LulzRose

How to make Weapons Grade VX

Sep 19th, 2018
350
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.37 KB | None | 0 0
  1. S-(2diisopropylaminoethyl)0- ethylmethylphonothiolate. SOURCE - Chemical synthesis. FORM - Heavy, oily liquid like motor oil; Odorless. Clear to straw in color. BP 300" C. HANDLING - Avoid inhalation, ingestion, or skin contact. Handle only in a sealed glove box with decontamination apparatus. A good military mask and decontamination suit should be available. DOSAGE - Skin - 10mg. Orally -2mg. Inhalation 10mg.min/cubic meter. VX has a very low vapor pressure and therefore is very slow to evaporate. The primary danger is from skin contact or ingestion, though it is very toxic as an aerosol. SYMPTOMS - Dim vision, pinpoint pupils (may not occur from skin absorption), runny nose, tightness of chest, sweating, muscular twitching, nausea, vomiting, weakness and coma. Vapor inhalation or absorption of vapor through the eyes causes quickest onset of symptoms. Skin absorption generally takes about 10 minutes. DETAILS - VX, like most other nerve gases, originated from insecticide research, which in this case, was done in Britain in the late 1950's. Unlike Sarin, VX is a persistent agent - meaning it can stay on target and active for weeks at a time (assuming proper weather conditions). This property also gives VX a much lower skin dosage than Sarin, as it will not evaporate before being absorbed. Mixing 50/50 VX and DMSO gives a liquid which absorbs through the skin in 2 to 3 minutes. DMSO both accelerates absorption and increases toxicity in organophosphorus compounds such as nerve gas. In the 1950's the Soviets experimented with a 50/50 mixture of DMSO and Soman (their standard nerve agont). They found the dose to be l/6th as much as the pure agent.
  2.  
  3.  
  4. Preparation of VX 1) 1000ml of anhydrous ethyl ether and 234 grams of re-distilled dichloromethylphosphine are added to a 3 liter reaction flask which has been previously flushed with dry nitrogen. 2) A mixture of 152.4ml (193.2g) of absolute ethanol and 583.1ml (627g) n, n-diethylaniline are placed in a dropping funnel and added dropwise with stirring to the mixture from step 1. During this addition maintain the reaction temperature at 20° to 30° C by use of an ice bath, and flush dry nitrogen through the system. The exit gas line from the condenser is connected to a mercury bubbler. 3) After the alcohol addition is completed, continue stirring for an additional 3 hours. 4) Remove the flask from the reaction apparatus and flush with nitrogen. 5) Pour the contents of the flask into a Buchner funnel and rinse the flask with 300 ml of anhydrous ethyl ether. Pour this into the funnel. Filter with vacuum from an aspirator equipped with a dry ice/acetone trap. Wash the filter cake with two 300ml portions of anhydrous ethyl ether. The filter cake is X, n-diethyaniline hydrochloride and is not used in this process. It may be saved and converted back to its original form for reuse. 6) The liquid reaction product is transferred to a 2 liter flask which has been previously flushed with dry nitrogen. Connect the flask to a 10 inch packed column with a stripping head and distill off the ethyl ether at a temperature of about 60° C. The exit gas linn is sealed with a mercury bubbler to preclude the entrance of atmospheric oxygen into the system. 7) The remaining liquid is transferred to a 500ml flunk and distilled in vacuum at 47°C/50mm. Yield is about 223.2 grams of di ethyl methyl phosphonite. 8>The 223.2grams of diethylmethylphosphonite is placed in a 1 literflask fitted with a thermometer and a condenser, and mixed with 119.6 grams of 2diisopropylaminoethanol. 9) Flush the flask with dry nitrogen and slowly heat from 23° to 110°c over the course of 55 minutes. Ethanol will begin distilling at 75° to 78.5° C. Continue a further 65 minutes to remove all ethanol. The temperature will reach 150*C at completion. Yield should be about 37.4 grams of ethanol. 10) Discontinue heating and flush dry nitrogen t hrough the system while it cools to 50*C. l1Fractionally distill under vacuum. The desired product, ethyl 2-diisopropylaminoethyl methylphosphonite, will distill at 54°C/100. Yield is about 136.8g. (Note - One of the original feed-stocks, diethylmethylphosphonite distills at 48°C/50mm. This fraction should be saved for reuse. Almost half (45%) may be recovered in this way. 12) Equip a 3 neck 1 liter flask with an agitator, a thermocouple well, an addition tube for the sulfur with a vibrating feed, and an addition line for nitrogen. The flask is immersed in a bath of ethylene glycol contained in a battery jar. Cooling is controlled by lidding dry ice to the bath and heating, by a submerged electric heat coil. 13) Pour the 136.8 grams of ethyl 2-diisopropylaminoethylmethylphosphonite into the flask and starrt a nitrogen purge to maintain an inert atmosphere. 14) Use the vibrating feeder to slowly add 18.5 grams of ground rhombic sulfur. Allow 60 minutes to feed the sulfur. The reaction is kept at about 30*C with the dry ice/glycol bath. 15) 10 minutes after the last of the sulfur has been added, heat the flask as quickly as possible to 120*C, using the heating coil. and maintain at this temperature for 90 minutes. You now have about 155 grams of S-(2diisopropylaminoethyl)-0-ethyl methylphosphonite (VX) of 97.6% purity. Use it wisely. NOTE - Do not attempt this process unless you are well versed and experienced in conducting reactions and distillations in inert atmospheres, and aware of the natures of the chemicals used. If you do not, you are courting disaster.
Advertisement
Add Comment
Please, Sign In to add comment