Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000@0] Booting Linux on physical CPU 0x200
- <6>[ 0.000000@0] Initializing cgroup subsys cpu
- <6>[ 0.000000@0] Initializing cgroup subsys cpuacct
- <5>[ 0.000000@0] Linux version 3.10.33-gf53a6fa-dirty (alan@Audrey) (gcc version 4.7.3 20130205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.02-01-20130221 - Linaro GCC 2013.02) ) #12 SMP PREEMPT Tue Dec 15 10:34:29 CET 2015
- <4>[ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
- <4>[ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <6>[ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC
- <4>[ 0.000000@0] physical memory start address is 0x200000
- <6>[ 0.000000@0] reserved_end is 1f2fffff
- <6>[ 0.000000@0]
- <6>[ 0.000000@0] Total memory is 2046 MiB
- <6>[ 0.000000@0] Reserved low memory from 0x06000000 to 0x1f2fffff, size: 403 MiB
- <6>[ 0.000000@0] mesonfb0(low) : 0x09100000 - 0x0a900000 ( 24 MiB)
- <6>[ 0.000000@0] mesonfb1(low) : 0x0a900000 - 0x0aa00000 ( 1 MiB)
- <6>[ 0.000000@0] deinterlace0(high) : 0x7e800000 - 0x80000000 ( 24 MiB)
- <6>[ 0.000000@0] mesonstream0(low) : 0x0aa00000 - 0x0ca00000 ( 32 MiB)
- <6>[ 0.000000@0] vdec0(low) : 0x0ca00000 - 0x1ca00000 (256 MiB)
- <6>[ 0.000000@0] ppmgr0(high) : 0x7c800000 - 0x7e800000 ( 32 MiB)
- <6>[ 0.000000@0] vdin00(low) : 0x1ca00000 - 0x1cb00000 ( 1 MiB)
- <6>[ 0.000000@0] vdin10(low) : 0x1cb00000 - 0x1db00000 ( 16 MiB)
- <6>[ 0.000000@0] amlvideo20(low) : 0x1db00000 - 0x1f300000 ( 24 MiB)
- <4>[ 0.000000@0] get storage device: storage 1
- <4>[ 0.000000@0] value=1
- <4>[ 0.000000@0] get_storage_device : get storage device: storage 1
- <4>[ 0.000000@0] get_storage_device : value=1
- <4>[ 0.000000@0] [get_storage_device] storage_flag=1
- <4>[ 0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=1
- <6>[ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000
- <6>[ 0.000000@0] cma: Found region@0, memory base 0, size 36 MiB
- <6>[ 0.000000@0] cma: CMA: reserved 36 MiB at 2cc00000
- <4>[ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
- <7>[ 0.000000@0] On node 0 totalpages: 402688
- <7>[ 0.000000@0] free_area_init_node: node 0, pgdat c0bda880, node_mem_map c0eb6000
- <7>[ 0.000000@0] Normal zone: 1520 pages used for memmap
- <7>[ 0.000000@0] Normal zone: 0 pages reserved
- <7>[ 0.000000@0] Normal zone: 87808 pages, LIFO batch:15
- <7>[ 0.000000@0] HighMem zone: 2460 pages used for memmap
- <7>[ 0.000000@0] HighMem zone: 314880 pages, LIFO batch:31
- <6>[ 0.000000@0] Meson chip version = RevA (1D:A - 0:74E)
- <6>[ 0.000000@0] PERCPU: Embedded 9 pages/cpu @c1e55000 s13120 r8192 d15552 u36864
- <7>[ 0.000000@0] pcpu-alloc: s13120 r8192 d15552 u36864 alloc=9*4096
- <7>[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 401168
- <5>[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend ramoops.mem_address=0x04e00000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 storage=1 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x15100000,1080p50hz,full hdmimode=1080p50hz cvbsmode=576cvbs androidboot.firstboot=0 hdmitx= mac=e8:18:63:50:9f:3f
- <4>[ 0.000000@0] cvbs performance line = 0
- <4>[ 0.000000@0] cvbs trimming line = 0xa000
- <4>[ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
- <4>[ 0.000000@0] osd1:1
- <4>[ 0.000000@0] loaded:268435459
- <4>[ 0.000000@0] logo has been loaded
- <4>[ 0.000000@0] 1080p50hz:19
- <4>[ 0.000000@0] full:2
- <4>[ 0.000000@0] kernel get hdmimode form uboot is 1080p50hz
- <4>[ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
- <4>[ 0.000000@0] ******** uboot setup mac-addr: e8:18:63:50:9f:3f
- <6>[ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000@0] Memory: 64MB 16MB 1493MB = 1573MB total
- <5>[ 0.000000@0] Memory: 1532852k/1532852k available, 77900k reserved, 1259520K highmem
- <5>[ 0.000000@0] Virtual kernel memory layout:
- <5>[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- <5>[ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- <5>[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000@0] .text : 0xc0008000 - 0xc0af6610 (11194 kB)
- <5>[ 0.000000@0] .init : 0xc0af7000 - 0xc0b53340 ( 369 kB)
- <5>[ 0.000000@0] .data : 0xc0b54000 - 0xc0be1908 ( 567 kB)
- <5>[ 0.000000@0] .bss : 0xc0be1908 - 0xc0eb193c (2881 kB)
- <6>[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- <6>[ 0.000000@0] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000@0] NR_IRQS:256
- <6>[ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- <7>[ 0.000000@0] Global timer: MESON TIMER-F (c0b73800) initialized
- <6>[ 0.000000@0] Switching to timer-based delay loop
- <7>[ 0.000000@0] meson_serial_console_setup
- <6>[ 0.000000@0] console [ttyS0] enabled
- <6>[ 0.396945@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
- <6>[ 0.407189@0] pid_max: default: 32768 minimum: 301
- <6>[ 0.412064@0] Security Framework initialized
- <6>[ 0.416165@0] SELinux: Disabled at boot.
- <6>[ 0.420219@0] Mount-cache hash table entries: 512
- <6>[ 0.428324@0] Initializing cgroup subsys debug
- <6>[ 0.429186@0] Initializing cgroup subsys freezer
- <6>[ 0.433832@0] CPU: Testing write buffer coherency: ok
- <6>[ 0.439066@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
- <6>[ 0.444602@0] Setting up static identity map for 0xc079e280 - 0xc079e2d8
- <6>[ 0.451363@0] L310 cache controller enabled
- <6>[ 0.455316@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B
- <6>[ 0.462857@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000
- <6>[ 0.470932@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
- <4>[ 0.550161@0] write pen_release: 1
- <4>[ 0.550852@1] CPU1: Booted secondary processor
- <6>[ 0.556133@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
- <4>[ 0.570145@0] write pen_release: 2
- <4>[ 0.586288@2] CPU2: Booted secondary processor
- <6>[ 0.586303@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
- <4>[ 0.600145@0] write pen_release: 3
- <4>[ 0.608740@3] CPU3: Booted secondary processor
- <6>[ 0.616300@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
- <6>[ 0.616367@0] Brought up 4 CPUs
- <6>[ 0.624064@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
- <6>[ 0.630270@0] CPU: All CPU(s) started in SVC mode.
- <6>[ 0.635503@0] devtmpfs: initialized
- <4>[ 0.643660@0] clkrate [ xtal ] : 24000000
- <4>[ 0.643689@0] clkrate [ pll_sys ] : 1200000000
- <4>[ 0.646997@0] clkrate [ pll_fixed ] : 2550000000
- <4>[ 0.651665@0] clkrate [ pll_vid ] : 366000000
- <4>[ 0.656052@0] TODO: clk_get_rate_hpll() is not implement in M8 now
- <4>[ 0.662182@0] clkrate [ pll_hpll ] : 0
- <4>[ 0.665971@0] clkrate [ pll_ddr ] : 0
- <4>[ 0.669681@0] clkrate [ a9_clk ] : 1200000000
- <4>[ 0.674086@0] clkrate [ clk81 ] : 141666666
- <6>[ 0.679045@0] pinctrl core: initialized pinctrl subsystem
- <6>[ 0.683828@0] regulator-dummy: no parameters
- <6>[ 0.689082@0] NET: Registered protocol family 16
- <6>[ 0.698767@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- <4>[ 0.701564@0] VPU driver version: v03
- <4>[ 0.703870@0] vpu driver detect cpu type: m8m2
- <4>[ 0.708269@0] load vpu_clk in dts: 364000000Hz(7)
- <4>[ 0.712948@0] vpu_probe OK
- <6>[ 0.715807@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device
- <6>[ 0.724267@0] amlogic_gpio gpio: Probed amlogic GPIO driver
- <4>[ 0.728473@0] register lm device lm-root
- <4>[ 0.732117@0] register lm device lm1
- <4>[ 0.735636@0] register lm device lm0
- <4>[ 0.739262@0] Init pinux probe!
- <6>[ 0.742686@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver
- <4>[ 0.747962@0] tv_init_module
- <4>[ 0.750804@0] major number 254 for disp
- <4>[ 0.754584@0] vout_register_server
- <4>[ 0.757948@0] register tv module server ok
- <4>[ 0.762029@0] major number 0 for disp
- <4>[ 0.765624@0] register tv module server ok
- <4>[ 0.769693@0] video2_early_init enter
- <4>[ 0.773308@0] video2_early_init exit
- <6>[ 0.776864@0] aml_i2c version: 20140813
- <7>[ 0.780676@0] plat->state_name:default
- <7>[ 0.780686@0] master_no = 1, master_regs=fe108500
- <6>[ 0.780738@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ec73cca8)
- <6>[ 0.786585@0] aml-i2c i2c-A: aml i2c bus driver.
- <7>[ 0.791189@0] plat->state_name:default
- <7>[ 0.791199@0] master_no = 2, master_regs=fe1087c0
- <6>[ 0.791267@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ec73d0a8)
- <6>[ 0.797107@0] aml-i2c i2c-B: aml i2c bus driver.
- <7>[ 0.801712@0] plat->state_name:default
- <7>[ 0.801722@0] master_no = 3, master_regs=fe1087e0
- <6>[ 0.801767@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ec73d4a8)
- <6>[ 0.807629@0] aml-i2c i2c-C: aml i2c bus driver.
- <4>[ 0.812263@0] call aml_dvfs_init in
- <7>[ 0.815688@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
- <7>[ 0.815696@0] [DVFS]dvfs table of vcck_dvfs is:
- <7>[ 0.815701@0] [DVFS] freq, min_uV, max_uV
- <7>[ 0.815706@0] [DVFS] 96000, 860000, 860000
- <7>[ 0.815710@0] [DVFS] 192000, 860000, 860000
- <7>[ 0.815714@0] [DVFS] 312000, 860000, 860000
- <7>[ 0.815719@0] [DVFS] 408000, 860000, 860000
- <7>[ 0.815723@0] [DVFS] 504000, 860000, 860000
- <7>[ 0.815727@0] [DVFS] 600000, 860000, 860000
- <7>[ 0.815732@0] [DVFS] 720000, 860000, 860000
- <7>[ 0.815736@0] [DVFS] 816000, 880000, 880000
- <7>[ 0.815740@0] [DVFS] 1008000, 930000, 930000
- <7>[ 0.815745@0] [DVFS] 1200000, 980000, 980000
- <7>[ 0.815749@0] [DVFS] 1416000, 1030000, 1030000
- <7>[ 0.815753@0] [DVFS] 1608000, 1100000, 1100000
- <7>[ 0.815758@0] [DVFS] 1800000, 1130000, 1130000
- <7>[ 0.815762@0] [DVFS] 1992000, 1140000, 1140000
- <4>[ 0.815813@0] hdmitx: system: amhdmitx_init
- <4>[ 0.819789@0] hdmitx: system: Ver: 2014May6
- <4>[ 0.823986@0] hdmitx: system: amhdmitx_probe
- <4>[ 0.828286@0] hdmitx: system: not find cec config
- <4>[ 0.832823@0] hdmitx: system: not find vend_init_data
- <4>[ 0.837908@0] hdmitx: system: ALREADY init VIC = 31
- <4>[ 0.842654@0] hdmitx: system: gate/pwr cmd: 0
- <4>[ 0.847351@1] hdmitx: system: reset intr mask
- <4>[ 0.876157@0] hdmitx: system: irq 1
- <6>[ 0.876737@0] bio: create slab <bio-0> at 0
- <5>[ 0.878527@0] SCSI subsystem initialized
- <6>[ 0.882155@0] usbcore: registered new interface driver usbfs
- <6>[ 0.887668@0] usbcore: registered new interface driver hub
- <6>[ 0.893139@0] usbcore: registered new device driver usb
- <6>[ 0.898300@0] Linux video capture interface: v2.00
- <6>[ 0.903021@0] pps_core: LinuxPPS API ver. 1 registered
- <6>[ 0.908084@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- <6>[ 0.917328@0] PTP clock support registered
- <4>[ 0.921605@0] mode is 19,sync_duration_den=1,sync_duration_num=50
- <4>[ 0.927406@0] TV mode 1080p50hz selected.
- <4>[ 0.931381@0] already display in uboot
- <4>[ 0.935085@0] vinfo mode is: 1080p50hz
- <4>[ 0.940689@0] call aml_pmu_probe_init in
- <4>[ 0.942780@0] get property: use_pwm, value:0x00000001, dec: 1
- <4>[ 0.950359@0] get property: table_count, value:0x0000001d, dec: 29
- <4>[ 0.958029@0] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
- <4>[ 0.965188@0] 0, 001c0000, 860000
- <4>[ 0.968631@0] 1, 001b0001, 870000
- <4>[ 0.972089@0] 2, 001a0002, 880000
- <4>[ 0.975531@0] 3, 00190003, 890000
- <4>[ 0.978981@0] 4, 00180004, 900000
- <4>[ 0.982436@0] 5, 00170005, 910000
- <4>[ 0.985881@0] 6, 00160006, 920000
- <4>[ 0.986524@1] hdmitx: system: gate/pwr cmd: 4
- <4>[ 0.993652@0] 7, 00150007, 930000
- <4>[ 0.997093@0] 8, 00140008, 940000
- <4>[ 1.000549@0] 9, 00130009, 950000
- <4>[ 1.003993@0] 10, 0012000a, 960000
- <4>[ 1.007443@0] 11, 0011000b, 970000
- <4>[ 1.010898@0] 12, 0010000c, 980000
- <4>[ 1.014346@0] 13, 000f000d, 990000
- <4>[ 1.017793@0] 14, 000e000e, 1000000
- <4>[ 1.021248@0] 15, 000d000f, 1010000
- <4>[ 1.024693@0] 16, 000c0010, 1020000
- <4>[ 1.028143@0] 17, 000b0011, 1030000
- <4>[ 1.031598@0] 18, 000a0012, 1040000
- <4>[ 1.035046@0] 19, 00090013, 1050000
- <4>[ 1.038493@0] 20, 00080014, 1060000
- <4>[ 1.041948@0] 21, 00070015, 1070000
- <4>[ 1.045393@0] 22, 00060016, 1080000
- <4>[ 1.048843@0] 23, 00050017, 1090000
- <4>[ 1.052301@0] 24, 00040018, 1100000
- <4>[ 1.055743@0] 25, 00030019, 1110000
- <4>[ 1.059193@0] 26, 0002001a, 1120000
- <4>[ 1.062648@0] 27, 0001001b, 1130000
- <4>[ 1.066093@0] 28, 0000001c, 1140000
- <4>[ 1.069570@0] get pin for pwm--------
- <7>[ 1.073179@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
- <6>[ 1.073324@0] Advanced Linux Sound Architecture Driver Initialized.
- <6>[ 1.079637@0] Bluetooth: Core ver 2.16
- <6>[ 1.083118@0] NET: Registered protocol family 31
- <6>[ 1.087656@0] Bluetooth: HCI device and connection manager initialized
- <6>[ 1.094147@0] Bluetooth: HCI socket layer initialized
- <6>[ 1.099131@0] Bluetooth: L2CAP socket layer initialized
- <6>[ 1.104322@0] Bluetooth: SCO socket layer initialized
- <6>[ 1.109457@0] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 1.117167@0] Switching to clocksource Timer-E
- <6>[ 1.131924@0] NET: Registered protocol family 2
- <6>[ 1.132298@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- <6>[ 1.138018@0] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- <6>[ 1.144595@0] TCP: Hash tables configured (established 4096 bind 4096)
- <6>[ 1.151044@0] TCP: reno registered
- <6>[ 1.154370@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
- <6>[ 1.160333@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- <6>[ 1.166829@0] NET: Registered protocol family 1
- <6>[ 1.171377@0] RPC: Registered named UNIX socket transport module.
- <6>[ 1.177224@0] RPC: Registered udp transport module.
- <6>[ 1.182060@0] RPC: Registered tcp transport module.
- <6>[ 1.186878@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <4>[ 1.190528@1] hdmitx: system: gate/pwr cmd: 5
- <4>[ 1.190530@1] hdmitx: edid: edid ready
- <4>[ 1.190531@1] hdmitx: system: gate/pwr cmd: 4
- <4>[ 1.205836@0] wifi_dev_probe
- <4>[ 1.208615@0] wifi_dt : interrupt_pin=GPIOX_21
- <4>[ 1.213030@0] wifi_dt : irq_num=null
- <4>[ 1.216548@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
- <4>[ 1.221659@0] wifi_dt : power_on_pin=GPIOAO_6
- <4>[ 1.225951@0] wifi_dt : power_on_pin2=GPIOX_11
- <4>[ 1.230360@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=0
- <6>[ 1.239078@0] Unpacking initramfs...
- <6>[ 1.289980@0] Freeing initrd memory: 1088K (c4e09000 - c4f19000)
- <6>[ 1.291758@0] audit: initializing netlink socket (disabled)
- <5>[ 1.295893@0] type=2000 audit(1.210:1): initialized
- <7>[ 1.301055@1] balance_pgdat end zone=0, pgdat_is_balanced=0
- <4>[ 1.301146@0] bounce pool size: 64 pages
- <5>[ 1.307466@0] VFS: Disk quotas dquot_6.5.2
- <4>[ 1.308768@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- <6>[ 1.316383@0] exFAT: Core Version 1.2.4
- <6>[ 1.319065@0] exFAT: FS Version 1.2.4
- <5>[ 1.323360@0] NFS: Registering the id_resolver key type
- <5>[ 1.327889@0] Key type id_resolver registered
- <5>[ 1.332194@0] Key type id_legacy registered
- <6>[ 1.336612@0] NTFS driver 2.1.30 [Flags: R/O].
- <6>[ 1.340924@0] fuse init (API version 7.22)
- <6>[ 1.345116@0] msgmni has been set to 623
- <6>[ 1.349546@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- <6>[ 1.356172@0] io scheduler noop registered (default)
- <6>[ 1.361078@0] io scheduler deadline registered
- <6>[ 1.365556@0] io scheduler cfq registered
- <6>[ 1.371799@0] loop: module loaded
- <6>[ 1.373070@0] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 1.377887@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <4>[ 1.384551@0] ethernet base addr is fe0c0000
- <4>[ 1.388416@0] key device don't create,extenal_api_key_set_version:2052
- <4>[ 1.390535@1] hdmitx: system: gate/pwr cmd: 5
- <4>[ 1.390537@1] hdmitx: edid: edid ready
- <4>[ 1.390543@1] hdmitx: edid: check sum valid
- <4>[ 1.390544@1] hdmitx: edid: check sum valid
- <4>[ 1.390547@1] hdmitx: edid: blk0 raw data
- <4>[ 1.390568@1] 00ffffffffffff00410c00000101010104180103804024780af9aba2554a9a25
- <4>[ 1.390588@1] 0f474a21080081800101010101010101010101010101023a801871382d40582c
- <4>[ 1.390608@1] 450080682100001e1b2150a051001e3048883500806821000018000000fc0050
- <4>[ 1.390627@1] 48494c495053204654560a20000000fd00384c1e5311000a20202020202001cb
- <4>[ 1.390628@1]
- <4>[ 1.390630@1] hdmitx: edid: blk1 raw data
- <4>[ 1.390650@1] 020339714d9f102021140513041102150601290907031507503d07c083010000
- <4>[ 1.390670@1] 78030c001000b82d20c80e014100fc20306070281038106810023a80d072382d
- <4>[ 1.390690@1] 40102c458080682100001a011d803e73382d407e2c458080682100001e011d80
- <4>[ 1.390710@1] d0721c1620102c258080682100009e00000000000000000000000000000000b2
- <4>[ 1.390710@1]
- <4>[ 1.390742@1] hdmitx: edid: find IEEEOUT
- <4>[ 1.390781@1] hdmitx: video: get current mode: 1080p50hz
- <4>[ 1.390788@1] is_similar_hdmi_vic[326] vic_old=31,mode_new=19
- <4>[ 1.390790@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 31
- <4>[ 1.390792@1] hdmitx: audio: audio channel num is 0
- <4>[ 1.390798@1] hdmitx: audio: SPDIF
- <4>[ 1.390809@1] hdmitx: audio: current VIC: 31
- <4>[ 1.390811@1] hdmitx: audio: audio sample rate: 0
- <4>[ 1.390812@1] hdmitx: audio: set audio N para
- <4>[ 1.390820@1] hdmitx: audio: PCM out to HDMI
- <4>[ 1.411374@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
- <4>[ 1.411376@1] hdmitx: audio: i2s_to_spdif_flag:1
- <4>[ 1.411377@1] hdmitx: audio: Enable audio spdif to HDMI
- <4>[ 1.411431@1] hdmitx: cec: CEC not ready
- <4>[ 1.411434@1] hdmi detect: plug.
- <4>[ 1.549375@0] ret = -22
- <4>[ 1.549375@0] print_buff=
- <6>[ 1.554397@0] stmmac - user ID: 0x11, Synopsys ID: 0x37
- <6>[ 1.559529@0] Normal descriptors
- <6>[ 1.562815@0] Ring mode enabled
- <6>[ 1.565998@0] DMA HW capability register supported
- <6>[ 1.570664@0] RX Checksum Offload Engine supported (type 2)
- <6>[ 1.576437@0] TX Checksum insertion supported
- <6>[ 1.580840@0] Wake-Up On Lan supported
- <6>[ 1.584649@0] Enable RX Mitigation via HW Watchdog Timer
- <6>[ 1.612540@0] libphy: stmmac: probed
- <6>[ 1.612568@0] eth0: PHY ID 001cc916 at 0 IRQ 0 (stmmac-0:00) active
- <6>[ 1.616697@0] eth0: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01) active
- <6>[ 1.623236@0] PPP generic driver version 2.4.2
- <6>[ 1.627659@0] PPP BSD Compression module registered
- <6>[ 1.632409@0] PPP Deflate Compression module registered
- <6>[ 1.637574@0] PPP MPPE Compression module registered
- <6>[ 1.642495@0] NET: Registered protocol family 24
- <6>[ 1.647249@0] usbcore: registered new interface driver cdc_acm
- <6>[ 1.652850@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 1.660995@0] usbcore: registered new interface driver usb-storage
- <6>[ 1.667128@0] usbcore: registered new interface driver usbserial
- <6>[ 1.673053@0] usbcore: registered new interface driver cp210x
- <6>[ 1.678726@0] usbserial: USB Serial support registered for cp210x
- <6>[ 1.684782@0] usbcore: registered new interface driver ftdi_sio
- <6>[ 1.690639@0] usbserial: USB Serial support registered for FTDI USB Serial Device
- <6>[ 1.698055@0] usbcore: registered new interface driver pl2303
- <6>[ 1.703747@0] usbserial: USB Serial support registered for pl2303
- <6>[ 1.709948@0] mousedev: PS/2 mouse device common for all mice
- <6>[ 1.715644@0] usbcore: registered new interface driver xpad
- <6>[ 1.721011@0] usbcore: registered new interface driver usb_acecad
- <6>[ 1.727033@0] usbcore: registered new interface driver aiptek
- <6>[ 1.732745@0] usbcore: registered new interface driver gtco
- <6>[ 1.738245@0] usbcore: registered new interface driver hanwang
- <6>[ 1.744033@0] usbcore: registered new interface driver kbtab
- <6>[ 1.749628@0] usbcore: registered new interface driver wacom
- <6>[ 1.755299@0] i2c /dev entries driver
- <6>[ 1.759109@0] usbcore: registered new interface driver uvcvideo
- <6>[ 1.764713@0] USB Video Class driver (1.1.1)
- <6>[ 1.769090@0] device-mapper: uevent: version 1.0.3
- <6>[ 1.773851@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- <6>[ 1.782352@0] Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.786782@0] Bluetooth: HCI H4 protocol initialized
- <6>[ 1.791912@0] hidraw: raw HID events driver (C) Jiri Kosina
- <6>[ 1.797963@0] usbcore: registered new interface driver usbhid
- <6>[ 1.802927@0] usbhid: USB HID core driver
- <6>[ 1.807098@0] ashmem: initialized
- <6>[ 1.810289@0] logger: created 256K log 'log_main'
- <6>[ 1.814914@0] logger: created 256K log 'log_events'
- <6>[ 1.819737@0] logger: created 256K log 'log_radio'
- <6>[ 1.824499@0] logger: created 256K log 'log_system'
- <4>[ 1.829347@0] vout_init_module
- <4>[ 1.832285@0] start init vout module
- <4>[ 1.835792@0] create vout attribute ok
- <4>[ 1.839890@0] ge2d_init
- <4>[ 1.841997@0] ge2d_dev major:243
- <4>[ 1.845269@0] ge2d start monitor
- <4>[ 1.848399@0] osd_init
- <4>[ 1.848404@1] ge2d workqueue monitor start
- <4>[ 1.854788@0] osd_probe, vinfo:c07f20c0
- <4>[ 1.858725@0] Frame buffer memory assigned at phy:0x09100000, vir:0xf1000000, size=24576K
- <4>[ 1.866662@0] osd_probe, mydef_var:c0bab3b0, vinfo:c07f20c0
- <4>[ 1.872182@0] init fbdev bpp is :32
- <4>[ 1.875618@0] ---------------clear framebuffer0 memory
- <4>[ 1.891859@0] Frame buffer memory assigned at phy:0x0a900000, vir:0xf0200000, size=1024K
- <4>[ 1.894284@0] osd_probe, mydef_var:c0bab3b0, vinfo:c07f20c0
- <4>[ 1.899803@0] don't find to display_size_default from mesonfb-dts
- <4>[ 1.905853@0] init fbdev bpp is :16
- <4>[ 1.911785@0] osd probe ok
- <4>[ 1.912038@0] osd_ext_init
- <4>[ 1.914829@0] vout2_init_module enter
- <6>[ 1.918323@0] enter aml_sysled_init
- <6>[ 1.927677@0] amlvideo-000: V4L2 device registered as video10
- <6>[ 1.927903@0] amlvideo2: V4L2 device registered as video11
- <6>[ 1.933380@0] ionvideo-000: V4L2 device registered as video13
- <6>[ 1.938901@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
- <7>[ 1.947279@0] DI: di_init
- <7>[ 1.947306@0] DI: di_probe
- <4>[ 1.947547@0] aml_wdt_driver_init,301
- <6>[ 1.950926@0] ** disable watchdog
- <6>[ 1.954297@0] keys===========================================
- <4>[ 1.959860@0] keys_devno=f000000
- <6>[ 1.963167@0] securitykey: device aml_keys created
- <4>[ 1.967800@0] amlkeys=0
- <6>[ 1.970263@0] platform_driver_register--aml_keys_driver--------------------
- <4>[ 1.977311@0] set uart_ao pinmux use pinctrl subsystem
- <4>[ 1.982229@0] P_AO_RTI_PIN_MUX_REG:5801
- <5>[ 1.986004@0] start uart_ao_ttyS0:(irq = 122)
- <5>[ 1.990330@0] register uart_ao ok
- <4>[ 1.993739@0] set uart_a pinmux use pinctrl subsystem
- <4>[ 1.998585@0] P_AO_RTI_PIN_MUX_REG:5801
- <5>[ 2.002419@0] start uart_a_ttyS1:(irq = 58)
- <5>[ 2.006520@0] register uart_a ok
- <5>[ 2.009851@0] start uart_d_ttyS4:(irq = 126)
- <5>[ 2.013969@0] register uart_d ok
- <6>[ 2.017210@0] dwc_otg: version 3.10a 12-MAY-2014
- <7>[ 2.021745@0] dwc_otg lm-root: dwc_otg_driver_probe(ec76a600)
- <4>[ 2.021753@0] dwc_otg_driver_probe NOT match
- <7>[ 2.025941@0] dwc_otg lm1: dwc_otg_driver_probe(ec76a800)
- <6>[ 2.025956@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
- <5>[ 2.034502@0] USB (1) use clock source: XTAL input
- <7>[ 2.040276@0] dwc_otg lm1: base=0xfe080000
- <7>[ 2.040283@0] dwc_otg lm1: dwc_otg_device=0xec994800
- <4>[ 2.060335@0] Core Release: 3.10a
- <4>[ 2.060361@0] Setting default values for core params
- <4>[ 2.062942@0] curmode: 1, host_only: 1
- <7>[ 2.066654@0] dwc_otg lm1: DMA config: BURST_DEFAULT
- <4>[ 2.086767@0] Using Buffer DMA mode
- <4>[ 2.086792@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- <4>[ 2.089105@0] Working on port type = HOST
- <6>[ 2.093826@0] dwc_otg lm1: DWC OTG Controller
- <6>[ 2.097399@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
- <6>[ 2.104074@0] dwc_otg lm1: irq 63, io mem 0x00000000
- <4>[ 2.108943@0] -------hcd->flags.d32 = 0
- <4>[ 2.112790@0] Init: Port Power? op_state=1
- <4>[ 2.116791@0] Init1: Power Port (0)
- <6>[ 2.120344@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 2.127144@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 2.134503@0] usb usb1: Product: DWC OTG Controller
- <6>[ 2.139304@0] usb usb1: Manufacturer: Linux 3.10.33 dwc_otg_hcd
- <6>[ 2.145190@0] usb usb1: SerialNumber: lm1
- <6>[ 2.149446@0] hub 1-0:1.0: USB hub found
- <6>[ 2.153063@0] hub 1-0:1.0: 1 port detected
- <7>[ 2.157207@0] dwc_otg lm0: dwc_otg_driver_probe(ec76aa00)
- <6>[ 2.157235@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
- <5>[ 2.165647@0] USB (0) use clock source: XTAL input
- <7>[ 2.171377@0] dwc_otg lm0: base=0xfe040000
- <7>[ 2.171384@0] dwc_otg lm0: dwc_otg_device=0xec8f8100
- <4>[ 2.191434@0] Core Release: 3.10a
- <4>[ 2.191459@0] Setting default values for core params
- <4>[ 2.194035@0] curmode: 1, host_only: 0
- <7>[ 2.237711@0] dwc_otg lm0: DMA config: BURST_DEFAULT
- <4>[ 2.257810@0] Using Buffer DMA mode
- <4>[ 2.257834@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- <4>[ 2.260147@0] Working on port type = OTG
- <4>[ 2.264049@0] Current port type: SLAVE
- <6>[ 2.267861@0] dwc_otg lm0: DWC OTG Controller
- <6>[ 2.272092@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
- <6>[ 2.278705@0] dwc_otg lm0: irq 62, io mem 0x00000000
- <6>[ 2.283662@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 2.290534@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 2.297845@0] usb usb2: Product: DWC OTG Controller
- <6>[ 2.302692@0] usb usb2: Manufacturer: Linux 3.10.33 dwc_otg_hcd
- <6>[ 2.308535@0] usb usb2: SerialNumber: lm0
- <6>[ 2.312774@0] hub 2-0:1.0: USB hub found
- <6>[ 2.316389@0] hub 2-0:1.0: 1 port detected
- <4>[ 2.320584@0] Dedicated Tx FIFOs mode
- <4>[ 2.324271@0] using timer detect id change, ec992400
- <4>[ 2.329071@0] boot_device_flag : 1
- <4>[ 2.332378@0] ===========================================amlnf_init:643,nand device tree ok,dev-name:nand
- <4>[ 2.341852@0] Nand PHY driver Version: 2.01.001.0006 (c) 2013 Amlogic Inc.
- <4>[ 2.348655@0] HOST mode
- <4>[ 2.351085@2] amlnf_phy_init : amlnf init flag 0
- <4>[ 2.351113@1] Indeed it is in host mode hprt0 = 00021501
- <4>[ 2.360972@2] ######STS IRQ mode for nand driver
- <4>[ 2.365511@2] NAND device id: ad de 14 a7 42 4a ad de
- <4>[ 2.370478@2] detect NAND device: E revision 1Ynm NAND 8GiB H27UCG8T2E
- <4>[ 2.380228@0] -------hcd->flags.d32 = 0
- <4>[ 2.380747@0] Init: Port Power? op_state=1
- <4>[ 2.384778@0] Init1: Power Port (0)
- <4>[ 2.388229@0] set usb port power on (board gpio 15)!
- <4>[ 2.394143@2] status:0
- <4>[ 2.395477@2] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gf53a6fa-dirty #12
- <4>[ 2.403003@2] [<c0014d28>] (unwind_backtrace+0x0/0xf8) from [<c0011e20>] (show_stack+0x10/0x14)
- <4>[ 2.411619@2] [<c0011e20>] (show_stack+0x10/0x14) from [<c04da6d8>] (controller_quene_rb+0x1b8/0x1d0)
- <4>[ 2.420767@2] [<c04da6d8>] (controller_quene_rb+0x1b8/0x1d0) from [<c04d12a4>] (nand_reset+0xc4/0x19c)
- <4>[ 2.429979@2] [<c04d12a4>] (nand_reset+0xc4/0x19c) from [<c04d1650>] (read_id+0x60/0x140)
- <4>[ 2.438094@2] [<c04d1650>] (read_id+0x60/0x140) from [<c04d0b7c>] (amlnand_chip_init+0x348/0x724)
- <4>[ 2.446891@2] [<c04d0b7c>] (amlnand_chip_init+0x348/0x724) from [<c04d9690>] (amlnf_phy_init+0x160/0x208)
- <4>[ 2.456378@2] [<c04d9690>] (amlnf_phy_init+0x160/0x208) from [<c04cb0a8>] (amlnf_init+0xb8/0x12c)
- <4>[ 2.465180@2] [<c04cb0a8>] (amlnf_init+0xb8/0x12c) from [<c0323140>] (platform_drv_probe+0x14/0x18)
- <4>[ 2.474148@2] [<c0323140>] (platform_drv_probe+0x14/0x18) from [<c0321f6c>] (driver_probe_device+0xc4/0x20c)
- <4>[ 2.483892@2] [<c0321f6c>] (driver_probe_device+0xc4/0x20c) from [<c032211c>] (__driver_attach+0x68/0x8c)
- <4>[ 2.493381@2] [<c032211c>] (__driver_attach+0x68/0x8c) from [<c03206cc>] (bus_for_each_dev+0x4c/0x8c)
- <4>[ 2.502522@2] [<c03206cc>] (bus_for_each_dev+0x4c/0x8c) from [<c03216d4>] (bus_add_driver+0xd0/0x238)
- <4>[ 2.511664@2] [<c03216d4>] (bus_add_driver+0xd0/0x238) from [<c0322668>] (driver_register+0xa0/0x13c)
- <4>[ 2.520807@2] [<c0322668>] (driver_register+0xa0/0x13c) from [<c0008554>] (do_one_initcall+0x94/0x144)
- <4>[ 2.530033@2] [<c0008554>] (do_one_initcall+0x94/0x144) from [<c0af7b78>] (kernel_init_freeable+0x100/0x1cc)
- <6>[ 2.530222@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
- <4>[ 2.530445@0] Indeed it is in host mode hprt0 = 00001101
- <4>[ 2.551608@2] [<c0af7b78>] (kernel_init_freeable+0x100/0x1cc) from [<c078d7ec>] (kernel_init+0x8/0xe4)
- <4>[ 2.560830@2] [<c078d7ec>] (kernel_init+0x8/0xe4) from [<c000e218>] (ret_from_fork+0x14/0x3c)
- <4>[ 2.582571@2] status:0
- <4>[ 2.582592@2] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gf53a6fa-dirty #12
- <4>[ 2.586816@2] [<c0014d28>] (unwind_backtrace+0x0/0xf8) from [<c0011e20>] (show_stack+0x10/0x14)
- <4>[ 2.595447@2] [<c0011e20>] (show_stack+0x10/0x14) from [<c04da6d8>] (controller_quene_rb+0x1b8/0x1d0)
- <4>[ 2.604592@2] [<c04da6d8>] (controller_quene_rb+0x1b8/0x1d0) from [<c04d12a4>] (nand_reset+0xc4/0x19c)
- <4>[ 2.613819@2] [<c04d12a4>] (nand_reset+0xc4/0x19c) from [<c04d1650>] (read_id+0x60/0x140)
- <4>[ 2.621926@2] [<c04d1650>] (read_id+0x60/0x140) from [<c04d0b7c>] (amlnand_chip_init+0x348/0x724)
- <4>[ 2.630723@2] [<c04d0b7c>] (amlnand_chip_init+0x348/0x724) from [<c04d9690>] (amlnf_phy_init+0x160/0x208)
- <4>[ 2.640213@2] [<c04d9690>] (amlnf_phy_init+0x160/0x208) from [<c04cb0a8>] (amlnf_init+0xb8/0x12c)
- <4>[ 2.649004@2] [<c04cb0a8>] (amlnf_init+0xb8/0x12c) from [<c0323140>] (platform_drv_probe+0x14/0x18)
- <4>[ 2.657981@2] [<c0323140>] (platform_drv_probe+0x14/0x18) from [<c0321f6c>] (driver_probe_device+0xc4/0x20c)
- <4>[ 2.667725@2] [<c0321f6c>] (driver_probe_device+0xc4/0x20c) from [<c032211c>] (__driver_attach+0x68/0x8c)
- <4>[ 2.677212@2] [<c032211c>] (__driver_attach+0x68/0x8c) from [<c03206cc>] (bus_for_each_dev+0x4c/0x8c)
- <4>[ 2.686356@2] [<c03206cc>] (bus_for_each_dev+0x4c/0x8c) from [<c03216d4>] (bus_add_driver+0xd0/0x238)
- <4>[ 2.695497@2] [<c03216d4>] (bus_add_driver+0xd0/0x238) from [<c0322668>] (driver_register+0xa0/0x13c)
- <4>[ 2.704640@2] [<c0322668>] (driver_register+0xa0/0x13c) from [<c0008554>] (do_one_initcall+0x94/0x144)
- <4>[ 2.713870@2] [<c0008554>] (do_one_initcall+0x94/0x144) from [<c0af7b78>] (kernel_init_freeable+0x100/0x1cc)
- <4>[ 2.723617@2] [<c0af7b78>] (kernel_init_freeable+0x100/0x1cc) from [<c078d7ec>] (kernel_init+0x8/0xe4)
- <6>[ 2.731418@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- <6>[ 2.731423@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- <6>[ 2.731426@0] usb 1-1: Product: USB2.0 Hub
- <6>[ 2.731864@0] hub 1-1:1.0: USB hub found
- <6>[ 2.732139@0] hub 1-1:1.0: 4 ports detected
- <4>[ 2.733697@0] Indeed it is in host mode hprt0 = 00021501
- <4>[ 2.764243@2] [<c078d7ec>] (kernel_init+0x8/0xe4) from [<c000e218>] (ret_from_fork+0x14/0x3c)
- <4>[ 2.785981@2] status:0
- <4>[ 2.786002@2] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.10.33-gf53a6fa-dirty #12
- <4>[ 2.790226@2] [<c0014d28>] (unwind_backtrace+0x0/0xf8) from [<c0011e20>] (show_stack+0x10/0x14)
- <4>[ 2.798843@2] [<c0011e20>] (show_stack+0x10/0x14) from [<c04da6d8>] (controller_quene_rb+0x1b8/0x1d0)
- <4>[ 2.807996@2] [<c04da6d8>] (controller_quene_rb+0x1b8/0x1d0) from [<c04d12a4>] (nand_reset+0xc4/0x19c)
- <4>[ 2.817226@2] [<c04d12a4>] (nand_reset+0xc4/0x19c) from [<c04d1650>] (read_id+0x60/0x140)
- <4>[ 2.825330@2] [<c04d1650>] (read_id+0x60/0x140) from [<c04d0b7c>] (amlnand_chip_init+0x348/0x724)
- <4>[ 2.834128@2] [<c04d0b7c>] (amlnand_chip_init+0x348/0x724) from [<c04d9690>] (amlnf_phy_init+0x160/0x208)
- <4>[ 2.843614@2] [<c04d9690>] (amlnf_phy_init+0x160/0x208) from [<c04cb0a8>] (amlnf_init+0xb8/0x12c)
- <4>[ 2.852415@2] [<c04cb0a8>] (amlnf_init+0xb8/0x12c) from [<c0323140>] (platform_drv_probe+0x14/0x18)
- <4>[ 2.861383@2] [<c0323140>] (platform_drv_probe+0x14/0x18) from [<c0321f6c>] (driver_probe_device+0xc4/0x20c)
- <4>[ 2.871128@2] [<c0321f6c>] (driver_probe_device+0xc4/0x20c) from [<c032211c>] (__driver_attach+0x68/0x8c)
- <4>[ 2.880616@2] [<c032211c>] (__driver_attach+0x68/0x8c) from [<c03206cc>] (bus_for_each_dev+0x4c/0x8c)
- <4>[ 2.889751@2] [<c03206cc>] (bus_for_each_dev+0x4c/0x8c) from [<c03216d4>] (bus_add_driver+0xd0/0x238)
- <4>[ 2.898901@2] [<c03216d4>] (bus_add_driver+0xd0/0x238) from [<c0322668>] (driver_register+0xa0/0x13c)
- <4>[ 2.908043@2] [<c0322668>] (driver_register+0xa0/0x13c) from [<c0008554>] (do_one_initcall+0x94/0x144)
- <6>[ 2.910229@1] usb 2-1: new high-speed USB device number 2 using dwc_otg
- <4>[ 2.910307@0] Indeed it is in host mode hprt0 = 00001101
- <4>[ 2.929090@2] [<c0008554>] (do_one_initcall+0x94/0x144) from [<c0af7b78>] (kernel_init_freeable+0x100/0x1cc)
- <4>[ 2.938837@2] [<c0af7b78>] (kernel_init_freeable+0x100/0x1cc) from [<c078d7ec>] (kernel_init+0x8/0xe4)
- <4>[ 2.948064@2] [<c078d7ec>] (kernel_init+0x8/0xe4) from [<c000e218>] (ret_from_fork+0x14/0x3c)
- <4>[ 2.956872@2] AML_NAND_NEW_OOB : new oob
- <4>[ 2.960398@2] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15
- <4>[ 2.968235@2] boot_device_flag = 1
- <4>[ 2.974453@2] hynix nand get default reg value at blk:8, page:2048
- <4>[ 2.978773@2] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0
- <4>[ 2.991603@2] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 0
- <4>[ 2.994851@2] nand shipped bbt at block 0
- <4>[ 3.025602@2] NAND CKECK : arg phyp: arg_valid= 1, valid_blk_addr = 9, valid_page_addr = 2
- <4>[ 3.062847@2] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 26
- <4>[ 3.066173@2] i=0,register --- nand_key
- <4>[ 3.097897@2] NAND CKECK : arg nsec: arg_valid= 1, valid_blk_addr = 6, valid_page_addr = 30
- <6>[ 3.110788@0] usb 2-1: New USB device found, idVendor=0b48, idProduct=3011
- <6>[ 3.112016@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- <6>[ 3.119256@0] usb 2-1: Product: TechnoTrend USB2.0
- <6>[ 3.124032@0] usb 2-1: Manufacturer: Jactek
- <6>[ 3.128139@0] usb 2-1: SerialNumber: 000000031
- <4>[ 3.140820@2] NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 11, valid_page_addr = 96
- <4>[ 3.146055@2] amlnand_phydev_init,1177,phydev->offset=0,phydev->size=1000000
- <4>[ 3.150674@2] amlnand_phydev_init,1177,phydev->offset=d000000,phydev->size=26000000
- <4>[ 3.158252@2] amlnand_phydev_init,1177,phydev->offset=33000000,phydev->size=52000000
- <4>[ 3.165936@2] amlnand_phydev_init,1177,phydev->offset=85000000,phydev->size=17b000000
- <4>[ 3.173698@2] nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane
- <4>[ 3.183272@2] nfcache : offset: 0x00000d000000 -0x000026000000 : partitons 1 : single_chip multi_plane
- <4>[ 3.192758@2] nfcode : offset: 0x000033000000 -0x000052000000 : partitons 5 : single_chip multi_plane
- <4>[ 3.202246@2] nfdata : offset: 0x000085000000 -0x00017b000000 : partitons 1 : single_chip multi_plane
- <6>[ 3.210497@0] usb 1-1.2: new full-speed USB device number 3 using dwc_otg
- <4>[ 3.218459@2] amlnand_add_nftl:
- <5>[ 3.221654@2] Creating 1 ntd partitions
- <4>[ 3.225354@2] block_num 76
- <4>[ 3.229476@2] ------init_ntd
- <5>[ 3.231145@2] ntd: Giving out device 0 to nfcache
- <5>[ 3.235618@2] Creating 5 ntd partitions
- <4>[ 3.239413@2] block_num 164
- <5>[ 3.245292@2] ntd: Giving out device 1 to nfcode
- <5>[ 3.246830@2] Creating 1 ntd partitions
- <4>[ 3.250636@2] block_num 758
- <5>[ 3.266944@2] ntd: Giving out device 2 to nfdata
- <4>[ 3.267249@2] ethernet_driver probe!
- <4>[ 3.269454@2] Please config ethbaseaddr.
- <4>[ 3.273352@2] meson-eth: probe of meson-eth failed with error -1
- <4>[ 3.279392@2] Amlogic A/V streaming port init
- <4>[ 3.284376@2] buffersize=262144,0,start=0
- <4>[ 3.287572@2] Subtitle stbuf alloced at 0xebe40000, size = 262144
- <4>[ 3.293615@2] changed the (2) buffer size from 0 to 262144
- <4>[ 3.299165@2] init vdec memsource ca00000->1c9fffff
- <4>[ 3.303958@2] [tsync_pcr_init]init success.
- <4>[ 3.308093@2] amvideocap_init_module
- <4>[ 3.311745@2] regist mpeg12 codec profile
- <6>[ 3.314344@0] usb 1-1.2: New USB device found, idVendor=22a1, idProduct=2801
- <6>[ 3.314350@0] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- <6>[ 3.314353@0] usb 1-1.2: Product: MHTF
- <6>[ 3.314356@0] usb 1-1.2: Manufacturer: MHTF
- <4>[ 3.337921@2] regist mpeg4 codec profile
- <4>[ 3.341751@2] amvdec_vc1 module init
- <6>[ 3.342113@0] input: MHTF MHTF as /devices/lm1/usb1/1-1/1-1.2/1-1.2:1.2/input/input0
- <6>[ 3.342396@0] hid-generic 0003:22A1:2801.0001: input,hiddev0,hidraw0: USB HID v1.00 Keyboard [MHTF MHTF] on usb-lm1-1.2/input2
- <4>[ 3.364295@2] regist vc1 codec profile
- <4>[ 3.367950@2] amvdec_h264 module init
- <4>[ 3.371638@2] regist h264 codec profile
- <4>[ 3.375368@2] amvdec_h264mvc module init
- <4>[ 3.379281@2] regist hmvc codec profile
- <4>[ 3.383053@2] amvdec_h264_4k2k module init
- <4>[ 3.387140@2] regist h264_4k2k codec profile
- <4>[ 3.391333@2] amvdec_h265 module init
- <4>[ 3.394981@2] regist hevc codec profile
- <4>[ 3.398772@2] regist mjpeg codec profile
- <6>[ 3.400368@0] input: MHTF MHTF as /devices/lm1/usb1/1-1/1-1.2/1-1.2:1.3/input/input1
- <6>[ 3.400623@0] hid-generic 0003:22A1:2801.0002: input,hiddev0,hidraw1: USB HID v1.00 Joystick [MHTF MHTF] on usb-lm1-1.2/input3
- <6>[ 3.402257@0] input: MHTF MHTF as /devices/lm1/usb1/1-1/1-1.2/1-1.2:1.4/input/input2
- <6>[ 3.402483@0] hid-generic 0003:22A1:2801.0003: input,hidraw2: USB HID v1.00 Mouse [MHTF MHTF] on usb-lm1-1.2/input4
- <4>[ 3.439635@2] amvdec_real module init
- <4>[ 3.443293@2] amvdec_avs module init
- <4>[ 3.446871@2] amvenc_avc memory resource undefined.
- <4>[ 3.451622@2] encode_wq_init.
- <4>[ 3.454547@2] encode start monitor.
- <4>[ 3.458062@1] encode workqueue monitor start.
- <6>[ 3.460529@0] input: MHTF MHTF as /devices/lm1/usb1/1-1/1-1.2/1-1.2:1.5/input/input3
- <4>[ 3.470136@2] jpegenc module init
- <6>[ 3.470251@0] hid-generic 0003:22A1:2801.0004: input,hiddev0,hidraw3: USB HID v1.00 Keyboard [MHTF MHTF] on usb-lm1-1.2/input5
- <4>[ 3.484757@2] alloc_keep_buffer keep_y_addr eba00000
- <4>[ 3.489489@2] alloc_keep_buffer keep_u_addr ebf00000
- <4>[ 3.494409@2] alloc_keep_buffer keep_v_addr ec000000
- <4>[ 3.499310@2] yaddr=eba00000,u_addr=ebf00000,v_addr=ec000000
- <4>[ 3.505128@2] create_ge2d_work_queue video task ok
- <4>[ 3.509746@2] video2_init enter
- <4>[ 3.513163@2]
- <4>[ 3.513163@2]
- <4>[ 3.513163@2] VECM init
- <4>[ 3.513163@2]
- <6>[ 3.520516@2] efuse===========================================
- <6>[ 3.526223@2] efuse: device efuse created
- <6>[ 3.530147@2] efuse--------------------------------------------
- <6>[ 3.535976@2] SARADC Driver init.
- <4>[ 3.539329@2] __saradc_probe__
- <4>[ 3.690330@2] saradc calibration: ref_val = 509
- <4>[ 3.690359@2] saradc calibration: ref_nominal = 512
- <4>[ 3.694053@2] saradc calibration: coef = 4112
- <6>[ 3.698396@2] Remote Driver
- <4>[ 3.701194@2] Remote platform_data g_remote_base=fe600580
- <4>[ 3.706496@2] set drvdata completed
- <4>[ 3.710015@2] device_create_file completed
- <6>[ 3.714540@2] input: aml_keypad as /devices/platform/meson-remote/input/input4
- <4>[ 3.721578@2] input_register_device completed
- <4>[ 3.725914@2] [0xffffff00] = 0x1dd0190
- <4>[ 3.729588@2] [0xffffff04] = 0xf800ca
- <4>[ 3.733222@2] [0xffffff08] = 0x82006e
- <4>[ 3.736833@2] [0xffffff0c] = 0x3c0030
- <4>[ 3.740462@2] [0xffffff10] = 0x30fa0013
- <4>[ 3.744250@2] [0xffffff18] = 0x6f19000
- <4>[ 3.747959@2] [0xffffff1c] = 0xbe40
- <4>[ 3.751416@2] [0x0] = 0xfa00a0
- <4>[ 3.754428@2] [0x4] = 0xfa00a0
- <4>[ 3.757447@2] [0x8] = 0xfa00a0
- <4>[ 3.760471@2] [0xc] = 0x640030
- <4>[ 3.763484@2] [0x10] = 0x30fa0013
- <4>[ 3.766762@2] [0x18] = 0x961b800
- <4>[ 3.769953@2] [0x1c] = 0x9740
- <4>[ 3.772891@2] [0x20] = 0x104
- <4>[ 3.775732@2] [0x24] = 0x0
- <4>[ 3.778405@2] [0x28] = 0x0
- <4>[ 3.781085@2] set_remote_mode[69]
- <4>[ 3.784370@2] remote config major:233
- <4>[ 3.788159@2] physical address:0x2c0c2000
- <6>[ 3.792074@2] ADC Keypad Driver init.
- <6>[ 3.795733@2] GPIO Keypad Driver init.
- <4>[ 3.799413@2] ==gpio_key_probe==
- <4>[ 3.802567@2] gpio request set to High-Z status
- <4>[ 3.807055@2] reg:2620,clearmask=400040,setmask=1
- <4>[ 3.811785@2] reg:2622,clearmask=ff0000,set pin=4
- <4>[ 3.816443@2] reg:2623,clearmask=7000000,setmask=7
- <4>[ 3.821195@2] reg:2620,clearmask=800080,setmask=10001
- <4>[ 3.826275@2] reg:2622,clearmask=ff000000,set pin=4
- <4>[ 3.831105@2] reg:2623,clearmask=70000000,setmask=7
- <6>[ 3.835958@2] power key(116) registed.
- <4>[ 3.835963@0] key 116 up
- <6>[ 3.842260@2] input: gpio_keypad as /devices/platform/gpio_keypad.4/input/input5
- <4>[ 3.849561@2] gpio keypad register input device completed.
- <4>[ 3.854923@2] gpio keypad major:232
- <4>[ 3.858481@2] spi_nor_init
- <4>[ 3.861103@2] amlogic_spi_nor_probe:
- <4>[ 3.864573@2] amlogic_spi->state_name:default
- <6>[ 3.868947@2] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
- <4>[ 3.876447@2] check_storage_device : spi boot_device_flag : -1
- <4>[ 3.882173@2] spi_nor_probe
- <4>[ 3.884925@2] spi_nor_probe 629 boot_device_flag 1 : do not init spi
- <4>[ 3.891235@2] spi_nor: probe of apollospi:32766 failed with error -12
- <4>[ 3.897605@2] amlogic_spi_nor_probe over
- <4>[ 3.901581@2] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
- <4>[ 3.911311@2] host->base fe108c20
- <4>[ 3.914187@2] pdata->caps 7
- <4>[ 3.916924@2] pdata->caps2 0
- <4>[ 3.919771@2] get property: port, value:0x00000001
- <4>[ 3.926251@2] get property: ocr_avail, value:0x00200000
- <4>[ 3.932715@2] get property: f_min, value:0x000493e0
- <4>[ 3.939176@2] get property: f_max, value:0x02faf080
- <4>[ 3.945652@2] get property: f_max_w, value:0x02faf080
- <4>[ 3.952120@2] get property: max_req_size, value:0x00020000
- <4>[ 3.958582@2] get property: irq_in, value:0x00000003
- <4>[ 3.965058@2] get property: irq_out, value:0x00000005
- <4>[ 3.971529@2] get property: gpio_cd, str:CARD_6
- <4>[ 3.977473@2] get property: pinname, str:sd
- <4>[ 3.983089@2] get property: jtag_pin, str:CARD_0
- <4>[ 3.989029@2] get property: card_type, value:0x00000005
- <4>[ 3.995505@2] get property: gpio_dat3, str:CARD_4
- <4>[ 4.001467@2] normal card in
- <4>[ 4.040244@2] reg:2620,clearmask=80008,setmask=10001
- <4>[ 4.040282@2] reg:2621,clearmask=ff000000,set pin=64
- <4>[ 4.044565@2] reg:2623,clearmask=7000,setmask=7
- <4>[ 4.049051@2] reg:2620,clearmask=200020,setmask=1
- <4>[ 4.053794@2] reg:2622,clearmask=ff00,set pin=64
- <4>[ 4.058365@2] reg:2623,clearmask=700000,setmask=7
- <4>[ 4.063189@2] pdata->caps 10f
- <4>[ 4.065974@2] pdata->caps2 0
- <4>[ 4.068802@2] get property: port, value:0x00000000
- <4>[ 4.075281@2] get property: ocr_avail, value:0x00200000
- <4>[ 4.081759@2] get property: f_min, value:0x000493e0
- <4>[ 4.088220@2] get property: f_max, value:0x02faf080
- <4>[ 4.094696@2] get property: max_req_size, value:0x00020000
- <4>[ 4.101166@2] get property: pinname, str:sdio
- <4>[ 4.106934@2] get property: card_type, value:0x00000003
- <6>[ 4.113423@3] sd: new high speed SDHC card at address 0007, clock 35416666, 4-bit-bus-width
- <6>[ 4.121962@3] mmcblk0: sd:0007 SL16G 14.4 GiB
- <6>[ 4.151055@3] mmcblk0: p1
- <4>[ 4.210219@2] [aml_sdio_probe] aml_sdio_probe() success!
- <4>[ 4.211439@2] host->base fe108e00
- <4>[ 4.213216@2] pdata->caps 80000547
- <4>[ 4.216533@2] pdata->caps2 20
- <4>[ 4.219464@2] get property: port, value:0x00000005
- <4>[ 4.225945@2] get property: ocr_avail, value:0x00200080
- <4>[ 4.232407@2] get property: f_min, value:0x000493e0
- <4>[ 4.238869@2] get property: f_max, value:0x05f5e100
- <4>[ 4.245349@2] get property: max_req_size, value:0x00020000
- <4>[ 4.251817@2] get property: pinname, str:emmc
- <4>[ 4.257586@2] get property: card_type, value:0x00000001
- <4>[ 4.264062@2] get property: gpio_dat3, str:BOOT_3
- <4>[ 4.270006@2] [is_emmc_exist] host->storage_flag=1, POR_BOOT_VALUE=7
- <4>[ 4.276308@2] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config!
- <4>[ 4.340216@2] [aml_sdhc_probe] aml_sdhc_probe() success!
- <6>[ 4.340306@2] [dsp]DSP start addr 0xc5e00000
- <6>[ 4.344128@2] [dsp]register dsp to char divece(257)
- <6>[ 4.349160@2] amlogic audio spdif interface device init!
- <4>[ 4.354268@2] name=nand_key nand_key
- <4>[ 4.358887@2] register_aes_algorithm:488,new way
- <4>[ 4.362759@2] key name:keyexample, key data:1234567890
- <6>[ 4.367985@2] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
- <6>[ 4.375261@2] vdin_drv_init: major 230
- <6>[ 4.377288@2] vdin0 mem_start = 0x1ca00000, mem_size = 0x100000
- <6>[ 4.383031@2] vdin_drv_probe: driver initialized ok
- <6>[ 4.387940@2] vdin1 mem_start = 0x1cb00000, mem_size = 0x1000000
- <6>[ 4.393810@2] vdin_drv_probe: driver initialized ok
- <4>[ 4.398680@2] amvdec_656in module: init.
- <4>[ 4.402513@2] amvdec_656in_init_module:major 229
- <4>[ 4.407285@2] amvdec_656in probe ok.
- <6>[ 4.410788@2] [isp..]isp_probe isp probe ok.
- <6>[ 4.415400@2] amaudio2: device amaudio2 created
- <4>[ 4.419403@1] hdmitx: hdcp: start hdcp
- <4>[ 4.419480@2] amlogic rfkill init
- <7>[ 4.419518@2] enter bt_probe of_node
- <4>[ 4.419523@2] not get gpio_en
- <4>[ 4.419525@2] not get gpio_wake
- <4>[ 4.432383@1] ddc: w: invalid cmd 0x2
- <4>[ 4.435967@1] ddc: unknown cmd: 0x2
- <4>[ 4.439417@1] hdmitx: system: gate/pwr cmd: 4
- <4>[ 4.443764@1] hdmitx: system: gate/pwr cmd: 6
- <4>[ 4.448043@1] hdmitx: system: already configure PACKET_CONTROL
- <4>[ 4.550751@2] wifi_request_32k_clk : no 32k pinsecure_monitor_init:192
- <4>[ 4.551629@2] secure_monitor_start:69
- <4>[ 4.555503@2] usb_audio_id_card_init, id_string== USB-22a12801
- <6>[ 4.593369@0] usbcore: registered new interface driver snd-usb-audio
- <4>[ 4.594312@0] enter rt5616_modinit
- <4>[ 4.597652@0] == ES8323 == es8323_modinit()
- <7>[ 4.602009@0] enter aml_i2s_dai_probe
- <6>[ 4.602016@0] i2s get no clk src setting in dts, use the default mpll 0
- <6>[ 4.608260@0] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
- <7>[ 4.616242@0] enter aml_pcm_dai_probe
- <6>[ 4.616307@0] [aml-spdif-dai]enter aml_dai_spdif_init
- <6>[ 4.621112@0] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
- <4>[ 4.628149@0] audio_set_958_clk, freq=4,
- <4>[ 4.632085@0] IEC958 16bit
- <4>[ 4.634722@0] hdmitx: audio: aout notify rate 48000
- <4>[ 4.639541@0] hdmitx: audio: aout notify size 16
- <4>[ 4.644162@0] hdmitx: audio: aout notify format CT_PCM
- <4>[ 4.649212@0] hdmitx: audio: audio channel num is 1
- <4>[ 4.654057@0] hdmitx: audio: SPDIF
- <4>[ 4.657428@0] hdmitx: audio: current VIC: 31
- <4>[ 4.661630@0] hdmitx: audio: audio sample rate: 3
- <4>[ 4.666280@0] hdmitx: audio: set audio N para
- <4>[ 4.670625@0] hdmitx: audio: PCM out to HDMI
- <4>[ 4.674828@0] hdmitx: audio: i2s_to_spdif_flag:1
- <4>[ 4.679468@0] hdmitx: audio: Enable audio spdif to HDMI
- <4>[ 4.684685@0] hdmitx: audio: Audio Type: PCM
- <4>[ 4.688941@0] hdmitx: audio: set audio param
- <6>[ 4.693177@0] [aml-spdif-dai]aml_spdif_probe
- <4>[ 4.697452@0] test codec dummy_codec
- <4>[ 4.700883@0] test_codec_of_node, node dummy_codec disable
- <4>[ 4.706311@0] no external codec, using aml default codec
- <4>[ 4.711684@0] enter spdif_dit_probe
- <6>[ 4.715099@0] aml_spdif_unmute
- <4>[ 4.718346@0] codec_name = aml_m8_codec.0
- <7>[ 4.722680@2] enter aml_set_bias_level level: 1
- <7>[ 4.722691@2] enter aml_set_bias_level level: 1
- <7>[ 4.722695@2] enter aml_set_bias_level level: 2
- <7>[ 4.722748@0] enter aml_asoc_init
- <6>[ 4.722773@0] p_aml_audio->hp_disable=1
- <4>[ 4.725979@0] falied to get spk event delay time paraments from dts file
- <6>[ 4.732647@0] spk_event delay_time = 0
- <4>[ 4.737422@0] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288
- <4>[ 4.745576@0] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536
- <6>[ 4.753980@0] aml_snd_m8 aml_m8_sound_card.3: AML-M8 <-> aml-i2s-dai.0 mapping ok
- <7>[ 4.761520@1] enter aml_set_bias_level level: 1
- <7>[ 4.761527@1] enter aml_set_bias_level level: 2
- <4>[ 4.762748@0] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288
- <4>[ 4.770677@0] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2f460000, size=65536
- <6>[ 4.779052@0] aml_snd_m8 aml_m8_sound_card.3: dit-hifi <-> aml-spdif-dai.0 mapping ok
- <7>[ 4.786981@2] enter aml_set_bias_level level: 1
- <7>[ 4.786988@2] enter aml_set_bias_level level: 2
- <7>[ 4.787085@1] enter aml_set_bias_level level: 1
- <7>[ 4.787092@1] enter aml_set_bias_level level: 2
- <7>[ 4.787590@1] enter aml_set_bias_level level: 1
- <7>[ 4.787596@1] enter aml_set_bias_level level: 2
- <4>[ 4.787674@0] -----ext_codec=0---
- <4>[ 4.790163@0] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
- <6>[ 4.796231@0] GACT probability NOT on
- <6>[ 4.799721@0] Mirror/redirect action on
- <6>[ 4.803540@0] u32 classifier
- <6>[ 4.806341@0] Actions configured
- <6>[ 4.809898@0] Netfilter messages via NETLINK v0.30.
- <6>[ 4.814785@0] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 4.821380@0] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 4.826418@0] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 4.833492@0] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 4.839685@0] xt_time: kernel timezone is -0000
- <6>[ 4.844009@0] ipip: IPv4 over IPv4 tunneling driver
- <6>[ 4.849151@0] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 4.854293@0] arp_tables: (C) 2002 David S. Miller
- <6>[ 4.858912@0] TCP: cubic registered
- <6>[ 4.862368@0] Initializing XFRM netlink socket
- <6>[ 4.867054@0] NET: Registered protocol family 10
- <6>[ 4.871933@0] mip6: Mobile IPv6
- <6>[ 4.874430@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 4.880078@0] sit: IPv6 over IPv4 tunneling driver
- <6>[ 4.885392@0] NET: Registered protocol family 17
- <6>[ 4.889260@0] NET: Registered protocol family 15
- <5>[ 4.893910@0] Bridge firewalling registered
- <6>[ 4.898063@0] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 4.903013@0] Bluetooth: RFCOMM socket layer initialized
- <6>[ 4.908203@0] Bluetooth: RFCOMM ver 1.11
- <6>[ 4.912142@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 4.917518@0] Bluetooth: BNEP filters: protocol multicast
- <6>[ 4.922920@0] Bluetooth: BNEP socket layer initialized
- <6>[ 4.927955@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 4.934053@0] Bluetooth: HIDP socket layer initialized
- <6>[ 4.939154@0] l2tp_core: L2TP core driver, V2.0
- <6>[ 4.943637@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- <6>[ 4.948477@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- <6>[ 4.954248@0] l2tp_netlink: L2TP netlink interface
- <6>[ 4.958966@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- <6>[ 4.964987@0] l2tp_debugfs: L2TP debugfs support
- <6>[ 4.969527@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- <6>[ 4.976166@0] NET: Registered protocol family 35
- <5>[ 4.980778@0] Key type dns_resolver registered
- <6>[ 4.986030@0] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- <5>[ 4.992896@0] Registering SWP/SWPB emulation handler
- <4>[ 4.997727@0] enter meson_pm_init
- <6>[ 5.001189@0] enter meson_pm_probe!
- <6>[ 5.004458@0] meson_pm_probe done !
- <6>[ 5.008437@0] file system registered
- <6>[ 5.012142@0] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 5.018433@0] android_usb gadget: Number of LUNs=2
- <6>[ 5.023237@0] lun0: LUN: removable file: (no medium)
- <6>[ 5.028178@0] lun1: LUN: removable file: (no medium)
- <6>[ 5.033432@0] android_usb gadget: android_usb ready
- <6>[ 5.038436@0] aml_rtc rtc.0: setting system clock to 2015-12-25 13:16:33 UTC (1451049393)
- <6>[ 5.046200@0] ### dt-test ### No testcase data in device tree; not running tests
- <4>[ 5.053593@0] meson_cpufreq: no voltage_control prop
- <4>[ 5.058365@0] voltage_control = 0
- <4>[ 5.062078@0] hdmitx: cec: CEC init
- <6>[ 5.065260@0] input: cec_input as /devices/virtual/input/input6
- <4>[ 5.076422@0] hdmitx: cec: CEC task process
- <4>[ 5.071080@1] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
- <6>[ 5.080562@1] ALSA device list:
- <6>[ 5.083800@1] #0: MHTF MHTF at usb-lm1-1.2, full speed
- <6>[ 5.089060@1] #1: AML-M8AUDIO
- <7>[ 5.092269@1] config uart_ao_ttyS0:: Character length 8bits/char
- <6>[ 5.110216@1] Changing uart_ao_ttyS0: baud from 0 to 115200
- <6>[ 5.130371@1] Freeing unused kernel memory: 368K (c0af7000 - c0b53000)
- <14>[ 5.153222@2] init: command 'loglevel 7' action=early-init status=0 (init.amlogic.board.rc:4)
- <4>[ 5.157992@2] aml_nftl_dev: module license 'Proprietary' taints kernel.
- <4>[ 5.162665@2] Disabling lock debugging due to kernel taint
- <4>[ 5.168772@2] boot_device_flag : 1
- <4>[ 5.171460@2] register_ntd_blktrans start
- <4>[ 5.175408@2] ntd device 250!
- <4>[ 5.178338@2] ntd->name: nfcache
- <4>[ 5.181577@2] adjust_block_num : 4,reserved_block_ratio 10
- <4>[ 5.186964@2] nftl version 150330d
- <4>[ 5.190337@2] nftl build Mar 30 2015_19:39:32
- <4>[ 5.194645@2] nftl part attr 0
- <4>[ 5.198760@2] nftl start:76,12, init flag 0
- <4>[ 5.201939@2] first
- <4>[ 5.277433@2] average_erase_count:0
- <4>[ 5.277456@2] second 15,64
- <4>[ 5.277965@2] part->max_discard_block = 4
- <4>[ 5.297778@2] current_block1:59
- <4>[ 5.325056@2] recover_current_block_mapping invalid page data!!
- <4>[ 5.326388@2] recover_current_block_mapping invalid page data!!
- <4>[ 5.332251@2] recover_current_block_mapping invalid page data!!
- <4>[ 5.338117@2] recover_current_block_mapping invalid page data!!
- <4>[ 5.343993@2] recover_current_block_mapping invalid page data!!
- <4>[ 5.349851@2] recover_current_block_mapping invalid page data!!
- <4>[ 5.355630@2] all discard block full!!
- <4>[ 5.358363@2] free block cnt = 64
- <4>[ 5.361650@2] new current block is 61
- <4>[ 5.633368@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
- <4>[ 6.248319@0] recover_current_block_mapping : fill the current block, from page 255
- <4>[ 6.250366@0] total discard page count is 0
- <4>[ 6.254459@0] create_part_list:1238,current_used_discard_block=60,current_discard_block_used_count=37
- <4>[ 6.263855@0] unmappig_pages=15812,discarded_pages=0,mapping_pages=572
- <4>[ 6.270070@0] nftl ok!
- <4>[ 6.273229@0] Enable QUEUE_FLAG_DISCARD for NFTL
- <4>[ 6.277589@0] aml_nftl_add_ntd ok
- <4>[ 6.280281@0] ntd device 250!
- <4>[ 6.283183@0] ntd->name: nfcode
- <4>[ 6.286305@0] adjust_block_num : 4,reserved_block_ratio 10
- <4>[ 6.291770@0] nftl version 150330d
- <4>[ 6.295084@0] nftl build Mar 30 2015_19:39:32
- <4>[ 6.299418@0] nftl part attr 0
- <4>[ 6.304844@0] nftl start:164,19, init flag 0
- <4>[ 6.306836@0] first
- <4>[ 6.386536@0] found discard block:82
- <4>[ 6.462568@0] average_erase_count:1
- <4>[ 6.462587@0] second 156,145
- <4>[ 6.463267@0] part->max_discard_block = 4
- <4>[ 6.632786@0] current_block1:132
- <4>[ 6.662257@0] recover_current_block_mapping invalid page data!!
- <4>[ 6.663600@0] recover_current_block_mapping invalid page data!!
- <4>[ 6.669471@0] recover_current_block_mapping invalid page data!!
- <4>[ 6.675333@0] recover_current_block_mapping invalid page data!!
- <4>[ 6.681222@0] recover_current_block_mapping invalid page data!!
- <4>[ 6.687088@0] recover_current_block_mapping invalid page data!!
- <4>[ 6.693807@0] currnet_discard_block1:82
- <4>[ 6.709367@0] reach the last discard page:10
- <4>[ 6.709426@0] free block cnt = 66
- <4>[ 6.711301@0] new current block is 131
- <4>[ 6.981875@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
- <4>[ 7.596494@0] recover_current_block_mapping : fill the current block, from page 255
- <4>[ 7.598490@0] total discard page count is 10
- <4>[ 7.602736@0] create_part_list:1238,current_used_discard_block=82,current_discard_block_used_count=83
- <4>[ 7.612322@0] unmappig_pages=16196,discarded_pages=1040,mapping_pages=19884
- <4>[ 7.618759@0] nftl ok!
- <4>[ 7.622084@0] Enable QUEUE_FLAG_DISCARD for NFTL
- <4>[ 7.626197@0] Enable QUEUE_FLAG_DISCARD for NFTL
- <4>[ 7.630795@0] Enable QUEUE_FLAG_DISCARD for NFTL
- <4>[ 7.635275@0] Enable QUEUE_FLAG_DISCARD for NFTL
- <4>[ 7.639880@0] Enable QUEUE_FLAG_DISCARD for NFTL
- <4>[ 7.644441@0] aml_nftl_add_ntd ok
- <4>[ 7.647223@0] ntd device 250!
- <4>[ 7.650153@0] ntd->name: nfdata
- <4>[ 7.653315@0] adjust_block_num : 4,reserved_block_ratio 10
- <4>[ 7.658694@0] nftl version 150330d
- <4>[ 7.662112@0] nftl build Mar 30 2015_19:39:32
- <4>[ 7.666420@0] nftl part attr 0
- <4>[ 7.680482@0] size_in_blk 758; total_block 732;
- <4>[ 7.680506@0] nftl start:732,71, init flag 0
- <4>[ 7.684407@0] first
- <4>[ 8.274697@0] found discard block:645
- <4>[ 8.372484@0] average_erase_count:7
- <4>[ 8.372509@0] second 732,661
- <4>[ 8.373187@0] part->max_discard_block = 4
- <4>[ 9.159394@0] current_block1:422
- <4>[ 9.249700@0] recover_current_block_mapping invalid page data!!
- <4>[ 9.251027@0] recover_current_block_mapping invalid page data!!
- <4>[ 9.256912@0] recover_current_block_mapping invalid page data!!
- <4>[ 9.262810@0] recover_current_block_mapping invalid page data!!
- <4>[ 9.268632@0] recover_current_block_mapping invalid page data!!
- <4>[ 9.274526@0] recover_current_block_mapping invalid page data!!
- <4>[ 9.281237@0] currnet_discard_block1:645
- <4>[ 9.326626@0] reach the last discard page:38
- <4>[ 9.327196@0] free block cnt = 26
- <4>[ 9.328536@0] new current block is 452
- <4>[ 9.677257@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
- <4>[ 10.214246@0] recover_current_block_mapping : fill the current block, from page 255
- <4>[ 10.216247@0] total discard page count is 38
- <4>[ 10.220494@0] create_part_list:1238,current_used_discard_block=645,current_discard_block_used_count=105
- <4>[ 10.231801@0] unmappig_pages=104714,discarded_pages=3292,mapping_pages=61210
- <4>[ 10.236774@0] nftl ok!
- <4>[ 10.240164@0] Enable QUEUE_FLAG_DISCARD for NFTL
- <4>[ 10.244229@0] aml_nftl_add_ntd ok
- <4>[ 10.246993@0] init_aml_nftl end
- <14>[ 10.250183@0] init: command 'insmod /boot/aml_nftl_dev.ko' action=early-init status=0 (init.amlogic.board.rc:5)
- <4>[ 10.261367@0] OTZ driver version: 3.0.0
- <14>[ 10.264361@0] init: command 'insmod /boot/otz_client.ko' action=early-init status=0 (init.amlogic.board.rc:6)
- <14>[ 10.273823@0] init: command 'symlink /dev/block/mtdblock1 /dev/block/ubootenv' action=early-init status=0 (init.amlogic.board.rc:8)
- <4>[ 10.290454@0] gpu cooling register okay with err=0
- <4>[ 10.290614@0] gpu core cooling register okay with err=0
- <4>[ 10.295535@0] Mali: Mali device driver loaded
- <14>[ 10.299845@0] init: command 'insmod /boot/mali.ko mali_debug_level=2 mali_shared_mem_size=0x40000000' action=early-init status=0 (init.amlogic.board.rc:12)
- <14>[ 10.313532@0] init: processing action 0xb6490730 (wait_for_coldboot_done)
- <14>[ 10.320234@0] init: wait for /dev/.coldboot_done
- <14>[ 10.324837@0] init: command 'wait_for_coldboot_done' action=wait_for_coldboot_done status=0 ((null):0)
- <14>[ 10.334055@0] init: processing action 0xb6490760 (mix_hwrng_into_linux_rng)
- <14>[ 10.341046@0] init: Mixed 512 bytes from /dev/hw_random into /dev/urandominit: command 'mix_hwrng_into_linux_rng' action=mix_hwrng_into_linux_rng status=0 ((null):0)
- <14>[ 10.355597@0] init: processing action 0xb6490790 (keychord_init)
- <14>[ 10.361528@0] init: command 'keychord_init' action=keychord_init status=0 ((null):0)
- <14>[ 10.369210@0] init: processing action 0xb64907c0 (console_init)
- <7>[ 10.375166@0] config uart_ao_ttyS0:: Character length 8bits/char
- <14>[ 10.375222@0] init: command 'console_init' action=console_init status=0 ((null):0)
- <14>[ 10.377138@0] init: processing action 0xb64460a0 (init)
- <14>[ 10.382367@0] init: command 'sysclktz 0' action=init status=0 (/init.rc:33)
- <11>[ 10.392098@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
- <11>[ 10.397351@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
- <11>[ 10.407255@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
- <11>[ 10.415316@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
- <4>[ 10.425971@1] aml_nftl_open ok!
- <4>[ 10.429384@1] force enable DISCARD here for ext4 fs
- <4>[ 10.440169@1] checked enable EXT4 DISCARD here
- <6>[ 10.440197@1] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)
- <14>[ 10.446977@1] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0
- <4>[ 10.454468@1] blktrans_ioctl -cmd: 125d,801c0204,64
- <4>[ 10.459408@1] aml_nftl_open ok!
- <4>[ 10.463569@1] force enable DISCARD here for ext4 fs
- <4>[ 10.467274@1] EXT4-fs (data): Ignoring removed nomblk_io_submit option
- <4>[ 10.486914@1] checked enable EXT4 DISCARD here
- <6>[ 10.486942@1] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <14>[ 10.495942@1] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0
- <14>[ 10.507481@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/data
- <4>[ 10.581820@3] aml_nftl_open ok!
- <4>[ 10.581898@3] aml_nftl_open ok!
- <14>[ 10.594969@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- <14>[ 10.595029@1] e2fsck: /dev/block/data: clean, 17728/338688 files, 437545/1353728 blocks
- <4>[ 10.602152@1] aml_nftl_open ok!
- <4>[ 10.606235@1] force enable DISCARD here for ext4 fs
- <4>[ 10.609916@1] EXT4-fs (data): Ignoring removed nomblk_io_submit option
- <4>[ 10.621690@1] checked enable EXT4 DISCARD here
- <6>[ 10.621717@1] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
- <14>[ 10.630555@1] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0
- <4>[ 10.637769@1] aml_nftl_open ok!
- <4>[ 10.641910@1] force enable DISCARD here for ext4 fs
- <4>[ 10.645621@1] EXT4-fs (cache): Ignoring removed nomblk_io_submit option
- <4>[ 10.665651@1] checked enable EXT4 DISCARD here
- <6>[ 10.665680@1] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <14>[ 10.674773@1] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0
- <14>[ 10.684252@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache
- <4>[ 10.692136@3] aml_nftl_open ok!
- <4>[ 10.692212@3] aml_nftl_open ok!
- <14>[ 10.702831@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- <14>[ 10.702875@1] e2fsck: /dev/block/cache: clean, 93/32768 files, 4312/131072 blocks
- <4>[ 10.709458@1] aml_nftl_open ok!
- <4>[ 10.713614@1] force enable DISCARD here for ext4 fs
- <4>[ 10.717253@1] EXT4-fs (cache): Ignoring removed nomblk_io_submit option
- <4>[ 10.729472@1] checked enable EXT4 DISCARD here
- <6>[ 10.729500@1] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
- <14>[ 10.738181@1] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0
- <6>[ 10.821244@1] binder: 128:128 transaction failed 29189, size 0-0
- <4>[ 10.828861@0] buf[0]=ef,buf[1]=af,err=4
- <4>[ 10.828892@0] M8M2:adc=383,TS_C=15,flag=1
- <4>[ 10.831141@0] efuse_flag=a
- <4>[ 10.833725@0] amlogic_thermal_probe, this chip is trimmed, use thermal
- <6>[ 10.840296@0] amlogic-thermal aml_thermal: amlogic thermal probe start
- <4>[ 10.846697@0] #thermal-cells=7
- <4>[ 10.849674@0] keep_mode is disabled
- <4>[ 10.853216@0] pdata->temp_trip_count=4
- <4>[ 10.856834@0] temperature=70 on trip point=0
- <4>[ 10.861178@0] fixing high_freq=1608001 to 1608000 at trip point 0,level=2
- <4>[ 10.867788@0] fixing low_freq=1608001 to 1608000 at trip point 0,level=2
- <4>[ 10.874466@0] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
- <4>[ 10.880853@0] cpu[0] core num==3
- <4>[ 10.884053@0] gpu[0] core num==5
- <4>[ 10.887192@0] temperature=80 on trip point=1
- <4>[ 10.891493@0] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
- <4>[ 10.898173@0] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
- <4>[ 10.904783@0] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
- <4>[ 10.911264@0] cpu[1] core num==2
- <4>[ 10.914377@0] gpu[1] core num==4
- <4>[ 10.917573@0] temperature=90 on trip point=2
- <4>[ 10.921810@0] fixing high_freq=800001 to 696000 at trip point 2,level=11
- <4>[ 10.928422@0] fixing low_freq=800001 to 696000 at trip point 2,level=11
- <4>[ 10.934973@0] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
- <4>[ 10.941423@0] cpu[2] core num==2
- <4>[ 10.944548@0] gpu[2] core num==3
- <4>[ 10.947740@0] temperature=110 on trip point=3
- <4>[ 10.952128@0] fixing high_freq=-1 to -22 at trip point 3,level=-1
- <4>[ 10.958115@0] fixing low_freq=-1 to -22 at trip point 3,level=-1
- <4>[ 10.964043@0] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
- <4>[ 10.970327@0] cpu[3] core num==-1
- <38>[ 10.970364@2] logd.auditd: start
- <4>[ 10.976747@0] gpu[3] core num==-1
- <4>[ 10.980008@0] idle interval=1000
- <4>[ 10.983250@0] pdata->name:aml_thermal, pdata:eb8c7200
- <4>[ 10.988214@0] amlogic_thermal_init_from_dts, 998
- <4>[ 10.992839@0] amlogic_thermal_initialize, 1014, pdata:eb8c7200
- <4>[ 10.999278@0] tmp_trip[0].cpu_core_upper=1
- <4>[ 11.002683@0] tmp_trip[1].cpu_core_upper=2
- <4>[ 11.006717@0] tmp_trip[2].cpu_core_upper=2
- <4>[ 11.010756@0] tmp_trip[3].cpu_core_upper=-1
- <6>[ 11.014897@0] aml_thermal bind thermal-cpucore-0 okay !
- <6>[ 11.020069@0] aml_thermal bind thermal-cpufreq-0 okay !
- <4>[ 11.025270@0] tmp_trip[0].gpu_core_upper=1
- <4>[ 11.029293@0] tmp_trip[1].gpu_core_upper=2
- <4>[ 11.033353@0] tmp_trip[2].gpu_core_upper=3
- <4>[ 11.037407@0] tmp_trip[3].gpu_core_upper=-1
- <6>[ 11.041561@0] aml_thermal bind thermal-gpucore-0 okay !
- <4>[ 11.046715@0] pdata->tmp_trip[0].gpu_lower_level=1
- <4>[ 11.051478@0] pdata->tmp_trip[0].gpu_upper_level=1
- <4>[ 11.056210@0] pdata->tmp_trip[1].gpu_lower_level=2
- <4>[ 11.060973@0] pdata->tmp_trip[1].gpu_upper_level=2
- <4>[ 11.065677@0] pdata->tmp_trip[2].gpu_lower_level=3
- <4>[ 11.072236@0] pdata->tmp_trip[2].gpu_upper_level=3
- <4>[ 11.075182@0] pdata->tmp_trip[3].gpu_lower_level=-1
- <4>[ 11.079987@0] pdata->tmp_trip[3].gpu_upper_level=-1
- <6>[ 11.084897@0] aml_thermal bind thermal-gpufreq-0 okay !
- <6>[ 11.090656@0] amlogic: Kernel Thermal management registered
- <6>[ 11.095530@0] amlogic-thermal aml_thermal: amlogic thermal probe done
- <4>[ 11.106090@0] vfm_map_store:rm default
- <4>[ 11.106167@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- <11>[ 11.112570@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
- <11>[ 11.122071@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
- <11>[ 11.134480@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
- <11>[ 11.144342@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
- <11>[ 11.166040@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
- <11>[ 11.166048@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
- <11>[ 11.166056@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
- <11>[ 11.166061@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
- <11>[ 11.167287@0] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
- <11>[ 11.167306@0] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
- <3>[ 11.215480@0] android_usb: already disabled
- <6>[ 11.219308@0] read descriptors
- <6>[ 11.219313@0] read strings
- <6>[ 11.219330@0] mtp_bind_config
- <4>[ 11.219366@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode
- <4>[ 11.219366@0]
- <7>[ 11.243322@2] config uart_ao_ttyS0:: Character length 8bits/char
- <4>[ 11.271894@2] cur_mode = 0
- <4>[ 11.271919@2] [0x0] = 0x1dd0190
- <4>[ 11.272081@2] [0x4] = 0xf800ca
- <6>[ 11.277268@2] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
- <4>[ 11.282671@2] [0x8] = 0x82006e
- <4>[ 11.285623@2] [0xc] = 0x3c0030
- <4>[ 11.289835@2] [0x10] = 0x30fa0013
- <4>[ 11.291968@2] [0x18] = 0x6f19000
- <4>[ 11.295123@2] [0x1c] = 0x9f40
- <4>[ 11.298053@2] [0x20] = 0x0
- <4>[ 11.300739@2] [0x24] = 0x0
- <4>[ 11.303401@2] [0x28] = 0x0
- <4>[ 11.307333@2] set_remote_mode[69]
- <11>[ 11.324135@2] dig: data_integrity_guard main!
- <4>[ 11.331872@3] tvmode set to 1080p50hz
- <4>[ 11.331904@3] don't set the same mode as current.
- <11>[ 11.372078@2] init: untracked pid 177 exited with status 0
- <11>[ 11.373037@2] init: untracked pid 181 exited with status 1
- <4>[ 11.401739@3] blktrans_ioctl -cmd: 125d,801c0204,64
- <4>[ 11.401743@0] blktrans_ioctl -cmd: 125d,801c0204,64
- <4>[ 11.416606@0] buf=0
- <4>[ 11.418124@0] IEC958_mode_raw=0
- <4>[ 11.421571@0] osd0=>x:0 ,y:0,w:1920,h:1080
- <4>[ 11.421571@0] osd1=> x:0,y:0,w:18,h:18
- <6>[ 11.430627@3] EXT4-fs (system): re-mounted. Opts: (null)
- <6>[ 11.430834@0] EXT4-fs (system): re-mounted. Opts: (null)
- <4>[ 11.439728@0] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
- <4>[ 11.449353@1] osd[1].scaledata: 1920 1920 1080 1080
- <4>[ 11.450463@1] osd[1].pandata: 0 0 0 0
- <6>[ 11.587763@2] EXT4-fs (system): re-mounted. Opts: (null)
- <6>[ 11.588227@3] EXT4-fs (system): re-mounted. Opts: (null)
- <6>[ 11.629862@1] EXT4-fs (system): re-mounted. Opts: (null)
- <6>[ 11.632518@2] EXT4-fs (system): re-mounted. Opts: (null)
- <11>[ 11.643063@1] init: untracked pid 175 exited with status 1
- <11>[ 11.710642@1] init: untracked pid 253 exited with status 0
- <11>[ 11.822071@1] healthd: No charger supplies found
- <12>[ 11.822112@1] healthd: No battery devices found
- <4>[ 12.180720@2] IRQ94 no longer affine to CPU2
- <5>[ 12.180973@1] CPU2: shutdown
- <4>[ 12.330768@3] IRQ95 no longer affine to CPU3
- <5>[ 12.331004@1] CPU3: shutdown
- <11>[ 12.554064@1] init: untracked pid 381 exited with status 1
- <6>[ 12.569840@0] EXT4-fs (system): re-mounted. Opts: (null)
- <4>[ 12.596661@0] blktrans_ioctl -cmd: 125d,801c0204,64
- <6>[ 12.597066@0] EXT4-fs (system): re-mounted. Opts: (null)
- <6>[ 12.680994@0] EXT4-fs (system): re-mounted. Opts: (null)
- <6>[ 12.729723@0] EXT4-fs (system): re-mounted. Opts: (null)
- <11>[ 12.760726@1] init: untracked pid 383 exited with status 1
- <4>[ 13.090509@1] write pen_release: 2
- <4>[ 13.091293@2] CPU2: Booted secondary processor
- <7>[ 14.210249@1] -----hotplug:2
- <4>[ 14.270520@2] IRQ94 no longer affine to CPU2
- <5>[ 14.270721@1] CPU2: shutdown
- <4>[ 16.210354@1] write pen_release: 2
- <4>[ 16.211040@2] CPU2: Booted secondary processor
- <4>[ 17.150653@2] IRQ94 no longer affine to CPU2
- <5>[ 17.150926@1] CPU2: shutdown
- <6>[ 18.355189@0] request_suspend_state: wakeup (3->0) at 18274973000 (2015-12-25 13:16:46.816751000 UTC)
- <4>[ 18.358748@0] request_suspend_state,169,old_sleep=0,new_state=0
- <6>[ 32.737498@0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
- <6>[ 32.739202@0] lowmemorykiller: oom_adj 0 => oom_score_adj 0
- <6>[ 32.744757@0] lowmemorykiller: oom_adj 1 => oom_score_adj 58
- <6>[ 32.750336@0] lowmemorykiller: oom_adj 2 => oom_score_adj 117
- <6>[ 32.756022@0] lowmemorykiller: oom_adj 3 => oom_score_adj 176
- <6>[ 32.761731@0] lowmemorykiller: oom_adj 9 => oom_score_adj 529
- <6>[ 32.767402@0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
- <6>[ 33.827634@1] acc_open
- <6>[ 33.827663@1] acc_release
- <4>[ 34.108542@1] eth0: device MAC address e8:18:63:50:9f:3f
- <4>[ 34.125509@1] mask interrupts MMC
- <4>[ 34.125513@1] mask interrupts MMC
- <4>[ 34.125518@1] mask interrupts MMC
- <4>[ 34.125547@1] stmmac_open: failed PTP initialisation
- <4>[ 34.127634@0] dhd_module_init: Enter
- <4>[ 34.127637@0] wifi_setup_dt
- <4>[ 34.127650@0] wifi_request_32k_clk : no 32k pininterrupt_pin(133) : (null)
- <4>[ 34.127667@0] reg:2620,clearmask=100010,setmask=0
- <4>[ 34.127669@0] reg:2622,clearmask=ff,set pin=133
- <4>[ 34.127671@0] reg:2623,clearmask=70000,setmask=4
- <4>[ 34.127673@0] interrupt_pin(133) : sdio_wifi
- <4>[ 34.127675@0] power_on_pin(6) : (null)
- <4>[ 34.127680@0] power_on_pin(6) : sdio_wifi
- <4>[ 34.127682@0] power_on_pin2(123) : (null)
- <4>[ 34.127687@0] power_on_pin2(123) : sdio_wifi
- <4>[ 34.127712@0] WIFI Disable! 6
- <4>[ 34.380603@0] WIFI Enable! 6
- <4>[ 34.410302@1] write pen_release: 2
- <4>[ 34.410955@2] CPU2: Booted secondary processor
- <4>[ 35.330988@0] avc open
- <4>[ 35.337889@0] amvenc_avc check CMA pool sucess, max instance: 2.
- <4>[ 35.339575@0] amvenc_avc_open: allocating phys 2cc00000, size 18432k, wq:ea76e800.
- <4>[ 35.345998@0] amvenc_avc memory config sucess, buff start:0x2cc00000, size is 0x1200000, wq:ea76e800.
- <4>[ 35.355420@0] avc release, wq:ea76e800
- <4>[ 35.358863@0] remove encode_work_queue ea76e800 sucess, destroy_encode_work_queue line 2408.
- <4>[ 35.372848@0] ionvideo open
- <4>[ 35.372890@0] ionvideo_stop_generating!!!!
- <4>[ 35.374093@0] ionvideo release
- <4>[ 35.379972@0] ionvideo open
- <4>[ 35.380014@0] ionvideo_stop_generating!!!!
- <4>[ 35.384088@0] ionvideo release
- <4>[ 35.391048@0] ionvideo open
- <4>[ 35.391060@0] ionvideo_stop_generating!!!!
- <4>[ 35.391069@0] ionvideo release
- <4>[ 35.400531@0] ionvideo open
- <4>[ 35.401880@0] ionvideo_stop_generating!!!!
- <4>[ 35.405950@0] ionvideo release
- <4>[ 35.410566@0] ionvideo open
- <4>[ 35.411732@0] ionvideo_stop_generating!!!!
- <4>[ 35.415931@0] ionvideo release
- <4>[ 35.426502@0] ionvideo open
- <4>[ 35.426538@0] ionvideo_stop_generating!!!!
- <4>[ 35.427793@0] ionvideo release
- <4>[ 35.433669@0] ionvideo open
- <4>[ 35.433704@0] ionvideo_stop_generating!!!!
- <4>[ 35.437635@0] ionvideo release
- <4>[ 35.445731@0] ionvideo open
- <4>[ 35.445770@0] ionvideo_stop_generating!!!!
- <4>[ 35.447458@0] ionvideo release
- <4>[ 35.867978@2] Digital output mode: 0 - PCM
- <4>[ 35.870502@2] Digital output mode: 0 - PCM
- <4>[ 35.899601@2] Digital output mode: 0 - PCM
- <4>[ 36.130760@2] IRQ94 no longer affine to CPU2
- <5>[ 36.131031@1] CPU2: shutdown
- <4>[ 35.580344@1] [aml_sdio_timeout][0;40;33m time_start_cnt:993
- <4>[ 35.580344@1] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940
- <4>[ 35.580344@1] [0m
- <6>[ 36.201080@1] libphy: stmmac-0:01 - Link is Up - 100/Full
- <4>[ 36.534967@1] USB sound usbid = 0x22a12801, card = 0, device = 0**
- <4>[ 37.092404@1] write pen_release: 2
- <4>[ 37.093117@2] CPU2: Booted secondary processor
- <4>[ 37.672103@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- <4>[ 37.673501@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- <4>[ 37.679176@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- <4>[ 37.686089@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- <6>[ 37.734575@0] sdio: new high speed SDIO card at address 0001, clock 35416666, 4-bit-bus-width
- <4>[ 37.874449@2] [sdio_reinit] finish
- <4>[ 37.874679@2] =========== WLAN placed in POWER ON ========
- <4>[ 37.881612@2] bcmsdh_register: Linux Kernel SDIO/MMC Driver
- <4>[ 37.882086@2] dhd_customer_oob_irq_map: customer specific Host GPIO number is (100)
- <4>[ 37.885588@2] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
- <4>[ 37.885974@2] DHD: dongle ram size is set to 294912(orig 294912) at 0x0
- <4>[ 37.886207@2] dhdsdio_probe: Disable prop_txstatus
- <4>[ 37.886250@2] dhd_conf_set_fw_name_by_chip: firmware_path=/etc/wifi/40183/fw_bcm40183b2.bin
- <4>[ 37.887059@2] wl_create_event_handler(): thread:wl_event_handler:450 started
- <4>[ 37.887068@1] tsk Enter, tsk = 0xf3262444
- <4>[ 37.887374@2] dhd_attach(): thread:dhd_watchdog_thread:451 started
- <4>[ 37.888185@2] dhd_attach(): thread:dhd_dpc:452 started
- <4>[ 37.888256@2] dhd_attach(): thread:dhd_sysioc:453 started
- <4>[ 37.889105@0] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- <4>[ 37.890335@1] =========== WLAN placed in RESET ========
- <4>[ 37.890476@1]
- <4>[ 37.890476@1] Dongle Host Driver, version 1.88.45.4 (r420671)
- <4>[ 37.890476@1] Compiled in drivers/net/wireless/bcmdhd on Sep 25 2015 at 18:17:10
- <4>[ 37.890480@1] dhd_module_init: Exit error=0
- <4>[ 38.090115@0] dhd_open: Enter eb6d0000
- <4>[ 38.090159@0] dhd_conf_set_fw_name_by_chip: firmware_path=/etc/wifi/40183/fw_bcm40183b2.bin
- <4>[ 38.099793@0]
- <4>[ 38.099793@0] Dongle Host Driver, version 1.88.45.4 (r420671)
- <4>[ 38.099793@0] Compiled in drivers/net/wireless/bcmdhd on Sep 25 2015 at 18:17:10
- <4>[ 38.114001@0] wl_android_wifi_on in 1
- <4>[ 38.114815@0] wl_android_wifi_on in 2: g_wifi_on=0
- <4>[ 38.119555@0] WIFI Disable! 6
- <4>[ 38.358807@2] WIFI Enable! 6
- <4>[ 38.593887@2] sdio_reset_comm():
- <4>[ 38.617136@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- <4>[ 38.619016@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- <4>[ 38.627415@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- <4>[ 38.631999@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- <4>[ 38.689922@0] [sdio_reinit] finish
- <4>[ 38.697548@2] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- <4>[ 38.799280@0] =========== WLAN going back to live ========
- <4>[ 38.799937@0]
- <4>[ 38.799937@0]
- <4>[ 38.799937@0] dhd_bus_devreset: == WLAN ON ==
- <4>[ 38.809977@0] dhd_bus_devreset called when dongle is not in reset
- <4>[ 38.813542@0] Will call dhd_bus_start instead
- <4>[ 38.830931@0] dhd_conf_set_fw_name_by_chip: firmware_path=/etc/wifi/40183/fw_bcm40183b2.bin
- <4>[ 38.848632@0] dhd_conf_read_config: Ignore config file /system/etc/wifi/config.txt
- <4>[ 38.850626@0] Final fw_path=/etc/wifi/40183/fw_bcm40183b2.bin
- <4>[ 38.859961@0] Final nv_path=/etc/wifi/40183/nvram.txt
- <4>[ 38.861329@0] Final conf_path=/system/etc/wifi/config.txt
- <4>[ 36.610288@0] [aml_sdio_timeout][0;40;33m time_start_cnt:999
- <4>[ 36.610288@0] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940
- <4>[ 36.610288@0] [0m[aml_sdio_timeout][0;40;33m time_start_cnt:998
- <4>[ 36.610288@0] [0m[aml_sdio_print_err][0;40;33m sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=177, pdata->clkc=177, conf->bus_width=0, pdata->width=0, conf=0x416270b1, clock=397940
- <4>[ 36.610288@0] [0m
- <4>[ 38.960483@0] NVRAM version: AP6330_NVRAM_V1.0_20121130
- <4>[ 38.970038@0] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- <4>[ 39.170602@2] IRQ94 no longer affine to CPU2
- <5>[ 39.170862@1] CPU2: shutdown
- <4>[ 39.235083@0] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- <4>[ 39.235248@0] bcmsdh_set_drvdata: Enter
- <4>[ 39.235250@0] bcmsdh_register_oob_intr: Enter
- <4>[ 39.235258@0] bcmsdh_register_oob_intr: IRQ=100 Type=414
- <4>[ 39.276460@1] dhd_conf_set_band: Set band 0
- <4>[ 39.286322@0] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=94:a1:a2:8c:5f:a8
- <4>[ 39.286327@0] dhd_conf_set_country: Set country ALL, revision 0
- <4>[ 39.354191@1] Country code: ALL (ALL/0)
- <4>[ 39.354533@1] dhd_conf_set_roam: Set roam_off 1
- <4>[ 39.359206@1] dhdcdc_set_ioctl: msg->status:ffffffe9
- <4>[ 39.368822@1] Driver: 1.88.45.4 (r420671)
- <4>[ 39.368822@1] Firmware: wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5
- <4>[ 39.376240@1] wl_android_wifi_on: Success
- <4>[ 39.398255@1] dhd_open: Exit ret=0
- <4>[ 39.492062@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode
- <4>[ 39.492062@0]
- <4>[ 39.497694@1] WARN::ep_dequeue:413: bogus device state
- <4>[ 39.497694@1]
- <6>[ 39.532934@1] read descriptors
- <6>[ 39.532969@1] read strings
- <6>[ 39.533052@1] mtp_bind_config
- <4>[ 39.536010@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode
- <4>[ 39.536010@0]
- <11>[ 40.337154@0] dig: data_integrity_guard isBootCompleted:1!
- <11>[ 40.338702@0] dig: dig set_data_ro_count count:0!
- <4>[ 41.210334@1] write pen_release: 2
- <4>[ 41.211016@2] CPU2: Booted secondary processor
- <7>[ 44.210226@1] -----hotplug:2
- <4>[ 44.270521@1] IRQ35 no longer affine to CPU1
- <4>[ 44.270548@1] IRQ93 no longer affine to CPU1
- <5>[ 44.270768@0] CPU1: shutdown
- <4>[ 46.510338@0] write pen_release: 1
- <4>[ 46.511046@1] CPU1: Booted secondary processor
- <7>[ 47.210256@0] -----hotplug:2
- <4>[ 47.260579@1] IRQ93 no longer affine to CPU1
- <5>[ 47.260799@0] CPU1: shutdown
- <4>[ 50.410351@0] write pen_release: 1
- <4>[ 50.411069@1] CPU1: Booted secondary processor
- <7>[ 51.510229@0] -----hotplug:2
- <4>[ 51.600532@2] IRQ94 no longer affine to CPU2
- <5>[ 51.600744@0] CPU2: shutdown
- <4>[ 52.610359@0] write pen_release: 2
- <4>[ 52.611024@2] CPU2: Booted secondary processor
- <6>[ 56.847306@2] BT_RADIO going: off
- <6>[ 56.847333@2] BCM_BT: going OFF
- <6>[ 56.870448@1] BT_RADIO going: on
- <6>[ 56.870477@1] BCM_BT: going ON
- <7>[ 56.930852@1] config uart_a_ttyS1:: Character length 8bits/char
- <6>[ 56.950261@1] Changing uart_a_ttyS1: baud from 0 to 115200
- <7>[ 56.970300@1] config uart_a_ttyS1:: Character length 8bits/char
- <7>[ 56.975757@1] config uart_a_ttyS1:: Character length 8bits/char
- <6>[ 56.990259@1] Changing uart_a_ttyS1: baud from 115200 to 2000000
- <4>[ 57.130931@1] IRQ93 no longer affine to CPU1
- <5>[ 57.131206@0] CPU1: shutdown
- <7>[ 57.600287@2] config uart_a_ttyS1:: Character length 8bits/char
- <6>[ 57.620245@2] Changing uart_a_ttyS1: baud from 2000000 to 115200
- <7>[ 57.842927@2] config uart_a_ttyS1:: Character length 8bits/char
- <6>[ 57.860265@2] Changing uart_a_ttyS1: baud from 115200 to 2000000
- <4>[ 58.989197@0] buf=0
- <4>[ 58.989218@0] IEC958_mode_raw=0
- <6>[ 58.989488@0] aml_spdif_mute
- <4>[ 58.992256@0] hdmitx: audio: configure on
- <4>[ 58.999577@0] buf=0
- <4>[ 58.999598@0] IEC958_mode_raw=0
- <6>[ 59.001332@2] aml_spdif_mute
- <4>[ 59.004307@2] hdmitx: audio: configure on
- <4>[ 59.410339@0] write pen_release: 1
- <4>[ 59.411023@1] CPU1: Booted secondary processor
- <4>[ 61.190922@1] IRQ93 no longer affine to CPU1
- <5>[ 61.191209@0] CPU1: shutdown
- <7>[ 61.397526@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2
- <6>[ 61.397719@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
- <4>[ 61.398951@0] ----aml_hw_iec958_init,runtime->rate=48000--
- <4>[ 61.404531@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
- <4>[ 61.411434@0] iec958 mode PCM16
- <4>[ 61.414157@0] IEC958 16bit
- <4>[ 61.416806@0] hdmitx: audio: aout notify rate 48000
- <4>[ 61.421826@0] hdmitx: audio: aout notify size 16
- <4>[ 61.426238@0] hdmitx: audio: no update
- <6>[ 61.429956@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
- <7>[ 61.436213@0] enter aml_set_bias_level level: 2
- <7>[ 61.436224@0] enter aml_set_bias_level level: 2
- <7>[ 61.436235@0] enter aml_set_bias_level level: 1
- <7>[ 61.436240@0] enter aml_set_bias_level level: 2
- <6>[ 61.436261@0] Amlogic <> pd3_env: name Right DAC , event(1)
- <6>[ 61.441632@0] Amlogic <> pd3_env: name Left DAC , event(1)
- <6>[ 61.446938@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(1)
- <6>[ 61.453220@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(1)
- <4>[ 61.459140@0] speaker_events--mute =1
- <7>[ 61.470336@0] enter aml_set_bias_level level: 3
- <7>[ 61.470350@0] enter aml_set_bias_level level: 3
- <7>[ 61.470372@0] enter:aml_m8_codec_mute_stream, mute=0, stream=0
- <6>[ 61.470879@0] [aml-i2s-dai]aiu i2s playback enable
- <6>[ 61.470879@0]
- <6>[ 61.471670@0] [aml-i2s-dai]audio_hw_958_enable 1
- <4>[ 62.210329@0] write pen_release: 1
- <4>[ 62.211023@1] CPU1: Booted secondary processor
- <11>[ 62.312083@0] init: untracked pid 1922 killed by signal 9
- <4>[ 63.250946@2] IRQ94 no longer affine to CPU2
- <5>[ 63.251224@0] CPU2: shutdown
- <4>[ 64.250571@0] write pen_release: 2
- <4>[ 64.251299@2] CPU2: Booted secondary processor
- <4>[ 65.332699@1] IRQ93 no longer affine to CPU1
- <5>[ 65.332987@0] CPU1: shutdown
- <4>[ 66.330559@0] write pen_release: 1
- <4>[ 66.331289@1] CPU1: Booted secondary processor
- <4>[ 67.371130@1] IRQ93 no longer affine to CPU1
- <5>[ 67.371492@0] CPU1: shutdown
- <4>[ 68.370543@0] write pen_release: 1
- <4>[ 68.371222@1] CPU1: Booted secondary processor
- <3>[ 68.678766@0] WARNING: You are using an experimental version of the media stack.
- <3>[ 68.678766@0] As the driver is backported to an older kernel, it doesn't offer
- <3>[ 68.678766@0] enough quality for its usage in production.
- <3>[ 68.678766@0] Use it with care.
- <3>[ 68.678766@0] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- <3>[ 68.678766@0] 9ddf9071ea17b83954358b2dac42b34e5857a9af Merge tag 'v4.3-rc1' into patchwork
- <3>[ 68.678766@0] 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f Linux 4.3-rc1
- <3>[ 68.678766@0] 6917b51dee54f21816706af2278517b7af218f9a Merge tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
- <3>[ 68.697491@2] WARNING: You are using an experimental version of the media stack.
- <3>[ 68.697491@2] As the driver is backported to an older kernel, it doesn't offer
- <3>[ 68.697491@2] enough quality for its usage in production.
- <3>[ 68.697491@2] Use it with care.
- <3>[ 68.697491@2] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- <3>[ 68.697491@2] 9ddf9071ea17b83954358b2dac42b34e5857a9af Merge tag 'v4.3-rc1' into patchwork
- <3>[ 68.697491@2] 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f Linux 4.3-rc1
- <3>[ 68.697491@2] 6917b51dee54f21816706af2278517b7af218f9a Merge tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
- <6>[ 68.713406@2] dw2102: su3000_identify_state
- <6>[ 68.713406@2]
- <6>[ 68.713409@2] dvb-usb: found a 'TechnoTrend TT-connect S2-4600' in warm state.
- <6>[ 68.713418@2] dw2102: su3000_power_ctrl: 1, initialized 0
- <6>[ 68.713418@2]
- <6>[ 68.745322@0] [aml-i2s-dai]aiu i2s playback disable
- <6>[ 68.745322@0]
- <6>[ 68.745324@0] [aml-i2s-dai]audio_hw_958_enable 0
- <6>[ 68.745450@1] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
- <4>[ 68.745452@1] ----aml_hw_iec958_init,runtime->rate=48000--
- <4>[ 68.745455@1] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
- <4>[ 68.745458@1] iec958 mode PCM16
- <4>[ 68.745461@1] IEC958 16bit
- <4>[ 68.745465@1] hdmitx: audio: aout notify rate 48000
- <4>[ 68.745467@1] hdmitx: audio: aout notify size 16
- <4>[ 68.745468@1] hdmitx: audio: no update
- <6>[ 68.745470@1] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
- <6>[ 68.745539@2] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
- <6>[ 68.747431@2] DVB: registering new adapter (TechnoTrend TT-connect S2-4600)
- <7>[ 68.748168@0] enter aml_set_bias_level level: 1
- <7>[ 68.748170@0] enter aml_set_bias_level level: 2
- <7>[ 68.748599@1] enter:aml_m8_codec_mute_stream, mute=0, stream=0
- <6>[ 68.749049@1] [aml-i2s-dai]aiu i2s playback enable
- <6>[ 68.749049@1]
- <6>[ 68.749051@1] [aml-i2s-dai]audio_hw_958_enable 1
- <6>[ 68.804202@0] [aml-i2s-dai]aiu i2s playback disable
- <6>[ 68.804202@0]
- <6>[ 68.804205@0] [aml-i2s-dai]audio_hw_958_enable 0
- <6>[ 68.804346@1] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
- <4>[ 68.804349@1] ----aml_hw_iec958_init,runtime->rate=48000--
- <4>[ 68.804352@1] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
- <4>[ 68.804354@1] iec958 mode PCM16
- <4>[ 68.804359@1] IEC958 16bit
- <4>[ 68.804363@1] hdmitx: audio: aout notify rate 48000
- <4>[ 68.804364@1] hdmitx: audio: aout notify size 16
- <4>[ 68.804365@1] hdmitx: audio: no update
- <6>[ 68.804367@1] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
- <7>[ 68.805345@0] enter aml_set_bias_level level: 1
- <7>[ 68.805347@0] enter aml_set_bias_level level: 2
- <7>[ 68.805434@1] enter:aml_m8_codec_mute_stream, mute=0, stream=0
- <6>[ 68.805825@1] [aml-i2s-dai]aiu i2s playback enable
- <6>[ 68.805825@1]
- <6>[ 68.805827@1] [aml-i2s-dai]audio_hw_958_enable 1
- <6>[ 68.817082@2] dvb-usb: MAC address: bc:ea:2b:46:11:e4
- <6>[ 69.145292@0] i2c i2c-0: Added multiplexed i2c bus 4
- <3>[ 69.147401@2] dvb-usb: no frontend was attached by 'TechnoTrend TT-connect S2-4600'
- <3>[ 69.148720@2] Couldn't load IR keymap rc-tt-1500
- <6>[ 69.148723@2] Registered IR keymap rc-empty
- <6>[ 69.148964@2] input: IR-receiver inside an USB DVB receiver as /devices/lm0/usb2/2-1/rc/rc0/input7
- <6>[ 69.149436@2] rc0: IR-receiver inside an USB DVB receiver as /devices/lm0/usb2/2-1/rc/rc0
- <6>[ 69.149440@2] dvb-usb: schedule remote query interval to 250 msecs.
- <6>[ 69.149445@2] dw2102: su3000_power_ctrl: 0, initialized 1
- <6>[ 69.149445@2]
- <6>[ 69.149448@2] dvb-usb: TechnoTrend TT-connect S2-4600 successfully initialized and connected.
- <6>[ 69.149521@2] usbcore: registered new interface driver dw2102
- <4>[ 69.440965@1] IRQ93 no longer affine to CPU1
- <5>[ 69.441266@0] CPU1: shutdown
- <6>[ 69.760316@2] usbcore: deregistering interface driver dw2102
- <6>[ 69.802509@2] dvb-usb: TechnoTrend TT-connect S2-4600 successfully deinitialized and disconnected.
- <4>[ 70.440852@0] write pen_release: 1
- <4>[ 70.441618@1] CPU1: Booted secondary processor
- <4>[ 71.480986@1] IRQ93 no longer affine to CPU1
- <5>[ 71.481294@0] CPU1: shutdown
- <4>[ 72.480551@0] write pen_release: 1
- <4>[ 72.481277@1] CPU1: Booted secondary processor
- <11>[ 72.663250@0] init: untracked pid 2652 exited with status 177
- <11>[ 72.698820@0] init: untracked pid 2682 exited with status 248
- <11>[ 72.716123@0] init: untracked pid 2744 exited with status 240
- <11>[ 72.772596@2] init: untracked pid 2756 exited with status 138
- <11>[ 72.991383@2] init: untracked pid 2655 exited with status 0
- <11>[ 72.991431@2] init: untracked pid 2747 exited with status 0
- <11>[ 72.997602@0] init: untracked pid 2759 exited with status 0
- <11>[ 73.005229@0] init: untracked pid 2684 exited with status 0
- <4>[ 73.520742@1] IRQ93 no longer affine to CPU1
- <5>[ 73.521005@0] CPU1: shutdown
- <4>[ 74.521578@0] write pen_release: 1
- <4>[ 74.522482@1] CPU1: Booted secondary processor
- <4>[ 75.550975@1] IRQ93 no longer affine to CPU1
- <5>[ 75.551256@0] CPU1: shutdown
- <4>[ 76.550567@0] write pen_release: 1
- <4>[ 76.551287@1] CPU1: Booted secondary processor
- <4>[ 77.621047@1] IRQ93 no longer affine to CPU1
- <5>[ 77.621342@0] CPU1: shutdown
- <4>[ 78.620564@0] write pen_release: 1
- <4>[ 78.621331@1] CPU1: Booted secondary processor
- <4>[ 79.690939@1] IRQ93 no longer affine to CPU1
- <5>[ 79.691217@0] CPU1: shutdown
- <4>[ 80.710360@0] write pen_release: 1
- <4>[ 80.711035@1] CPU1: Booted secondary processor
- <4>[ 81.731280@1] IRQ93 no longer affine to CPU1
- <5>[ 81.731527@0] CPU1: shutdown
- <4>[ 82.730767@0] write pen_release: 1
- <4>[ 82.731491@1] CPU1: Booted secondary processor
- <4>[ 83.771116@1] IRQ93 no longer affine to CPU1
- <5>[ 83.771399@0] CPU1: shutdown
- <4>[ 85.770508@0] write pen_release: 1
- <4>[ 85.771216@1] CPU1: Booted secondary processor
- <4>[ 86.820967@1] IRQ93 no longer affine to CPU1
- <5>[ 86.821248@0] CPU1: shutdown
- <4>[ 93.820524@0] write pen_release: 1
- <4>[ 93.821259@1] CPU1: Booted secondary processor
- <4>[ 94.871143@1] IRQ93 no longer affine to CPU1
- <5>[ 94.871445@0] CPU1: shutdown
- <4>[ 95.890718@0] write pen_release: 1
- <4>[ 95.891660@1] CPU1: Booted secondary processor
- <4>[ 97.930889@1] IRQ93 no longer affine to CPU1
- <5>[ 97.931159@0] CPU1: shutdown
- <4>[ 99.110328@0] write pen_release: 1
- <4>[ 99.110990@1] CPU1: Booted secondary processor
- <7>[ 100.410235@1] -----hotplug:2
- <4>[ 100.500605@1] IRQ93 no longer affine to CPU1
- <5>[ 100.500854@0] CPU1: shutdown
- <4>[ 101.810430@0] write pen_release: 1
- <4>[ 101.811109@1] CPU1: Booted secondary processor
- <3>[ 101.875159@0] WARNING: You are using an experimental version of the media stack.
- <3>[ 101.875159@0] As the driver is backported to an older kernel, it doesn't offer
- <3>[ 101.875159@0] enough quality for its usage in production.
- <3>[ 101.875159@0] Use it with care.
- <3>[ 101.875159@0] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- <3>[ 101.875159@0] 9ddf9071ea17b83954358b2dac42b34e5857a9af Merge tag 'v4.3-rc1' into patchwork
- <3>[ 101.875159@0] 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f Linux 4.3-rc1
- <3>[ 101.875159@0] 6917b51dee54f21816706af2278517b7af218f9a Merge tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
- <3>[ 101.889007@0] WARNING: You are using an experimental version of the media stack.
- <3>[ 101.889007@0] As the driver is backported to an older kernel, it doesn't offer
- <3>[ 101.889007@0] enough quality for its usage in production.
- <3>[ 101.889007@0] Use it with care.
- <3>[ 101.889007@0] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- <3>[ 101.889007@0] 9ddf9071ea17b83954358b2dac42b34e5857a9af Merge tag 'v4.3-rc1' into patchwork
- <3>[ 101.889007@0] 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f Linux 4.3-rc1
- <3>[ 101.889007@0] 6917b51dee54f21816706af2278517b7af218f9a Merge tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
- <6>[ 101.892316@0] dw2102: su3000_identify_state
- <6>[ 101.892316@0]
- <6>[ 101.892319@0] dvb-usb: found a 'TechnoTrend TT-connect S2-4600' in warm state.
- <6>[ 101.892327@0] dw2102: su3000_power_ctrl: 1, initialized 0
- <6>[ 101.892327@0]
- <6>[ 101.893680@0] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
- <6>[ 101.893770@0] DVB: registering new adapter (TechnoTrend TT-connect S2-4600)
- <6>[ 101.897748@0] dvb-usb: MAC address: bc:ea:2b:46:11:e4
- <11>[ 102.069553@1] init: untracked pid 3411 exited with status 26
- <6>[ 102.216091@0] i2c i2c-0: Added multiplexed i2c bus 4
- <3>[ 102.219708@1] dvb-usb: no frontend was attached by 'TechnoTrend TT-connect S2-4600'
- <3>[ 102.220086@0] Couldn't load IR keymap rc-tt-1500
- <6>[ 102.220089@0] Registered IR keymap rc-empty
- <6>[ 102.220528@0] input: IR-receiver inside an USB DVB receiver as /devices/lm0/usb2/2-1/rc/rc0/input8
- <6>[ 102.220759@2] rc0: IR-receiver inside an USB DVB receiver as /devices/lm0/usb2/2-1/rc/rc0
- <6>[ 102.220764@2] dvb-usb: schedule remote query interval to 250 msecs.
- <6>[ 102.220772@2] dw2102: su3000_power_ctrl: 0, initialized 1
- <6>[ 102.220772@2]
- <6>[ 102.220776@2] dvb-usb: TechnoTrend TT-connect S2-4600 successfully initialized and connected.
- <6>[ 102.221903@2] usbcore: registered new interface driver dw2102
- <11>[ 102.297979@1] init: untracked pid 3414 exited with status 0
- <11>[ 102.336554@1] init: untracked pid 3426 exited with status 156
- <11>[ 102.550573@1] init: untracked pid 3429 exited with status 0
- <6>[ 102.730284@0] usbcore: deregistering interface driver dw2102
- <6>[ 102.792022@2] dvb-usb: TechnoTrend TT-connect S2-4600 successfully deinitialized and disconnected.
- <11>[ 102.901713@1] init: untracked pid 3468 exited with status 67
- <11>[ 103.117995@1] init: untracked pid 3471 exited with status 0
- <11>[ 103.207445@1] init: untracked pid 3479 exited with status 46
- <11>[ 103.427929@1] init: untracked pid 3481 exited with status 0
- <7>[ 104.210261@0] -----hotplug:2
- <4>[ 104.271744@1] IRQ93 no longer affine to CPU1
- <5>[ 104.271978@0] CPU1: shutdown
- <6>[ 124.163369@0] [aml-i2s-dai]aiu i2s playback disable
- <6>[ 124.163369@0]
- <6>[ 124.164272@0] [aml-i2s-dai]audio_hw_958_enable 0
- <7>[ 124.169104@0] enter:aml_m8_codec_mute_stream, mute=1, stream=0
- <4>[ 124.169127@0] IEC958 16bit
- <4>[ 124.171760@0] hdmitx: audio: aout notify rate 48000
- <4>[ 124.176583@0] hdmitx: audio: aout notify size 16
- <4>[ 124.181316@0] hdmitx: audio: no update
- <4>[ 124.184738@0] aml_i2s_close device type 8
- <7>[ 129.190394@2] enter aml_set_bias_level level: 2
- <7>[ 129.190427@2] enter aml_set_bias_level level: 2
- <7>[ 129.190437@0] enter aml_set_bias_level level: 1
- <7>[ 129.190451@0] enter aml_set_bias_level level: 2
- <4>[ 129.190484@0] speaker_events--mute =0
- <6>[ 129.190586@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(4)
- <6>[ 129.194841@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(4)
- <6>[ 129.200906@0] Amlogic <> pd3_env: name Right DAC , event(4)
- <6>[ 129.206386@0] Amlogic <> pd3_env: name Left DAC , event(4)
- <6>[ 129.211724@0] Amlogic <> pd3_env: name Right DAC , event(8)
- <6>[ 129.217345@0] Amlogic <> pd3_env: name Left DAC , event(8)
- <7>[ 129.222852@2] enter aml_set_bias_level level: 1
- <7>[ 129.222876@2] enter aml_set_bias_level level: 1
- <7>[ 206.335766@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2
- <6>[ 206.336240@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
- <4>[ 206.337570@0] ----aml_hw_iec958_init,runtime->rate=48000--
- <4>[ 206.344106@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
- <4>[ 206.349852@0] iec958 mode PCM16
- <4>[ 206.353369@0] IEC958 16bit
- <4>[ 206.355456@0] hdmitx: audio: aout notify rate 48000
- <4>[ 206.360702@0] hdmitx: audio: aout notify size 16
- <4>[ 206.364906@0] hdmitx: audio: no update
- <6>[ 206.368610@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
- <7>[ 206.375052@0] enter aml_set_bias_level level: 2
- <7>[ 206.375074@2] enter aml_set_bias_level level: 2
- <7>[ 206.375094@2] enter aml_set_bias_level level: 1
- <7>[ 206.375100@2] enter aml_set_bias_level level: 2
- <6>[ 206.375288@0] Amlogic <> pd3_env: name Right DAC , event(1)
- <6>[ 206.380333@0] Amlogic <> pd3_env: name Left DAC , event(1)
- <6>[ 206.385567@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(1)
- <6>[ 206.392013@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(1)
- <4>[ 206.397899@0] speaker_events--mute =1
- <7>[ 206.400470@2] enter aml_set_bias_level level: 3
- <7>[ 206.400485@2] enter aml_set_bias_level level: 3
- <7>[ 206.400524@2] enter:aml_m8_codec_mute_stream, mute=0, stream=0
- <6>[ 206.401632@2] [aml-i2s-dai]aiu i2s playback enable
- <6>[ 206.401632@2]
- <6>[ 206.401638@2] [aml-i2s-dai]audio_hw_958_enable 1
- <6>[ 210.303141@0] [aml-i2s-dai]aiu i2s playback disable
- <6>[ 210.303141@0]
- <6>[ 210.304044@0] [aml-i2s-dai]audio_hw_958_enable 0
- <7>[ 210.308914@0] enter:aml_m8_codec_mute_stream, mute=1, stream=0
- <4>[ 210.308942@0] IEC958 16bit
- <4>[ 210.311458@0] hdmitx: audio: aout notify rate 48000
- <4>[ 210.316434@0] hdmitx: audio: aout notify size 16
- <4>[ 210.320920@0] hdmitx: audio: no update
- <4>[ 210.324638@0] aml_i2s_close device type 8
- <7>[ 210.368625@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2
- <6>[ 210.369077@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
- <4>[ 210.370478@0] ----aml_hw_iec958_init,runtime->rate=48000--
- <4>[ 210.376072@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
- <4>[ 210.382814@0] iec958 mode PCM16
- <4>[ 210.385716@0] IEC958 16bit
- <4>[ 210.385728@0] hdmitx: audio: aout notify rate 48000
- <4>[ 210.385733@0] hdmitx: audio: aout notify size 16
- <4>[ 210.385737@0] hdmitx: audio: no update
- <6>[ 210.385745@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
- <7>[ 210.386290@0] enter aml_set_bias_level level: 1
- <7>[ 210.386296@0] enter aml_set_bias_level level: 2
- <7>[ 210.386453@0] enter:aml_m8_codec_mute_stream, mute=0, stream=0
- <6>[ 210.387954@0] [aml-i2s-dai]aiu i2s playback enable
- <6>[ 210.387954@0]
- <6>[ 210.387960@0] [aml-i2s-dai]audio_hw_958_enable 1
- <6>[ 215.377541@0] [aml-i2s-dai]aiu i2s playback disable
- <6>[ 215.377541@0]
- <6>[ 215.378442@0] [aml-i2s-dai]audio_hw_958_enable 0
- <7>[ 215.383371@0] enter:aml_m8_codec_mute_stream, mute=1, stream=0
- <4>[ 215.383401@0] IEC958 16bit
- <4>[ 215.385850@0] hdmitx: audio: aout notify rate 48000
- <4>[ 215.390881@0] hdmitx: audio: aout notify size 16
- <4>[ 215.395264@0] hdmitx: audio: no update
- <4>[ 215.399038@0] aml_i2s_close device type 8
- <7>[ 220.410355@2] enter aml_set_bias_level level: 2
- <7>[ 220.410367@2] enter aml_set_bias_level level: 2
- <7>[ 220.410373@0] enter aml_set_bias_level level: 1
- <7>[ 220.410377@0] enter aml_set_bias_level level: 2
- <4>[ 220.410398@0] speaker_events--mute =0
- <6>[ 220.410420@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(4)
- <6>[ 220.410426@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(4)
- <6>[ 220.410445@0] Amlogic <> pd3_env: name Right DAC , event(4)
- <6>[ 220.410449@0] Amlogic <> pd3_env: name Left DAC , event(4)
- <6>[ 220.410453@0] Amlogic <> pd3_env: name Right DAC , event(8)
- <6>[ 220.410458@0] Amlogic <> pd3_env: name Left DAC , event(8)
- <7>[ 220.410504@0] enter aml_set_bias_level level: 1
- <7>[ 220.410511@0] enter aml_set_bias_level level: 1
- <7>[ 220.683739@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2
- <6>[ 220.684087@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
- <4>[ 220.685391@0] ----aml_hw_iec958_init,runtime->rate=48000--
- <4>[ 220.691366@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
- <4>[ 220.697903@0] iec958 mode PCM16
- <4>[ 220.700697@0] IEC958 16bit
- <4>[ 220.703461@0] hdmitx: audio: aout notify rate 48000
- <4>[ 220.708219@0] hdmitx: audio: aout notify size 16
- <4>[ 220.708223@0] hdmitx: audio: no update
- <6>[ 220.708230@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
- <7>[ 220.708437@0] enter aml_set_bias_level level: 2
- <7>[ 220.708447@0] enter aml_set_bias_level level: 2
- <7>[ 220.708459@0] enter aml_set_bias_level level: 1
- <7>[ 220.708463@0] enter aml_set_bias_level level: 2
- <6>[ 220.708494@0] Amlogic <> pd3_env: name Right DAC , event(1)
- <6>[ 220.708507@0] Amlogic <> pd3_env: name Left DAC , event(1)
- <6>[ 220.708527@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(1)
- <6>[ 220.708533@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(1)
- <4>[ 220.708573@0] speaker_events--mute =1
- <7>[ 220.710437@2] enter aml_set_bias_level level: 3
- <7>[ 220.710451@2] enter aml_set_bias_level level: 3
- <7>[ 220.710480@0] enter:aml_m8_codec_mute_stream, mute=0, stream=0
- <6>[ 220.711629@0] [aml-i2s-dai]aiu i2s playback enable
- <6>[ 220.711629@0]
- <6>[ 220.711633@0] [aml-i2s-dai]audio_hw_958_enable 1
- <6>[ 223.738467@0] [aml-i2s-dai]aiu i2s playback disable
- <6>[ 223.738467@0]
- <6>[ 223.739371@0] [aml-i2s-dai]audio_hw_958_enable 0
- <7>[ 223.744356@0] enter:aml_m8_codec_mute_stream, mute=1, stream=0
- <4>[ 223.744387@0] IEC958 16bit
- <4>[ 223.746745@0] hdmitx: audio: aout notify rate 48000
- <4>[ 223.751923@0] hdmitx: audio: aout notify size 16
- <4>[ 223.756166@0] hdmitx: audio: no update
- <4>[ 223.759963@0] aml_i2s_close device type 8
- <7>[ 228.770420@2] enter aml_set_bias_level level: 2
- <7>[ 228.770453@2] enter aml_set_bias_level level: 2
- <7>[ 228.770463@0] enter aml_set_bias_level level: 1
- <7>[ 228.770476@0] enter aml_set_bias_level level: 2
- <4>[ 228.770509@0] speaker_events--mute =0
- <6>[ 228.770609@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(4)
- <6>[ 228.774964@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(4)
- <6>[ 228.780908@0] Amlogic <> pd3_env: name Right DAC , event(4)
- <6>[ 228.786429@0] Amlogic <> pd3_env: name Left DAC , event(4)
- <6>[ 228.791901@0] Amlogic <> pd3_env: name Right DAC , event(8)
- <6>[ 228.797334@0] Amlogic <> pd3_env: name Left DAC , event(8)
- <7>[ 228.802831@2] enter aml_set_bias_level level: 1
- <7>[ 228.802882@0] enter aml_set_bias_level level: 1
- <7>[ 316.567881@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2
- <6>[ 316.568302@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
- <4>[ 316.568326@0] ----aml_hw_iec958_init,runtime->rate=48000--
- <4>[ 316.568333@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
- <4>[ 316.568340@0] iec958 mode PCM16
- <4>[ 316.568349@0] IEC958 16bit
- <4>[ 316.568358@0] hdmitx: audio: aout notify rate 48000
- <4>[ 316.568362@0] hdmitx: audio: aout notify size 16
- <4>[ 316.568366@0] hdmitx: audio: no update
- <6>[ 316.568373@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
- <7>[ 316.568785@2] enter aml_set_bias_level level: 2
- <7>[ 316.568803@2] enter aml_set_bias_level level: 2
- <7>[ 316.568811@0] enter aml_set_bias_level level: 1
- <7>[ 316.568837@0] enter aml_set_bias_level level: 2
- <6>[ 316.568871@0] Amlogic <> pd3_env: name Right DAC , event(1)
- <6>[ 316.568880@0] Amlogic <> pd3_env: name Left DAC , event(1)
- <6>[ 316.568894@0] Amlogic <> pd3_env: name Right HP OUT PGA , event(1)
- <6>[ 316.568961@0] Amlogic <> pd3_env: name Left HP OUT PGA , event(1)
- <4>[ 316.568969@0] speaker_events--mute =1
- <7>[ 316.570546@0] enter aml_set_bias_level level: 3
- <7>[ 316.570612@0] enter aml_set_bias_level level: 3
- <7>[ 316.570664@0] enter:aml_m8_codec_mute_stream, mute=0, stream=0
- <6>[ 316.572056@0] [aml-i2s-dai]aiu i2s playback enable
- <6>[ 316.572056@0]
- <6>[ 316.572062@0] [aml-i2s-dai]audio_hw_958_enable 1
- <6>[ 320.878948@0] [aml-i2s-dai]aiu i2s playback disable
- <6>[ 320.878948@0]
- <6>[ 320.879847@0] [aml-i2s-dai]audio_hw_958_enable 0
- <7>[ 320.884806@0] enter:aml_m8_codec_mute_stream, mute=1, stream=0
- <4>[ 320.884832@0] IEC958 16bit
- <4>[ 320.887248@0] hdmitx: audio: aout notify rate 48000
- <4>[ 320.892383@0] hdmitx: audio: aout notify size 16
- <4>[ 320.896829@0] hdmitx: audio: no update
- <4>[ 320.900453@0] aml_i2s_close device type 8
- <7>[ 323.890979@0] enter aml_asoc_hw_params stream: playback rate: 48000 format: 2
- <6>[ 323.891430@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
- <4>[ 323.891437@0] ----aml_hw_iec958_init,runtime->rate=48000--
- <4>[ 323.891446@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
- <4>[ 323.891452@0] iec958 mode PCM16
- <4>[ 323.891462@0] IEC958 16bit
- <4>[ 323.891471@0] hdmitx: audio: aout notify rate 48000
- <4>[ 323.891476@0] hdmitx: audio: aout notify size 16
- <4>[ 323.891480@0] hdmitx: audio: no update
- <6>[ 323.891487@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
- <7>[ 323.891630@2] enter aml_set_bias_level level: 1
- <7>[ 323.891637@2] enter aml_set_bias_level level: 2
- <7>[ 323.891953@0] enter:aml_m8_codec_mute_stream, mute=0, stream=0
- <6>[ 323.893174@0] [aml-i2s-dai]aiu i2s playback enable
- <6>[ 323.893174@0]
- <6>[ 323.893180@0] [aml-i2s-dai]audio_hw_958_enable 1
- <3>[ 324.339176@0] WARNING: You are using an experimental version of the media stack.
- <3>[ 324.339176@0] As the driver is backported to an older kernel, it doesn't offer
- <3>[ 324.339176@0] enough quality for its usage in production.
- <3>[ 324.339176@0] Use it with care.
- <3>[ 324.339176@0] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- <3>[ 324.339176@0] 9ddf9071ea17b83954358b2dac42b34e5857a9af Merge tag 'v4.3-rc1' into patchwork
- <3>[ 324.339176@0] 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f Linux 4.3-rc1
- <3>[ 324.339176@0] 6917b51dee54f21816706af2278517b7af218f9a Merge tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
- <3>[ 324.359704@0] WARNING: You are using an experimental version of the media stack.
- <3>[ 324.359704@0] As the driver is backported to an older kernel, it doesn't offer
- <3>[ 324.359704@0] enough quality for its usage in production.
- <3>[ 324.359704@0] Use it with care.
- <3>[ 324.359704@0] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- <3>[ 324.359704@0] 9ddf9071ea17b83954358b2dac42b34e5857a9af Merge tag 'v4.3-rc1' into patchwork
- <3>[ 324.359704@0] 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f Linux 4.3-rc1
- <3>[ 324.359704@0] 6917b51dee54f21816706af2278517b7af218f9a Merge tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
- <6>[ 324.362850@0] dw2102: su3000_identify_state
- <6>[ 324.362850@0]
- <6>[ 324.362852@0] dvb-usb: found a 'TechnoTrend TT-connect S2-4600' in warm state.
- <6>[ 324.362860@0] dw2102: su3000_power_ctrl: 1, initialized 0
- <6>[ 324.362860@0]
- <6>[ 324.363887@0] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
- <6>[ 324.363978@0] DVB: registering new adapter (TechnoTrend TT-connect S2-4600)
- <6>[ 324.373600@0] dvb-usb: MAC address: bc:ea:2b:46:11:e4
- <6>[ 324.445199@0] [aml-i2s-dai]aiu i2s playback disable
- <6>[ 324.445199@0]
- <6>[ 324.445202@0] [aml-i2s-dai]audio_hw_958_enable 0
- <6>[ 324.464729@2] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
- <4>[ 324.464733@2] ----aml_hw_iec958_init,runtime->rate=48000--
- <4>[ 324.464737@2] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
- <4>[ 324.464741@2] iec958 mode PCM16
- <4>[ 324.464746@2] IEC958 16bit
- <4>[ 324.464751@2] hdmitx: audio: aout notify rate 48000
- <4>[ 324.464752@2] hdmitx: audio: aout notify size 16
- <4>[ 324.464753@2] hdmitx: audio: no update
- <6>[ 324.464755@2] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
- <7>[ 324.464819@0] enter aml_set_bias_level level: 1
- <7>[ 324.464821@0] enter aml_set_bias_level level: 2
- <7>[ 324.465268@2] enter:aml_m8_codec_mute_stream, mute=0, stream=0
- <6>[ 324.504521@2] [aml-i2s-dai]aiu i2s playback enable
- <6>[ 324.504521@2]
- <6>[ 324.504524@2] [aml-i2s-dai]audio_hw_958_enable 1
- <4>[ 324.570341@0] write pen_release: 1
- <4>[ 324.570965@1] CPU1: Booted secondary processor
- <11>[ 324.586653@0] init: untracked pid 3568 exited with status 163
- <6>[ 324.686636@0] i2c i2c-0: Added multiplexed i2c bus 4
- <3>[ 324.689352@0] dvb-usb: no frontend was attached by 'TechnoTrend TT-connect S2-4600'
- <3>[ 324.689798@0] Couldn't load IR keymap rc-tt-1500
- <6>[ 324.689800@0] Registered IR keymap rc-empty
- <6>[ 324.690593@0] input: IR-receiver inside an USB DVB receiver as /devices/lm0/usb2/2-1/rc/rc0/input9
- <6>[ 324.693367@1] rc0: IR-receiver inside an USB DVB receiver as /devices/lm0/usb2/2-1/rc/rc0
- <6>[ 324.693370@1] dvb-usb: schedule remote query interval to 250 msecs.
- <6>[ 324.693375@1] dw2102: su3000_power_ctrl: 0, initialized 1
- <6>[ 324.693375@1]
- <6>[ 324.693377@1] dvb-usb: TechnoTrend TT-connect S2-4600 successfully initialized and connected.
- <6>[ 324.693820@1] usbcore: registered new interface driver dw2102
- <11>[ 324.797530@0] init: untracked pid 3571 exited with status 0
- <11>[ 324.803433@0] init: untracked pid 3593 exited with status 72
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement