API tools faq
paste
Advertisement
niwo

SMART #3

niwo
Apr 25th, 2020
53
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.47 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital RE Serial ATA
  6. Device Model: WDC WD2500YS-01SHB1
  7. Serial Number: WD-WCANY4199326
  8. LU WWN Device Id: 5 0014ee 1ab7accff
  9. Firmware Version: 20.06C06
  10. User Capacity: 251.000.193.024 bytes [251 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
  14. Local Time is: Sun Apr 26 05:54:28 2020 CEST
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: FAILED!
  20. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  21. See vendor-specific Attribute list for failed Attributes.
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x85) Offline data collection activity
  25. was aborted by an interrupting command from host.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 73) The previous self-test completed having
  28. a test element that failed and the test
  29. element that failed is not known.
  30. Total time to complete Offline
  31. data collection: ( 8400) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 98) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 6) minutes.
  52. SCT capabilities: (0x103f) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 4
  61. 3 Spin_Up_Time 0x0003 186 184 021 Pre-fail Always - 5675
  62. 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1233
  63. 5 Reallocated_Sector_Ct 0x0033 104 104 140 Pre-fail Always FAILING_NOW 764
  64. 7 Seek_Error_Rate 0x000f 193 192 051 Pre-fail Always - 252
  65. 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 19085
  66. 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  67. 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1233
  69. 194 Temperature_Celsius 0x0022 123 100 000 Old_age Always - 27
  70. 196 Reallocated_Event_Count 0x0032 110 110 000 Old_age Always - 90
  71. 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
  72. 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1
  74. 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 6 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 6 occurred at disk power-on lifetime: 19081 hours (795 days + 1 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 04 61 f0 70 0b 6b e0 Device Fault; Error: ABRT 240 sectors at LBA = 0x006b0b70 = 7015280
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. 35 00 f0 70 0b 6b 19 00 03:41:57.980 WRITE DMA EXT
  104. e5 00 00 00 00 00 00 00 03:41:50.567 CHECK POWER MODE
  105. e5 00 00 00 00 00 00 00 03:41:42.397 CHECK POWER MODE
  106. e5 00 00 00 00 00 00 00 03:41:34.226 CHECK POWER MODE
  107. 35 00 f0 70 0b 6b 19 00 03:41:26.311 WRITE DMA EXT
  108.  
  109. Error 5 occurred at disk power-on lifetime: 19081 hours (795 days + 1 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 04 61 f0 70 0b 6b e0 Device Fault; Error: ABRT 240 sectors at LBA = 0x006b0b70 = 7015280
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. 35 00 f0 70 0b 6b 19 00 03:41:26.311 WRITE DMA EXT
  121. 35 00 f0 80 0a 6b 19 00 03:41:14.536 WRITE DMA EXT
  122. 35 00 f0 90 09 6b 19 00 03:41:14.532 WRITE DMA EXT
  123. e5 00 00 00 00 00 00 00 03:41:14.532 CHECK POWER MODE
  124. 35 00 f0 a0 08 6b 19 00 03:41:02.693 WRITE DMA EXT
  125.  
  126. Error 4 occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 40 51 80 60 f0 66 e0 Error: UNC 128 sectors at LBA = 0x0066f060 = 6746208
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. 25 00 80 60 f0 66 00 00 00:14:00.230 READ DMA EXT
  138. 25 00 80 e0 ef 66 00 00 00:14:00.227 READ DMA EXT
  139. 25 00 80 60 ef 66 00 00 00:14:00.224 READ DMA EXT
  140. 25 00 80 e0 ee 66 00 00 00:14:00.222 READ DMA EXT
  141. 25 00 80 60 ee 66 00 00 00:14:00.219 READ DMA EXT
  142.  
  143. Error 3 occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 40 51 80 60 f0 66 e0 Error: UNC 128 sectors at LBA = 0x0066f060 = 6746208
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. 25 00 80 60 f0 66 00 00 00:13:44.396 READ DMA EXT
  155. e5 00 00 00 00 00 00 00 00:13:42.549 CHECK POWER MODE
  156. e5 00 00 00 00 00 00 00 00:13:34.379 CHECK POWER MODE
  157. e5 00 00 00 00 00 00 00 00:13:26.208 CHECK POWER MODE
  158. e5 00 00 00 00 00 00 00 00:13:18.038 CHECK POWER MODE
  159.  
  160. Error 2 occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours)
  161. When the command that caused the error occurred, the device was active or idle.
  162.  
  163. After command completion occurred, registers were:
  164. ER ST SC SN CL CH DH
  165. -- -- -- -- -- -- --
  166. 40 51 80 60 f0 66 e0 Error: UNC 128 sectors at LBA = 0x0066f060 = 6746208
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  170. -- -- -- -- -- -- -- -- ---------------- --------------------
  171. 25 00 80 60 f0 66 00 00 00:09:27.598 READ DMA EXT
  172. 25 00 80 e0 ef 66 00 00 00:09:27.596 READ DMA EXT
  173. 25 00 80 60 ef 66 00 00 00:09:27.593 READ DMA EXT
  174. 25 00 80 e0 ee 66 00 00 00:09:27.590 READ DMA EXT
  175. 25 00 80 60 ee 66 00 00 00:09:27.588 READ DMA EXT
  176.  
  177. SMART Self-test log structure revision number 1
  178. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  179. # 1 Short offline Completed: unknown failure 90% 19085 -
  180. # 2 Short offline Completed: read failure 90% 19078 6746210
  181. # 3 Extended offline Completed: read failure 90% 19078 6746210
  182.  
  183. SMART Selective self-test log data structure revision number 1
  184. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  185. 1 0 0 Not_testing
  186. 2 0 0 Not_testing
  187. 3 0 0 Not_testing
  188. 4 0 0 Not_testing
  189. 5 0 0 Not_testing
  190. Selective self-test flags (0x0):
  191. After scanning selected spans, do NOT read-scan remainder of disk.
  192. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!