SHARE
TWEET

dmesg with usb and ethernet trouble

a guest Nov 24th, 2012 49 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 3.5.7-gentoo-gentoo-vishera (root@r250r-desktop) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #1 SMP Fri Nov 23 14:58:58 EST 2012
  4. [    0.000000] Command line: BOOT_IMAGE=/boot/kernel-3.5.7-gentoo-vishera root=/dev/sda1 ro quiet splash
  5. [    0.000000] e820: BIOS-provided physical RAM map:
  6. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
  7. [    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
  8. [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  9. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000befe2fff] usable
  10. [    0.000000] BIOS-e820: [mem 0x00000000befe3000-0x00000000bf06bfff] ACPI NVS
  11. [    0.000000] BIOS-e820: [mem 0x00000000bf06c000-0x00000000bf14cfff] reserved
  12. [    0.000000] BIOS-e820: [mem 0x00000000bf14d000-0x00000000bf14efff] usable
  13. [    0.000000] BIOS-e820: [mem 0x00000000bf14f000-0x00000000bf156fff] ACPI data
  14. [    0.000000] BIOS-e820: [mem 0x00000000bf157000-0x00000000bf2a9fff] reserved
  15. [    0.000000] BIOS-e820: [mem 0x00000000bf2aa000-0x00000000bf2aafff] usable
  16. [    0.000000] BIOS-e820: [mem 0x00000000bf2ab000-0x00000000bf2bafff] reserved
  17. [    0.000000] BIOS-e820: [mem 0x00000000bf2bb000-0x00000000bf2bbfff] ACPI NVS
  18. [    0.000000] BIOS-e820: [mem 0x00000000bf2bc000-0x00000000bf2bcfff] usable
  19. [    0.000000] BIOS-e820: [mem 0x00000000bf2bd000-0x00000000bf2c8fff] ACPI NVS
  20. [    0.000000] BIOS-e820: [mem 0x00000000bf2c9000-0x00000000bf2effff] reserved
  21. [    0.000000] BIOS-e820: [mem 0x00000000bf2f0000-0x00000000bf4f2fff] ACPI NVS
  22. [    0.000000] BIOS-e820: [mem 0x00000000bf4f3000-0x00000000bf780fff] usable
  23. [    0.000000] BIOS-e820: [mem 0x00000000bf781000-0x00000000bfef2fff] reserved
  24. [    0.000000] BIOS-e820: [mem 0x00000000bfef3000-0x00000000bfefffff] usable
  25. [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
  26. [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  27. [    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
  28. [    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
  29. [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
  30. [    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
  31. [    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
  32. [    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
  33. [    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable
  34. [    0.000000] NX (Execute Disable) protection: active
  35. [    0.000000] DMI 2.7 present.
  36. [    0.000000] DMI: MSI MS-7693/970A-G46 (MS-7693), BIOS V1.11 10/31/2012
  37. [    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
  38. [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  39. [    0.000000] No AGP bridge found
  40. [    0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
  41. [    0.000000] MTRR default type: uncachable
  42. [    0.000000] MTRR fixed ranges enabled:
  43. [    0.000000]   00000-9FFFF write-back
  44. [    0.000000]   A0000-BFFFF write-through
  45. [    0.000000]   C0000-CFFFF write-protect
  46. [    0.000000]   D0000-EBFFF uncachable
  47. [    0.000000]   EC000-FFFFF write-protect
  48. [    0.000000] MTRR variable ranges enabled:
  49. [    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
  50. [    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
  51. [    0.000000]   2 base 0000BFF00000 mask FFFFFFF00000 uncachable
  52. [    0.000000]   3 disabled
  53. [    0.000000]   4 disabled
  54. [    0.000000]   5 disabled
  55. [    0.000000]   6 disabled
  56. [    0.000000]   7 disabled
  57. [    0.000000] TOM2: 000000043f000000 aka 17392M
  58. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  59. [    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
  60. [    0.000000] e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000
  61. [    0.000000] found SMP MP-table at [mem 0x000fcee0-0x000fceef] mapped at [ffff8800000fcee0]
  62. [    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
  63. [    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
  64. [    0.000000] Using GB pages for direct mapping
  65. [    0.000000] init_memory_mapping: [mem 0x00000000-0xbfefffff]
  66. [    0.000000]  [mem 0x00000000-0x7fffffff] page 1G
  67. [    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
  68. [    0.000000]  [mem 0xbfe00000-0xbfefffff] page 4k
  69. [    0.000000] kernel direct mapping tables up to 0xbfefffff @ [mem 0x1fbfd000-0x1fffffff]
  70. [    0.000000] init_memory_mapping: [mem 0x100000000-0x43effffff]
  71. [    0.000000]  [mem 0x100000000-0x3ffffffff] page 1G
  72. [    0.000000]  [mem 0x400000000-0x43effffff] page 2M
  73. [    0.000000] kernel direct mapping tables up to 0x43effffff @ [mem 0xbfefe000-0xbfefffff]
  74. [    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
  75. [    0.000000] ACPI: XSDT 00000000bf14f068 0004C (v01 ALASKA    A M I 01072009 AMI  00010013)
  76. [    0.000000] ACPI: FACP 00000000bf154f50 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
  77. [    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
  78. [    0.000000] ACPI: DSDT 00000000bf14f140 05E10 (v02 ALASKA    A M I 00000000 INTL 20051117)
  79. [    0.000000] ACPI: FACS 00000000bf2c3f80 00040
  80. [    0.000000] ACPI: APIC 00000000bf155048 0009E (v03 ALASKA    A M I 01072009 AMI  00010013)
  81. [    0.000000] ACPI: MCFG 00000000bf1550e8 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
  82. [    0.000000] ACPI: HPET 00000000bf155128 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
  83. [    0.000000] ACPI: SSDT 00000000bf155160 01714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
  84. [    0.000000] ACPI: Local APIC address 0xfee00000
  85. [    0.000000] No NUMA configuration found
  86. [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
  87. [    0.000000] Initmem setup node 0 [mem 0x00000000-0x43effffff]
  88. [    0.000000]   NODE_DATA [mem 0x43effc000-0x43effffff]
  89. [    0.000000]  [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0
  90. [    0.000000] Zone ranges:
  91. [    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
  92. [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
  93. [    0.000000]   Normal   [mem 0x100000000-0x43effffff]
  94. [    0.000000] Movable zone start for each node
  95. [    0.000000] Early memory node ranges
  96. [    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
  97. [    0.000000]   node   0: [mem 0x00100000-0xbefe2fff]
  98. [    0.000000]   node   0: [mem 0xbf14d000-0xbf14efff]
  99. [    0.000000]   node   0: [mem 0xbf2aa000-0xbf2aafff]
  100. [    0.000000]   node   0: [mem 0xbf2bc000-0xbf2bcfff]
  101. [    0.000000]   node   0: [mem 0xbf4f3000-0xbf780fff]
  102. [    0.000000]   node   0: [mem 0xbfef3000-0xbfefffff]
  103. [    0.000000]   node   0: [mem 0x100001000-0x43effffff]
  104. [    0.000000] On node 0 totalpages: 4186638
  105. [    0.000000]   DMA zone: 64 pages used for memmap
  106. [    0.000000]   DMA zone: 6 pages reserved
  107. [    0.000000]   DMA zone: 3911 pages, LIFO batch:0
  108. [    0.000000]   DMA32 zone: 16320 pages used for memmap
  109. [    0.000000]   DMA32 zone: 762562 pages, LIFO batch:31
  110. [    0.000000]   Normal zone: 53184 pages used for memmap
  111. [    0.000000]   Normal zone: 3350591 pages, LIFO batch:31
  112. [    0.000000] ACPI: PM-Timer IO Port: 0x808
  113. [    0.000000] ACPI: Local APIC address 0xfee00000
  114. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
  115. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
  116. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
  117. [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
  118. [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
  119. [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
  120. [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
  121. [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
  122. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
  123. [    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
  124. [    0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
  125. [    0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
  126. [    0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
  127. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  128. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  129. [    0.000000] ACPI: IRQ0 used by override.
  130. [    0.000000] ACPI: IRQ2 used by override.
  131. [    0.000000] ACPI: IRQ9 used by override.
  132. [    0.000000] Using ACPI (MADT) for SMP configuration information
  133. [    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
  134. [    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
  135. [    0.000000] nr_irqs_gsi: 72
  136. [    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
  137. [    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
  138. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  139. [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  140. [    0.000000] PM: Registered nosave memory: 00000000befe3000 - 00000000bf06c000
  141. [    0.000000] PM: Registered nosave memory: 00000000bf06c000 - 00000000bf14d000
  142. [    0.000000] PM: Registered nosave memory: 00000000bf14f000 - 00000000bf157000
  143. [    0.000000] PM: Registered nosave memory: 00000000bf157000 - 00000000bf2aa000
  144. [    0.000000] PM: Registered nosave memory: 00000000bf2ab000 - 00000000bf2bb000
  145. [    0.000000] PM: Registered nosave memory: 00000000bf2bb000 - 00000000bf2bc000
  146. [    0.000000] PM: Registered nosave memory: 00000000bf2bd000 - 00000000bf2c9000
  147. [    0.000000] PM: Registered nosave memory: 00000000bf2c9000 - 00000000bf2f0000
  148. [    0.000000] PM: Registered nosave memory: 00000000bf2f0000 - 00000000bf4f3000
  149. [    0.000000] PM: Registered nosave memory: 00000000bf781000 - 00000000bfef3000
  150. [    0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000f8000000
  151. [    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
  152. [    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
  153. [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
  154. [    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
  155. [    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
  156. [    0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
  157. [    0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
  158. [    0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
  159. [    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
  160. [    0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
  161. [    0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
  162. [    0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
  163. [    0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
  164. [    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
  165. [    0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
  166. [    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
  167. [    0.000000] e820: [mem 0xbff00000-0xf7ffffff] available for PCI devices
  168. [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
  169. [    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88043ec00000 s77568 r8192 d20736 u262144
  170. [    0.000000] pcpu-alloc: s77568 r8192 d20736 u262144 alloc=1*2097152
  171. [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  172. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4117064
  173. [    0.000000] Policy zone: Normal
  174. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-3.5.7-gentoo-vishera root=/dev/sda1 ro quiet splash
  175. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  176. [    0.000000] __ex_table already sorted, skipping sort
  177. [    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
  178. [    0.000000] Checking aperture...
  179. [    0.000000] No AGP bridge found
  180. [    0.000000] Node 0: aperture @ f8000000 size 64 MB
  181. [    0.000000] Memory: 16402676k/17809408k available (8122k kernel code, 1062856k absent, 343876k reserved, 4911k data, 596k init)
  182. [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  183. [    0.000000] Hierarchical RCU implementation.
  184. [    0.000000] NR_IRQS:4352 nr_irqs:1288 16
  185. [    0.000000] Extended CMOS year: 2000
  186. [    0.000000] spurious 8259A interrupt: IRQ7.
  187. [    0.000000] Console: colour VGA+ 80x25
  188. [    0.000000] console [tty0] enabled
  189. [    0.000000] hpet clockevent registered
  190. [    0.000000] Fast TSC calibration using PIT
  191. [    0.001000] Detected 3500.098 MHz processor.
  192. [    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.19 BogoMIPS (lpj=3500098)
  193. [    0.000005] pid_max: default: 32768 minimum: 301
  194. [    0.000021] Security Framework initialized
  195. [    0.000023] SELinux:  Initializing.
  196. [    0.000028] SELinux:  Starting in permissive mode
  197. [    0.000859] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  198. [    0.004570] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  199. [    0.006256] Mount-cache hash table entries: 256
  200. [    0.006393] Initializing cgroup subsys cpuacct
  201. [    0.006395] Initializing cgroup subsys freezer
  202. [    0.006410] tseg: 00bff00000
  203. [    0.006411] CPU: Physical Processor ID: 0
  204. [    0.006412] CPU: Processor Core ID: 0
  205. [    0.006413] mce: CPU supports 7 MCE banks
  206. [    0.006418] LVT offset 1 assigned for vector 0xf9
  207. [    0.006466] ACPI: Core revision 20120320
  208. [    0.023054] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  209. [    0.033037] CPU0: AMD FX(tm)-8320 Eight-Core Processor            stepping 00
  210. [    0.134634] Performance Events: AMD Family 15h PMU driver.
  211. [    0.134637] ... version:                0
  212. [    0.134638] ... bit width:              48
  213. [    0.134639] ... generic registers:      6
  214. [    0.134640] ... value mask:             0000ffffffffffff
  215. [    0.134640] ... max period:             00007fffffffffff
  216. [    0.134641] ... fixed-purpose events:   0
  217. [    0.134642] ... event mask:             000000000000003f
  218. [    0.134726] MCE: In-kernel MCE decoding enabled.
  219. [    0.134795] Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
  220. [    0.227075] Brought up 8 CPUs
  221. [    0.227078] Total of 8 processors activated (56001.56 BogoMIPS).
  222. [    0.237030] devtmpfs: initialized
  223. [    0.237168] PM: Registering ACPI NVS region [mem 0xbefe3000-0xbf06bfff] (561152 bytes)
  224. [    0.237177] PM: Registering ACPI NVS region [mem 0xbf2bb000-0xbf2bbfff] (4096 bytes)
  225. [    0.237178] PM: Registering ACPI NVS region [mem 0xbf2bd000-0xbf2c8fff] (49152 bytes)
  226. [    0.237180] PM: Registering ACPI NVS region [mem 0xbf2f0000-0xbf4f2fff] (2109440 bytes)
  227. [    0.237236] RTC time: 15:59:54, date: 11/24/12
  228. [    0.237265] NET: Registered protocol family 16
  229. [    0.237369] kworker/u:0 (33) used greatest stack depth: 6552 bytes left
  230. [    0.237653] kworker/u:0 (43) used greatest stack depth: 6224 bytes left
  231. [    0.237733] ACPI: bus type pci registered
  232. [    0.237805] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  233. [    0.237807] PCI: not using MMCONFIG
  234. [    0.237808] PCI: Using configuration type 1 for base access
  235. [    0.237809] PCI: Using configuration type 1 for extended access
  236. [    0.238119] kworker/u:0 (53) used greatest stack depth: 5472 bytes left
  237. [    0.243809] kworker/u:0 (257) used greatest stack depth: 5448 bytes left
  238. [    0.246156] bio: create slab <bio-0> at 0
  239. [    0.246271] ACPI: Added _OSI(Module Device)
  240. [    0.246272] ACPI: Added _OSI(Processor Device)
  241. [    0.246273] ACPI: Added _OSI(3.0 _SCP Extensions)
  242. [    0.246274] ACPI: Added _OSI(Processor Aggregator Device)
  243. [    0.246795] ACPI: EC: Look up EC in DSDT
  244. [    0.247391] ACPI: Executed 2 blocks of module-level executable AML code
  245. [    0.254664] ACPI: Interpreter enabled
  246. [    0.254666] ACPI: (supports S0 S1 S3 S4 S5)
  247. [    0.254681] ACPI: Using IOAPIC for interrupt routing
  248. [    0.254784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  249. [    0.254812] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  250. [    0.283635] ACPI: No dock devices found.
  251. [    0.283637] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  252. [    0.283756] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  253. [    0.283914] pci_root PNP0A03:00: host bridge window [io  0x0000-0x03af]
  254. [    0.283916] pci_root PNP0A03:00: host bridge window [io  0x03e0-0x0cf7]
  255. [    0.283918] pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03df]
  256. [    0.283919] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
  257. [    0.283921] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
  258. [    0.283922] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
  259. [    0.283923] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff]
  260. [    0.283962] PCI host bridge to bus 0000:00
  261. [    0.283964] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
  262. [    0.283966] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
  263. [    0.283967] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
  264. [    0.283969] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
  265. [    0.283970] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  266. [    0.283971] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
  267. [    0.283973] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
  268. [    0.283983] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
  269. [    0.284037] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
  270. [    0.284067] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
  271. [    0.284081] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
  272. [    0.284110] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
  273. [    0.284134] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
  274. [    0.284148] pci 0000:00:11.0: reg 10: [io  0xf040-0xf047]
  275. [    0.284156] pci 0000:00:11.0: reg 14: [io  0xf030-0xf033]
  276. [    0.284163] pci 0000:00:11.0: reg 18: [io  0xf020-0xf027]
  277. [    0.284169] pci 0000:00:11.0: reg 1c: [io  0xf010-0xf013]
  278. [    0.284176] pci 0000:00:11.0: reg 20: [io  0xf000-0xf00f]
  279. [    0.284183] pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff]
  280. [    0.284226] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
  281. [    0.284236] pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff]
  282. [    0.284287] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
  283. [    0.284301] pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff]
  284. [    0.284363] pci 0000:00:12.2: supports D1 D2
  285. [    0.284364] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
  286. [    0.284381] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
  287. [    0.284390] pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff]
  288. [    0.284442] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
  289. [    0.284456] pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff]
  290. [    0.284515] pci 0000:00:13.2: supports D1 D2
  291. [    0.284516] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
  292. [    0.284533] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
  293. [    0.284589] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
  294. [    0.284604] pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
  295. [    0.284652] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
  296. [    0.284663] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
  297. [    0.284718] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
  298. [    0.284750] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
  299. [    0.284759] pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff]
  300. [    0.284811] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
  301. [    0.284864] pci 0000:00:15.0: supports D1 D2
  302. [    0.284884] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
  303. [    0.284893] pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff]
  304. [    0.284945] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
  305. [    0.284958] pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff]
  306. [    0.285018] pci 0000:00:16.2: supports D1 D2
  307. [    0.285019] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
  308. [    0.285035] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
  309. [    0.285050] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
  310. [    0.285062] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
  311. [    0.285075] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
  312. [    0.285090] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
  313. [    0.285102] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
  314. [    0.285145] pci 0000:01:00.0: [1002:9490] type 00 class 0x030000
  315. [    0.285156] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
  316. [    0.285164] pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea2ffff 64bit]
  317. [    0.285170] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
  318. [    0.285181] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
  319. [    0.285207] pci 0000:01:00.0: supports D1 D2
  320. [    0.285222] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
  321. [    0.285233] pci 0000:01:00.1: reg 10: [mem 0xfea30000-0xfea33fff 64bit]
  322. [    0.285286] pci 0000:01:00.1: supports D1 D2
  323. [    0.286335] pci 0000:00:02.0: PCI bridge to [bus 01-01]
  324. [    0.286339] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
  325. [    0.286341] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
  326. [    0.286344] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
  327. [    0.286379] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
  328. [    0.286395] pci 0000:02:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit]
  329. [    0.286476] pci 0000:02:00.0: PME# supported from D3hot
  330. [    0.288331] pci 0000:00:04.0: PCI bridge to [bus 02-02]
  331. [    0.288335] pci 0000:00:04.0:   bridge window [mem 0xfe900000-0xfe9fffff]
  332. [    0.288384] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
  333. [    0.288390] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
  334. [    0.288391] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
  335. [    0.288393] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
  336. [    0.288394] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
  337. [    0.288395] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  338. [    0.288397] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
  339. [    0.288398] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
  340. [    0.288448] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
  341. [    0.288463] pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
  342. [    0.288488] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
  343. [    0.288504] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
  344. [    0.288571] pci 0000:04:00.0: supports D1 D2
  345. [    0.288572] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  346. [    0.290330] pci 0000:00:15.0: PCI bridge to [bus 04-04]
  347. [    0.290335] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
  348. [    0.290340] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
  349. [    0.290353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  350. [    0.290431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
  351. [    0.290471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
  352. [    0.290495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
  353. [    0.290521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
  354. [    0.290551]  pci0000:00: Requesting ACPI _OSC control (0x1d)
  355. [    0.290552]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
  356. [    0.290553] ACPI _OSC control for PCIe not granted, disabling ASPM
  357. [    0.295131] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
  358. [    0.295175] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
  359. [    0.295219] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
  360. [    0.295262] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
  361. [    0.295296] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
  362. [    0.295324] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
  363. [    0.295349] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
  364. [    0.295375] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
  365. [    0.295495] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  366. [    0.295497] vgaarb: loaded
  367. [    0.295498] vgaarb: bridge control possible 0000:01:00.0
  368. [    0.295608] SCSI subsystem initialized
  369. [    0.295713] libata version 3.00 loaded.
  370. [    0.295825] ACPI: bus type usb registered
  371. [    0.295882] usbcore: registered new interface driver usbfs
  372. [    0.295914] usbcore: registered new interface driver hub
  373. [    0.295958] usbcore: registered new device driver usb
  374. [    0.296177] Advanced Linux Sound Architecture Driver Version 1.0.25.
  375. [    0.296178] PCI: Using ACPI for IRQ routing
  376. [    0.302356] PCI: pci_cache_line_size set to 64 bytes
  377. [    0.302414] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
  378. [    0.302415] e820: reserve RAM buffer [mem 0xbefe3000-0xbfffffff]
  379. [    0.302418] e820: reserve RAM buffer [mem 0xbf14f000-0xbfffffff]
  380. [    0.302420] e820: reserve RAM buffer [mem 0xbf2ab000-0xbfffffff]
  381. [    0.302421] e820: reserve RAM buffer [mem 0xbf2bd000-0xbfffffff]
  382. [    0.302423] e820: reserve RAM buffer [mem 0xbf781000-0xbfffffff]
  383. [    0.302424] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
  384. [    0.302425] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
  385. [    0.302676] cfg80211: Calling CRDA to update world regulatory domain
  386. [    0.302748] NetLabel: Initializing
  387. [    0.302749] NetLabel:  domain hash size = 128
  388. [    0.302750] NetLabel:  protocols = UNLABELED CIPSOv4
  389. [    0.302769] NetLabel:  unlabeled traffic allowed by default
  390. [    0.302866] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  391. [    0.302869] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
  392. [    0.304901] Switching to clocksource hpet
  393. [    0.312622] pnp: PnP ACPI init
  394. [    0.312627] ACPI: bus type pnp registered
  395. [    0.312738] pnp 00:00: [bus 00-ff]
  396. [    0.312741] pnp 00:00: [io  0x0cf8-0x0cff]
  397. [    0.312742] pnp 00:00: [io  0x0000-0x03af window]
  398. [    0.312744] pnp 00:00: [io  0x03e0-0x0cf7 window]
  399. [    0.312745] pnp 00:00: [io  0x03b0-0x03df window]
  400. [    0.312747] pnp 00:00: [io  0x0d00-0xffff window]
  401. [    0.312748] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  402. [    0.312750] pnp 00:00: [mem 0x000c0000-0x000dffff window]
  403. [    0.312751] pnp 00:00: [mem 0xc0000000-0xffffffff window]
  404. [    0.312752] pnp 00:00: [mem 0x00000000 window]
  405. [    0.312809] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
  406. [    0.312834] pnp 00:01: [mem 0xe0000000-0xefffffff]
  407. [    0.312892] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
  408. [    0.312894] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
  409. [    0.313195] pnp 00:02: [io  0x040b]
  410. [    0.313197] pnp 00:02: [io  0x04d6]
  411. [    0.313198] pnp 00:02: [io  0x0c00-0x0c01]
  412. [    0.313199] pnp 00:02: [io  0x0c14]
  413. [    0.313201] pnp 00:02: [io  0x0c50-0x0c51]
  414. [    0.313202] pnp 00:02: [io  0x0c52]
  415. [    0.313203] pnp 00:02: [io  0x0c6c]
  416. [    0.313204] pnp 00:02: [io  0x0c6f]
  417. [    0.313205] pnp 00:02: [io  0x0cd0-0x0cd1]
  418. [    0.313206] pnp 00:02: [io  0x0cd2-0x0cd3]
  419. [    0.313207] pnp 00:02: [io  0x0cd4-0x0cd5]
  420. [    0.313208] pnp 00:02: [io  0x0cd6-0x0cd7]
  421. [    0.313209] pnp 00:02: [io  0x0cd8-0x0cdf]
  422. [    0.313210] pnp 00:02: [io  0x0800-0x089f]
  423. [    0.313212] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
  424. [    0.313213] pnp 00:02: [io  0x0000-0x000f]
  425. [    0.313214] pnp 00:02: [io  0x0b20-0x0b3f]
  426. [    0.313215] pnp 00:02: [io  0x0900-0x090f]
  427. [    0.313216] pnp 00:02: [io  0x0910-0x091f]
  428. [    0.313219] pnp 00:02: [io  0xfe00-0xfefe]
  429. [    0.313220] pnp 00:02: [io  0x0060-0x005f disabled]
  430. [    0.313221] pnp 00:02: [io  0x0064-0x0063 disabled]
  431. [    0.313222] pnp 00:02: [io  0x0485-0x0486]
  432. [    0.313224] pnp 00:02: [mem 0xfec00000-0xfec00fff]
  433. [    0.313225] pnp 00:02: [mem 0xfee00000-0xfee00fff]
  434. [    0.313226] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
  435. [    0.313227] pnp 00:02: [mem 0xfed61000-0xfed70fff]
  436. [    0.313228] pnp 00:02: [mem 0xfec10000-0xfec10fff]
  437. [    0.313229] pnp 00:02: [mem 0xfed00000-0xfed00fff]
  438. [    0.313230] pnp 00:02: [mem 0xff800000-0xffffffff]
  439. [    0.313306] system 00:02: [io  0x040b] has been reserved
  440. [    0.313308] system 00:02: [io  0x04d6] has been reserved
  441. [    0.313310] system 00:02: [io  0x0c00-0x0c01] has been reserved
  442. [    0.313311] system 00:02: [io  0x0c14] has been reserved
  443. [    0.313313] system 00:02: [io  0x0c50-0x0c51] has been reserved
  444. [    0.313314] system 00:02: [io  0x0c52] has been reserved
  445. [    0.313315] system 00:02: [io  0x0c6c] has been reserved
  446. [    0.313317] system 00:02: [io  0x0c6f] has been reserved
  447. [    0.313318] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
  448. [    0.313319] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
  449. [    0.313321] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
  450. [    0.313322] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
  451. [    0.313323] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
  452. [    0.313324] system 00:02: [io  0x0800-0x089f] has been reserved
  453. [    0.313326] system 00:02: [io  0x0b20-0x0b3f] has been reserved
  454. [    0.313327] system 00:02: [io  0x0900-0x090f] has been reserved
  455. [    0.313328] system 00:02: [io  0x0910-0x091f] has been reserved
  456. [    0.313330] system 00:02: [io  0xfe00-0xfefe] has been reserved
  457. [    0.313331] system 00:02: [io  0x0485-0x0486] has been reserved
  458. [    0.313333] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
  459. [    0.313335] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
  460. [    0.313337] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
  461. [    0.313339] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
  462. [    0.313340] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
  463. [    0.313342] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
  464. [    0.313344] system 00:02: [mem 0xff800000-0xffffffff] has been reserved
  465. [    0.313345] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  466. [    0.313447] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
  467. [    0.313448] pnp 00:03: [io  0x0a00-0x0a0f]
  468. [    0.313450] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
  469. [    0.313451] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
  470. [    0.313507] system 00:03: [io  0x0a00-0x0a0f] has been reserved
  471. [    0.313509] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
  472. [    0.313537] pnp 00:04: [dma 4]
  473. [    0.313539] pnp 00:04: [io  0x0000-0x000f]
  474. [    0.313540] pnp 00:04: [io  0x0081-0x0083]
  475. [    0.313541] pnp 00:04: [io  0x0087]
  476. [    0.313542] pnp 00:04: [io  0x0089-0x008b]
  477. [    0.313543] pnp 00:04: [io  0x008f]
  478. [    0.313545] pnp 00:04: [io  0x00c0-0x00df]
  479. [    0.313588] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
  480. [    0.313595] pnp 00:05: [io  0x0070-0x0071]
  481. [    0.313601] pnp 00:05: [irq 8]
  482. [    0.313646] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
  483. [    0.313652] pnp 00:06: [io  0x0061]
  484. [    0.313696] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
  485. [    0.313712] pnp 00:07: [io  0x0010-0x001f]
  486. [    0.313714] pnp 00:07: [io  0x0022-0x003f]
  487. [    0.313715] pnp 00:07: [io  0x0044-0x005f]
  488. [    0.313716] pnp 00:07: [io  0x0062-0x0063]
  489. [    0.313717] pnp 00:07: [io  0x0065-0x006f]
  490. [    0.313718] pnp 00:07: [io  0x0072-0x007f]
  491. [    0.313719] pnp 00:07: [io  0x0080]
  492. [    0.313720] pnp 00:07: [io  0x0084-0x0086]
  493. [    0.313721] pnp 00:07: [io  0x0088]
  494. [    0.313722] pnp 00:07: [io  0x008c-0x008e]
  495. [    0.313723] pnp 00:07: [io  0x0090-0x009f]
  496. [    0.313724] pnp 00:07: [io  0x00a2-0x00bf]
  497. [    0.313725] pnp 00:07: [io  0x00e0-0x00ef]
  498. [    0.313726] pnp 00:07: [io  0x04d0-0x04d1]
  499. [    0.313787] system 00:07: [io  0x04d0-0x04d1] has been reserved
  500. [    0.313789] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  501. [    0.313795] pnp 00:08: [io  0x00f0-0x00ff]
  502. [    0.313798] pnp 00:08: [irq 13]
  503. [    0.313844] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
  504. [    0.313907] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
  505. [    0.313922] pnp 00:0a: [io  0x0060]
  506. [    0.313925] pnp 00:0a: [io  0x0064]
  507. [    0.313942] pnp 00:0a: [irq 1]
  508. [    0.313991] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  509. [    0.314072] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
  510. [    0.314133] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
  511. [    0.314199] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
  512. [    0.314201] pnp 00:0c: [mem 0xfec20000-0xfec200ff]
  513. [    0.314265] system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
  514. [    0.314268] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
  515. [    0.314355] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
  516. [    0.314407] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
  517. [    0.314410] pnp: PnP ACPI: found 14 devices
  518. [    0.314411] ACPI: ACPI bus type pnp unregistered
  519. [    0.319057] pci 0000:00:02.0: PCI bridge to [bus 01-01]
  520. [    0.319059] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
  521. [    0.319062] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
  522. [    0.319064] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
  523. [    0.319067] pci 0000:00:04.0: PCI bridge to [bus 02-02]
  524. [    0.319069] pci 0000:00:04.0:   bridge window [mem 0xfe900000-0xfe9fffff]
  525. [    0.319073] pci 0000:00:14.4: PCI bridge to [bus 03-03]
  526. [    0.319081] pci 0000:00:15.0: PCI bridge to [bus 04-04]
  527. [    0.319083] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
  528. [    0.319087] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
  529. [    0.319110] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
  530. [    0.319112] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
  531. [    0.319114] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
  532. [    0.319115] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
  533. [    0.319117] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
  534. [    0.319118] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
  535. [    0.319119] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
  536. [    0.319121] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
  537. [    0.319122] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
  538. [    0.319123] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
  539. [    0.319125] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
  540. [    0.319126] pci_bus 0000:03: resource 4 [io  0x0000-0x03af]
  541. [    0.319128] pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7]
  542. [    0.319129] pci_bus 0000:03: resource 6 [io  0x03b0-0x03df]
  543. [    0.319130] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff]
  544. [    0.319132] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
  545. [    0.319133] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
  546. [    0.319134] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
  547. [    0.319136] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
  548. [    0.319137] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
  549. [    0.319155] NET: Registered protocol family 2
  550. [    0.319394] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
  551. [    0.320523] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  552. [    0.322132] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  553. [    0.322327] TCP: Hash tables configured (established 524288 bind 65536)
  554. [    0.322328] TCP: reno registered
  555. [    0.322344] UDP hash table entries: 8192 (order: 6, 262144 bytes)
  556. [    0.322408] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
  557. [    0.322497] NET: Registered protocol family 1
  558. [    0.322584] RPC: Registered named UNIX socket transport module.
  559. [    0.322585] RPC: Registered udp transport module.
  560. [    0.322586] RPC: Registered tcp transport module.
  561. [    0.322586] RPC: Registered tcp NFSv4.1 backchannel transport module.
  562. [    0.610444] pci 0000:01:00.0: Boot video device
  563. [    0.610485] PCI: CLS 64 bytes, default 64
  564. [    0.610816] PCI-DMA: Disabling AGP.
  565. [    0.610880] PCI-DMA: aperture base @ f8000000 size 65536 KB
  566. [    0.610882] init_memory_mapping: [mem 0xf8000000-0xfbffffff]
  567. [    0.610884]  [mem 0xf8000000-0xfbffffff] page 2M
  568. [    0.610888] PCI-DMA: using GART IOMMU.
  569. [    0.610890] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
  570. [    0.615359] LVT offset 0 assigned for vector 0x400
  571. [    0.615382] perf: AMD IBS detected (0x000000ff)
  572. [    0.616257] microcode: CPU0: patch_level=0x0600081c
  573. [    0.616263] microcode: CPU1: patch_level=0x0600081c
  574. [    0.616269] microcode: CPU2: patch_level=0x0600081c
  575. [    0.616276] microcode: CPU3: patch_level=0x0600081c
  576. [    0.616282] microcode: CPU4: patch_level=0x0600081c
  577. [    0.616287] microcode: CPU5: patch_level=0x0600081c
  578. [    0.616290] microcode: CPU6: patch_level=0x0600081c
  579. [    0.616296] microcode: CPU7: patch_level=0x0600081c
  580. [    0.616343] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  581. [    0.616576] audit: initializing netlink socket (disabled)
  582. [    0.616591] type=2000 audit(1353772794.486:1): initialized
  583. [    0.630925] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  584. [    0.633820] VFS: Disk quotas dquot_6.5.2
  585. [    0.633878] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  586. [    0.634611] NFS: Registering the id_resolver key type
  587. [    0.634618] Key type id_resolver registered
  588. [    0.634619] Key type id_legacy registered
  589. [    0.634977] JFS: nTxBlock = 8192, nTxLock = 65536
  590. [    0.636142] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  591. [    0.636655] msgmni has been set to 32165
  592. [    0.636726] SELinux:  Registering netfilter hooks
  593. [    0.637110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  594. [    0.637111] io scheduler noop registered
  595. [    0.637112] io scheduler deadline registered
  596. [    0.637160] io scheduler cfq registered (default)
  597. [    0.637378] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  598. [    0.637433] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  599. [    0.638048] Non-volatile memory driver v1.3
  600. [    0.638050] Linux agpgart interface v0.103
  601. [    0.638261] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  602. [    0.638264] ACPI: Power Button [PWRB]
  603. [    0.638327] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  604. [    0.638329] ACPI: Power Button [PWRF]
  605. [    0.638481] ACPI: acpi_idle registered with cpuidle
  606. [    0.696599] [drm] Initialized drm 1.1.0 20060810
  607. [    0.696602] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
  608. [    0.698334] brd: module loaded
  609. [    0.699210] loop: module loaded
  610. [    0.699420] ahci 0000:00:11.0: version 3.0
  611. [    0.699523] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
  612. [    0.699525] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
  613. [    0.700442] scsi0 : ahci
  614. [    0.700562] scsi1 : ahci
  615. [    0.700660] scsi2 : ahci
  616. [    0.700761] scsi3 : ahci
  617. [    0.700863] scsi4 : ahci
  618. [    0.700964] scsi5 : ahci
  619. [    0.701252] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
  620. [    0.701254] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
  621. [    0.701256] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
  622. [    0.701258] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
  623. [    0.701260] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
  624. [    0.701262] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
  625. [    0.701637] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  626. [    0.701639] e100: Copyright(c) 1999-2006 Intel Corporation
  627. [    0.701678] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  628. [    0.701679] e1000: Copyright (c) 1999-2006 Intel Corporation.
  629. [    0.701718] sky2: driver version 1.30
  630. [    0.701841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  631. [    0.701945] r8169 0000:04:00.0: irq 72 for MSI/MSI-X
  632. [    0.702120] r8169 0000:04:00.0: eth0: RTL8168evl/8111evl at 0xffffc90012b8c000, d4:3d:7e:2d:25:05, XID 0c900800 IRQ 72
  633. [    0.702122] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  634. [    0.702320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  635. [    0.702322] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
  636. [    0.702338] ehci_hcd 0000:00:12.2: EHCI Host Controller
  637. [    0.702399] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
  638. [    0.702404] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
  639. [    0.702407] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
  640. [    0.702410] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  641. [    0.702424] QUIRK: Enable AMD PLL fix
  642. [    0.702431] ehci_hcd 0000:00:12.2: debug port 1
  643. [    0.702435] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  644. [    0.702440] ehci_hcd 0000:00:12.2: MWI active
  645. [    0.702442] ehci_hcd 0000:00:12.2: supports USB remote wakeup
  646. [    0.702451] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000
  647. [    0.702455] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
  648. [    0.708204] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
  649. [    0.708223] usb usb1: default language 0x0409
  650. [    0.708228] usb usb1: udev 1, busnum 1, minor = 0
  651. [    0.708229] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  652. [    0.708231] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  653. [    0.708232] usb usb1: Product: EHCI Host Controller
  654. [    0.708233] usb usb1: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ehci_hcd
  655. [    0.708234] usb usb1: SerialNumber: 0000:00:12.2
  656. [    0.708316] usb usb1: usb_probe_device
  657. [    0.708318] usb usb1: configuration #1 chosen from 1 choice
  658. [    0.708322] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  659. [    0.708363] hub 1-0:1.0: usb_probe_interface
  660. [    0.708365] hub 1-0:1.0: usb_probe_interface - got id
  661. [    0.708366] hub 1-0:1.0: USB hub found
  662. [    0.708369] hub 1-0:1.0: 5 ports detected
  663. [    0.708370] hub 1-0:1.0: standalone hub
  664. [    0.708371] hub 1-0:1.0: no power switching (usb 1.0)
  665. [    0.708372] hub 1-0:1.0: individual port over-current protection
  666. [    0.708373] hub 1-0:1.0: power on to power good time: 20ms
  667. [    0.708376] hub 1-0:1.0: local power source is good
  668. [    0.708377] hub 1-0:1.0: trying to enable port power on non-switchable hub
  669. [    0.708426] ehci_hcd 0000:00:13.2: EHCI Host Controller
  670. [    0.708481] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
  671. [    0.708486] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
  672. [    0.708488] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
  673. [    0.708491] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  674. [    0.708504] ehci_hcd 0000:00:13.2: debug port 1
  675. [    0.708507] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  676. [    0.708513] ehci_hcd 0000:00:13.2: MWI active
  677. [    0.708514] ehci_hcd 0000:00:13.2: supports USB remote wakeup
  678. [    0.708517] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
  679. [    0.708521] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
  680. [    0.714191] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
  681. [    0.714203] usb usb2: default language 0x0409
  682. [    0.714207] usb usb2: udev 1, busnum 2, minor = 128
  683. [    0.714209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  684. [    0.714210] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  685. [    0.714212] usb usb2: Product: EHCI Host Controller
  686. [    0.714213] usb usb2: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ehci_hcd
  687. [    0.714214] usb usb2: SerialNumber: 0000:00:13.2
  688. [    0.714299] usb usb2: usb_probe_device
  689. [    0.714301] usb usb2: configuration #1 chosen from 1 choice
  690. [    0.714306] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  691. [    0.714346] hub 2-0:1.0: usb_probe_interface
  692. [    0.714347] hub 2-0:1.0: usb_probe_interface - got id
  693. [    0.714348] hub 2-0:1.0: USB hub found
  694. [    0.714351] hub 2-0:1.0: 5 ports detected
  695. [    0.714352] hub 2-0:1.0: standalone hub
  696. [    0.714353] hub 2-0:1.0: no power switching (usb 1.0)
  697. [    0.714354] hub 2-0:1.0: individual port over-current protection
  698. [    0.714355] hub 2-0:1.0: power on to power good time: 20ms
  699. [    0.714357] hub 2-0:1.0: local power source is good
  700. [    0.714358] hub 2-0:1.0: trying to enable port power on non-switchable hub
  701. [    0.714407] ehci_hcd 0000:00:16.2: EHCI Host Controller
  702. [    0.714461] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
  703. [    0.714465] ehci_hcd 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4
  704. [    0.714467] ehci_hcd 0000:00:16.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
  705. [    0.714470] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
  706. [    0.714483] ehci_hcd 0000:00:16.2: debug port 1
  707. [    0.714486] ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  708. [    0.714492] ehci_hcd 0000:00:16.2: MWI active
  709. [    0.714493] ehci_hcd 0000:00:16.2: supports USB remote wakeup
  710. [    0.714497] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
  711. [    0.714500] ehci_hcd 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
  712. [    0.720180] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
  713. [    0.720192] usb usb3: default language 0x0409
  714. [    0.720196] usb usb3: udev 1, busnum 3, minor = 256
  715. [    0.720197] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  716. [    0.720199] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  717. [    0.720200] usb usb3: Product: EHCI Host Controller
  718. [    0.720201] usb usb3: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ehci_hcd
  719. [    0.720202] usb usb3: SerialNumber: 0000:00:16.2
  720. [    0.720284] usb usb3: usb_probe_device
  721. [    0.720286] usb usb3: configuration #1 chosen from 1 choice
  722. [    0.720289] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  723. [    0.720329] hub 3-0:1.0: usb_probe_interface
  724. [    0.720330] hub 3-0:1.0: usb_probe_interface - got id
  725. [    0.720331] hub 3-0:1.0: USB hub found
  726. [    0.720334] hub 3-0:1.0: 4 ports detected
  727. [    0.720335] hub 3-0:1.0: standalone hub
  728. [    0.720336] hub 3-0:1.0: no power switching (usb 1.0)
  729. [    0.720337] hub 3-0:1.0: individual port over-current protection
  730. [    0.720338] hub 3-0:1.0: power on to power good time: 20ms
  731. [    0.720340] hub 3-0:1.0: local power source is good
  732. [    0.720341] hub 3-0:1.0: trying to enable port power on non-switchable hub
  733. [    0.720408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  734. [    0.720409] ohci_hcd: block sizes: ed 80 td 96
  735. [    0.720426] ohci_hcd 0000:00:12.0: OHCI Host Controller
  736. [    0.720480] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
  737. [    0.720483] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk
  738. [    0.720498] ohci_hcd 0000:00:12.0: created debug files
  739. [    0.720499] ohci_hcd 0000:00:12.0: supports USB remote wakeup
  740. [    0.720507] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
  741. [    0.775087] ohci_hcd 0000:00:12.0: OHCI controller state
  742. [    0.775090] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running
  743. [    0.775092] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
  744. [    0.775095] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
  745. [    0.775097] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
  746. [    0.775100] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
  747. [    0.775107] ohci_hcd 0000:00:12.0: hcca frame #0005
  748. [    0.775110] ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
  749. [    0.775112] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
  750. [    0.775114] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
  751. [    0.775117] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
  752. [    0.775119] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
  753. [    0.775122] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
  754. [    0.775124] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS
  755. [    0.775127] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS
  756. [    0.775132] usb usb4: default language 0x0409
  757. [    0.775136] usb usb4: udev 1, busnum 4, minor = 384
  758. [    0.775138] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  759. [    0.775139] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  760. [    0.775140] usb usb4: Product: OHCI Host Controller
  761. [    0.775141] usb usb4: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ohci_hcd
  762. [    0.775143] usb usb4: SerialNumber: 0000:00:12.0
  763. [    0.775233] usb usb4: usb_probe_device
  764. [    0.775235] usb usb4: configuration #1 chosen from 1 choice
  765. [    0.775238] usb usb4: adding 4-0:1.0 (config #1, interface 0)
  766. [    0.775280] hub 4-0:1.0: usb_probe_interface
  767. [    0.775281] hub 4-0:1.0: usb_probe_interface - got id
  768. [    0.775283] hub 4-0:1.0: USB hub found
  769. [    0.775287] hub 4-0:1.0: 5 ports detected
  770. [    0.775288] hub 4-0:1.0: standalone hub
  771. [    0.775289] hub 4-0:1.0: no power switching (usb 1.0)
  772. [    0.775290] hub 4-0:1.0: no over-current protection
  773. [    0.775291] hub 4-0:1.0: power on to power good time: 4ms
  774. [    0.775294] hub 4-0:1.0: local power source is good
  775. [    0.775295] hub 4-0:1.0: trying to enable port power on non-switchable hub
  776. [    0.775313] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0
  777. [    0.775335] ohci_hcd 0000:00:13.0: OHCI Host Controller
  778. [    0.775389] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
  779. [    0.775393] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk
  780. [    0.775402] ohci_hcd 0000:00:13.0: created debug files
  781. [    0.775403] ohci_hcd 0000:00:13.0: supports USB remote wakeup
  782. [    0.775407] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
  783. [    0.808013] ehci_hcd 0000:00:12.2: GetStatus port:3 status 001403 0  ACK POWER sig=k CSC CONNECT
  784. [    0.808016] hub 1-0:1.0: port 3: status 0501 change 0001
  785. [    0.808021] ehci_hcd 0000:00:12.2: GetStatus port:4 status 001803 0  ACK POWER sig=j CSC CONNECT
  786. [    0.808023] hub 1-0:1.0: port 4: status 0501 change 0001
  787. [    0.808028] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001803 0  ACK POWER sig=j CSC CONNECT
  788. [    0.808030] hub 1-0:1.0: port 5: status 0501 change 0001
  789. [    0.814010] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000
  790. [    0.819997] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
  791. [    0.829973] ohci_hcd 0000:00:13.0: OHCI controller state
  792. [    0.829976] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running
  793. [    0.829979] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
  794. [    0.829981] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
  795. [    0.829984] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
  796. [    0.829986] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
  797. [    0.829993] ohci_hcd 0000:00:13.0: hcca frame #0005
  798. [    0.829996] ohci_hcd 0000:00:13.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
  799. [    0.829998] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
  800. [    0.830001] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
  801. [    0.830003] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
  802. [    0.830006] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
  803. [    0.830008] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
  804. [    0.830010] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS
  805. [    0.830013] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS
  806. [    0.830018] usb usb5: default language 0x0409
  807. [    0.830022] usb usb5: udev 1, busnum 5, minor = 512
  808. [    0.830023] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  809. [    0.830025] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  810. [    0.830026] usb usb5: Product: OHCI Host Controller
  811. [    0.830027] usb usb5: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ohci_hcd
  812. [    0.830028] usb usb5: SerialNumber: 0000:00:13.0
  813. [    0.830119] usb usb5: usb_probe_device
  814. [    0.830121] usb usb5: configuration #1 chosen from 1 choice
  815. [    0.830124] usb usb5: adding 5-0:1.0 (config #1, interface 0)
  816. [    0.830166] hub 5-0:1.0: usb_probe_interface
  817. [    0.830167] hub 5-0:1.0: usb_probe_interface - got id
  818. [    0.830168] hub 5-0:1.0: USB hub found
  819. [    0.830172] hub 5-0:1.0: 5 ports detected
  820. [    0.830173] hub 5-0:1.0: standalone hub
  821. [    0.830174] hub 5-0:1.0: no power switching (usb 1.0)
  822. [    0.830175] hub 5-0:1.0: no over-current protection
  823. [    0.830176] hub 5-0:1.0: power on to power good time: 4ms
  824. [    0.830180] hub 5-0:1.0: local power source is good
  825. [    0.830181] hub 5-0:1.0: trying to enable port power on non-switchable hub
  826. [    0.830199] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0
  827. [    0.830221] ohci_hcd 0000:00:14.5: OHCI Host Controller
  828. [    0.830279] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
  829. [    0.830283] ohci_hcd 0000:00:14.5: enabled AMD prefetch quirk
  830. [    0.830292] ohci_hcd 0000:00:14.5: created debug files
  831. [    0.830293] ohci_hcd 0000:00:14.5: supports USB remote wakeup
  832. [    0.830296] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
  833. [    0.874901] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000
  834. [    0.884869] ohci_hcd 0000:00:14.5: OHCI controller state
  835. [    0.884872] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running
  836. [    0.884875] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3
  837. [    0.884877] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
  838. [    0.884880] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
  839. [    0.884882] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
  840. [    0.884890] ohci_hcd 0000:00:14.5: hcca frame #0005
  841. [    0.884892] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
  842. [    0.884894] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
  843. [    0.884897] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
  844. [    0.884899] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
  845. [    0.884902] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
  846. [    0.884907] usb usb6: default language 0x0409
  847. [    0.884911] usb usb6: udev 1, busnum 6, minor = 640
  848. [    0.884913] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  849. [    0.884914] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  850. [    0.884915] usb usb6: Product: OHCI Host Controller
  851. [    0.884917] usb usb6: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ohci_hcd
  852. [    0.884918] usb usb6: SerialNumber: 0000:00:14.5
  853. [    0.885009] usb usb6: usb_probe_device
  854. [    0.885010] usb usb6: configuration #1 chosen from 1 choice
  855. [    0.885014] usb usb6: adding 6-0:1.0 (config #1, interface 0)
  856. [    0.885054] hub 6-0:1.0: usb_probe_interface
  857. [    0.885055] hub 6-0:1.0: usb_probe_interface - got id
  858. [    0.885056] hub 6-0:1.0: USB hub found
  859. [    0.885060] hub 6-0:1.0: 2 ports detected
  860. [    0.885061] hub 6-0:1.0: standalone hub
  861. [    0.885062] hub 6-0:1.0: no power switching (usb 1.0)
  862. [    0.885063] hub 6-0:1.0: no over-current protection
  863. [    0.885065] hub 6-0:1.0: power on to power good time: 4ms
  864. [    0.885068] hub 6-0:1.0: local power source is good
  865. [    0.885069] hub 6-0:1.0: trying to enable port power on non-switchable hub
  866. [    0.885108] ohci_hcd 0000:00:16.0: OHCI Host Controller
  867. [    0.885163] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
  868. [    0.885166] ohci_hcd 0000:00:16.0: enabled AMD prefetch quirk
  869. [    0.885177] ohci_hcd 0000:00:16.0: created debug files
  870. [    0.885178] ohci_hcd 0000:00:16.0: supports USB remote wakeup
  871. [    0.885182] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
  872. [    0.907825] hub 1-0:1.0: state 7 ports 5 chg 0038 evt 0000
  873. [    0.907831] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
  874. [    0.907836] ehci_hcd 0000:00:12.2: port 3 low speed --> companion
  875. [    0.939768] ohci_hcd 0000:00:16.0: OHCI controller state
  876. [    0.939772] ohci_hcd 0000:00:16.0: OHCI 1.0, NO legacy support registers, rh state running
  877. [    0.939775] ohci_hcd 0000:00:16.0: control 0x283 RWC HCFS=operational CBSR=3
  878. [    0.939777] ohci_hcd 0000:00:16.0: cmdstatus 0x00000 SOC=0
  879. [    0.939781] ohci_hcd 0000:00:16.0: intrstatus 0x00000004 SF
  880. [    0.939784] ohci_hcd 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH
  881. [    0.939791] ohci_hcd 0000:00:16.0: hcca frame #0005
  882. [    0.939793] ohci_hcd 0000:00:16.0: roothub.a 02001204 POTPGT=2 NOCP NPS NDP=4(4)
  883. [    0.939795] ohci_hcd 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000
  884. [    0.939798] ohci_hcd 0000:00:16.0: roothub.status 00008000 DRWE
  885. [    0.939801] ohci_hcd 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS
  886. [    0.939803] ohci_hcd 0000:00:16.0: roothub.portstatus [1] 0x00000100 PPS
  887. [    0.939805] ohci_hcd 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS
  888. [    0.939808] ohci_hcd 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS
  889. [    0.939813] usb usb7: default language 0x0409
  890. [    0.939817] usb usb7: udev 1, busnum 7, minor = 768
  891. [    0.939819] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  892. [    0.939820] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  893. [    0.939821] usb usb7: Product: OHCI Host Controller
  894. [    0.939822] usb usb7: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera ohci_hcd
  895. [    0.939824] usb usb7: SerialNumber: 0000:00:16.0
  896. [    0.939904] usb usb7: usb_probe_device
  897. [    0.939906] usb usb7: configuration #1 chosen from 1 choice
  898. [    0.939909] usb usb7: adding 7-0:1.0 (config #1, interface 0)
  899. [    0.939950] hub 7-0:1.0: usb_probe_interface
  900. [    0.939951] hub 7-0:1.0: usb_probe_interface - got id
  901. [    0.939952] hub 7-0:1.0: USB hub found
  902. [    0.939956] hub 7-0:1.0: 4 ports detected
  903. [    0.939957] hub 7-0:1.0: standalone hub
  904. [    0.939958] hub 7-0:1.0: no power switching (usb 1.0)
  905. [    0.939959] hub 7-0:1.0: no over-current protection
  906. [    0.939960] hub 7-0:1.0: power on to power good time: 4ms
  907. [    0.939963] hub 7-0:1.0: local power source is good
  908. [    0.939964] hub 7-0:1.0: trying to enable port power on non-switchable hub
  909. [    0.939989] ehci_hcd 0000:00:16.2: HS companion for 0000:00:16.0
  910. [    0.940030] uhci_hcd: USB Universal Host Controller Interface driver
  911. [    0.940096] xhci_hcd 0000:02:00.0: xHCI Host Controller
  912. [    0.940157] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
  913. [    0.944511] xhci_hcd 0000:02:00.0: supports USB remote wakeup
  914. [    0.944518] xhci_hcd 0000:02:00.0: irq 44, io mem 0xfe900000
  915. [    0.944551] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
  916. [    0.944555] xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
  917. [    0.944559] xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
  918. [    0.944562] xhci_hcd 0000:02:00.0: irq 76 for MSI/MSI-X
  919. [    0.944566] xhci_hcd 0000:02:00.0: irq 77 for MSI/MSI-X
  920. [    0.944569] xhci_hcd 0000:02:00.0: irq 78 for MSI/MSI-X
  921. [    0.944573] xhci_hcd 0000:02:00.0: irq 79 for MSI/MSI-X
  922. [    0.944576] xhci_hcd 0000:02:00.0: irq 80 for MSI/MSI-X
  923. [    0.944649] usb usb8: default language 0x0409
  924. [    0.944653] usb usb8: udev 1, busnum 8, minor = 896
  925. [    0.944654] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
  926. [    0.944655] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  927. [    0.944657] usb usb8: Product: xHCI Host Controller
  928. [    0.944658] usb usb8: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera xhci_hcd
  929. [    0.944659] usb usb8: SerialNumber: 0000:02:00.0
  930. [    0.944748] usb usb8: usb_probe_device
  931. [    0.944749] usb usb8: configuration #1 chosen from 1 choice
  932. [    0.944751] xHCI xhci_add_endpoint called for root hub
  933. [    0.944752] xHCI xhci_check_bandwidth called for root hub
  934. [    0.944755] usb usb8: adding 8-0:1.0 (config #1, interface 0)
  935. [    0.944794] hub 8-0:1.0: usb_probe_interface
  936. [    0.944795] hub 8-0:1.0: usb_probe_interface - got id
  937. [    0.944796] hub 8-0:1.0: USB hub found
  938. [    0.944801] hub 8-0:1.0: 2 ports detected
  939. [    0.944802] hub 8-0:1.0: standalone hub
  940. [    0.944803] hub 8-0:1.0: no power switching (usb 1.0)
  941. [    0.944804] hub 8-0:1.0: individual port over-current protection
  942. [    0.944805] hub 8-0:1.0: Single TT
  943. [    0.944806] hub 8-0:1.0: TT requires at most 8 FS bit times (666 ns)
  944. [    0.944807] hub 8-0:1.0: power on to power good time: 20ms
  945. [    0.944809] hub 8-0:1.0: local power source is good
  946. [    0.944811] hub 8-0:1.0: trying to enable port power on non-switchable hub
  947. [    0.944837] xhci_hcd 0000:02:00.0: xHCI Host Controller
  948. [    0.944891] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
  949. [    0.944894] xhci_hcd 0000:02:00.0: supports USB remote wakeup
  950. [    0.944907] usb usb9: skipped 1 descriptor after endpoint
  951. [    0.944909] usb usb9: default language 0x0409
  952. [    0.944912] usb usb9: udev 1, busnum 9, minor = 1024
  953. [    0.944914] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
  954. [    0.944915] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  955. [    0.944916] usb usb9: Product: xHCI Host Controller
  956. [    0.944918] usb usb9: Manufacturer: Linux 3.5.7-gentoo-gentoo-vishera xhci_hcd
  957. [    0.944919] usb usb9: SerialNumber: 0000:02:00.0
  958. [    0.944984] usb usb9: usb_probe_device
  959. [    0.944985] usb usb9: configuration #1 chosen from 1 choice
  960. [    0.944986] xHCI xhci_add_endpoint called for root hub
  961. [    0.944987] xHCI xhci_check_bandwidth called for root hub
  962. [    0.944990] usb usb9: adding 9-0:1.0 (config #1, interface 0)
  963. [    0.945027] hub 9-0:1.0: usb_probe_interface
  964. [    0.945028] hub 9-0:1.0: usb_probe_interface - got id
  965. [    0.945029] hub 9-0:1.0: USB hub found
  966. [    0.945033] hub 9-0:1.0: 2 ports detected
  967. [    0.945034] hub 9-0:1.0: standalone hub
  968. [    0.945035] hub 9-0:1.0: no power switching (usb 1.0)
  969. [    0.945036] hub 9-0:1.0: individual port over-current protection
  970. [    0.945037] hub 9-0:1.0: TT requires at most 8 FS bit times (666 ns)
  971. [    0.945038] hub 9-0:1.0: power on to power good time: 20ms
  972. [    0.945040] hub 9-0:1.0: local power source is good
  973. [    0.945041] hub 9-0:1.0: trying to enable port power on non-switchable hub
  974. [    0.956809] usbcore: registered new interface driver usblp
  975. [    0.956810] Initializing USB Mass Storage driver...
  976. [    0.956862] usbcore: registered new interface driver usb-storage
  977. [    0.956863] USB Mass Storage support registered.
  978. [    0.956912] usbcore: registered new interface driver libusual
  979. [    0.956989] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  980. [    0.956990] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  981. [    0.957117] serio: i8042 KBD port at 0x60,0x64 irq 1
  982. [    0.957229] mousedev: PS/2 mouse device common for all mice
  983. [    0.957440] rtc_cmos 00:05: RTC can wake from S4
  984. [    0.957550] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
  985. [    0.957567] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  986. [    0.957635] md: raid0 personality registered for level 0
  987. [    0.957761] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  988. [    0.957870] cpuidle: using governor ladder
  989. [    0.957967] cpuidle: using governor menu
  990. [    0.957968] EFI Variables Facility v0.08 2004-May-17
  991. [    0.958724] ehci_hcd 0000:00:12.2: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
  992. [    0.958739] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
  993. [    0.958923] usbcore: registered new interface driver usbhid
  994. [    0.958924] usbhid: USB HID core driver
  995. [    0.976650] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
  996. [    0.982986] snd_hda_intel 0000:01:00.1: irq 81 for MSI/MSI-X
  997. [    0.987676] Netfilter messages via NETLINK v0.30.
  998. [    0.987686] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  999. [    0.987839] ctnetlink v0.93: registering with nfnetlink.
  1000. [    0.987922] ip_tables: (C) 2000-2006 Netfilter Core Team
  1001. [    0.987948] TCP: cubic registered
  1002. [    0.987948] Initializing XFRM netlink socket
  1003. [    0.988163] NET: Registered protocol family 10
  1004. [    0.988267] ip6_tables: (C) 2000-2006 Netfilter Core Team
  1005. [    0.988288] sit: IPv6 over IPv4 tunneling driver
  1006. [    0.988456] NET: Registered protocol family 17
  1007. [    0.988469] Key type dns_resolver registered
  1008. [    0.988743] PM: Hibernation image not present or could not be loaded.
  1009. [    0.988749] registered taskstats version 1
  1010. [    0.988976]   Magic number: 4:867:993
  1011. [    0.988993] machinecheck machinecheck6: hash matches
  1012. [    0.989008] console [netcon0] enabled
  1013. [    0.989009] netconsole: network logging started
  1014. [    0.989237] ALSA device list:
  1015. [    0.989238]   #0: HDA ATI SB at 0xfeb00000 irq 16
  1016. [    0.989239]   #1: HDA ATI HDMI at 0xfea30000 irq 81
  1017. [    1.005711] ata6: SATA link down (SStatus 0 SControl 300)
  1018. [    1.009707] ehci_hcd 0000:00:12.2: port 4 full speed --> companion
  1019. [    1.009722] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003801 0  ACK POWER OWNER sig=j CONNECT
  1020. [    1.009734] hub 1-0:1.0: port 4 not reset yet, waiting 50ms
  1021. [    1.060601] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1022. [    1.060627] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
  1023. [    1.111514] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
  1024. [    1.111524] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1025. [    1.160423] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1026. [    1.160455] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1027. [    1.160483] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1028. [    1.160512] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1029. [    1.161403] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1030. [    1.161447] ata2.00: ATA-7: ST3300631AS, 3.04, max UDMA/133
  1031. [    1.161453] ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32)
  1032. [    1.162405] usb 1-5: new high-speed USB device number 4 using ehci_hcd
  1033. [    1.162495] ata2.00: configured for UDMA/133
  1034. [    1.164454] ata5.00: ATAPI: HL-DT-ST BD-RE  GGW-H20L, YL05, max UDMA/133
  1035. [    1.169636] ata5.00: configured for UDMA/133
  1036. [    1.172464] ata1.00: ATA-8: Corsair Force 3 SSD, 5.03, max UDMA/133
  1037. [    1.172466] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  1038. [    1.187382] ata3.00: HPA detected: current 976771055, native 976773168
  1039. [    1.187391] ata3.00: ATA-8: ST3500410AS, CC34, max UDMA/133
  1040. [    1.187395] ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
  1041. [    1.188443] ata4.00: ATA-8: ST3500410AS, CC34, max UDMA/133
  1042. [    1.188449] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  1043. [    1.193580] ata1.00: configured for UDMA/133
  1044. [    1.193778] scsi 0:0:0:0: Direct-Access     ATA      Corsair Force 3  5.03 PQ: 0 ANSI: 5
  1045. [    1.194097] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
  1046. [    1.194147] sd 0:0:0:0: [sda] Write Protect is off
  1047. [    1.194149] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  1048. [    1.194159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1049. [    1.194360] sd 0:0:0:0: Attached scsi generic sg0 type 0
  1050. [    1.195339]  sda: sda1 sda2
  1051. [    1.195616] sd 0:0:0:0: [sda] Attached SCSI disk
  1052. [    1.195680] scsi 1:0:0:0: Direct-Access     ATA      ST3300631AS      3.04 PQ: 0 ANSI: 5
  1053. [    1.195847] sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
  1054. [    1.195871] sd 1:0:0:0: [sdb] Write Protect is off
  1055. [    1.195873] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  1056. [    1.195883] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1057. [    1.195927] sd 1:0:0:0: Attached scsi generic sg1 type 0
  1058. [    1.212336]  sdb: sdb1 sdb2
  1059. [    1.212709] sd 1:0:0:0: [sdb] Attached SCSI disk
  1060. [    1.213343] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
  1061. [    1.213353] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1062. [    1.226754] ata3.00: configured for UDMA/133
  1063. [    1.226964] scsi 2:0:0:0: Direct-Access     ATA      ST3500410AS      CC34 PQ: 0 ANSI: 5
  1064. [    1.227155] sd 2:0:0:0: [sdc] 976771055 512-byte logical blocks: (500 GB/465 GiB)
  1065. [    1.227178] sd 2:0:0:0: [sdc] Write Protect is off
  1066. [    1.227180] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  1067. [    1.227204] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1068. [    1.227302] sd 2:0:0:0: Attached scsi generic sg2 type 0
  1069. [    1.227736] ata4.00: configured for UDMA/133
  1070. [    1.264205] usb 1-5: device descriptor read/64, error -32
  1071. [    1.271451]  sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 >
  1072. [    1.272197] sd 2:0:0:0: [sdc] Attached SCSI disk
  1073. [    1.272258] scsi 3:0:0:0: Direct-Access     ATA      ST3500410AS      CC34 PQ: 0 ANSI: 5
  1074. [    1.272459] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  1075. [    1.272532] sd 3:0:0:0: [sdd] Write Protect is off
  1076. [    1.272535] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
  1077. [    1.272565] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1078. [    1.272576] sd 3:0:0:0: Attached scsi generic sg3 type 0
  1079. [    1.303000]  sdd: sdd1 < sdd5 sdd6 > sdd2
  1080. [    1.303760] sd 3:0:0:0: [sdd] Attached SCSI disk
  1081. [    1.307081] scsi 4:0:0:0: CD-ROM            HL-DT-ST BD-RE  GGW-H20L  YL05 PQ: 0 ANSI: 5
  1082. [    1.413647] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
  1083. [    1.413652] cdrom: Uniform CD-ROM driver Revision: 3.20
  1084. [    1.414070] sr 4:0:0:0: Attached scsi CD-ROM sr0
  1085. [    1.414183] sr 4:0:0:0: Attached scsi generic sg4 type 5
  1086. [    1.414264] md: Waiting for all devices to be available before autodetect
  1087. [    1.414266] md: If you don't use raid, use raid=noautodetect
  1088. [    1.414441] md: Autodetecting RAID arrays.
  1089. [    1.415932] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
  1090. [    1.415942] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1091. [    1.454661] md: Scanned 2 and added 2 devices.
  1092. [    1.454665] md: autorun ...
  1093. [    1.454668] md: considering sdd6 ...
  1094. [    1.454676] md:  adding sdd6 ...
  1095. [    1.454683] md:  adding sdc6 ...
  1096. [    1.454688] md: created md0
  1097. [    1.454690] md: bind<sdc6>
  1098. [    1.454710] md: bind<sdd6>
  1099. [    1.454723] md: running: <sdd6><sdc6>
  1100. [    1.455033] bio: create slab <bio-1> at 1
  1101. [    1.455038] md/raid0:md0: md_size is 1171876864 sectors.
  1102. [    1.455039] md: RAID0 configuration for md0 - 1 zone
  1103. [    1.455040] md: zone0=[sdc6/sdd6]
  1104. [    1.455042]       zone-offset=         0KB, device-offset=         0KB, size= 585938432KB
  1105. [    1.455043]
  1106. [    1.455047] md0: detected capacity change from 0 to 600000954368
  1107. [    1.455095] md: ... autorun DONE.
  1108. [    1.456544] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
  1109. [    1.465000] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
  1110. [    1.466819] usb 1-5: device descriptor read/64, error -32
  1111. [    1.480641] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  1112. [    1.480649] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
  1113. [    1.481480] Freeing unused kernel memory: 596k freed
  1114. [    1.481581] Write protecting the kernel read-only data: 12288k
  1115. [    1.481945] Freeing unused kernel memory: 56k freed
  1116. [    1.485293] Freeing unused kernel memory: 1644k freed
  1117. [    1.538825] loadkeys (1108) used greatest stack depth: 4464 bytes left
  1118. [    1.615541] Refined TSC clocksource calibration: 3500.185 MHz.
  1119. [    1.615549] Switching to clocksource tsc
  1120. [    1.618546] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
  1121. [    1.618556] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1122. [    1.669380] usb 1-5: new high-speed USB device number 5 using ehci_hcd
  1123. [    1.708175] udevd[1210]: starting version 171
  1124. [    1.720310] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
  1125. [    1.720320] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1126. [    1.771168] usb 1-5: device descriptor read/64, error -32
  1127. [    1.923894] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
  1128. [    1.923899] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1129. [    1.974789] usb 1-5: device descriptor read/64, error -32
  1130. [    2.126557] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
  1131. [    2.126561] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1132. [    2.177455] usb 1-5: new high-speed USB device number 6 using ehci_hcd
  1133. [    2.578721] usb 1-5: device not accepting address 6, error -32
  1134. [    2.629610] ehci_hcd 0000:00:12.2: port 5 reset complete, port enabled
  1135. [    2.629620] ehci_hcd 0000:00:12.2: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1136. [    2.680513] usb 1-5: new high-speed USB device number 7 using ehci_hcd
  1137. [    3.081764] usb 1-5: device not accepting address 7, error -32
  1138. [    3.081783] hub 1-0:1.0: unable to enumerate USB device on port 5
  1139. [    3.087742] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0038
  1140. [    3.087755] ehci_hcd 0000:00:12.2: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1141. [    3.087766] hub 1-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
  1142. [    3.191536] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
  1143. [    3.191548] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1144. [    3.191556] hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
  1145. [    3.295338] hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100
  1146. [    3.295350] ehci_hcd 0000:00:12.2: GetStatus port:5 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1147. [    3.295359] hub 1-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
  1148. [    3.399141] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
  1149. [    3.399161] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0038
  1150. [    3.399170] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
  1151. [    3.399177] hub 4-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s
  1152. [    3.429021] rc (1105) used greatest stack depth: 4384 bytes left
  1153. [    3.504940] hub 4-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301
  1154. [    3.566824] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
  1155. [    3.617721] usb 4-3: new low-speed USB device number 2 using ohci_hcd
  1156. [    3.684600] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
  1157. [    3.735503] usb 4-3: device descriptor read/64, error -32
  1158. [    3.903107] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
  1159. [    3.954008] usb 4-3: device descriptor read/64, error -32
  1160. [    4.116777] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
  1161. [    4.167681] usb 4-3: new low-speed USB device number 3 using ohci_hcd
  1162. [    4.234553] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
  1163. [    4.285455] usb 4-3: device descriptor read/64, error -32
  1164. [    4.326436]  md0: unknown partition table
  1165. [    4.453136] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
  1166. [    4.504039] usb 4-3: device descriptor read/64, error -32
  1167. [    4.666727] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
  1168. [    4.717633] usb 4-3: new low-speed USB device number 4 using ohci_hcd
  1169. [    4.769378] EXT4-fs (sda1): re-mounted. Opts: (null)
  1170. [    5.120935] usb 4-3: device not accepting address 4, error -32
  1171. [    5.182749] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
  1172. [    5.233651] usb 4-3: new low-speed USB device number 5 using ohci_hcd
  1173. [    5.636809] usb 4-3: device not accepting address 5, error -32
  1174. [    5.636818] hub 4-0:1.0: unable to enumerate USB device on port 3
  1175. [    5.636823] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00010101 CSC PPS CCS
  1176. [    5.636826] hub 4-0:1.0: port 4, status 0101, change 0001, 12 Mb/s
  1177. [    5.740621] hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
  1178. [    5.802495] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
  1179. [    5.839058] r8169 0000:04:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
  1180. [    5.849369] r8169 0000:04:00.0: eth0: link down
  1181. [    5.849384] r8169 0000:04:00.0: eth0: link down
  1182. [    5.850452] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1183. [    5.853402] usb 4-4: new full-speed USB device number 6 using ohci_hcd
  1184. [    5.921270] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
  1185. [    5.973242] usb 4-4: device descriptor read/64, error -32
  1186. [    6.140920] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
  1187. [    6.191826] usb 4-4: device descriptor read/64, error -32
  1188. [    6.354518] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
  1189. [    6.405419] usb 4-4: new full-speed USB device number 7 using ohci_hcd
  1190. [    6.472293] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
  1191. [    6.523194] usb 4-4: device descriptor read/64, error -32
  1192. [    6.690876] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
  1193. [    6.741779] usb 4-4: device descriptor read/64, error -32
  1194. [    6.904527] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
  1195. [    6.955374] usb 4-4: new full-speed USB device number 8 using ohci_hcd
  1196. [    7.358682] usb 4-4: device not accepting address 8, error -32
  1197. [    7.420485] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
  1198. [    7.471388] usb 4-4: new full-speed USB device number 9 using ohci_hcd
  1199. [    7.874691] usb 4-4: device not accepting address 9, error -32
  1200. [    7.874707] hub 4-0:1.0: unable to enumerate USB device on port 4
  1201. [    7.874717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00010101 CSC PPS CCS
  1202. [    7.874724] hub 4-0:1.0: port 5, status 0101, change 0001, 12 Mb/s
  1203. [    7.978418] hub 4-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x101
  1204. [    8.003372] r8169 0000:04:00.0: eth0: link up
  1205. [    8.004441] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1206. [    8.040305] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
  1207. [    8.091210] usb 4-5: new full-speed USB device number 10 using ohci_hcd
  1208. [    8.158083] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
  1209. [    8.208985] usb 4-5: device descriptor read/64, error -32
  1210. [    8.376668] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
  1211. [    8.427568] usb 4-5: device descriptor read/64, error -32
  1212. [    8.590259] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
  1213. [    8.641160] usb 4-5: new full-speed USB device number 11 using ohci_hcd
  1214. [    8.708035] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
  1215. [    8.758938] usb 4-5: device descriptor read/64, error -32
  1216. [    8.926619] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
  1217. [    8.977521] usb 4-5: device descriptor read/64, error -32
  1218. [    9.140208] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
  1219. [    9.191116] usb 4-5: new full-speed USB device number 12 using ohci_hcd
  1220. [    9.594364] usb 4-5: device not accepting address 12, error -32
  1221. [    9.656231] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
  1222. [    9.707132] usb 4-5: new full-speed USB device number 13 using ohci_hcd
  1223. [   10.110444] usb 4-5: device not accepting address 13, error -32
  1224. [   10.110470] hub 4-0:1.0: unable to enumerate USB device on port 5
  1225. [   10.110477] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0000
  1226. [   10.110482] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1227. [   10.110486] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000
  1228. [   10.110491] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1229. [   10.110494] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0000
  1230. [   10.110498] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0020
  1231. [  301.544838] kworker/u:6 (898) used greatest stack depth: 4136 bytes left
  1232. [ 1590.177804] r8169 0000:04:00.0: eth0: link down
  1233. [ 1590.177868] r8169 0000:04:00.0: eth0: link down
  1234. [ 1590.178812] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1235. [ 1592.458337] r8169 0000:04:00.0: eth0: link up
  1236. [ 1592.459388] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1237. [ 1656.096281] r8169 0000:04:00.0: eth0: link down
  1238. [ 1656.096299] r8169 0000:04:00.0: eth0: link down
  1239. [ 1656.097192] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1240. [ 1658.110323] r8169 0000:04:00.0: eth0: link up
  1241. [ 1658.111287] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1242. [ 1674.752772] r8169 0000:04:00.0: eth0: link down
  1243. [ 1674.752833] r8169 0000:04:00.0: eth0: link down
  1244. [ 1674.753679] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1245. [ 1676.778814] r8169 0000:04:00.0: eth0: link up
  1246. [ 1676.779766] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1247. [ 2614.466172] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0008
  1248. [ 2614.466184] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00010100 CSC PPS
  1249. [ 2614.466193] hub 4-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
  1250. [ 2614.569437] hub 4-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
  1251. [ 2614.661350] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0010
  1252. [ 2614.661361] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [3] = 0x00010100 CSC PPS
  1253. [ 2614.661370] hub 4-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
  1254. [ 2614.765088] hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100
  1255. [ 2676.919558] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0002
  1256. [ 2676.919573] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001003 0  ACK POWER sig=se0 CSC CONNECT
  1257. [ 2676.919583] hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
  1258. [ 2676.944689] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001002 0  ACK POWER sig=se0 CSC
  1259. [ 2676.970642] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
  1260. [ 2677.074451] hub 2-0:1.0: debounce: port 1: total 150ms stable 100ms status 0x501
  1261. [ 2677.125357] ehci_hcd 0000:00:13.2: port 1 full speed --> companion
  1262. [ 2677.125376] ehci_hcd 0000:00:13.2: GetStatus port:1 status 003801 0  ACK POWER OWNER sig=j CONNECT
  1263. [ 2677.125383] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
  1264. [ 2677.176263] ehci_hcd 0000:00:13.2: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1265. [ 2677.176289] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0002
  1266. [ 2677.176298] ehci_hcd 0000:00:13.2: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1267. [ 2677.176306] hub 2-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
  1268. [ 2677.280060] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
  1269. [ 2677.280068] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0002
  1270. [ 2677.280076] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
  1271. [ 2677.280083] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
  1272. [ 2677.383862] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
  1273. [ 2677.445747] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  1274. [ 2677.496651] usb 5-1: new full-speed USB device number 2 using ohci_hcd
  1275. [ 2677.562609] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  1276. [ 2677.613424] usb 5-1: device descriptor read/64, error -32
  1277. [ 2677.780165] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  1278. [ 2677.831009] usb 5-1: device descriptor read/64, error -32
  1279. [ 2677.993702] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  1280. [ 2678.044603] usb 5-1: new full-speed USB device number 3 using ohci_hcd
  1281. [ 2678.110485] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  1282. [ 2678.161385] usb 5-1: device descriptor read/64, error -32
  1283. [ 2678.328069] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  1284. [ 2678.378970] usb 5-1: device descriptor read/64, error -32
  1285. [ 2678.541663] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  1286. [ 2678.592563] usb 5-1: new full-speed USB device number 4 using ohci_hcd
  1287. [ 2678.993818] usb 5-1: device not accepting address 4, error -32
  1288. [ 2679.055690] ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
  1289. [ 2679.106588] usb 5-1: new full-speed USB device number 5 using ohci_hcd
  1290. [ 2679.507840] usb 5-1: device not accepting address 5, error -32
  1291. [ 2679.507866] hub 5-0:1.0: unable to enumerate USB device on port 1
  1292. [ 2679.507873] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0002
  1293. [ 2683.114261] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
  1294. [ 2683.114274] ehci_hcd 0000:00:12.2: GetStatus port:1 status 001403 0  ACK POWER sig=k CSC CONNECT
  1295. [ 2683.114284] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
  1296. [ 2683.217751] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
  1297. [ 2683.217764] ehci_hcd 0000:00:12.2: port 1 low speed --> companion
  1298. [ 2683.268663] ehci_hcd 0000:00:12.2: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1299. [ 2683.268688] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0002
  1300. [ 2683.268697] ehci_hcd 0000:00:12.2: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
  1301. [ 2683.268705] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
  1302. [ 2683.372459] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
  1303. [ 2683.372467] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0002
  1304. [ 2683.372475] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
  1305. [ 2683.372482] hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
  1306. [ 2683.476262] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
  1307. [ 2683.538148] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  1308. [ 2683.589051] usb 4-1: new low-speed USB device number 14 using ohci_hcd
  1309. [ 2683.654941] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  1310. [ 2683.705828] usb 4-1: device descriptor read/64, error -32
  1311. [ 2683.872512] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  1312. [ 2683.923413] usb 4-1: device descriptor read/64, error -32
  1313. [ 2684.086104] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  1314. [ 2684.137007] usb 4-1: new low-speed USB device number 15 using ohci_hcd
  1315. [ 2684.202882] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  1316. [ 2684.253784] usb 4-1: device descriptor read/64, error -32
  1317. [ 2684.420468] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  1318. [ 2684.471368] usb 4-1: device descriptor read/64, error -32
  1319. [ 2684.634063] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  1320. [ 2684.684963] usb 4-1: new low-speed USB device number 16 using ohci_hcd
  1321. [ 2685.086282] usb 4-1: device not accepting address 16, error -32
  1322. [ 2685.148077] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
  1323. [ 2685.198982] usb 4-1: new low-speed USB device number 17 using ohci_hcd
  1324. [ 2685.600243] usb 4-1: device not accepting address 17, error -32
  1325. [ 2685.600269] hub 4-0:1.0: unable to enumerate USB device on port 1
  1326. [ 2685.600275] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0002
RAW Paste Data
Pastebin PRO Autumn Special!
Get 40% OFF on Pastebin PRO accounts!
Top