Advertisement
codekipper

Pine64 netboot not working with my kernel

Dec 1st, 2016
174
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.01 KB | None | 0 0
  1. The Bad
  2. HELLO! BOOT0 is starting!
  3. boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f
  4.  
  5. boot0 version : 4.0.0
  6. set pll start
  7. set pll end
  8. rtc[0] value = 0x00000000
  9. rtc[1] value = 0x00000000
  10. rtc[2] value = 0x00000000
  11. rtc[3] value = 0x00000000
  12. rtc[4] value = 0x00000000
  13. rtc[5] value = 0x00000000
  14. DRAM driver version: V1.1
  15. rsb_send_initseq: rsb clk 400Khz -> 3Mhz
  16. PMU: AXP81X
  17. ddr voltage = 1500 mv
  18. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  19. DRAM clk = 672 MHz
  20. DRAM zq value: 003b3bbb
  21. DRAM single rank full DQ OK
  22. DRAM size = 1024 MB
  23. DRAM init ok
  24. dram size =1024
  25. card boot number = 0, boot0 copy = 0
  26. card no is 0
  27. sdcard 0 line count 4
  28. [mmc]: mmc driver ver 2015-05-08 20:06
  29. [mmc]: sdc0 spd mode error, 2
  30. [mmc]: Wrong media type 0x00000000
  31. [mmc]: ***Try SD card 0***
  32. [mmc]: HSSDR52/SDR25 4 bit
  33. [mmc]: 50000000 Hz
  34. [mmc]: 14980 MB
  35. [mmc]: ***SD/MMC 0 init OK!!!***
  36. sdcard 0 init ok
  37. The size of uboot is 00070000.
  38. sum=ba880801
  39. src_sum=ba880801
  40. Succeed in loading uboot from sdmmc flash.
  41. boot0: start load other image
  42. boot0: Loading BL3-1
  43. Loading file 0 at address 0x40000000,size 0x00000200 success
  44. boot0: Loading scp
  45. Loading file 2 at address 0x00040000,size 0x0000c200 success
  46. set arisc reset to de-assert state
  47. Ready to disable icache.
  48. Jump to secend Boot.
  49. NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000)
  50. NOTICE: Configuring SPC Controller
  51. NOTICE: BL3-1: v1.0(debug):cd7fa48
  52. NOTICE: BL3-1: Built : 11:59:28, Nov 28 2016
  53. NOTICE: Configuring AXP PMIC
  54. NOTICE: PMIC: already configured for RSB
  55. NOTICE: PMIC: setup successful
  56. INFO: BL3-1: Initializing runtime services
  57. INFO: BL3-1: Preparing for EL3 exit to normal world
  58. INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9
  59.  
  60.  
  61. U-Boot 2016.11-00099-g193b327 (Nov 28 2016 - 12:13:46 +0100) Allwinner Technology
  62.  
  63. CPU: Allwinner A64 (SUN50I)
  64. Model: Pine64+
  65. DRAM: 1 GiB
  66. MMC: SUNXI SD/MMC: 0
  67. *** Warning - bad CRC, using default environment
  68.  
  69. In: serial
  70. Out: serial
  71. Err: serial
  72. Net: phy interface7
  73. eth0: ethernet@01c30000
  74. starting USB...
  75. USB0: USB EHCI 1.00
  76. USB1: USB OHCI 1.0
  77. scanning bus 0 for devices... 1 USB Device(s) found
  78. Hit any key to stop autoboot: 2  1  0
  79. switch to partitions #0, OK
  80. mmc0 is current device
  81. Scanning mmc 0:1...
  82. Found U-Boot script /boot.scr
  83. reading /boot.scr
  84. 563 bytes read in 20 ms (27.3 KiB/s)
  85. ## Executing script at 4fc00000
  86. BOOTP broadcast 1
  87. BOOTP broadcast 2
  88. BOOTP broadcast 3
  89. BOOTP broadcast 4
  90. BOOTP broadcast 5
  91. DHCP client bound to address 192.168.0.130 (3762 ms)
  92. Using ethernet@01c30000 device
  93. TFTP from server 192.168.0.199; our IP address is 192.168.0.130
  94. Filename 'Image'.
  95. Load address: 0x40080000
  96. Loading: *#################################################################
  97. #################################################################
  98. #################################################################
  99. #################################################################
  100. #################################################################
  101. #################################################################
  102. #################################################################
  103. #################################################################
  104. #################################################################
  105. #################################################################
  106. #################################################################
  107. #################################################################
  108. #################################################################
  109. #################################################################
  110. #################################################################
  111. #############
  112. 10.1 MiB/s
  113. done
  114. Bytes transferred = 14502400 (dd4a00 hex)
  115. Using ethernet@01c30000 device
  116. TFTP from server 192.168.0.199; our IP address is 192.168.0.130
  117. Filename 'sun50i-a64-pine64-plus.dtb'.
  118. Load address: 0x4fa00000
  119. Loading: *#
  120. 4.3 MiB/s
  121. done
  122. Bytes transferred = 9011 (2333 hex)
  123. ## Flattened Device Tree blob at 4fa00000
  124. Booting using the fdt blob at 0x4fa00000
  125. Loading Device Tree to 0000000049ffa000, end 0000000049fff332 ... OK
  126.  
  127. Starting kernel ...
  128.  
  129. [ 0.000000] Booting Linux on physical CPU 0x0
  130. [ 0.000000] Linux version 4.9.0-rc6-00533-g7f50418 (marcus@coopshtpc) (gcc version 6.1.1 20160505 (GCC) ) #118 SMP PREEMPT Wed Nov 30 17:56:23 CET 2016
  131. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  132. [ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '')
  133. [ 0.000000] bootconsole [uart0] enabled
  134. [ 0.000000] efi: Getting EFI parameters from FDT:
  135. [ 0.000000] efi: UEFI not found.
  136. [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
  137. [ 0.000000] psci: probing for conduit method from DT.
  138. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  139. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  140. [ 0.000000] psci: Trusted OS migration not required
  141. [ 0.000000] percpu: Embedded 21 pages/cpu @ffff80003ef90000 s47896 r8192 d29928 u86016
  142. [ 0.000000] Detected VIPT I-cache on CPU0
  143. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  144. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048
  145. [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart,mmio32,0x1c28000 root=/dev/mmcblk0p2 rootwait
  146. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  147. [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  148. [ 0.000000] log_buf_len min size: 16384 bytes
  149. [ 0.000000] log_buf_len: 32768 bytes
  150. [ 0.000000] early log buf free: 14680(89%)
  151. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  152. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  153. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  154. [ 0.000000] Memory: 999288K/1048576K available (8444K kernel code, 914K rwdata, 3708K rodata, 1024K init, 280K bss, 32904K reserved, 16384K cma-reserved)
  155. [ 0.000000] Virtual kernel memory layout:
  156. [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  157. [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
  158. [ 0.000000] .text : 0xffff000008080000 - 0xffff0000088c0000 ( 8448 KB)
  159. [ 0.000000] .rodata : 0xffff0000088c0000 - 0xffff000008c70000 ( 3776 KB)
  160. [ 0.000000] .init : 0xffff000008c70000 - 0xffff000008d70000 ( 1024 KB)
  161. [ 0.000000] .data : 0xffff000008d70000 - 0xffff000008e54a00 ( 915 KB)
  162. [ 0.000000] .bss : 0xffff000008e54a00 - 0xffff000008e9ac3c ( 281 KB)
  163. [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
  164. [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
  165. [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
  166. [ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 MB actual)
  167. [ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 MB)
  168. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  169. [ 0.000000] Preemptible hierarchical RCU implementation.
  170. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  171. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  172. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  173. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  174. [ 0.000000] GIC: Using split EOI/Deactivate mode
  175. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
  176. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  177. [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  178. [ 0.008252] Console: colour dummy device 80x25
  179. [ 0.012715] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  180. [ 0.022977] pid_max: default: 32768 minimum: 301
  181. [ 0.027657] Security Framework initialized
  182. [ 0.031793] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  183. [ 0.038491] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  184. [ 0.046492] ASID allocator initialised with 65536 entries
  185. [ 0.084355] EFI services will not be available.
  186. [ 0.130214] Detected VIPT I-cache on CPU1
  187. [ 0.130264] CPU1: Booted secondary processor [410fd034]
  188. [ 0.161632] Detected VIPT I-cache on CPU2
  189. [ 0.161662] CPU2: Booted secondary processor [410fd034]
  190. [ 0.193659] Detected VIPT I-cache on CPU3
  191. [ 0.193687] CPU3: Booted secondary processor [410fd034]
  192. [ 0.193746] Brought up 4 CPUs
  193. [ 0.224366] SMP: Total of 4 processors activated.
  194. [ 0.229069] CPU features: detected feature: 32-bit EL0 Support
  195. [ 0.234939] CPU: All CPU(s) started at EL2
  196. [ 0.239050] alternatives: patching kernel code
  197. [ 0.244356] devtmpfs: initialized
  198. [ 0.250290] DMI not present or invalid.
  199. [ 0.254348] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  200. [ 0.264638] pinctrl core: initialized pinctrl subsystem
  201. [ 0.271075] NET: Registered protocol family 16
  202. [ 0.295612] cpuidle: using governor menu
  203. [ 0.299848] vdso: 2 pages (1 code @ ffff0000088c7000, 1 data @ ffff000008d74000)
  204. [ 0.307254] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  205. [ 0.314868] DMA: preallocated 256 KiB pool for atomic allocations
  206. [ 0.321263] Serial: AMBA PL011 UART driver
  207. [ 0.358002] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  208. [ 0.365259] ACPI: Interpreter disabled.
  209. [ 0.369989] vgaarb: loaded
  210. [ 0.372980] SCSI subsystem initialized
  211. [ 0.377484] usbcore: registered new interface driver usbfs
  212. [ 0.383071] usbcore: registered new interface driver hub
  213. [ 0.388490] usbcore: registered new device driver usb
  214. [ 0.394166] pps_core: LinuxPPS API ver. 1 registered
  215. [ 0.399136] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  216. [ 0.408320] PTP clock support registered
  217. [ 0.412582] dmi: Firmware registration failed.
  218. [ 0.417258] Advanced Linux Sound Architecture Driver Initialized.
  219. [ 0.424272] clocksource: Switched to clocksource arch_sys_counter
  220. [ 0.430516] VFS: Disk quotas dquot_6.6.0
  221. [ 0.434494] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  222. [ 0.441690] pnp: PnP ACPI: disabled
  223. [ 0.455707] NET: Registered protocol family 2
  224. [ 0.460637] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  225. [ 0.467765] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  226. [ 0.474464] TCP: Hash tables configured (established 8192 bind 8192)
  227. [ 0.480897] UDP hash table entries: 512 (order: 2, 16384 bytes)
  228. [ 0.486845] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  229. [ 0.493359] NET: Registered protocol family 1
  230. [ 0.498086] RPC: Registered named UNIX socket transport module.
  231. [ 0.504013] RPC: Registered udp transport module.
  232. [ 0.508729] RPC: Registered tcp transport module.
  233. [ 0.513433] RPC: Registered tcp NFSv4.1 backchannel transport module.
  234. [ 0.520502] kvm [1]: 8-bit VMID
  235. [ 0.523639] kvm [1]: IDMAP page: 408a8000
  236. [ 0.527655] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  237. [ 0.534034] kvm [1]: Hyp mode initialized successfully
  238. [ 0.539211] kvm [1]: vgic-v2@1c84000
  239. [ 0.542890] kvm [1]: vgic interrupt IRQ1
  240. [ 0.546840] kvm [1]: virtual timer IRQ4
  241. [ 0.552728] futex hash table entries: 1024 (order: 5, 131072 bytes)
  242. [ 0.559103] audit: initializing netlink subsys (disabled)
  243. [ 0.564564] audit: type=2000 audit(0.480:1): initialized
  244. [ 0.570312] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  245. [ 0.587254] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  246. [ 0.593979] NFS: Registering the id_resolver key type
  247. [ 0.599059] Key type id_resolver registered
  248. [ 0.603263] Key type id_legacy registered
  249. [ 0.607287] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  250. [ 0.614185] 9p: Installing v9fs 9p2000 file system support
  251. [ 0.622330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  252. [ 0.629749] io scheduler noop registered
  253. [ 0.633829] io scheduler cfq registered (default)
  254. [ 0.639374] libphy: mdio_driver_register: phy-bcm-ns2-pci
  255. [ 0.651040] xenfs: not registering filesystem on non-xen platform
  256. [ 0.660900] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  257. [ 0.668539] dw-apb-uart 1c28000.serial: could not find pctldev for node /soc/pinctrl@1c20800/uart0@0, deferring probe
  258. [ 0.679548] SuperH (H)SCI(F) driver initialized
  259. [ 0.684360] msm_serial: driver initialized
  260. [ 0.688841] Unable to detect cache hierarchy from DT for CPU 0
  261. [ 0.699878] loop: module loaded
  262. [ 0.703675] hisi_sas: driver version v1.6
  263. [ 0.710082] libphy: Fixed MDIO Bus: probed
  264. [ 0.714999] tun: Universal TUN/TAP device driver, 1.6
  265. [ 0.720057] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  266. [ 0.726619] sun8i-emac 1c30000.ethernet: could not find pctldev for node /soc/pinctrl@1c20800/emac0@1, deferring probe
  267. [ 0.738154] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  268. [ 0.743990] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  269. [ 0.750014] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  270. [ 0.756976] igb: Copyright (c) 2007-2014 Intel Corporation.
  271. [ 0.762636] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  272. [ 0.770462] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  273. [ 0.776467] sky2: driver version 1.30
  274. [ 0.780789] VFIO - User Level meta-driver version: 0.3
  275. [ 0.787468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  276. [ 0.794003] ehci-pci: EHCI PCI platform driver
  277. [ 0.798532] ehci-platform: EHCI generic platform driver
  278. [ 0.803876] ehci-exynos: EHCI EXYNOS driver
  279. [ 0.808165] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  280. [ 0.813833] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  281. [ 0.820035] ohci-pci: OHCI PCI platform driver
  282. [ 0.824561] ohci-platform: OHCI generic platform driver
  283. [ 0.829890] ohci-exynos: OHCI EXYNOS driver
  284. [ 0.834595] usbcore: registered new interface driver usb-storage
  285. [ 0.841829] mousedev: PS/2 mouse device common for all mice
  286. [ 0.848862] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  287. [ 0.855656] sun6i-rtc 1f00000.rtc: RTC enabled
  288. [ 0.860430] i2c /dev entries driver
  289. [ 0.864343] mv64xxx_i2c 1c2b000.i2c: could not find pctldev for node /soc/pinctrl@1c20800/i2c1_pins, deferring probe
  290. [ 0.877087] sdhci: Secure Digital Host Controller Interface driver
  291. [ 0.883272] sdhci: Copyright(c) Pierre Ossman
  292. [ 0.887947] Synopsys Designware Multimedia Card Interface Driver
  293. [ 0.894361] sunxi-mmc 1c0f000.mmc: could not find pctldev for node /soc/pinctrl@1c20800/mmc0@0, deferring probe
  294. [ 0.904535] sdhci-pltfm: SDHCI platform and OF driver helper
  295. [ 0.910902] ledtrig-cpu: registered to indicate activity on CPUs
  296. [ 0.918227] usbcore: registered new interface driver usbhid
  297. [ 0.923806] usbhid: USB HID core driver
  298. [ 0.929904] sun4i-i2s 1c22000.i2s: could not find pctldev for node /soc/pinctrl@1c20800/i2s0@1, deferring probe
  299. [ 0.940146] sun4i-spdif 1c21000.spdif: could not find pctldev for node /soc/pinctrl@1c20800/spdif@0, deferring probe
  300. [ 0.950966] NET: Registered protocol family 17
  301. [ 0.955507] 9pnet: Installing 9P2000 support
  302. [ 0.959879] Key type dns_resolver registered
  303. [ 0.964930] registered taskstats version 1
  304. [ 0.976837] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  305. [ 0.984678] console [ttyS0] disabled
  306. [ 1.007521] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 9, base_baud = 1500000) is a U6_16550A
  307. [ 1.016410] console [ttyS0] enabled
  308. [ 1.016410] console [ttyS0] enabled
  309. [ 1.023382] bootconsole [uart0] disabled
  310. [ 1.023382] bootconsole [uart0] disabled
  311. [ 1.035053] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  312. [ 1.076299] sunxi-mmc 1c0f000.mmc: base:0xffff00000805b000 irq:12
  313. [ 1.085430] sun4i-i2s 1c22000.i2s: Missing dma channel for stream: 0
  314. [ 1.091817] sun4i-i2s 1c22000.i2s: ASoC: pcm constructor failed: -22
  315. [ 1.098176] asoc-simple-card sound-i2s: ASoC: can't create pcm 1c22000.i2s-pcm5102a-hifi :-22
  316. [ 1.106699] asoc-simple-card sound-i2s: ASoC: failed to instantiate card -22
  317. [ 1.113936] asoc-simple-card: probe of sound-i2s failed with error -22
  318. [ 1.121155] sun4i-spdif 1c21000.spdif: Missing dma channel for stream: 0
  319. [ 1.127866] sun4i-spdif 1c21000.spdif: ASoC: pcm constructor failed: -22
  320. [ 1.134574] asoc-simple-card sound-spdif: ASoC: can't create pcm spdif-dit-hifi :-22
  321. [ 1.142328] asoc-simple-card sound-spdif: ASoC: failed to instantiate card -22
  322. [ 1.149698] asoc-simple-card: probe of sound-spdif failed with error -22
  323. [ 1.156653] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:44 UTC (44)
  324. [ 1.164848] ALSA device list:
  325. [ 1.167811] No soundcards found.
  326. [ 1.171501] Waiting for root device /dev/mmcblk0p2...
  327. [ 2.808271] sunxi-mmc 1c0f000.mmc: fatal err update clk timeout
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement