Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000@0] Initializing cgroup subsys cpuset
- [ 0.000000@0] Initializing cgroup subsys cpu
- [ 0.000000@0] Initializing cgroup subsys cpuacct
- [ 0.000000@0] Linux version 3.14.29 (user@user-VirtualBox) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11) ) #1 SMP Thu Jun 14 11:42:24 MSK 2018
- [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
- [ 0.000000@0] bootconsole [earlycon0] enabled
- [ 0.000000@0] fdt Reserved memory table:
- [ 0.000000@0] linux,di_cma: 0x000000007dc00000 - 0x0000000080000000 (36 MiB)
- [ 0.000000@0] cma: Reserved 36 MiB at 7dc00000, total cma pages:9216
- [ 0.000000@0] linux,chunk-reserve: 0x0000000079c00000 - 0x000000007dc00000 (64 MiB)
- [ 0.000000@0] linux,ion-dev: 0x0000000076c00000 - 0x0000000079c00000 (48 MiB)
- [ 0.000000@0] linux,cma-reserve: 0x000000006f800000 - 0x0000000073800000 (64 MiB)
- [ 0.000000@0] cma: Reserved 64 MiB at 6f800000, total cma pages:25600
- [ 0.000000@0] linux,vdin1_cma: 0x0000000075c00000 - 0x0000000076c00000 (16 MiB)
- [ 0.000000@0] cma: Reserved 16 MiB at 75c00000, total cma pages:29696
- [ 0.000000@0] linux,ppmgr: 0x0000000075c00000 - 0x0000000075c00000 (0 MiB)
- [ 0.000000@0] linux,codec_mm_cma: 0x0000000063800000 - 0x000000006f800000 (192 MiB)
- [ 0.000000@0] cma: Reserved 192 MiB at 63800000, total cma pages:78848
- [ 0.000000@0] linux,picdec: 0x0000000075c00000 - 0x0000000075c00000 (0 MiB)
- [ 0.000000@0] Reserved memory: unable to setup CMA region
- [ 0.000000@0] linux,codec_mm_reserved: 0x0000000075c00000 - 0x0000000075c00000 (0 MiB)
- [ 0.000000@0] fdt Reserved memory total: 456 MiB
- [ 0.000000@0] cma: Reserved 8 MiB at 75400000, total cma pages:80896
- [ 0.000000@0] On node 0 totalpages: 514816
- [ 0.000000@0] Normal zone: 11259 pages used for memmap
- [ 0.000000@0] Normal zone: 0 pages reserved
- [ 0.000000@0] Normal zone: 514816 pages, LIFO batch:31
- [ 0.000000@0] psci: Using PSCI v0.1 Function IDs from DT
- [ 0.000000@0] PERCPU: Embedded 11 pages/cpu @ffffffc0753a2000 s13760 r8192 d23104 u45056
- [ 0.000000@0] pcpu-alloc: s13760 r8192 d23104 u45056 alloc=11*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503557
- [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,576cvbs maxcpus=4 vout=576cvbs,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.ddrclk=666MHz androidboot.hardware=amlogic mac=06:41:71:11:1a:e7 androidboot.mac=06:41:71:11:1a:e7 androidboot.slot_suffix=_a bootfromusb console=tty0 systemd.show_status=auto
- [ 0.000000@0] logo: osd1
- [ 0.000000@0] logo: loaded
- [ 0.000000@0] logo: 0x3d800000
- [ 0.000000@0] logo: 576cvbs
- [ 0.000000@0] vout_serve: 576cvbs
- [ 0.000000@0] vout_serve: en: 1
- [ 0.000000@0] vout_serve: set_vout_init_vmode: 576cvbs
- [ 0.000000@0] vout_serve: 576cvbs
- [ 0.000000@0] vout_serve: enable: 1
- [ 0.000000@0] logo: get hdmimode: 1080p60hz
- [ 0.000000@0] logo: get cvbsmode: 576cvbs
- [ 0.000000@0] tv_vout: cvbs performance line = 0
- [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000@0] Memory: 1552176K/2059264K available (6333K kernel code, 726K rwdata, 2444K rodata, 749K init, 2919K bss, 507088K reserved)
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
- [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042c10000 ( 44 MB)
- [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
- [ 0.000000@0] .init : 0xffffffc001914000 - 0xffffffc0019cf5c0 ( 750 kB)
- [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001913724 ( 8782 kB)
- [ 0.000000@0] .data : 0xffffffc0019d0000 - 0xffffffc001a85848 ( 727 kB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] arch_multi_cluster:0
- [ 0.000000@0] Hierarchical RCU implementation.
- [ 0.000000@0] RCU debugfs-based tracing is enabled.
- [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
- [ 0.008244@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
- [ 0.016765@0] Console: colour dummy device 80x25
- [ 0.021087@0] console [tty0] enabled
- [ 0.024672@0] bootconsole [earlycon0] disabled
- [ 0.033055@0] allocated 8388608 bytes of page_cgroup
- [ 0.033065@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.033087@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.033105@0] pid_max: default: 32768 minimum: 301
- [ 0.033235@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.033247@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.038036@0] Initializing cgroup subsys memory
- [ 0.038076@0] Initializing cgroup subsys devices
- [ 0.038086@0] Initializing cgroup subsys freezer
- [ 0.038094@0] Initializing cgroup subsys blkio
- [ 0.038102@0] Initializing cgroup subsys net_prio
- [ 0.038601@0] /cpus/cpu@0: Missing clock-frequency property
- [ 0.038619@0] /cpus/cpu@1: Missing clock-frequency property
- [ 0.038628@0] /cpus/cpu@2: Missing clock-frequency property
- [ 0.038638@0] /cpus/cpu@3: Missing clock-frequency property
- [ 0.040404@0] Meson chip version = RevB (21:B - A2:0)
- [ 0.040834@1] CPU1: Booted secondary processor
- [ 0.041193@2] CPU2: Booted secondary processor
- [ 0.041508@3] CPU3: Booted secondary processor
- [ 0.041570@0] Brought up 4 CPUs
- [ 0.041601@0] SMP: Total of 4 processors activated.
- [ 0.042099@0] devtmpfs: initialized
- [ 0.048759@0] sched: registering cpufreq notifiers for scale-invariant loads
- [ 0.061852@0] cma: cma_init_reserved_areas, use_cma_first:1
- [ 0.061950@0] pinctrl core: initialized pinctrl subsystem
- [ 0.062597@0] regulator-dummy: no parameters
- [ 0.063342@0] NET: Registered protocol family 16
- [ 0.065008@0] ramoops: using module parameters
- [ 0.065556@0] pstore: Registered ramoops as persistent store backend
- [ 0.065576@0] ramoops: attached 0x100000@0x7300000, ecc: 0/0
- [ 0.066321@0] aml_vdac_init: module init
- [ 0.066466@0] register canvas platform driver
- [ 0.066541@0] register rdma platform driver
- [ 0.068006@0] vdso: 2 pages (1 code, 1 data) at base ffffffc0019d6000
- [ 0.068421@0] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.070469@0] software IO TLB [mem 0x60000000-0x60400000] (4MB) mapped at [ffffffc060000000-ffffffc0603fffff]
- [ 0.071008@0] aml_i2c version: 20140813
- [ 0.071192@0] i2c-core: driver [pmu4] using legacy resume method
- [ 0.071261@0] codec_mm:codec_mm_module_init
- [ 0.071340@0] media_configs_system_init
- [ 0.071585@0] meson_mpll_clk: register mpll_clk_out0 success done
- [ 0.071599@0] meson_mpll_clk: register mpll_clk_out1 success done
- [ 0.071610@0] meson_mpll_clk: register mpll_clk_out2 success done
- [ 0.071811@0] clk_sys: register PLL sys_pll success done
- [ 0.071830@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
- [ 0.071839@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
- [ 0.071848@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
- [ 0.071856@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
- [ 0.071865@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
- [ 0.071874@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
- [ 0.071883@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
- [ 0.071891@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
- [ 0.071899@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
- [ 0.071932@0] gxl_clk: clock initialization complete
- [ 0.072117@0] clkmsr: Gxl msr_clk_reg0=ffffff800003a75c,msr_clk_reg2=ffffff800003c764
- [ 0.074502@0] aml_iomap: amlogic iomap probe done
- [ 0.075103@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
- [ 0.075921@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
- [ 0.076451@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb8)
- [ 0.076479@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb8)
- [ 0.076659@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xb8)
- [ 0.076680@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xb8)
- [ 0.078961@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
- [ 0.078975@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
- [ 0.078984@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
- [ 0.078993@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
- [ 0.079002@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
- [ 0.079011@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1200000000
- [ 0.079020@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1200000000
- [ 0.081528@0] codec_mm has 2 memory regions
- [ 0.081593@0] codec_mm codec_mm.20: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.081613@0] codec_mm codec_mm.20: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.081707@0] codec_mm has 2 memory regions
- [ 0.081726@0] codec_mm codec_mm.20: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.081741@0] codec_mm codec_mm.20: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.083707@0] vpu: driver version: v04
- [ 0.083752@0] vpu: load vpu_clk: 666667000Hz(7)
- [ 0.083836@0] vpu: vpu_probe OK
- [ 0.085270@0] tv_vout: tvout_probe
- [ 0.085292@0] tv_vout: chrdev devno 265289728 for disp
- [ 0.085301@0] vout_notify: vout_register_server
- [ 0.085309@0] tv_vout: register tv module server ok
- [ 0.085546@0] tv_vout: create cdev tv
- [ 0.085561@0] tv_vout: tvout_probe OK
- [ 0.086093@0] canvas_probe reg=00000000c8838000,size=400
- [ 0.086135@0] canvas maped reg_base =ffffff800008e000
- [ 0.089954@0] rdma_probe
- [ 0.336433@0] bio: create slab <bio-0> at 0
- [ 0.337299@0] SCSI subsystem initialized
- [ 0.337795@0] usbcore: registered new interface driver usbfs
- [ 0.337893@0] usbcore: registered new interface driver hub
- [ 0.337997@0] usbcore: registered new device driver usb
- [ 0.338751@0] i2c-gpio i2c_gpio.40: using pins 172 (SDA) and 173 (SCL)
- [ 0.338940@0] pps_core: LinuxPPS API ver. 1 registered
- [ 0.338952@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.339015@0] PTP clock support registered
- [ 0.339473@0] hdmitx: system: Ver: 2014May6
- [ 0.339682@0] hdmitx: amhdmitx_probe
- [ 0.340068@0] hdmitx: hdmi_init_chip_type: 0
- [ 0.340087@0] hdmitx: system: not find match init-data
- [ 0.340099@0] hdmitx hpd irq = 89
- [ 0.340792@0] hdmitx20: Mapped PHY: 0xc1100000
- [ 0.340816@0] hdmitx20: Mapped PHY: 0xc8834400
- [ 0.340838@0] hdmitx20: Mapped PHY: 0xd0100000
- [ 0.340860@0] hdmitx20: Mapped PHY: 0xc8100000
- [ 0.340870@0] hdmitx20: Mapped PHY: 0xc883c000
- [ 0.340879@0] hdmitx20: Mapped PHY: 0xc1104400
- [ 0.340888@0] hdmitx20: Mapped PHY: 0xc883a000
- [ 0.340897@0] hdmitx20: Mapped PHY: 0xda83a000
- [ 0.340906@0] hdmitx20: Mapped PHY: 0xd0044000
- [ 0.341163@0] avmute set to 1
- [ 0.341175@0] hdmitx: attr default
- [ 0.341740@0] tv_vout: tv_set_current_vmode[930]fps_target_mode=8
- [ 0.341760@0] tv_vout: mode is 8,sync_duration_den=1,sync_duration_num=50
- [ 0.341780@0] tv_vout: already display in uboot
- [ 0.341788@0] vout_serve: vinfo mode is: 576cvbs
- [ 0.341796@0] vout_serve: init mode 576cvbs
- [ 0.342069@1] vout_serve: create_vout_fops OK
- [ 0.342082@1] vout_serve: create vout attribute OK
- [ 0.342091@1] vout_serve: meson_vout_probe OK
- [ 0.342294@1] logo: logo_init
- [ 0.342555@1] osd_rdma: osd_rdma_init: rdma_table p=0x75441000,op=0x75441000 , v=0xffffff80000c9000
- [ 0.342585@1] rdma_register, rdma_table_addr ffffff80000cb000 rdma_table_addr_phy 75442000 reg_buf ffffffc000135000
- [ 0.342598@1] rdma_register success, handle 1 table_size 4096
- [ 0.342608@1] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
- [ 0.342634@1] rdma_register, rdma_table_addr ffffff80000cd000 rdma_table_addr_phy 75443000 reg_buf ffffffc0001d4000
- [ 0.342647@1] rdma_register success, handle 2 table_size 4096
- [ 0.342655@1] osd_rdma: osd_rdma_init:osd rdma handle = 2.
- [ 0.343135@1] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.345464@1] Switched to clocksource arch_sys_counter
- [ 0.345713@1] FS-Cache: Loaded
- [ 0.348449@0] hdmitx: system: irq 2
- [ 0.356757@1] NET: Registered protocol family 2
- [ 0.357198@1] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.357324@1] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.357561@1] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.357666@1] TCP: reno registered
- [ 0.357682@1] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.357727@1] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.357943@1] NET: Registered protocol family 1
- [ 0.358119@1] pwm: output_co = 16 ; clock_co = 8
- [ 0.358150@1] pwm: npwm= 16
- [ 0.358509@1] pwm: probe ok
- [ 0.358956@1] wifi: power_on_pin_OD = 0;
- [ 0.358977@1] aml_wifi wifi.35: [wifi_dev_probe] no power_on_pin2
- [ 0.359020@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm phandle val=34;pwm-channel1=4;pwm-channel2=12
- [ 0.359035@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
- [ 0.359048@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
- [ 0.359060@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
- [ 0.359073@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
- [ 0.359086@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
- [ 0.359098@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
- [ 0.359110@1] aml_wifi wifi.35: [pwm_double_channel_conf_dt] wifi pwm dt ok
- [ 0.359135@1] aml_wifi wifi.35: [pwm_double_channel_conf] wifi pwm conf ok
- [ 0.359195@1] aml_wifi wifi.35: [wifi_dev_probe] dhd_static_buf setup
- [ 0.359269@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
- [ 0.359283@1] aml_wifi wifi.35: [wifi_dev_probe] interrupt_pin=241
- [ 0.359294@1] aml_wifi wifi.35: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
- [ 0.359306@1] aml_wifi wifi.35: [wifi_dev_probe] power_on_pin=240
- [ 0.359316@1] aml_wifi wifi.35: [wifi_dev_probe] clock_32k_pin=0
- [ 0.359637@1] aml_wifi wifi.35: [wifi_setup_dt] wifi_setup_dt
- [ 0.359678@1] aml_wifi wifi.35: [wifi_setup_dt] interrupt_pin(241)
- [ 0.359697@1] aml_wifi wifi.35: [wifi_setup_dt] power_on_pin(240)
- [ 0.359897@1] Unpacking initramfs...
- [ 0.375882@1] Freeing initrd memory: 4968K (ffffffc0739c3000 - ffffffc073e9d000)
- [ 0.379635@1] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.388901@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.389420@1] msgmni has been set to 3673
- [ 0.390480@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.390580@1] io scheduler noop registered (default)
- [ 0.390593@1] io scheduler deadline registered
- [ 0.390623@1] io scheduler cfq registered
- [ 0.391545@1] meson-rng c8834000.rng: hwrng registered
- [ 0.395187@1] loop: module loaded
- [ 0.397107@1] tun: Universal TUN/TAP device driver, 1.6
- [ 0.397130@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.401323@1] libphy: stmmac: probed
- [ 0.401348@1] eth0: PHY ID 01814400 at 8 IRQ 41 (stmmac-0:08) active
- [ 0.401786@1] PPP generic driver version 2.4.2
- [ 0.402056@1] NET: Registered protocol family 24
- [ 0.402177@1] usbcore: registered new interface driver smsc95xx
- [ 0.402555@1] platform c9000000.dwc3: Driver dwc3 requests probe deferral
- [ 0.402705@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.402730@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
- [ 0.402972@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.403291@1] usbcore: registered new interface driver usb-storage
- [ 0.403531@1] usbcore: registered new interface driver usbserial
- [ 0.403624@1] usbcore: registered new interface driver usbserial_generic
- [ 0.403711@1] usbserial: USB Serial support registered for generic
- [ 0.403799@1] usbcore: registered new interface driver pl2303
- [ 0.403888@1] usbserial: USB Serial support registered for pl2303
- [ 0.404462@1] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000fc000
- [ 0.404679@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
- [ 0.404709@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000fe080
- [ 0.405052@1] mousedev: PS/2 mouse device common for all mice
- [ 0.405304@1] i2c /dev entries driver
- [ 0.406747@1] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.406929@1] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.409315@1] usbcore: registered new interface driver usbhid
- [ 0.409338@1] usbhid: USB HID core driver
- [ 0.409570@1] ashmem: initialized
- [ 0.410001@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff800010a4c0
- [ 0.410039@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
- [ 0.410064@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
- [ 0.675596@0] hdmitx: plugin
- [ 0.730101@0] EDID Parser:
- [ 0.730577@0] hdmitx: edid: change preferred_mode from 0 to 16
- [ 0.730581@0] hdmitx: get PMT vic: 16
- [ 0.730585@0] hdmitx: edid: find IEEEOUT
- [ 0.730635@0] 00ffffffffffff005262060201010101011a010380a05a780ef09da355499b26
- [ 0.730635@0] 0f474aa7080081c08100810f814081809500b300d1c0023a801871382d40582c
- [ 0.730635@0] 450040846300001ea91a00a0500016303020450040e86300001a000000fc0054
- [ 0.730635@0] 4f53484942412d54560a2020000000fd00174c0f440f000a202020202020017d
- [ 0.730635@0]
- [ 0.730635@0]
- [ 0.730672@0] 020327704a1020220504030207060126090707150718830100006c030c001000
- [ 0.730672@0] 382dc015151f1f011d8018711c1620582c250040846300009e011d007251d01e
- [ 0.730672@0] 206e28550040846300001e8c0ad08a20e02d10103e9600b084430000188c0aa0
- [ 0.730672@0] 1451f01600267c4300b084430000980000000000000000000000000000000064
- [ 0.730672@0]
- [ 0.730672@0]
- [ 0.730684@0] hdmitx: video: get current mode: 576cvbs
- [ 0.730686@0] hdmitx: update physcial size: 1600 900
- [ 0.730688@0] hdmitx: video: 576cvbs not valid hdmi mode
- [ 0.730727@0] hdmtix: set audio
- [ 0.730735@0] hdmitx tx_aud_src = 0
- [ 0.730756@0] hdmitx: fs = 0, cd = 4, tmds_clk = 0
- [ 0.730759@0] hdmitx aud_n_para = 6144
- [ 2.089915@0] console [ttyS0] enabled
- [ 2.093992@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800010c4c0
- [ 2.100699@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
- [ 2.110730@0] hdmitx_hdcp_init
- [ 2.113627@0] aml_vrtc rtc.34: rtc core: registered aml_vrtc as rtc0
- [ 2.119537@0] secmon has 1 memory regions
- [ 2.123224@0] secmon: share in base: 0xffffff800011e000, share out base: 0xffffff800012a000
- [ 2.131483@0] secmon secmon.4: assigned reserved memory node linux,secmon ok
- [ 2.138498@0] secmon: probe done
- [ 2.142069@0] storage: storage in base: 0xffffff8001800000
- [ 2.147081@0] storage: storage out base: 0xffffff8001880000
- [ 2.152592@0] storage: storage block base: 0xffffff8001900000
- [ 2.158295@0] storage: probe done!
- [ 2.162277@0] aml_sd_emmc_probe: line 3608
- [ 2.165716@0] mmc driver version: 1.07, 2017-4-26: Support new emmc host controller for version 3
- [ 2.174932@0] aml_sd_emmc_reg_init 1152
- [ 2.178410@0] get property: ocr_avail, value:0x00200080
- [ 2.184764@0] get property: f_min, value:300000
- [ 2.190894@0] get property: f_max, value:50000000
- [ 2.197189@0] get property: max_req_size, value:0x00020000
- [ 2.203680@0] get property: pinname, str:emmc
- [ 2.209438@0] get property: card_type, value:1
- [ 2.215138@0] get property: gpio_dat3, str:
- [ 2.220586@0] get property: hw_reset, str:
- [ 2.226021@0] emmc:pdata->caps = c0000d47
- [ 2.229958@0] emmc:pdata->caps2 = 0
- [ 2.233409@0] emmc:pdata->pm_caps = 0
- [ 2.237047@0] storage 1, boot 1
- [ 2.240158@0] get_storage_dev return 1
- [ 2.275473@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.280989@0] aml_sd_emmc_probe: line 3608
- [ 2.281411@0] aml_sd_emmc_reg_init 1152
- [ 2.283617@0] get property: ocr_avail, value:0x00200080
- [ 2.290085@0] get property: f_min, value:400000
- [ 2.296188@0] get property: f_max, value:100000000
- [ 2.302543@0] get property: max_req_size, value:0x00020000
- [ 2.308968@0] get property: irq_in, value:3
- [ 2.314656@0] get property: irq_out, value:5
- [ 2.320453@0] get property: gpio_cd, str:
- [ 2.325788@0] get property: pinname, str:sd
- [ 2.331390@0] get property: jtag_pin, str:
- [ 2.336899@0] get property: card_type, value:5
- [ 2.342539@0] get property: gpio_dat3, str:
- [ 2.347966@0] sd:pdata->caps = 7
- [ 2.351139@0] sd:pdata->caps2 = 0
- [ 2.354417@0] sd:pdata->pm_caps = 0
- [ 2.378335@3] emmc: BKOPS_EN bit is not set
- [ 2.389868@3] emmc: try set sd/emmc to DDR mode
- [ 2.390323@3] emmc: new DDR MMC card at address 0001
- [ 2.393680@2] emmc: clock 50000000, 8-bit-bus-width
- [ 2.393680@2]
- [ 2.395676@2] [aml_is_card_insert] card OUT
- [ 2.395730@1] [aml_is_card_insert] card OUT
- [ 2.395741@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.395785@1] aml_sd_emmc_probe: line 3608
- [ 2.396154@1] aml_sd_emmc_reg_init 1152
- [ 2.396214@1] get property: ocr_avail, value:0x00200080
- [ 2.396216@1] get property: f_min, value:400000
- [ 2.396219@1] get property: f_max, value:200000000
- [ 2.396222@1] get property: max_req_size, value:0x00020000
- [ 2.396227@1] get property: pinname, str:sdio
- [ 2.396231@1] get property: vol_switch_delay, value:10
- [ 2.396232@1] get property: card_type, value:3
- [ 2.396264@1] sdio:pdata->caps = 7810f
- [ 2.396266@1] sdio:pdata->caps2 = 0
- [ 2.396269@1] sdio:pdata->pm_caps = 1
- [ 2.435475@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.435894@1] ion_dev has 1 memory regions
- [ 2.435956@1] ion_dev ion_dev.23: assigned reserved memory node linux,ion-dev ok
- [ 2.472393@1] ion_chunk_heap_create: base 2042626048 size 67108864 align 0
- [ 2.475835@1] ion_carveout_heap_create: base 1992294400 size 50331648 align 0
- [ 2.476323@1] fb: osd_init_module
- [ 2.476501@1] fb: viu vsync irq: 35
- [ 2.476510@1] meson-fb has 1 memory regions
- [ 2.476566@1] meson-fb meson-fb.17: assigned reserved memory node linux,meson-fb ok
- [ 2.476571@1] fb: osd_set_free_scale_mode_hw
- [ 2.476585@1] fb: osd_probe vinfo:ffffffc001a27c50
- [ 2.476591@1] fb: init fbdev bpp is:32
- [ 2.536743@1] fb: set osd0 reverse as NONE
- [ 2.540665@3] mmcblk0: emmc:0001 HAG2e 14.6 GiB
- [ 2.545205@3] mmcblk0boot0: emmc:0001 HAG2e partition 1 4.00 MiB
- [ 2.551262@3] mmcblk0boot1: emmc:0001 HAG2e partition 2 4.00 MiB
- [ 2.557285@3] mmcblk0gp0: emmc:0001 HAG2e partition 4 8.00 MiB
- [ 2.558483@0] fb: osd probe OK
- [ 2.558828@1] ge2d: ge2d_init_module
- [ 2.558848@1] ge2d: ge2d_dev major:242
- [ 2.559374@1] ge2d: vpu clock is 666660000 HZ
- [ 2.559394@1] ge2d: ge2d clock is 400 MHZ
- [ 2.559408@1] ge2d: ge2d: pdev=ffffffc00024b400, irq=182, rstc=0xffffffc05fbc8440, clk=ffffffc0001e2e00
- [ 2.559488@1] ge2d: mapped phy: 0xd0160000
- [ 2.559495@1] ge2d: ge2d start monitor
- [ 2.598840@3] mmcblk0rpmb: emmc:0001 HAG2e partition 3 4.00 MiB
- [ 2.598875@1] ge2d: ge2d workqueue monitor start
- [ 2.599157@1] codec:Amlogic A/V streaming port init
- [ 2.600944@1] codec:get gate demux control ok ffffffc05fbb2fc0
- [ 2.600949@1] codec:get gate parser_top control ok ffffffc05fbb2ec0
- [ 2.600953@1] codec:get gate vpu_intr control ok ffffffc05fbb2b40
- [ 2.600959@1] codec:get gate vdec control ok ffffffc05fbb27c0
- [ 2.638206@1] codec:[tsync_pcr_init]init success.
- [ 2.642509@1] codec:amvideocap_probe,amvideocap
- [ 2.646859@1] codec:use cma buf.
- [ 2.649952@0] mmcblk0: unknown partition table
- [ 2.655265@3] [mmc_read_partition_tbl] mmc read partition OK!
- [ 2.657347@1] codec:vdec_request_irq ffffffc0014e7070, vsync
- [ 2.665816@3] add_emmc_partition
- [ 2.669253@3] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
- [ 2.669255@1] codec:create_ge2d_work_queue video task ok
- [ 2.683013@3] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
- [ 2.683094@1] rdma_register, rdma_table_addr ffffff8000271000 rdma_table_addr_phy 75450000 reg_buf ffffffc05fad0000
- [ 2.683097@1] rdma_register success, handle 3 table_size 32768
- [ 2.683101@1] video_rdma:rdma_init video rdma handle = 3.
- [ 2.683110@1] codec:used fix clk for vdec clk source!
- [ 2.683117@1] codec:register clk_set_setting cpu[33]
- [ 2.684209@1] DI: di_module_init ok.
- [ 2.684216@1] DI: di_module_init: major 238
- [ 2.684497@1] DI: di_probe
- [ 2.732926@0] deinterlace has 1 memory regions
- [ 2.737184@0] deinterlace deinterlace.27: assigned reserved memory node linux,di_cma ok
- [ 2.745126@0] DI-di_probe: flag_cma: 1
- [ 2.745590@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
- [ 2.745823@3] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
- [ 2.745985@3] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
- [ 2.746142@3] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
- [ 2.746290@3] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
- [ 2.746427@3] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
- [ 2.746584@3] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
- [ 2.746731@3] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
- [ 2.746873@3] [mmcblk0p11] boot offset 0x000034400000, size 0x000002000000
- [ 2.747046@3] [mmcblk0p12] system offset 0x000036c00000, size 0x000080000000
- [ 2.747196@3] [mmcblk0p13] data offset 0x0000b7400000, size 0x0002f3c00000
- [ 2.747238@3] card key: card_blk_probe.
- [ 2.747243@3] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
- [ 2.747247@3] emmc key: emmc_key_init:552 ok.
- [ 2.855812@0] amlmmc_dtb_init: register dtb chardev
- [ 2.855813@0] DI: CMA size 0x2400000.
- [ 2.864381@0] di_irq:78,timerc_irq:38
- [ 2.864770@3] calc 5166c9fa, store 5166c9fa
- [ 2.872209@0] rdma_register, rdma_table_addr ffffff800017b000 rdma_table_addr_phy 7544a000 reg_buf ffffffc0002aa000
- [ 2.882370@0] rdma_register success, handle 4 table_size 8192
- [ 2.882925@3] calc 5166c9fa, store 5166c9fa
- [ 2.882928@3] total valid 2
- [ 2.883632@3] amlmmc_dtb_init: register dtb chardev OK
- [ 2.883633@3] Exit aml_emmc_partition_ops OK.
- [ 2.904357@0] DI: di_probe allocate rdma channel 4.
- [ 2.909122@0] DI: DI hw version 2.
- [ 2.912482@0] 0x000000db:Y=db,U=0,V=0
- [ 2.912543@3] mmcblk0gp0: unknown partition table
- [ 2.920910@0] 0x000000dc:Y=dc,U=0,V=0
- [ 2.924464@0] 0x000000dd:Y=dd,U=0,V=0
- [ 2.928091@0] 0x000000de:Y=de,U=0,V=0
- [ 2.928152@3] mmcblk0boot1: unknown partition table
- [ 2.936638@0] 0x000000df:Y=df,U=0,V=0
- [ 2.940294@0] 0x000000e0:Y=e0,U=0,V=0
- [ 2.943870@0] 0x000000e1:Y=e1,U=0,V=0
- [ 2.943934@3] mmcblk0boot0: unknown partition table
- [ 2.944299@3] clear_emmc_wait_flag
- [ 2.955778@0] 0x000000e2:Y=e2,U=0,V=0
- [ 2.959432@0] 0x000000e3:Y=e3,U=0,V=0
- [ 2.963014@0] 0x000000f0:Y=f0,U=0,V=0
- [ 2.966645@0] 0x000000f1:Y=f1,U=0,V=0
- [ 2.970259@0] 0x000000f2:Y=f2,U=0,V=0
- [ 2.973881@0] 0x000000f3:Y=f3,U=0,V=0
- [ 2.977509@0] 0x000000f4:Y=f4,U=0,V=0
- [ 2.981150@0] 0x000000f5:Y=f5,U=0,V=0
- [ 2.984749@0] 0x000000f6:Y=f6,U=0,V=0
- [ 2.988378@0] 0x000000f7:Y=f7,U=0,V=0
- [ 2.991994@0] 0x000000f8:Y=f8,U=0,V=0
- [ 2.995624@0] 0x000000f9:Y=f9,U=0,V=0
- [ 2.999261@0] 0x000000fa:Y=fa,U=0,V=0
- [ 3.002861@0] 0x000000fb:Y=fb,U=0,V=0
- [ 3.006488@0] 0x000000fc:Y=fc,U=0,V=0
- [ 3.010197@3] DI: di_probe:Di use HRTIMER
- [ 3.014492@3] efusekeynum: 4
- [ 3.016953@3] efusekeyname: mac offset: 0 size: 6
- [ 3.023319@3] efusekeyname: mac_bt offset: 6 size: 6
- [ 3.029696@3] efusekeyname: mac_wifi offset: 12 size: 6
- [ 3.036079@3] efusekeyname: usid offset: 18 size: 16
- [ 3.042798@3] efuse efuse.10: probe OK!
- [ 3.046654@3] key unify config unifykey-num is 14
- [ 3.050967@3] key unify fact unifykey-num is 14
- [ 3.055391@3] aml_unifykeys_probe:1280=============unifykey_devno:eb00000
- [ 3.062442@3] 6unifykey: device unifykeys created ok
- [ 3.067257@3] 6aml_unifykeys_init done!
- [ 3.071010@3] PPMGRDRV: warn: ppmgr module init func called
- [ 3.076681@3] PPMGRDRV: err: ppmgr_driver_probe called
- [ 3.081617@3] ppmgr has 1 memory regions
- [ 3.085552@3] PPMGRDRV: info: ppmgr_dev major:234
- [ 3.090497@3] PPMGRDRV: info: ppmgr_probe done
- [ 3.094967@3] amlogic rfkill init
- [ 3.097955@3] enter bt_probe of_node
- [ 3.101387@3] not get gpio_en
- [ 3.104292@3] power on valid level is high
- [ 3.108182@3] bt: power_on_pin_OD = 0;
- [ 3.525680@3] audio_dsp: [dsp]register dsp to char divece(257)
- [ 3.526660@3] amaudio: amaudio: driver amaudio succuess!
- [ 3.531832@3] [RX]-hdmirx: hdmirx_init.
- [ 3.534939@3] ESM HLD: Initializing...
- [ 3.538661@3] ESM HLD: Registering device range 'esm_rx'...
- [ 3.544192@3] ESM HLD: Device range 'esm_rx' has been registered.
- [ 3.550213@3] ESM HLD: Creating class /sys/class/elliptic_rx...
- [ 3.556169@3] ESM HLD: The class /sys/class/elliptic_rx has been created.
- [ 3.562804@3] ESM HLD: Creating device 'esm_rx'...
- [ 3.567768@3] ESM HLD: Device 'esm_rx' has been created.
- [ 3.572813@3] ESM HLD: Done initializing the HLD driver.
- [ 3.578071@3] aml_vecm_init:module init
- [ 3.582049@3]
- [ 3.582049@3] VECM probe start
- [ 3.586992@3] Can't find wb_sel.
- [ 3.589882@3] dolby_vision_init_receiver(dvel)
- [ 3.594293@3] dolby_vision_init_receiver: dvel
- [ 3.598834@3] aml_vecm_probe: ok
- [ 3.602667@3] saradc c1108680.saradc: initialized by BL30
- [ 3.607235@3] saradc c1108680.saradc: calibration start:
- [ 3.612535@3] saradc c1108680.saradc: nominal=0, value=7
- [ 3.617786@3] saradc c1108680.saradc: nominal=256, value=232
- [ 3.623395@3] saradc c1108680.saradc: nominal=512, value=460
- [ 3.629000@3] saradc c1108680.saradc: nominal=768, value=691
- [ 3.634604@3] saradc c1108680.saradc: nominal=1023, value=918
- [ 3.640256@3] saradc c1108680.saradc: calibration end: coef=4568
- [ 3.646723@3] gpio-key gpio_keypad.50: gpio_key: 0 name(power) pin()
- [ 3.652514@3] gpio-key gpio_keypad.50: amlogic_gpio_name_map_num pin 0!::
- [ 3.659248@3] gpio-key gpio_keypad.50: gpio_key: 0 power(147)
- [ 3.664960@3] gpio-key gpio_keypad.50: start setup_timer
- [ 3.670189@3] gpio-key gpio_keypad.50: power key(116) registed.
- [ 3.676347@2] input: gpio_keypad as /devices/gpio_keypad.50/input/input0
- [ 3.682963@2] gpio-key gpio_keypad.50: gpio keypad register input device completed.
- [ 3.690295@2] input input0: gpio keypad major:231
- [ 3.697333@2] input: cec_input as /devices/virtual/input/input1
- [ 3.701117@2] cectx aocec: aml_cec_probe(): no hdmirx reg resource
- [ 3.706934@2] cectx aocec: aml_cec_probe(): no hhi reg resource
- [ 3.712793@2] cec: wake up flag:0
- [ 3.719252@2] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
- [ 3.724756@2] aml-i2s-dai I2S.42: I2S Mic is in platform!
- [ 3.728565@2] aml_pcm_dai: pcm mode detection =1
- [ 3.733858@2] aml_snd_card: aml_multi_dev_parse_of ...
- [ 3.737818@2] aml_snd_card: no multi dev!
- [ 3.765488@3] input input0: key 116 up
- [ 3.945652@2] aml_snd_card: headphone detection disable=1
- [ 3.946436@2] aml_snd_m8_card aml_m8_snd.49: T9015-audio-hifi <-> I2S.42 mapping ok
- [ 3.953677@2] aml_snd_m8_card aml_m8_snd.49: dit-hifi <-> SPDIF.43 mapping ok
- [ 3.960197@2] aml_pcm: enter aml_pcm_new dai->name: PCM.44 dai->id: 0
- [ 3.966614@2] aml_snd_m8_card aml_m8_snd.49: pcm2bt-pcm <-> PCM.44 mapping ok
- [ 3.973559@2] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTL
- [ 3.981137@2] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
- [ 3.989933@2] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTR
- [ 3.997528@2] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
- [ 4.008345@2] TCP: cubic registered
- [ 4.010382@2] NET: Registered protocol family 10
- [ 4.015031@2] NET: Registered protocol family 17
- [ 4.018957@2] Key type dns_resolver registered
- [ 4.024772@2] Registering SWP/SWPB emulation handler
- [ 4.028955@2] regulator-dummy: disabling
- [ 4.733736@2] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
- [ 4.735735@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.740792@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 4.749090@3] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
- [ 4.754694@3] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.761487@3] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.768813@3] usb usb1: Product: xHCI Host Controller
- [ 4.773796@3] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
- [ 4.779405@3] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 4.785084@2] hub 1-0:1.0: USB hub found
- [ 4.788326@2] hub 1-0:1.0: 2 ports detected
- [ 4.792652@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.798049@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 4.805906@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 4.812691@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.820028@2] usb usb2: Product: xHCI Host Controller
- [ 4.825024@2] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
- [ 4.830637@2] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 4.836198@2] hub 2-0:1.0: USB hub found
- [ 4.839547@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 4.847321@0] console [netcon0] enabled
- [ 4.850552@0] netconsole: network logging started
- [ 4.855240@0] aml_vrtc rtc.34: setting system clock to 2015-01-01 00:00:12 UTC (1420070412)
- [ 4.864491@0] cpufreq-scpi cpufreq-meson.7: enter cpufreq
- [ 4.869004@0] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
- [ 4.875491@0] gxbb_pm: enter meson_pm_probe!
- [ 4.879135@0] gxbb_pm: meson_pm_probe done
- [ 4.883957@0] cpucore_cooling_register, max_cpu_core_num:4
- [ 4.903985@0] ALSA device list:
- [ 4.904018@0] #0: AML-M8AUDIO
- [ 4.905220@0] Freeing unused kernel memory: 748K (ffffffc001914000 - ffffffc0019cf000)
- [ 4.954249@3] vout_serve: vmode set to 1080p60hz
- [ 4.954249@3]
- [ 4.954301@3] fb: current vmode=576cvbs, cmd: 0x50000
- [ 4.954310@3] tv_vout: tv_set_current_vmode[930]fps_target_mode=19
- [ 4.954316@3] tv_vout: mode is 19,sync_duration_den=1,sync_duration_num=60
- [ 4.954331@3] tv_vout: TV mode 1080p60hz selected.
- [ 4.954337@3]
- [ 4.954337@3] vdac_enable: on:0,module_sel:8
- [ 4.954348@3]
- [ 4.954348@3] vdac_enable: on:0,module_sel:8
- [ 4.954358@3] tv_vout: new mode =1080p60hz set ok
- [ 4.954362@3] vout_serve: vinfo mode is: 1080p60hz
- [ 4.954366@3] vout_serve: new mode 1080p60hz
- [ 4.954366@3] set ok
- [ 4.954386@3] hdmitx: video: get current mode: 1080p60hz
- [ 4.954390@3] hdmitx: update rx hdr info 0
- [ 4.954394@3] hdmitx: update physcial size: 1600 900
- [ 4.954442@3] hdmitx: system: already init VIC = 0 Now VIC = 16
- [ 4.958471@3] hdmitx: system: hdmirx version is 1.4 or below
- [ 4.958482@3] hdmitx div40: 0
- [ 4.985488@3] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
- [ 4.985502@3] hdmitx: system: set pll VIC:16
- [ 4.985512@3] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0
- [ 4.985529@3] config HPLL = 2970000
- [ 4.985607@3] HPLL: 0x4000027b
- [ 4.985614@3] config HPLL done
- [ 4.985631@3] set_hpll_od3_clk_div[825] div = 6
- [ 4.985645@3] j = 4 vid_clk_div = 1
- [ 4.986098@3] HDMITX-DWC addr=0x10004006 rd_data=0x48
- [ 4.986109@3] Error: HDMITX-DWC exp_data=0xff mask=0x9f
- [ 5.001505@3] hdmitx20: rx scrambler status is not ok
- [ 5.115646@0] usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [ 5.121541@3] Sink is HDMI device
- [ 5.121580@3] hdmitx: system: packet: can't get vendor data
- [ 5.121602@3] 1080p60hz 60 1
- [ 5.121624@3] 1080p60hz 60 1
- [ 5.121642@3] hdmtix: set audio
- [ 5.121670@3] hdmitx tx_aud_src = 0
- [ 5.121728@3] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
- [ 5.121746@3] hdmitx aud_n_para = 6144
- [ 5.121893@3] fb: current vmode=1080p60hz, cmd: 0x10000
- [ 5.127986@1] fb: osd_open index=0,open_count=1
- [ 5.129116@1] fb: Frame buffer memory assigned at
- [ 5.129142@1] fb: 0, phy: 0x000000003e000000, vir:0xffffff8005e80000, size=24900K
- [ 5.129142@1]
- [ 5.129173@1] fb: ---------------clear fb0 memory ffffff8005e80000
- [ 5.168867@1] fb: osd[0] canvas.idx =0x40
- [ 5.168883@1] fb: osd[0] canvas.addr=0x3e000000
- [ 5.168892@1] fb: osd[0] canvas.width=7680
- [ 5.168900@1] fb: osd[0] canvas.height=3240
- [ 5.168908@1] fb: osd[0] frame.width=1920
- [ 5.168916@1] fb: osd[0] frame.height=1080
- [ 5.185372@0] fb: osd[0] canvas.idx =0x40
- [ 5.185376@0] fb: osd[0] canvas.addr=0x3e000000
- [ 5.185380@0] fb: osd[0] canvas.width=7680
- [ 5.185383@0] fb: osd[0] canvas.height=2160
- [ 5.185386@0] fb: osd[0] frame.width=1920
- [ 5.185389@0] fb: osd[0] frame.height=1080
- [ 5.202334@0] fb: osd_release now.index=0,open_count=1
- [ 5.205936@1] fb: osd_open index=1,open_count=1
- [ 5.206004@1] fb: Frame buffer memory assigned at
- [ 5.206019@1] fb: 1, phy: 0x000000003f851000, vir:0xffffff8007700000, size=1024K
- [ 5.206019@1]
- [ 5.206035@1] fb: fb1 open, logo index:1
- [ 5.206376@1] fb: osd_release now.index=1,open_count=1
- [ 5.206927@3] fb: osd_set_free_scale_enable_hw
- [ 5.218884@0] fb: osd_set_free_scale_enable_hw
- [ 5.235853@0] vfm_map_store:rm default
- [ 5.235853@0]
- [ 5.235981@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- [ 5.235981@0]
- [ 5.236171@0] fb: osd[0] enable: 1 (sh)
- [ 5.252153@0] fb: osd[1] enable: 0 (sh)
- [ 5.258647@0] usb 1-1: New USB device found, idVendor=0930, idProduct=6544
- [ 5.258667@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.258683@0] usb 1-1: Product: DataTraveler 2.0
- [ 5.258697@0] usb 1-1: Manufacturer: Kingston
- [ 5.258712@0] usb 1-1: SerialNumber: 0019E002E576C8B18E9A0070
- [ 5.260086@0] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
- [ 5.261146@0] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
- [ 5.262234@0] usb-storage 1-1:1.0: USB Mass Storage device detected
- [ 5.263294@0] scsi0 : usb-storage 1-1:1.0
- [ 5.336342@2] fb: osd_open index=0,open_count=1
- [ 5.352024@2] Console: switching to colour frame buffer device 240x67
- [ 5.385536@0] usb 1-2: new low-speed USB device number 3 using xhci-hcd
- [ 5.405838@2] dwc_otg dwc2_a: dwc_otg_driver_probe(ffffffc0002f0c00)
- [ 5.405927@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
- [ 5.405942@2] dwc_otg_driver_probe host only, not probe usb_otg!!!
- [ 5.468515@3] EXT4-fs (mmcblk0p12): couldn't mount as ext3 due to feature incompatibilities
- [ 5.468954@3] EXT4-fs (mmcblk0p12): couldn't mount as ext2 due to feature incompatibilities
- [ 5.472839@2] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.476662@1] fb: osd_open index=0,open_count=2
- [ 5.477058@1] fb: osd_release now.index=0,open_count=2
- [ 5.530018@0] usb 1-2: New USB device found, idVendor=276d, idProduct=1160
- [ 5.530033@0] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.530039@0] usb 1-2: Product: G Mouse
- [ 5.530045@0] usb 1-2: Manufacturer: YSTEK
- [ 5.538824@2] input: YSTEK G Mouse as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:276D:1160.0001/input/input2
- [ 5.539401@2] hid-generic 0003:276D:1160.0001: input,hidraw0: USB HID v1.10 Mouse [YSTEK G Mouse] on usb-xhci-hcd.0.auto-2/input0
- [ 5.596870@3] fb: osd_open index=0,open_count=2
- [ 5.689859@3] fb: osd_release now.index=0,open_count=2
- [ 5.702585@3] EXT4-fs (mmcblk0p13): couldn't mount as ext3 due to feature incompatibilities
- [ 5.703022@3] EXT4-fs (mmcblk0p13): couldn't mount as ext2 due to feature incompatibilities
- [ 5.936239@3] EXT4-fs (mmcblk0p13): recovery complete
- [ 5.936412@3] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.256217@0] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
- [ 6.257220@2] sd 0:0:0:0: [sda] 15646656 512-byte logical blocks: (8.01 GB/7.45 GiB)
- [ 6.257560@2] sd 0:0:0:0: [sda] Write Protect is off
- [ 6.257583@2] sd 0:0:0:0: [sda] Mode Sense: 65 44 09 30
- [ 6.257828@2] sd 0:0:0:0: [sda] No Caching mode page found
- [ 6.257843@2] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 6.259358@2] sd 0:0:0:0: [sda] No Caching mode page found
- [ 6.259380@2] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 6.260548@2] sda: sda1 sda2
- [ 6.262196@2] sd 0:0:0:0: [sda] No Caching mode page found
- [ 6.262212@2] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 6.262222@2] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 19.519032@0] random: nonblocking pool is initialized
- [ 69.284593@1] systemd[1]: System time before build time, advancing clock.
- [ 69.298716@1] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 69.299176@1] systemd[1]: Detected architecture arm64.
- [ 69.299416@1] systemd[1]: Set hostname to <LibreELEC>.
- [ 69.377978@1] systemd[1]: Created slice System Slice.
- [ 69.379992@1] systemd[1]: Mounting Variable Directory...
- [ 69.380451@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 69.380792@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 69.381190@1] systemd[1]: Listening on udev Control Socket.
- [ 69.381531@1] systemd[1]: Listening on udev Kernel Socket.
- [ 69.381864@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 69.384335@1] systemd[1]: Mounting Debug File System...
- [ 69.387213@1] systemd[1]: Starting Show Version...
- [ 69.387752@1] systemd[1]: Created slice User and Session Slice.
- [ 69.388692@1] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 69.388971@1] systemd[1]: Reached target RPC Port Mapper.
- [ 69.392184@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 69.392320@1] systemd[1]: Starting Debug Shell on /dev/ttyS0...
- [ 69.396081@1] systemd[1]: Mounting POSIX Message Queue File System...
- [ 69.396420@1] systemd[1]: Reached target Slices.
- [ 69.397192@1] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 69.397502@1] systemd[1]: Reached target Paths.
- [ 69.398081@1] systemd[1]: Listening on Journal Socket.
- [ 69.401771@1] systemd[1]: Starting Mounting swapfile...
- [ 69.404705@1] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 69.412869@1] systemd[1]: Starting Load Kernel Modules...
- [ 69.416033@1] systemd[1]: Starting Setup machine-id...
- [ 69.427968@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 69.436930@1] systemd[1]: Starting Samba Configuration...
- [ 69.445090@1] systemd[1]: Mounted Debug File System.
- [ 69.445349@1] systemd[1]: Mounted POSIX Message Queue File System.
- [ 69.445550@1] systemd[1]: Mounted Variable Directory.
- [ 69.447546@1] systemd[1]: Started Show Version.
- [ 69.450405@1] systemd[1]: Started Debug Shell on /dev/ttyS0.
- [ 69.453167@1] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 69.454584@1] systemd[1]: Started Setup machine-id.
- [ 69.456591@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 69.456724@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 69.465025@1] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 69.466509@2] media: Unknown symbol kmem_cache_alloc_trace (err 0)
- [ 69.466618@2] media: Unknown symbol _mcount (err 0)
- [ 69.468401@1] systemd[1]: Starting Journal Service...
- [ 69.477019@3] systemd[1]: Starting udev Coldplug all Devices...
- [ 69.479750@2] aml_fd628: Unknown symbol kmem_cache_alloc_trace (err 0)
- [ 69.479837@2] aml_fd628: Unknown symbol _mcount (err 0)
- [ 69.485455@3] systemd[1]: Started Samba Configuration.
- [ 69.491994@2] mali: Unknown symbol kmem_cache_alloc_trace (err 0)
- [ 69.492353@2] mali: Unknown symbol _mcount (err 0)
- [ 69.496378@3] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
- [ 69.497286@3] systemd[1]: Failed to start Load Kernel Modules.
- [ 69.498326@3] systemd[1]: systemd-modules-load.service: Unit entered failed state.
- [ 69.498372@3] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
- [ 69.499472@3] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 69.507959@1] systemd[1]: Reached target Local File Systems (Pre).
- [ 69.511524@1] systemd[1]: Starting Apply Kernel Variables...
- [ 69.515083@1] systemd[1]: Mounting Configuration File System...
- [ 69.517625@1] systemd[1]: Started Mounting swapfile.
- [ 69.518653@1] systemd[1]: Reached target Swap.
- [ 69.521424@1] systemd[1]: Mounting Temporary Directory...
- [ 69.534286@1] systemd[1]: Mounted Configuration File System.
- [ 69.541006@1] systemd[1]: Mounted Temporary Directory.
- [ 69.542478@1] systemd[1]: Reached target Local File Systems.
- [ 69.546377@1] systemd[1]: Started Apply Kernel Variables.
- [ 69.631362@1] systemd[1]: Started Journal Service.
- [ 69.657003@3] systemd-journald[2084]: Received request to flush runtime journal from PID 1
- [ 70.746896@1] fb: osd_release now.index=0,open_count=1
- [ 70.746952@1] Console: switching to colour dummy device 80x25
- [ 70.754395@0] rc_core: Unknown symbol kmem_cache_alloc_trace (err 0)
- [ 70.754530@0] rc_core: Unknown symbol _mcount (err 0)
- [ 70.769522@3] Triggered SDIO WiFi power on and bus rescan.
- [ 70.769583@3] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Disable! 240
- [ 70.856661@0] mali: Unknown symbol kmem_cache_alloc_trace (err 0)
- [ 70.857044@0] mali: Unknown symbol _mcount (err 0)
- [ 71.075583@3] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Enable! 240
- [ 71.276660@0] libphy: set driving length c
- [ 71.276839@0] libphy: set PLL minimum jitter
- [ 71.356796@0] libphy: set driving length c
- [ 71.356896@0] libphy: set PLL minimum jitter
- [ 71.388126@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 71.388145@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 71.388176@2] aml_sd_emmc_data_thread 2642 sdio: cmd:52
- [ 71.389235@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 71.389253@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 71.389292@2] aml_sd_emmc_data_thread 2642 sdio: cmd:52
- [ 71.394098@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 71.394115@2] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 71.394164@2] aml_sd_emmc_data_thread 2642 sdio: cmd:8
- [ 71.413653@2] sdio: new high speed SDIO card at address 0001
- [ 71.413675@1] sdio: clock 50000000, 4-bit-bus-width
- [ 71.413675@1]
- [ 71.425985@1] 8021q: Unknown symbol kmem_cache_alloc_trace (err 0)
- [ 71.426196@1] 8021q: Unknown symbol _mcount (err 0)
- [ 71.434076@2] [sdio_reinit] finish
- [ 71.441892@1] 8021q: Unknown symbol kmem_cache_alloc_trace (err 0)
- [ 71.442084@1] 8021q: Unknown symbol _mcount (err 0)
- [ 71.458317@2] cfg80211: Unknown symbol trace_buffer_unlock_commit (err 0)
- [ 71.458352@2] cfg80211: Unknown symbol ftrace_raw_output_prep (err 0)
- [ 71.458391@2] cfg80211: Unknown symbol trace_seq_printf (err 0)
- [ 71.458424@2] cfg80211: Unknown symbol filter_check_discard (err 0)
- [ 71.458443@2] cfg80211: Unknown symbol trace_event_raw_init (err 0)
- [ 71.458482@2] cfg80211: Unknown symbol event_triggers_call (err 0)
- [ 71.458512@2] cfg80211: Unknown symbol kmem_cache_alloc_trace (err 0)
- [ 71.458581@2] cfg80211: Unknown symbol ftrace_event_reg (err 0)
- [ 71.458741@2] cfg80211: Unknown symbol trace_define_field (err 0)
- [ 71.458748@2] cfg80211: Unknown symbol trace_event_buffer_lock_reserve (err 0)
- [ 71.458819@2] cfg80211: Unknown symbol ring_buffer_event_data (err 0)
- [ 71.458835@2] cfg80211: Unknown symbol event_triggers_post_call (err 0)
- [ 71.458900@2] cfg80211: Unknown symbol _mcount (err 0)
- [ 71.458926@2] cfg80211: Unknown symbol ring_buffer_discard_commit (err 0)
- [ 71.566960@2] EXT4-fs (sda2): recovery complete
- [ 71.566989@2] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 71.576853@1] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 0 to 9600
- [ 71.576942@1] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 115200
- [ 71.577074@1] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 115200
- [ 71.585125@2] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 71.713501@0] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 2000000
- [ 71.713548@0] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 2000000 to 2000000
- [ 72.308330@2] 6lowpan_iphc: Unknown symbol _mcount (err 0)
- [ 72.728557@0] libphy: stmmac-0:08 - Link is Up - 100/Full
- [ 73.699055@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 73.699130@2] aml_spdif_dai: share the same clock
- [ 73.699135@2] aml_spdif_dai: set 958 audio clk div 2
- [ 73.699144@2] aml_audio_hw: IEC958 PCM32
- [ 73.699152@2] hdmitx: audio: aout notify rate 44100
- [ 73.699157@2] hdmitx: audio: aout notify size 32
- [ 73.699161@2] hdmitx: audio: aout notify format CT_PCM
- [ 73.699167@2] hdmtix: set audio
- [ 73.699180@2] hdmitx tx_aud_src = 0
- [ 73.699206@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 73.699211@2] hdmitx aud_n_para = 6272
- [ 73.699279@2] hdmitx: audio: Audio Type: PCM
- [ 73.699284@2] hdmitx: audio: set audio param
- [ 73.699296@2] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 73.699675@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 73.699682@0] aml_spdif_dai: share the same clock
- [ 73.699691@0] aml_audio_hw: IEC958 PCM32
- [ 73.699697@0] hdmitx: audio: aout notify rate 44100
- [ 73.699701@0] hdmitx: audio: aout notify size 32
- [ 73.699704@0] hdmitx: audio: no update
- [ 73.699713@0] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 73.699930@0] channel count should be 8, we got 2 aborting
- [ 73.702759@0] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
- [ 73.702795@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
- [ 73.763170@0] codec:vdec_create instance ffffff8007980000, total 1
- [ 73.763204@0] codec:vdec_release instance ffffff8007980000, total 0
- [ 73.763768@0] fb: osd_set_free_scale_enable_hw
- [ 73.768742@0] fb: osd_set_free_scale_enable_hw
- [ 73.785539@0] fb: osd_open index=0,open_count=1
- [ 73.801993@0] fb: osd_release now.index=0,open_count=1
- [ 73.819274@0] kodi.bin[2890]: unhandled level 3 translation fault (11) at 0x00000000, esr 0x83000007
- [ 73.819290@0] pgd = ffffffc05feb2000
- [ 73.819295@0] [00000000] *pgd=000000005e917003, *pmd=000000005e918003, *pte=0000000000000000
- [ 73.819302@0]
- [ 73.819311@0] CPU: 0 PID: 2890 Comm: kodi.bin Tainted: G O 3.14.29 #1
- [ 73.819317@0] task: ffffffc05fe5a000 ti: ffffffc06059c000 task.ti: ffffffc06059c000
- [ 73.819328@0] PC is at 0x0
- [ 73.819332@0] LR is at 0x3e3255
- [ 73.819336@0] pc : [<0000000000000000>] lr : [<00000000003e3255>] pstate: 00000010
- [ 73.819340@0] sp : 00000000ffcac480
- [ 73.819343@0] x12: 0000000000000001
- [ 73.819347@0] x11: 0000000000000000 x10: 00000000f740bfb4
- [ 73.819352@0] x9 : 0000000000000000 x8 : 00000000011fcb20
- [ 73.819357@0] x7 : 0000000000000001 x6 : 00000000012117fc
- [ 73.819362@0] x5 : 0000000001278cac x4 : 0000000001278cac
- [ 73.819367@0] x3 : 0000000000000000 x2 : 00000000012118c8
- [ 73.819379@0] x1 : 0000000001278cac x0 : 0000000001278c70
- [ 73.819383@0]
- [ 73.917476@3] aml_snd_m8_card aml_m8_snd.49: I2S playback disable
- [ 73.917500@3] aml_snd_m8_card aml_m8_snd.49: IEC958 playback disable
- [ 77.365582@0] tx queueing
- [ 80.664146@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 80.664165@2] aml_spdif_dai: share the same clock
- [ 80.664175@2] aml_audio_hw: IEC958 PCM32
- [ 80.664183@2] hdmitx: audio: aout notify rate 44100
- [ 80.664188@2] hdmitx: audio: aout notify size 32
- [ 80.664192@2] hdmitx: audio: no update
- [ 80.664205@2] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 80.664586@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 80.664596@0] aml_spdif_dai: share the same clock
- [ 80.664604@0] aml_audio_hw: IEC958 PCM32
- [ 80.664610@0] hdmitx: audio: aout notify rate 44100
- [ 80.664614@0] hdmitx: audio: aout notify size 32
- [ 80.664618@0] hdmitx: audio: no update
- [ 80.664626@0] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 80.664842@0] channel count should be 8, we got 2 aborting
- [ 80.668133@0] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
- [ 80.668162@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
- [ 80.719921@0] codec:vdec_create instance ffffff80079a0000, total 1
- [ 80.719956@0] codec:vdec_release instance ffffff80079a0000, total 0
- [ 80.720456@0] fb: osd_set_free_scale_enable_hw
- [ 80.735402@0] fb: osd_set_free_scale_enable_hw
- [ 80.752188@0] fb: osd_open index=0,open_count=1
- [ 80.752219@0] fb: osd_release now.index=0,open_count=1
- [ 80.762870@0] kodi.bin[3064]: unhandled level 3 translation fault (11) at 0x00000000, esr 0x83000007
- [ 80.762890@0] pgd = ffffffc05fab5000
- [ 80.762898@0] [00000000] *pgd=0000000073b2b003, *pmd=000000005f7d3003, *pte=0000000000000000
- [ 80.762911@0]
- [ 80.762925@0] CPU: 0 PID: 3064 Comm: kodi.bin Tainted: G O 3.14.29 #1
- [ 80.762935@0] task: ffffffc05f8c2000 ti: ffffffc060aac000 task.ti: ffffffc060aac000
- [ 80.762951@0] PC is at 0x0
- [ 80.762958@0] LR is at 0x3e3255
- [ 80.762965@0] pc : [<0000000000000000>] lr : [<00000000003e3255>] pstate: 00000010
- [ 80.762972@0] sp : 00000000ff9452b0
- [ 80.762978@0] x12: 0000000000000001
- [ 80.762984@0] x11: 0000000000000000 x10: 00000000f7715fb4
- [ 80.762993@0] x9 : 0000000000000000 x8 : 0000000001821b20
- [ 80.763001@0] x7 : 0000000000000001 x6 : 00000000018367fc
- [ 80.763010@0] x5 : 000000000189dcac x4 : 000000000189dcac
- [ 80.763019@0] x3 : 0000000000000000 x2 : 00000000018368c8
- [ 80.763027@0] x1 : 000000000189dcac x0 : 000000000189dc70
- [ 80.763035@0]
- [ 80.897731@3] aml_snd_m8_card aml_m8_snd.49: I2S playback disable
- [ 80.897754@3] aml_snd_m8_card aml_m8_snd.49: IEC958 playback disable
- [ 87.140145@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 87.140162@0] aml_spdif_dai: share the same clock
- [ 87.140173@0] aml_audio_hw: IEC958 PCM32
- [ 87.140181@0] hdmitx: audio: aout notify rate 44100
- [ 87.140185@0] hdmitx: audio: aout notify size 32
- [ 87.140189@0] hdmitx: audio: no update
- [ 87.140203@0] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 87.140584@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 87.140593@2] aml_spdif_dai: share the same clock
- [ 87.140601@2] aml_audio_hw: IEC958 PCM32
- [ 87.140607@2] hdmitx: audio: aout notify rate 44100
- [ 87.140611@2] hdmitx: audio: aout notify size 32
- [ 87.140615@2] hdmitx: audio: no update
- [ 87.140624@2] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 87.140840@2] channel count should be 8, we got 2 aborting
- [ 87.143633@2] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
- [ 87.143656@2] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
- [ 87.196498@2] codec:vdec_create instance ffffff80079c0000, total 1
- [ 87.196531@2] codec:vdec_release instance ffffff80079c0000, total 0
- [ 87.197029@2] fb: osd_set_free_scale_enable_hw
- [ 87.202010@0] fb: osd_set_free_scale_enable_hw
- [ 87.218812@0] fb: osd_open index=0,open_count=1
- [ 87.218839@0] fb: osd_release now.index=0,open_count=1
- [ 87.225246@0] kodi.bin[3105]: unhandled level 3 translation fault (11) at 0x00000000, esr 0x83000007
- [ 87.225260@0] pgd = ffffffc05fa35000
- [ 87.225265@0] [00000000] *pgd=000000005ffb6003, *pmd=000000005fa85003, *pte=0000000000000000
- [ 87.225274@0]
- [ 87.225283@0] CPU: 0 PID: 3105 Comm: kodi.bin Tainted: G O 3.14.29 #1
- [ 87.225288@0] task: ffffffc05fe5a000 ti: ffffffc060a10000 task.ti: ffffffc060a10000
- [ 87.225299@0] PC is at 0x0
- [ 87.225303@0] LR is at 0x3e3255
- [ 87.225307@0] pc : [<0000000000000000>] lr : [<00000000003e3255>] pstate: 00000010
- [ 87.225311@0] sp : 00000000ff8163e0
- [ 87.225314@0] x12: 0000000000000001
- [ 87.225318@0] x11: 0000000000000000 x10: 00000000f7374fb4
- [ 87.225323@0] x9 : 0000000000000000 x8 : 0000000001637b20
- [ 87.225328@0] x7 : 0000000000000001 x6 : 000000000164c7fc
- [ 87.225333@0] x5 : 00000000016b3cac x4 : 00000000016b3cac
- [ 87.225338@0] x3 : 0000000000000000 x2 : 000000000164c8c8
- [ 87.225343@0] x1 : 00000000016b3cac x0 : 00000000016b3c70
- [ 87.225347@0]
- [ 87.357344@0] aml_snd_m8_card aml_m8_snd.49: I2S playback disable
- [ 87.357364@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback disable
- [ 93.640066@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 93.640084@2] aml_spdif_dai: share the same clock
- [ 93.640094@2] aml_audio_hw: IEC958 PCM32
- [ 93.640102@2] hdmitx: audio: aout notify rate 44100
- [ 93.640106@2] hdmitx: audio: aout notify size 32
- [ 93.640111@2] hdmitx: audio: no update
- [ 93.640124@2] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 93.640509@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 93.640519@0] aml_spdif_dai: share the same clock
- [ 93.640527@0] aml_audio_hw: IEC958 PCM32
- [ 93.640533@0] hdmitx: audio: aout notify rate 44100
- [ 93.640538@0] hdmitx: audio: aout notify size 32
- [ 93.640541@0] hdmitx: audio: no update
- [ 93.640551@0] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 93.640777@0] channel count should be 8, we got 2 aborting
- [ 93.643604@0] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
- [ 93.643637@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
- [ 93.696090@0] codec:vdec_create instance ffffff80079e8000, total 1
- [ 93.696124@0] codec:vdec_release instance ffffff80079e8000, total 0
- [ 93.696640@0] fb: osd_set_free_scale_enable_hw
- [ 93.702015@0] fb: osd_set_free_scale_enable_hw
- [ 93.718839@0] fb: osd_open index=0,open_count=1
- [ 93.718867@0] fb: osd_release now.index=0,open_count=1
- [ 93.726517@0] kodi.bin[3144]: undefined instruction: pc=00000000f53bb8c4
- [ 93.726534@0] Code: f53bb8ac f53bb8ac f53bb8b4 f53bb8b4 (f53bb8bc)
- [ 93.860896@0] aml_snd_m8_card aml_m8_snd.49: I2S playback disable
- [ 93.860919@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback disable
- [ 100.137653@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 100.137671@0] aml_spdif_dai: share the same clock
- [ 100.137680@0] aml_audio_hw: IEC958 PCM32
- [ 100.137688@0] hdmitx: audio: aout notify rate 44100
- [ 100.137692@0] hdmitx: audio: aout notify size 32
- [ 100.137696@0] hdmitx: audio: no update
- [ 100.137711@0] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 100.138095@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 100.138104@2] aml_spdif_dai: share the same clock
- [ 100.138112@2] aml_audio_hw: IEC958 PCM32
- [ 100.138118@2] hdmitx: audio: aout notify rate 44100
- [ 100.138122@2] hdmitx: audio: aout notify size 32
- [ 100.138126@2] hdmitx: audio: no update
- [ 100.138135@2] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
- [ 100.138351@2] channel count should be 8, we got 2 aborting
- [ 100.141165@2] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
- [ 100.141192@2] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
- [ 100.192436@2] codec:vdec_create instance ffffff8007a08000, total 1
- [ 100.192470@2] codec:vdec_release instance ffffff8007a08000, total 0
- [ 100.192958@2] fb: osd_set_free_scale_enable_hw
- [ 100.202069@0] fb: osd_set_free_scale_enable_hw
- [ 100.218847@0] fb: osd_open index=0,open_count=1
- [ 100.218873@0] fb: osd_release now.index=0,open_count=1
- [ 100.226496@0] kodi.bin[3188]: unhandled level 3 translation fault (11) at 0x00000000, esr 0x83000007
- [ 100.226511@0] pgd = ffffffc05f917000
- [ 100.226516@0] [00000000] *pgd=000000005f847003, *pmd=0000000073b73003, *pte=0000000000000000
- [ 100.226524@0]
- [ 100.226533@0] CPU: 0 PID: 3188 Comm: kodi.bin Tainted: G O 3.14.29 #1
- [ 100.226539@0] task: ffffffc05fc00a80 ti: ffffffc0606dc000 task.ti: ffffffc0606dc000
- [ 100.226550@0] PC is at 0x0
- [ 100.226554@0] LR is at 0x3e3255
- [ 100.226558@0] pc : [<0000000000000000>] lr : [<00000000003e3255>] pstate: 00000010
- [ 100.226562@0] sp : 00000000ffa83750
- [ 100.226566@0] x12: 0000000000000001
- [ 100.226569@0] x11: 0000000000000000 x10: 00000000f75c8fb4
- [ 100.226574@0] x9 : 0000000000000000 x8 : 0000000001798b20
- [ 100.226579@0] x7 : 0000000000000001 x6 : 00000000017ad7fc
- [ 100.226584@0] x5 : 0000000001814cac x4 : 0000000001814cac
- [ 100.226589@0] x3 : 0000000000000000 x2 : 00000000017ad8c8
- [ 100.226594@0] x1 : 0000000001814cac x0 : 0000000001814c70
- [ 100.226598@0]
- [ 100.372106@0] aml_snd_m8_card aml_m8_snd.49: I2S playback disable
- [ 100.372128@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback disable
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement