API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 2nd, 2020
26
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.02 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.195 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11208-ce6496d796)) #0 SMP Sun Sep 6 16:19:39 2020
  2. [ 0.000000] SoC: xRX200 rev 1.2
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
  5. [ 0.000000] MIPS: machine is TP-LINK TD-W8970
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Detected 1 available secondary CPU(s)
  10. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  11. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  17. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  18. [ 0.000000] On node 0 totalpages: 16384
  19. [ 0.000000] free_area_init_node: node 0, pgdat 806314e0, node_mem_map 8100ada0
  20. [ 0.000000] Normal zone: 128 pages used for memmap
  21. [ 0.000000] Normal zone: 0 pages reserved
  22. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  23. [ 0.000000] random: get_random_bytes called from 0x80634740 with crng_init=0
  24. [ 0.000000] percpu: Embedded 14 pages/cpu s25968 r8192 d23184 u57344
  25. [ 0.000000] pcpu-alloc: s25968 r8192 d23184 u57344 alloc=14*4096
  26. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  27. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
  28. [ 0.000000] Kernel command line: console=ttyLTQ0,115200
  29. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  30. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  31. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  32. [ 0.000000] Writing ErrCtl register=000261e0
  33. [ 0.000000] Readback ErrCtl register=000261e0
  34. [ 0.000000] Memory: 56920K/65536K available (5225K kernel code, 198K rwdata, 912K rodata, 1264K init, 230K bss, 8616K reserved, 0K cma-reserved)
  35. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  36. [ 0.000000] Hierarchical RCU implementation.
  37. [ 0.000000] NR_IRQS: 256
  38. [ 0.000000] CPU Clock: 500MHz
  39. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
  40. [ 0.000013] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
  41. [ 0.007915] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
  42. [ 0.046000] pid_max: default: 32768 minimum: 301
  43. [ 0.050922] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.057440] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.067045] Hierarchical SRCU implementation.
  46. [ 0.072592] smp: Bringing up secondary CPUs ...
  47. [ 0.078124] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  48. [ 0.078138] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  49. [ 0.078314] CPU1 revision is: 00019556 (MIPS 34Kc)
  50. [ 0.109271] Synchronize counters for CPU 1: done.
  51. [ 0.133596] smp: Brought up 1 node, 2 CPUs
  52. [ 0.142435] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  53. [ 0.152111] futex hash table entries: 512 (order: 2, 16384 bytes)
  54. [ 0.158375] pinctrl core: initialized pinctrl subsystem
  55. [ 0.165374] NET: Registered protocol family 16
  56. [ 0.182423] pinctrl-xway 1e100b10.pinmux: Init done
  57. [ 0.188896] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
  58. [ 0.201729] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
  59. [ 0.321655] PCI host bridge /fpi@10000000/pcie@d900000 ranges:
  60. [ 0.354939] usbcore: registered new interface driver usbfs
  61. [ 0.360538] usbcore: registered new interface driver hub
  62. [ 0.365975] usbcore: registered new device driver usb
  63. [ 0.371820] PCI host bridge to bus 0000:00
  64. [ 0.375864] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
  65. [ 0.382769] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
  66. [ 0.389697] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  67. [ 0.396568] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  68. [ 0.404603] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060000
  69. [ 0.404635] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pci bridge
  70. [ 0.422513] pci 0000:00:00.0: PME# supported from D0 D3hot
  71. [ 0.423375] pci 0000:01:00.0: [168c:abcd] type 00 class 0x020000
  72. [ 0.423525] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
  73. [ 0.423644] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  74. [ 0.423867] pci 0000:01:00.0: supports D1
  75. [ 0.423893] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
  76. [ 0.424241] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  77. [ 0.424307] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
  78. [ 0.424506] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
  79. [ 0.431223] pci 0000:00:00.0: BAR 9: assigned [mem 0x1c100000-0x1c1fffff pref]
  80. [ 0.438514] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c01ffff 64bit]
  81. [ 0.445909] pci 0000:01:00.0: BAR 6: assigned [mem 0x1c100000-0x1c10ffff pref]
  82. [ 0.453166] pci 0000:00:00.0: PCI bridge to [bus 01]
  83. [ 0.458195] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]
  84. [ 0.465065] pci 0000:00:00.0: bridge window [mem 0x1c100000-0x1c1fffff pref]
  85. [ 0.474807] clocksource: Switched to clocksource MIPS
  86. [ 0.482520] NET: Registered protocol family 2
  87. [ 0.488157] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  88. [ 0.495060] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  89. [ 0.501489] TCP: Hash tables configured (established 1024 bind 1024)
  90. [ 0.508083] UDP hash table entries: 256 (order: 1, 8192 bytes)
  91. [ 0.513895] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  92. [ 0.520505] NET: Registered protocol family 1
  93. [ 0.524882] PCI: CLS 0 bytes, default 32
  94. [ 0.525708] gptu: totally 6 16-bit timers/counters
  95. [ 0.530845] gptu: misc_register on minor 63
  96. [ 0.534987] gptu: succeeded to request irq 126
  97. [ 0.539510] gptu: succeeded to request irq 127
  98. [ 0.544001] gptu: succeeded to request irq 128
  99. [ 0.548550] gptu: succeeded to request irq 129
  100. [ 0.553029] gptu: succeeded to request irq 130
  101. [ 0.554804] random: fast init done
  102. [ 0.557677] gptu: succeeded to request irq 131
  103. [ 0.565722] No VPEs reserved for AP/SP, not initialize VPE loader
  104. [ 0.565722] Pass maxvpes=<n> argument as kernel argument
  105. [ 0.577107] No TCs reserved for AP/SP, not initializing RTLX.
  106. [ 0.577107] Pass maxtcs=<n> argument as kernel argument
  107. [ 0.590042] Crashlog allocated RAM at address 0x3f00000
  108. [ 0.595812] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  109. [ 0.616121] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  110. [ 0.621908] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  111. [ 0.639329] io scheduler noop registered
  112. [ 0.643230] io scheduler deadline registered (default)
  113. [ 0.653119] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
  114. [ 0.662128] console [ttyLTQ0] enabled
  115. [ 0.669386] bootconsole [early0] disabled
  116. [ 0.682517] spi-lantiq-ssc 1e100800.spi: Lantiq SSC SPI controller (Rev 8, TXFS 8, RXFS 8, DMA 1)
  117. [ 0.703745] m25p80 spi0.4: s25fl064k (8192 Kbytes)
  118. [ 0.707189] 4 fixed-partitions partitions found on MTD device spi0.4
  119. [ 0.713485] Creating 4 MTD partitions on "spi0.4":
  120. [ 0.718268] 0x000000000000-0x000000020000 : "u-boot"
  121. [ 0.725063] 0x000000020000-0x0000007c0000 : "firmware"
  122. [ 1.253703] random: crng init done
  123. [ 1.754617] 2 tplink-fw partitions found on MTD device firmware
  124. [ 1.759135] 0x000000020000-0x00000020a791 : "kernel"
  125. [ 1.765853] 0x00000020a794-0x0000007c0000 : "rootfs"
  126. [ 1.771233] mtd: device 3 (rootfs) set to be root filesystem
  127. [ 1.775758] 1 squashfs-split partitions found on MTD device rootfs
  128. [ 1.781712] 0x000000560000-0x0000007c0000 : "rootfs_data"
  129. [ 1.788852] 0x0000007c0000-0x0000007d0000 : "config"
  130. [ 1.794274] 0x0000007d0000-0x000000800000 : "boardconfig"
  131. [ 1.804258] libphy: Fixed MDIO Bus: probed
  132. [ 1.812060] wdt 1f8803f0.watchdog: Init done
  133. [ 1.820763] NET: Registered protocol family 10
  134. [ 1.827476] Segment Routing with IPv6
  135. [ 1.829812] NET: Registered protocol family 17
  136. [ 1.834373] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  137. [ 1.847159] 8021q: 802.1Q VLAN Support v1.8
  138. [ 1.962595] libphy: lantiq,xrx200-mdio: probed
  139. [ 2.043413] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:00: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:00, irq=POLL)
  140. [ 2.127395] Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4 0:05: attached PHY driver [Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4] (mii_bus:phy_addr=0:05, irq=POLL)
  141. [ 2.211376] Intel XWAY PHY11G (xRX v1.2 integrated) 0:11: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:11, irq=POLL)
  142. [ 2.295375] Intel XWAY PHY11G (xRX v1.2 integrated) 0:13: attached PHY driver [Intel XWAY PHY11G (xRX v1.2 integrated)] (mii_bus:phy_addr=0:13, irq=POLL)
  143. [ 2.311372] USB_VBUS: disabling
  144. [ 2.318914] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  145. [ 2.329003] Freeing unused kernel memory: 1264K
  146. [ 2.332150] This architecture does not have kernel memory protection.
  147. [ 3.196943] init: Console is alive
  148. [ 3.199340] init: - watchdog -
  149. [ 4.737473] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  150. [ 4.899649] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found, using dummy regulator
  151. [ 4.906814] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found, using dummy regulator
  152. [ 4.915244] dwc2 1e101000.usb: dwc2_core_reset() HANG! AHB Idle GRSTCTL=0
  153. [ 5.123222] dwc2 1e101000.usb: DWC OTG Controller
  154. [ 5.126584] dwc2 1e101000.usb: new USB bus registered, assigned bus number 1
  155. [ 5.133683] dwc2 1e101000.usb: irq 62, io mem 0x1e101000
  156. [ 5.140614] hub 1-0:1.0: USB hub found
  157. [ 5.143151] hub 1-0:1.0: 1 port detected
  158. [ 5.148464] dwc2 1e106000.usb: 1e106000.usb supply vusb_d not found, using dummy regulator
  159. [ 5.155558] dwc2 1e106000.usb: 1e106000.usb supply vusb_a not found, using dummy regulator
  160. [ 5.164362] dwc2 1e106000.usb: dwc2_core_reset() HANG! AHB Idle GRSTCTL=0
  161. [ 5.371146] dwc2 1e106000.usb: DWC OTG Controller
  162. [ 5.374480] dwc2 1e106000.usb: new USB bus registered, assigned bus number 2
  163. [ 5.381575] dwc2 1e106000.usb: irq 91, io mem 0x1e106000
  164. [ 5.388482] hub 2-0:1.0: USB hub found
  165. [ 5.390997] hub 2-0:1.0: 1 port detected
  166. [ 5.397408] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  167. [ 5.413733] init: - preinit -
  168. [ 6.235023] lantiq,xrx200-net 1e108000.eth eth0: port 5 got link
  169. [ 9.787982] jffs2: notice: (494) jffs2_build_xattr_subsystem: complete building xattr subsystem, 5 of xdatum (0 unchecked, 5 orphan) and 5 of xref (3 dead, 2 orphan) found.
  170. [ 9.807287] mount_root: overlay filesystem has not been fully initialized yet
  171. [ 9.815392] mount_root: switching to jffs2 overlay
  172. [ 9.857631] overlayfs: upper fs does not support tmpfile.
  173. [ 9.869651] urandom-seed: Seed file not found (/etc/urandom.seed)
  174. [ 10.102181] procd: - early -
  175. [ 10.103983] procd: - watchdog -
  176. [ 10.586843] lantiq,xrx200-net 1e108000.eth eth0: port 5 lost link
  177. [ 10.786220] procd: - watchdog -
  178. [ 10.788716] procd: - ubus -
  179. [ 10.941168] procd: - init -
  180. [ 12.120194] kmodloader: loading kernel modules from /etc/modules.d/*
  181. [ 12.129084] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
  182. [ 12.140182] NET: Registered protocol family 8
  183. [ 12.143183] NET: Registered protocol family 20
  184. [ 12.156166] PPP generic driver version 2.4.2
  185. [ 12.173021] ip6_tables: (C) 2000-2006 Netfilter Core Team
  186. [ 12.200860] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
  187. [ 12.217242]
  188. [ 12.217242]
  189. [ 12.217242] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
  190. [ 12.234918]
  191. [ 12.234918] Predefined debug level: 3
  192. [ 12.248493] Loading modules backported from Linux version v4.19.137-0-gc076c79e03c6
  193. [ 12.254816] Backport generated by backports.git v4.19.137-1-0-g60c3a249
  194. [ 12.265384] ip_tables: (C) 2000-2006 Netfilter Core Team
  195. [ 12.275516] Infineon Technologies DEU driver version 2.0.0
  196. [ 12.282356] IFX DEU DES initialized (multiblock).
  197. [ 12.287810] IFX DEU AES initialized (multiblock).
  198. [ 12.291942] IFX DEU ARC4 initialized (multiblock).
  199. [ 12.296418] IFX DEU SHA1 initialized.
  200. [ 12.299974] IFX DEU MD5 initialized.
  201. [ 12.303598] IFX DEU SHA1_HMAC initialized.
  202. [ 12.307631] IFX DEU MD5_HMAC initialized.
  203. [ 12.323319] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  204. [ 12.393478] NET: Registered protocol family 24
  205. [ 12.420438] xt_time: kernel timezone is -0000
  206. [ 12.562248] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
  207. [ 12.567515] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
  208. [ 12.573796] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  209. [ 12.579534] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
  210. [ 12.585823] ath9k 0000:01:00.0: Direct firmware load for ath9k-eeprom-pci-0000:01:00.0.bin failed with error -2
  211. [ 12.595185] ath9k 0000:01:00.0: Falling back to user helper
  212. [ 12.761528] urngd: v1.0.2 started.
  213. [ 33.970674] ath: phy0: disabling 5GHz band
  214. [ 33.974593] ath: EEPROM regdomain: 0x0
  215. [ 33.974612] ath: EEPROM indicates default country code should be used
  216. [ 33.974618] ath: doing EEPROM country->regdmn map search
  217. [ 33.974637] ath: country maps to regdmn code: 0x3a
  218. [ 33.974647] ath: Country alpha2 being used: US
  219. [ 33.974653] ath: Regpair used: 0x3a
  220. [ 33.990548] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  221. [ 33.995168] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xbc000000, irq=144
  222. [ 34.005332] kmodloader: done loading kernel modules from /etc/modules.d/*
  223. [ 77.514500] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  224. [ 77.535422] br-lan: port 1(eth0.1) entered blocking state
  225. [ 77.539610] br-lan: port 1(eth0.1) entered disabled state
  226. [ 77.545732] device eth0.1 entered promiscuous mode
  227. [ 77.549748] device eth0 entered promiscuous mode
  228. [ 77.566209] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  229. [ 81.691163] lantiq,xrx200-net 1e108000.eth eth0: port 5 got link
  230. [ 81.696186] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  231. [ 81.711281] br-lan: port 1(eth0.1) entered blocking state
  232. [ 81.715336] br-lan: port 1(eth0.1) entered forwarding state
  233. [ 81.730934] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  234. [ 274.294573] br-lan: port 1(eth0.1) entered disabled state
  235. [ 274.314337] device eth0.1 left promiscuous mode
  236. [ 274.317630] device eth0 left promiscuous mode
  237. [ 274.322172] br-lan: port 1(eth0.1) entered disabled state
  238. [ 274.345964] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
  239. [ 274.483922] br-lan: port 1(eth0.1) entered blocking state
  240. [ 274.488149] br-lan: port 1(eth0.1) entered disabled state
  241. [ 274.494190] device eth0.1 entered promiscuous mode
  242. [ 274.498188] device eth0 entered promiscuous mode
  243. [ 274.525429] br-lan: port 1(eth0.1) entered blocking state
  244. [ 274.529627] br-lan: port 1(eth0.1) entered forwarding state
  245. [ 410.740160] PTM 1.0.27 PTM (E1) firmware version 0.30
  246. [ 410.744192] ifxmips_ptm: PTM init succeed
  247. [ 410.751063] IPv6: ADDRCONF(NETDEV_UP): dsl0: link is not ready
  248. [ 410.766062] IPv6: ADDRCONF(NETDEV_UP): dsl0.35: link is not ready
  249. [ 460.768449] enter showtime
  250. [ 460.769966] IPv6: ADDRCONF(NETDEV_CHANGE): dsl0: link becomes ready
  251. [ 460.779320] IPv6: ADDRCONF(NETDEV_CHANGE): dsl0.35: link becomes ready
  252. [ 460.790153] enter showtime
  253. [ 466.610982] pppoe-wan: renamed from ppp0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!