▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒DDR Version 1.22 20190506
In
channel 0
CS = 0
MR0=0x98
MR4=0x1
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x1
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x1
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x1
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x1
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x1
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x1
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x1
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 0, cs 1, advanced training done
channel 1, cs 0, advanced training done
channel 1, cs 1, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 254
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29600MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 68463
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT part:  0, name:          loader1, start:0x40, size:0x1f40
GPT part:  1, name:          loader2, start:0x4000, size:0x2000
GPT part:  2, name:            trust, start:0x6000, size:0x2000
GPT part:  3, name:             boot, start:0x8000, size:0x100000
GPT part:  4, name:           rootfs, start:0x108000, size:0x38c7fdf
recovery gpt success!
no find partition:uboot.
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x9ca20
RunBL31 0x10000
NOTICE:  BL31: v1.3(debug):51f2096
NOTICE:  BL31: Built : 16:24:31, May  6 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1181): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2019.07-1 (Jun 11 2019 - 13:44:17 +0000) Manjaro ARM

Model: Radxa ROCK Pi 4
DRAM:  3.9 GiB
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment

In:    serial@ff1a0000
Out:   serial@ff1a0000
Err:   serial@ff1a0000
Model: Radxa ROCK Pi 4
Net:
Error: ethernet@fe300000 address not set.
eth-1: ethernet@fe300000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
964 bytes read in 6 ms (156.3 KiB/s)
## Executing script at 00500000
26468864 bytes read in 2732 ms (9.2 MiB/s)
70037 bytes read in 28 ms (2.4 MiB/s)
7340745 bytes read in 764 ms (9.2 MiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Device Tree to 00000000f5f16000, end 00000000f5f2afff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.1.11-1-MANJARO-ARM (root@aarch64) (gcc version 8.3.0 (GCC)) #1 SMP Tue Jun 18 13:46:04 UTC 2019
[    0.000000] Machine model: Radxa ROCK Pi 4
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0x00000000f1c00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] random: get_random_bytes called from start_kernel+0xa4/0x4b0 with crng_init=0
[    0.000000] percpu: Embedded 24 pages/cpu s60696 r8192 d29416 u98304
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Kernel command line: console=ttyS2,1500000 root=PARTUUID=ee22ec15-01 rw rootwait initrd=0x04000000,20M ramdisk_size=10M
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3867856K/4061184K available (14780K kernel code, 2616K rwdata, 6560K rodata, 1856K init, 823K bss, 127792K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] ftrace: allocating 50755 entries in 199 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f6e00000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000f6da0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f6db0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.003657] Console: colour dummy device 80x25
[    0.003726] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.003747] pid_max: default: 32768 minimum: 301
[    0.004107] LSM: Security Framework initializing
[    0.004138] Yama: becoming mindful.
[    0.004304] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.004347] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005299] *** VALIDATE proc ***
[    0.005732] *** VALIDATE cgroup1 ***
[    0.005750] *** VALIDATE cgroup2 ***
[    0.007444] ASID allocator initialised with 32768 entries
[    0.007623] rcu: Hierarchical SRCU implementation.
[    0.011384] Platform MSI: interrupt-controller@fee20000 domain created
[    0.011995] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.016941] EFI services will not be available.
[    0.017791] smp: Bringing up secondary CPUs ...
[    0.018759] Detected VIPT I-cache on CPU1
[    0.018813] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.018832] GICv3: CPU1: using allocated LPI pending table @0x00000000f6dc0000
[    0.018892] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.020049] Detected VIPT I-cache on CPU2
[    0.020092] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.020109] GICv3: CPU2: using allocated LPI pending table @0x00000000f6dd0000
[    0.020153] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.021204] Detected VIPT I-cache on CPU3
[    0.021246] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.021262] GICv3: CPU3: using allocated LPI pending table @0x00000000f6de0000
[    0.021304] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.024928] CPU features: detected: EL2 vector hardening
[    0.025401] Detected PIPT I-cache on CPU4
[    0.026666] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.027097] GICv3: CPU4: using allocated LPI pending table @0x00000000f6df0000
[    0.028324] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.036174] Detected PIPT I-cache on CPU5
[    0.037345] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.037755] GICv3: CPU5: using allocated LPI pending table @0x00000000f6e80000
[    0.038939] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.043135] smp: Brought up 1 node, 6 CPUs
[    0.043267] SMP: Total of 6 processors activated.
[    0.043297] CPU features: detected: 32-bit EL0 Support
[    0.043327] CPU features: detected: CRC32 instructions
[    0.053524] CPU: All CPU(s) started at EL2
[    0.054196] alternatives: patching kernel code
[    0.071902] devtmpfs: initialized
[    0.103744] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103897] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.112128] pinctrl core: initialized pinctrl subsystem
[    0.114643] DMI not present or invalid.
[    0.115807] NET: Registered protocol family 16
[    0.123183] cpuidle: using governor ladder
[    0.123255] cpuidle: using governor menu
[    0.124032] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[    0.124080] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.137626] DMA: preallocated 256 KiB pool for atomic allocations
[    0.139281] Serial: AMBA PL011 UART driver
[    0.230551] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.230676] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.230691] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.230706] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.232718] cryptd: max_cpu_qlen set to 1000
[    0.236220] ACPI: Interpreter disabled.
[    0.237628] vcc5v0_sys: supplied by vcc12v_dcin
[    0.238407] vcc3v3_pcie: supplied by vcc5v0_sys
[    0.238941] vcc3v3_sys: supplied by vcc5v0_sys
[    0.239687] vcc5v0_host: supplied by vcc5v0_sys
[    0.240333] vcc5v0_typec: supplied by vcc5v0_sys
[    0.248511] vgaarb: loaded
[    0.252455] SCSI subsystem initialized
[    0.254144] usbcore: registered new interface driver usbfs
[    0.254252] usbcore: registered new interface driver hub
[    0.254552] usbcore: registered new device driver usb
[    0.255895] media: Linux media interface: v0.10
[    0.255968] videodev: Linux video capture interface: v2.00
[    0.256091] pps_core: LinuxPPS API ver. 1 registered
[    0.256102] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@l
               [   26.166786] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   26.167409] ehci-pci: EHCI PCI platform driver
[   26.167888] ehci-platform: EHCI generic platform driver
[   26.171194] ehci-platform fe380000.usb: EHCI Host Controller
[   26.173408] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[   26.175894] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
[   26.205136] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[   26.206319] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[   26.207056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.207699] usb usb1: Product: EHCI Host Controller
[   26.208139] usb usb1: Manufacturer: Linux 5.1.11-1-MANJARO-ARM ehci_hcd
[   26.208730] usb usb1: SerialNumber: fe380000.usb
[   26.212764] hub 1-0:1.0: USB hub found
[   26.213162] hub 1-0:1.0: 1 port detected
[   26.216843] ehci-platform fe3c0000.usb: EHCI Host Controller
[   26.219984] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[   26.224056] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
[   26.245163] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[   26.246188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[   26.246926] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.247568] usb usb2: Product: EHCI Host Controller
[   26.248008] usb usb2: Manufacturer: Linux 5.1.11-1-MANJARO-ARM ehci_hcd
[   26.248596] usb usb2: SerialNumber: fe3c0000.usb
[   26.252275] hub 2-0:1.0: USB hub found
[   26.252670] hub 2-0:1.0: 1 port detected
[   26.254212] ehci-orion: EHCI orion driver
[   26.255287] tegra-ehci: Tegra EHCI driver
[   26.255981] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   26.256702] ohci-pci: OHCI PCI platform driver
[   26.257255] ohci-platform: OHCI generic platform driver
[   26.258269] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[   26.261129] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[   26.262915] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
[   26.329369] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
[   26.330107] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.330750] usb usb3: Product: Generic Platform OHCI controller
[   26.331280] usb usb3: Manufacturer: Linux 5.1.11-1-MANJARO-ARM ohci_hcd
[   26.331870] usb usb3: SerialNumber: fe3a0000.usb
[   26.336844] hub 3-0:1.0: USB hub found
[   26.337240] hub 3-0:1.0: 1 port detected
[   26.338612] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[   26.340815] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[   26.342153] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
[   26.409386] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
[   26.410124] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.410767] usb usb4: Product: Generic Platform OHCI controller
[   26.411297] usb usb4: Manufacturer: Linux 5.1.11-1-MANJARO-ARM ohci_hcd
[   26.411887] usb usb4: SerialNumber: fe3e0000.usb
[   26.416668] hub 4-0:1.0: USB hub found
[   26.417103] hub 4-0:1.0: 1 port detected
[   26.418573] uhci_hcd: USB Universal Host Controller Interface driver
[   26.420900] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   26.422975] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[   26.426132] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[   26.427012] xhci-hcd xhci-hcd.0.auto: irq 217, io mem 0xfe800000
[   26.428413] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[   26.429152] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.429796] usb usb5: Product: xHCI Host Controller
[   26.430236] usb usb5: Manufacturer: Linux 5.1.11-1-MANJARO-ARM xhci-hcd
[   26.430825] usb usb5: SerialNumber: xhci-hcd.0.auto
[   26.434897] hub 5-0:1.0: USB hub found
[   26.435421] hub 5-0:1.0: 1 port detected
[   26.436577] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   26.438655] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[   26.439360] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[   26.440065] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   26.441011] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[   26.441747] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.442390] usb usb6: Product: xHCI Host Controller
[   26.442830] usb usb6: Manufacturer: Linux 5.1.11-1-MANJARO-ARM xhci-hcd
[   26.443419] usb usb6: SerialNumber: xhci-hcd.0.auto
[   26.447744] hub 6-0:1.0: USB hub found
[   26.448150] hub 6-0:1.0: 1 port detected
[   26.449475] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   26.451422] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[   26.454044] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[   26.455572] xhci-hcd xhci-hcd.1.auto: irq 218, io mem 0xfe900000
[   26.456906] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[   26.457643] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.458286] usb usb7: Product: xHCI Host Controller
[   26.458726] usb usb7: Manufacturer: Linux 5.1.11-1-MANJARO-ARM xhci-hcd
[   26.459317] usb usb7: SerialNumber: xhci-hcd.1.auto
[   26.462773] hub 7-0:1.0: USB hub found
[   26.463170] hub 7-0:1.0: 1 port detected
[   26.464156] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   26.467052] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[   26.467753] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[   26.468463] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[   26.469397] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[   26.470133] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.470776] usb usb8: Product: xHCI Host Controller
[   26.471216] usb usb8: Manufacturer: Linux 5.1.11-1-MANJARO-ARM xhci-hcd
[   26.471806] usb usb8: SerialNumber: xhci-hcd.1.auto
[   26.477367] hub 8-0:1.0: USB hub found
[   26.477768] hub 8-0:1.0: 1 port detected
[   26.479955] usbcore: registered new interface driver uas
[   26.480835] usbcore: registered new interface driver usb-storage
[   26.481441] usbcore: registered new interface driver ums-alauda
[   26.482046] usbcore: registered new interface driver ums-cypress
[   26.482652] usbcore: registered new interface driver ums-datafab
[   26.483249] usbcore: registered new interface driver ums_eneub6250
[   26.483866] usbcore: registered new interface driver ums-freecom
[   26.484467] usbcore: registered new interface driver ums-isd200
[   26.485521] usbcore: registered new interface driver ums-jumpshot
[   26.486129] usbcore: registered new interface driver ums-karma
[   26.486726] usbcore: registered new interface driver ums-onetouch
[   26.487356] usbcore: registered new interface driver ums-realtek
[   26.487959] usbcore: registered new interface driver ums-sddr09
[   26.488552] usbcore: registered new interface driver ums-sddr55
[   26.489145] usbcore: registered new interface driver ums-usbat
[   26.489930] usbcore: registered new interface driver usbserial_generic
[   26.490554] usbserial: USB Serial support registered for generic
[   26.497724] mousedev: PS/2 mouse device common for all mice
[   26.507740] rk808 0-001b: chip id: 0x0
[   26.517198] rk808-regulator rk808-regulator: there is no dvs0 gpio
[   26.517808] rk808-regulator rk808-regulator: there is no dvs1 gpio
[   26.518479] DCDC_REG1: supplied by vcc5v0_sys
[   26.520465] DCDC_REG2: supplied by vcc5v0_sys
[   26.521657] DCDC_REG3: supplied by vcc5v0_sys
[   26.522506] DCDC_REG4: supplied by vcc5v0_sys
[   26.523655] LDO_REG1: supplied by vcc5v0_sys
[   26.525821] LDO_REG2: supplied by vcc5v0_sys
[   26.527603] LDO_REG3: supplied by vcc5v0_sys
[   26.529391] LDO_REG4: supplied by vcc5v0_sys
[   26.531151] LDO_REG5: supplied by vcc5v0_sys
[   26.531757] vcca3v0_codec: Bringing 1800000uV into 3000000-3000000uV
[   26.533606] LDO_REG6: supplied by vcc5v0_sys
[   26.535932] LDO_REG7: supplied by vcc5v0_sys
[   26.536541] vcc0v9_hdmi: Bringing 800000uV into 900000-900000uV
[   26.538369] LDO_REG8: supplied by vcc5v0_sys
[   26.540193] SWITCH_REG1: supplied by vcc3v3_sys
[   26.541137] SWITCH_REG2: supplied by vcc3v3_sys
[   26.543905] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[   26.544545] fan53555-reg: supplied by vcc5v0_sys
[   26.548006] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[   26.548690] fan53555-reg: supplied by vcc5v0_sys
[   26.560917] device-mapper: uevent: version 1.0.3
[   26.563948] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[   26.570873] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 400000 KHz
[   26.572219] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 408000 KHz
[   26.573317] random: fast init done
[   26.574993] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[   26.577946] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[   26.581410] sdhci: Secure Digital Host Controller Interface driver
[   26.581950] sdhci: Copyright(c) Pierre Ossman
[   26.582865] Synopsys Designware Multimedia Card Interface Driver
[   26.584407] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[   26.585380] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[   26.585978] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[   26.586519] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[   26.587473] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[   26.600757] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   26.615386] sdhci-pltfm: SDHCI platform and OF driver helper
[   26.617299] mmc1: CQHCI version 5.10
[   26.643647] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[   26.645690] ledtrig-cpu: registered to indicate activity on CPUs
[   26.646833] hidraw: raw HID events driver (C) Jiri Kosina
[   26.647442] usbcore: registered new interface driver usbhid
[   26.647935] usbhid: USB HID core driver
[   26.652360] drop_monitor: Initializing network drop monitor service
[   26.653087] Initializing XFRM netlink socket
[   26.653931] NET: Registered protocol family 10
[   26.664643] Segment Routing with IPv6
[   26.665059] mip6: Mobile IPv6
[   26.665325] NET: Registered protocol family 17
[   26.666328] Key type dns_resolver registered
[   26.667927] registered taskstats version 1
[   26.668297] Loading compiled-in X.509 certificates
[   26.668829] zswap: loaded using pool lzo/zbud
[   26.669372] Key type big_key registered
[   26.683684] Key type encrypted registered
[   26.700685] hctosys: unable to open rtc device (rtc0)
[   26.702219] ALSA device list:
[   26.702488]   No soundcards found.
[   26.703060] ttyS2 - failed to request DMA
[   26.705465] mmc1: mmc_select_hs400es failed, error -110
[   26.705938] mmc1: error -110 whilst initialising MMC card
[   26.706459] Freeing unused kernel memory: 1856K
[   26.755338] Run /init as init process
:: running early hook [udev]
[   26.801410] mmc1: mmc_select_hs400es failed, error -110
[   26.801889] mmc1: error -110 whilst initialising MMC card
Starting version 242.29-1-arch
:: running hook [udev]
:: Triggering uevents...
[   26.909126] mmc1: mmc_select_hs400es failed, error -110
[   26.909601] mmc1: error -110 whilst initialising MMC card
[   27.015135] usb 3-1: new full-speed USB device number 2 using ohci-platform
[   27.058294] mmc1: mmc_select_hs400es failed, error -110
[   27.058771] mmc1: error -110 whilst initialising MMC card
[   27.287244] usb 3-1: New USB device found, idVendor=0c45, idProduct=8101, bcdDevice= 0.01
[   27.287967] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   27.288599] usb 3-1: Product: USB Device
[   27.288943] usb 3-1: Manufacturer: USB
[   27.298801] input: USB USB Device Consumer Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:0C45:8101.0001/input/input0
[   27.365900] input: USB USB Device System Control as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:0C45:8101.0001/input/input1
[   27.367608] input: USB USB Device Keyboard as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:0C45:8101.0001/input/input2
[   27.369870] hid-generic 0003:0C45:8101.0001: input,hidraw0: USB HID v1.01 Keyboard [USB USB Device] on usb-fe3a0000.usb-1/input0
[   27.374997] input: USB USB Device as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:0C45:8101.0002/input/input3
[   27.377469] hid-generic 0003:0C45:8101.0002: input,hidraw1: USB HID v1.01 Mouse [USB USB Device] on usb-fe3a0000.usb-1/input1
[   27.382382] hid-generic 0003:0C45:8101.0003: hiddev96,hidraw2: USB HID v1.10 Device [USB USB Device] on usb-fe3a0000.usb-1/input2
[   27.388145] input: USB USB Device as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.3/0003:0C45:8101.0004/input/input4
[   27.390011] hid-generic 0003:0C45:8101.0004: input,hidraw3: USB HID v1.01 Gamepad [USB USB Device] on usb-fe3a0000.usb-1/input3
Waiting 10 seconds for device /dev/disk/by-partuuid/ee22ec15-01 ...
[   33.195333] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
ERROR: device 'PARTUUID=ee22ec15-01' not found. Skipping fsck.
:: mounting 'PARTUUID=ee22ec15-01' on real root
mount: /new_root: can't find PARTUUID=ee22ec15-01.
You are now being dropped into an emergency shell.
sh: can't access tty; job control turned off
[rootfs ]#