Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Dec 6 02:16:01 raspberrypi kernel: [ 15.517427] Adding 102396k swap on /var/swap. Priority:-1 extents:2 across:217084k SSFS
- Dec 6 02:16:03 raspberrypi kernel: [ 16.897754] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- Dec 6 02:16:03 raspberrypi kernel: [ 16.903340] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Dec 6 02:16:03 raspberrypi weewx[411]: engine: Initializing weewx version 3.6.2
- Dec 6 02:16:03 raspberrypi weewx[411]: engine: Using Python 2.7.9 (default, Sep 17 2016, 20:26:04) #012[GCC 4.9.2]
- Dec 6 02:16:03 raspberrypi weewx[411]: engine: Platform Linux-4.4.36+-armv6l-with-debian-8.0
- Dec 6 02:16:03 raspberrypi weewx[411]: engine: pid file is /var/run/weewx.pid
- Dec 6 02:16:04 raspberrypi weewx[472]: engine: Using configuration file /etc/weewx/weewx.conf
- Dec 6 02:16:04 raspberrypi weewx[472]: engine: Loading station type Vantage (weewx.drivers.vantage)
- Dec 6 02:16:04 raspberrypi kernel: [ 18.137402] random: nonblocking pool is initialized
- Dec 6 02:16:04 raspberrypi weewx[472]: engine: StdConvert target unit is 0x1
- Dec 6 02:16:04 raspberrypi weewx[472]: wxcalculate: The following values will be calculated: barometer=prefer_hardware, windchill=prefer_hardware, dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=prefer_hardware, windrun=prefer_hardware, heatindex=prefer_hardware, maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=prefer_hardware, inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, cloudbase=prefer_hardware
- Dec 6 02:16:04 raspberrypi weewx[472]: wxcalculate: The following algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
- Dec 6 02:16:04 raspberrypi weewx[472]: engine: Archive will use data binding wx_binding
- Dec 6 02:16:04 raspberrypi weewx[472]: engine: Record generation will be attempted in 'hardware'
- Dec 6 02:16:04 raspberrypi weewx[472]: engine: Using archive interval of 300 seconds (specified by hardware)
- Dec 6 02:16:04 raspberrypi kernel: [ 18.422855] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
- Dec 6 02:16:04 raspberrypi kernel: [ 18.439297] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- Dec 6 02:16:04 raspberrypi weewx[472]: engine: Using binding 'wx_binding' to database 'weewx.sdb'
- Dec 6 02:16:04 raspberrypi weewx[472]: manager: Starting backfill of daily summaries
- Dec 6 02:16:04 raspberrypi weewx[472]: manager: Daily summaries up to date
- Dec 6 02:16:05 raspberrypi weewx[472]: restx: StationRegistry: Station will not be registered: no station_url specified.
- Dec 6 02:16:05 raspberrypi weewx[472]: restx: Wunderground-RF: Data for station IQLDAYR2 will be posted
- Dec 6 02:16:05 raspberrypi weewx[472]: restx: PWSweather: Posting not enabled.
- Dec 6 02:16:05 raspberrypi weewx[472]: restx: CWOP: Posting not enabled.
- Dec 6 02:16:05 raspberrypi weewx[472]: restx: WOW: Posting not enabled.
- Dec 6 02:16:05 raspberrypi weewx[472]: restx: AWEKAS: Posting not enabled.
- Dec 6 02:16:05 raspberrypi weewx[472]: engine: Starting up weewx version 3.6.2
- Dec 6 02:16:05 raspberrypi weewx[472]: engine: Clock error is 10.64 seconds (positive is fast)
- Dec 6 02:16:05 raspberrypi weewx[472]: vantage: Clock set to 2016-12-06 02:16:06 GMT-1 (1480986966)
- Dec 6 02:16:06 raspberrypi weewx[472]: engine: Starting main packet loop.
- Dec 6 02:16:12 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:12 GMT-1 (1480986972)
- Dec 6 02:16:14 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:14 GMT-1 (1480986974)
- Dec 6 02:16:16 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:16 GMT-1 (1480986976)
- Dec 6 02:16:18 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:18 GMT-1 (1480986978)
- Dec 6 02:16:29 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:29 GMT-1 (1480986989)
- Dec 6 02:16:31 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:31 GMT-1 (1480986991)
- Dec 6 02:16:33 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:34 GMT-1 (1480986994)
- Dec 6 02:16:38 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:35 GMT-1 (1480986995)
- Dec 6 02:16:39 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:37 GMT-1 (1480986997)
- Dec 6 02:16:39 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:39 GMT-1 (1480986999)
- Dec 6 02:16:41 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:41 GMT-1 (1480987001)
- Dec 6 02:16:44 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:43 GMT-1 (1480987003)
- Dec 6 02:16:45 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:45 GMT-1 (1480987005)
- Dec 6 02:16:47 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:47 GMT-1 (1480987007)
- Dec 6 02:16:49 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:49 GMT-1 (1480987009)
- Dec 6 02:16:51 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:51 GMT-1 (1480987011)
- Dec 6 02:16:53 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:53 GMT-1 (1480987013)
- Dec 6 02:16:55 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:55 GMT-1 (1480987015)
- Dec 6 02:16:57 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:57 GMT-1 (1480987017)
- Dec 6 02:16:57 raspberrypi rsyslogd-2007: action 'action 17' suspended, next retry is Tue Dec 6 02:17:27 2016 [try http://www.rsyslog.com/e/2007 ]
- Dec 6 02:17:02 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:16:59 GMT-1 (1480987019)
- Dec 6 02:17:03 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:01 GMT-1 (1480987021)
- Dec 6 02:17:03 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:03 GMT-1 (1480987023)
- Dec 6 02:17:05 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:05 GMT-1 (1480987025)
- Dec 6 02:17:07 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:07 GMT-1 (1480987027)
- Dec 6 02:17:09 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:09 GMT-1 (1480987029)
- Dec 6 02:17:11 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:11 GMT-1 (1480987031)
- Dec 6 02:17:13 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:13 GMT-1 (1480987033)
- Dec 6 02:17:15 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:15 GMT-1 (1480987035)
- Dec 6 02:17:17 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:17 GMT-1 (1480987037)
- Dec 6 02:17:19 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:19 GMT-1 (1480987039)
- Dec 6 02:17:21 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:21 GMT-1 (1480987041)
- Dec 6 02:17:23 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:23 GMT-1 (1480987043)
- Dec 6 02:17:25 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:25 GMT-1 (1480987045)
- Dec 6 02:17:27 raspberrypi rsyslogd-2007: action 'action 17' suspended, next retry is Tue Dec 6 02:17:57 2016 [try http://www.rsyslog.com/e/2007 ]
- Dec 6 02:17:27 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:27 GMT-1 (1480987047)
- Dec 6 02:17:29 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:29 GMT-1 (1480987049)
- Dec 6 02:17:31 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:31 GMT-1 (1480987051)
- Dec 6 02:17:33 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:33 GMT-1 (1480987053)
- Dec 6 02:17:35 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:35 GMT-1 (1480987055)
- Dec 6 02:17:37 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:37 GMT-1 (1480987057)
- Dec 6 02:17:39 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:39 GMT-1 (1480987059)
- Dec 6 02:17:41 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:41 GMT-1 (1480987061)
- Dec 6 02:17:43 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:43 GMT-1 (1480987063)
- Dec 6 02:17:45 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:45 GMT-1 (1480987065)
- Dec 6 02:17:47 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:47 GMT-1 (1480987067)
- Dec 6 02:17:49 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:49 GMT-1 (1480987069)
- Dec 6 02:17:51 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:51 GMT-1 (1480987071)
- Dec 6 02:17:53 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:53 GMT-1 (1480987073)
- Dec 6 02:17:56 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:56 GMT-1 (1480987076)
- Dec 6 02:17:57 raspberrypi rsyslogd-2007: action 'action 17' suspended, next retry is Tue Dec 6 02:18:27 2016 [try http://www.rsyslog.com/e/2007 ]
- Dec 6 02:17:57 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:57 GMT-1 (1480987077)
- Dec 6 02:17:59 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:17:59 GMT-1 (1480987079)
- Dec 6 02:18:01 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:01 GMT-1 (1480987081)
- Dec 6 02:18:03 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:03 GMT-1 (1480987083)
- Dec 6 02:18:05 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:05 GMT-1 (1480987085)
- Dec 6 02:18:07 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:07 GMT-1 (1480987087)
- Dec 6 02:18:09 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:09 GMT-1 (1480987089)
- Dec 6 02:18:11 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:11 GMT-1 (1480987091)
- Dec 6 02:18:14 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:13 GMT-1 (1480987093)
- Dec 6 02:18:15 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:15 GMT-1 (1480987095)
- Dec 6 02:18:17 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:17 GMT-1 (1480987097)
- Dec 6 02:18:19 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:19 GMT-1 (1480987099)
- Dec 6 02:18:21 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:21 GMT-1 (1480987101)
- Dec 6 02:18:23 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:23 GMT-1 (1480987103)
- Dec 6 02:18:25 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:25 GMT-1 (1480987105)
- Dec 6 02:18:27 raspberrypi rsyslogd-2007: action 'action 17' suspended, next retry is Tue Dec 6 02:18:57 2016 [try http://www.rsyslog.com/e/2007 ]
- Dec 6 02:18:27 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:27 GMT-1 (1480987107)
- Dec 6 02:18:29 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:29 GMT-1 (1480987109)
- Dec 6 02:18:31 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:31 GMT-1 (1480987111)
- Dec 6 02:18:33 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:33 GMT-1 (1480987113)
- Dec 6 02:18:35 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:35 GMT-1 (1480987115)
- Dec 6 02:18:37 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:37 GMT-1 (1480987117)
- Dec 6 02:18:39 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:39 GMT-1 (1480987119)
- Dec 6 02:18:41 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:41 GMT-1 (1480987121)
- Dec 6 02:18:43 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:43 GMT-1 (1480987123)
- Dec 6 02:18:45 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:45 GMT-1 (1480987125)
- Dec 6 02:18:47 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:47 GMT-1 (1480987127)
- Dec 6 02:18:49 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:49 GMT-1 (1480987129)
- Dec 6 02:18:51 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:51 GMT-1 (1480987131)
- Dec 6 02:18:53 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:53 GMT-1 (1480987133)
- Dec 6 02:18:55 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:55 GMT-1 (1480987135)
- Dec 6 02:18:57 raspberrypi rsyslogd-2007: action 'action 17' suspended, next retry is Tue Dec 6 02:19:27 2016 [try http://www.rsyslog.com/e/2007 ]
- Dec 6 02:18:57 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:57 GMT-1 (1480987137)
- Dec 6 02:18:59 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:18:59 GMT-1 (1480987139)
- Dec 6 02:19:01 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:19:01 GMT-1 (1480987141)
- Dec 6 02:19:03 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:19:03 GMT-1 (1480987143)
- Dec 6 02:19:05 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:19:05 GMT-1 (1480987145)
- Dec 6 02:19:07 raspberrypi weewx[472]: restx: Wunderground-RF: Published record 2016-12-06 02:19:07 GMT-1 (1480987147)
- #####################################################################################################################################
- pi@raspberrypi:~ $ wee_debug --info
- Using verbosity=1, displaying most info
- wee_debug output will be sent to stdout(console)
- Using configuration file /etc/weewx/weewx.conf
- Using database binding 'wx_binding', which is bound to database 'archive_sqlite'
- System info
- CPU implementer: 0x41
- Features: half thumb fastmult vfp edsp java tls
- CPU architecture: 7
- BogoMIPS: 697.95
- Hardware: BCM2708
- CPU revision: 7
- CPU part: 0xb76
- model name: ARMv6-compatible processor rev 7 (v6l)
- Serial: 000000006d665b92
- processor: 0
- CPU variant: 0x0
- Revision: 0003
- Operating system: debian 8.0
- Linux raspberrypi 4.4.36+ #933 Fri Dec 2 21:57:25 GMT 2016 armv6l
- 1 minute load average: 0.97
- 5 minute load average: 0.41
- 15 minute load average: 0.15
- General weewx info
- Weewx version 3.6.2 detected.
- Station info
- Station type: Vantage
- Driver: weewx.drivers.vantage
- Driver info
- [Vantage]
- # This section is for the Davis Vantage series of weather stations.
- # Connection type: serial or ethernet
- # serial (the classic VantagePro)
- # ethernet (the WeatherLinkIP)
- type = serial
- # If the connection type is serial, a port must be specified:
- # Debian, Ubuntu, Redhat, Fedora, and SuSE:
- # /dev/ttyUSB0 is a common USB port name
- # /dev/ttyS0 is a common serial port name
- # BSD:
- # /dev/cuaU0 is a common serial port name
- port = /dev/ttyUSB0
- # If the connection type is ethernet, an IP Address/hostname is required:
- host = 1.2.3.4
- ######################################################
- # The rest of this section rarely needs any attention.
- # You can safely leave it "as is."
- ######################################################
- # Serial baud rate (usually 19200)
- baudrate = 19200
- # TCP port (when using the WeatherLinkIP)
- tcp_port = 22222
- # TCP send delay (when using the WeatherLinkIP):
- tcp_send_delay = 0.5
- # The id of your ISS station (usually 1). If you use a wind meter connected
- # to a anemometer transmitter kit, use its id
- iss_id = 1
- # How long to wait for a response from the station before giving up (in
- # seconds; must be greater than 2)
- timeout = 4
- # How long to wait before trying again (in seconds)
- wait_before_retry = 1.2
- # How many times to try before giving up:
- max_tries = 4
- # The driver to use:
- driver = weewx.drivers.vantage
- Currently installed extensions
- No extensions installed
- Archive info
- Database name: weewx.sdb
- Table name: archive
- Unit system: 1 (US)
- First good timestamp: 2016-11-24 17:05:00 GMT-1 (1480003500)
- Last good timestamp: 2016-12-06 02:15:00 GMT-1 (1480986900)
- Number of records: 3230
- weewx (weewx.conf) is set to use an archive interval of 300 seconds.
- The station hardware was not interrogated in determining archive interval.
- Databases configured in weewx.conf
- Database name: weewx.sdb
- Database driver: weedb.sqlite
- Database name: weewx
- Database driver: weedb.mysql
- Database host: localhost
- Parsed and obfuscated weewx.conf
- # WEEWX CONFIGURATION FILE
- #
- # Copyright (c) 2009-2015 Tom Keffer <tkeffer@gmail.com>
- # See the file LICENSE.txt for your rights.
- ##############################################################################
- # This section is for general configuration information.
- # Set to 1 for extra debug info, otherwise comment it out or set to zero
- debug = 2
- # Root directory of the weewx data file hierarchy for this station
- WEEWX_ROOT = /
- # How long to wait before timing out a socket (FTP, HTTP) connection
- socket_timeout = 20
- # Do not modify this. It is used when installing and updating weewx.
- version = 3.6.2
- ##############################################################################
- # This section is for information about the station.
- [Station]
- # Description of the station location
- location = "Ayr, Parkside, Queensland"
- # Latitude and longitude in decimal degrees
- latitude = -19.576
- longitude = 147.422
- # Altitude of the station, with unit it is in. This is downloaded from
- # from the station if the hardware supports it.
- altitude = 12, meter
- # Set to type of station hardware. There must be a corresponding stanza
- # in this file with a 'driver' parameter indicating the driver to be used.
- station_type = Vantage
- # If you have a website, you may specify an URL
- #station_url = http://www.example.com
- # The start of the rain year (1=January; 10=October, etc.). This is
- # downloaded from the station if the hardware supports it.
- rain_year_start = 1
- # Start of week (0=Monday, 6=Sunday)
- week_start = 0
- ##############################################################################
- [Vantage]
- # This section is for the Davis Vantage series of weather stations.
- # Connection type: serial or ethernet
- # serial (the classic VantagePro)
- # ethernet (the WeatherLinkIP)
- type = serial
- # If the connection type is serial, a port must be specified:
- # Debian, Ubuntu, Redhat, Fedora, and SuSE:
- # /dev/ttyUSB0 is a common USB port name
- # /dev/ttyS0 is a common serial port name
- # BSD:
- # /dev/cuaU0 is a common serial port name
- port = /dev/ttyUSB0
- # If the connection type is ethernet, an IP Address/hostname is required:
- host = 1.2.3.4
- ######################################################
- # The rest of this section rarely needs any attention.
- # You can safely leave it "as is."
- ######################################################
- # Serial baud rate (usually 19200)
- baudrate = 19200
- # TCP port (when using the WeatherLinkIP)
- tcp_port = 22222
- # TCP send delay (when using the WeatherLinkIP):
- tcp_send_delay = 0.5
- # The id of your ISS station (usually 1). If you use a wind meter connected
- # to a anemometer transmitter kit, use its id
- iss_id = 1
- # How long to wait for a response from the station before giving up (in
- # seconds; must be greater than 2)
- timeout = 4
- # How long to wait before trying again (in seconds)
- wait_before_retry = 1.2
- # How many times to try before giving up:
- max_tries = 4
- # The driver to use:
- driver = weewx.drivers.vantage
- ##############################################################################
- # This section is for uploading data to Internet sites
- [StdRESTful]
- [[StationRegistry]]
- # To register this weather station with weewx, set this to true
- register_this_station = true
- [[AWEKAS]]
- # This section is for configuring posts to AWEKAS.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a username and password.
- enable = false
- username = XXX obfuscated by wee_debug XXX
- password = XXX obfuscated by wee_debug XXX
- [[CWOP]]
- # This section is for configuring posts to CWOP.
- # If you wish to do this, set the option 'enable' to true,
- # and specify the station ID (e.g., CW1234).
- enable = false
- station = XXX obfuscated by wee_debug XXX
- # If this is an APRS (radio amateur) station, uncomment
- # the following and replace with a passcode (e.g., 12345).
- #passcode = replace_me (APRS stations only)
- [[PWSweather]]
- # This section is for configuring posts to PWSweather.com.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a station and password.
- enable = false
- station = XXX obfuscated by wee_debug XXX
- password = XXX obfuscated by wee_debug XXX
- [[WOW]]
- # This section is for configuring posts to WOW.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a station and password.
- enable = false
- station = XXX obfuscated by wee_debug XXX
- password = XXX obfuscated by wee_debug XXX
- [[Wunderground]]
- # This section is for configuring posts to the Weather Underground.
- # If you wish to do this, set the option 'enable' to true,
- # and specify a station (e.g., 'KORHOODR3') and password.
- enable = true
- station = XXX obfuscated by wee_debug XXX
- password = XXX obfuscated by wee_debug XXX
- # Set the following to True to have weewx use the WU "Rapidfire"
- # protocol. Not all hardware can support it. See the User's Guide.
- rapidfire = True
- log_success = True
- log_failure = True
- ##############################################################################
- # This section specifies what reports, using which skins, to generate.
- [StdReport]
- # Where the skins reside, relative to WEEWX_ROOT
- SKIN_ROOT = /etc/weewx/skins
- # Where the generated reports should go, relative to WEEWX_ROOT
- HTML_ROOT = /var/www/html/weewx
- # The database binding indicates which data should be used in reports.
- data_binding = wx_binding
- # Each of the following subsections defines a report that will be run.
- [[StandardReport]]
- # See the customizing guide to change the units, plot types and line
- # colors, modify the fonts, display additional sensor data, and other
- # customizations. Many of those changes can be made here by overriding
- # parameters, or by modifying templates within the skin itself.
- # The StandardReport uses the 'Standard' skin, which contains the
- # images, templates and plots for the report.
- skin = Standard
- [[[Units]]]
- [[[[Groups]]]]
- group_altitude = meter
- group_speed2 = meter_per_second2
- group_pressure = mbar
- group_rain = mm
- group_rainrate = mm_per_hour
- group_temperature = degree_C
- group_degree_day = degree_C_day
- group_speed = meter_per_second
- [[FTP]]
- # FTP'ing the results to a webserver is treated as just another report,
- # albeit one with an unusual report generator!
- skin = Ftp
- # If you wish to use FTP, uncomment and fill out the next four lines.
- #user = replace with the ftp username
- #password = replace with the ftp password
- #server = replace with the ftp server name, e.g, www.threefools.org
- #path = replace with the ftp destination directory (e.g., /weather)
- # Set to True for an FTP over TLS (FTPS) connection. Not all servers
- # support this.
- secure_ftp = False
- # To upload files from something other than what HTML_ROOT is set
- # to above, specify a different HTML_ROOT here.
- #HTML_ROOT = /var/www/html/weewx
- # Most FTP servers use port 21
- port = 21
- # Set to 1 to use passive mode, zero for active mode
- passive = 1
- [[RSYNC]]
- # rsync'ing to a webserver is treated as just another report
- skin = Rsync
- # If you wish to use rsync, you must configure passwordless ssh using
- # public/private key authentication from the user account that weewx
- # runs as to the user account on the remote machine where the files
- # will be copied.
- #
- # The following three lines determine where files will be sent.
- #server = replace with the rsync server name, e.g, www.threefools.org
- #path = replace with the rsync destination directory (e.g., /weather)
- #user = replace with the rsync username
- # Rsync can be configured to remove files from the remote server if
- # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
- # make a mistake in the remote path, you could could unintentionally
- # cause unrelated files to be deleted. Set to 1 to enable remote file
- # deletion, zero to allow files to accumulate remotely.
- delete = 0
- ##############################################################################
- # This service acts as a filter, converting the unit system coming from
- # the hardware to a unit system in the database.
- [StdConvert]
- # The target_unit affects only the unit system in the database. Once
- # chosen it cannot be changed without converting the entire database.
- # Modification of target_unit after starting weewx will result in
- # corrupt data - the database will contain a mix of US and METRIC data.
- #
- # The value of target_unit does not affect the unit system for
- # reporting - reports can display US, Metric, or any combination of units.
- #
- # In most cases, target_unit should be left as the default: US
- #
- # In particular, those migrating from a standard wview installation
- # should use US since that is what the wview database contains.
- # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
- target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
- ##############################################################################
- # This section can adjust data using calibration expressions.
- [StdCalibrate]
- [[Corrections]]
- # For each type, an arbitrary calibration expression can be given.
- # It should be in the units defined in the StdConvert section.
- # Example:
- foo = foo + 0.2
- ##############################################################################
- # This section is for quality control checks. If units are not specified,
- # values must be in the units defined in the StdConvert section.
- [StdQC]
- [[MinMax]]
- barometer = 26, 32.5, inHg
- outTemp = -40, 120, degree_F
- inTemp = 10, 120, degree_F
- outHumidity = 0, 100
- inHumidity = 0, 100
- windSpeed = 0, 120, mile_per_hour
- pressure = 24, 34.5, inHg
- ##############################################################################
- # This section controls the origin of derived values.
- [StdWXCalculate]
- [[Calculations]]
- # Derived quantities are calculated by this service. Possible values are:
- # hardware - use the value provided by hardware
- # software - use the value calculated by weewx
- # prefer_hardware - use value provide by hardware if available,
- # otherwise use value calculated by weewx
- pressure = prefer_hardware
- barometer = prefer_hardware
- altimeter = prefer_hardware
- windchill = prefer_hardware
- heatindex = prefer_hardware
- dewpoint = prefer_hardware
- inDewpoint = prefer_hardware
- rainRate = prefer_hardware
- ##############################################################################
- # For hardware that supports it, this section controls how often the
- # onboard clock gets updated.
- [StdTimeSynch]
- # How often to check the weather station clock for drift (in seconds)
- clock_check = 14400
- # How much it can drift before we will correct it (in seconds)
- max_drift = 5
- ##############################################################################
- # This section is for configuring the archive service.
- [StdArchive]
- # If the station hardware supports data logging then the archive interval
- # will be downloaded from the station. Otherwise, specify it (in seconds).
- archive_interval = 300
- # If possible, new archive records are downloaded from the station
- # hardware. If the hardware does not support this, then new archive
- # records will be generated in software.
- # Set the following to "software" to force software record generation.
- record_generation = hardware
- # Whether to include LOOP data in hi/low statistics
- loop_hilo = True
- # The data binding used to save archive records
- data_binding = wx_binding
- ##############################################################################
- # This section binds a data store to a database.
- [DataBindings]
- [[wx_binding]]
- # The database must match one of the sections in [Databases].
- # This is likely to be the only option you would want to change.
- database = archive_sqlite
- # The name of the table within the database
- table_name = archive
- # The manager handles aggregation of data for historical summaries
- manager = weewx.wxmanager.WXDaySummaryManager
- # The schema defines the structure of the database.
- # It is *only* used when the database is created.
- schema = schemas.wview.schema
- ##############################################################################
- # This section defines various databases.
- [Databases]
- # A SQLite database is simply a single file
- [[archive_sqlite]]
- database_type = SQLite
- database_name = weewx.sdb
- # MySQL
- [[archive_mysql]]
- database_type = MySQL
- database_name = weewx
- ##############################################################################
- # This section defines defaults for the different types of databases.
- [DatabaseTypes]
- # Defaults for SQLite databases
- [[SQLite]]
- driver = weedb.sqlite
- # Directory in which the database files are located
- SQLITE_ROOT = /var/lib/weewx
- # Defaults for MySQL databases
- [[MySQL]]
- driver = weedb.mysql
- # The host where the database is located
- host = localhost
- # The user name for logging in to the host
- user = XXX obfuscated by wee_debug XXX
- # The password for the user name
- password = XXX obfuscated by wee_debug XXX
- ##############################################################################
- # This section configures the internal weewx engine.
- [Engine]
- [[Services]]
- # This section specifies the services that should be run. They are
- # grouped by type, and the order of services within each group
- # determines the order in which the services will be run.
- prep_services = weewx.engine.StdTimeSynch
- data_services = ,
- process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
- archive_services = weewx.engine.StdArchive
- restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
- report_services = weewx.engine.StdPrint, weewx.engine.StdReport
- wee_debug report successfully generated
- pi@raspberrypi:~ $
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement