NAS eTRAYz Xtreamer without HDD

U-Boot 1.1.2 (Jan 19 2010 - 17:23:36)

U-Boot code: 48D00000 -> 48D1B860  BSS: -> 48D1F670
RAM Configuration:
        Bank #0: 48000000 128 MB
SRAM Configuration:
        128KB at 0x58000000
Flash:  4 MB
In:    serial
Out:   serial
Err:   serial
Extinguish LED
Light LED
Initialising disks
No FIS received from device 0
No FIS received from device 0
No FIS received from device 1
No FIS received from device 1
ide_preinit failed
Hit any key to stop autoboot:  0
## Booting image at 41020000 ...
   Image Name:   Linux-2.6.24.4
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1614872 Bytes =  1.5 MB
   Load Address: 48008000
   Entry Point:  48008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 4a000000 ...
   Image Name:   Ramdisk
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    2262100 Bytes =  2.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux.............................................................
......................................... done, booting the kernel.
Linux version 2.6.24.4 (root@etrayz-build) ( cc version 4.2.1) #1 Tue Jan 19 17:
28:40 KST 2010
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: Oxsemi NAS
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: console=ttyS0,115200 ro mac_adr=0x00,0x1c,0x85,0x20,0x4a,0x
fe mem=128M root=/dev/ram0
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour dummy device 80x30
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 124316KB available (2940K code, 156K data, 108K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
Number of DMA channels = 5, version = 4
Allocating 891 SRAM generic DMA descriptors
Chip Id: die-id 0x0dc9da7170c0 read back 0xbeefcafe
PCI: bus0: Fast back to back transfers enabled
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 2209K
Init Macpower NT2-GIGA-NAS(OX810) GPIO driver...
GPIO driver registered
thermAndFan: initializing - ox810
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug
enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ÿserial8250: ttyS0 at MMIO 0x44900000 (irq = 0) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
lloop: modue loaded
Driver 'sd' needs updating - please use bus_type methods
ox810sata: OX810 sata core.
scsi0 : oxnassata
ata1: SATA max UDMA/133 irq 18
ata1: SATA link down (SStatus 0 SControl 300)
ox810sata: OX810 sata core.
scsi1 : oxnassata
ata2: SATA max UDMA/133 irq 18
ata2: SATA link down (SStatus 0 SControl 300)
physmap platform flash device: 00400000 at 41000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
rtc-ds1307 0-0068: rtc core: registered m41t00 as rtc0
OXNAS bit-bash I2C driver initialisation OK
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-ds1307 0-0068: setting system clock to 2017-08-03 18:43:06 UTC (1501785786)
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 108K
gmac: Unknown symbol mii_ethtool_sset
gmac: Unknown symbol mii_check_media_ex
gmac: Unknown symbol mii_check_link
gmac: Unknown symbol mii_nway_restart
gmac: Unknown symbol mii_ethtool_gset
Probing for Synopsis GMAC, unit 0
eth0: PHY is LSI ET1011C
eth0: GMAC ver = 51, vendor ver = 17 at 0xe8000000, IRQ 8
eth0: Found PHY at address 1, type 0x0282f014 -> 10/100/1000
eth0: Ethernet addr: 00:1c:85:20:4a:fe
eth0: PHY is LSI ET1011C
CoPro: Programming start address as 0x9801e000 (basic adr = 0x9801e000)
eth0: LSI ET1011C PHY no Rx clk workaround start
Resetting GMAC
eth0: LSI ET1011C PHY no Rx clk workaround end
GMAC reset complete
none scsi0
none scsi1
eth0: PHY is LSI ET1011C
eth0: link down
rtc_time        : 18:43:13
rtc_date        : 2017-08-03
24hr            : yes
Thu Aug  3 18:43:13 UTC 2017
rtc_time        : 18:43:13
rtc_date        : 2017-08-03
24hr            : yes
Thu Aug  3 18:43:13 UTC 2017
Thu Aug  3 18:43:13 2017  0.000000 seconds
Thu Aug  3 18:43:13 2017  0.000000 seconds
Thu Aug  3 18:43:13 UTC 2017
Thu Aug  3 18:43:13 UTC 2017
rdate: bad address 'time.bora.net'
Thu Aug  3 18:43:13 2017  0.000000 seconds
Thu Aug  3 18:43:14 2017  0.000000 seconds
Thu Aug  3 18:43:13 UTC 2017
/bin/sh: can't access tty; job control turned off
/ #