Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 0.090069] PTP clock support registered
- [ 0.090433] wmi: Mapper loaded
- [ 0.091104] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.091268] PCI: Using ACPI for IRQ routing
- [ 0.091383] PCI: pci_cache_line_size set to 64 bytes
- [ 0.091440] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
- [ 0.091444] e820: reserve RAM buffer [mem 0x4fff0000-0x4fffffff]
- [ 0.091764] NetLabel: Initializing
- [ 0.091876] NetLabel: domain hash size = 128
- [ 0.092018] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.092149] NetLabel: unlabeled traffic allowed by default
- [ 0.092507] Switched to clocksource refined-jiffies
- [ 0.098245] pnp: PnP ACPI init
- [ 0.098378] ACPI: bus type PNP registered
- [ 0.098892] system 00:00: [mem 0x000d0000-0x000d7fff] has been reserved
- [ 0.099019] system 00:00: [mem 0x000da000-0x000dbfff] has been reserved
- [ 0.099135] system 00:00: [mem 0x000f0000-0x000fbfff] could not be reserved
- [ 0.099250] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
- [ 0.099366] system 00:00: [mem 0x4fff0000-0x4fffffff] could not be reserved
- [ 0.099482] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
- [ 0.099598] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.099714] system 00:00: [mem 0x00100000-0x4ffeffff] could not be reserved
- [ 0.099830] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.099946] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.100004] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
- [ 0.100121] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.100238] system 00:01: [io 0x4000-0x407f] has been reserved
- [ 0.100354] system 00:01: [io 0x40f0-0x40ff] has been reserved
- [ 0.100468] system 00:01: [io 0x5000-0x500f] has been reserved
- [ 0.100583] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.101187] system 00:02: [io 0x04d0-0x04d1] has been reserved
- [ 0.101303] system 00:02: [io 0x0290-0x029f] has been reserved
- [ 0.101417] system 00:02: [io 0x0800-0x0805] has been reserved
- [ 0.101532] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.101561] pnp 00:03: [dma 4]
- [ 0.101626] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.101717] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.101788] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.101865] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.102074] pnp 00:07: [dma 2]
- [ 0.102174] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.102495] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.102823] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.103268] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 0.103481] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
- [ 0.103546] pnp: PnP ACPI: found 12 devices
- [ 0.103660] ACPI: bus type PNP unregistered
- [ 0.143947] Switched to clocksource acpi_pm
- [ 0.143947] pci 0000:01:00.0: BAR 6: assigned [mem 0xe6000000-0xe601ffff pref]
- [ 0.143947] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.143947] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe6ffffff]
- [ 0.143947] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
- [ 0.143947] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.143947] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
- [ 0.143947] pci_bus 0000:00: resource 6 [mem 0x50000000-0xffffffff]
- [ 0.143947] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe6ffffff]
- [ 0.143947] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
- [ 0.143947] NET: Registered protocol family 2
- [ 0.144171] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.144320] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.144491] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.144670] TCP: reno registered
- [ 0.144782] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.144910] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.145178] NET: Registered protocol family 1
- [ 0.145433] RPC: Registered named UNIX socket transport module.
- [ 0.145546] RPC: Registered udp transport module.
- [ 0.145657] RPC: Registered tcp transport module.
- [ 0.145768] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.145891] pci 0000:00:00.0: MSI quirk detected; MSI disabled
- [ 0.146039] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
- [ 0.146540] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
- [ 0.146655] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
- [ 0.146793] pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x003a
- [ 0.146796] pci 0000:00:10.0: Performing full reset
- [ 0.147037] pci 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x0010
- [ 0.147040] pci 0000:00:10.1: Performing full reset
- [ 0.147263] pci 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x0010
- [ 0.147266] pci 0000:00:10.2: Performing full reset
- [ 0.147489] pci 0000:00:10.3: uhci_check_and_reset_hc: legsup = 0x0010
- [ 0.147492] pci 0000:00:10.3: Performing full reset
- [ 0.147856] pci 0000:01:00.0: Boot video device
- [ 0.147859] PCI: CLS 32 bytes, default 64
- [ 0.148449] microcode: AMD CPU family 0xf not supported
- [ 0.148568] Scanning for low memory corruption every 60 seconds
- [ 0.149419] audit: initializing netlink socket (disabled)
- [ 0.149555] type=2000 audit(1390749515.148:1): initialized
- [ 0.186460] bounce pool size: 64 pages
- [ 0.186583] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.191443] VFS: Disk quotas dquot_6.5.2
- [ 0.191671] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.193450] NFS: Registering the id_resolver key type
- [ 0.193585] Key type id_resolver registered
- [ 0.193695] Key type id_legacy registered
- [ 0.193816] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.194236] msgmni has been set to 1729
- [ 0.194497] SELinux: Registering netfilter hooks
- [ 0.195217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.195393] io scheduler noop registered
- [ 0.195503] io scheduler deadline registered
- [ 0.195769] io scheduler cfq registered (default)
- [ 0.196132] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.197594] nvidiafb: Device ID: 10de02e1
- [ 0.197709] nvidiafb: Subsystem ID: 10de0392
- [ 0.201014] nvidiafb: CRTC0 analog not found
- [ 0.205014] nvidiafb: CRTC1 analog not found
- [ 0.205132] nvidiafb: CRTC 0 is currently programmed for TV
- [ 0.205245] nvidiafb: Using TV on CRTC 0
- [ 0.205356] nvidiafb: Panel is TMDS
- [ 0.209330] nvidiafb: MTRR set to ON
- [ 0.209770] fbcon: NV2e (fb0) is primary device
- [ 0.332684] nvidiafb: Flat panel dithering disabled
- [ 0.334409] Console: switching to colour frame buffer device 80x30
- [ 0.337183] nvidiafb: PCI nVidia NV2e framebuffer (64MB @ 0xD0000000)
- [ 0.338142] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.339389] ACPI: Power Button [PWRB]
- [ 0.340139] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.341420] ACPI: Power Button [PWRF]
- [ 0.342646] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.363921] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 0.385830] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
- [ 0.388512] Non-volatile memory driver v1.3
- [ 0.389373] Linux agpgart interface v0.103
- [ 0.390159] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
- [ 0.393569] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
- [ 0.394603] [drm] Initialized drm 1.1.0 20060810
- [ 0.397270] loop: module loaded
- [ 0.398867] pata_via 0000:00:0f.0: version 0.3.4
- [ 0.399297] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
- [ 0.400176] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
- [ 0.402943] scsi0 : pata_via
- [ 0.404095] scsi1 : pata_via
- [ 0.405093] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
- [ 0.405990] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
- [ 0.407417] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 0.408333] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 0.409283] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 0.410167] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 0.411105] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 0.411977] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 0.412916] sky2: driver version 1.30
- [ 0.414032] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
- [ 0.415286] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
- [ 0.416149] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
- [ 0.417335] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e800, 00:14:85:20:1b:d4, IRQ 23
- [ 0.419652] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
- [ 0.421563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.422418] ehci_hcd: block sizes: qh 80 qtd 96 itd 160 sitd 96
- [ 0.422424] ehci-pci: EHCI PCI platform driver
- [ 0.423483] ehci-pci 0000:00:10.4: EHCI Host Controller
- [ 0.424457] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
- [ 0.426148] ehci-pci 0000:00:10.4: reset hcs_params 0x4208 dbg=0 cc=4 pcc=2 ordered !ppc ports=8
- [ 0.426153] ehci-pci 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024
- [ 0.426181] ehci-pci 0000:00:10.4: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 0.426189] ehci-pci 0000:00:10.4: MWI active
- [ 0.426193] ehci-pci 0000:00:10.4: supports USB remote wakeup
- [ 0.426238] ehci-pci 0000:00:10.4: irq 21, io mem 0xe8000000
- [ 0.427115] ehci-pci 0000:00:10.4: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 0.433014] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
- [ 0.433924] usb usb1: default language 0x0409
- [ 0.433940] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.433944] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.434807] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.436448] usb usb1: Product: EHCI Host Controller
- [ 0.437294] usb usb1: Manufacturer: Linux 3.13.0 ehci_hcd
- [ 0.438140] usb usb1: SerialNumber: 0000:00:10.4
- [ 0.439136] usb usb1: usb_probe_device
- [ 0.439141] usb usb1: configuration #1 chosen from 1 choice
- [ 0.439157] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.439224] hub 1-0:1.0: usb_probe_interface
- [ 0.439228] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.439231] hub 1-0:1.0: USB hub found
- [ 0.440094] hub 1-0:1.0: 8 ports detected
- [ 0.440915] hub 1-0:1.0: standalone hub
- [ 0.440918] hub 1-0:1.0: no power switching (usb 1.0)
- [ 0.440921] hub 1-0:1.0: individual port over-current protection
- [ 0.440925] hub 1-0:1.0: power on to power good time: 20ms
- [ 0.440935] hub 1-0:1.0: local power source is good
- [ 0.440987] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 0.441156] ehci-platform: EHCI generic platform driver
- [ 0.442055] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.443126] uhci_hcd 0000:00:10.0: UHCI Host Controller
- [ 0.444098] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
- [ 0.445750] uhci_hcd 0000:00:10.0: detected 2 ports
- [ 0.446604] uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.446607] uhci_hcd 0000:00:10.0: Performing full reset
- [ 0.446620] uhci_hcd 0000:00:10.0: supports USB remote wakeup
- [ 0.446635] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
- [ 0.447522] usb usb2: default language 0x0409
- [ 0.447538] usb usb2: udev 1, busnum 2, minor = 128
- [ 0.447542] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.448336] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.449828] usb usb2: Product: UHCI Host Controller
- [ 0.450593] usb usb2: Manufacturer: Linux 3.13.0 uhci_hcd
- [ 0.451356] usb usb2: SerialNumber: 0000:00:10.0
- [ 0.452246] usb usb2: usb_probe_device
- [ 0.452251] usb usb2: configuration #1 chosen from 1 choice
- [ 0.452266] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 0.452331] hub 2-0:1.0: usb_probe_interface
- [ 0.452335] hub 2-0:1.0: usb_probe_interface - got id
- [ 0.452338] hub 2-0:1.0: USB hub found
- [ 0.453085] hub 2-0:1.0: 2 ports detected
- [ 0.453772] hub 2-0:1.0: standalone hub
- [ 0.453775] hub 2-0:1.0: no power switching (usb 1.0)
- [ 0.453778] hub 2-0:1.0: individual port over-current protection
- [ 0.453781] hub 2-0:1.0: power on to power good time: 2ms
- [ 0.453792] hub 2-0:1.0: local power source is good
- [ 0.453810] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 0.453864] uhci_hcd 0000:00:10.0: FS/LS companion for 0000:00:10.4
- [ 0.454087] uhci_hcd 0000:00:10.1: UHCI Host Controller
- [ 0.454925] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
- [ 0.456376] uhci_hcd 0000:00:10.1: detected 2 ports
- [ 0.457112] uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.457115] uhci_hcd 0000:00:10.1: Performing full reset
- [ 0.457128] uhci_hcd 0000:00:10.1: supports USB remote wakeup
- [ 0.457151] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
- [ 0.457916] usb usb3: default language 0x0409
- [ 0.457931] usb usb3: udev 1, busnum 3, minor = 256
- [ 0.457935] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.458662] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.460076] usb usb3: Product: UHCI Host Controller
- [ 0.460816] usb usb3: Manufacturer: Linux 3.13.0 uhci_hcd
- [ 0.461557] usb usb3: SerialNumber: 0000:00:10.1
- [ 0.462424] usb usb3: usb_probe_device
- [ 0.462429] usb usb3: configuration #1 chosen from 1 choice
- [ 0.462444] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 0.462510] hub 3-0:1.0: usb_probe_interface
- [ 0.462514] hub 3-0:1.0: usb_probe_interface - got id
- [ 0.462517] hub 3-0:1.0: USB hub found
- [ 0.463271] hub 3-0:1.0: 2 ports detected
- [ 0.463984] hub 3-0:1.0: standalone hub
- [ 0.463987] hub 3-0:1.0: no power switching (usb 1.0)
- [ 0.463990] hub 3-0:1.0: individual port over-current protection
- [ 0.463993] hub 3-0:1.0: power on to power good time: 2ms
- [ 0.464017] hub 3-0:1.0: local power source is good
- [ 0.464035] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 0.464086] uhci_hcd 0000:00:10.1: FS/LS companion for 0000:00:10.4
- [ 0.464282] uhci_hcd 0000:00:10.2: UHCI Host Controller
- [ 0.465133] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
- [ 0.466534] uhci_hcd 0000:00:10.2: detected 2 ports
- [ 0.467279] uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.467282] uhci_hcd 0000:00:10.2: Performing full reset
- [ 0.467294] uhci_hcd 0000:00:10.2: supports USB remote wakeup
- [ 0.467318] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
- [ 0.468132] usb usb4: default language 0x0409
- [ 0.468148] usb usb4: udev 1, busnum 4, minor = 384
- [ 0.468151] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.468864] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.470256] usb usb4: Product: UHCI Host Controller
- [ 0.470981] usb usb4: Manufacturer: Linux 3.13.0 uhci_hcd
- [ 0.471708] usb usb4: SerialNumber: 0000:00:10.2
- [ 0.472575] usb usb4: usb_probe_device
- [ 0.472580] usb usb4: configuration #1 chosen from 1 choice
- [ 0.472594] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 0.472666] hub 4-0:1.0: usb_probe_interface
- [ 0.472670] hub 4-0:1.0: usb_probe_interface - got id
- [ 0.472673] hub 4-0:1.0: USB hub found
- [ 0.473431] hub 4-0:1.0: 2 ports detected
- [ 0.474152] hub 4-0:1.0: standalone hub
- [ 0.474155] hub 4-0:1.0: no power switching (usb 1.0)
- [ 0.474158] hub 4-0:1.0: individual port over-current protection
- [ 0.474161] hub 4-0:1.0: power on to power good time: 2ms
- [ 0.474172] hub 4-0:1.0: local power source is good
- [ 0.474190] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 0.474241] uhci_hcd 0000:00:10.2: FS/LS companion for 0000:00:10.4
- [ 0.474439] uhci_hcd 0000:00:10.3: UHCI Host Controller
- [ 0.475293] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
- [ 0.476698] uhci_hcd 0000:00:10.3: detected 2 ports
- [ 0.477443] uhci_hcd 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000
- [ 0.477446] uhci_hcd 0000:00:10.3: Performing full reset
- [ 0.477458] uhci_hcd 0000:00:10.3: supports USB remote wakeup
- [ 0.477482] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e000
- [ 0.478286] usb usb5: default language 0x0409
- [ 0.478302] usb usb5: udev 1, busnum 5, minor = 512
- [ 0.478305] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.479026] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.480417] usb usb5: Product: UHCI Host Controller
- [ 0.481144] usb usb5: Manufacturer: Linux 3.13.0 uhci_hcd
- [ 0.481858] usb usb5: SerialNumber: 0000:00:10.3
- [ 0.482724] usb usb5: usb_probe_device
- [ 0.482729] usb usb5: configuration #1 chosen from 1 choice
- [ 0.482744] usb usb5: adding 5-0:1.0 (config #1, interface 0)
- [ 0.482811] hub 5-0:1.0: usb_probe_interface
- [ 0.482814] hub 5-0:1.0: usb_probe_interface - got id
- [ 0.482818] hub 5-0:1.0: USB hub found
- [ 0.483573] hub 5-0:1.0: 2 ports detected
- [ 0.484297] hub 5-0:1.0: standalone hub
- [ 0.484300] hub 5-0:1.0: no power switching (usb 1.0)
- [ 0.484303] hub 5-0:1.0: individual port over-current protection
- [ 0.484306] hub 5-0:1.0: power on to power good time: 2ms
- [ 0.484317] hub 5-0:1.0: local power source is good
- [ 0.484334] hub 5-0:1.0: trying to enable port power on non-switchable hub
- [ 0.484391] uhci_hcd 0000:00:10.3: FS/LS companion for 0000:00:10.4
- [ 0.484552] usbcore: registered new interface driver usb-storage
- [ 0.485410] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
- [ 0.486119] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
- [ 0.487411] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.488165] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.489067] kworker/u2:2 (834) used greatest stack depth: 6948 bytes left
- [ 0.489957] mousedev: PS/2 mouse device common for all mice
- [ 0.491082] rtc_cmos 00:04: RTC can wake from S4
- [ 0.492096] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 0.492878] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram
- [ 0.494078] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
- [ 0.495713] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.497588] usbcore: registered new interface driver usbhid
- [ 0.498378] usbhid: USB HID core driver
- [ 0.500229] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
- [ 0.501001] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
- [ 0.541041] ehci-pci 0000:00:10.4: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 0.541050] hub 1-0:1.0: port 2: status 0501 change 0001
- [ 0.541082] ehci-pci 0000:00:10.4: GetStatus port:7 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 0.541090] hub 1-0:1.0: port 7: status 0501 change 0001
- [ 0.553019] uhci_hcd 0000:00:10.0: port 1 portsc 008a,00
- [ 0.553041] uhci_hcd 0000:00:10.0: port 2 portsc 009a,00
- [ 0.564335] uhci_hcd 0000:00:10.1: port 1 portsc 008a,00
- [ 0.564419] uhci_hcd 0000:00:10.1: port 2 portsc 008a,00
- [ 0.564475] ata1.00: HPA detected: current 156299375, native 156301488
- [ 0.565261] ata1.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
- [ 0.566008] ata1.00: 156299375 sectors, multi 16: LBA
- [ 0.567652] ata1.01: HPA detected: current 39100223, native 39102336
- [ 0.568394] ata1.01: ATA-5: WDC WD200BB-60BNA1, 18.20D18, max UDMA/100
- [ 0.569138] ata1.01: 39100223 sectors, multi 16: LBA
- [ 0.569874] ata1.00: limited to UDMA/33 due to 40-wire cable
- [ 0.570632] ata1.01: limited to UDMA/33 due to 40-wire cable
- [ 0.574209] uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
- [ 0.574231] uhci_hcd 0000:00:10.2: port 2 portsc 008a,00
- [ 0.574366] ata1.00: configured for UDMA/33
- [ 0.582133] ata1.01: configured for UDMA/33
- [ 0.582989] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
- [ 0.584394] uhci_hcd 0000:00:10.3: port 1 portsc 01aa,00
- [ 0.584416] uhci_hcd 0000:00:10.3: port 2 portsc 008a,00
- [ 0.584785] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 0.586335] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.587126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.587166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.589319] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.607365] scsi 0:0:1:0: Direct-Access ATA WDC WD200BB-60BN 18.2 PQ: 0 ANSI: 5
- [ 0.609849] sd 0:0:1:0: Attached scsi generic sg1 type 0
- [ 0.620163] sd 0:0:1:0: [sdb] 39100223 512-byte logical blocks: (20.0 GB/18.6 GiB)
- [ 0.622504] sd 0:0:1:0: [sdb] Write Protect is off
- [ 0.623353] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.628774] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.641027] hub 1-0:1.0: state 7 ports 8 chg 0084 evt 0000
- [ 0.641048] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
- [ 0.651807] sda: sda1 sda2 < sda5 sda6 sda7 >
- [ 0.679242] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 0.680606] sdb: sdb1 sdb2 sdb3
- [ 0.681596] sdb: p3 size 25786368 extends beyond EOD, enabling native capacity
- [ 0.683455] ata1: soft resetting link
- [ 0.692284] ehci-pci 0000:00:10.4: port 2 reset complete, port enabled
- [ 0.692292] ehci-pci 0000:00:10.4: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.743023] usb 1-2: new high-speed USB device number 2 using ehci-pci
- [ 0.771231] ata2.00: ATA-5: WDC WD400JB-00ENA0, 05.03E05, max UDMA/100
- [ 0.772213] ata2.00: 78165360 sectors, multi 16: LBA
- [ 0.773344] ata2.01: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
- [ 0.774295] ata2.01: 160836480 sectors, multi 16: LBA48
- [ 0.782101] ata2.00: configured for UDMA/100
- [ 0.792375] ata2.01: configured for UDMA/133
- [ 0.793374] scsi 1:0:0:0: Direct-Access ATA WDC WD400JB-00EN 05.0 PQ: 0 ANSI: 5
- [ 0.795435] sd 1:0:0:0: [sdc] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
- [ 0.797254] sd 1:0:0:0: [sdc] Write Protect is off
- [ 0.798137] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 0.798163] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.800435] sd 1:0:0:0: Attached scsi generic sg2 type 0
- [ 0.805304] ehci-pci 0000:00:10.4: port 2 reset complete, port enabled
- [ 0.805313] ehci-pci 0000:00:10.4: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 0.814042] sdc: sdc1
- [ 0.815017] scsi 1:0:1:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
- [ 0.817272] sd 1:0:0:0: [sdc] Attached SCSI disk
- [ 0.818374] sd 1:0:1:0: [sdd] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB)
- [ 0.820244] sd 1:0:1:0: [sdd] Write Protect is off
- [ 0.821173] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
- [ 0.821199] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.823194] sd 1:0:1:0: Attached scsi generic sg3 type 0
- [ 0.833800] sdd: sdd1
- [ 0.835391] sd 1:0:1:0: [sdd] Attached SCSI disk
- [ 0.860011] ehci-pci 0000:00:10.4: Waited too long for the async schedule status (0/8000), giving up
- [ 0.860363] ata1.01: n_sectors mismatch 39100223 != 39102336
- [ 0.861301] ata1.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
- [ 0.869341] ata1.00: configured for UDMA/33
- [ 0.877188] ata1.01: configured for UDMA/33
- [ 0.878138] ata1: EH complete
- [ 0.879357] sda: detected capacity change from 0 to 80025280000
- [ 0.880322] sd 0:0:1:0: [sdb] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
- [ 0.882462] sdb: detected capacity change from 20019314176 to 20020396032
- [ 0.883434] usb 1-2: default language 0x0409
- [ 0.883825] usb 1-2: udev 2, busnum 1, minor = 1
- [ 0.883829] usb 1-2: New USB device found, idVendor=0846, idProduct=9030
- [ 0.884740] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
- [ 0.886484] usb 1-2: Product: WNA1100
- [ 0.887365] usb 1-2: Manufacturer: NETGEAR WNA
- [ 0.888213] usb 1-2: SerialNumber: 12345
- [ 0.889220] usb 1-2: usb_probe_device
- [ 0.889225] usb 1-2: configuration #1 chosen from 1 choice
- [ 0.889456] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
- [ 0.889612] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
- [ 0.889624] ehci-pci 0000:00:10.4: port 7 low speed --> companion
- [ 0.912445] sdb: sdb1 sdb2 sdb3
- [ 0.913556] sda: detected capacity change from 0 to 80025280000
- [ 0.914885] sd 0:0:1:0: [sdb] Attached SCSI disk
- [ 0.940026] ehci-pci 0000:00:10.4: GetStatus port:7 status 003402 0 ACK POWER OWNER sig=k CSC
- [ 0.940067] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 0.940072] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 0.940076] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 0.940080] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 0.940084] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0080
- [ 0.940091] ehci-pci 0000:00:10.4: GetStatus port:7 status 003402 0 ACK POWER OWNER sig=k CSC
- [ 0.940104] hub 1-0:1.0: port 7, status 0100, change 0001, 12 Mb/s
- [ 0.951710] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
- [ 1.017069] Netfilter messages via NETLINK v0.30.
- [ 1.017914] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 1.019095] ctnetlink v0.93: registering with nfnetlink.
- [ 1.020029] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.020859] TCP: cubic registered
- [ 1.021644] Initializing XFRM netlink socket
- [ 1.022786] NET: Registered protocol family 10
- [ 1.023914] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.024758] sit: IPv6 over IPv4 tunneling driver
- [ 1.025912] NET: Registered protocol family 17
- [ 1.026746] Key type dns_resolver registered
- [ 1.027814] Using IPI No-Shortcut mode
- [ 1.028796] registered taskstats version 1
- [ 1.029807] Magic number: 14:783:336
- [ 1.030563] tty tty57: hash matches
- [ 1.031283] console [netcon0] enabled
- [ 1.031908] netconsole: network logging started
- [ 1.032580] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20131115/processor_perflib-349)
- [ 1.033975] PM: Hibernation image not present or could not be loaded.
- [ 1.033978] ALSA device list:
- [ 1.034641] #0: VIA 8237 with ALC655 at 0xe400, irq 22
- [ 1.044034] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x100
- [ 1.044040] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
- [ 1.044048] uhci_hcd 0000:00:10.3: port 1 portsc 01a3,00
- [ 1.044063] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
- [ 1.148019] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
- [ 1.150016] tsc: Refined TSC clocksource calibration: 1607.390 MHz
- [ 1.250021] usb 5-1: new low-speed USB device number 2 using uhci_hcd
- [ 1.395308] usb 5-1: skipped 1 descriptor after interface
- [ 1.395313] usb 5-1: skipped 1 descriptor after interface
- [ 1.400305] usb 5-1: default language 0x0409
- [ 1.414307] usb 5-1: udev 2, busnum 5, minor = 513
- [ 1.414311] usb 5-1: New USB device found, idVendor=0a81, idProduct=0101
- [ 1.414924] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.415532] usb 5-1: Product: USB Keyboard
- [ 1.416129] usb 5-1: Manufacturer: CHESEN
- [ 1.416884] usb 5-1: usb_probe_device
- [ 1.416890] usb 5-1: configuration #1 chosen from 1 choice
- [ 1.419322] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
- [ 1.419392] usbhid 5-1:1.0: usb_probe_interface
- [ 1.419396] usbhid 5-1:1.0: usb_probe_interface - got id
- [ 1.435691] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.0/input/input5
- [ 1.436940] uhci_hcd 0000:00:10.3: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
- [ 1.437184] hid-generic 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:10.3-1/input0
- [ 1.438519] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
- [ 1.438611] usbhid 5-1:1.1: usb_probe_interface
- [ 1.438616] usbhid 5-1:1.1: usb_probe_interface - got id
- [ 1.466426] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.1/input/input6
- [ 1.467774] uhci_hcd 0000:00:10.3: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
- [ 1.467965] hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:10.3-1/input1
- [ 1.497895] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
- [ 1.509745] EXT3-fs (sda7): error: couldn't mount because of unsupported optional features (240)
- [ 1.511569] EXT2-fs (sda7): error: couldn't mount because of unsupported optional features (244)
- [ 1.514013] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
- [ 1.514889] EXT4-fs (sda7): write access will be enabled during recovery
- [ 1.704025] usb usb2: suspend_rh (auto-stop)
- [ 1.704049] usb usb3: suspend_rh (auto-stop)
- [ 1.704066] usb usb4: suspend_rh (auto-stop)
- [ 1.832498] EXT4-fs (sda7): recovery complete
- [ 1.840164] random: nonblocking pool is initialized
- [ 1.841344] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.843115] VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
- [ 1.846979] devtmpfs: mounted
- [ 1.848508] Freeing unused kernel memory: 556K (c1ab8000 - c1b43000)
- [ 1.849608] Write protecting the kernel text: 7880k
- [ 1.850625] Write protecting the kernel read-only data: 2520k
- [ 2.150081] Switched to clocksource tsc
- [ 2.329635] stty (980) used greatest stack depth: 6372 bytes left
- [ 2.667897] hostname (999) used greatest stack depth: 6284 bytes left
- [ 2.893177] ip (1038) used greatest stack depth: 6100 bytes left
- [ 2.896582] ip (1039) used greatest stack depth: 5736 bytes left
- [ 3.066326] systemd-udevd[1070]: starting version 197
- [ 3.650873] Loading modules backported from Linux version v3.13-0-gd8ec26d
- [ 3.651799] Backport generated by backports.git v3.13-1-0-ga4b53c3
- [ 3.685299] cfg80211: Calling CRDA to update world regulatory domain
- [ 4.091732] ath9k_htc: Unknown symbol __ieee80211_create_tpt_led_trigger (err 0)
- [ 4.093654] ath9k_htc: Unknown symbol ieee80211_rx (err 0)
- [ 4.102878] ath9k_htc: Unknown symbol __ieee80211_create_tpt_led_trigger (err 0)
- [ 4.105632] ath9k_htc: Unknown symbol ieee80211_rx (err 0)
- [ 6.045911] Adding 1535996k swap on /dev/sdb2. Priority:1 extents:1 across:1535996k
- [ 6.091425] EXT4-fs (sda7): re-mounted. Opts: (null)
- [ 6.417900] EXT4-fs (sda7): re-mounted. Opts: (null)
- [ 6.553296] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.788258] ip (1444) used greatest stack depth: 5604 bytes left
- [ 86.212804] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
- [ 702.391207] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- root [ ~ ]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement