Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- RouterPassView v1.75
- Copyright (c) 2010 - 2018 Nir Sofer
- Description
- ===========
- Most modern routers allow you to backup the configuration of the router
- into a file, and then restore the configuration from the file when it's
- needed.
- The backup file of the router usually contains important data like your
- ISP user name/password, the login password of the router, and wireless
- network keys.
- If you lost one of these password/keys, but you still have a backup file
- of your router configuration, RouterPassView might help you to recover
- your lost password from your router file.
- System Requirements
- ===================
- * This utility works on any version of Windows, starting from Windows
- 2000 and up to Windows 10.
- * RouterPassView supports limited number of router models. See below.
- Versions History
- ================
- * Version 1.75:
- o Added support for multiple ZTE models with AES encryption,
- including H108N, H118N, H267N, H298N, H168N, and possibly more...
- * Version 1.72:
- o When RouterPassView manages to detect a router file and decrypt
- it, the file type code is now displayed in the bottom status bar (See
- the 'Detected File Type' section for more information)
- * Version 1.71:
- o Added support for TP-LINK TL-WR842N and Mercury MW325R (In Ascii
- Text Mode).
- * Version 1.70:
- o Added support for D-Link L7-N-R2000 (In Ascii Text Mode).
- o Added support for D-Link DIR-615, DSL-2730U, and possibly other
- models (In Ascii Text Mode).
- * Version 1.65:
- o Fixed bug with some ZTE routers: RouterPassView decompressed only
- the first compressed block, so only a part of the file was displayed.
- * Version 1.63:
- o Fixed the Ascii Text Mode to display properly router files that
- contain many null characters.
- * Version 1.62:
- o Added support for another version of rom-0/Hdbgarea file format
- (Zyxel P-2612HWU-F1 Modem).
- * Version 1.61:
- o Added support for LevelOne WBR-3406TX v2 and possibly other
- routers (with DDC6031 and ZXL6031 signatures)
- * Version 1.60:
- o Added support for decompression of rom-0/Hdbgarea file format,
- which is used in multiple routers, including Huawei Echolife
- HG510a/HG520s/HG520b/HG520c, TP-LINK TD-W8901N, TP-LINK TD-8816,
- TP-LINK TD-W8901G, TP-LINK TD-W8951ND, TP-LINK TD-8817, SmartAX
- MT880a/MT880d/MT882a, Zyxel AMG1302, and possibly others. Be aware
- that in table mode, only the login password of the router is
- displayed, but you can find all other data if you switch to Hex Dump
- mode.
- * Version 1.57:
- o Added 'Export To Raw Decrypted File' option.
- * Version 1.56:
- o Added support for TP-LINK Archer D5 (Only in Ascii text mode).
- * Version 1.55:
- o Added support for TP-LINK Archer C2 (Only in Ascii text mode).
- * Version 1.54:
- o Added support for NETGEAR DEVG2020 (Only in Ascii text mode).
- * Version 1.53:
- o Added support for Linksys WRV200 (Base64 encoded file) - Hex Dump
- mode only.
- * Version 1.52:
- o Added support for ipTIME N604V (Hex Dump mode only)
- * Version 1.51:
- o Added support for NETGEAR WGR614v9, WNR1000v3, WNR3500L, and
- possibly other models.
- * Version 1.50:
- o Added support for routers that use zlib compression with 78DA
- header.
- * Version 1.48:
- o Added /RouterWeb command-line option, which opens the Web
- interface of the router in the default Web browser.
- * Version 1.47:
- o Added support for DD-WRT files (nvrambak.bin). You can view the
- entire file in name=value format, on Ascii text mode.
- * Version 1.46:
- o Added generic support for xml files with Base64 encoding, like in
- TP-Link TD-W8960N router.
- * Version 1.45:
- o Added generic support for simple XOR/Add encryption. (Works on
- HuaWei-3Com Aolynk BR104 and probably other routers)
- o The Find dialog-box now also works on the text modes.
- * Version 1.42:
- o Added support for HuaWei HG526.
- o The opened router filename is now displayed in the window title.
- * Version 1.41:
- o Added support for D-Link DIR-600 (Only in Ascii text mode)
- * Version 1.40:
- o Added support for D-Link DI-524 (firmware versions 2.x and 3.x),
- D-Link DI-624+A, and other routers with DLB6061 / DLB6031 signature.
- * Version 1.39:
- o Fixed a bug with decryption of Asus routers (Asus RT-N10+, Asus
- RT-N56U, and others)
- * Version 1.38:
- o Added support for Asus RT-N10+ , and possibly other routers with
- the same encryption.
- * Version 1.37:
- o Added support for HuaWei EchoLife HG520 (In Ascii Text Mode), and
- possibly other routers with the same encryption.
- * Version 1.36:
- o Added support for D-Link DIR-615 G2.
- * Version 1.35:
- o Added support for TP-LINK TL-WR700N, advanced versions of
- TL-WR340G, and probably other TP-LINK routers.
- * Version 1.33:
- o Imporved (again) the detection of Edimax routers.
- * Version 1.32:
- o Added support for multiple TP-LINK routers, including TL-WR841N,
- TL-WR841DN, TL-MR342, TL-WR340G, TL-R460, and probably other models.
- * Version 1.31:
- o Added support for decrypting the passwords of Linksys/Cisco RV042.
- * Version 1.30:
- o Imporved the detection of Edimax routers.
- * Version 1.29:
- o Added 'Open Router Web Interface' option (Ctrl+W), which allows
- you to easily open the Web interface of your router with your default
- Web browser.
- * Version 1.28:
- o Added support for more NETGEAR router models.
- * Version 1.27:
- o Added generic support (in Hex Dump mode) for router files that
- are encrypted with XOR 0xff, like Thomson TG580 DSL.
- * Version 1.26:
- o Added 'Copy Password/Value' option to easily copy only the
- password or wireless key into the clipboard.
- * Version 1.25:
- o Added support for D-Link DSL-604T and other models that their
- config file begins with LMMC signature.
- o Added generic support for router files that are compressed with
- Deflate compression algorithm. (only on Ascii and Hex Dump modes)
- * Version 1.20:
- o Added /sascii command-line option - Save the decrypted router
- file as Ascii text file.
- o Added /shex command-line option - Save the decrypted router file
- as hex-dump text file.
- o Added /sraw command-line option - Save the decrypted router file
- as raw binary file.
- * Version 1.16:
- o Added support for other versions of Edimax router file -
- currently only in Hex Dump mode.
- o When you open a file that RouterPassView can decrypt, but it
- cannot locate the exact passwords location, it'll automatically
- switch to Hex Dump mode, so you'll be able to try locating the
- password in the decrypted Hex Dump.
- * Version 1.15:
- o Added command-line support.
- o Fixed issue: Removed the wrong encoding from the xml string,
- which caused problems to some xml viewers.
- * Version 1.10:
- o Added 'Grab Password From IE Window' option - Allows you to open
- the router configuration interface in Internet Explorer, and then
- grab the password stored inside the password text-box of the router
- Web page.
- * Version 1.05:
- o Added support for D-Link DIR-300, and possibly similar models.
- * Version 1.04:
- o Added support for Sitecom WL-351, and possibly other models.
- * Version 1.03:
- o Fixed bug: user names of D-Link routers were wrong.
- * Version 1.02:
- o Added support for D-Link DIR-655, and possibly other models (with
- gateway_settings.gws filename)
- o Added support for Sanex SA 5100, and possibly other models.
- o Fixed bug: Copy to clipboard (Ctrl+C) was disabled in text mode.
- * Version 1.01:
- o Added support for Tomato firmware.
- o Added the password of 'support' user for D-Link DSL-2540U and
- possibly other routers.
- * Version 1.00 - First release.
- Supported Routers
- =================
- Due to large amount of router models available in the market, it's
- impossible to support all of them.
- For now, RouterPassView supports a limited number of router models, and
- I'll gradually add support for more routers in future versions. Also, be
- aware that even if your router is not in the list, you can still try to
- open your router backup file with RouterPassView, because some routers
- are sold with different brand name, but they still use the same
- software/chipset of other routers.
- Here's the list:
- * Linksys WRT54GL (With original firmware or Tomato firmware), WRT54G
- (only some of them), WRT160N, WRT320N, and possibly similar models.
- * Linksys E5200
- * Linksys E1200
- * Linksys E2000
- * Linksys RV082
- * Linksys E2500
- * Linksys N1500
- * Linksys E900
- * Cisco-Linksys E4200
- * Cisco Linksys E1000 v2.1
- * Edimax BR6204WG, and possibly similar models.
- * Siemens ADSL SL2-141, and possibly similar models.
- * Siemens CL-110 PSTN ADSL2+
- * Dynalink RTA1025W, and possibly similar models.
- * NETGEAR WGT624, WGR614v9, WNR1000v3, WNR3500L, and possibly other
- models.
- * NETGEAR DEVG2020
- * ASUS WL-520g, WL-600g, and possibly similar models.
- * ASUS RT-N10+ , and possibly similar models.
- * Asus RT-N56U , and possibly similar models.
- * Asus RT-AC66U
- * Asus RT-AC68U
- * Asus RT-AC68W
- * Asus RT-N66U
- * Asus DSL\96N14U
- * D-Link DIR-655, DIR-300, and possibly similar models.
- * Sanex SA 5100, and possibly similar models.
- * Sitecom WL-351, WL-575, WL-312, and possibly similar models.
- * COMTREND 536+ (Only Internet Login)
- * US Robotics 9108 ADSL (internet login and admin login)
- * D-Link DSL-2540U/BRU/D ADSL2+, DSL-2650U, DSL-520B
- * D-Link DVA-G3170i/PT
- * D-Link DSL-604T
- * D-Link G3670B
- * D-Link DSL-2640T
- * D-Link DSL-G684T
- * D-Link DSL-2500U
- * D-Link 2740B
- * D-Link DIR-615 G2
- * D-Link WBR-1310
- * D-Link DSL-2543B
- * D-Link DI-524
- * D-Link DI-624+A
- * D-Link DIR-600
- * D-Link DIR-300
- * D-Link DSL-2780
- * D-Link DIR-605L
- * D-Link DSL-2750U
- * D-Link L7-N-R2000
- * D-Link DIR-615
- * D-Link DSL-2730U
- * D-Link DSL-2877AL
- * TL-WDR4300 N750
- * TP-Link TD-8810 ADSL Modem/Router.
- * Dynamode R-ADSL-C4-W-G1
- * NetComm NB5Plus4 DSL
- * Thomson TG580 DSL (only in Hex Dump mode)
- * Asus RT-G31
- * HuaWei EchoLife HG520
- * Huawei Echolife HG510a/HG520s/HG520b/HG520c
- * HuaWei HG526
- * HuaWei-3Com Aolynk BR104
- * TP-LINK TL-WR841N
- * TP-LINK TL-WR841DN
- * TP-LINK TL-WR842N
- * TP-LINK TL-MR342
- * TP-LINK TL-WR340G
- * TP-LINK TL-R460
- * TP-LINK TL-WR741ND v2.0
- * TP-LINK TL-WR700N
- * TP-LINK TL-WR740N
- * TP-LINK TL-WA801N
- * TP-LINK TL-WR541G
- * TP-LINK TL-WR1043ND
- * TP-LINK TD-W8960N
- * TP-Link TL-WR941ND
- * TP-Link TL-MR3220
- * TP-Link TL-WR642G
- * TP-Link TL-WDR3320
- * TP-Link TL-WDR3600
- * TP-LINK TL-WR720N
- * TP-Link TD-W8970
- * TP-LINK TD-W8901N
- * TP-LINK TD-8816
- * TP-LINK TD-W8901G
- * TP-LINK TD-W8951ND
- * TP-LINK TD-8840
- * TP-LINK TD-8817
- * TP-LINK TD-W8968 V2
- * TP-LINK TL-WR845N
- * TP-LINK Archer C2
- * TP-LINK Archer D5
- * TP-LINK Archer D9
- * TP-LINK Archer C9
- * TP-LINK Archer C5
- * TP-LINK Archer C7
- * TP-LINK Archer MR200 AC750
- * Belkin N+ (F5D8236uk4)
- * Mercury MW54R
- * Netgear AC5300 Nighthawk X8 (R8500)
- * Netgear AC1750 Smart WiFi Router(R6300)
- * Netgear Nighthawk AC1900 (R7000)
- * Netgear N900 WiFi Dual Band Gigabit Router (WNDR4500)
- * Netgear DG632
- * Netgear Wireless Cable Voice Gateway CG3000/CG3100
- * Netgear WNDR4000 (Rev 1)
- * Netgear WNR2000v2
- * Netcomm NB6W
- * Aztech DSL605EW
- * Comtrend CT-5072T ADSL2+ modem/router
- * Small Business RV042
- * Intelbras WRN240
- * ipTIME N604V
- * Linksys WRV200
- * Sagem F@ST2404
- * ZTE ZXV10
- * ZTE ZXHN H108N
- * ZTE ZXHN H118N
- * ZTE ZXHN H267N
- * ZTE ZXHN H298N
- * ZTE ZXHN H168N
- * ZTE ZXHN F660
- * SmartAX MT880a/MT880d/MT882a
- * Zyxel AMG1302
- * Zyxel P-2612HWU-F1
- * ZyXel NBG-418N
- * Alcatel Lucent I-240W-A
- * LevelOne WBR-3406TX v2
- * MSI RG54SE II
- * Mercury MW325R
- * SmartRG SR555AC
- If you have router model that is not listed here, and you managed to
- recover your password with RouterPassView, please report about it to
- nirsofer@yahoo.com and specify the exact model name.
- Using RouterPassView
- ====================
- RouterPassView doesn't require any installation process or additional DLL
- files. In order to start using it, simply run the executable file -
- RouterPassView.exe
- After running RouterPassView, you can open your router configuration file
- by using 'Open Router Config File' option (Ctrl+O) or by dragging the
- config file from Explorer into the main window of RouterPassView.
- If RouterPassView manage to detect and decrypt your router file, you
- should get a list of passwords/wireless keys in the main window of
- RouterPassView. If RouterPassView cannot detect your file, it'll remain
- empty.
- Text Mode (Ascii and Hex Dump)
- ==============================
- If RouterPassView shows you a list of passwords, but you can't find the
- password or other data that you need, you may try to locate your password
- by switching to Ascii Text Mode (F3) or Hex Dump Text Mode (F4).
- In these modes, RouterPassView decrypts the router file, but display it
- "as is" without analyzing the data stored in it.
- How to submit a config file
- ===========================
- If you have a router config file that RouterPassView cannot decrypt and
- analyze, you are welcomed to send the sample config file to
- nirsofer@yahoo.com, and I'll try to figure out how to read it and add
- support for this file in future version.
- You can also increase the chance of my ability to add support for your
- config file if you follow the submission instructions below. However, be
- aware that it requires you to disconnect your network and internet
- connection for a few minues.
- 1. Backup your current router configuration and keep it in a safe
- place on your local disk.
- 2. Update your router configuration with dummy user names, passwords,
- and wireless keys. You should use very simple passwords/keys, like
- 1111111111, 2222222222, ABABABABAB, 12345678, and so on. Putting these
- easy passwords give me a much better chance to crack the config file
- and find out how the passwords are encrypted.
- 3. Save the modified dummy configuration into a file. This file should
- be sent to nirsofer@yahoo.com for examination.
- 4. Restore your real router configuration from the file that you saved
- in the first stage.
- 5. Send the backup file with the dummy passwords to
- nirsofer@yahoo.com, and specify the router model/firmware and the
- dummy passwords that you set in this config file.
- Detected File Type
- ==================
- Starting from version 1.72, RouterPassView displays the detected file
- type in the bottom status bar.
- Here's the list of all possible file types:
- * 1 - Linksys WRTxxx routers
- * 2 - Edimax routers with DS0 signature
- * 3 - Siemens routers (File begins with <psitree> )
- * 4 - Asus routers (HDR1 signature)
- * 5 - Netgear unencrypted
- * 6 - Tomato firmware
- * 7 - Sanex routers
- * 8 - D-Link routers (1)
- * 9 - Sitecom routers
- * 10 - D-Link routers (2)
- * 11 - D-Link routers (3)
- * 12 - Linksys routers (R31P Signature)
- * 13 - Routers with LMMC Signature
- * 14 - TP-Link Routers (1)
- * 15 - TP-Link Routers (2)
- * 16 - Simple encryption - add 0x80 to every byte
- * 17 - Asus (RT-N10 and some other models)
- * 18 - Routers with DLB/DDC/ZXL signature
- * 19 - HuaWei HG526 and some similar models
- * 20 - DD-WRT firmware
- * 21 - Netgear DES Encryption
- * 22 - Netgear file with 'encryptionnQP' signature
- * 23 - TP-Link Routers (3)
- * 24 - Routers with Hdbgarea signature (1)
- * 25 - Routers with Hdbgarea signature (2)
- * 26 - D-Link routers (4)
- * 27 - D-Link routers (5)
- * 28 - TP-Link Routers (4)
- * 100 - Generic gzip compression
- * 101 - Generic deflate compression
- * 102 - XOR with 0xff
- * 103 - generic XOR
- * 104 - generic add
- * 105 - generic XML (unencrypted)
- * 106 - Base64
- Using the 'Grab Password From IE Window' option
- ===============================================
- If you try to recover your ISP/ADSL/L2TP/PPTP/PPPOE/DDNS password, but
- RouterPassView cannot decrypt the configuration file of your router, you
- still have a chance to retrieve the password by using this feature,
- assuming that you have the login password of your router.
- In order to use this feature, follow the instructions below.
- 1. Login into your router Web interface with Internet Explorer, and go
- to the password page that you wish to recover. This password page may
- look like this one:
- As you can see in the above screenshot, the password field is filled
- with bullets, but if this password field really contains the password,
- RouterPassView will be able to extract it and display it on the main
- window.
- 2. Go to the File menu, and choose 'Grab Password From IE Window' or
- simply press Ctrl+G
- 3. If the router Web page store the password in the password field,
- RouterPassView will display the hidden password:
- Be aware that some routers deliberately store wrong password in this
- field, and in for these routers, RouterPassView won't be able to
- recover your real password.
- Command-Line Options
- ====================
- /RouterFile <Filename>
- Specifies the router file to load.
- /RouterWeb
- Opens the Web interface of the router in the default Web browser.
- /stext <Filename>
- Save the list of router passwords into a regular text file.
- /stab <Filename>
- Save the list of router passwords into a tab-delimited text file.
- /scomma <Filename>
- Save the list of router passwords into a comma-delimited text file (csv).
- /stabular <Filename>
- Save the list of router passwords into a tabular text file.
- /shtml <Filename>
- Save the list of router passwords into HTML file (Horizontal).
- /sverhtml <Filename>
- Save the list of router passwords into HTML file (Vertical).
- /sxml <Filename>
- Save the list of router passwords into XML file.
- /sascii <Filename>
- Save the decrypted router file as Ascii text file. (Similar to the Ascii
- Text Mode)
- /shex <Filename>
- Save the decrypted router file as hex-dump text file. (Similar to the
- Hex-Dump Text Mode)
- /sraw <Filename>
- Save the decrypted router file as raw binary file, Which means that the
- file is decrypted and then saved 'as is' without any processing.
- Translating RouterPassView to other languages
- =============================================
- In order to translate RouterPassView to other language, follow the
- instructions below:
- 1. Run RouterPassView with /savelangfile parameter:
- RouterPassView.exe /savelangfile
- A file named RouterPassView_lng.ini will be created in the folder of
- RouterPassView utility.
- 2. Open the created language file in Notepad or in any other text
- editor.
- 3. Translate all string entries to the desired language. Optionally,
- you can also add your name and/or a link to your Web site.
- (TranslatorName and TranslatorURL values) If you add this information,
- it'll be used in the 'About' window.
- 4. After you finish the translation, Run RouterPassView, and all
- translated strings will be loaded from the language file.
- If you want to run RouterPassView without the translation, simply
- rename the language file, or move it to another folder.
- License
- =======
- This utility is released as freeware. You are allowed to freely use it at
- your home or in your company. However, you are not allowed to make profit
- from this software or to charge your customers for recovering their
- passwords with this software, unless you got a permission from the
- software author.
- You are also allowed to freely distribute this utility via floppy disk,
- CD-ROM, Internet, or in any other way, as long as you don't charge
- anything for this. If you distribute this utility, you must include all
- files in the distribution package, without any modification !
- Disclaimer
- ==========
- The software is provided "AS IS" without any warranty, either expressed
- or implied, including, but not limited to, the implied warranties of
- merchantability and fitness for a particular purpose. The author will not
- be liable for any special, incidental, consequential or indirect damages
- due to loss of data or any other reason.
- Feedback
- ========
- If you have any problem, suggestion, comment, or you found a bug in my
- utility, you can send a message to nirsofer@yahoo.com
Add Comment
Please, Sign In to add comment