Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Reading symbols from c:\Users\ceste\Eurorack_Dev\raiju_FW2\.pio\build\esp32dev\firmware.elf...
- done.
- PlatformIO Unified Debugger -> https://bit.ly/pio-debug
- PlatformIO: debug_tool = minimodule
- PlatformIO: Initializing remote target...
- Open On-Chip Debugger v0.10.0-esp32-20210721 (2021-07-21-13:35)
- Licensed under GNU GPL v2
- For bug reports, read
- http://openocd.org/doc/doxygen/bugs.html
- WARNING: boards/esp-wroom-32.cfg is deprecated, and may be removed in a future release.
- adapter speed: 5000 kHz
- Info : tcl server disabled
- Info : telnet server disabled
- Info : clock speed 5000 kHz
- Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : esp32.cpu0: Debug controller was reset.
- Info : esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Detected debug stubs @ 3ffc09a0
- Info : esp32.cpu1: Debug controller was reset.
- Info : esp32.cpu1: Core was reset.
- Info : accepting 'gdb' connection from pipe
- Warn : No symbols for FreeRTOS!
- Info : esp32.cpu0: Target halted, PC=0x400E84EA, debug_reason=00000000
- Info : Set GDB target to 'esp32.cpu0'
- Info : esp32.cpu1: Target halted, PC=0x400E84EA, debug_reason=00000000
- Warn : Not full dbg stub table 1 of 2
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : Flash mapping 0: 0x10020 -> 0x3f400020, 48 KB
- Info : Flash mapping 1: 0x20018 -> 0x400d0018, 97 KB
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : Auto-detected flash bank 'esp32.cpu0.flash' size 8192 KB
- Info : Using flash bank 'esp32.cpu0.flash' size 8192 KB
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : Flash mapping 0: 0x10020 -> 0x3f400020, 48 KB
- Info : Flash mapping 1: 0x20018 -> 0x400d0018, 97 KB
- Info : Using flash bank 'esp32.cpu0.irom' size 100 KB
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : Flash mapping 0: 0x10020 -> 0x3f400020, 48 KB
- Info : Flash mapping 1: 0x20018 -> 0x400d0018, 97 KB
- Info : Using flash bank 'esp32.cpu0.drom' size 52 KB
- Info : New GDB Connection: 1, Target esp32.cpu0, state: halted
- 0x400e84ea in esp_ota_get_running_partition () at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/app_update/esp_ota_ops.c:502
- 502 /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/app_update/esp_ota_ops.c: No such file or directory.
- Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : esp32.cpu0: Debug controller was reset.
- Info : esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- esp32.cpu0: Debug controller was reset.
- esp32.cpu0: Core was reset.
- esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- Info : esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- Info : esp32.cpu1: Debug controller was reset.
- Info : esp32.cpu1: Core was reset.
- esp32.cpu0: Core was reset.
- esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Debug controller was reset.
- esp32.cpu1: Core was reset.
- Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : Flash mapping 0: 0x10020 -> 0x3f400020, 48 KB
- Info : Flash mapping 1: 0x20018 -> 0x400d0018, 97 KB
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Flash mapping 0: 0x10020 -> 0x3f400020, 48 KB
- Flash mapping 1: 0x20018 -> 0x400d0018, 97 KB
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : Auto-detected flash bank 'esp32.cpu1.flash' size 8192 KB
- Info : Using flash bank 'esp32.cpu1.flash' size 8192 KB
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Auto-detected flash bank 'esp32.cpu1.flash' size 8192 KB
- Using flash bank 'esp32.cpu1.flash' size 8192 KB
- ** Programming Started **
- ** Programming Started **
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : PROF: Data transferred in 123.979 ms @ 161.318 KB/s
- PROF: Data transferred in 123.979 ms @ 161.318 KB/s
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Programming Finished **
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Programming Finished **
- ** Verify Started **
- ** Verify Started **
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Error: **** Verification failure! ****
- Error: target_hash 7f296c...84fa74
- Error: file_hash: 2e273...27f6c
- embedded:startup.tcl:449: Error: ** Verify Failed **
- in procedure 'program_esp'
- in procedure 'program_error' called at file "C:/Users/ceste/.platformio/packages/tool-openocd-esp32/share/openocd/scripts/target/esp_common.cfg", line 135
- at file "embedded:startup.tcl", line 449
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- **** Verification failure! ****
- target_hash 7f296c...84fa74
- file_hash: 2e273...27f6c
- embedded:startup.tcl:449: Error: ** Verify Failed **
- in procedure 'program_esp'
- in procedure 'program_error' called at file "C:/Users/ceste/.platformio/packages/tool-openocd-esp32/share/openocd/scripts/target/esp_common.cfg", line 135
- at file "embedded:startup.tcl", line 449
- Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : esp32.cpu0: Debug controller was reset.
- Info : esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- esp32.cpu0: Debug controller was reset.
- esp32.cpu0: Core was reset.
- esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- Info : esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- Info : esp32.cpu1: Debug controller was reset.
- Info : esp32.cpu1: Core was reset.
- esp32.cpu0: Core was reset.
- esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Debug controller was reset.
- esp32.cpu1: Core was reset.
- Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- ** Programming Started **
- ** Programming Started **
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : PROF: Data transferred in 32.08 ms @ 124.688 KB/s
- PROF: Data transferred in 32.08 ms @ 124.688 KB/s
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Programming Finished **
- ** Verify Started **
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Programming Finished **
- ** Verify Started **
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Verified OK **
- ** Verified OK **
- Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : esp32.cpu0: Debug controller was reset.
- Info : esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- esp32.cpu0: Debug controller was reset.
- esp32.cpu0: Core was reset.
- esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- Info : esp32.cpu0: Core was reset.
- esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- Info : esp32.cpu1: Debug controller was reset.
- Info : esp32.cpu1: Core was reset.
- esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Debug controller was reset.
- esp32.cpu1: Core was reset.
- Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- ** Programming Started **
- ** Programming Started **
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : PROF: Data transferred in 61.883 ms @ 129.276 KB/s
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- PROF: Data transferred in 61.883 ms @ 129.276 KB/s
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Programming Finished **
- ** Verify Started **
- ** Programming Finished **
- ** Verify Started **
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Verified OK **
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Verified OK **
- Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : esp32.cpu0: Debug controller was reset.
- Info : esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- esp32.cpu0: Debug controller was reset.
- esp32.cpu0: Core was reset.
- esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- Info : esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- Info : esp32.cpu1: Debug controller was reset.
- Info : esp32.cpu1: Core was reset.
- esp32.cpu0: Core was reset.
- esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Debug controller was reset.
- esp32.cpu1: Core was reset.
- Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- ** Programming Started **
- ** Programming Started **
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Info : PROF: Data transferred in 1176.71 ms @ 169.965 KB/s
- PROF: Data transferred in 1176.71 ms @ 169.965 KB/s
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Programming Finished **
- ** Verify Started **
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- ** Programming Finished **
- ** Verify Started **
- Info : esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- Error: **** Verification failure! ****
- Error: target_hash 24d5b...abad14
- Error: file_hash: 3d5feb...d04bbe
- embedded:startup.tcl:449: Error: ** Verify Failed **
- in procedure 'program_esp'
- in procedure 'program_error' called at file "C:/Users/ceste/.platformio/packages/tool-openocd-esp32/share/openocd/scripts/target/esp_common.cfg", line 135
- at file "embedded:startup.tcl", line 449
- esp32.cpu0: Target halted, PC=0x400928DA, debug_reason=00000001
- **** Verification failure! ****
- target_hash 24d5b...abad14
- file_hash: 3d5feb...d04bbe
- embedded:startup.tcl:449: Error: ** Verify Failed **
- in procedure 'program_esp'
- in procedure 'program_error' called at file "C:/Users/ceste/.platformio/packages/tool-openocd-esp32/share/openocd/scripts/target/esp_common.cfg", line 135
- at file "embedded:startup.tcl", line 449
- Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
- Info : esp32.cpu0: Debug controller was reset.
- Info : esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- esp32.cpu0: Debug controller was reset.
- esp32.cpu0: Core was reset.
- esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
- Info : esp32.cpu0: Core was reset.
- esp32.cpu0: Core was reset.
- Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- Info : esp32.cpu1: Debug controller was reset.
- Info : esp32.cpu1: Core was reset.
- esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Debug controller was reset.
- esp32.cpu1: Core was reset.
- Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
- Temporary breakpoint 1 at 0x400d0bf4: file src\main.cpp, line 5.
- PlatformIO: Initialization completed
- PlatformIO: Resume the execution to `debug_init_break = tbreak setup`
- PlatformIO: More configuration options -> https://bit.ly/pio-debug
- Note: automatically using hardware breakpoints for read-only addresses.
- Info : esp32.cpu0: Detected debug stubs @ 3ffc09a0
- esp32.cpu0: Detected debug stubs @ 3ffc09a0
Add Comment
Please, Sign In to add comment