API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Nov 13th, 2017
450
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 87.22 KB | None | 0 0
raw download clone embed print report
  1. # [ 0.000000] MTRR variable ranges enabled:
  2. ] a-sh: missing ]
  3. Lakka:~ # [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
  4. -sh: missing ]
  5. Lakka:~ # [ 0.000000] 1 disabled
  6. -sh: missing ]
  7. Lakka:~ # [ 0.000000] 2 disabled
  8. ine-sh: missing ]
  9. Lakka:~ # [ 0.000000] 3 disabled
  10. -sh: missing ]
  11. Lakka:~ # [ 0.000000] 4 disabled
  12. max_-sh: missing ]
  13. Lakka:~ # [ 0.000000] 5 disabled
  14. -sh: missing ]
  15. Lakka:~ # [ 0.000000] 6 disabled
  16. ercpu-sh: missing ]
  17. Lakka:~ # [ 0.000000] 7 disabled
  18. -sh: missing ]
  19. Lakka:~ # [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC U
  20. C- WT
  21. u -sh: missing ]
  22. Lakka:~ # [ 0.000000] found SMP MP-table at [mem 0x000f3bc0-0x000f3bcf] mappe
  23. d at [ffff8800000f3bc0]
  24. 20 u-sh: missing ]
  25. Lakka:~ # [ 0.000000] Scanning 1 areas for low memory corruption
  26. -sh: missing ]
  27. Lakka:~ # [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size
  28. 24576
  29. -sh: missing ]
  30. Lakka:~ # [ 0.000000] Using GB pages for direct mapping
  31. -sh: missing ]
  32. Lakka:~ # [ 0.000000] BRK [0x0377a000, 0x0377afff] PGTABLE
  33. -sh: missing ]
  34. and line: root=/dev/ramLakka:~ # [ 0.000000] BRK [0x0377b000, 0x0377bfff] PGTABLE
  35. -sh: missing ]
  36. Lakka:~ # [ 0.000000] BRK [0x0377c000, 0x0377cfff] PGTABLE
  37. -sh: missing ]
  38. Lakka:~ # [ 0.000000] BRK [0x0377d000, 0x0377dfff] PGTABLE
  39. -sh: missing ]
  40. Lakka:~ # [ 0.000000] BRK [0x0377e000, 0x0377efff] PGTABLE
  41. -sh: missing ]
  42. Lakka:~ # [ 0.000000] ACPI: Early table checksum verification disabled
  43. No A-sh: missing ]
  44. Lakka:~ # [ 0.000000] ACPI: RSDP 0x00000000000F7D40 000014 (v00 Nvidia)
  45. -sh: syntax error: unexpected "("
  46. Lakka:~ # [ 0.000000] ACPI: RSDT 0x000000007FEE3000 000038 (v01 Nvidia NVDAAC
  47. PI 42302E31 NVDA 00000000)
  48. ] Memory-sh: syntax error: unexpected "("
  49. Lakka:~ # [ 0.000000] ACPI: FACP 0x000000007FEE3080 000074 (v01 Nvidia NVDAAC
  50. PI 42302E31 NVDA 00000000)
  51. -sh: syntax error: unexpected "("
  52. Lakka:~ # [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2Control
  53. Block has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt
  54. -658)
  55. -sh: syntax error: unexpected "("
  56. Lakka:~ # [ 0.000000] ACPI: DSDT 0x000000007FEE3100 006020 (v01 NVIDIA NVDAAC
  57. PI 00001000 MSFT 03000000)
  58. -sh: syntax error: unexpected "("C
  59. Lakka:~ # [ 0.000000] ACPI: FACS 0x000000007FEE0000 000040
  60. -sh: missing ]
  61. Lakka:~ # [ 0.000000] ACPI: HPET 0x000000007FEE9200 000038 (v01 Nvidia NVDAAC
  62. PI 42302E31 NVDA 00000098)
  63. -sh: syntax error: unexpected "("
  64. Lakka:~ # [ 0.000000] ACPI: MCFG 0x000000007FEE9240 00003C (v01 Nvidia NVDAAC
  65. PI 42302E31 NVDA 00000000)
  66. -sh: syntax error: unexpected "("
  67. Lakka:~ # [ 0.000000] ACPI: SLIC 0x000000007FEE9280 000176 (v01 Nvidia NVDAAC
  68. PI 42302E31 NVDA 00000000)
  69. -sh: syntax error: unexpected "("
  70. Lakka:~ # [ 0.000000] ACPI: APIC 0x000000007FEE9140 000098 (v01 Nvidia NVDAAC
  71. PI 42302E31 NVDA 00000000)
  72. 0000-sh: syntax error: unexpected "("
  73. Lakka:~ # [ 0.000000] ACPI: Local APIC address 0xfee00000
  74. -sh: missing ]
  75. Lakka:~ # [ 0.000000] No NUMA configuration found
  76.  
  77. [ -sh: missing ]
  78. Lakka:~ # [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fed
  79. ffff]
  80. r f-sh: missing ]
  81. Lakka:~ # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fedc000-0x7fedffff]
  82. -sh: syntax error: unexpected "("
  83. Lakka:~ # [ 0.000000] Zone ranges:
  84. -sh: missing ]
  85. Lakka:~ # [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  86. -sh: missing ]
  87. Lakka:~ # [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007fedffff]
  88. ca-sh: missing ]
  89. Lakka:~ # [ 0.000000] Normal empty
  90. (-sh: missing ]
  91. Lakka:~ # [ 0.000000] Movable zone start for each node
  92. -sh: missing ]
  93. Lakka:~ # [ 0.000000] Early memory node ranges
  94. er: 8-sh: missing ]
  95. Lakka:~ # [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
  96. -sh: missing ]
  97. Lakka:~ # [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fedffff]
  98. trie-sh: missing ]
  99. Lakka:~ # [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000
  100. 7fedffff]
  101. -sh: missing ]
  102. Lakka:~ # [ 0.000000] On node 0 totalpages: 523902
  103. 0-sh: missing ]
  104. Lakka:~ # [ 0.000000] DMA zone: 64 pages used for memmap
  105. -sh: missing ]
  106. Lakka:~ # [ 0.000000] DMA zone: 21 pages reserved
  107. -sh: missing ]
  108. Lakka:~ # [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
  109. TLB ent-sh: missing ]
  110. Lakka:~ # [ 0.000000] DMA32 zone: 8124 pages used for memmap
  111. -sh: missing ]
  112. Lakka:~ # [ 0.000000] DMA32 zone: 519904 pages, LIFO batch:31
  113. f-sh: missing ]
  114. Lakka:~ # [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
  115. -sh: missing ]
  116. Lakka:~ # [ 0.000000] ACPI: Local APIC address 0xfee00000
  117. =0x3-sh: missing ]
  118. Lakka:~ # [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  119. -sh: syntax error: unexpected "("
  120. DLakka:~ # [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  121. -sh: syntax error: unexpected "("
  122. Lakka:~ # [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  123. -sh: syntax error: unexpected "("
  124. Lakka:~ # [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  125. -sh: syntax error: unexpected "("
  126. Lakka:~ # [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, G
  127. SI 0-23
  128. a-sh: missing ]
  129. Lakka:~ # [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl
  130. )
  131. -sh: syntax error: unexpected "("
  132. Lakka:~ # [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high le
  133. vel)
  134. -sh: syntax error: unexpected "("
  135. Lakka:~ # [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high
  136. edge)
  137. -sh: syntax error: unexpected "("
  138. Lakka:~ # [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high
  139. edge)
  140. -sh: syntax error: unexpected "("
  141. Lakka:~ # [ 0.000000] ACPI: IRQ0 used by override.
  142. -sh: missing ]
  143. Lakka:~ # [ 0.000000] ACPI: IRQ9 used by override.
  144. -sh: missing ]
  145. Lakka:~ # [ 0.000000] ACPI: IRQ14 used by override.
  146. CPUs
  147. [-sh: missing ]
  148. Lakka:~ # [ 0.000000] ACPI: IRQ15 used by override.
  149. -sh: missing ]
  150. Lakka:~ # [ 0.000000] Using ACPI (MADT) for SMP configuration information
  151. -sh: syntax error: unexpected "("
  152. Lakka:~ # [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
  153. -sh: missing ]
  154. Lakka:~ # [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
  155. -sh: missing ]
  156. Lakka:~ # [ 0.000000] e820: [mem 0x7ff00000-0xefffffff] available for PCI dev
  157. ices
  158. -sh: missing ]
  159. Lakka:~ # [ 0.000000] Booting paravirtualized kernel on bare hardware
  160. -sh: missing ]
  161. Lakka:~ # [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycl
  162. es: 0xffffffff, max_idle_ns: 6370452778343963 ns
  163. -sh: missing ]
  164. Lakka:~ # [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:
  165. 4 nr_node_ids:1
  166. -sh: missing ]
  167. Lakka:~ # [ 0.000000] percpu: Embedded 33 pages/cpu @ffff88007fc00000 s95256
  168. r8192 d31720 u524288
  169. -sh: missing ]
  170. Lakka:~ # [ 0.000000] pcpu-alloc: s95256 r8192 d31720 u524288 alloc=1*2097152
  171. ] cp-sh: missing ]
  172. Lakka:~ # [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  173. -sh: missing ]
  174. Lakka:~ # [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
  175. Total pages: 515693
  176. -sh: missing ]
  177. Lakka:~ # [ 0.000000] Policy zone: DMA32
  178. -sh: missing ]
  179. Lakka:~ # [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcor
  180. e.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet
  181. vt.global_cursor_default=0 loglevel=2
  182. -sh: missing ]
  183. Lakka:~ # [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  184. -sh: syntax error: unexpected "("
  185. Lakka:~ # [ 0.000000] AGP: Checking aperture...
  186. -sh: missing ]
  187. Lakka:~ # [ 0.000000] AGP: No AGP bridge found
  188. -sh: missing ]
  189. s: [bus 00-0Lakka:~ # [ 0.000000] AGP: Node 0: aperture [bus addr 0x208000000-0x209ffffff
  190. ] (32MB)
  191. 9003] b-sh: syntax error: unexpected "("
  192. Lakka:~ # [ 0.000000] Aperture beyond 4GB. Ignoring.
  193. -sh: missing ]
  194. Lakka:~ # [ 0.000000] Memory: 2021704K/2095608K available (12143K kernel code
  195. , 954K rwdata, 21176K rodata, 4196K init, 404K bss, 73904K reserved, 0K cma-rese
  196. rved)
  197. 912-sh: syntax error: unexpected "("
  198. Lakka:~ # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Node
  199. s=1
  200. -sh: missing ]
  201. Lakka:~ # [ 0.000000] Hierarchical RCU implementation.
  202. (-sh: missing ]
  203. Lakka:~ # [ 0.000000] Build-time adjustment of leaf fanout to 64.
  204. -sh: missing ]
  205. Lakka:~ # [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
  206. -sh: missing ]
  207. Lakka:~ # [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_
  208. ids=4
  209. -sh: missing ]
  210. Lakka:~ # [ 0.000000] NR_IRQS:4352 nr_irqs:456 16
  211. -sh: missing ]
  212. Lakka:~ # [ 0.000000] spurious 8259A interrupt: IRQ7.
  213. -sh: missing ]
  214. Lakka:~ # [ 0.000000] Console: colour VGA+ 80x25
  215. -sh: missing ]
  216. Lakka:~ # [ 0.000000] console [tty0] enabled
  217. -sh: missing ]
  218. Lakka:~ # [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xfffff
  219. fff, max_idle_ns: 76450417870 ns
  220. -sh: missing ]
  221. Lakka:~ # [ 0.000000] hpet clockevent registered
  222. -sh: missing ]
  223. Lakka:~ # [ 0.000000] tsc: Fast TSC calibration using PIT
  224. -sh: missing ]
  225. Lakka:~ # [ 0.000000] tsc: Detected 2812.902 MHz processor
  226. -sh: missing ]
  227. Lakka:~ # [ 0.000026] Calibrating delay loop (skipped), value calculated usin
  228. g timer frequency.. 5628.21 BogoMIPS (lpj=9376340)
  229. -sh: syntax error: unexpected "("
  230. Lakka:~ # [ 0.000028] pid_max: default: 32768 minimum: 301
  231. -sh: missing ]
  232. Added _OSI(Lakka:~ # [ 0.000034] ACPI: Core revision 20160831
  233. 162] -sh: missing ]
  234. Lakka:~ # [ 0.002905] ACPI: 1 ACPI AML tables successfully acquired and loade
  235. d
  236. -sh: missing ]
  237. Lakka:~ # [ 0.003014] Dentry cache hash table entries: 262144 (order: 9, 2097
  238. 152 bytes)
  239. ng host-sh: syntax error: unexpected "("
  240. Lakka:~ # [ 0.003905] Inode-cache hash table entries: 131072 (order: 8, 10485
  241. 76 bytes)
  242. -sh: syntax error: unexpected "("
  243. Lakka:~ # [ 0.004333] Mount-cache hash table entries: 4096 (order: 3, 32768 b
  244. ytes)
  245. -sh: syntax error: unexpected "("
  246. Lakka:~ # [ 0.004335] Mountpoint-cache hash table entries: 4096 (order: 3, 32
  247. 768 bytes)
  248. -sh: syntax error: unexpected "("
  249. Lakka:~ # [ 0.004620] CPU: Physical Processor ID: 0
  250. -sh: missing ]
  251. Lakka:~ # [ 0.004621] CPU: Processor Core ID: 0
  252. b-sh: missing ]
  253. Lakka:~ # [ 0.004623] process: using AMD E400 aware idle routine
  254. -sh: missing ]
  255. Lakka:~ # [ 0.004625] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
  256. 6-sh: missing ]
  257. Lakka:~ # [ 0.004626] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB
  258. 0
  259. -sh: missing ]
  260. Lakka:~ # [ 0.004781] Freeing SMP alternatives memory: 44K (ffffffff83709000
  261. - ffffffff83714000)
  262. -sh: syntax error: unexpected "("
  263. .96Lakka:~ # [ 0.007571] smpboot: Max logical packages: 2
  264. -sh: missing ]
  265. Lakka:~ # [ 0.008068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  266. 0-sh: missing ]
  267. Lakka:~ # [ 0.433592] smpboot: CPU0: AMD Athlon(tm) X2 240 Processor (family:
  268. 0x10, model: 0x6, stepping: 0x2)
  269. -sh: syntax error: unexpected "("
  270. rLakka:~ # [ 0.433596] Performance Events: AMD PMU driver.
  271. 0.-sh: missing ]
  272. Lakka:~ # [ 0.433600] ... version: 0
  273. [i-sh: missing ]
  274. Lakka:~ # [ 0.433601] ... bit width: 48
  275. _bu-sh: missing ]
  276. Lakka:~ # [ 0.433601] ... generic registers: 4
  277. -sh: missing ]
  278. Lakka:~ # [ 0.433602] ... value mask: 0000ffffffffffff
  279. ource-sh: missing ]
  280. Lakka:~ # [ 0.433602] ... max period: 00007fffffffffff
  281. -sh: missing ]
  282. Lakka:~ # [ 0.433603] ... fixed-purpose events: 0
  283. -sh: missing ]
  284. Lakka:~ # [ 0.433603] ... event mask: 000000000000000f
  285. -sh: missing ]
  286. Lakka:~ # [ 0.433857] NMI watchdog: enabled on all CPUs, permanently consumes
  287. one hw-PMU counter.
  288. -sh: missing ]
  289. Lakka:~ # [ 0.433952] x86: Booting SMP configuration:
  290. -sh: missing ]
  291. Lakka:~ # [ 0.433953] .... node #0, CPUs: #1
  292. -sh: missing ]
  293. Lakka:~ # [ 0.519025] x86: Booted up 1 node, 2 CPUs
  294. _bus 0-sh: missing ]
  295. Lakka:~ # [ 0.519027] smpboot: Total of 2 processors activated (11256.61 Bogo
  296. MIPS)
  297. 0de-sh: syntax error: unexpected "("
  298. Lakka:~ # [ 0.519712] devtmpfs: initialized
  299. -sh: missing ]
  300. Lakka:~ # [ 0.520019] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2
  301. fff] (12288 bytes)
  302. -sh: syntax error: unexpected "("
  303. Lakka:~ # [ 0.520056] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xff
  304. ffffff, max_idle_ns: 6370867519511994 ns
  305. .9-sh: missing ]
  306. Lakka:~ # [ 0.520065] futex hash table entries: 1024 (order: 4, 65536 bytes)
  307. 55] -sh: syntax error: unexpected "("
  308. Lakka:~ # [ 0.520100] xor: measuring software checksum speed
  309. -sh: missing ]
  310. Lakka:~ # [ 0.550270] prefetch64-sse: 13519.200 MB/sec
  311. -0x-sh: missing ]
  312. Lakka:~ # [ 0.583603] generic_sse: 12652.800 MB/sec
  313. upp-sh: missing ]
  314. Lakka:~ # [ 0.583604] xor: using function: prefetch64-sse (13519.200 MB/sec)
  315. 5] t-sh: syntax error: unexpected "("
  316. Lakka:~ # [ 0.583608] pinctrl core: initialized pinctrl subsystem
  317. -sh: missing ]
  318. Lakka:~ # [ 0.583719] NET: Registered protocol family 16
  319. -sh: missing ]
  320. Lakka:~ # [ 0.595649] cpuidle: using governor ladder
  321. fe02-sh: missing ]
  322. Lakka:~ # [ 0.608983] cpuidle: using governor menu
  323. -sh: missing ]
  324. Lakka:~ # [ 0.608990] node 0 link 0: io port [8000, ffff]
  325. up-sh: missing ]
  326. Lakka:~ # [ 0.608992] TOM: 0000000080000000 aka 2048M
  327. 69799-sh: missing ]
  328. Lakka:~ # [ 0.608994] Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
  329. 0.-sh: missing ]
  330. Lakka:~ # [ 0.608995] node 0 link 0: mmio [a0000, bffff]
  331. -sh: missing ]
  332. Lakka:~ # [ 0.608997] node 0 link 0: mmio [80000000, efffffff]
  333. -sh: missing ]
  334. Lakka:~ # [ 0.608999] node 0 link 0: mmio [f4000000, fe02ffff]
  335. -sh: missing ]
  336. Lakka:~ # [ 0.609000] node 0 link 0: mmio [f0000000, f03fffff] ==> [f0100000,
  337. f03fffff]
  338. -sh: missing ]
  339. Lakka:~ # [ 0.609002] bus: [bus 00-04] on node 0 link 0
  340. -sh: missing ]
  341. Lakka:~ # [ 0.609003] bus: 00 [io 0x0000-0xffff]
  342. ] p-sh: missing ]
  343. Lakka:~ # [ 0.609003] bus: 00 [mem 0x000a0000-0x000bffff]
  344. 01-sh: missing ]
  345. Lakka:~ # [ 0.609004] bus: 00 [mem 0x80000000-0xefffffff]
  346. s-sh: missing ]
  347. Lakka:~ # [ 0.609005] bus: 00 [mem 0xf0400000-0xfcffffffff]
  348. e:-sh: missing ]
  349. Lakka:~ # [ 0.609005] bus: 00 [mem 0xf0100000-0xf03fffff]
  350. -sh: missing ]
  351. Lakka:~ # [ 0.609127] ACPI: bus type PCI registered
  352. 027f-sh: missing ]
  353. Lakka:~ # [ 0.609202] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf00
  354. 00000-0xf3ffffff] (base 0xf0000000)
  355. -sh: syntax error: unexpected "("
  356. Lakka:~ # [ 0.609204] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved i
  357. n E820
  358. e-sh: missing ]
  359. Lakka:~ # [ 0.609212] PCI: Using configuration type 1 for base access
  360. x20: [-sh: missing ]
  361. Lakka:~ # [ 0.676946] raid6: sse2x1 gen() 3628 MB/s
  362. 0:06-sh: syntax error: unexpected "("
  363. Lakka:~ # [ 0.733605] raid6: sse2x1 xor() 3798 MB/s
  364. -sh: syntax error: unexpected "("
  365. Lakka:~ # [ 0.790278] raid6: sse2x2 gen() 6066 MB/s
  366. IDE -sh: syntax error: unexpected "("
  367. Lakka:~ # [ 0.846937] raid6: sse2x2 xor() 6497 MB/s
  368. -sh: syntax error: unexpected "("
  369. Lakka:~ # [ 0.903618] raid6: sse2x4 gen() 6507 MB/s
  370. -sh: syntax error: unexpected "("
  371. Lakka:~ # [ 0.960274] raid6: sse2x4 xor() 4031 MB/s
  372. -sh: syntax error: unexpected "("
  373. Lakka:~ # [ 0.960275] raid6: using algorithm sse2x4 gen() 6507 MB/s
  374. ci 0-sh: syntax error: unexpected "("
  375. Lakka:~ # [ 0.960276] raid6: .... xor() 4031 MB/s, rmw enabled
  376. -sh: syntax error: unexpected "("
  377. Lakka:~ # [ 0.960277] raid6: using intx1 recovery algorithm
  378. -sh: missing ]
  379. Lakka:~ # [ 0.960324] ACPI: Added _OSI(Module Device)
  380. eg -sh: syntax error: unexpected "("
  381. Lakka:~ # [ 0.960325] ACPI: Added _OSI(Processor Device)
  382. -sh: syntax error: unexpected "("
  383. Lakka:~ # [ 0.960325] ACPI: Added _OSI(3.0 _SCP Extensions)
  384. -sh: syntax error: unexpected "("
  385. Lakka:~ # [ 0.960326] ACPI: Added _OSI(Processor Aggregator Device)
  386. -sh: syntax error: unexpected "("
  387. Lakka:~ # [ 0.963162] ACPI: Interpreter enabled
  388. bled -sh: missing ]
  389. Lakka:~ # [ 0.963176] ACPI: (supports S0 S3 S5)
  390. 0: -sh: syntax error: unexpected "("
  391. Lakka:~ # [ 0.963177] ACPI: Using IOAPIC for interrupt routing
  392. 00-sh: missing ]
  393. Lakka:~ # [ 0.963195] PCI: Using host bridge windows from ACPI; if necessary,
  394. use "pci=nocrs" and report a bug
  395. ]> [ 0.968563] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
  396. 0-sh: syntax error: unexpected "(" (expecting "then")
  397. Lakka:~ # [ 0.968568] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
  398. ClockPM Segments MSI]
  399. -sh: missing ]
  400. Lakka:~ # [ 0.968671] acpi PNP0A08:00: _OSC: platform does not support [PCIeH
  401. otplug PCIeCapability]
  402. -sh: missing ]
  403. Lakka:~ # [ 0.968721] acpi PNP0A08:00: _OSC: not requesting control; platform
  404. does not support [PCIeCapability]
  405. 0.970441] pci 0000:00:08.1:-sh: missing ]
  406. -sh: platform: not found
  407. Lakka:~ # [ 0.968723] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AE
  408. R PCIeCapability]
  409. 0-0x-sh: missing ]
  410. Lakka:~ # [ 0.968724] acpi PNP0A08:00: _OSC: platform willing to grant [PME A
  411. ER]
  412. -sh: missing ]
  413. Lakka:~ # [ 0.968725] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling AS
  414. PM
  415. c: [io 0x0b60-0x0b63]
  416. [ 0.970453] -sh: syntax error: unexpected "("
  417. Lakka:~ # [ 0.969215] PCI host bridge to bus 0000:00
  418. -sh: missing ]
  419. Lakka:~ # [ 0.969217] pci_bus 0000:00: root bus resource [io 0x0000-0x03af w
  420. indow]
  421. -sh: missing ]
  422. Lakka:~ # [ 0.969218] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 w
  423. indow]
  424. 70555-sh: missing ]
  425. Lakka:~ # [ 0.969219] pci_bus 0000:00: root bus resource [io 0x8000-0xffff w
  426. indow]
  427. 590] -sh: missing ]
  428. Lakka:~ # [ 0.969220] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df w
  429. indow]
  430. 0:0-sh: missing ]
  431. Lakka:~ # [ 0.969221] pci_bus 0000:00: root bus resource [io 0x1c00-0x1c80 w
  432. indow]
  433. PME#-sh: missing ]
  434. Lakka:~ # [ 0.969222] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfe
  435. cbffff window]
  436. -sh: missing ]
  437. Lakka:~ # [ 0.969224] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x00
  438. 0bffff window]
  439. -sh: missing ]
  440. Lakka:~ # [ 0.969225] pci_bus 0000:00: root bus resource [mem 0x80000000-0xef
  441. ffffff window]
  442. -sh: missing ]
  443. Lakka:~ # [ 0.969226] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe
  444. 02ffff window]
  445. -sh: missing ]
  446. Lakka:~ # [ 0.969227] pci_bus 0000:00: root bus resource [bus 00-04]
  447. 0:0-sh: missing ]
  448. Lakka:~ # [ 0.969245] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
  449. -sh: missing ]
  450. Lakka:~ # [ 0.969445] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
  451. :0-sh: missing ]
  452. Lakka:~ # [ 0.969457] pci 0000:00:01.0: reg 0x18: [io 0x1d00-0x1dff]
  453. pci 0-sh: missing ]
  454. Lakka:~ # [ 0.969534] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
  455. 0-sh: missing ]
  456. Lakka:~ # [ 0.969542] pci 0000:00:01.1: reg 0x10: [io 0xfc00-0xfc3f]
  457. -sh: missing ]
  458. Lakka:~ # [ 0.969555] pci 0000:00:01.1: reg 0x20: [io 0x1c00-0x1c3f]
  459. ]
  460. -sh: missing ]
  461. Lakka:~ # [ 0.969559] pci 0000:00:01.1: reg 0x24: [io 0x1c40-0x1c7f]
  462. -sh: missing ]
  463. Lakka:~ # [ 0.969583] pci 0000:00:01.1: PME# supported from D3hot D3cold
  464. me-sh: missing ]
  465. Lakka:~ # [ 0.969648] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
  466. -sh: missing ]
  467. Lakka:~ # [ 0.969725] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
  468. 0.97-sh: missing ]
  469. Lakka:~ # [ 0.969731] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
  470. -sh: missing ]
  471. Lakka:~ # [ 0.969762] pci 0000:00:02.0: supports D1 D2
  472. -sh: missing ]
  473. Lakka:~ # [ 0.969763] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3
  474. cold
  475. -sh: missing ]
  476. Lakka:~ # [ 0.969799] pci 0000:00:02.0: System wakeup disabled by ACPI
  477. -sh: missing ]
  478. Lakka:~ # [ 0.969826] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
  479. i-sh: missing ]
  480. Lakka:~ # [ 0.969834] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
  481. ci-sh: missing ]
  482. Lakka:~ # [ 0.969869] pci 0000:00:02.1: supports D1 D2
  483. -sh: missing ]
  484. Lakka:~ # [ 0.969870] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3
  485. cold
  486. -sh: missing ]
  487. Lakka:~ # [ 0.969914] pci 0000:00:02.1: System wakeup disabled by ACPI
  488. -sh: missing ]
  489. Lakka:~ # [ 0.969948] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
  490. -sh: missing ]
  491. Lakka:~ # [ 0.970006] pci 0000:00:04.0: System wakeup disabled by ACPI
  492. 0-sh: missing ]
  493. Lakka:~ # [ 0.970033] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
  494. -sh: missing ]
  495. Lakka:~ # [ 0.970041] pci 0000:00:05.0: reg 0x10: [mem 0xfe024000-0xfe027fff]
  496. la-sh: missing ]
  497. Lakka:~ # [ 0.970077] pci 0000:00:05.0: PME# supported from D3hot D3cold
  498. -sh: missing ]
  499. Lakka:~ # [ 0.970114] pci 0000:00:05.0: System wakeup disabled by ACPI
  500. 4: [mem-sh: missing ]
  501. Lakka:~ # [ 0.970146] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
  502. -sh: missing ]
  503. Lakka:~ # [ 0.970164] pci 0000:00:06.0: reg 0x20: [io 0xf000-0xf00f]
  504. ]-sh: missing ]
  505. Lakka:~ # [ 0.970173] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01
  506. f0-0x01f7]
  507. :-sh: missing ]
  508. Lakka:~ # [ 0.970174] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03
  509. f6]
  510. -sh: missing ]
  511. Lakka:~ # [ 0.970175] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x01
  512. 70-0x0177]
  513. -sh: missing ]
  514. Lakka:~ # [ 0.970176] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x03
  515. 76]
  516. to-sh: missing ]
  517. Lakka:~ # [ 0.970242] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
  518. -sh: missing ]
  519. Lakka:~ # [ 0.970248] pci 0000:00:07.0: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
  520. -sh: missing ]
  521. Lakka:~ # [ 0.970251] pci 0000:00:07.0: reg 0x14: [io 0xec00-0xec07]
  522. nd-sh: missing ]
  523. Lakka:~ # [ 0.970282] pci 0000:00:07.0: supports D1 D2
  524. -sh: missing ]
  525. Lakka:~ # [ 0.970283] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3
  526. cold
  527. 0-sh: missing ]
  528. Lakka:~ # [ 0.970319] pci 0000:00:07.0: System wakeup disabled by ACPI
  529. -sh: missing ]
  530. Lakka:~ # [ 0.970346] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
  531. -sh: missing ]
  532. Lakka:~ # [ 0.970352] pci 0000:00:08.0: reg 0x10: [io 0x09f0-0x09f7]
  533. f-sh: missing ]
  534. Lakka:~ # [ 0.970355] pci 0000:00:08.0: reg 0x14: [io 0x0bf0-0x0bf3]
  535. [b-sh: missing ]
  536. Lakka:~ # [ 0.970358] pci 0000:00:08.0: reg 0x18: [io 0x0970-0x0977]
  537. -sh: missing ]
  538. Lakka:~ # [ 0.970361] pci 0000:00:08.0: reg 0x1c: [io 0x0b70-0x0b73]
  539. [-sh: missing ]
  540. Lakka:~ # [ 0.970364] pci 0000:00:08.0: reg 0x20: [io 0xd800-0xd80f]
  541. -sh: missing ]
  542. Lakka:~ # [ 0.970367] pci 0000:00:08.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
  543. -sh: missing ]
  544. Lakka:~ # [ 0.970436] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
  545. -sh: missing ]
  546. Lakka:~ # [ 0.970441] pci 0000:00:08.1: reg 0x10: [io 0x09e0-0x09e7]
  547. 0 11-sh: missing ]
  548. Lakka:~ # [ 0.970444] pci 0000:00:08.1: reg 0x14: [io 0x0be0-0x0be3]
  549. -sh: missing ]
  550. Lakka:~ # [ 0.970447] pci 0000:00:08.1: reg 0x18: [io 0x0960-0x0967]
  551. 1484] ACP-sh: missing ]
  552. Lakka:~ # [ 0.970450] pci 0000:00:08.1: reg 0x1c: [io 0x0b60-0x0b63]
  553. -sh: missing ]
  554. Lakka:~ # [ 0.970453] pci 0000:00:08.1: reg 0x20: [io 0xc400-0xc40f]
  555. s 5 7 9-sh: missing ]
  556. Lakka:~ # [ 0.970456] pci 0000:00:08.1: reg 0x24: [mem 0xfe02b000-0xfe02bfff]
  557. 7-sh: missing ]
  558. Lakka:~ # [ 0.970530] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
  559. -sh: missing ]
  560. Lakka:~ # [ 0.970555] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3
  561. cold
  562. n-sh: missing ]
  563. Lakka:~ # [ 0.970590] pci 0000:00:09.0: System wakeup disabled by ACPI
  564. -sh: missing ]
  565. Lakka:~ # [ 0.970618] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
  566. led.
  567. -sh: missing ]
  568. Lakka:~ # [ 0.970641] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3
  569. cold
  570. -sh: missing ]
  571. Lakka:~ # [ 0.970675] pci 0000:00:0b.0: System wakeup disabled by ACPI
  572. -sh: missing ]
  573. Lakka:~ # [ 0.970703] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
  574. -sh: missing ]
  575. Lakka:~ # [ 0.970726] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3
  576. cold
  577. -sh: missing ]
  578. RLakka:~ # [ 0.970760] pci 0000:00:0c.0: System wakeup disabled by ACPI
  579. -sh: missing ]
  580. Lakka:~ # [ 0.970796] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
  581. -sh: missing ]
  582. Lakka:~ # [ 0.970857] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
  583. -sh: missing ]
  584. Lakka:~ # [ 0.970914] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
  585. -sh: missing ]
  586. Lakka:~ # [ 0.970971] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
  587. b-sh: missing ]
  588. Lakka:~ # [ 0.971030] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
  589. -sh: missing ]
  590. Lakka:~ # [ 0.971136] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive d
  591. ecode)
  592. -sh: syntax error: unexpected "("
  593. Lakka:~ # [ 0.971138] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
  594. -sh: missing ]
  595. Lakka:~ # [ 0.971140] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdf
  596. fffff]
  597. -sh: missing ]
  598. Lakka:~ # [ 0.971142] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfde
  599. fffff pref]
  600. -sh: missing ]
  601. Lakka:~ # [ 0.971143] pci 0000:00:04.0: bridge window [io 0x0000-0x03af wi
  602. ndow] (subtractive decode)
  603. -sh: syntax error: unexpected "("
  604. Lakka:~ # [ 0.971144] pci 0000:00:04.0: bridge window [io 0x03e0-0x0cf7 wi
  605. ndow] (subtractive decode)
  606.  
  607. [ 0.982416] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, -sh: syntax error: unexpected "("
  608. Lakka:~ # [ 0.971145] pci 0000:00:04.0: bridge window [io 0x8000-0xffff wi
  609. ndow] (subtractive decode)
  610. -sh: 2531] Asyntax error: unexpected "("
  611. Lakka:~ # [ 0.971146] pci 0000:00:04.0: bridge window [io 0x03b0-0x03df wi
  612. ndow] (subtractive decode)
  613. -sh: Asyntax error: unexpected "("
  614. Lakka:~ # [ 0.971147] pci 0000:00:04.0: bridge window [io 0x1c00-0x1c80 wi
  615. ndow] (subtractive decode)
  616. -sh: syntax error: unexpected "("
  617. pt Link [APCF] (IRQs 20 21 22)Lakka:~ # [ 0.971148] pci 0000:00:04.0: bridge window [mem 0xfec80000-0xfec
  618. bffff window] (subtractive decode)
  619. -sh: syntax error: unexpected "("
  620. Lakka:~ # [ 0.971150] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000
  621. bffff window] (subtractive decode)
  622. -sh: syntax error: unexpected "("
  623. Lakka:~ # [ 0.971151] pci 0000:00:04.0: bridge window [mem 0x80000000-0xeff
  624. fffff window] (subtractive decode)
  625. -sh: syntax error: unexpected "("
  626. Lakka:~ # [ 0.971152] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfe0
  627. 2ffff window] (subtractive decode)
  628. -sh: syntax error: unexpected "("
  629. Lakka:~ # [ 0.971179] pci 0000:02:00.0: [10de:0de1] type 00 class 0x030000
  630. -sh: missing ]
  631. Lakka:~ # [ 0.971187] pci 0000:02:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
  632. -sh: missing ]
  633. Lakka:~ # [ 0.971194] pci 0000:02:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff
  634. 64bit pref]
  635. -sh: missing ]
  636. Lakka:~ # [ 0.971201] pci 0000:02:00.0: reg 0x1c: [mem 0xe6000000-0xe7ffffff
  637. 64bit pref]
  638. -sh: missing ]
  639. Lakka:~ # [ 0.971206] pci 0000:02:00.0: reg 0x24: [io 0xac00-0xac7f]
  640. -sh: missing ]
  641. Lakka:~ # [ 0.971211] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff
  642. pref]
  643. -sh: missing ]
  644. Lakka:~ # [ 0.971271] pci 0000:02:00.1: [10de:0bea] type 00 class 0x040300
  645. -sh: missing ]
  646. 18] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0, disabled.
  647. [ 0.982875] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0, disabled.
  648. [ 0.982933] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
  649. [ 0.982990] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
  650. [ 0.983047] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
  651. [ 0.983105] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0, disabled.
  652. [ 0.983162] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0, disabled.
  653. [ 0.983230] ACPI: Enabled 1 GPEs in block 00 to 1F
  654. [ 0.983386] vgaarb: setting as boot device: PCI:0000:02:00.0
  655. [ 0.983387] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
  656. [ 0.983388] vgaarb: lLakka:~ # [ 0.971279] pci 0000:02:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
  657. -sh: missing ]
  658. Lakka:~ # [ 0.980322] pci 0000:00:09.0: PCI bridge to [bus 02]
  659. a-sh: missing ]
  660. Lakka:~ # [ 0.980326] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
  661. -sh: missing ]
  662. Lakka:~ # [ 0.980328] pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcf
  663. fffff]
  664. -sh: missing ]
  665. Lakka:~ # [ 0.980330] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xe7f
  666. fffff 64bit pref]
  667. -sh: missing ]
  668. Lakka:~ # [ 0.980376] pci 0000:00:0b.0: PCI bridge to [bus 03]
  669. -sh: missing ]
  670. Lakka:~ # [ 0.980378] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
  671. -sh: missing ]
  672. Lakka:~ # [ 0.980379] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfdd
  673. fffff]
  674. -sh: missing ]
  675. Lakka:~ # [ 0.980381] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdc
  676. fffff 64bit pref]
  677. -sh: missing ]
  678. Lakka:~ # [ 0.980407] pci 0000:00:0c.0: PCI bridge to [bus 04]
  679. -sh: missing ]
  680. Lakka:~ # [ 0.980409] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
  681. -sh: missing ]
  682. Lakka:~ # [ 0.980411] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdb
  683. fffff]
  684. -sh: missing ]
  685. 1dfLakka:~ # [ 0.980413] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfda
  686. fffff 64bit pref]
  687. -sh: missing ]
  688. Lakka:~ # [ 0.981365] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15
  689. ) *0, disabled.
  690. 0-sh: syntax error: unexpected "("
  691. Lakka:~ # [ 0.981406] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15
  692. ) *0, disabled.
  693. -sh: syntax error: unexpected "("
  694. Lakka:~ # [ 0.981445] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15
  695. ) *0, disabled.
  696. -sh: syntax error: unexpected "("
  697. .Lakka:~ # [ 0.981484] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15
  698. ) *0, disabled.
  699. -sh: syntax error: unexpected "("
  700. Lakka:~ # [ 0.981523] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 1
  701. 5)
  702. :00: [io-sh: syntax error: unexpected "("
  703. Lakka:~ # [ 0.981562] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15
  704. ) *0, disabled.
  705. -sh: syntax error: unexpected "("
  706. Lakka:~ # [ 0.981600] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15
  707. ) *0, disabled.
  708. been reserved
  709. [ 0.985553] system 00:00: [io 0x1800-0x187f] has been reserved
  710. [ -sh: syntax error: unexpected "("
  711. Lakka:~ # [ 0.981640] ACPI: PCI Interrupt Link [LNK8] (IRQs *5 7 9 10 11 14 1
  712. 5)
  713. -sh: syntax error: unexpected "("
  714. Lakka:~ # [ 0.981678] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15
  715. ) *0, disabled.
  716. tem-sh: 00:00:syntax error: unexpected "("
  717. Lakka:~ # [ 0.981716] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15
  718. ) *0, disabled.
  719. -sh: syntax error: unexpected "("
  720. Lakka:~ # [ 0.981756] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 1
  721. 5)
  722. -sh: syntax error: unexpected "("
  723. Lakka:~ # [ 0.981794] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *1
  724. 5)
  725. -sh: syntax error: unexpected "("
  726. Lakka:~ # [ 0.981833] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 1
  727. 5)
  728. -sh: syntax error: unexpected "("
  729. Lakka:~ # [ 0.981871] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15
  730. ) *0, disabled.
  731. -sh: syntax error: unexpected "("
  732. Lakka:~ # [ 0.981910] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 1
  733. 5)
  734. -sh: syntax error: unexpected "("
  735. Lakka:~ # [ 0.981954] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 1
  736. 5)
  737. 0 (active-sh: syntax error: unexpected "("
  738. Lakka:~ # [ 0.981993] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15
  739. ) *0, disabled.
  740. -sh: syntax error: unexpected "("
  741. Lakka:~ # [ 0.982031] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 1
  742. 5)
  743. -sh: syntax error: unexpected "("
  744. Lakka:~ # [ 0.982070] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 1
  745. 5)
  746. -sh: syntax error: unexpected "("
  747. Lakka:~ # [ 0.982131] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
  748. -sh: syntax error: unexpected "("
  749. Lakka:~ # [ 0.982188] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
  750. -sh: syntax error: unexpected "("
  751. 0.986973] system 00:07: [mem Lakka:~ # [ 0.982245] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
  752. -sh: syntax error: unexpected "("
  753. tem 00:07: PLakka:~ # [ 0.982302] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
  754. ystem -sh: 00syntax error: unexpected "("
  755. Lakka:~ # [ 0.982359] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
  756. .987047] s-sh: syntax error: unexpected "("
  757. Lakka:~ # [ 0.982416] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
  758. 4-sh: syntax error: unexpected "("
  759. Lakka:~ # [ 0.982473] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
  760. rved
  761. -sh: [ syntax error: unexpected "("
  762. Lakka:~ # [ 0.982531] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
  763. -sh: syntax error: unexpected "("
  764. Lakka:~ # [ 0.982588] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0, dis
  765. abled.
  766. 0009ffff] could not be reserve-sh: syntax error: unexpected "("
  767. Lakka:~ # [ 0.982646] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, dis
  768. abled.
  769. stem 00:08: [mem 0x00100000-0x7fedffff] could not be reser-sh: syntax error: unexpected "("
  770. Lakka:~ # [ 0.982703] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, dis
  771. abled.
  772. -sh: syntax error: unexpected "("
  773. Lakka:~ # [ 0.982761] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, dis
  774. abled.
  775. -sh: syntax error: unexpected "("
  776. Lakka:~ # [ 0.982818] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0, dis
  777. abled.
  778. -sh: syntax error: unexpected "("
  779. Lakka:~ # [ 0.982875] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0, dis
  780. abled.
  781. -sh: syntax error: unexpected "("
  782. Lakka:~ # [ 0.982933] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, dis
  783. abled.
  784. -sh: syntax error: unexpected "("
  785. Lakka:~ # [ 0.982990] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, dis
  786. abled.
  787. -sh: syntax error: unexpected "("
  788. Lakka:~ # [ 0.983047] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, dis
  789. abled.
  790. -sh: syntax error: unexpected "("
  791. Lakka:~ # [ 0.983105] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0, disabled.
  792. -sh: syntax error: unexpected "("
  793. Lakka:~ # [ 0.983162] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0, disabled.
  794. 4 ns-sh: syntax error: unexpected "("
  795. Lakka:~ # [ 0.983230] ACPI: Enabled 1 GPEs in block 00 to 1F
  796. -sh: missing ]
  797. Lakka:~ # [ 0.983386] vgaarb: setting as boot device: PCI:0000:02:00.0
  798. -sh: missing ]
  799. Lakka:~ # [ 0.983387] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,o
  800. wns=io+mem,locks=none
  801. 84] -sh: missing ]
  802. Lakka:~ # [ 0.983388] vgaarb: loaded
  803. -sh: missing ]
  804. winLakka:~ # [ 0.983388] vgaarb: bridge control possible 0000:02:00.0
  805. 0-sh: missing ]
  806. Lakka:~ # [ 0.983444] SCSI subsystem initialized
  807. e-sh: missing ]
  808. Lakka:~ # [ 0.983486] libata version 3.00 loaded.
  809. -sh: missing ]
  810. Lakka:~ # [ 0.983505] ACPI: bus type USB registered
  811. -sh: missing ]
  812. Lakka:~ # [ 0.983524] usbcore: registered new interface driver usbfs
  813. -sh: missing ]
  814. Lakka:~ # [ 0.983532] usbcore: registered new interface driver hub
  815. 0-sh: missing ]
  816. Lakka:~ # [ 0.983542] usbcore: registered new device driver usb
  817. -sh: missing ]
  818. Lakka:~ # [ 0.983561] pps_core: LinuxPPS API ver. 1 registered
  819. 0000:00:-sh: missing ]
  820. Lakka:~ # [ 0.983562] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rod
  821. olfo Giometti <giometti@linux.it>
  822. ge-sh: syntax error: unexpected newline
  823. Lakka:~ # [ 0.983564] PTP clock support registered
  824. -sh: missing ]
  825. Lakka:~ # [ 0.983598] wmi: Mapper loaded
  826. -0x9f-sh: missing ]
  827. Lakka:~ # [ 0.983612] Advanced Linux Sound Architecture Driver Initialized.
  828. --sh: missing ]
  829. Lakka:~ # [ 0.983613] PCI: Using ACPI for IRQ routing
  830. : -sh: missing ]
  831. Lakka:~ # [ 0.985036] PCI: pci_cache_line_size set to 64 bytes
  832. -sh: missing ]
  833. Lakka:~ # [ 0.985045] pci 0000:00:01.0: can't claim BAR 2 [io 0x1d00-0x1dff]
  834. : no compatible bridge window
  835. > [ 0.985070] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
  836. ind> [ 0.985072] e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff]
  837. > [ 0.985248] HPET: 3 timers in total, 0 timers will be used for per-cpu time
  838. r
  839. 0:0> [ 0.985380] clocksource: Switched to clocksource hpet
  840. > [ 0.985440] pnp: PnP ACPI init
  841. > [ 0.985548] system 00:00: [io 0x1000-0x107f] has been reserved
  842. io > [ 0.985549] system 00:00: [io 0x1080-0x10ff] has been reserved
  843. > [ 0.985550] system 00:00: [io 0x1400-0x147f] has been reserved
  844. > [ 0.985551] system 00:00: [io 0x1480-0x14ff] has been reserved
  845. esour> [ 0.985553] system 00:00: [io 0x1800-0x187f] has been reserved
  846. > [ 0.985554] system 00:00: [io 0x1880-0x18ff] has been reserved
  847. > [ 0.985555] system 00:00: [io 0x2000-0x207f] has been reserved
  848. > [ 0.985556] system 00:00: [io 0x2080-0x20ff] has been reserved
  849. > [ 0.985559] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  850. > [ 0.985619] system 00:01: [io 0x04d0-0x04d1] has been reserved
  851. > [ 0.985621] system 00:01: [io 0x0800-0x0805] has been reserved
  852. > [ 0.985622] system 00:01: [io 0x0290-0x030f] could not be reserved
  853. > [ 0.985623] system 00:01: [io 0x0290-0x0297] has been reserved
  854. > [ 0.985625] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  855. > [ 0.985674] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  856. > [ 0.985808] pnp 00:03: [dma 2]
  857. > [ 0.985831] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
  858. > [ 0.986038] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
  859. s> [ 0.986387] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
  860. > [ 0.986491] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (acti
  861. ve)
  862. > [ 0.986973] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
  863. 00:0> [ 0.986974] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  864. 1 > [ 0.987046] system 00:08: [mem 0x000f0000-0x000fffff] could not be reserved
  865. d> [ 0.987047] system 00:08: [mem 0xfeff0000-0xfeff00ff] has been reserved
  866. > [ 0.987048] system 00:08: [mem 0x7fee0000-0x7fefffff] could not be reserved
  867. 0> [ 0.987050] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
  868. c> [ 0.987051] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
  869. > [ 0.987052] system 00:08: [mem 0x00100000-0x7fedffff] could not be reserved
  870. > [ 0.987054] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
  871. [ > [ 0.987055] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
  872. she> [ 0.987058] system 00:08: [mem 0xfefff000-0xfeffffff] has been reserved
  873. > [ 0.987059] system 00:08: [mem 0xfff80000-0xfff80fff] has been reserved
  874. > [ 0.987060] system 00:08: [mem 0xfff90000-0xfffbffff] has been reserved
  875. sh> [ 0.987061] system 00:08: [mem 0xfffed000-0xfffeffff] has been reserved
  876. > [ 0.987063] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
  877. > [ 0.987069] pnp: PnP ACPI: found 9 devices
  878. > [ 0.993452] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_
  879. idle_ns: 2085701024 ns
  880. > [ 0.993476] pci 0000:00:01.0: BAR 2: assigned [io 0xc000-0xc0ff]
  881. er> [ 0.993480] pci 0000:00:04.0: PCI bridge to [bus 01]
  882. 43> [ 0.993482] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
  883. > [ 0.993484] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
  884. > [ 0.993486] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff pr
  885. ef]
  886. > [ 0.993490] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pr
  887. ef]
  888. > [ 0.993492] pci 0000:00:09.0: PCI bridge to [bus 02]
  889. > [ 0.993493] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
  890. > [ 0.993495] pci 0000:00:09.0: bridge window [mem 0xfb000000-0xfcffffff]
  891. > [ 0.993497] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xe7ffffff 64
  892. bit pref]
  893. ed > [ 0.993499] pci 0000:00:0b.0: PCI bridge to [bus 03]
  894. > [ 0.993500] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
  895. > [ 0.993502] pci 0000:00:0b.0: bridge window [mem 0xfdd00000-0xfddfffff]
  896. > [ 0.993503] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff 64
  897. bit pref]
  898. > [ 0.993505] pci 0000:00:0c.0: PCI bridge to [bus 04]
  899. > [ 0.993506] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
  900. > [ 0.993508] pci 0000:00:0c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
  901. > [ 0.993510] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff 64
  902. bit pref]
  903. > [ 0.993513] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
  904. > [ 0.993514] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
  905. > [ 0.993515] pci_bus 0000:00: resource 6 [io 0x8000-0xffff window]
  906. > [ 0.993516] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df window]
  907. > [ 0.993517] pci_bus 0000:00: resource 8 [io 0x1c00-0x1c80 window]
  908. > [ 0.993519] pci_bus 0000:00: resource 9 [mem 0xfec80000-0xfecbffff window]
  909. > [ 0.993520] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
  910. > [ 0.993521] pci_bus 0000:00: resource 11 [mem 0x80000000-0xefffffff window]
  911. Butto> [ 0.993522] pci_bus 0000:00: resource 12 [mem 0xf4000000-0xfe02ffff window]
  912. > [ 0.993523] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
  913. PI: T> [ 0.993525] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
  914. p> [ 0.993526] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff pref]
  915. > [ 0.993527] pci_bus 0000:01: resource 4 [io 0x0000-0x03af window]
  916. at > [ 0.993528] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window]
  917. n> [ 0.993529] pci_bus 0000:01: resource 6 [io 0x8000-0xffff window]
  918. > [ 0.993530] pci_bus 0000:01: resource 7 [io 0x03b0-0x03df window]
  919. > [ 0.993531] pci_bus 0000:01: resource 8 [io 0x1c00-0x1c80 window]
  920. pt Li> [ 0.993532] pci_bus 0000:01: resource 9 [mem 0xfec80000-0xfecbffff window]
  921. 8 > [ 0.993533] pci_bus 0000:01: resource 10 [mem 0x000a0000-0x000bffff window]
  922. > [ 0.993535] pci_bus 0000:01: resource 11 [mem 0x80000000-0xefffffff window]
  923. > [ 0.993536] pci_bus 0000:01: resource 12 [mem 0xf4000000-0xfe02ffff window]
  924. > [ 0.993537] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
  925. > [ 0.993538] pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff]
  926. s me> [ 0.993540] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pr
  927. ef]
  928. > [ 0.993541] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
  929. > [ 0.993542] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
  930. > [ 0.993543] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pr
  931. ef]
  932. > [ 0.993544] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
  933. 0
  934. [ > [ 0.993545] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
  935. > [ 0.993546] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pr
  936. ef]
  937. 2.36> [ 0.993612] NET: Registered protocol family 2
  938. 080> [ 0.993725] TCP established hash table entries: 16384 (order: 5, 131072 byt
  939. es)
  940. 00> [ 0.993778] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  941. > [ 0.993868] TCP: Hash tables configured (established 16384 bind 16384)
  942. > [ 0.993921] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  943. drm> [ 0.993935] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  944. > [ 0.993992] NET: Registered protocol family 1
  945. p quer> [ 0.994149] RPC: Registered named UNIX socket transport module.
  946. > [ 0.994149] RPC: Registered udp transport module.
  947. > [ 0.994150] RPC: Registered tcp transport module.
  948. > [ 0.994150] RPC: Registered tcp NFSv4.1 backchannel transport module.
  949. > [ 0.994391] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
  950. > [ 1.065691] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
  951. > [ 1.065807] pci 0000:00:00.0: Found enabled HT MSI Mapping
  952. 000:> [ 1.065849] pci 0000:00:00.0: Found enabled HT MSI Mapping
  953. > [ 1.065896] pci 0000:00:00.0: Found enabled HT MSI Mapping
  954. devic> [ 1.065942] pci 0000:00:00.0: Found enabled HT MSI Mapping
  955. > [ 1.065987] pci 0000:00:00.0: Found enabled HT MSI Mapping
  956. > [ 1.066035] pci 0000:00:00.0: Found enabled HT MSI Mapping
  957. > [ 1.066085] pci 0000:00:00.0: Found enabled HT MSI Mapping
  958. a_nv 0> [ 1.066137] pci 0000:00:00.0: Found enabled HT MSI Mapping
  959. > [ 1.066156] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c
  960. 0000-0x000dffff]
  961. > [ 1.066162] PCI: CLS 64 bytes, default 64
  962. > [ 1.104971] LVT offset 1 assigned for vector 0x400
  963. > [ 1.104981] IBS: LVT offset 1 assigned
  964. > [ 1.105050] perf: AMD IBS detected (0x0000001f)
  965. > [ 1.105217] Scanning for low memory corruption every 60 seconds
  966. > [ 1.105661] workingset: timestamp_bits=40 max_order=19 bucket_order=0
  967. > [ 1.107383] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  968. > [ 1.107542] NFS: Registering the id_resolver key type
  969. > [ 1.107547] Key type id_resolver registered
  970. > [ 1.107547] Key type id_legacy registered
  971. > [ 1.107550] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  972. > [ 1.108536] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
  973. 250)
  974. > [ 1.108538] io scheduler noop registered
  975. > [ 1.108581] io scheduler cfq registered (default)
  976. > [ 1.108869] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C
  977. :00/input/input0
  978. > [ 1.108872] ACPI: Power Button [PWRB]
  979. > [ 1.108930] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/i
  980. nput1
  981. > [ 1.108931] ACPI: Power Button [PWRF]
  982. 2.6> [ 1.109219] ACPI: Invalid passive threshold
  983. > [ 1.109376] thermal LNXTHERM:00: registered as thermal_zone0
  984. > [ 1.109377] ACPI: Thermal Zone [THRM] (40 C)
  985. Intel> [ 1.109487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  986. > [ 1.129976] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16
  987. 550A
  988. Dr> [ 1.150537] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is
  989. a 16550A
  990. > [ 1.150751] Linux agpgart interface v0.103
  991. > [ 1.150776] [drm] Initialized
  992. 2> [ 1.150787] [drm] radeon kernel modesetting enabled.
  993. rat> [ 1.150853] [drm] amdgpu kernel modesetting enabled.
  994. two> [ 1.151081] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
  995. 0> [ 1.151246] nouveau 0000:02:00.0: NVIDIA GF108 (0c1080a1)
  996. ) 10 G> [ 1.277981] nouveau 0000:02:00.0: bios: version 70.08.29.00.01
  997. > [ 1.278656] nouveau 0000:02:00.0: fb: 512 MiB DDR3
  998. > [ 2.115451] tsc: Refined TSC clocksource calibration: 2812.962 MHz
  999. > [ 2.115457] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x288c15
  1000. 7769b, max_idle_ns: 440795326313 ns
  1001. > [ 2.365838] [TTM] Zone kernel: Available graphics memory: 1010874 kiB
  1002. 2.642> [ 2.365840] [TTM] Initializing pool allocator
  1003. > [ 2.365843] [TTM] Initializing DMA pool allocator
  1004. Inte> [ 2.365855] nouveau 0000:02:00.0: DRM: VRAM: 512 MiB
  1005. a1:> [ 2.365856] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
  1006. > [ 2.365859] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
  1007. > [ 2.365860] nouveau 0000:02:00.0: DRM: DCB version 4.0
  1008. th > [ 2.365862] nouveau 0000:02:00.0: DRM: DCB outp 00: 01000302 00020030
  1009. > [ 2.365864] nouveau 0000:02:00.0: DRM: DCB outp 01: 02000300 00000000
  1010. > [ 2.365865] nouveau 0000:02:00.0: DRM: DCB outp 02: 08011392 00020020
  1011. > [ 2.365866] nouveau 0000:02:00.0: DRM: DCB outp 03: 04022310 00000000
  1012. > [ 2.365867] nouveau 0000:02:00.0: DRM: DCB conn 00: 00001030
  1013. > [ 2.365868] nouveau 0000:02:00.0: DRM: DCB conn 01: 00002161
  1014. > [ 2.365869] nouveau 0000:02:00.0: DRM: DCB conn 02: 00000200
  1015. > [ 2.366862] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  1016. ] e> [ 2.366863] [drm] Driver supports precise vblank timestamp query.
  1017. ehci-p> [ 2.409207] nouveau 0000:02:00.0: DRM: MM: using COPY0 for buffer copies
  1018. USB > [ 2.541703] nouveau 0000:02:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo
  1019. ffff88007c2db800
  1020. > [ 2.541804] fbcon: nouveaufb (fb0) is primary device
  1021. > [ 2.618925] Console: switching to colour frame buffer device 240x67
  1022. > [ 2.621490] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
  1023. > [ 2.635462] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on mi
  1024. nor 0
  1025. m 0x> [ 2.637435] brd: module loaded
  1026. > [ 2.637459] loop: module loaded
  1027. > [ 2.638419] nbd: registered device at major 43
  1028. > [ 2.639614] usbcore: registered new interface driver rtsx_usb
  1029. 76] > [ 2.639626] Loading iSCSI transport class v2.0-870.
  1030. 3.247> [ 2.639714] iscsi: registered transport (tcp)
  1031. > [ 2.639715] megasas: 06.811.02.00-rc1
  1032. PS/2 > [ 2.639888] sata_nv 0000:00:08.0: version 3.5
  1033. > [ 2.640099] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
  1034. d, if> [ 2.640429] scsi host0: sata_nv
  1035. with> [ 2.640512] scsi host1: sata_nv
  1036. > [ 2.640542] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
  1037. > [ 2.640543] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
  1038. > [ 2.640708] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
  1039.  
  1040. [ > [ 2.640916] scsi host2: sata_nv
  1041. > [ 2.640979] scsi host3: sata_nv
  1042. > [ 2.641007] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
  1043. nF> [ 2.641008] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
  1044. > [ 2.641073] pata_amd 0000:00:06.0: version 0.4.1
  1045. > [ 2.641536] scsi host4: pata_amd
  1046. > [ 2.641605] scsi host5: pata_amd
  1047. rre Os> [ 2.641633] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
  1048. > [ 2.641634] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
  1049. > [ 2.641835] tun: Universal TUN/TAP device driver, 1.6
  1050. > [ 2.641836] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1051. > [ 2.641910] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
  1052. > [ 2.641927] Atheros(R) L2 Ethernet Driver - version 2.2.3
  1053. > [ 2.641927] Copyright (c) 2007 Atheros Corporation.
  1054. =0x> [ 2.641980] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
  1055. > [ 2.642018] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
  1056. > [ 2.642028] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  1057. > [ 2.642029] e100: Copyright(c) 1999-2006 Intel Corporation
  1058. n> [ 2.642040] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAP
  1059. I
  1060. sole: network logging started
  1061. [ 3.250389] rtc_cmos 00:02: setting system> [ 2.642041] e1000: Copyright (c) 1999-2006 Intel Corporation.
  1062. > [ 2.642053] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  1063. in> [ 2.642053] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  1064. > [ 2.642067] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  1065. > [ 2.642067] igb: Copyright (c) 2007-2014 Intel Corporation.
  1066. > [ 2.642099] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version
  1067. 4.4.0-k
  1068. > [ 2.642100] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
  1069. > [ 2.642139] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NA
  1070. PI
  1071. 00
  1072. [> [ 2.642139] ixgb: Copyright (c) 1999-2008 Intel Corporation.
  1073. A M> [ 2.642147] jme: JMicron JMC2XX ethernet driver version 1.0.8
  1074. > [ 2.642166] sky2: driver version 1.30
  1075. > [ 2.642186] forcedeth: Reverse Engineered nForce ethernet driver. Version 0
  1076. .64.
  1077. 1] sd> [ 2.642345] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
  1078. > [ 2.962837] ata1: SATA link down (SStatus 0 SControl 300)
  1079. > [ 2.962842] ata3: SATA link down (SStatus 0 SControl 300)
  1080. rt D> [ 3.128895] clocksource: Switched to clocksource tsc
  1081. 58] > [ 3.175969] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 0
  1082. 0:22:68:6f:7a:b5
  1083. 2> [ 3.175972] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
  1084. )
  1085. [> [ 3.176085] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1086. d > [ 3.176085] ehci-pci: EHCI PCI platform driver
  1087. > [ 3.176215] ehci-pci 0000:00:02.1: EHCI Host Controller
  1088. ad-on> [ 3.176221] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus num
  1089. ber 1
  1090. > [ 3.176228] ehci-pci 0000:00:02.1: debug port 1
  1091. > [ 3.176242] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
  1092. rand> [ 3.176260] ehci-pci 0000:00:02.1: irq 21, io mem 0xfe02e000
  1093. Mass > [ 3.188804] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
  1094. e 1-> [ 3.189092] hub 1-0:1.0: USB hub found
  1095. spe> [ 3.189103] hub 1-0:1.0: 10 ports detected
  1096. > [ 3.189319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1097. pati> [ 3.189327] ohci-pci: OHCI PCI platform driver
  1098. > [ 3.189455] ohci-pci 0000:00:02.0: OHCI PCI host controller
  1099. > [ 3.189460] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus num
  1100. ber 2
  1101. > [ 3.189488] ohci-pci 0000:00:02.0: irq 22, io mem 0xfe02f000
  1102. > [ 3.247673] hub 2-0:1.0: USB hub found
  1103. > [ 3.247680] hub 2-0:1.0: 10 ports detected
  1104. > [ 3.247837] uhci_hcd: USB Universal Host Controller Interface driver
  1105. > [ 3.247876] usbcore: registered new interface driver uas
  1106. > [ 3.247892] usbcore: registered new interface driver usb-storage
  1107. > [ 3.247919] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  1108. > [ 3.247920] i8042: PNP: PS/2 appears to have AUX port disabled, if this is
  1109. incorrect please boot with i8042.nopnp
  1110. > [ 3.248079] serio: i8042 KBD port at 0x60,0x64 irq 1
  1111. > [ 3.248184] mousedev: PS/2 mouse device common for all mice
  1112. > [ 3.248358] rtc_cmos 00:02: RTC can wake from S4
  1113. > [ 3.248495] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  1114. > [ 3.248532] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hp
  1115. et irqs
  1116. .> [ 3.248543] i2c /dev entries driver
  1117. e: 2> [ 3.248858] i2c i2c-12: nForce2 SMBus adapter at 0x1c00
  1118. > [ 3.248893] i2c i2c-13: nForce2 SMBus adapter at 0x1c40
  1119. > [ 3.248964] sdhci: Secure Digital Host Controller Interface driver
  1120. 0] sd> [ 3.248965] sdhci: Copyright(c) Pierre Ossman
  1121. > [ 3.248987] No iBFT detected.
  1122. done> [ 3.248997] hidraw: raw HID events driver (C) Jiri Kosina
  1123. > [ 3.249193] usbcore: registered new interface driver usbhid
  1124. P > [ 3.249193] usbhid: USB HID core driver
  1125. BCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ> [ 3.249418] NET: Registered protocol family 10
  1126. 2.077> [ 3.249611] NET: Registered protocol family 17
  1127. > [ 3.249630] Key type dns_resolver registered
  1128. > [ 3.249716] microcode: microcode updated early to new patch_level=0x010000c
  1129. 7
  1130. [ 1> [ 3.249736] microcode: CPU0: patch_level=0x010000c7
  1131. quest> [ 3.249744] microcode: CPU1: patch_level=0x010000c7
  1132. > [ 3.249769] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsne
  1133. t.co.uk>, Peter Oruba
  1134. > [ 3.250170] Btrfs loaded, crc32c=crc32c-generic
  1135. > [ 3.250353] console [netcon0] enabled
  1136. > [ 3.250354] netconsole: network logging started
  1137. > [ 3.250389] rtc_cmos 00:02: setting system clock to 2017-11-14 01:44:04 UTC
  1138. (1510623844)
  1139. > [ 3.250420] powernow_k8: This CPU is not supported anymore, using acpi-cpuf
  1140. req instead.
  1141. > [ 3.250500] ALSA device list:
  1142. D 1
  1143. [ > [ 3.250501] No soundcards found.
  1144. > [ 3.271186] input: AT Translated Set 2 keyboard as /devices/platform/i8042/
  1145. serio0/input/input2
  1146. 3] A> [ 3.432161] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1147. > [ 3.434600] ata2.00: ATA-7: TOSHIBA MK1637GSX, DL050J, max UDMA/100
  1148. > [ 3.434602] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  1149. > [ 3.437154] ata2.00: configured for UDMA/100
  1150. : 802> [ 3.437334] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK1637GS 0J
  1151. PQ: 0 ANSI: 5
  1152. B 8> [ 3.472314] sd 1:0:0:0: Attached scsi generic sg0 type 0
  1153. > [ 3.472330] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/14
  1154. 9 GiB)
  1155. > [ 3.472381] sd 1:0:0:0: [sda] Write Protect is off
  1156. > [ 3.472383] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
  1157. aud> [ 3.472403] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, do
  1158. esn't support DPO or FUA
  1159. -sh: missing ]
  1160. Lakka:~ # [ 3.505172] sda: sda1 sda2
  1161. hdaud-sh: missing ]
  1162. Lakka:~ # [ 3.505558] sd 1:0:0:0: [sda] Attached SCSI disk
  1163. -sh: missing ]
  1164. Lakka:~ # [ 3.508822] usb 1-1: new high-speed USB device number 2 using ehci-
  1165. pci
  1166. ioC0-sh: missing ]
  1167. Lakka:~ # [ 3.795887] ata4: SATA link down (SStatus 0 SControl 300)
  1168. -sh: syntax error: unexpected "("
  1169. Lakka:~ # [ 3.795967] ata6: port disabled--ignoring
  1170. -sh: missing ]
  1171. Lakka:~ # [ 3.799292] Freeing unused kernel memory: 4196K (ffffffff832f0000 -
  1172. ffffffff83709000)
  1173. -sh: syntax error: unexpected "("
  1174. Lakka:~ # [ 3.799295] Write protecting the kernel read-only data: 34816k
  1175. nput-sh: missing ]
  1176. Lakka:~ # [ 3.799635] Freeing unused kernel memory: 128K (ffff880001be0000 -
  1177. ffff880001c00000)
  1178. -sh: 47syntax error: unexpected "("
  1179. Lakka:~ # [ 3.803250] Freeing unused kernel memory: 1352K (ffff8800030ae000 -
  1180. ffff880003200000)
  1181. -sh: syntax error: unexpected "("
  1182. Lakka:~ # [ 4.223688] random: fast init done
  1183. -sh: missing ]
  1184. Lakka:~ # [ 4.505712] usb-storage 1-1:1.0: USB Mass Storage device detected
  1185. -sh: missing ]
  1186. Lakka:~ # [ 4.505792] scsi host6: usb-storage 1-1:1.0
  1187. -sh: missing ]
  1188. Lakka:~ # [ 4.858841] usb 2-3: new full-speed USB device number 2 using ohci-
  1189. pci
  1190. -sh: missing ]
  1191. Lakka:~ # [ 4.889671] EXT4-fs (sda1): couldn't mount as ext3 due to feature i
  1192. ncompatibilities
  1193. -sh: syntax error: unexpected "("
  1194. Lakka:~ # [ 4.889865] EXT4-fs (sda1): couldn't mount as ext2 due to feature i
  1195. ncompatibilities
  1196. -sh: syntax error: unexpected "("
  1197. Lakka:~ # [ 4.916476] EXT4-fs (sda1): mounted filesystem with ordered data mo
  1198. de. Opts: (null)
  1199. -sh: syntax error: unexpected "("
  1200. Lakka:~ # [ 5.030393] EXT4-fs (sda2): Mount option "journal_async_commit" inc
  1201. ompatible with ext3
  1202. -sh: syntax error: unexpected "("s/pci00
  1203. Lakka:~ # [ 5.030562] EXT4-fs (sda2): Mount option "journal_async_commit" inc
  1204. ompatible with ext2
  1205. -sh: syntax error: unexpected "("
  1206. Lakka:~ # [ 5.072483] EXT4-fs (sda2): mounted filesystem with ordered data mo
  1207. de. Opts: noauto_da_alloc,journal_async_commit
  1208. AC-sh: PI: syntax error: unexpected "("
  1209. Lakka:~ # [ 5.174632] input: Sony PLAYSTATION(R)3 Controller as /devices/pci0
  1210. 000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:054C:0268.0001/input/input3
  1211. .6405-sh: syntax error: unexpected "("
  1212. Lakka:~ # [ 5.174772] sony 0003:054C:0268.0001: input,hiddev0,hidraw0: USB HI
  1213. D v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:02.0-3/input0
  1214. -sh: syntax error: unexpected "("
  1215. Lakka:~ # [ 5.604262] scsi 6:0:0:0: Direct-Access USB DISK 2.0
  1216. PMAP PQ: 0 ANSI: 4
  1217. mis-sh: missing ]
  1218. Lakka:~ # [ 5.604596] sd 6:0:0:0: Attached scsi generic sg1 type 0
  1219. nk [AP-sh: missing ]
  1220. Lakka:~ # [ 5.606121] sd 6:0:0:0: [sdb] 31277056 512-byte logical blocks: (16
  1221. .0 GB/14.9 GiB)
  1222. -sh:-sh: syntax error: unexpected "("
  1223. Lakka:~ # [ 5.608619] sd 6:0:0:0: [sdb] Write Protect is off
  1224. -sh: missing ]
  1225. Lakka:~ # [ 5.608623] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
  1226. .641007] ata3: SATA max -sh: missing ]
  1227. Lakka:~ # [ 5.611118] sd 6:0:0:0: [sdb] No Caching mode page found
  1228. -sh: missing ]
  1229. Lakka:~ # [ 5.611121] sd 6:0:0:0: [sdb] Assuming drive cache: write through
  1230. 4
  1231. -sh: missing ]
  1232. Lakka:~ # [ 7.696821] sdb: sdb1 sdb2
  1233. -sh: missing ]
  1234. 2Lakka:~ # [ 7.703790] sd 6:0:0:0: [sdb] Attached SCSI removable disk
  1235. c-sh: missing ]
  1236. Lakka:~ # [ 8.269069] random: crng init done
  1237. -sh: missing ]
  1238. Lakka:~ # [ 12.077558] systemd[1]: systemd 232 running in system mode. (-PAM -
  1239. AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNU
  1240. TLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  1241. -sh: syntax error: unexpected "("
  1242. Lakka:~ # [ 12.077666] systemd[1]: Detected architecture x86-64.
  1243. ng-sh: missing ]
  1244. Lakka:~ # [ 12.077784] systemd[1]: Set hostname to <Lakka>.
  1245. -sh: can't open Lakka: no such file
  1246. Lakka:~ # [ 12.126129] systemd[1]: Listening on RPCbind Server Activation Sock
  1247. et.
  1248. -sh: missing ]
  1249. Lakka:~ # [ 12.126209] systemd[1]: Started Dispatch Password Requests to Conso
  1250. le Directory Watch.
  1251. 0.-sh: missing ]
  1252. Lakka:~ # [ 12.126241] systemd[1]: Listening on udev Control Socket.
  1253. -sh: missing ]
  1254. Lakka:~ # [ 12.126273] systemd[1]: Listening on Journal Socket.
  1255. 2.-sh: missing ]
  1256. Lakka:~ # [ 12.126487] systemd[1]: Created slice System Slice.
  1257. d-sh: missing ]
  1258. Lakka:~ # [ 12.127043] systemd[1]: Mounting Variable Directory...
  1259. -sh: missing ]
  1260. Lakka:~ # [ 12.127086] systemd[1]: dev-hugepages.mount: Couldn't determine res
  1261. ult for ConditionVirtualization=!private-users, assuming failed: No such file or
  1262. directory
  1263. > [ 12.238353] systemd-journald[215]: Received request to flush runtime journa
  1264. l from PID 1
  1265. > [ 12.846420] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
  1266. > [ 12.846431] snd_hda_intel 0000:00:05.0: Disabling MSI
  1267. ecte> [ 12.855233] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
  1268. > [ 12.855246] snd_hda_intel 0000:02:00.1: Disabling MSI
  1269. 2.> [ 12.855257] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
  1270. > [ 13.442072] forcedeth 0000:00:07.0 eth0: MSI enabled
  1271. > [ 13.471641] 8021q: 802.1Q VLAN Support v1.8
  1272. > [ 13.532390] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708B 8-Ch: lin
  1273. e_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
  1274. > [ 13.532393] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0
  1275. x0/0x0)
  1276. > [ 13.532394] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0
  1277. x0)
  1278. > [ 13.532395] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
  1279. > [ 13.532396] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
  1280. > [ 13.532397] snd_hda_codec_via hdaudioC0D0: inputs:
  1281. > [ 13.532398] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
  1282. > [ 13.532400] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
  1283. > [ 13.532401] snd_hda_codec_via hdaudioC0D0: Line=0x1b
  1284. > [ 13.532402] snd_hda_codec_via hdaudioC0D0: CD=0x1f
  1285. > [ 14.446686] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/
  1286. sound/card0/input8
  1287. > [ 14.447326] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0
  1288. /sound/card0/input9
  1289. > [ 14.447412] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/soun
  1290. d/card0/input10
  1291. error: u> [ 14.447694] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/
  1292. sound/card0/input11
  1293. > [ 14.447757] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:0
  1294. 0:05.0/sound/card0/input12
  1295. > [ 14.569229] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts
  1296. : (null)
  1297. ght (> [ 14.876136] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:
  1298. 09.0/0000:02:00.1/sound/card1/input4
  1299. ab> [ 14.876189] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:
  1300. 09.0/0000:02:00.1/sound/card1/input5
  1301. xgbe: > [ 14.876233] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:
  1302. 09.0/0000:02:00.1/sound/card1/input6
  1303. l(R> [ 14.876278] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:
  1304. 09.0/0000:02:00.1/sound/card1/input7
  1305. 39] ix> Lakka:~ #
  1306. > Lakka:~ # [ 2.640099] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
  1307. > -sh: missing ]
  1308. 2.64> Lakka:~ # [ 2.640429] scsi host0: sata_nv
  1309. > -sh: missing ]
  1310. > Lakka:~ # [ 2.640512] scsi host1: sata_nv
  1311. > -sh: missing ]
  1312. > Lakka:~ # [ 2.640542] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd
  1313. 80
  1314. > 0 irq 23
  1315. > -sh: missing ]
  1316. on > Lakka:~ # [ 2.640543] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd
  1317. 80
  1318. > 8 irq 23
  1319. > -sh: missing ]
  1320. > Lakka:~ # [ 2.640708] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
  1321. l 300> -sh: missing ]
  1322. > Lakka:~ # [ 2.640916] scsi host2: sata_nv
  1323. ]> -sh: missing ]
  1324. > Lakka:~ # [ 2.640979] scsi host3: sata_nv
  1325. > -sh: missing ]
  1326. > Lakka:~ # [ 2.641007] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc
  1327. 40
  1328. > 0 irq 23
  1329. > [ 2.641633] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
  1330.  
  1331. ,> -sh: missing ]
  1332. > Lakka:~ # [ 2.641008] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc
  1333. 40
  1334. > 8 irq 23
  1335. mg> -sh: missing ]
  1336. > [ 2.641910] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
  1337. > [ 2.641927] Atheros(R) L2 Ethernet Driver - version 2.2.3
  1338. > Lakka:~ # [ 2.641073] pata_amd 0000:00:06.0: version 0.4.1
  1339. > -sh: missing ]
  1340. > Lakka:~ # [ 2.641536] scsi host4: pata_amd
  1341. > -sh: missing ]
  1342. # [ > Lakka:~ # [ 2.641605] scsi host5: pata_amd
  1343. > -sh: missing ]
  1344. > Lakka:~ # [ 2.641633] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf
  1345. 00
  1346. ssi> 0 irq 14
  1347. kk> [ 2.642018] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
  1348. > [ 2.642028] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  1349. 0:00> -sh: missing ]
  1350. > Lakka:~ # [ 2.641634] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf
  1351. 00
  1352. > 8 irq 15
  1353. > -sh: missing ]
  1354. > Lakka:~ # [ 2.641835] tun: Universal TUN/TAP device driver, 1.6
  1355. > -sh: missing ]
  1356. mem 0> Lakka:~ # [ 2.641836] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com
  1357. >
  1358. > -sh: syntax error: unexpected "("
  1359. > Lakka:~ # [ 2.641910] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.f
  1360. ra
  1361. > nken.de
  1362. > -sh: missing ]
  1363. > Lakka:~ # [ 2.641927] Atheros(R) L2 Ethernet Driver - version 2.2.3
  1364. > -sh: syntax error: unexpected "("
  1365.  
  1366. -sh: > Lakka:~ # [ 2.641927] Copyright (c) 2007 Atheros Corporation.
  1367. > -sh: syntax error: unexpected "("
  1368. 3.1> Lakka:~ # [ 2.641980] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
  1369. > [ 2.642100] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
  1370. > -sh: syntax error: unexpected "("
  1371. > Lakka:~ # [ 2.642018] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2
  1372. 00
  1373. : miss> 5-7-29)
  1374. > -sh: syntax error: unexpected "("
  1375. > Lakka:~ # [ 2.642028] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  1376. > -sh: syntax error: unexpected "("
  1377. > [ 2.642345] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
  1378. > [ 2.962837] ata1: SATA link down (SStatus 0 SControl 300)
  1379. a:~ #> Lakka:~ # [ 2.642029] e100: Copyright(c) 1999-2006 Intel Corporation
  1380. > -sh: syntax error: unexpected "("
  1381. > Lakka:~ # [ 2.642040] e1000: Intel(R) PRO/1000 Network Driver - version 7.3
  1382. .2
  1383. > 1-k8-NAPI
  1384. > -sh: syntax error: unexpected "("
  1385. > Lakka:~ # [ 2.642041] e1000: Copyright (c) 1999-2006 Intel Corporation.
  1386. inter> -sh: syntax error: unexpected "("
  1387. Lak> [ 3.175969] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 0
  1388. 0:22:68:6f:7a:b5
  1389. > [ 3.175972] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
  1390. > [ 3.176085] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1391. > Lakka:~ # [ 2.642053] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  1392. > -sh: syntax error: unexpected "("
  1393. > Lakka:~ # [ 2.642053] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  1394. > -sh: syntax error: unexpected "("
  1395. > Lakka:~ # [ 2.642067] igb: Intel(R) Gigabit Ethernet Network Driver - versi
  1396. on
  1397. > 5.4.0-k
  1398. > -sh: syntax error: unexpected "("
  1399. 0> Lakka:~ # [ 2.642067] igb: Copyright (c) 2007-2014 Intel Corporation.
  1400. > -sh: syntax error: unexpected "("
  1401. > Lakka:~ # [ 2.642099] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
  1402. -
  1403. 484> version 4.4.0-k
  1404. > -sh: syntax error: unexpected "("
  1405. a> Lakka:~ # [ 2.642100] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
  1406. > -sh: syntax error: unexpected "("
  1407. ]> Lakka:~ # [ 2.642139] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0
  1408. .1
  1409. > 35-k2-NAPI
  1410. > -sh: syntax error: unexpected "("
  1411. 9865> Lakka:~ # [ 2.642139] ixgb: Copyright (c) 1999-2008 Intel Corporation.
  1412. > -sh: syntax error: unexpected "("
  1413. > Lakka:~ # [ 2.642147] jme: JMicron JMC2XX ethernet driver version 1.0.8
  1414. 24854> -sh: missing ]
  1415. > Lakka:~ # [ 2.642166] sky2: driver version 1.30
  1416. > -sh: missing ]
  1417. > Lakka:~ # [ 2.642186] forcedeth: Reverse Engineered nForce ethernet driver.
  1418. V
  1419. 2):> ersion 0.64.
  1420. file> -sh: missing ]
  1421. ord> Lakka:~ # [ 2.642345] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
  1422. 3> -sh: missing ]
  1423. > Lakka:~ # [ 2.962837] ata1: SATA link down (SStatus 0 SControl 300)
  1424. ire> -sh: syntax error: unexpected "("
  1425. B DISK 2.> Lakka:~ # [ 2.962842] ata3: SATA link down (SStatus 0 SControl 300)
  1426. 2c i2> -sh: syntax error: unexpected "("
  1427. > Lakka:~ # [ 3.128895] clocksource: Switched to clocksource tsc
  1428. se: 23> -sh: missing ]
  1429. > Lakka:~ # [ 3.175969] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @
  1430. 0
  1431. > , addr 00:22:68:6f:7a:b5
  1432. > -sh: missing ]
  1433. > Lakka:~ # [ 3.175972] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim ms
  1434. i
  1435. > desc-v3
  1436. > -sh: missing ]
  1437. > Lakka:~ # [ 3.176085] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) D
  1438. ri
  1439. > ver
  1440. > -sh: syntax error: unexpected "("
  1441. > [ 3.248997] hidraw: raw HID events driver (C) Jiri Kosina
  1442. > [ 3.249193] usbcore: registered new interface driver usbhid
  1443. > Lakka:~ # [ 3.176085] ehci-pci: EHCI PCI platform driver
  1444. > -sh: missing ]
  1445. > Lakka:~ # [ 3.176215] ehci-pci 0000:00:02.1: EHCI Host Controller
  1446. > -sh: missing ]
  1447. issi> Lakka:~ # [ 3.176221] ehci-pci 0000:00:02.1: new USB bus registered, assign
  1448. ed
  1449. > bus number 1
  1450. > -sh: missing ]
  1451. > Lakka:~ # [ 3.176228] ehci-pci 0000:00:02.1: debug port 1
  1452. > -sh: missing ]
  1453. > Lakka:~ # [ 3.176242] ehci-pci 0000:00:02.1: cache line size of 64 is not s
  1454. up
  1455. > ported
  1456. > -sh: missing ]
  1457. > Lakka:~ # [ 3.176260] ehci-pci 0000:00:02.1: irq 21, io mem 0xfe02e000
  1458. > -sh: missing ]
  1459. > Lakka:~ # [ 3.188804] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
  1460. > -sh: missing ]
  1461. > Lakka:~ # [ 3.189092] hub 1-0:1.0: USB hub found
  1462. > [ 3.249769] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsne
  1463. t.co.uk>, Peter Oruba
  1464. > [ 3.250170] Btrfs loaded, crc32c=crc32c-generic
  1465. > -sh: missing ]
  1466. > Lakka:~ # [ 3.189103] hub 1-0:1.0: 10 ports detected
  1467. > -sh: missing ]
  1468. > Lakka:~ # [ 3.189319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Drive
  1469. r
  1470. > -sh: syntax error: unexpected "("
  1471. > Lakka:~ # [ 3.189327] ohci-pci: OHCI PCI platform driver
  1472. ch file
  1473. La> -sh: missing ]
  1474. > Lakka:~ # [ 3.189455] ohci-pci 0000:00:02.0: OHCI PCI host controller
  1475. > -sh: missing ]
  1476. > Lakka:~ # [ 3.189460] ohci-pci 0000:00:02.0: new USB bus registered, assign
  1477. ed
  1478. ork> bus number 2
  1479. art> -sh: missing ]
  1480. > Lakka:~ # [ 3.189488] ohci-pci 0000:00:02.0: irq 22, io mem 0xfe02f000
  1481. > -sh: missing ]
  1482. > Lakka:~ # [ 3.247673] hub 2-0:1.0: USB hub found
  1483. > -sh: missing ]
  1484. > Lakka:~ # [ 3.247680] hub 2-0:1.0: 10 ports detected
  1485. ore,> -sh: missing ]
  1486. > Lakka:~ # [ 3.247837] uhci_hcd: USB Universal Host Controller Interface dri
  1487. ve
  1488. mis> r
  1489. > -sh: missing ]
  1490. # > [ 3.437334] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK1637GS 0J
  1491. PQ: 0 ANSI: 5
  1492. > Lakka:~ # [ 3.247876] usbcore: registered new interface driver uas
  1493. put2
  1494. > -sh: missing ]
  1495. ng ]
  1496. > Lakka:~ # [ 3.247892] usbcore: registered new interface driver usb-storage
  1497. > -sh: missing ]
  1498. > Lakka:~ # [ 3.247919] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x
  1499. 64
  1500. X, > irq 1
  1501. > [ 3.472314] sd 1:0:0:0: Attached scsi generic sg0 type 0
  1502. > -sh: missing ]
  1503. > Lakka:~ # [ 3.247920] i8042: PNP: PS/2 appears to have AUX port disabled, i
  1504. f
  1505. akka:> this is incorrect please boot with i8042.nopnp
  1506. > [ 3.472383] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
  1507. > -sh: missing ]
  1508. > Lakka:~ # [ 3.248079] serio: i8042 KBD port at 0x60,0x64 irq 1
  1509. g ]
  1510. > -sh: missing ]
  1511. [ > [ 3.795887] ata4: SATA link down (SStatus 0 SControl 300)
  1512. : m> Lakka:~ # [ 3.248184] mousedev: PS/2 mouse device common for all mice
  1513. > -sh: missing ]
  1514. > Lakka:~ # [ 3.248358] rtc_cmos 00:02: RTC can wake from S4
  1515. > -sh: missing ]
  1516. > Lakka:~ # [ 3.248495] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  1517. > [ 3.799635] Freeing unused kernel memory: 128K (ffff880001be0000 - ffff8800
  1518. 01c00000)
  1519. sd 1:0:> -sh: missing ]
  1520. > Lakka:~ # [ 3.248532] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes
  1521. n
  1522. > vram, hpet irqs
  1523. 1 sd> -sh: missing ]
  1524. 05> [ 4.889865] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompati
  1525. bilities
  1526. USB -sh: missing ]
  1527. Lakka:~ # [ 4.916476] EXT4-fs (sda1): mounted filesystem with ordered data mo
  1528. de. Opts: (null)
  1529. -sh: syntax error: unexpected "("
  1530. Lakka:~ # Lakka:~ # [ 3.248543] i2c /dev entries driver
  1531. --igno-sh: Lakka:~: not found
  1532. Lakka:~ # -sh: missing ]
  1533. -sh: -sh:: not found
  1534. Lakka:~ # [ 5.030562] EXT4-fs (sda2): Mount option "journal_async_commit" inc
  1535. ompatible with ext2
  1536. -sh: syntax error: unexpected "("
  1537. 3Lakka:~ # [ 5.072483] EXT4-fs (sda2): mounted filesystem with ordered data mo
  1538. de. Opts: noauto_da_alloc,journal_async_commit
  1539. -sh: syntax error: unexpected "("
  1540. ffffLakka:~ # Lakka:~ # [ 3.248858] i2c i2c-12: nForce2 SMBus adapter at 0x1c00
  1541. d ker-sh: Lakka:~: not found
  1542. Lakka:~ # [ 5.604262] scsi 6:0:0:0: Direct-Access USB DISK 2.0
  1543. PMAP PQ: 0 ANSI: 4
  1544. -sh: missing ]
  1545. Lakka:~ # -sh: missing ]
  1546. -sh: -sh:: not found
  1547. Lakka:~ # Lakka:~ # [ 3.248893] i2c i2c-13: nForce2 SMBus adapter at 0x1c40
  1548. 4-sh: Lakka:~: not found
  1549. Lakka:~ # -sh: missing ]
  1550. -sh: h-sh:: not found
  1551. Lakka:~ # [ 5.608623] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
  1552. ew f-sh: missing ]
  1553. Lakka:~ # [ 5.611118] sd 6:0:0:0: [sdb] No Caching mode page found
  1554. pci
  1555. > [ 4.889671-sh: missing ]
  1556. Lakka:~ # Lakka:~ # [ 3.248964] sdhci: Secure Digital Host Controller Interfa
  1557. ce driver
  1558.  
  1559. -sh: -sh: Lakka:~: not found
  1560. Lakka:~ # -sh: missing ]
  1561. kka-sh: -sh:: not found
  1562. Lakka:~ # [ 5.611121] sd 6:0:0:0: [sdb] Assuming drive cache: write through
  1563. o fea-sh: missing ]
  1564. Lakka:~ # Lakka:~ # [ 3.248965] sdhci: Copyright(c) Pierre Ossman
  1565. "
  1566. L-sh: Lakka:~: not found
  1567. Lakka:~ # -sh: syntax error: unexpected "("
  1568. -sh: -sh:: not found
  1569. Lakka:~ # Lakka:~ # [ 3.248987] No iBFT detected.
  1570. -sh: Lakka:~: not found
  1571. Lakka:~ # -sh: missing ]
  1572. -sh: -sh:: not found
  1573. Lakka:~ # Lakka:~ # [ 3.248997] hidraw: raw HID events driver (C) Jiri Kosina
  1574. T4-fs-sh: Lakka:~: not found
  1575. Lakka:~ # -sh: syntax error: unexpected "("
  1576. _asy-sh: -sh:: not found
  1577. Lakka:~ # Lakka:~ # [ 3.249193] usbcore: registered new interface driver usbh
  1578. id
  1579. -sh: Lakka:~: not found
  1580. Lakka:~ # -sh: missing ]
  1581. 5.03-sh: -sh:: not found
  1582. Lakka:~ # Lakka:~ # [ 3.249193] usbhid: USB HID core driver
  1583. -sh: Lakka:~: not found
  1584. Lakka:~ # -sh: missing ]
  1585. -sh: -sh:: not found
  1586. Lakka:~ # Lakka:~ # [ 3.249418] NET: Registered protocol family 10
  1587. # [ -sh: Lakka:~: not found
  1588. Lakka:~ # -sh: missing ]
  1589. 3] EX-sh: -sh:: not found
  1590. Lakka:~ # Lakka:~ # [ 3.249611] NET: Registered protocol family 17
  1591. -sh: Lakka:~: not found
  1592. Lakka:~ # -sh: missing ]
  1593. da_a-sh: -sh:: not found
  1594. Lakka:~ # [ 12.077558] systemd[1]: systemd 232 running in system mode. (-PAM -
  1595. AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNU
  1596. TLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  1597. t/in-sh: syntax error: unexpected "("
  1598. Lakka:~ # [ 12.077666] systemd[1]: Detected architecture x86-64.
  1599. .1-sh: missing ]
  1600. Lakka:~ # [ Lakka:~ # [ 3.249630] Key type dns_resolver registered
  1601. H-sh: missing ]
  1602. Lakka:~ # -sh: missing ]
  1603. Joyst-sh: -sh:: not found
  1604. Lakka:~ # Lakka:~ # [ 3.249716] microcode: microcode updated early to new pat
  1605. ch_level=0
  1606. -sh: Lakka:~: not found
  1607. Lakka:~ # x010000c7
  1608. p-sh: x010000c7: not found
  1609. Lakka:~ # -sh: missing ]
  1610.  
  1611. Lakka-sh: -sh:: not found
  1612. Lakka:~ # Lakka:~ # [ 3.249736] microcode: CPU0: patch_level=0x010000c7
  1613. B -sh: Lakka:~: not found
  1614. Lakka:~ # -sh: missing ]
  1615. -sh: -sh:: not found
  1616. Lakka:~ # Lakka:~ # [ 3.249744] microcode: CPU1: patch_level=0x010000c7
  1617. -sh: Lakka:~: not found
  1618. Lakka:~ # -sh: missing ]
  1619. -sh: -sh:: not found
  1620. Lakka:~ # Lakka:~ # [ 3.249769] microcode: Microcode Update Driver: v2.01 <ti
  1621. gran@aivaz
  1622. b] 31-sh: Lakka:~: not found
  1623. Lakka:~ # ian.fsnet.co.uk>, Peter Oruba
  1624. locks-sh: ian.fsnet.co.uk: not found
  1625. Lakka:~ # -sh: can't open tigran@aivazian.fsnet.co.uk: no such file
  1626. > Lakka:~ # [ 3.250170] Btrfs loaded, crc32c=crc32c-generic
  1627. > -sh: missing ]
  1628. ]> Lakka:~ # [ 3.250353] console [netcon0] enabled
  1629. > -sh: missing ]
  1630. > Lakka:~ # [ 3.250354] netconsole: network logging started
  1631. > -sh: missing ]
  1632. > Lakka:~ # [ 3.250389] rtc_cmos 00:02: setting system clock to 2017-11-14 01
  1633. :4
  1634. ng dri> 4:04 UTC (1510623844)
  1635. throug> -sh: syntax error: unexpected "("
  1636. missing ]
  1637. Lakka:~ # [ 7.> Lakka:~ # [ 3.250420] powernow_k8: This CPU is not supported anymore, using
  1638. a
  1639. > cpi-cpufreq instead.
  1640. I remova> -sh: missing ]
  1641. > Lakka:~ # [ 3.250500] ALSA device list:
  1642. om: c> -sh: missing ]
  1643. done
  1644. -> Lakka:~ # [ 3.250501] No soundcards found.
  1645. > -sh: missing ]
  1646. > Lakka:~ # [ 3.271186] input: AT Translated Set 2 keyboard as /devices/platf
  1647. or
  1648. T -U> m/i8042/serio0/input/input2
  1649. > -sh: missing ]
  1650. > Lakka:~ # [ 3.432161] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300
  1651. )
  1652. > -sh: syntax error: unexpected "("
  1653. > Lakka:~ # [ 3.434600] ata2.00: ATA-7: TOSHIBA MK1637GSX, DL050J, max UDMA/1
  1654. 00
  1655. > -sh: missing ]
  1656. > Lakka:~ # [ 3.434602] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (dept
  1657. h
  1658. em> 0/32)
  1659. > -sh: syntax error: unexpected "("
  1660. > Lakka:~ # [ 3.437154] ata2.00: configured for UDMA/100
  1661. st> -sh: missing ]
  1662. arted> Lakka:~ # [ 3.437334] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK16
  1663. 37
  1664. ka:~ #> GS 0J PQ: 0 ANSI: 5
  1665. stem> -sh: missing ]
  1666. > Lakka:~ # [ 3.472314] sd 1:0:0:0: Attached scsi generic sg0 type 0
  1667. syste> -sh: missing ]
  1668. stenin> Lakka:~ # [ 3.472330] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks:
  1669. (1
  1670. > 60 GB/149 GiB)
  1671. > -sh: syntax error: unexpected "("
  1672. > Lakka:~ # [ 3.472381] sd 1:0:0:0: [sda] Write Protect is off
  1673. ssi> -sh: missing ]
  1674. > Lakka:~ # [ 3.472383] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
  1675. > -sh: missing ]
  1676. > Lakka:~ # [ 3.472403] sd 1:0:0:0: [sda] Write cache: enabled, read cache: e
  1677. na
  1678. y
  1679. > bled, doesn't support DPO or FUA
  1680. nald-sh: -sh:: not found
  1681. Lakka:~ # > [ 3.505172] sda: sda1 sda2
  1682. ush -sh: 3.505172]: not found
  1683. Lakka:~ # > [ 3.505558] sd 1:0:0:0: [sda] Attached SCSI disk
  1684. -sh: 3.505558]: not found
  1685. Lakka:~ # > [ 3.508822] usb 1-1: new high-speed USB device number 2 using ehc
  1686. i-pci
  1687. -sh: 3.508822]: not found
  1688. Lakka:~ # > [ 3.795887] ata4: SATA link down (SStatus 0 SControl 300)
  1689. -sh: syntax error: unexpected "("
  1690. Lakka:~ # > [ 3.795967] ata6: port disabled--ignoring
  1691. sn-sh: 3.795967]: not found
  1692. Lakka:~ # > [ 3.799292] Freeing unused kernel memory: 4196K (ffffffff832f0000
  1693. - fffffff
  1694. -sh: syntax error: unexpected "("
  1695. Lakka:~ # f83709000)
  1696. -sh: syntax error: unexpected ")"
  1697. Lakka:~ # > [ 3.799295] Write protecting the kernel read-only data: 34816k
  1698. -sh: 3.799295]: not found
  1699. Lakka:~ # > [ 3.799635] Freeing unused kernel memory: 128K (ffff880001be0000
  1700. - ffff8800
  1701. 3239-sh: syntax error: unexpected "("
  1702. Lakka:~ # 01c00000)
  1703. -sh: syntax error: unexpected ")"
  1704. daLakka:~ # > [ 3.803250] Freeing unused kernel memory: 1352K (ffff8800030ae000
  1705. - ffff880
  1706. -sh: syntax error: unexpected "("
  1707. Lakka:~ # 003200000)
  1708. -sh: syntax error: unexpected ")"
  1709. pLakka:~ # > [ 4.223688] random: fast init done
  1710. -sh: 4.223688]: not found
  1711. Lakka:~ # > [ 4.505712] usb-storage 1-1:1.0: USB Mass Storage device detected
  1712. -sh: 4.505712]: not found
  1713. Lakka:~ # > [ 4.505792] scsi host6: usb-storage 1-1:1.0
  1714. x-sh: 4.505792]: not found
  1715. Lakka:~ # > [ 4.858841] usb 2-3: new full-speed USB device number 2 using ohc
  1716. i-pci
  1717. no-sh: 4.858841]: not found
  1718. Lakka:~ # > [ 4.889671] EXT4-fs (sda1): couldn't mount as ext3 due to feature
  1719. incompati
  1720. -sh: syntax error: unexpected "("
  1721. Lakka:~ # bilities
  1722. -sh: bilities: not found
  1723. Lakka:~ # -sh: missing ]
  1724. -sh: -sh:: not found
  1725. Lakka:~ # Lakka:~ # [ 4.889865] EXT4-fs (sda1): couldn't mount as ext2 due to
  1726. feature i
  1727. ioC0-sh: Lakka:~: not found
  1728. Lakka:~ # ncompatibilities
  1729. -sh: ncompatibilities: not found
  1730. Lakka:~ # -sh: syntax error: unexpected "("
  1731. cod-sh: -sh:: not found
  1732. Lakka:~ # Lakka:~ # [ 4.916476] EXT4-fs (sda1): mounted filesystem with order
  1733. ed data mo
  1734. -sh: Lakka:~: not found
  1735. Lakka:~ # de. Opts: (null)
  1736. -sh: syntax error: unexpected "("
  1737. Lakka:~ # -sh: syntax error: unexpected "("
  1738. ode-sh: -sh:: not found
  1739. Lakka:~ # Lakka:~ # [ 5.030393] EXT4-fs (sda2): Mount option "journal_async_c
  1740. ommit" inc
  1741. /d-sh: Lakka:~: not found
  1742. Lakka:~ # ompatible with ext3
  1743. 00-sh: ompatible: not found
  1744. Lakka:~ # -sh: syntax error: unexpected "("
  1745. -sh: -sh:: not found
  1746. Lakka:~ # Lakka:~ # [ 5.030562] EXT4-fs (sda2): Mount option "journal_async_c
  1747. ommit" inc
  1748.  
  1749. /so-sh: Lakka:~: not found
  1750. Lakka:~ # ompatible with ext2
  1751. [-sh: ompatible: not found
  1752. Lakka:~ # -sh: syntax error: unexpected "("
  1753. -sh: -sh:: not found
  1754. Lakka:~ # Lakka:~ # [ 5.072483] EXT4-fs (sda2): mounted filesystem with order
  1755. ed data mo
  1756. -sh: Lakka:~: not found
  1757. Lakka:~ # de. Opts: noauto_da_alloc,journal_async_commit
  1758. -sh: de.: not found
  1759. Lakka:~ # -sh: syntax error: unexpected "("
  1760. -sh: -sh:: not found
  1761. Lakka:~ # Lakka:~ # [ 5.174632] input: Sony PLAYSTATION(R)3 Controller as /de
  1762. vices/pci0
  1763.  
  1764. 0-sh: Lakka:~: not found
  1765. Lakka:~ # 000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:054C:0268.0001/input/input3
  1766. fil-sh: 000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:054C:0268.0001/input/input3: not found
  1767. Lakka:~ # -sh: syntax error: unexpected "("
  1768. p-sh: -sh:: not found
  1769. Lakka:~ # Lakka:~ # [ 5.174772] sony 0003:054C:0268.0001: input,hiddev0,hidra
  1770. w0: USB HI
  1771. 000:-sh: Lakka:~: not found
  1772. Lakka:~ # D v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:02.0
  1773. -3/input0
  1774. -sh: syntax error: unexpected "("
  1775. Lakka:~ # -sh: syntax error: unexpected "("
  1776. ci0-sh: -sh:: not found
  1777. Lakka:~ # Lakka:~ # [ 5.604262] scsi 6:0:0:0: Direct-Access USB
  1778. DISK 2.0
  1779. -sh: Lakka:~: not found
  1780. HDLakka:~ # PMAP PQ: 0 ANSI: 4
  1781. pcm=8-sh: PMAP: not found
  1782. Lakka:~ # -sh: missing ]
  1783. -sh: pc-sh:: not found
  1784. Lakka:~ # Lakka:~ # [ 5.604596] sd 6:0:0:0: Attached scsi generic sg1 type 0
  1785. -sh: Lakka:~: not found
  1786. Lakka:~ # -sh: missing ]
  1787. -sh: -sh:: not found
  1788. Lakka:~ # Lakka:~ # [ 5.606121] sd 6:0:0:0: [sdb] 31277056 512-byte logical b
  1789. locks: (16
  1790. -sh: Lakka:~: not found
  1791. 1/Lakka:~ # .0 GB/14.9 GiB)
  1792. -sh: syntax error: unexpected ")"
  1793. Lakka:~Lakka:~ # -sh: syntax error: unexpected "("
  1794. -sh: -sh:: not found
  1795. Lakka:~ # Lakka:~ # [ 5.608619] sd 6:0:0:0: [sdb] Write Protect is off
  1796. -sh: Lakka:~: not found
  1797. Lakka:~ # -sh: missing ]
  1798. -sh: -sh:: not found
  1799. Lakka:~ # Lakka:~ # [ 5.608623] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
  1800. -sh: Lakka:~: not found
  1801. Lakka:~ # -sh: missing ]
  1802. -sh: -sh:: not found
  1803. Lakka:~ # Lakka:~ # [ 5.611118] sd 6:0:0:0: [sdb] No Caching mode page found
  1804. -sh: Lakka:~: not found
  1805. Lakka:~ # -sh: missing ]
  1806. -sh: -sh:: not found
  1807. Lakka:~ # Lakka:~ # [ 5.611121] sd 6:0:0:0: [sdb] Assuming drive cache: write
  1808. through
  1809. -sh: Lakka:~: not found
  1810. Lakka:~ # -sh: missing ]
  1811. -sh: -sh:: not found
  1812. Lakka:~ # Lakka:~ # [ 7.696821] sdb: sdb1 sdb2
  1813. -sh: Lakka:~: not found
  1814. Lakka:~ # -sh: missing ]
  1815. -sh: -sh:: not found
  1816. Lakka:~ # Lakka:~ # [ 7.703790] sd 6:0:0:0: [sdb] Attached SCSI removable dis
  1817. k
  1818. -sh: Lakka:~: not found
  1819. Lakka:~ # -sh: missing ]
  1820. -sh: -sh:: not found
  1821. Lakka:~ # Lakka:~ # [ 8.269069] random: crng init done
  1822. -sh: Lakka:~: not found
  1823. Lakka:~ # -sh: missing ]
  1824. -sh: -sh:: not found
  1825. Lakka:~ # Lakka:~ # [ 12.077558] systemd[1]: systemd 232 running in system mod
  1826. e. (-PAM -
  1827. -sh: Lakka:~: not found
  1828. Lakka:~ # AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -G
  1829. CRYPT -GNU
  1830. -sh: AUDIT: not found
  1831. Lakka:~ # TLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  1832. -sh: syntax error: unexpected ")"
  1833. Lakka:~ # -sh: syntax error: unexpected "("
  1834. -sh: -sh:: not found
  1835. Lakka:~ # Lakka:~ # [ 12.077666] systemd[1]: Detected architecture x86-64.
  1836. -sh: Lakka:~: not found
  1837. Lakka:~ # -sh: missing ]
  1838. -sh: -sh:: not found
  1839. Lakka:~ # Lakka:~ # [ 12.077784] systemd[1]: Set hostname to <Lakka>.
  1840. -sh: Lakka:~: not found
  1841. Lakka:~ # -sh: can't open Lakka: no such file
  1842. > Lakka:~ # [ 12.126129] systemd[1]: Listening on RPCbind Server Activation So
  1843. ck
  1844. > et.
  1845. > -sh: missing ]
  1846. > Lakka:~ # [ 12.126209] systemd[1]: Started Dispatch Password Requests to Con
  1847. so
  1848. > le Directory Watch.
  1849. > -sh: missing ]
  1850. > Lakka:~ # [ 12.126241] systemd[1]: Listening on udev Control Socket.
  1851. > -sh: missing ]
  1852. > Lakka:~ # [ 12.126273] systemd[1]: Listening on Journal Socket.
  1853. > -sh: missing ]
  1854. > Lakka:~ # [ 12.126487] systemd[1]: Created slice System Slice.
  1855. > -sh: missing ]
  1856. > Lakka:~ # [ 12.127043] systemd[1]: Mounting Variable Directory...
  1857. > -sh: missing ]
  1858. > Lakka:~ # [ 12.127086] systemd[1]: dev-hugepages.mount: Couldn't determine r
  1859. es
  1860. -sh: -sh:: not found
  1861. Lakka:~ # ult for ConditionVirtualization=!private-users, assuming failed: No su
  1862. ch file or
  1863. -sh: ult: not found
  1864. Lakka:~ # directory
  1865. -sh: directory: not found
  1866. Lakka:~ # > [ 12.238353] systemd-journald[215]: Received request to flush runt
  1867. ime journa
  1868. -sh: 12.238353]: not found
  1869. Lakka:~ # l from PID 1
  1870. -sh: l: not found
  1871. Lakka:~ # > [ 12.846420] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
  1872. -sh: 12.846420]: not found
  1873. Lakka:~ # > [ 12.846431] snd_hda_intel 0000:00:05.0: Disabling MSI
  1874. -sh: 12.846431]: not found
  1875. Lakka:~ # > [ 12.855233] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
  1876. -sh: 12.855233]: not found
  1877. Lakka:~ # > [ 12.855246] snd_hda_intel 0000:02:00.1: Disabling MSI
  1878. -sh: 12.855246]: not found
  1879. Lakka:~ # > [ 12.855257] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo aud
  1880. io client
  1881. -sh: 12.855257]: not found
  1882. Lakka:~ # > [ 13.442072] forcedeth 0000:00:07.0 eth0: MSI enabled
  1883. -sh: 13.442072]: not found
  1884. Lakka:~ # > [ 13.471641] 8021q: 802.1Q VLAN Support v1.8
  1885. -sh: 13.471641]: not found
  1886. Lakka:~ # > [ 13.532390] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708B
  1887. 8-Ch: lin
  1888. -sh: 13.532390]: not found
  1889. Lakka:~ # e_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
  1890. -sh: syntax error: unexpected "("
  1891. Lakka:~ # > [ 13.532393] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0
  1892. /0x0/0x0/0
  1893. -sh: syntax error: unexpected "("
  1894. Lakka:~ # x0/0x0)
  1895. -sh: syntax error: unexpected ")"
  1896. Lakka:~ # > [ 13.532394] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0
  1897. /0x0/0x0/0
  1898. -sh: syntax error: unexpected "("
  1899. Lakka:~ # x0)
  1900. -sh: syntax error: unexpected ")"
  1901. Lakka:~ # > [ 13.532395] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
  1902. -sh: 13.532395]: not found
  1903. Lakka:~ # > [ 13.532396] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
  1904. -sh: 13.532396]: not found
  1905. Lakka:~ # > [ 13.532397] snd_hda_codec_via hdaudioC0D0: inputs:
  1906. -sh: 13.532397]: not found
  1907. Lakka:~ # > [ 13.532398] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
  1908. -sh: 13.532398]: not found
  1909. Lakka:~ # > [ 13.532400] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
  1910. -sh: 13.532400]: not found
  1911. Lakka:~ # > [ 13.532401] snd_hda_codec_via hdaudioC0D0: Line=0x1b
  1912. -sh: 13.532401]: not found
  1913. Lakka:~ # > [ 13.532402] snd_hda_codec_via hdaudioC0D0: CD=0x1f
  1914. -sh: 13.532402]: not found
  1915. Lakka:~ # > [ 14.446686] input: HDA NVidia Rear Mic as /devices/pci0000:00/000
  1916. 0:00:05.0/
  1917. -sh: 14.446686]: not found
  1918. Lakka:~ # sound/card0/input8
  1919. -sh: sound/card0/input8: not found
  1920. Lakka:~ # > [ 14.447326] input: HDA NVidia Front Mic as /devices/pci0000:00/00
  1921. 00:00:05.0
  1922. -sh: 14.447326]: not found
  1923. Lakka:~ # /sound/card0/input9
  1924. -sh: /sound/card0/input9: not found
  1925. Lakka:~ # > [ 14.447412] input: HDA NVidia Line as /devices/pci0000:00/0000:00
  1926. :05.0/soun
  1927. -sh: 14.447412]: not found
  1928. Lakka:~ # d/card0/input10
  1929. -sh: d/card0/input10: not found
  1930. Lakka:~ # > [ 14.447694] input: HDA NVidia Line Out as /devices/pci0000:00/000
  1931. 0:00:05.0/
  1932. -sh: 14.447694]: not found
  1933. Lakka:~ # sound/card0/input11
  1934. -sh: sound/card0/input11: not found
  1935. Lakka:~ # > [ 14.447757] input: HDA NVidia Front Headphone as /devices/pci0000
  1936. :00/0000:0
  1937. -sh: 14.447757]: not found
  1938. Lakka:~ # 0:05.0/sound/card0/input12
  1939. -sh: 0:05.0/sound/card0/input12: not found
  1940. Lakka:~ # > [ 14.569229] EXT4-fs (sdb2): mounted filesystem with ordered data
  1941. mode. Opts
  1942. -sh: syntax error: unexpected "("
  1943. Lakka:~ # : (null)
  1944. -sh: syntax error: unexpected word (expecting ")")
  1945. Lakka:~ # > [ 14.876136] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:0
  1946. 0/0000:00:
  1947. -sh: 14.876136]: not found
  1948. Lakka:~ # 09.0/0000:02:00.1/sound/card1/input4
  1949. -sh: 09.0/0000:02:00.1/sound/card1/input4: not found
  1950. Lakka:~ # > [ 14.876189] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:0
  1951. 0/0000:00:
  1952. -sh: 14.876189]: not found
  1953. Lakka:~ # 09.0/0000:02:00.1/sound/card1/input5
  1954. -sh: 09.0/0000:02:00.1/sound/card1/input5: not found
  1955. Lakka:~ # > [ 14.876233] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:0
  1956. 0/0000:00:
  1957. -sh: 14.876233]: not found
  1958. Lakka:~ # 09.0/0000:02:00.1/sound/card1/input6
  1959. -sh: 09.0/0000:02:00.1/sound/card1/input6: not found
  1960. Lakka:~ # > [ 14.876278] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:0
  1961. 0/0000:00:
  1962. -sh: 14.876278]: not found
  1963. Lakka:~ # 09.0/0000:02:00.1/sound/card1/input7
  1964. -sh: 09.0/0000:02:00.1/sound/card1/input7: not found
  1965. Lakka:~ # > Lakka:~ #
  1966. Lakka:~ # >
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!