TP-WN1043ND w/o tick.c

ar7100> go 0x80050100
## Starting application at 0x80050100 ...
CPU platform: Atheros AR9132 rev 2
CPU Frequency=400 MHz
CPU DDR Frequency=400 MHz
CPU AHB Frequency=200 MHz
platform frequency: 400 MHz
CPU reference clock: 5 MHz
CPU MDIO clock: 5 MHz
arguments:
  a0 = 00000001
  a1 = 81f77d24
  a2 = 00000010
  a3 = fffffffe
Cmd line:argv is invalid
Environment:
envp is invalid
Cache info:
  picache_stride    = 4096
  picache_loopcount = 16
  pdcache_stride    = 4096
  pdcache_loopcount = 8
cpu0: MIPS Technologies processor v116.147
  MMU: Standard TLB, 16 entries
  L1 i-cache: 4 ways of 512 sets, 32 bytes per line
  L1 d-cache: 4 ways of 256 sets, 32 bytes per line
  Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
  Config3=0x20
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #75 r257598M: Sun Nov  3 18:50:03 EST 2013
    root@nucleus:/usr/home/gjb/work/freebsd/head/obj/mips/mips.mips/usr/home/gjb/work/freebsd/head/src/sys/EVILGJB mips
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory  = 33554432 (32768K bytes)
avail memory = 27414528 (26MB)
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
nexus0: <MIPS32 root nexus>
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> on apb0
uart0: console (115200,n,8,1)
gpio0: <Atheros AR71XX GPIO driver> on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x2000
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0x1c02ae
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
gpioled1: <GPIO led> at pin(s) 2 on gpiobus0
gpioled2: <GPIO led> at pin(s) 5 on gpiobus0
gpioled3: <GPIO led> at pin(s) 9 on gpiobus0
gpioiic0: <GPIO I2C bit-banging driver> at pin(s) 18-19 on gpiobus0
iicbb0: <I2C bit-banging driver> on gpioiic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iic0: <I2C generic I/O> on iicbus0
rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0
rtl8366rb0: rev. 3
miibus0: <MII bus> on rtl8366rb0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on rtl8366rb0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on rtl8366rb0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on rtl8366rb0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus4: <MII bus> on rtl8366rb0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
etherswitch0: <Switch controller> on rtl8366rb0
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: set host controller mode
usbus0: EHCI version 1.0
usbus0: set host controller mode
usbus0 on ehci0
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <spibus bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0
mx25l0: w25q64, sector 65536 bytes, 128 sectors
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
ar71xx_wdog0: Previous reset was due to watchdog timeout
ath0: Vendor=0x168c, Device=0x000b
ath0: Vendor=0x168c, Device=0x000b
ath0: <Atheros 9130> at mem 0x180c0000-0x180effff on nexus0
ath0: eeprom @ 0x1fff1000 (4096 bytes)
ath0: eeprom data @ 0xbfff1000
ath0: could not map interrupt
device_attach: ath0 attach returned 6
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: Overriding MAC from EEPROM
arge0: finishing attachment, phymask 0000, proxy null
arge0: Ethernet address: 00:00:00:01:00:00
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: finishing attachment, phymask 0000, proxy null
arge1: Ethernet address: 00:00:00:01:00:01
panic: No usable event timer found!
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.