Guest User

s905x3 boot

a guest
Jan 26th, 2020
423
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  
  2. SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  3. bl2_stage_init 0x01
  4. bl2_stage_init 0x81
  5. hw id: 0x0000 - pwm id 0x01
  6. bl2_stage_init 0xc1
  7. bl2_stage_init 0x02
  8.  
  9. L0:00000000
  10. L1:00000703
  11. L2:00008067
  12. L3:15000020
  13. S1:00000000
  14. B2:20282000
  15. B1:a0f83180
  16.  
  17. TE: 236460
  18.  
  19. BL2 Built : 20:29:41, Jun 18 2019. g12a ga659aac - luan.yuan@droid15-sz
  20.  
  21. Board ID = 1
  22. Set cpu clk to 24M
  23. Set clk81 to 24M
  24. Use GP1_pll as DSU clk.
  25. DSU clk: 1200 Mhz
  26. CPU clk: 1200 MHz
  27. Set clk81 to 166.6M
  28. eMMC boot @ 0
  29. sw8 s
  30. DDR driver_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:37
  31. board id: 1
  32. Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  33. fw parse done
  34. Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
  35. Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
  36. PIEI prepare done
  37. fastboot data load
  38. 00000000
  39. emmc switch 1 ok
  40. ddr saved addr:00016000
  41. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  42. 00000000
  43. emmc switch 0 ok
  44. fastboot data verify
  45. verify result: 255
  46. Cfg max: 5, cur: 1. Board id: 255. Force loop cfg
  47. DDR4 probe
  48. ddr clk to 1200MHz
  49. Load ddrfw from eMMC, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
  50.  
  51. dmc_version 0001
  52. Check phy result
  53. INFO : End of initialization
  54. INFO : ERROR : Training has failed!
  55. 1D training failed
  56. Cfg max: 5, cur: 2. Board id: 255. Force loop cfg
  57. DDR3 probe
  58. ddr clk to 912MHz
  59. Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  60.  
  61. dmc_version 0001
  62. Check phy result
  63. INFO : End of initialization
  64. INFO : ERROR : Training has failed!
  65. 1D training failed
  66. Cfg max: 5, cur: 3. Board id: 255. Force loop cfg
  67. LPDDR4 probe
  68. ddr clk to 1392MHz
  69. Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  70.  
  71. dmc_version 0001
  72. Check phy result
  73. INFO : End of CA training
  74. INFO : End of initialization
  75. INFO : Training has run successfully!
  76. Check phy result
  77. INFO : End of initialization
  78. INFO : End of read enable training
  79. INFO : End of fine write leveling
  80. INFO : End of Write leveling coarse delay
  81. INFO : Training has run successfully!
  82. Check phy result
  83. INFO : End of initialization
  84. INFO : End of read dq deskew training
  85. INFO : End of MPR read delay center optimization
  86. INFO : ERROR : Training has failed!
  87. 1D training failed
  88. Cfg max: 5, cur: 4. Board id: 255. Force loop cfg
  89. LPDDR4 probe
  90. ddr clk to 1392MHz
  91. Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  92.  
  93. dmc_version 0001
  94. Check phy result
  95. INFO : End of CA training
  96. INFO : End of initialization
  97. INFO : Training has run successfully!
  98. Check phy result
  99. INFO : End of initialization
  100. INFO : End of read enable training
  101. INFO : End of fine write leveling
  102. INFO : End of Write leveling coarse delay
  103. INFO : Training has run successfully!
  104. Check phy result
  105. INFO : End of initialization
  106. INFO : End of read dq deskew training
  107. INFO : End of MPR read delay center optimization
  108. INFO : End of write delay center optimization
  109. INFO : End of read delay center optimization
  110. INFO : End of max read latency training
  111. INFO : Training has run successfully!
  112. 1D training succeed
  113. Load ddrfw from eMMC, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
  114. Check phy result
  115. INFO : End of initialization
  116. INFO : End of 2D read delay Voltage center optimization
  117. INFO : End of 2D read delay Voltage center optimization
  118. INFO : End of 2D write delay Voltage center optimization
  119. INFO : End of 2D write delay Voltage center optimization
  120. INFO : Training has run successfully!
  121.  
  122. channel==0
  123. RxClkDly_Margin_A0==100 ps 9
  124. TxDqDly_Margin_A0==78 ps 7
  125. RxClkDly_Margin_A1==0 ps 0
  126. TxDqDly_Margin_A1==0 ps 0
  127. TrainedVREFDQ_A0==79
  128. TrainedVREFDQ_A1==0
  129. VrefDac_Margin_A0==25
  130. DeviceVref_Margin_A0==35
  131. VrefDac_Margin_A1==0
  132. DeviceVref_Margin_A1==0
  133.  
  134.  
  135. channel==1
  136. RxClkDly_Margin_A0==89 ps 8
  137. TxDqDly_Margin_A0==89 ps 8
  138. RxClkDly_Margin_A1==0 ps 0
  139. TxDqDly_Margin_A1==0 ps 0
  140. TrainedVREFDQ_A0==81
  141. TrainedVREFDQ_A1==0
  142. VrefDac_Margin_A0==22
  143. DeviceVref_Margin_A0==33
  144. VrefDac_Margin_A1==0
  145. DeviceVref_Margin_A1==0
  146.  
  147. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  148.  
  149. soc_vref_reg_value 0x 0000001e 0000001e 00000020 0000001d 0000001d 0000001c 0000001e 0000001d 0000001c 0000001c 0000001b 0000001b 0000001c 0000001b 0000001a 0000001c 0000001d 0000001e 0000001d 0000001b 0000001b 0000001d 0000001f 0000001f 0000001f 0000001e 0000001f 0000001d 0000001d 0000001e 0000001f 0000001d dram_vref_reg_value 0x 00000063
  150. 2D training succeed
  151. aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:43
  152. auto size-- 65535
  153. write-error
  154. write-error
  155. write-error
  156. write-error
  157. write-error
  158. write-error
  159. write-error
  160. write-error
  161. write-error
  162. write-error
  163. write-error
  164. write-error
  165. write-error
  166. write-error
  167. write-error
  168. write-error
  169. write-error
  170. write-error
  171. write-error
  172. write-error
  173. write-error
  174. write-error
  175. write-error
  176. write-error
  177. write-error
  178. write-error
  179. write-error
  180. write-error
  181. write-errorDDR cs0 size: 3MB
  182. DDR cs1 size: 0MB
  183. DMC_DDR_CTRL: 00c0002dDDR size: 0MB
  184. DATA-W[0x00000000]:0xaaaaaaaa,R:0xaabbaaaa
  185. fail D16 20
  186. DATA-W[0x00000000]:0x55555555,R:0xaabb5555
  187. fail D17 18 19 21 22 23 24 25 26 27 28 29 30 31
  188. DATA-W[0x00000000]:0x00000001,R:0xaabb0001
  189. fail D16 17 19 20 21 23 25 27 29 31
  190. DATA-W[0x00000000]:0x00000002,R:0xaabb0002
  191. fail D16 17 19 20 21 23 25 27 29 31
  192. DATA-W[0x00000000]:0x00000004,R:0xaabb0004
  193. fail D16 17 19 20 21 23 25 27 29 31
  194. DATA-W[0x00000000]:0x00000008,R:0xaabb0008
  195. fail D16 17 19 20 21 23 25 27 29 31
  196. DATA-W[0x00000000]:0x00000010,R:0xaabb0010
  197. fail D16 17 19 20 21 23 25 27 29 31
  198. DATA-W[0x00000000]:0x00000020,R:0xaabb0020
  199. fail D16 17 19 20 21 23 25 27 29 31
  200. DATA-W[0x00000000]:0x00000040,R:0xaabb0040
  201. fail D16 17 19 20 21 23 25 27 29 31
  202. DATA-W[0x00000000]:0x00000080,R:0xaabb0080
  203. fail D16 17 19 20 21 23 25 27 29 31
  204. DATA-W[0x00000000]:0x00000100,R:0xaabb0100
  205. fail D16 17 19 20 21 23 25 27 29 31
  206. DATA-W[0x00000000]:0x00000200,R:0xaabb0200
  207. fail D16 17 19 20 21 23 25 27 29 31
  208. DATA-W[0x00000000]:0x00000400,R:0xaabb0400
  209. fail D16 17 19 20 21 23 25 27 29 31
  210. DATA-W[0x00000000]:0x00000800,R:0xaabb0800
  211. fail D16 17 19 20 21 23 25 27 29 31
  212. DATA-W[0x00000000]:0x00001000,R:0xaabb1000
  213. fail D16 17 19 20 21 23 25 27 29 31
  214. DATA-W[0x00000000]:0x00002000,R:0xaabb2000
  215. fail D16 17 19 20 21 23 25 27 29 31
  216. DATA-W[0x00000000]:0x00004000,R:0xaabb4000
  217. fail D16 17 19 20 21 23 25 27 29 31
  218. DATA-W[0x00000000]:0x00008000,R:0xaabb8000
  219. fail D16 17 19 20 21 23 25 27 29 31
  220. DATA-W[0x00000000]:0x00010000,R:0xaabb0000
  221. fail D17 19 20 21 23 25 27 29 31
  222. DATA-W[0x00000000]:0x00020000,R:0xaabb0000
  223. fail D16 19 20 21 23 25 27 29 31
  224. DATA-W[0x00000000]:0x00040000,R:0xaabb0000
  225. fail D16 17 18 19 20 21 23 25 27 29 31
  226. DATA-W[0x00000000]:0x00080000,R:0xaabb0000
  227. fail D16 17 20 21 23 25 27 29 31
  228. DATA-W[0x00000000]:0x00100000,R:0xaabb0000
  229. fail D16 17 19 21 23 25 27 29 31
  230. DATA-W[0x00000000]:0x00200000,R:0xaabb0000
  231. fail D16 17 19 20 23 25 27 29 31
  232. DATA-W[0x00000000]:0x00400000,R:0xaabb0000
  233. fail D16 17 19 20 21 22 23 25 27 29 31
  234. DATA-W[0x00000000]:0x00800000,R:0xaabb0000
  235. fail D16 17 19 20 21 25 27 29 31
  236. DATA-W[0x00000000]:0x01000000,R:0xaabb0000
  237. fail D16 17 19 20 21 23 24 25 27 29 31
  238. DATA-W[0x00000000]:0x02000000,R:0xaabb0000
  239. fail D16 17 19 20 21 23 27 29 31
  240. DATA-W[0x00000000]:0x04000000,R:0xaabb0000
  241. fail D16 17 19 20 21 23 25 26 27 29 31
  242. DATA-W[0x00000000]:0x08000000,R:0xaabb0000
  243. fail D16 17 19 20 21 23 25 29 31
  244. DATA-W[0x00000000]:0x10000000,R:0xaabb0000
  245. fail D16 17 19 20 21 23 25 27 28 29 31
  246. DATA-W[0x00000000]:0x20000000,R:0xaabb0000
  247. fail D16 17 19 20 21 23 25 27 31
  248. DATA-W[0x00000000]:0x40000000,R:0xaabb0000
  249. fail D16 17 19 20 21 23 25 27 29 30 31
  250. DATA-W[0x00000000]:0x80000000,R:0xaabb0000
  251. fail D16 17 19 20 21 23 25 27 29
  252. cs0 DataBus test failed
  253. ADDR-W[0x00000004]:0xaaaaaaaa,R:0x3283aaaa
  254. cs0 AddrBus test failed
  255. fail address pin cs 0 add 0x 00000004
  256.  
  257. non-sec scramble use zero key
  258. ddr scramble enabled
  259.  
  260. 100bdlr_step_size ps== 460
  261. result report
  262. boot times 0Enable ddr reg access
  263. 00000000
  264. emmc switch 3 ok
  265. response= 58980
  266. get rpmb counter error 0xffffffff
  267. 00000000
  268. emmc switch 0 ok
  269. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  270. FIP HDR CHK: 0xffffff7b ADDR 0x01700000
  271. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 1
  272. 00000000
  273. emmc switch 1 ok
  274. FIP HDR CHK: 0xfffffff5 ADDR 0x01700000
  275. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 2
  276. 00000000
  277. emmc switch 2 ok
  278. FIP HDR CHK: 0x0000001a ADDR 0x01700000
  279. reset...
  280. SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  281. bl2_stage_init 0x01
  282. bl2_stage_init 0x81
  283. hw id: 0x0000 - pwm id 0x01
  284. bl2_stage_init 0xc1
  285. bl2_stage_init 0x02
  286.  
  287. L0:00000000
  288. L1:00000703
  289. L2:00008067
  290. L3:15000020
  291. S1:00000000
  292. B2:20282000
  293. B1:a0f83180
  294.  
  295. TE: 236398
  296.  
  297. BL2 Built : 20:29:41, Jun 18 2019. g12a ga659aac - luan.yuan@droid15-sz
  298.  
  299. Board ID = 1
  300. Set cpu clk to 24M
  301. Set clk81 to 24M
  302. Use GP1_pll as DSU clk.
  303. DSU clk: 1200 Mhz
  304. CPU clk: 1200 MHz
  305. Set clk81 to 166.6M
  306. eMMC boot @ 0
  307. sw8 s
  308. DDR driver_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:37
  309. board id: 1
  310. Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  311. fw parse done
  312. Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
  313. Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
  314. PIEI prepare done
  315. fastboot data load
  316. 00000000
  317. emmc switch 1 ok
  318. ddr saved addr:00016000
  319. Load ddr parameter from eMMC, src: 0x02c00000, des: 0xfffd0000, size: 0x00001000, part: 0
  320. 00000000
  321. emmc switch 0 ok
  322. fastboot data verify
  323. verify result: 255
  324. Cfg max: 5, cur: 1. Board id: 255. Force loop cfg
  325. DDR4 probe
  326. ddr clk to 1200MHz
  327. Load ddrfw from eMMC, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
  328.  
  329. dmc_version 0001
  330. Check phy result
  331. INFO : End of initialization
  332. INFO : ERROR : Training has failed!
  333. 1D training failed
  334. Cfg max: 5, cur: 2. Board id: 255. Force loop cfg
  335. DDR3 probe
  336. ddr clk to 912MHz
  337. Load ddrfw from eMMC, src: 0x0002c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  338.  
  339. dmc_version 0001
  340. Check phy result
  341. INFO : End of initialization
  342. INFO : ERROR : Training has failed!
  343. 1D training failed
  344. Cfg max: 5, cur: 3. Board id: 255. Force loop cfg
  345. LPDDR4 probe
  346. ddr clk to 1392MHz
  347. Load ddrfw from eMMC, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
  348.  
  349. dmc_version 0001
  350. Check phy result
  351. INFO : End of CA training
  352. INFO : End of initialization
  353. INFO : Training has run successfully!
  354. Check phy result
  355. INFO : End of initialization
  356. INFO : End of read enable training
  357. INFO : End of fine write leveling
  358. INFO : End of Write leveling coarse delay
  359. INFO : Training has run successfully!
  360. Check phy result
  361. INFO : End of initialization
  362. INFO : End of read dq deskew training
  363. INFO : End of MPR read delay center optimization
  364. INFO : End of write delay center optimization
  365. INFO : End of read delay center optimization
  366. INFO : End of max read latency training
  367. INFO : Training has run successfully!
  368. 1D training succeed
  369. Load ddrfw from eMMC, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
  370. Check phy result
  371. INFO : End of initialization
  372. INFO : End of 2D read delay Voltage center optimization
  373. INFO : End of 2D read delay Voltage center optimization
  374. INFO : End of 2D write delay Voltage center optimization
  375. INFO : End of 2D write delay Voltage center optimization
  376. INFO : Training has run successfully!
  377.  
  378. channel==0
  379. RxClkDly_Margin_A0==100 ps 9
  380. TxDqDly_Margin_A0==89 ps 8
  381. RxClkDly_Margin_A1==100 ps 9
  382. TxDqDly_Margin_A1==89 ps 8
  383. TrainedVREFDQ_A0==81
  384. TrainedVREFDQ_A1==78
  385. VrefDac_Margin_A0==24
  386. DeviceVref_Margin_A0==33
  387. VrefDac_Margin_A1==24
  388. DeviceVref_Margin_A1==36
  389.  
  390.  
  391. channel==1
  392. RxClkDly_Margin_A0==89 ps 8
  393. TxDqDly_Margin_A0==100 ps 9
  394. RxClkDly_Margin_A1==89 ps 8
  395. TxDqDly_Margin_A1==78 ps 7
  396. TrainedVREFDQ_A0==81
  397. TrainedVREFDQ_A1==80
  398. VrefDac_Margin_A0==24
  399. DeviceVref_Margin_A0==33
  400. VrefDac_Margin_A1==22
  401. DeviceVref_Margin_A1==34
  402.  
  403. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  404.  
  405. soc_vref_reg_value 0x 0000001d 0000001d 0000001f 0000001d 0000001c 0000001b 0000001d 0000001d 0000001b 0000001a 0000001b 0000001b 0000001b 0000001b 0000001a 0000001b 0000001c 0000001d 0000001c 0000001a 0000001a 0000001d 0000001e 0000001e 0000001e 0000001d 0000001e 0000001c 0000001c 0000001d 0000001e 0000001b dram_vref_reg_value 0x 00000062
  406. 2D training succeed
  407. aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_15 build time: Jun 18 2019 20:29:43
  408. auto size-- 65535DDR cs0 size: 1024MB
  409. DDR cs1 size: 1024MB
  410. DMC_DDR_CTRL: 00e0001bDDR size: 2048MB
  411. cs0 DataBus test pass
  412. cs1 DataBus test pass
  413. cs0 AddrBus test pass
  414. cs1 AddrBus test pass
  415.  
  416. non-sec scramble use zero key
  417. ddr scramble enabled
  418.  
  419. 100bdlr_step_size ps== 454
  420. result report
  421. boot times 1Enable ddr reg access
  422. 00000000
  423. emmc switch 3 ok
  424. BL2: rpmb counter: 0x00000039
  425. 00000000
  426. emmc switch 0 ok
  427. Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  428. Load BL3X from eMMC, src: 0x00078200, des: 0x01768000, size: 0x00108000, part: 0
  429. bl2z: ptr: 05129330, size: 00001e40
  430. 0.0;M3 CHK:0;cm4_sp_mode 0
  431. MVN_1=0x00000000
  432. MVN_2=0x00000000
  433. [Image: g12a_v1.1.3389-92241b5 2019-07-02 17:22:49 luan.yuan@droid15-sz]
  434. OPS=0x10
  435. ring efuse init
  436. 2b 0c 10 00 01 05 0c 00 00 0c 38 31 53 4b 50 50
  437. [0.017319 Inits done]
  438. secure task start!
  439. high task start!
  440. low task start!
  441. run into bl31
  442. NOTICE: BL31: v1.3(release):4fc40b1
  443. NOTICE: BL31: Built : 15:57:33, May 22 2019
  444. NOTICE: BL31: G12A normal boot!
  445. NOTICE: BL31: BL33 decompress pass
  446. INFO: BL3-2: ATOS-V2.4.2-13-gc341bc0 #1 Thu Jun 27 19:33:34 2019 +0800 arm
  447. INFO: BL3-2: Chip: SM1 Rev: C (2B:C - 10:2)
  448. INFO: BL3-2: crypto engine DMA
  449. INFO: BL3-2: secure time TEE
  450. INFO: BL3-2: CONFIG_DEVICE_SECURE 0xb200000e
  451.  
  452.  
  453. U-Boot 2015.01 (Jan 03 2020 - 16:24:37)
  454.  
  455. DRAM: 2 GiB
  456. Relocation Offset is: 76e5f000
  457. spi_post_bind(spifc): req_seq = 0
  458. register usb cfg[0][1] = 0000000077f3f330
  459. NAND: get_sys_clk_rate_mtd() 290, clock setting 200!
  460. NAND device id: 0 ff ff ff ff ff
  461. No NAND device found!!!
  462. nand init failed: -6
  463. get_sys_clk_rate_mtd() 290, clock setting 200!
  464. NAND device id: 0 ff ff ff ff ff
  465. No NAND device found!!!
  466. nand init failed: -6
  467. MMC: aml_priv->desc_buf = 0x0000000073e4fa70
  468. aml_priv->desc_buf = 0x0000000073e51db0
  469. SDIO Port B: 0, SDIO Port C: 1
  470. co-phase 0x2, tx-dly 0, clock 400000
  471. co-phase 0x2, tx-dly 0, clock 400000
  472. co-phase 0x2, tx-dly 0, clock 400000
  473. emmc/sd response timeout, cmd8, status=0x1ff2800
  474. emmc/sd response timeout, cmd55, status=0x1ff2800
  475. co-phase 0x2, tx-dly 0, clock 400000
  476. co-phase 0x2, tx-dly 0, clock 40000000
  477. aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x162000
  478. [mmc_startup] mmc refix success
  479. init_part() 297: PART_TYPE_AML
  480. [mmc_init] mmc init success
  481. Amlogic multi-dtb tool
  482. GZIP format, decompress...
  483. Multi dtb detected
  484. Multi dtb tool version: v2 .
  485. Support 4 dtbs.
  486. aml_dt soc: sm1 platform: ac213 variant: 2g
  487. dtb 0 soc: g12a plat: u212 vari: 2g
  488. dtb 1 soc: g12a plat: u212 vari: 4g
  489. dtb 2 soc: sm1 plat: ac213 vari: 2g
  490. dtb 3 soc: sm1 plat: ac213 vari: 4g
  491. Find match dtb: 2
  492. start dts,buffer=0000000073e54620,dt_addr=0000000073e54620
  493. get_partition_from_dts() 91: ret 0
  494. Amlogic multi-dtb tool
  495. Single dtb detected
  496. parts: 17
  497. 00: logo 0000000000800000 1
  498. 01: recovery 0000000001800000 1
  499. 02: misc 0000000000800000 1
  500. 03: dtbo 0000000000800000 1
  501. 04: cri_data 0000000000800000 2
  502. 05: param 0000000001000000 2
  503. 06: boot 0000000001000000 1
  504. set has_boot_slot = 0
  505. 07: rsv 0000000001000000 1
  506. 08: metadata 0000000001000000 1
  507. 09: vbmeta 0000000000200000 1
  508. 10: tee 0000000002000000 1
  509. 11: vendor 0000000020000000 1
  510. 12: odm 0000000008000000 1
  511. 13: system 0000000074000000 1
  512. 14: product 0000000008000000 1
  513. 15: cache 0000000046000000 2
  514. 16: data ffffffffffffffff 4
  515. init_part() 297: PART_TYPE_AML
  516. eMMC/TSD partition table have been checked OK!
  517. crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
  518. crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
  519. crc32_s:0x79f50f07 == storage crc_pattern:0x79f50f07!!!
  520. mmc env offset: 0x4d400000
  521. In: serial
  522. Out: serial
  523. Err: serial
  524. reboot_mode=cold_boot
  525. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  526. _verify_dtb_checksum()-3406: calc b9f39d09, store b9f39d09
  527. _verify_dtb_checksum()-3406: calc b9f39d09, store b9f39d09
  528. dtb_read()-3623: total valid 2
  529. update_old_dtb()-3604: do nothing
  530. Amlogic multi-dtb tool
  531. GZIP format, decompress...
  532. Multi dtb detected
  533. Multi dtb tool version: v2 .
  534. Support 4 dtbs.
  535. aml_dt soc: sm1 platform: ac213 variant: 2g
  536. dtb 0 soc: g12a plat: u212 vari: 2g
  537. dtb 1 soc: g12a plat: u212 vari: 4g
  538. dtb 2 soc: sm1 plat: ac213 vari: 2g
  539. dtb 3 soc: sm1 plat: ac213 vari: 4g
  540. Find match dtb: 2
  541. amlkey_init() enter!
  542. [EFUSE_MSG]keynum is 4
  543. vpu: clk_level in dts: 7
  544. vpu: vpu_power_on
  545. vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
  546. vpu: vpu_module_init_config
  547. vpp: vpp_init
  548. vpp: vpp osd2 matrix rgb2yuv..............
  549. cvbs: cpuid:0x2b
  550. Net: dwmac.ff3f0000amlkey_init() enter!
  551. amlkey_init() 71: already init!
  552. [EFUSE_MSG]keynum is 4
  553. MACADDR:02:00:00:0c:05:01(from chipid)
  554.  
  555. CONFIG_AVB2: null
  556. Start read misc partition datas!
  557. info->magic =
  558. info->version_major = 1
  559. info->version_minor = 0
  560. info->slots[0].priority = 15
  561. info->slots[0].tries_remaining = 7
  562. info->slots[0].successful_boot = 0
  563. info->slots[1].priority = 14
  564. info->slots[1].tries_remaining = 7
  565. info->slots[1].successful_boot = 0
  566. info->crc32 = -1075449479
  567. active slot = 0
  568. wipe_data=successful
  569. wipe_cache=successful
  570. upgrade_step=2
  571. reboot_mode:::: cold_boot
  572. amlkey_init() enter!
  573. amlkey_init() 71: already init!
  574. [EFUSE_MSG]keynum is 4
  575. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  576. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  577. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  578. hpd_state=0
  579. edid preferred_mode is <NULL>[0]
  580. hdr mode is 0
  581. dv mode is ver:0 len: 0
  582. hdr10+ mode is 0
  583. [OSD]load fb addr from dts:/meson-fb
  584. [OSD]load fb addr from dts:/fb
  585. [OSD]set initrd_high: 0x7f800000
  586. [OSD]fb_addr for logo: 0x7f800000
  587. [OSD]load fb addr from dts:/meson-fb
  588. [OSD]load fb addr from dts:/fb
  589. [OSD]fb_addr for logo: 0x7f800000
  590. [OSD]VPP_OFIFO_SIZE:0xfff01fff
  591. [CANVAS]canvas init
  592. [CANVAS]addr=0x7f800000 width=3840, height=2160
  593. [OSD]osd_hw.free_dst_data: 0,719,0,575
  594. [OSD]osd1_update_disp_freescale_enable
  595. vpp: vpp_matrix_update: 2
  596. cvbs performance type = 9, table = 0
  597. cvbs_config_hdmipll_g12a
  598. cvbs_set_vid2_clk
  599. vpp: sdr_mode = 2
  600. vpp: Rx hdr_info.hdr_sup_eotf_smpte_st_2084 = 0
  601. amlkey_init() enter!
  602. amlkey_init() 71: already init!
  603. [EFUSE_MSG]keynum is 4
  604. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  605. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  606. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  607. gpio: pin GPIOAO_3 (gpio 3) value is 1
  608. Command: bcb uboot-command
  609. Start read misc partition datas!
  610. BCB hasn't any datas,exit!
  611. amlkey_init() enter!
  612. amlkey_init() 71: already init!
  613. [EFUSE_MSG]keynum is 4
  614. [KM]Error:f[key_manage_query_size]L515:key[usid] not programed yet
  615. [KM]Error:f[key_manage_query_size]L515:key[mac] not programed yet
  616. [KM]Error:f[key_manage_query_size]L515:key[deviceid] not programed yet
  617. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  618. Unknown command 'ddr_auto_fast_boot_check' - try 'help'
  619. pll tsensor avg: 0x1dc2, u_efuse: 0x8067
  620. temp1: 19
  621. ddr tsensor avg: 0x1da7, u_efuse: 0x8001
  622. temp2: 20
  623. device cool done
  624. CONFIG_SYSTEM_AS_ROOT: systemroot
  625. system_mode: 1
  626. Start read misc partition datas!
  627. info->magic =
  628. info->version_major = 1
  629. info->version_minor = 0
  630. info->slots[0].priority = 15
  631. info->slots[0].tries_remaining = 7
  632. info->slots[0].successful_boot = 0
  633. info->slots[1].priority = 14
  634. info->slots[1].tries_remaining = 7
  635. info->slots[1].successful_boot = 0
  636. info->crc32 = -1075449479
  637. active slot = 0
  638. CONFIG_AVB2: null
  639. active_slot: normal
  640. avb2: 0
  641. ee_gate_off ...
  642. avb2: 0
  643. ## Booting Android Image at 0x01080000 ...
  644. Kernel command line: androidboot.dtbo_idx=0 vmalloc=512m --cmdline root=/dev/mmcblk0p18 buildvariant=user
  645. Start read misc partition datas!
  646. info->magic =
  647. info->version_major = 1
  648. info->version_minor = 0
  649. info->slots[0].priority = 15
  650. info->slots[0].tries_remaining = 7
  651. info->slots[0].successful_boot = 0
  652. info->slots[1].priority = 14
  653. info->slots[1].tries_remaining = 7
  654. info->slots[1].successful_boot = 0
  655. info->crc32 = -1075449479
  656. active slot = 0
  657. active_slot is normal
  658. load dtb from 0x1000000 ......
  659. Amlogic multi-dtb tool
  660. Single dtb detected
  661. find 1 dtbos
  662. dtbos to be applied: 0
  663. Apply dtbo 0
  664. Loading Kernel Image(COMP_NONE) ... OK
  665. kernel loaded at 0x01080000, end = 0x019bc820
  666. libfdt fdt_getprop(): FDT_ERR_NOTFOUND
  667. Loading Device Tree to 0000000009fe7000, end 0000000009fff6aa ... OK
  668.  
  669. Starting kernel ...
  670.  
  671. uboot time: 3598095 us
  672. [ 0.000000@0] Booting Linux on physical CPU 0x0
  673. [ 0.000000@0] Linux version 4.9.113 (superceleron@superserver) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Fri Jan 3 16:51:12 WET 2020
  674. [ 0.000000@0] CPU: ARMv7 Processor [411fd050] revision 0 (ARMv7), cr=10c5383d
  675. [ 0.000000@0] CPU: div instructions available: patching division code
  676. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  677. [ 0.000000@0] OF: fdt:Machine model: Amlogic
  678. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x05000000, size 36 MiB
  679. [ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
  680. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x7f800000, size 8 MiB
  681. [ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
  682. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x77800000, size 128 MiB
  683. [ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
  684. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x75000000, size 40 MiB
  685. [ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
  686. [ 0.000000@0] Reserved memory: regions without no-map are not yet supported
  687. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x61c00000, size 308 MiB
  688. [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
  689. [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
  690. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x5dc00000, size 64 MiB
  691. [ 0.000000@0] OF: reserved mem: initialized node linux,vdin1_cma, compatible id shared-dma-pool
  692. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x5bc00000, size 32 MiB
  693. [ 0.000000@0] OF: reserved mem: initialized node linux,vm0_cma, compatible id shared-dma-pool
  694. [ 0.000000@0] cma: Reserved 8 MiB at 0x5b400000
  695. [ 0.000000@0] Memory policy: Data cache writealloc
  696. [ 0.000000@0] psci: probing for conduit method from DT.
  697. [ 0.000000@0] psci: PSCIv1.0 detected in firmware.
  698. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
  699. [ 0.000000@0] psci: Trusted OS migration not required
  700. [ 0.000000@0] psci: SMC Calling Convention v1.1
  701. [ 0.000000@0] percpu: Embedded 15 pages/cpu @de770000 s32140 r8192 d21108 u61440
  702. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523280
  703. [ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=0 reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=576cvbs,enable panel_type=lcd_1 hdmitx=,444,8bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.serialno=1234567890 ro rootwait skip_initramfs androidboot.dtbo_idx=0 vmalloc=512m --cmdline root=/dev/mmcblk0p18 buildvariant=user
  704. [ 0.000000@0] fb: osd0
  705. [ 0.000000@0] fb: loaded
  706. [ 0.000000@0] fb: 0x3d800000
  707. [ 0.000000@0] vout: 576cvbs
  708. [ 0.000000@0] vout: enable: 1
  709. [ 0.000000@0] lcd: panel_type: lcd_1
  710. [ 0.000000@0] vout: get hdmimode: 1080p60hz
  711. [ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1
  712. [ 0.000000@0] vout: get cvbsmode: 576cvbs
  713. [ 0.000000@0] vpp_axis_reverse: bootargs is 0
  714. [ 0.000000@0] phlock_phase_config: bootargs is 0.
  715. [ 0.000000@0] jtag: jtag select disable
  716. [ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)
  717. [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  718. [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  719. [ 0.000000@0] Memory: 1415580K/2097152K available (14336K kernel code, 1269K rwdata, 4880K rodata, 1024K init, 1342K bss, 42596K reserved, 638976K cma-reserved, 978944K highmem)
  720. [ 0.000000@0] Virtual kernel memory layout:
  721. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  722. [ 0.000000@0] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  723. [ 0.000000@0] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
  724. [ 0.000000@0] lowmem : 0xc0000000 - 0xdf800000 ( 504 MB)
  725. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  726. [ 0.000000@0] modules : 0xbc000000 - 0xbfe00000 ( 62 MB)
  727. [ 0.000000@0] .text : 0xc0108000 - 0xc1000000 (15328 kB)
  728. [ 0.000000@0] .init : 0xc1600000 - 0xc1700000 (1024 kB)
  729. [ 0.000000@0] .data : 0xc1700000 - 0xc183d6f8 (1270 kB)
  730. [ 0.000000@0] .bss : 0xc183f000 - 0xc198ebc4 (1343 kB)
  731. [ 0.000000@0] zone:Normal, spaned pages:129024, total:129024
  732. [ 0.000000@0] zone:HighMem, spaned pages:395264, total:524288
  733. [ 0.000000@0] page_trace_pre_work, trace buffer:de000000, size:200000, used:de200000, end:de200000
  734. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  735. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  736. [ 0.000000@0] Build-time adjustment of leaf fanout to 32.
  737. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  738. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
  739. [ 0.000000@0] NR_IRQS:16 nr_irqs:16 16
  740. [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  741. [ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
  742. [ 0.000000@0] Meson chip version = RevC (2B:C - 10:0)
  743. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  744. [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  745. [ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
  746. [ 0.000000@0] meson_g12a_media_init: register meson media clk
  747. [ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
  748. [ 0.000000@0] meson_g12a_misc_init: done.
  749. [ 0.000000@0] g12a_clkc_init initialization complete
  750. [ 0.000000@0] sm1 clk probe ok
  751. [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
  752. [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  753. [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  754. [ 0.000014@0] Switching to timer-based delay loop, resolution 41ns
  755. [ 0.000048@0] meson_bc_timer: mclk->mux_reg =e000c190,mclk->reg =e000e194
  756. [ 0.000647@0] Console: colour dummy device 80x30
  757. [ 0.000667@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  758. [ 0.000679@0] pid_max: default: 32768 minimum: 301
  759. [ 0.000741@0] thread_stack_cache_init, vmap:de223900, bitmap:de228400, cache page:5b000
  760. [ 0.000751@0] thread_stack_cache_init, allocation vm area:de225040, addr:bc000000, size:3001000
  761. [ 0.000794@0] Security Framework initialized
  762. [ 0.000804@0] SELinux: Initializing.
  763. [ 0.000874@0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  764. [ 0.000887@0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  765. [ 0.001522@0] CPU: Testing write buffer coherency: ok
  766. [ 0.001555@0] ftrace: allocating 44133 entries in 130 pages
  767. [ 0.074912@0] sched-energy: CPU device node has no sched-energy-costs
  768. [ 0.074930@0] CPU0: update cpu_capacity 1024
  769. [ 0.074937@0] CPU0: thread 0, cpu 0, socket 0, mpidr 81000000
  770. [ 0.074966@0] Setting up static identity map for 0x200000 - 0x200058
  771. [ 0.118771@0] secmon: can't fine clear_range
  772. [ 0.167624@1] CPU1: update cpu_capacity 1024
  773. [ 0.167629@1] CPU1: thread 0, cpu 1, socket 0, mpidr 81000100
  774. [ 0.199707@2] CPU2: update cpu_capacity 1024
  775. [ 0.199711@2] CPU2: thread 0, cpu 2, socket 0, mpidr 81000200
  776. [ 0.231822@3] CPU3: update cpu_capacity 1024
  777. [ 0.231826@3] CPU3: thread 0, cpu 3, socket 0, mpidr 81000300
  778. [ 0.231922@0] Brought up 4 CPUs
  779. [ 0.231948@0] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  780. [ 0.231953@0] CPU: All CPU(s) started in SVC mode.
  781. [ 0.232571@0] addr:bc045cce is in kernel, size fix 4096->10, data:mode=0755
  782. [ 0.232689@0] devtmpfs: initialized
  783. [ 0.257824@0] VFP support v0.3: implementor 41 architecture 3 part 40 variant 5 rev 2
  784. [ 0.258322@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  785. [ 0.258344@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  786. [ 0.258516@0] pinctrl core: initialized pinctrl subsystem
  787. [ 0.259670@0] NET: Registered protocol family 16
  788. [ 0.262558@0] DMA: preallocated 256 KiB pool for atomic coherent allocations
  789. [ 0.262566@0] schedtune: init normalization constants...
  790. [ 0.262572@0] schedtune: no energy model data
  791. [ 0.262577@0] schedtune: disabled!
  792. [ 0.275503@0] cpuidle: using governor menu
  793. [ 0.275603@0] register canvas platform driver
  794. [ 0.275647@0] register rdma platform driver
  795. [ 0.275693@0] aml_vdac_init: module init
  796. [ 0.278559@0] clkmsr: clkmsr: driver init
  797. [ 0.278568@0] codec_mm_module_init
  798. [ 0.278615@0] media_configs_system_init
  799. [ 0.279095@0] pstore: using zlib compression
  800. [ 0.279658@0] console [pstore-1] enabled
  801. [ 0.279693@0] pstore: Registered ramoops as persistent store backend
  802. [ 0.279703@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
  803. [ 0.279712@0] ramoops: ramoops_io_en:0 1 old:0x0 ftrace_size:0x40000
  804. [ 0.281736@0] aml_iomap: amlogic iomap probe done
  805. [ 0.282311@0] vpu: driver version: v20190314(10-sm1)
  806. [ 0.282324@0] vpu: load vpu_clk: 666666667Hz(7)
  807. [ 0.282525@0] vpu: clktree_init
  808. [ 0.282595@0] vpu: vpu_probe OK
  809. [ 0.286863@0] clkmsr: msr_clk_reg0=e01c0004,msr_clk_reg2=e01c200c
  810. [ 0.286882@0] clkmsr: msr_ring_reg0=e01c45fc
  811. [ 0.293382@0] aml_vdac_probe:probe start.cpu_id:8,name:meson-sm1-vdac
  812. [ 0.293592@0] aml_vdac_probe: ok
  813. [ 0.293763@0] canvas_probe reg=ff638000,size=2000
  814. [ 0.293787@0] canvas maped reg_base =e01c6000
  815. [ 0.302291@0] rdma_probe,cpu_type:1, ver:0, len:8
  816. [ 0.302511@0] rdma_register, rdma_table_addr e01e9000 rdma_table_addr_phy 5b440000 reg_buf dda18000
  817. [ 0.302521@0] rdma_register success, handle 1 table_size 32768
  818. [ 0.302529@0] set_rdma_handle video rdma handle = 1.
  819. [ 0.303831@0] aml_snd_reg_map[0], reg:ff661000, size:400
  820. [ 0.303851@0] aml_snd_reg_map[1], reg:ff660000, size:1000
  821. [ 0.303868@0] aml_snd_reg_map[2], reg:ff661400, size:400
  822. [ 0.303885@0] aml_snd_reg_map[3], reg:ff662000, size:1000
  823. [ 0.303900@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
  824. [ 0.303927@0] aml_snd_reg_map[5], reg:ff661800, size:400
  825. [ 0.303943@0] aml_snd_reg_map[6], reg:ff663800, size:30
  826. [ 0.303959@0] aml_snd_reg_map[7], reg:ff663c00, size:20
  827. [ 0.303976@0] aml_snd_reg_map[8], reg:ff663e00, size:10
  828. [ 0.303984@0] amlogic auge_snd_iomap probe done
  829. [ 0.306260@0] cvbs_out: cvbsout_probe, cpu_id:7,name:meson-sm1-cvbsout
  830. [ 0.306282@0] cvbs_out: clk path:0
  831. [ 0.306291@0] cvbs_out: error: failed to get vdac_config
  832. [ 0.306437@0] vout: vout1: register server: cvbs_vout_server
  833. [ 0.306446@0] cvbs_out: register cvbs module server ok
  834. [ 0.306454@0] vout: vout2: register server: cvbs_vout2_server
  835. [ 0.306461@0] cvbs_out: register cvbs module vout2 server ok
  836. [ 0.306471@0] cvbs_out: chrdev devno 264241152 for disp
  837. [ 0.306682@0] cvbs_out: create cdev cvbs
  838. [ 0.306692@0] cvbs_out: cvbsout_probe OK
  839. [ 0.307333@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  840. [ 0.307430@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  841. [ 0.307439@0] codec_mm_probe ok
  842. [ 0.558314@0] vgaarb: loaded
  843. [ 0.558623@0] SCSI subsystem initialized
  844. [ 0.558936@0] usbcore: registered new interface driver usbfs
  845. [ 0.559021@0] usbcore: registered new interface driver hub
  846. [ 0.559129@0] usbcore: registered new device driver usb
  847. [ 0.559343@0] Linux video capture interface: v2.00
  848. [ 0.559488@0] pps_core: LinuxPPS API ver. 1 registered
  849. [ 0.559498@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  850. [ 0.559535@0] PTP clock support registered
  851. [ 0.560331@0] secmon: reserve_mem_size:0x2300000
  852. [ 0.560422@0] secmon secmon: assigned reserved memory node linux,secmon
  853. [ 0.561913@0] secmon: get page:de887000, 5000
  854. [ 0.561928@0] secmon: share in base: 0xc50fe000, share out base: 0xc50ff000
  855. [ 0.561936@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
  856. [ 0.562464@0] fb: osd_init_module
  857. [ 0.562940@0] fb: viu vsync irq: 57
  858. [ 0.562960@0] fb: viu2 vsync irq: 65
  859. [ 0.563071@0] 0x000000d8:Y=d8,U=0,V=0
  860. [ 0.563080@0] 0x000000d9:Y=d9,U=0,V=0
  861. [ 0.563088@0] 0x000000da:Y=da,U=0,V=0
  862. [ 0.563095@0] 0x000000db:Y=db,U=0,V=0
  863. [ 0.563102@0] 0x000000dc:Y=dc,U=0,V=0
  864. [ 0.563110@0] 0x000000dd:Y=dd,U=0,V=0
  865. [ 0.563482@0] fb: osd_rdma_init: rdma_table p=0x5b448000,op=0x5b448000 , v=0xe02d3000
  866. [ 0.563524@0] rdma_register, rdma_table_addr e02d5000 rdma_table_addr_phy 5b449000 reg_buf ddbae000
  867. [ 0.563533@0] rdma_register success, handle 2 table_size 4096
  868. [ 0.563540@0] fb: osd_rdma_init:osd rdma handle = 2.
  869. [ 0.563557@0] fb: mem_size: 0x800000
  870. [ 0.563564@0] fb: mem_size: 0x1980000
  871. [ 0.563571@0] fb: mem_size: 0x100000
  872. [ 0.563577@0] fb: mem_size: 0x100000
  873. [ 0.563584@0] fb: mem_size: 0x800000
  874. [ 0.563638@0] meson-fb fb: assigned reserved memory node linux,meson-fb
  875. [ 0.563648@0] fb: reserved memory base:0x7f800000, size:800000
  876. [ 0.564038@0] vout: error: invalid vinfo1. current vmode is not supported
  877. [ 0.564050@0] fb: init fbdev bpp is:32
  878. [ 0.565660@0] fb: set osd0 reverse as NONE
  879. [ 0.565679@0] vout: error: invalid vinfo1. current vmode is not supported
  880. [ 0.573062@0] fb: osd probe OK
  881. [ 0.573799@0] hdmitx: system: amhdmitx_probe start
  882. [ 0.573809@0] hdmitx: system: Ver: 20190624
  883. [ 0.573841@0] hdmitx: system: hdmitx_device.chip_type : 12
  884. [ 0.573877@0] hdmitx: system: not find match pwr-ctl
  885. [ 0.573917@0] hdmitx: system: not find drm_amhdmitx
  886. [ 0.573942@0] hdmitx: system: hpd irq = 50
  887. [ 0.574043@0] hdmitx: system: hdcp22_tx_skp failed to probe
  888. [ 0.574053@0] hdmitx: system: hdcp22_tx_esm failed to probe
  889. [ 0.574569@0] vout: vout1: register server: hdmitx_vout_server
  890. [ 0.574581@0] vout: vout2: register server: hdmitx_vout2_server
  891. [ 0.575300@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  892. [ 0.575321@0] hdmitx: hdmitx20: Mapped PHY: 0xff634400
  893. [ 0.575340@0] hdmitx: hdmitx20: Mapped PHY: 0xff900000
  894. [ 0.575354@0] hdmitx: hdmitx20: Mapped PHY: 0xff800000
  895. [ 0.575365@0] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
  896. [ 0.575374@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  897. [ 0.575382@0] hdmitx: hdmitx20: Mapped PHY: 0xff608000
  898. [ 0.575391@0] hdmitx: hdmitx20: Mapped PHY: 0xff600000
  899. [ 0.575401@0] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
  900. [ 0.575415@0] hdmitx: hw: hdmitx_get_format:0x0
  901. [ 0.575422@0] hdmitx: hw: P_HHI_HDMI_CLK_CNTL :0x100
  902. [ 0.575429@0] hdmitx: hw: P_HHI_HDMI_PLL_CNTL :0xda0504f7
  903. [ 0.575659@0] hdmitx: hw: avmute set to 1
  904. [ 0.575669@0] hdmitx: system: fmt_attr 444,8bit
  905. [ 0.575772@0] hdmitx: system: amhdmitx_probe end
  906. [ 0.576464@0] lcd: driver version: 20181012(8-sm1)
  907. [ 0.576603@0] lcd: detect mode: tablet, fr_auto_policy: 0, key_valid: 0
  908. [ 0.576828@0] lcd: lcd_clktree_probe
  909. [ 0.576838@0] lcd: status: 0
  910. [ 0.576847@0] vout: vout1: register server: lcd_vout_server
  911. [ 0.576857@0] vout: vout2: register server: lcd_vout2_server
  912. [ 0.576866@0] lcd: lcd_get_config from dts
  913. [ 0.576880@0] lcd: no range_setting
  914. [ 0.576927@0] lcd: P070ACB_FT, mipi, 8bit, 600x1024
  915. [ 0.576944@0] lcd: pixel_clk = 49.434MHz, bit_rate = 395.472MHz
  916. [ 0.577275@0] lcd: lcd_fops_create OK
  917. [ 0.577288@0] vout: error: invalid vinfo1. current vmode is not supported
  918. [ 0.577296@0] fb: current vmode=invalid, cmd: 0x20000
  919. [ 0.577317@0] lcd: request lcd_vsync_irq successful
  920. [ 0.577332@0] lcd: request lcd_vsync2_irq successful
  921. [ 0.577340@0] lcd: lcd_probe ok
  922. [ 0.577695@0] vout: create vout attribute OK
  923. [ 0.577840@0] vout: vout_fops_create OK
  924. [ 0.577850@0] vout: vout1: register server: nulldisp_vout_server
  925. [ 0.577975@0] vout: tvout monitor interval:500(ms), timeout cnt:20
  926. [ 0.578008@0] cvbs_out: mode is 1,sync_duration_den=1,sync_duration_num=50
  927. [ 0.578034@0] cvbs_out: vdac open.0 = 0x8f6001, 0x0
  928. [ 0.578043@0]
  929. [ 0.578043@0] vdac_enable: on:1,module_sel:8
  930. [ 0.578055@0] cvbs_out: already display in uboot
  931. [ 0.578062@0] vout: init mode 576cvbs set ok
  932. [ 0.578069@0] vout: aml_tvout_mode_monitor
  933. [ 0.578086@0] vout: aml_vout_probe OK
  934. [ 0.578740@0] chip type:0x2b
  935. [ 0.579097@0] NO valid ramdump args:0 0
  936. [ 0.581079@3] Advanced Linux Sound Architecture Driver Initialized.
  937. [ 0.581949@3] Bluetooth: Core ver 2.22
  938. [ 0.582041@3] NET: Registered protocol family 31
  939. [ 0.582052@3] Bluetooth: HCI device and connection manager initialized
  940. [ 0.582072@3] Bluetooth: HCI socket layer initialized
  941. [ 0.582087@3] Bluetooth: L2CAP socket layer initialized
  942. [ 0.582126@3] Bluetooth: SCO socket layer initialized
  943. [ 0.582753@3] NetLabel: Initializing
  944. [ 0.582769@3] NetLabel: domain hash size = 128
  945. [ 0.582777@3] NetLabel: protocols = UNLABELED CIPSOv4
  946. [ 0.582837@3] NetLabel: unlabeled traffic allowed by default
  947. [ 0.586220@3] clocksource: Switched to clocksource arch_sys_counter
  948. [ 0.656545@3] VFS: Disk quotas dquot_6.6.0
  949. [ 0.656625@3] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  950. [ 0.666879@0] clear:18800000, free:18800000, tick:85460 us
  951. [ 0.670108@1] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
  952. [ 0.670124@1] jtag: module init
  953. [ 0.670442@1] jtag: ao gpios not specified
  954. [ 0.670462@1] jtag: probe of jtag failed with error -22
  955. [ 0.670748@1] NET: Registered protocol family 2
  956. [ 0.671336@1] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  957. [ 0.671375@1] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  958. [ 0.671419@1] TCP: Hash tables configured (established 4096 bind 4096)
  959. [ 0.671478@1] UDP hash table entries: 256 (order: 1, 8192 bytes)
  960. [ 0.671501@1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  961. [ 0.671631@1] NET: Registered protocol family 1
  962. [ 0.673407@1] wifi: power_on_pin_OD = 0;
  963. [ 0.673423@1] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
  964. [ 0.673517@1] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
  965. [ 0.673537@1] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
  966. [ 0.673548@1] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
  967. [ 0.673556@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
  968. [ 0.674299@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
  969. [ 0.674313@1] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
  970. [ 0.674322@1] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
  971. [ 0.674331@1] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
  972. [ 0.674340@1] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
  973. [ 0.674553@1] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
  974. [ 0.674642@1] aml_wifi wifi: [wifi_setup_dt] irq num is:(83)
  975. [ 0.674653@1] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
  976. [ 0.674675@1] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
  977. [ 0.677421@1] enable_pmuserenr_all() start
  978. [ 0.677438@1] enable_pmuserenr_all() end
  979. [ 0.677454@1] hw perfevents: clusterb_enabled = 0
  980. [ 0.677463@1] hw perfevents: cpumasks 0xf, 0x0
  981. [ 0.677489@1] hw perfevents: cluster A irq = 25
  982. [ 0.677565@1] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  983. [ 0.680984@1] audit: initializing netlink subsys (disabled)
  984. [ 0.681054@1] audit: type=2000 audit(0.632:1): initialized
  985. [ 0.681941@1] workingset: timestamp_bits=30 max_order=19 bucket_order=0
  986. [ 0.691162@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  987. [ 0.691472@1] exFAT: Version 1.2.9
  988. [ 0.692732@1] Registering sdcardfs 0.1
  989. [ 0.692974@1] ntfs: driver 2.1.32 [Flags: R/O].
  990. [ 0.693317@1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  991. [ 0.694166@1] fuse init (API version 7.26)
  992. [ 0.700065@1] NET: Registered protocol family 38
  993. [ 0.700086@1] Key type asymmetric registered
  994. [ 0.700095@1] Asymmetric key parser 'x509' registered
  995. [ 0.700265@1] bounce: pool size: 64 pages
  996. [ 0.700499@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
  997. [ 0.700512@1] io scheduler noop registered (default)
  998. [ 0.700521@1] io scheduler deadline registered
  999. [ 0.700551@1] io scheduler cfq registered
  1000. [ 0.711730@2] random: fast init done
  1001. [ 0.711783@2] random: crng init done
  1002. [ 0.723177@1] brd: module loaded
  1003. [ 0.729561@1] loop: module loaded
  1004. [ 0.730387@1] zram: Added device: zram0
  1005. [ 0.730762@1] mtdoops: mtd device (mtddev=name/number) must be supplied
  1006. [ 0.731651@1] libphy: Fixed MDIO Bus: probed
  1007. [ 0.731984@1] tun: Universal TUN/TAP device driver, 1.6
  1008. [ 0.731993@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1009. [ 0.732871@1] REG0:Addr = e069c540
  1010. [ 0.732890@1] auto_cali_idx 0
  1011. [ 0.733367@1] meson6-dwmac ff3f0000.ethernet: no reset control found
  1012. [ 0.733379@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
  1013. [ 0.733387@1] Ring mode enabled
  1014. [ 0.733394@1] DMA HW capability register supported
  1015. [ 0.733402@1] Normal descriptors
  1016. [ 0.733409@1] RX Checksum Offload Engine supported
  1017. [ 0.733415@1] COE Type 2
  1018. [ 0.733422@1] TX Checksum insertion supported
  1019. [ 0.733428@1] Wake-Up On Lan supported
  1020. [ 0.733492@1] Enable RX Mitigation via HW Watchdog Timer
  1021. [ 0.736205@1] libphy: stmmac: probed
  1022. [ 0.736216@1] eth%d: No PHY found
  1023. [ 0.759467@1] ethclk81 ff3f0000.ethernet: no reset control found
  1024. [ 0.759484@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
  1025. [ 0.759492@1] Ring mode enabled
  1026. [ 0.759499@1] DMA HW capability register supported
  1027. [ 0.759507@1] Normal descriptors
  1028. [ 0.759513@1] RX Checksum Offload Engine supported
  1029. [ 0.759520@1] COE Type 2
  1030. [ 0.759527@1] TX Checksum insertion supported
  1031. [ 0.759533@1] Wake-Up On Lan supported
  1032. [ 0.759540@1] Enable RX Mitigation via HW Watchdog Timer
  1033. [ 0.762237@1] libphy: stmmac: probed
  1034. [ 0.762247@1] eth%d: No PHY found
  1035. [ 0.782534@1] PPP generic driver version 2.4.2
  1036. [ 0.782759@1] PPP BSD Compression module registered
  1037. [ 0.782768@1] PPP Deflate Compression module registered
  1038. [ 0.782792@1] PPP MPPE Compression module registered
  1039. [ 0.782801@1] NET: Registered protocol family 24
  1040. [ 0.782898@1] usbcore: registered new interface driver asix
  1041. [ 0.782998@1] usbcore: registered new interface driver ax88179_178a
  1042. [ 0.783079@1] usbcore: registered new interface driver cdc_ether
  1043. [ 0.783142@1] usbcore: registered new interface driver net1080
  1044. [ 0.783201@1] usbcore: registered new interface driver cdc_subset
  1045. [ 0.783260@1] usbcore: registered new interface driver zaurus
  1046. [ 0.783339@1] usbcore: registered new interface driver cdc_ncm
  1047. [ 0.783937@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1048. [ 0.783948@1] ehci-pci: EHCI PCI platform driver
  1049. [ 0.784036@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1050. [ 0.784065@1] ohci-pci: OHCI PCI platform driver
  1051. [ 0.784649@1] usbcore: registered new interface driver cdc_acm
  1052. [ 0.784658@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  1053. [ 0.784732@1] usbcore: registered new interface driver usb-storage
  1054. [ 0.784845@1] usbcore: registered new interface driver usbserial
  1055. [ 0.785254@1] mousedev: PS/2 mouse device common for all mice
  1056. [ 0.785525@1] usbcore: registered new interface driver xpad
  1057. [ 0.785715@1] i2c /dev entries driver
  1058. [ 0.785919@1] IR NEC protocol handler initialized
  1059. [ 0.785928@1] IR RC5(x/sz) protocol handler initialized
  1060. [ 0.785936@1] IR RC6 protocol handler initialized
  1061. [ 0.785943@1] IR JVC protocol handler initialized
  1062. [ 0.785949@1] IR Sony protocol handler initialized
  1063. [ 0.785957@1] IR SANYO protocol handler initialized
  1064. [ 0.785963@1] IR Sharp protocol handler initialized
  1065. [ 0.785970@1] IR MCE Keyboard/mouse protocol handler initialized
  1066. [ 0.785977@1] IR XMP protocol handler initialized
  1067. [ 0.786064@1] usbcore: registered new interface driver uvcvideo
  1068. [ 0.786073@1] USB Video Class driver (1.1.1)
  1069. [ 0.786148@1] usbcore: registered new interface driver cx231xx
  1070. [ 0.786160@1] md: linear personality registered for level -1
  1071. [ 0.786778@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  1072. [ 0.786958@1] device-mapper: verity-avb: AVB error handler initialized with vbmeta device:
  1073. [ 0.787017@1] Bluetooth: HCI UART driver ver 2.3
  1074. [ 0.787028@1] Bluetooth: HCI UART protocol H4 registered
  1075. [ 0.787308@1] cpuidle: enable-method property 'psci' found operations
  1076. [ 0.787433@1] cpuidle: enable-method property 'psci' found operations
  1077. [ 0.787568@1] cpuidle: enable-method property 'psci' found operations
  1078. [ 0.787697@1] cpuidle: enable-method property 'psci' found operations
  1079. [ 0.788997@1] ledtrig-cpu: registered to indicate activity on CPUs
  1080. [ 0.789397@1] hidraw: raw HID events driver (C) Jiri Kosina
  1081. [ 0.793571@1] usbcore: registered new interface driver usbhid
  1082. [ 0.793587@1] usbhid: USB HID core driver
  1083. [ 0.793802@1] ashmem: initialized
  1084. [ 0.795036@1] value of voltage_tolerance 0
  1085. [ 0.796165@1] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
  1086. [ 0.796833@1] meson_cpufreq_probe: Registered platform drive
  1087. [ 0.797019@1] ff803000.serial: clock gate not found
  1088. [ 0.797070@1] meson_uart ff803000.serial: ==uart0 reg addr = e06b1000
  1089. [ 0.797117@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 34, base_baud = 1500000) is a meson_uart
  1090. [ 0.797132@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
  1091. [ 3.077115@1] console [ttyS0] enabled
  1092. [ 3.081525@1] meson_uart ffd24000.serial: ==uart1 reg addr = e06b3000
  1093. [ 3.087194@1] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 49, base_baud = 1500000) is a meson_uart
  1094. [ 3.097718@1] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xe06b5000
  1095. [ 3.107237@1] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xe06bd080
  1096. [ 3.118671@1] Error: Driver 'meson_reset' is already registered, aborting...
  1097. [ 3.124339@1] aml_dma ff63e000.aml_dma: Aml dma
  1098. [ 3.129305@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
  1099. [ 3.135043@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
  1100. [ 3.141744@1] meson-remote: Driver init
  1101. [ 3.145390@1] meson-remote: remote_probe
  1102. [ 3.149133@1] meson-remote ff808040.rc: protocol = 0x1
  1103. [ 3.154239@1] meson-remote ff808040.rc: led_blink = 1
  1104. [ 3.159259@1] meson-remote ff808040.rc: led_blink_frq = 100
  1105. [ 3.164916@1] meson-remote ff808040.rc: platform_data irq =48
  1106. [ 3.170655@1] meson-remote ff808040.rc: custom_number = 3
  1107. [ 3.176009@1] meson-remote ff808040.rc: ptable->map_size = 50
  1108. [ 3.181707@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1
  1109. [ 3.188901@1] meson-remote ff808040.rc: ptable->custom_code = 0xfb04
  1110. [ 3.195228@1] meson-remote ff808040.rc: ptable->release_delay = 80
  1111. [ 3.201405@1] meson-remote ff808040.rc: ptable->map_size = 53
  1112. [ 3.207099@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2
  1113. [ 3.214291@1] meson-remote ff808040.rc: ptable->custom_code = 0xfe01
  1114. [ 3.220618@1] meson-remote ff808040.rc: ptable->release_delay = 80
  1115. [ 3.226789@1] meson-remote ff808040.rc: ptable->map_size = 17
  1116. [ 3.232492@1] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3
  1117. [ 3.239685@1] meson-remote ff808040.rc: ptable->custom_code = 0xbd02
  1118. [ 3.246011@1] meson-remote ff808040.rc: ptable->release_delay = 80
  1119. [ 3.252169@1] meson-remote ff808040.rc: default protocol = 0x1 and id = 0
  1120. [ 3.258928@1] meson-remote ff808040.rc: reg=0x0, val=0x1f40190
  1121. [ 3.264730@1] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8
  1122. [ 3.270538@1] meson-remote ff808040.rc: reg=0x8, val=0x960050
  1123. [ 3.276257@1] meson-remote ff808040.rc: reg=0xc, val=0x480028
  1124. [ 3.281977@1] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013
  1125. [ 3.287958@1] meson-remote ff808040.rc: reg=0x18, val=0x8616800
  1126. [ 3.293850@1] meson-remote ff808040.rc: reg=0x1c, val=0x9f00
  1127. [ 3.299484@1] meson-remote ff808040.rc: reg=0x20, val=0x0
  1128. [ 3.304857@1] meson-remote ff808040.rc: reg=0x24, val=0x0
  1129. [ 3.310232@1] meson-remote ff808040.rc: reg=0x28, val=0x0
  1130. [ 3.316049@1] input: aml_keypad as /devices/platform/ff808040.rc/input/input0
  1131. [ 3.323158@1] meson-remote: IR XMP protocol handler initialized
  1132. [ 3.331264@1] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
  1133. [ 3.336269@1] ge2d: ge2d_init_module
  1134. [ 3.339587@1] ge2d: ge2d_dev major:235
  1135. [ 3.343434@1] ge2d: clock source clk_ge2d_gate dd5bebc0
  1136. [ 3.348315@1] ge2d: clock clk_ge2d source dd5bec40
  1137. [ 3.353059@1] ge2d: clock source clk_vapb_0 dd5becc0
  1138. [ 3.357986@1] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
  1139. [ 3.365261@1] ge2d: ge2d clock is 499 MHZ
  1140. [ 3.369181@1] ge2d: find address resource
  1141. [ 3.373160@1] ge2d: map io source 0xff940000,size=65536 to 0xe0810000
  1142. [ 3.379575@1] ge2d: reserved mem init failed
  1143. [ 3.383812@1] ge2d: ge2d: pdev=dd9c1e00, irq=56, clk=dd5bebc0
  1144. [ 3.389564@1] ge2d: ge2d start monitor
  1145. [ 3.393344@2] ge2d: ge2d workqueue monitor start
  1146. [ 3.393726@1] [tsync_pcr_init]init success.
  1147. [ 3.393923@1] amvideom vsync irq: 57
  1148. [ 3.394556@1] hdmitx: hdcp: hdmitx_hdcp_init
  1149. [ 3.395077@1] vout: vout2: create vout2 attribute OK
  1150. [ 3.395196@1] vout: vout2: vout2_fops_create OK
  1151. [ 3.395347@1] vout: vout2: clktree_init
  1152. [ 3.395350@1] vout: vout2: register server: nulldisp_vout2_server
  1153. [ 3.395444@1] vout: vout2: init mode null set ok
  1154. [ 3.395446@1] vout: vout2: aml_vout2_probe OK
  1155. [ 3.395573@1] DI: di_module_init ok.
  1156. [ 3.395577@1] DI: di_module_init: major 509
  1157. [ 3.395924@1] deinterlace deinterlace: assigned reserved memory node linux,di_cma
  1158. [ 3.395928@1] di:flag_cma=1
  1159. [ 3.395931@1] DI: CMA size 0x2800000.
  1160. [ 3.395947@1] pre_irq:73
  1161. [ 3.395953@1] post_irq:74
  1162. [ 3.395955@1] DI: di_probe allocate rdma channel 0.
  1163. [ 3.395959@1] di_get_vpu_clkb: get clk vpu error.
  1164. [ 3.395962@1] DI: vpu clkb <334000000, 667000000>
  1165. [ 3.395994@1] get clkb rate:333333328
  1166. [ 3.396000@1] DI:enable vpu clkb.
  1167. [ 3.396009@1] 0x000000de:Y=de,U=0,V=0
  1168. [ 3.396011@1] 0x000000df:Y=df,U=0,V=0
  1169. [ 3.396012@1] 0x000000e0:Y=e0,U=0,V=0
  1170. [ 3.396014@1] 0x000000e1:Y=e1,U=0,V=0
  1171. [ 3.396015@1] 0x000000e2:Y=e2,U=0,V=0
  1172. [ 3.396016@1] 0x000000e3:Y=e3,U=0,V=0
  1173. [ 3.396018@1] 0x000000f0:Y=f0,U=0,V=0
  1174. [ 3.396019@1] 0x000000f1:Y=f1,U=0,V=0
  1175. [ 3.396020@1] 0x000000f2:Y=f2,U=0,V=0
  1176. [ 3.396022@1] 0x000000f3:Y=f3,U=0,V=0
  1177. [ 3.396026@1] 0x000000f4:Y=f4,U=0,V=0
  1178. [ 3.396027@1] 0x000000f5:Y=f5,U=0,V=0
  1179. [ 3.396028@1] 0x000000f6:Y=f6,U=0,V=0
  1180. [ 3.396029@1] 0x000000f7:Y=f7,U=0,V=0
  1181. [ 3.396031@1] 0x000000f8:Y=f8,U=0,V=0
  1182. [ 3.396032@1] 0x000000f9:Y=f9,U=0,V=0
  1183. [ 3.396036@1] 0x000000fa:Y=fa,U=0,V=0
  1184. [ 3.396037@1] 0x000000fb:Y=fb,U=0,V=0
  1185. [ 3.396038@1] 0x000000fc:Y=fc,U=0,V=0
  1186. [ 3.396040@1] 0x000000fd:Y=fd,U=0,V=0
  1187. [ 3.396041@1] 0x000000fe:Y=fe,U=0,V=0
  1188. [ 3.396042@1] 0x000000ff:Y=ff,U=0,V=0
  1189. [ 3.396045@1] 0x0000003a:Y=3a,U=0,V=0
  1190. [ 3.396046@1] 0x0000003b:Y=3b,U=0,V=0
  1191. [ 3.396047@1] 0x0000003c:Y=3c,U=0,V=0
  1192. [ 3.396049@1] DI: support multi decoding 58~59~60.
  1193. [ 3.396201@1] DI: di_probe:Di use HRTIMER
  1194. [ 3.396319@1] di_probe:ok
  1195. [ 3.396410@1] vdin_drv_init: major 508
  1196. [ 3.397907@1] rdma_register, rdma_table_addr e080d000 rdma_table_addr_phy 5b44a000 reg_buf dd5cd200
  1197. [ 3.397912@1] rdma_register success, handle 3 table_size 512
  1198. [ 3.397915@1] vdin_drv_probe:vdin.0 rdma hanld 3.
  1199. [ 3.398067@1]
  1200. [ 3.398067@1] vdin memory resource undefined!!
  1201. [ 3.398070@1] vdin0 cma_mem_size = 8 MB
  1202. [ 3.398074@1] vdin0 irq: 54 rdma irq: 2
  1203. [ 3.398076@1] set_canvas_manual = 0
  1204. [ 3.398078@1] no urgent_en found
  1205. [ 3.398103@1] get fclk_div5 err
  1206. [ 3.398106@1] vdin_drv_probe: vdin cannot get msr clk !!!
  1207. [ 3.398129@1] vdin_drv_probe: driver initialized ok
  1208. [ 3.398232@1] rdma_register, rdma_table_addr e0821000 rdma_table_addr_phy 5b44b000 reg_buf dd5cd600
  1209. [ 3.398234@1] rdma_register success, handle 4 table_size 512
  1210. [ 3.398236@1] vdin_drv_probe:vdin.1 rdma hanld 4.
  1211. [ 3.398430@1] vdin vdin1: assigned reserved memory node linux,vdin1_cma
  1212. [ 3.398431@1]
  1213. [ 3.398431@1] vdin memory resource done.
  1214. [ 3.398434@1] vdin1 cma_mem_size = 64 MB
  1215. [ 3.398437@1] vdin1 irq: 55 rdma irq: 4
  1216. [ 3.398439@1] set_canvas_manual = 0
  1217. [ 3.398440@1] no urgent_en found
  1218. [ 3.398465@1] get fclk_div5 err
  1219. [ 3.398467@1] vdin_drv_probe: vdin cannot get msr clk !!!
  1220. [ 3.398475@1] vdin_debugfs_init only support debug vdin0 1
  1221. [ 3.398476@1] vdin_drv_probe: driver initialized ok
  1222. [ 3.398591@1] vdin_drv_init: vdin driver init done
  1223. [ 3.398594@1] [viuin..]viuin_init_module viuin module init
  1224. [ 3.398819@1] [viuin..]viuin_probe probe ok.
  1225. [ 3.399313@1] [RX]-hdmirx: hdmirx_init.
  1226. [ 3.399316@1] ESM HLD: Initializing...
  1227. [ 3.399430@1] tvin_afe: tvafe_drv_init: major 506
  1228. [ 3.399727@1] tvin_afe: tvafe_drv_init.
  1229. [ 3.399877@1] tvafe_vbi: vbi: vbi_init.
  1230. [ 3.400044@1] amvdec_csi module: init.
  1231. [ 3.400049@1] amvdec_csi_init_module:major 504
  1232. [ 3.400185@1] amvdec_csi module: init. ok
  1233. [ 3.400189@1] amlvid:info: amlvideo_init called
  1234. [ 3.400190@1] amlvid:info: amlvideo_create_instance called
  1235. [ 3.400192@1] amlvid:info: v4l2_dev.name=:amlvideo-000
  1236. [ 3.400344@1] amlvideo-000: V4L2 device registered as video10
  1237. [ 3.400346@1] amlvid:info: amlvideo_create_instance called
  1238. [ 3.400357@1] amlvid:info: v4l2_dev.name=:amlvideo-001
  1239. [ 3.400480@1] amlvideo-001: V4L2 device registered as video23
  1240. [ 3.400618@1] PPMGRDRV: warn: ppmgr module init func called
  1241. [ 3.400733@1] PPMGRDRV: err: ppmgr_driver_probe called
  1242. [ 3.400797@1] PPMGRDRV: info: ppmgr_dev major:503
  1243. [ 3.400984@1] ppmgr: probe of ppmgr failed with error -22
  1244. [ 3.402363@1] ionvideo-000: V4L2 device registered as video13
  1245. [ 3.402483@1] ionvideo-001: V4L2 device registered as video14
  1246. [ 3.402603@1] ionvideo-002: V4L2 device registered as video15
  1247. [ 3.402706@1] ionvideo-003: V4L2 device registered as video16
  1248. [ 3.402820@1] ionvideo-004: V4L2 device registered as video17
  1249. [ 3.402926@1] ionvideo-005: V4L2 device registered as video18
  1250. [ 3.403030@1] ionvideo-006: V4L2 device registered as video19
  1251. [ 3.403144@1] ionvideo-007: V4L2 device registered as video20
  1252. [ 3.403259@1] ionvideo-008: V4L2 device registered as video21
  1253. [ 3.403261@1] ionvid: info: Video Technology Magazine Ion Video
  1254. [ 3.403262@1] ionvid: info: Capture Board ver 1.0 successfully loaded
  1255. [ 3.403490@1] picdec: picdec_driver_probe called.
  1256. [ 3.403699@1] picdec: probe of picdec failed with error -22
  1257. [ 3.403896@1] videosync_create_instance dev_s dd5e6a00,dev_s->dev dd5ef640
  1258. [ 3.403899@1] videosync_create_instance reg videosync.0
  1259. [ 3.403975@1] aml_vecm_init:module init
  1260. [ 3.403977@3] videosync_thread started
  1261. [ 3.404159@1]
  1262. [ 3.404159@1] VECM probe start
  1263. [ 3.404402@1] vlock_status_init vlock_en:0
  1264. [ 3.404424@1] Can't find wb_sel.
  1265. [ 3.404426@1] hdr:Can't find cfg_en_osd_100.
  1266. [ 3.404431@1] amlogic, vecm
  1267. [ 3.404431@1] vlock dt support: 1
  1268. [ 3.404433@1] vlock dt new_fsm: 0
  1269. [ 3.404434@1] vlock dt hwver: 0
  1270. [ 3.404435@1] vlock dt phlock_en: 0
  1271. [ 3.404437@1] Can't find vlock_en.
  1272. [ 3.404438@1] Can't find vlock_mode.
  1273. [ 3.404439@1] Can't find vlock_pll_m_limit.
  1274. [ 3.404441@1] Can't find vlock_line_limit.
  1275. [ 3.404467@1] param_config vlock_en:0
  1276. [ 3.404470@1] aml_vecm_probe: ok
  1277. [ 3.404516@1] amdolby_vision_init:module init
  1278. [ 3.404779@1]
  1279. [ 3.404779@1] amdolby_vision probe start & ver: 20181220
  1280. [ 3.404785@1]
  1281. [ 3.404785@1] cpu_id=2 tvmode=1
  1282. [ 3.404912@1] dolby_vision_init_receiver(dvel)
  1283. [ 3.404916@1] dolby_vision_init_receiver: dvel
  1284. [ 3.405050@1] amdolby_vision_probe: ok
  1285. [ 3.405104@1] prime_sl module init
  1286. [ 3.405470@1] vm_init .
  1287. [ 3.406355@1] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
  1288. [ 3.407255@1] meson-mmc: >>>>>>>>hostbase e083c000, dmode
  1289. [ 3.407494@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1290. [ 3.407496@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  1291. [ 3.646038@1] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
  1292. [ 3.646042@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1293. [ 3.646044@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  1294. [ 3.646048@1] meson-mmc: Data 1 aligned delay is 0
  1295. [ 3.646051@1] meson-mmc: emmc: clk 199999997 tuning start
  1296. [ 3.648593@1] meson-mmc: emmc: rx_tuning_result[0] = 40
  1297. [ 3.649846@1] meson-mmc: emmc: rx_tuning_result[1] = 40
  1298. [ 3.649880@1] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  1299. [ 3.651136@1] meson-mmc: emmc: rx_tuning_result[3] = 40
  1300. [ 3.652387@1] meson-mmc: emmc: rx_tuning_result[4] = 40
  1301. [ 3.652389@1] meson-mmc: emmc: best_win_start =3, best_win_size =4
  1302. [ 3.652392@1] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x2000
  1303. [ 3.652508@1] emmc: new HS200 MMC card at address 0001
  1304. [ 3.653003@1] emmc: clock 199999997, 8-bit-bus-width
  1305. [ 3.653003@1]
  1306. [ 3.653004@1] mmcblk0: emmc:0001 BJNB4R 29.1 GiB
  1307. [ 3.653197@1] mmcblk0boot0: emmc:0001 BJNB4R partition 1 4.00 MiB
  1308. [ 3.653370@1] mmcblk0boot1: emmc:0001 BJNB4R partition 2 4.00 MiB
  1309. [ 3.653558@1] mmcblk0rpmb: emmc:0001 BJNB4R partition 3 4.00 MiB
  1310. [ 3.654440@1] meson-mmc: Enter aml_emmc_partition_ops
  1311. [ 3.654833@1] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
  1312. [ 3.654834@1] meson-mmc: add_emmc_partition
  1313. [ 3.654997@1] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  1314. [ 3.655118@1] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  1315. [ 3.655238@1] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000
  1316. [ 3.655366@1] meson-mmc: [mmcblk0p04] env offset 0x00004d400000, size 0x000000800000
  1317. [ 3.655486@1] meson-mmc: [mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000
  1318. [ 3.655625@1] meson-mmc: [mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000
  1319. [ 3.655746@1] meson-mmc: [mmcblk0p07] misc offset 0x000051400000, size 0x000000800000
  1320. [ 3.655881@1] meson-mmc: [mmcblk0p08] dtbo offset 0x000052400000, size 0x000000800000
  1321. [ 3.656013@1] meson-mmc: [mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000
  1322. [ 3.656135@1] meson-mmc: [mmcblk0p10] param offset 0x000054400000, size 0x000001000000
  1323. [ 3.656291@1] meson-mmc: [mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000
  1324. [ 3.656466@1] meson-mmc: [mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000
  1325. [ 3.656599@1] meson-mmc: [mmcblk0p13] metadata offset 0x000058c00000, size 0x000001000000
  1326. [ 3.656729@1] meson-mmc: [mmcblk0p14] vbmeta offset 0x00005a400000, size 0x000000200000
  1327. [ 3.656851@1] meson-mmc: [mmcblk0p15] tee offset 0x00005ae00000, size 0x000002000000
  1328. [ 3.656981@1] meson-mmc: [mmcblk0p16] vendor offset 0x00005d600000, size 0x000020000000
  1329. [ 3.657115@1] meson-mmc: [mmcblk0p17] odm offset 0x00007de00000, size 0x000008000000
  1330. [ 3.657243@1] meson-mmc: [mmcblk0p18] system offset 0x000086600000, size 0x000074000000
  1331. [ 3.657357@1] meson-mmc: [mmcblk0p19] product offset 0x0000fae00000, size 0x000008000000
  1332. [ 3.657476@1] meson-mmc: [mmcblk0p20] data offset 0x000103600000, size 0x000644600000
  1333. [ 3.657490@1] card key: card_blk_probe.
  1334. [ 3.657495@1] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
  1335. [ 3.657497@1] emmc key: emmc_key_init:205 ok.
  1336. [ 3.659405@1] meson-mmc: amlmmc_dtb_init: register dtb chardev
  1337. [ 3.659405@1] meson-mmc: calc b9f39d09, store b9f39d09
  1338. [ 3.661185@1] meson-mmc: calc b9f39d09, store b9f39d09
  1339. [ 3.661187@1] meson-mmc: total valid 2
  1340. [ 3.661425@1] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
  1341. [ 3.661426@1] meson-mmc: Exit aml_emmc_partition_ops OK.
  1342. [ 11.338221@0] vout: aml_tvout_mode_work: monitor_timeout
RAW Paste Data