xhci-hcd
- [ 3.333394] usb usb2: SerialNumber: 0000:00:14.0
- [ 3.334317] hub 2-0:1.0: USB hub found
- [ 3.335078] hub 2-0:1.0: 4 ports detected
- [ 3.336133] usb: port power management may be unreliable
- [ 3.337193] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 3.338174] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
- [ 3.338892] ehci-pci 0000:00:1d.0: debug port 2
- [ 3.343494] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 3.343515] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
- [ 3.360062] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 3.362179] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.364235] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.366242] usb usb3: Product: EHCI Host Controller
- [ 3.368239] usb usb3: Manufacturer: Linux 4.9.0-kali3-amd64 ehci_hcd
- [ 3.370043] usb usb3: SerialNumber: 0000:00:1d.0
- [ 3.372222] hub 3-0:1.0: USB hub found
- [ 3.374181] hub 3-0:1.0: 3 ports detected
- [ 3.376263] ahci 0000:00:1f.2: version 3.0
- [ 3.386659] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
- [ 3.387709] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
- [ 3.388870] scsi host0: ahci
- [ 3.389774] scsi host1: ahci
- [ 3.390614] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 48
- [ 3.391410] ata2: DUMMY
- [ 3.392479] [drm] Memory usable by graphics device = 2048M
- [ 3.393254] checking generic (c0000000 500000) vs hw (c0000000 10000000)
- [ 3.393255] fb: switching to inteldrmfb from EFI VGA
- [ 3.394032] Console: switching to colour dummy device 80x25
- [ 3.394101] [drm] Replacing VGA console driver
- [ 3.400377] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 3.400385] [drm] Driver supports precise vblank timestamp query.
- [ 3.402890] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 3.459397] random: fast init done
- [ 3.466368] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 3.466702] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
- [ 3.466749] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
- [ 3.472195] fbcon: inteldrmfb (fb0) is primary device
- [ 3.522473] Console: switching to colour frame buffer device 160x64
- [ 3.539890] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 3.656091] usb 1-1: new high-speed USB device number 2 using xhci_hcd
- [ 3.707833] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.708054] usb 3-1: new high-speed USB device number 2 using ehci-pci
- [ 3.708882] ata1.00: ATA-10: INTEL SSDSC2KW240H6, LSF036C, max UDMA/133
- [ 3.708945] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 3.709218] ata1.00: READ LOG DMA EXT failed, trying unqueued
- [ 3.709276] ata1.00: failed to get Identify Device Data, Emask 0x40
- [ 3.709285] ata1.00: failed to set xfermode (err_mask=0x40)
- [ 3.796440] usb 1-1: New USB device found, idVendor=0424, idProduct=2134
- [ 3.796495] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.796540] usb 1-1: Product: USB2134B
- [ 3.796567] usb 1-1: Manufacturer: SMSC
- [ 3.797271] hub 1-1:1.0: USB hub found
- [ 3.797327] hub 1-1:1.0: 4 ports detected
- [ 3.856500] usb 3-1: New USB device found, idVendor=8087, idProduct=8000
- [ 3.856580] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.857192] hub 3-1:1.0: USB hub found
- [ 3.857429] hub 3-1:1.0: 8 ports detected
- [ 3.916042] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
- [ 3.936514] usb 2-1: New USB device found, idVendor=0424, idProduct=5534
- [ 3.936592] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
- [ 3.936660] usb 2-1: Product: USB5534B
- [ 3.936699] usb 2-1: Manufacturer: SMSC
- [ 3.937559] hub 2-1:1.0: USB hub found
- [ 3.937831] hub 2-1:1.0: 4 ports detected
- [ 3.972043] tsc: Refined TSC clocksource calibration: 2494.226 MHz
- [ 3.972098] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3eb3743e, max_idle_ns: 440795257847 ns
- [ 4.006533] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9
- [ 4.056065] usb 1-3: new high-speed USB device number 3 using xhci_hcd
- [ 4.200476] usb 1-3: New USB device found, idVendor=0424, idProduct=2134
- [ 4.200547] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.200607] usb 1-3: Product: USB2134B
- [ 4.200642] usb 1-3: Manufacturer: SMSC
- [ 4.201255] hub 1-3:1.0: USB hub found
- [ 4.201361] hub 1-3:1.0: 4 ports detected
- [ 4.320033] usb 2-3: new SuperSpeed USB device number 3 using xhci_hcd
- [ 4.340349] usb 2-3: New USB device found, idVendor=0424, idProduct=5534
- [ 4.340417] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
- [ 4.343114] usb 2-3: Product: USB5534B
- [ 4.345792] usb 2-3: Manufacturer: SMSC
- [ 4.349266] hub 2-3:1.0: USB hub found
- [ 4.353297] hub 2-3:1.0: 4 ports detected
- [ 4.420061] usb 1-1.1: new high-speed USB device number 4 using xhci_hcd
- [ 4.520686] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5567
- [ 4.521843] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.522981] usb 1-1.1: Product: Cruzer Blade
- [ 4.524124] usb 1-1.1: Manufacturer: SanDisk
- [ 4.525249] usb 1-1.1: SerialNumber: 4C530003570114116351
- [ 4.528056] usb-storage 1-1.1:1.0: USB Mass Storage device detected
- [ 4.529290] scsi host2: usb-storage 1-1.1:1.0
- [ 4.530581] usbcore: registered new interface driver usb-storage
- [ 4.532081] usbcore: registered new interface driver uas
- [ 4.640088] usb 1-5: new full-speed USB device number 5 using xhci_hcd
- [ 4.781466] usb 1-5: New USB device found, idVendor=138a, idProduct=003f
- [ 4.782596] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
- [ 4.783604] usb 1-5: SerialNumber: 00a032d5d895
- [ 4.790571] psmouse serio3: synaptics: queried max coordinates: x [..5668], y [..4762]
- [ 4.825869] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1160..]
- [ 4.860030] usb 1-3.2: new full-speed USB device number 6 using xhci_hcd
- [ 4.884549] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2768, fw id: 1658220
- [ 4.922419] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11
- [ 4.961458] usb 1-3.2: New USB device found, idVendor=8087, idProduct=07dc
- [ 4.964148] usb 1-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.996324] clocksource: Switched to clocksource tsc
- [ 5.040085] usb 1-1.2: new low-speed USB device number 7 using xhci_hcd
- [ 5.165428] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=034a
- [ 5.167836] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.169864] usb 1-1.2: Product: HP Elite USB Keyboard
- [ 5.171800] usb 1-1.2: Manufacturer: Chicony
- [ 5.177726] hidraw: raw HID events driver (C) Jiri Kosina
- [ 5.196449] usbcore: registered new interface driver usbhid
- [ 5.197589] usbhid: USB HID core driver
- [ 5.199088] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:034A.0001/input/input13
- [ 5.256146] hid-generic 0003:03F0:034A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2/input0
- [ 5.259857] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:03F0:034A.0002/input/input14
- [ 5.264060] usb 1-6: new high-speed USB device number 8 using xhci_hcd
- [ 5.320165] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2/input1
- [ 5.407021] usb 1-6: config 1 has an invalid interface number: 8 but max is 3
- [ 5.408344] usb 1-6: config 1 has no interface number 1
- [ 5.409923] usb 1-6: config 2 has an invalid interface number: 12 but max is 1
- [ 5.410930] usb 1-6: config 2 has an invalid interface number: 13 but max is 1
- [ 5.411921] usb 1-6: config 2 has an invalid interface number: 13 but max is 1
- [ 5.412781] usb 1-6: config 2 has no interface number 0
- [ 5.413628] usb 1-6: config 2 has no interface number 1
- [ 5.415652] usb 1-6: New USB device found, idVendor=03f0, idProduct=4e1d
- [ 5.416894] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.417947] usb 1-6: Product: HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
- [ 5.418829] usb 1-6: Manufacturer: Sierra Wireless, Incorporated
- [ 5.484087] usb 1-1.3: new low-speed USB device number 9 using xhci_hcd
- [ 5.540759] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
- [ 5.546556] sd 2:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
- [ 5.550809] sd 2:0:0:0: [sda] Write Protect is off
- [ 5.553483] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
- [ 5.553744] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.558566] sda: sda1 sda2
- [ 5.562115] sd 2:0:0:0: [sda] Attached SCSI removable disk
- [ 5.588202] usb 1-1.3: New USB device found, idVendor=03f0, idProduct=094a
- [ 5.590259] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.592317] usb 1-1.3: Product: HP USB Optical Mouse
- [ 5.594368] usb 1-1.3: Manufacturer: PixArt
- [ 5.599300] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:03F0:094A.0003/input/input15
- [ 5.601161] hid-generic 0003:03F0:094A.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-1.3/input0
- [ 5.704087] usb 1-7: new high-speed USB device number 10 using xhci_hcd
- [ 5.893421] usb 1-7: New USB device found, idVendor=04f2, idProduct=b3ed
- [ 5.895617] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
- [ 5.897818] usb 1-7: Product: HP HD Webcam
- [ 5.900008] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
- [ 5.902194] usb 1-7: SerialNumber: 200901010001
- [ 9.247991] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 9.252370] ata1.00: configured for UDMA/133
- [ 9.255049] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2KW24 036C PQ: 0 ANSI: 5
- [ 9.292487] sd 0:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
- [ 9.295984] sd 0:0:0:0: [sdb] Write Protect is off
- [ 9.298093] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 9.298110] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 9.302136] sdb: sdb1 sdb2 sdb3
- [ 9.304646] sd 0:0:0:0: [sdb] Attached SCSI disk
- [ 9.529367] ISO 9660 Extensions: Microsoft Joliet Level 3
- [ 9.531115] ISO 9660 Extensions: RRIP_1991A
- [ 9.545022] loop: module loaded
- [ 9.600700] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 10.381117] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 10.581779] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
- [ 10.584065] systemd[1]: Detected architecture x86-64.
- [ 10.606679] systemd[1]: Set hostname to <localhost.localdomain>.
- [ 10.608202] systemd[1]: Initializing machine ID from random generator.
- [ 11.012776] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 11.015182] systemd[1]: Listening on LVM2 metadata daemon socket.
- [ 11.017581] systemd[1]: Reached target Remote File Systems.
- [ 11.019997] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 11.022392] systemd[1]: Listening on Journal Socket.
- [ 11.024691] systemd[1]: Listening on udev Control Socket.
- [ 11.206252] systemd-journald[392]: Received request to flush runtime journal from PID 1
- [ 12.237961] random: crng init done
- [ 14.360811] Initializing HPQ6001 module
- [ 14.362373] input: HP Wireless hotkeys as /devices/virtual/input/input16
- [ 14.403060] ACPI: AC Adapter [AC] (on-line)
- [ 14.429134] hp_accel: hardware type HPB64xx found
- [ 14.468075] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
- [ 14.564099] lis3lv02d: 8 bits 3DC sensor found
- [ 14.647215] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [ 14.649156] sd 0:0:0:0: Attached scsi generic sg1 type 0
- [ 14.656006] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
- [ 14.657579] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
- [ 14.658973] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
- [ 14.708467] usbcore: registered new interface driver cdc_ncm
- [ 14.721602] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
- [ 14.723196] snd_hda_codec_idt hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
- [ 14.724792] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
- [ 14.726307] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0
- [ 14.727820] snd_hda_codec_idt hdaudioC1D0: inputs:
- [ 14.729396] snd_hda_codec_idt hdaudioC1D0: Mic=0xc
- [ 14.730857] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11
- [ 14.732255] snd_hda_codec_idt hdaudioC1D0: Line=0xf
- [ 14.734053] usbcore: registered new interface driver cdc_wdm
- [ 14.740049] ACPI: Battery Slot [BAT0] (battery present)
- [ 14.741134] ACPI: Battery Slot [BAT1] (battery absent)
- [ 14.746623] Bluetooth: Core ver 2.22
- [ 14.747542] NET: Registered protocol family 31
- [ 14.749099] Bluetooth: HCI device and connection manager initialized
- [ 14.750623] Bluetooth: HCI socket layer initialized
- [ 14.751907] Bluetooth: L2CAP socket layer initialized
- [ 14.753328] Bluetooth: SCO socket layer initialized
- [ 14.755062] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
- [ 14.756610] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
- [ 14.781559] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
- [ 14.786111] usbcore: registered new interface driver usbserial
- [ 14.787697] usbcore: registered new interface driver usbserial_generic
- [ 14.789636] usbcore: registered new interface driver btusb
- [ 14.789786] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
- [ 14.789834] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
- [ 14.789854] usbserial: USB Serial support registered for generic
- [ 14.789884] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
- [ 14.792802] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
- [ 14.798611] cdc_mbim 1-6:2.12: cdc-wdm0: USB WDM device
- [ 14.798796] cdc_mbim 1-6:2.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-6, CDC MBIM, 56:82:bb:82:cc:09
- [ 14.798817] usbcore: registered new interface driver cdc_mbim
- [ 14.805221] Bluetooth: hci0: read Intel version: 370710018002030d00
- [ 14.806909] media: Linux media interface: v0.10
- [ 14.838462] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 14.842120] usbcore: registered new interface driver qcserial
- [ 14.843715] usbserial: USB Serial support registered for Qualcomm USB modem
- [ 14.900288] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- [ 14.900291] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
- [ 14.961293] Linux video capture interface: v2.00
- [ 15.050353] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
- [ 15.052091] tpm tpm0: TPM is disabled/deactivated (0x7)
- [ 15.059765] EFI Variables Facility v0.08 2004-May-17
- [ 15.068714] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
- [ 15.134940] input: PC Speaker as /devices/platform/pcspkr/input/input24
- [ 15.180357] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
- [ 15.182194] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
- [ 15.184054] RAPL PMU: hw unit of domain package 2^-14 Joules
- [ 15.185878] RAPL PMU: hw unit of domain dram 2^-14 Joules
- [ 15.187696] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
- [ 15.205821] pstore: using zlib compression
- [ 15.207680] pstore: Registered efi as persistent store backend
- [ 15.224467] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3ed)
- [ 15.229026] uvcvideo 1-7:1.0: Entity type for entity Extension 5 was not initialized!
- [ 15.230888] uvcvideo 1-7:1.0: Entity type for entity Extension 2 was not initialized!
- [ 15.233070] uvcvideo 1-7:1.0: Entity type for entity Processing 3 was not initialized!
- [ 15.235248] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
- [ 15.237459] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input25
- [ 15.239417] usbcore: registered new interface driver uvcvideo
- [ 15.241257] USB Video Class driver (1.1.1)
- [ 15.304712] input: HP WMI hotkeys as /devices/virtual/input/input26
- [ 15.675817] Intel(R) Wireless WiFi driver for Linux
- [ 15.677271] Copyright(c) 2003- 2015 Intel Corporation
- [ 15.678287] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
- [ 15.757538] ppdev: user-space parallel port driver
- [ 15.870640] iTCO_vendor_support: vendor-support=0
- [ 15.874241] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 15.875258] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
- [ 15.877265] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 15.917584] Netfilter messages via NETLINK v0.30.
- [ 15.985761] intel_rapl: Found RAPL domain package
- [ 15.987008] intel_rapl: Found RAPL domain core
- [ 15.987969] intel_rapl: Found RAPL domain uncore
- [ 15.988906] intel_rapl: Found RAPL domain dram
- [ 16.032117] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input27
- [ 16.113412] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7260-17.ucode
- [ 16.115439] iwlwifi 0000:02:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
- [ 16.368431] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
- [ 16.372069] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 16.373260] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 16.627315] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
- [ 17.306446] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 17.524192] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 17.533261] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 17.535613] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 17.536121] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 17.742353] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 17.744080] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 17.774201] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 17.786749] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 17.789148] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 18.004215] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 18.006045] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
- [ 18.028362] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 18.224734] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 21.270117] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
- [ 21.270149] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 23.483947] fuse init (API version 7.26)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement