[2018-07-18 20:39:43] [Output] : ★ Sheldon Canfield crouches down, before positioning the lift's arms underneath the side-
[2018-07-18 20:39:48] [Output] : ★ -of the 370Z.      ((Sheldon Canfield))
[2018-07-18 20:41:03] [Output] : ★ Sheldon Canfield walks towards the other side of the lift, then crouches down.
[2018-07-18 20:41:16] [Output] : ★ Sheldon Canfield carefully positions the lift's arms underneath the other side of the 370Z.
[2018-07-18 20:42:00] [Output] : ★ Sheldon Canfield reaches for the lift's control panel, then flicks the switch up, holding it there for a-
[2018-07-18 20:42:12] [Output] : ★ -while.      ((Sheldon Canfield))
[2018-07-18 20:42:37] [Output] : ★ The lift would move the car upwards.      ((Sheldon Canfield))
[2018-07-18 20:43:12] [Output] : ★ As the car is lifted halfway up, Sheldon releases the switch, stopping the lift.      ((Sheldon Canfield))
[2018-07-18 20:43:47] [Output] : ★ Sheldon Canfield walks towards the toolbox, then opens it, before reaching inside and taking out the-
[2018-07-18 20:43:51] [Output] : ★ following:      ((Sheldon Canfield))
[2018-07-18 20:45:35] [Output] : ★ A heavy duty power drill and a 17mm socket.      ((Sheldon Canfield))
[2018-07-18 20:46:04] [Output] : ★ Sheldon Canfield attaches the socket to the drill as he walks towards the rear of the 370Z.
[2018-07-18 20:46:30] [Output] : ★ Sheldon Canfield aims the power drill towards the rear wheel's lug nuts as he sets the drill to counter-
[2018-07-18 20:46:40] [Output] : ★ -clockwise.      ((Sheldon Canfield))
[2018-07-18 20:47:05] [Output] : ★ Sheldon Canfield uses the power drill to undo each lug nut, one by one.
[2018-07-18 20:47:20] [Output] : ★ The lug nuts would fall out, onto the floor after being loosened.      ((Sheldon Canfield))
[2018-07-18 20:49:33] [Output] : ★ Sheldon Canfield places the drill on the side of the lift, then grips the wheel with both hands.
[2018-07-18 20:49:48] [Output] : ★ Sheldon Canfield pulls the wheel off the hub, then carefully places it down behind him.
[2018-07-18 20:52:04] [Output] : ★ Sheldon Canfield walks towards the toolbox, then takes out a medium ratchet, a socket, an extension and a-
[2018-07-18 20:52:12] [Output] : ★ -spanner.      ((Sheldon Canfield))
[2018-07-18 20:52:27] [Output] : ★ Sheldon Canfield walks back towards the 370Z, taking the tools with him.
[2018-07-18 20:53:05] [Output] : ★ Sheldon Canfield attaches the socket to the ratchet, then places the extension on the floor.
[2018-07-18 20:53:41] [Output] : ★ Sheldon Canfield moves under the car, behind the rear wheel, as he sets the ratchet to clockwise.
[2018-07-18 20:54:14] [Output] : ★ Sheldon Canfield slips the ratchet over the bolt holding the lower shock mount to the knuckle, then-
[2018-07-18 20:54:29] [Output] : ★ -slips the spanner over the nut at the other end of the bolt, holding it in place.      ((Sheldon Canfield))
[2018-07-18 20:54:59] [Output] : ★ Sheldon Canfield turns the ratchet left a few times, undoing the bolt.
[2018-07-18 20:55:25] [Output] : ★ Sheldon Canfield places the tools down, then picks up the power drill.
[2018-07-18 20:56:00] [Output] : ★ Sheldon Canfield removes the 17mm socket, then attaches the extension, before detaching the smaller-
[2018-07-18 20:56:12] [Output] : ★ -socket from the ratchet and attaching it to the extension.      ((Sheldon Canfield))
[2018-07-18 20:56:59] [Output] : ★ Sheldon Canfield aims the power drill upwards, towards the two bolts located at the top shock mount.
[2018-07-18 20:57:10] [Output] : ★ Sheldon Canfield uses the power drill to undo each bolt, one after the other.
[2018-07-18 20:57:23] [Output] : ★ The bolts would fall out after being loosened.      ((Sheldon Canfield))
[2018-07-18 20:58:02] [Output] : ★ Sheldon Canfield grips the shock with both hands, then gives it a few tugs, pulling it out.
[2018-07-18 20:58:16] [Output] : ★ Sheldon Canfield places the shock on the floor, then walks towards the toolbox.
[2018-07-18 20:59:07] [Output] : ★ Sheldon Canfield picks up the pry bar propped up against the side of the toolbox, then walks back towards-
[2018-07-18 20:59:12] [Output] : ★ -the 370Z.      ((Sheldon Canfield))
[2018-07-18 20:59:49] [Output] : ★ Sheldon Canfield sticks the end of the pry bar under the spring, then pulls the handle downwards, prying-
[2018-07-18 21:00:05] [Output] : ★ -the spring out of the 'spring bucket'.      ((Sheldon Canfield))
[2018-07-18 21:00:27] [Output] : ★ Sheldon Canfield grips the spring, then pulls it out, before placing it on the floor.
[2018-07-18 21:02:15] [Output] : ★ Sheldon Canfield picks up the tools, then takes them with him as he walks towards the other side of the 370Z.
[2018-07-18 21:02:59] [Output] : ★ Sheldon Canfield places the tools down, then detaches the extension from the power drill, before attaching-
[2018-07-18 21:03:04] [Output] : ★ -the 17mm socket.      ((Sheldon Canfield))
[2018-07-18 21:04:18] [Output] : ★ Sheldon Canfield aims the power drill towards the other rear wheel's lug nuts, then starts loosening them,-
[2018-07-18 21:06:02] [Output] : ★ The lug nuts would fall out after being loosened.      ((Sheldon Canfield))
[2018-07-18 21:06:17] [Output] : ★ Sheldon Canfield places the power drill on the side of the lift, then grips the wheel with both hands.
[2018-07-18 21:06:36] [Output] : ★ Sheldon Canfield carefully slides the wheel off the hub, then places it on the floor, behind him.
[2018-07-18 21:10:34] [Output] : ★ Sheldon Canfield detaches the smaller socket from the extension, then attaches it to the ratchet.
[2018-07-18 21:11:09] [Output] : ★ Sheldon Canfield picks up the ratchet, along with the spanner, then moves underneath the car.
[2018-07-18 21:11:34] [Output] : ★ Sheldon Canfield slips the ratchet over the bolt holding the shock to the knuckle, then holds the spanner-
[2018-07-18 21:11:49] [Output] : ★ -over the nut at the other end of the bolt.      ((Sheldon Canfield))
[2018-07-18 21:12:10] [Output] : ★ Sheldon Canfield gives the ratchet a few tugs, breaking the bolt loose.
[2018-07-18 21:14:26] [Output] : ★ Sheldon Canfield continues turning the ratchet left to undo the bolt.
[2018-07-18 21:15:36] [Output] : ★ Sheldon Canfield places the tools down, before removing the bolt by hand.
[2018-07-18 21:17:29] [Output] : ★ Sheldon Canfield detaches the 17mm socket from the heavy duty power drill, then attaches the extension, along
[2018-07-18 21:17:33] [Output] : ★ -with a smaller socket.      ((Sheldon Canfield))
[2018-07-18 21:18:06] [Output] : ★ Sheldon Canfield aims the power drill towards the two bolts holding the top of the shock to the strut-
[2018-07-18 21:18:19] [Output] : ★ -tower, then loosens each bolt, one after the other.      ((Sheldon Canfield))
[2018-07-18 21:18:27] [Output] : ★ The bolts would fall out after being loosened.      ((Sheldon Canfield))
[2018-07-18 21:19:40] [Output] : ★ Sheldon Canfield places the power drill down, then grips the shock with both hands, giving it a few tugs.
[2018-07-18 21:20:02] [Output] : ★ Sheldon Canfield slides the bottom of the shock out of the knuckle, then pulls it out, before placing it on-
[2018-07-18 21:20:05] [Output] : ★ -the floor.      ((Sheldon Canfield))
[2018-07-18 21:20:06] [Output] : * Elise Harwood buckles in their seatbelt. *
[2018-07-18 21:23:28] [Output] : ★ Sheldon Canfield picks up the pry bar, then sticks the end of it under the spring.
[2018-07-18 21:23:50] [Output] : ★ Sheldon Canfield carefully pushes the other end downwards, prying the spring out of the 'spring bucket'.
[2018-07-18 21:24:05] [Output] : ★ Sheldon Canfield grabs the spring, then pulls it out, placing it on the floor.
[2018-07-18 21:27:20] [Output] : ★ Sheldon Canfield crouches down, then opens the Parts Shop MAX package containing the coilovers.
[2018-07-18 21:29:07] [Output] : ★ Sheldon Canfield takes out the coilover wrench, then uses it to lower the ride height setting on each-
[2018-07-18 21:29:12] [Output] : ★ -coilover.      ((Sheldon Canfield))
[2018-07-18 21:30:47] [Output] : ★ Sheldon Canfield drops the wrench back in the package, then takes out one of the rear coilovers, along-
[2018-07-18 21:30:56] [Output] : ★ -with the provided hardware.      ((Sheldon Canfield))
[2018-07-18 21:31:50] [Output] : ★ Sheldon Canfield lines the top of the coilover up with the strut tower, then slides the bottom of the-
[2018-07-18 21:32:30] [Output] : ★ -coilover into the knuckle, before hand-screwing the two top bolts in, followed by-      ((Sheldon Canfield))
[2018-07-18 21:32:55] [Output] : ★ -the bottom bolt along with the nut.      ((Sheldon Canfield))
[2018-07-18 21:33:21] [Output] : ★ Sheldon Canfield picks up the power drill, then aims it upwards as he sets it to clockwise.
[2018-07-18 21:33:49] [Output] : ★ Sheldon Canfield tightens each bolt one by one, using the power drill.
[2018-07-18 21:34:49] [Output] : ★ Sheldon Canfield places the power drill down, then picks up the ratchet along with the spanner.
[2018-07-18 21:35:24] [Output] : ★ Sheldon Canfield sets the ratchet to counter-clockwise, before slipping it over the bottom bolt.
[2018-07-18 21:35:41] [Output] : ★ Sheldon Canfield slides the spanner over the nut at the other end of the bolt, holding it in place.
[2018-07-18 21:36:16] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, tightening the bolt, then pulls the spanner to fasten-
[2018-07-18 21:36:24] [Output] : ★ -the nut down.      ((Sheldon Canfield))
[2018-07-18 21:37:07] [Output] : ★ Sheldon Canfield picks up the rest of the tools, then carries them towards the other side of the 370Z.
[2018-07-18 21:37:24] [Output] : ★ Sheldon Canfield walks towards the Parts Shop MAX package, then pulls out the other rear coilover, along-
[2018-07-18 21:37:30] [Output] : ★ -with the provided nuts and bolts.      ((Sheldon Canfield))
[2018-07-18 21:38:01] [Output] : ★ Sheldon Canfield walks back towards the 370Z, taking the coilover with him.
[2018-07-18 21:38:26] [Output] : ★ Sheldon Canfield lines up the top of the coilover with the strut tower, hand-screwing in the two top bolts-
[2018-07-18 21:38:35] [Output] : ★ -as he holds it in place.      ((Sheldon Canfield))
[2018-07-18 21:38:57] [Output] : ★ Sheldon Canfield slides the bottom of the coilover into the knuckle, then hand-screws the bottom bolt in,-
[2018-07-18 21:39:11] [Output] : ★ -screwing the nut over the end of the bolt afterwards.      ((Sheldon Canfield))
[2018-07-18 21:39:28] [Output] : ★ Sheldon Canfield picks up the power drill, then aims it towards the two top bolts.
[2018-07-18 21:40:49] [Output] : ★ Sheldon Canfield uses the power drill to tighten each bolt, one after the other.
[2018-07-18 21:45:16] [Output] : ★ Sheldon Canfield places the power drill down, then picks up the ratchet, attaching the smaller socket to it.
[2018-07-18 21:45:44] [Output] : ★ Sheldon Canfield slides the ratchet over the bottom bolt, then picks up the spanner, before holding it over-
[2018-07-18 21:45:57] [Output] : ★ -the nut at the other end of the bolt.      ((Sheldon Canfield))
[2018-07-18 21:46:07] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, tightening the bolt.
[2018-07-18 21:46:32] [Output] : ★ Sheldon Canfield gives the spanner a few tugs, fastening the nut down.
[2018-07-18 21:47:47] [Output] : ★ Sheldon Canfield places the power drill down, then walks towards the pile of Ambit wheels wrapped in Pirelli-
[2018-07-18 21:47:55] [Output] : ★ P Zero all season tires.      ((Sheldon Canfield))
[2018-07-18 21:48:26] [Output] : ★ Sheldon Canfield lifts two of the wheels off the pile, then rolls them towards the 370Z.
[2018-07-18 21:49:05] [Output] : ★ Sheldon Canfield sets one of the wheels down at one side of the 370Z, then rolls the other towards the other-
[2018-07-18 21:49:13] [Output] : ★ -side, setting it down on the floor.      ((Sheldon Canfield))
[2018-07-18 21:50:00] [Output] : ★ Sheldon Canfield lifts the wheel up, then slides it over the lug studs, onto the rear hub.
[2018-07-18 21:50:38] [Output] : ★ Sheldon Canfield picks up the five lug nuts, then hand-screws them onto the studs.
[2018-07-18 21:51:13] [Output] : ★ Sheldon Canfield picks up the heavy duty power drill, then removes the extension, before attaching the-
[2018-07-18 21:51:17] [Output] : ★ -17mm socket.      ((Sheldon Canfield))
[2018-07-18 21:51:53] [Output] : ★ Sheldon Canfield aims the power drill towards the lug nuts, then starts tightening them one by one, in a star
[2018-07-18 21:51:55] [Output] : ★ -formation.      ((Sheldon Canfield))
[2018-07-18 21:52:13] [Output] : ★ Sheldon Canfield walks towards the other side of the 370Z, taking the power drill with him.
[2018-07-18 21:52:38] [Output] : ★ Sheldon Canfield places the power drill on the side of the lift, before reaching for the Ambit wheel.
[2018-07-18 21:53:02] [Output] : ★ Sheldon Canfield lifts the wheel up, then slides it over the lug studs, onto the rear hub, before hand-
[2018-07-18 21:53:09] [Output] : ★ -screwing the lug nuts in.      ((Sheldon Canfield))
[2018-07-18 21:53:28] [Output] : ★ Sheldon Canfield picks up the heavy duty power drill, then uses it to tighten each lug nut one by one, in-
[2018-07-18 21:53:32] [Output] : ★ -a star formation.      ((Sheldon Canfield))
[2018-07-18 21:54:33] [Output] : ★ Sheldon Canfield walks towards the front of the 370Z, then sets the power drill to counter-clockwise,-
[2018-07-18 21:54:42] [Output] : ★ -before aiming it towards the front wheel's lug nuts.      ((Sheldon Canfield))
[2018-07-18 21:55:12] [Output] : ★ Sheldon Canfield uses the power drill to undo each lug nut, one by one.
[2018-07-18 21:55:25] [Output] : ★ The lug nuts would fall out after being loosened.      ((Sheldon Canfield))
[2018-07-18 21:56:21] [Output] : ★ Sheldon Canfield places the power drill on the side of the lift, then grips the wheel with both hands.
[2018-07-18 21:56:37] [Output] : ★ Sheldon Canfield grunts, as he pulls the wheel off the hub, turning around and placing it on the floor.
[2018-07-18 22:00:10] [Output] : ★ Sheldon Canfield picks up the ratchet, along with the spanner.
[2018-07-18 22:00:32] [Output] : ★ Sheldon Canfield sets the ratchet to counter-clockwise, before sliding it over the bolt holding the bottom-
[2018-07-18 22:00:40] [Output] : ★ -of the shock to the lower control arm.      ((Sheldon Canfield))
[2018-07-18 22:00:52] [Output] : ★ Sheldon Canfield slides the spanner over the nut, holding it in place.
[2018-07-18 22:01:10] [Output] : ★ Sheldon Canfield turns the ratchet left a few times, loosening the bolt.
[2018-07-18 22:01:29] [Output] : ★ removes the bolt by hand, placing it on the floor along with the nut.      ((Sheldon Canfield))
[2018-07-18 22:02:51] [Output] : ★ Sheldon Canfield picks up the tools, taking them with him as he walks towards the other side of the car.
[2018-07-18 22:03:12] [Output] : ★ Sheldon Canfield places most of the tools down, then aims the power drill towards the front wheel's lug nuts.
[2018-07-18 22:04:10] [Output] : ★ Sheldon Canfield uses the power drill to loosen each lug nut, one by one.
[2018-07-18 22:04:21] [Output] : ★ The lug nuts would fall out after being loosened.      ((Sheldon Canfield))
[2018-07-18 22:05:56] [Output] : ★ Sheldon Canfield places the power drill on the side of the lift, then grips the wheel with both hands.
[2018-07-18 22:06:39] [Output] : ★ Sheldon Canfield pulls the wheel off the hub, then places it down behind him.
[2018-07-18 22:07:11] [Output] : ★ Sheldon Canfield picks up the ratchet, along with the spanner.
[2018-07-18 22:11:30] [Output] : ★ Sheldon Canfield slides the ratchet over the shock's bottom bolt, then holds the spanner over the nut at the-
[2018-07-18 22:11:36] [Output] : ★ -other end of the bolt.      ((Sheldon Canfield))
[2018-07-18 22:11:47] [Output] : ★ Sheldon Canfield turns the ratchet left a few times, loosening the bolt.
[2018-07-18 22:13:12] [Output] : ★ Sheldon Canfield removes the bolt by hand, then moves away from the car, reaching for the lift controls.
[2018-07-18 22:13:28] [Output] : ★ Sheldon Canfield flicks the switch down, holding it there for a moment.
[2018-07-18 22:14:10] [Output] : ★ After lowering the car a few inches off the ground, Sheldon releases the switch.      ((Sheldon Canfield))
[2018-07-18 22:14:37] [Output] : ★ Sheldon Canfield opens the driver's side door, then leans inside, pulling the hood release.
[2018-07-18 22:15:32] [Output] : ★ Sheldon Canfield gets out of the car, then closes the door, before walking towards the front end.
[2018-07-18 22:17:16] [Output] : ★ Sheldon Canfield opens the hood, before putting up the support rod.
[2018-07-18 22:19:04] [Output] : ★ Sheldon Canfield reaches over, positioning the ratchet near the three nuts holding the top of the shock-
[2018-07-18 22:19:14] [Output] : ★ -to the strut tower.      ((Sheldon Canfield))
[2018-07-18 22:19:39] [Output] : ★ Sheldon Canfield loosens each nut using the ratchet, before unscrewing them off the studs by hand.
[2018-07-18 22:20:15] [Output] : ★ Sheldon Canfield places the ratchet and the nuts on the floor, then reaches under the wheel well, gripping-
[2018-07-18 22:20:19] [Output] : ★ -the shock with both hands.      ((Sheldon Canfield))
[2018-07-18 22:20:31] [Output] : ★ Sheldon Canfield gives the shock a few tugs, before pulling it out with the spring.
[2018-07-18 22:22:19] [Output] : ★ Sheldon Canfield picks up the ratchet, then walks towards the other side of the 370Z.
[2018-07-18 22:22:51] [Output] : ★ Sheldon Canfield reaches over, positioning the ratchet near the nuts holding the top of the shock to the-
[2018-07-18 22:23:03] [Output] : ★ -strut tower, before loosening each of them, one by one.      ((Sheldon Canfield))
[2018-07-18 22:23:28] [Output] : ★ Sheldon Canfield removes the nuts by hand, then places them on the floor, along with the ratchet.
[2018-07-18 22:25:54] [Output] : ★ Sheldon Canfield grips the shock with both hands, then carefully pulls it out, along with the spring.
[2018-07-18 22:26:14] [Output] : ★ Sheldon Canfield places the shock and the spring on the floor.
[2018-07-18 22:28:07] [Output] : ★ Sheldon Canfield reaches into the Parts Shop MAX package, then pulls out one of the front coilovers, along-
[2018-07-18 22:28:23] [Output] : ★ -with the provided nuts and bolts.      ((Sheldon Canfield))
[2018-07-18 22:29:46] [Output] : ★ Sheldon Canfield slides the bottom of the coilover over the front lower control arm, then lines the studs up-
[2018-07-18 22:29:51] [Output] : ★ -with the strut tower.      ((Sheldon Canfield))
[2018-07-18 22:30:20] [Output] : ★ Sheldon Canfield reaches over, handscrewing the nuts over the studs, before hand-screwing the bolt-
[2018-07-18 22:30:48] [Output] : ★ -into the bottom of the coilover, followed by the nut.      ((Sheldon Canfield))
[2018-07-18 22:32:54] [Output] : ★ Sheldon Canfield picks up the ratchet, along with the spanner.
[2018-07-18 22:33:30] [Output] : ★ Sheldon Canfield sets the ratchet to counter-clockwise, before sliding it over the coilover's bottom bolt.
[2018-07-18 22:33:54] [Output] : ★ Sheldon Canfield holds the spanner over the nut, as he turns the ratchet right a few times to tighten the-
[2018-07-18 22:33:58] [Output] : ★ -bolt.      ((Sheldon Canfield))
[2018-07-18 22:34:06] [Output] : ★ Sheldon Canfield gives the spanner a few tugs to tighten the nut.
[2018-07-18 22:36:29] [Output] : ★ Sheldon Canfield moves towards the other side of the 370Z, taking the tools with him.
[2018-07-18 22:36:47] [Output] : ★ Sheldon Canfield places the tools down, then walks towards the Parts Shop MAX package.
[2018-07-18 22:37:11] [Output] : ★ Sheldon Canfield pulls out the other front coilover, along with the provided nuts and bolts.
[2018-07-18 22:38:57] [Output] : ★ Sheldon Canfield carries the coilover back towards the other side of the 370Z.
[2018-07-18 22:39:18] [Output] : ★ Sheldon Canfield crouches down, then slides the bottom of the coilover over the front lower control arm,-
[2018-07-18 22:39:40] [Output] : ★ -hand-screwing in the bottom bolt, followed by the nut, as he holds it in place.      ((Sheldon Canfield))
[2018-07-18 22:40:05] [Output] : ★ Sheldon Canfield lines up the top of the coilover with the strut tower, then reaches over to hand-screw the-
[2018-07-18 22:40:09] [Output] : ★ -nuts over the studs.      ((Sheldon Canfield))
[2018-07-18 22:42:51] [Output] : ★ Sheldon Canfield picks up the ratchet, then uses it to tighten each of the three nuts, one by one.
[2018-07-18 22:43:20] [Output] : ★ Sheldon Canfield crouches down, then slides the ratchet over the coilover's bottom bolt, picking up the-
[2018-07-18 22:43:33] [Output] : ★ -spanner and holding it over the nut as he does so.      ((Sheldon Canfield))
[2018-07-18 22:43:53] [Output] : ★ Sheldon Canfield turns the ratchet right a few times, tightening the bolt.
[2018-07-18 22:44:02] [Output] : ★ Sheldon Canfield gives the spanner a few tugs, tightening the nut.
[2018-07-18 22:44:20] [Output] : ★ Sheldon Canfield stands up, then lowers the support rod, before slamming the hood shut.
[2018-07-18 22:48:52] [Output] : ★ Sheldon Canfield walks towards the remaining Ambit wheels, then lifts them off the floor.
[2018-07-18 22:49:11] [Output] : ★ Sheldon Canfield begins rolling the wheels towards the 370Z, setting them down either side of the car.
[2018-07-18 22:49:33] [Output] : ★ Sheldon Canfield lifts the wheel up, then slides it over the lug studs, onto the front hub, before-
[2018-07-18 22:49:41] [Output] : ★ -hand-screwing the lug nuts in.      ((Sheldon Canfield))
[2018-07-18 22:49:59] [Output] : ★ Sheldon Canfield picks up the heavy duty power drill, then sets it to clockwise, before aiming it towards-
[2018-07-18 22:50:04] [Output] : ★ -the lug nuts.      ((Sheldon Canfield))
[2018-07-18 22:50:20] [Output] : ★ Sheldon Canfield uses the power drill to tighten each lug nut one by one, in a star formation.
[2018-07-18 22:50:45] [Output] : ★ Sheldon Canfield walks towards the other side of the 370Z, then places the power drill down.
[2018-07-18 22:51:04] [Output] : ★ Sheldon Canfield lifts the wheel up, then slides it over the lug studs, onto the hub, before hand-screwing-
[2018-07-18 22:51:08] [Output] : ★ -the lug nuts in.      ((Sheldon Canfield))
[2018-07-18 22:51:24] [Output] : ★ Sheldon Canfield picks up the power drill, then uses it to tighten each lug nut one by one, in a star-
[2018-07-18 22:51:28] [Output] : ★ -formation.      ((Sheldon Canfield))
[2018-07-18 22:51:52] [Output] : ★ Sheldon Canfield reaches for the lift controls, then flicks the switch down, holding it there until the car-
[2018-07-18 22:51:57] [Output] : ★ -is on the floor.      ((Sheldon Canfield))