API tools faq
paste
Advertisement
Guest User

X31-TLP-BAT

a guest
Apr 7th, 2017
108
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.63 KB | None | 0 0
raw download clone embed print report
  1. --- TLP 0.9.902 --------------------------------------------
  2.  
  3. +++ Configured Settings: /etc/default/tlp
  4. TLP_ENABLE=1
  5. TLP_DEFAULT_MODE=AC
  6. TLP_PERSISTENT_DEFAULT=0
  7. DISK_IDLE_SECS_ON_AC=0
  8. DISK_IDLE_SECS_ON_BAT=2
  9. MAX_LOST_WORK_SECS_ON_AC=15
  10. MAX_LOST_WORK_SECS_ON_BAT=60
  11. CPU_HWP_ON_AC=balance_performance
  12. CPU_HWP_ON_BAT=balance_power
  13. SCHED_POWERSAVE_ON_AC=0
  14. SCHED_POWERSAVE_ON_BAT=1
  15. NMI_WATCHDOG=0
  16. ENERGY_PERF_POLICY_ON_AC=performance
  17. ENERGY_PERF_POLICY_ON_BAT=powersave
  18. DISK_DEVICES="sda sdb"
  19. DISK_APM_LEVEL_ON_AC="254 254"
  20. DISK_APM_LEVEL_ON_BAT="128 128"
  21. SATA_LINKPWR_ON_AC=max_performance
  22. SATA_LINKPWR_ON_BAT=min_power
  23. AHCI_RUNTIME_PM_TIMEOUT=15
  24. PCIE_ASPM_ON_AC=performance
  25. PCIE_ASPM_ON_BAT=powersave
  26. RADEON_POWER_PROFILE_ON_AC=high
  27. RADEON_POWER_PROFILE_ON_BAT=low
  28. RADEON_DPM_STATE_ON_AC=performance
  29. RADEON_DPM_STATE_ON_BAT=battery
  30. RADEON_DPM_PERF_LEVEL_ON_AC=auto
  31. RADEON_DPM_PERF_LEVEL_ON_BAT=auto
  32. WIFI_PWR_ON_AC=off
  33. WIFI_PWR_ON_BAT=on
  34. WOL_DISABLE=Y
  35. SOUND_POWER_SAVE_ON_AC=0
  36. SOUND_POWER_SAVE_ON_BAT=1
  37. SOUND_POWER_SAVE_CONTROLLER=Y
  38. BAY_POWEROFF_ON_AC=0
  39. BAY_POWEROFF_ON_BAT=0
  40. BAY_DEVICE="sr0"
  41. RUNTIME_PM_ON_AC=on
  42. RUNTIME_PM_ON_BAT=auto
  43. USB_AUTOSUSPEND=1
  44. USB_BLACKLIST_BTUSB=0
  45. USB_BLACKLIST_PHONE=0
  46. USB_BLACKLIST_WWAN=1
  47. RESTORE_DEVICE_STATE_ON_STARTUP=0
  48. DEVICES_TO_DISABLE_ON_STARTUP="wifi"
  49.  
  50. +++ System Info
  51. System = IBM SERIAL# CBG  nkPad X31
  52. BIOS = 1QET97WW (3.02 )
  53. Release = Debian GNU/Linux 7.11 (wheezy)
  54. Kernel = 3.2.0-4-486 #1 Debian 3.2.86-1 i686
  55. /proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486 root=UUID=9e5f4a18-64ac-4ccc-8230-b904c08bb3a9 ro quiet
  56. Init system = sysvinit
  57. Boot mode = BIOS (CSM, Legacy)
  58.  
  59. +++ TLP Status
  60. State = enabled
  61. Last run = 14:31:41, 8 sec(s) ago
  62. Mode = battery
  63. Power source = battery
  64.  
  65. +++ Processor
  66. CPU model = Intel(R) Pentium(R) M processor 1400MHz
  67.  
  68. /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = acpi-cpufreq
  69. /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
  70. /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = conservative userspace powersave ondemand performance
  71. /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 600000 [kHz]
  72. /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 1400000 [kHz]
  73. /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 1400000 1200000 1000000 800000 600000 [kHz]
  74.  
  75. /sys/devices/system/cpu/cpufreq/boost = (not available)
  76.  
  77. x86_energy_perf_policy: program not installed.
  78.  
  79. /sys/module/workqueue/parameters/power_efficient = (not available)
  80. /proc/sys/kernel/nmi_watchdog = 0
  81.  
  82. +++ Undervolting
  83. PHC kernel not available.
  84.  
  85. +++ Temperatures
  86. /proc/acpi/ibm/thermal = 38 -128 39 37 33 -128 26 -128 [°C]
  87. Fan speed (fan1) = 0 [/min]
  88.  
  89. +++ File System
  90. /proc/sys/vm/laptop_mode = 2
  91. /proc/sys/vm/dirty_writeback_centisecs = 6000
  92. /proc/sys/vm/dirty_expire_centisecs = 6000
  93. /proc/sys/vm/dirty_ratio = 20
  94. /proc/sys/vm/dirty_background_ratio = 10
  95.  
  96. +++ Storage Devices
  97. /dev/sda:
  98. Model = SAMSUNG MP0402H
  99. Firmware = YQ200-05
  100. APM Level = 128
  101. Status = active/idle
  102. Scheduler = cfq
  103.  
  104. Runtime PM: control = on, autosuspend_delay =
  105.  
  106. SMART info:
  107. 4 Start_Stop_Count = 354
  108. 5 Reallocated_Sector_Ct = 0
  109. 12 Power_Cycle_Count = 155
  110. 191 G-Sense_Error_Rate = 596
  111. 194 Temperature_Celsius = 33 [°C]
  112. 225 Load_Cycle_Count = 8150
  113.  
  114.  
  115. +++ SATA Aggressive Link Power Management
  116. No AHCI-enabled host controller detected.
  117.  
  118. +++ AHCI Host Controller Runtime Power Management
  119. /sys/bus/pci/devices/0000:00:1f.1/ata1/power/control = auto
  120. /sys/bus/pci/devices/0000:00:1f.1/ata2/power/control = auto
  121.  
  122. +++ Docks and Device Bays
  123. /sys/devices/platform/dock.0: dock_station = undocked
  124. /sys/devices/platform/dock.1: battery_bay = no battery
  125. /sys/devices/platform/dock.2: ata_bay = no drive (or powered off)
  126.  
  127. +++ PCIe Active State Power Management
  128. /sys/module/pcie_aspm/parameters/policy = powersave
  129.  
  130. +++ Wireless
  131. bluetooth = none (no device)
  132. wifi = off (software)
  133. wwan = none (no device)
  134.  
  135. eth1(ipw2100) : wifi, not connected, power management = on
  136.  
  137. +++ Audio
  138. /sys/module/snd_ac97_codec/parameters/power_save = 1
  139.  
  140. +++ Runtime Power Management
  141. Device blacklist = (not configured)
  142. Driver blacklist = amdgpu nouveau nvidia radeon (default)
  143.  
  144. /sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, agpgart-intel)
  145. /sys/bus/pci/devices/0000:00:01.0/power/control = auto (0x060400, PCI bridge, no driver)
  146. /sys/bus/pci/devices/0000:00:1d.0/power/control = auto (0x0c0300, USB controller, uhci_hcd)
  147. /sys/bus/pci/devices/0000:00:1d.1/power/control = auto (0x0c0300, USB controller, uhci_hcd)
  148. /sys/bus/pci/devices/0000:00:1d.2/power/control = auto (0x0c0300, USB controller, uhci_hcd)
  149. /sys/bus/pci/devices/0000:00:1d.7/power/control = auto (0x0c0320, USB controller, ehci_hcd)
  150. /sys/bus/pci/devices/0000:00:1e.0/power/control = auto (0x060400, PCI bridge, no driver)
  151. /sys/bus/pci/devices/0000:00:1f.0/power/control = auto (0x060100, ISA bridge, no driver)
  152. /sys/bus/pci/devices/0000:00:1f.1/power/control = auto (0x01018a, IDE interface, ata_piix)
  153. /sys/bus/pci/devices/0000:00:1f.3/power/control = auto (0x0c0500, SMBus, i801_smbus)
  154. /sys/bus/pci/devices/0000:00:1f.5/power/control = auto (0x040100, Multimedia audio controller, snd_intel8x0)
  155. /sys/bus/pci/devices/0000:00:1f.6/power/control = auto (0x070300, Modem, snd_intel8x0m)
  156. /sys/bus/pci/devices/0000:01:00.0/power/control = auto (0x030000, VGA compatible controller, no driver)
  157. /sys/bus/pci/devices/0000:02:00.0/power/control = auto (0x060700, CardBus bridge, yenta_cardbus)
  158. /sys/bus/pci/devices/0000:02:00.1/power/control = auto (0x060700, CardBus bridge, yenta_cardbus)
  159. /sys/bus/pci/devices/0000:02:00.2/power/control = auto (0x0c0010, FireWire (IEEE 1394), firewire_ohci)
  160. /sys/bus/pci/devices/0000:02:02.0/power/control = auto (0x028000, Network controller, ipw2100)
  161. /sys/bus/pci/devices/0000:02:08.0/power/control = auto (0x020000, Ethernet controller, e100)
  162.  
  163. +++ USB
  164. Autosuspend = enabled
  165. Device whitelist = (not configured)
  166. Device blacklist = (not configured)
  167. Bluetooth blacklist = disabled
  168. Phone blacklist = disabled
  169. WWAN blacklist = enabled
  170.  
  171. Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 2000 -- Linux Foundation 2.0 root hub (hub)
  172. Bus 002 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 2000 -- Linux Foundation 1.1 root hub (hub)
  173. Bus 003 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 2000 -- Linux Foundation 1.1 root hub (hub)
  174. Bus 004 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 2000 -- Linux Foundation 1.1 root hub (hub)
  175.  
  176. +++ Battery Status
  177. /sys/class/power_supply/BAT0/manufacturer = SANYO
  178. /sys/class/power_supply/BAT0/model_name = IBM-08K8040
  179. /sys/class/power_supply/BAT0/cycle_count = (not supported)
  180. /sys/class/power_supply/BAT0/energy_full_design = 47520 [mWh]
  181. /sys/class/power_supply/BAT0/energy_full = 5520 [mWh]
  182. /sys/class/power_supply/BAT0/energy_now = 0 [mWh]
  183. /sys/class/power_supply/BAT0/power_now = 12077 [mW]
  184. /sys/class/power_supply/BAT0/status = Discharging
  185.  
  186. Charge = 0.0 [%]
  187. Capacity = 11.6 [%]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!