Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
- Home page is http://smartmontools.sourceforge.net/
- === START OF INFORMATION SECTION ===
- Device Model: ST500DM002-1BD142
- Serial Number: W2AJDLQM
- Firmware Version: KC65
- User Capacity: 500,107,862,016 bytes
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 4
- Local Time is: Thu Mar 22 11:04:27 2018 ART
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 600) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 81) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x303f) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 105 088 006 Pre-fail Always - 7531592
- 3 Spin_Up_Time 0x0003 100 098 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2063
- 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 322089753
- 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 14913
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 990
- 183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 036 036 000 Old_age Always - 64
- 188 Unknown_Attribute 0x0032 100 098 000 Old_age Always - 12885098506
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 061 048 045 Old_age Always - 39 (Lifetime Min/Max 38/40)
- 194 Temperature_Celsius 0x0022 039 052 000 Old_age Always - 39 (0 11 0 0)
- 195 Hardware_ECC_Recovered 0x001a 040 016 000 Old_age Always - 7531592
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 251440270424654
- 241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 1220048228
- 242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 4088396776
- SMART Error Log Version: 1
- ATA Error Count: 20 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 20 occurred at disk power-on lifetime: 5750 hours (239 days + 14 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 e8 9d 09 00 Error: UNC at LBA = 0x00099de8 = 630248
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 e8 9d 09 e0 00 01:21:55.658 READ DMA EXT
- 25 00 08 08 da c6 e3 00 01:21:55.647 READ DMA EXT
- 25 00 08 e0 9d 09 e0 00 01:21:55.631 READ DMA EXT
- 35 00 48 20 8e d4 e3 00 01:21:55.603 WRITE DMA EXT
- 35 00 10 00 60 ad e1 00 01:21:55.603 WRITE DMA EXT
- Error 19 occurred at disk power-on lifetime: 5750 hours (239 days + 14 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 e8 9d 09 00 Error: UNC at LBA = 0x00099de8 = 630248
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 20 e0 9d 09 e0 00 01:21:51.760 READ DMA EXT
- 35 00 20 80 23 74 e7 00 01:21:51.717 WRITE DMA EXT
- 35 00 40 a0 d9 74 e7 00 01:21:51.716 WRITE DMA EXT
- 25 00 40 40 82 09 e0 00 01:21:51.696 READ DMA EXT
- 35 00 20 80 23 74 e7 00 01:21:51.685 WRITE DMA EXT
- Error 18 occurred at disk power-on lifetime: 5749 hours (239 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 e8 9d 09 00 Error: UNC at LBA = 0x00099de8 = 630248
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 e8 9d 09 e0 00 01:16:08.139 READ DMA EXT
- 25 00 24 ff ff ff ef 00 01:16:08.089 READ DMA EXT
- 25 00 40 ff ff ff ef 00 01:16:08.087 READ DMA EXT
- 25 00 c0 ff ff ff ef 00 01:16:08.087 READ DMA EXT
- 25 00 40 ff ff ff ef 00 01:16:08.086 READ DMA EXT
- Error 17 occurred at disk power-on lifetime: 5749 hours (239 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 e8 9d 09 00 Error: UNC at LBA = 0x00099de8 = 630248
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 20 e0 9d 09 e0 00 01:16:03.584 READ DMA EXT
- 25 00 30 00 8c e8 e0 00 01:16:03.563 READ DMA EXT
- 25 00 28 ff ff ff ef 00 01:16:03.531 READ DMA EXT
- 25 00 c0 ff ff ff ef 00 01:16:03.526 READ DMA EXT
- 25 00 40 ff ff ff ef 00 01:16:03.525 READ DMA EXT
- Error 16 occurred at disk power-on lifetime: 5749 hours (239 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 e8 9d 09 00 Error: UNC at LBA = 0x00099de8 = 630248
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 e8 9d 09 e0 00 01:09:44.569 READ DMA EXT
- 25 00 08 e0 9d 09 e0 00 01:09:44.529 READ DMA EXT
- 35 00 08 a0 45 69 ed 00 01:09:44.489 WRITE DMA EXT
- 35 00 08 a8 45 69 ed 00 01:09:44.489 WRITE DMA EXT
- 25 00 20 00 9b 3d e7 00 01:09:44.481 READ DMA EXT
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement