Astralix

U9 Kernel on OdysLoox Bootlog

Jan 14th, 2012
342
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. In
  2. cap=512MB
  3. OUT
  4. BUILD[0006]=====719304
  5. GetRemapTbl flag = 0
  6. OK!
  7. Boot ver: 2011-04-22#1.61
  8. Unknow param: FIRMWARE_VER:0.2.3!
  9. Unknow param: MACHINE_MODEL:Odys-Loox!
  10. Unknow param: MACHINE_ID:007!
  11. Unknow param: MANUFACTURER:RK29SDK!
  12. ORG CMDLINE: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x500000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00002000@0x00008000(boot),0x00004000@0x0000A000(recovery),0x00080000@0x0000E000(system),0x00082000@0x0008E000(backup),0x0003a000@0x00110000(cache),0x00100000@0x0014a000(userdata),0x00002000@0x0024a000(kpanic),-@0x0024c000(user)
  13. get command in misc
  14. no command
  15. Normal boot
  16. Loading boot ...
  17. Check image...
  18. Check OK!
  19. Load ok!
  20. Loading kernel ...
  21. Check image...
  22. Check OK!
  23. Load ok!
  24. END ===== 730227
  25. CMDLINE: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x040000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00002000@0x00008000(boot),0x00004000@0x0000A000(recovery),0x00080000@0x0000E000(system),0x00082000@0x0008E000(backup),0x0003a000@0x00110000(cache),0x00100000@0x0014a000(userdata),0x00002000@0x0024a000(kpanic),-@0x0024c000(user) bootver=2011-04-22#1.61 firmware_ver=
  26. Starting kernel...@0x60408000
  27.  
  28. [ 0.000000] Initializing cgroup subsys cpu
  29. [ 0.000000] Linux version 3.0.8+ (fjp@fae) (gcc version 4.4.0 (GCC) ) #179 PREEMPT Tue Jan 10 14:33:13 CST 2012
  30. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  31. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  32. [ 0.000000] Machine: RK29board
  33. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  34. [ 0.000000] bootconsole [earlycon0] enabled
  35. [ 0.000000] CPU SRAM: copied sram code from c0aea000 to fef00000 - fef01c88
  36. [ 0.000000] CPU SRAM: copied sram data from c0aebc88 to fef03000 - fef032d8
  37. [ 0.000000] Clocking rate (apll/dpll/cpll/gpll/core/aclk_cpu/hclk_cpu/pclk_cpu/aclk_periph/hclk_periph/pclk_periph): 300/402/297/288/300/150/75/37/144/144/36 MHz (20110909)
  38. [ 0.000000] DDR DEBUG: version 2.02 20111109
  39. [ 0.000000] DDR DEBUG: DDR3 Device
  40. [ 0.000000] DDR DEBUG: 1 CS, ROW=14, Bank=8, COL=10, Total Capability=512MB
  41. [ 0.000000] DDR DEBUG: init success!!! freq=426MHz
  42. [ 0.000000] DDR DEBUG: CSR:0x0, RSLR0:0x249, RSLR1:0x0, RDGR0:0x55, RDGR1:0xff
  43. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190208
  44. [ 0.000000] Kernel command line: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x040000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00002000@0x00008000(boot),0x00004000@0x0000A000(recovery),0x00080000@0x0000E000(system),0x00082000@0x0008E000(backup),0x0003a000@0x00110000(cache),0x00100000@0x0014a000(userdata),0x00002000@0x0024a000(kpanic),-@0x0024c000(user) bootver=2011-04-22#1.61 firmware_ver=
  45. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  46. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  47. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  48. [ 0.000000] Memory: 239MB 512MB = 751MB total
  49. [ 0.000000] Memory: 744628k/744628k available, 24396k reserved, 524288K highmem
  50. [ 0.000000] Virtual kernel memory layout:
  51. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  52. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  53. [ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
  54. [ 0.000000] vmalloc : 0xcf000000 - 0xfe800000 ( 760 MB)
  55. [ 0.000000] lowmem : 0xc0000000 - 0xcef00000 ( 239 MB)
  56. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  57. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  58. [ 0.000000] .init : 0xc0408000 - 0xc04ed000 ( 916 kB)
  59. [ 0.000000] .text : 0xc04ed000 - 0xc0a88884 (5743 kB)
  60. [ 0.000000] .data : 0xc0a8a000 - 0xc0ae9200 ( 381 kB)
  61. [ 0.000000] .bss : 0xc0aec024 - 0xc1572030 (10777 kB)
  62. [ 0.000000] Preemptible hierarchical RCU implementation.
  63. [ 0.000000] NR_IRQS:388
  64. [ 0.000000] rk29_gpio_init: 224 gpio irqs in 7 banks
  65. [ 0.000000] sched_clock: 32 bits at 36MHz, resolution 27ns, wraps every 119304ms
  66. [ 0.000000] Console: colour dummy device 80x30
  67. [ 0.005487] Calibrating delay loop (skipped) preset value.. 299.83 BogoMIPS (lpj=1499184)
  68. [ 0.014623] pid_max: default: 32768 minimum: 301
  69. [ 0.020113] Mount-cache hash table entries: 512
  70. [ 0.025850] Initializing cgroup subsys debug
  71. [ 0.030653] Initializing cgroup subsys cpuacct
  72. [ 0.035706] Initializing cgroup subsys freezer
  73. [ 0.040741] CPU: Testing write buffer coherency: ok
  74. [ 0.047273] devtmpfs: initialized
  75. [ 0.060684] print_constraints: dummy:
  76. [ 0.065291] NET: Registered protocol family 16
  77. [ 0.070366] last_log: 0xce880000 0xc0aed328
  78. [ 0.184456] rk29sdk_wifi_bt_gpio_control_init: init finished
  79. [ 0.228857] bio: create slab <bio-0> at 0
  80. [ 0.234243] print_constraints: PWM2: 950 <--> 1400 mV at 1200 mV
  81. [ 0.241184] pwm_regulator: driver initialized
  82. [ 0.247076] SCSI subsystem initialized
  83. [ 0.251787] usbcore: registered new interface driver usbfs
  84. [ 0.258087] usbcore: registered new interface driver hub
  85. [ 0.264264] usbcore: registered new device driver usb
  86. [ 0.270904] rk29_i2c rk29_i2c.0: i2c-0: RK29 I2C adapter
  87. [ 0.277180] rk29_i2c rk29_i2c.1: i2c-1: RK29 I2C adapter
  88. [ 0.283584] rk29_i2c rk29_i2c.2: i2c-2: RK29 I2C adapter
  89. [ 0.289795] rk29_i2c rk29_i2c.3: i2c-3: RK29 I2C adapter
  90. [ 0.296083] rk29-adc rk29-adc: rk29 adc: driver initialized
  91. [ 0.302535] rk29_adc_battery_probe--1073:
  92. [ 0.307185] rk29_adc_battery_lowpower_check--977:
  93. [ 0.628328] low battery: powerdown
  94. [ 0.888230] POWER_SUPPLY_TYPE_MAINS
  95. [ 0.892547] POWER_SUPPLY_TYPE_MAINS
  96. [ 0.896532] rk29_adc_battery: driver initialized
  97. [ 0.902283] Advanced Linux Sound Architecture Driver Version 1.0.24.
  98. [ 0.910331] Switching to clocksource timer3
  99. [ 0.921800] Switched to NOHz mode on CPU #0
  100. [ 1.012463] rk29fb_probe ok
  101. [ 1.030742] NET: Registered protocol family 2
  102. [ 1.035992] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
  103. [ 1.044434] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  104. [ 1.053882] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
  105. [ 1.062070] TCP: Hash tables configured (established 32768 bind 32768)
  106. [ 1.069376] TCP reno registered
  107. [ 1.072937] UDP hash table entries: 256 (order: 0, 4096 bytes)
  108. [ 1.079511] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  109. [ 1.087212] NET: Registered protocol family 1
  110. [ 1.092524] RK29 Backlight Driver Initialized.
  111. [ 1.098002] Unpacking initramfs...
  112. [ 1.143412] Freeing initrd memory: 256K
  113. [ 1.147945] PMU: registered new PMU device of type 0
  114. [ 1.153953] Loaded driver for PL330 DMAC-0 rk29-pl330
  115. [ 1.159672] DBUFF-32x8bytes Num_Chans-6 Num_Peri-8 Num_Events-3
  116. [ 1.166673] Loaded driver for PL330 DMAC-1 rk29-pl330
  117. [ 1.172332] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-4
  118. [ 1.193506] vpu_mem: 63 initialized
  119. [ 1.197608] vpu: power on
  120. [ 1.221108] VPU_SERVICE: HW ID = 0x67311148
  121. [ 1.225800] VPU_SERVICE: Compatible HW found at 0x10104200
  122. [ 1.231916] VPU_SERVICE: HW ID = 0x82701110
  123. [ 1.236655] VPU_SERVICE: Compatible HW found at 0x10104000
  124. [ 1.243028] vpu: power off...
  125. [ 1.266707] done
  126. [ 1.268809] VPU_SERVICE: init success
  127. [ 1.272952] ret=0x0
  128. [ 1.291016] highmem bounce pool size: 64 pages
  129. [ 1.296247] ashmem: initialized
RAW Paste Data