Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2020.01 (Jan 30 2020 - 10:43:44 +0000)
- Trying to boot from MMC1
- NOTICE: BL31: v2.1(debug):
- NOTICE: BL31: Built : 22:19:57, Sep 4 2019
- ERROR: over or zero region, nr=4187432, max=10
- NOTICE: BL31:Rockchip release version: v1.2
- INFO: ARM GICv2 driver initialized
- INFO: plat_rockchip_pmu_init: pd status 0xe
- INFO: BL31: Initializing runtime services
- WARNING: BL31: cortex_a53: CPU workaround for 819472 was missing!
- WARNING: BL31: cortex_a53: CPU workaround for 824069 was missing!
- WARNING: BL31: cortex_a53: CPU workaround for 827319 was missing!
- WARNING: BL31: cortex_a53: CPU workaround for 855873 was missing!
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2020.01 (Jan 30 2020 - 10:43:44 +0000)
- Model: Pine64 Rock64
- DRAM: 1022 MiB
- PMIC: RK8050 (on=0x40, off=0x00)
- MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
- Loading Environment from MMC... *** Warning - bad CRC, using default environment
- In: serial@ff130000
- Out: serial@ff130000
- Err: serial@ff130000
- Model: Pine64 Rock64
- Net: eth0: ethernet@ff540000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- switch to partitions #0, OK
- mmc1 is current device
- ** No partition table - mmc 1 **
- ** No partition table - mmc 1 **
- ** No partition table - mmc 1 **
- starting USB...
- Bus usb@ff5c0000: USB EHCI 1.00
- Bus usb@ff5d0000: USB OHCI 1.0
- Bus usb@ff580000: Bus usb@ff600000: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus usb@ff5c0000 for devices... 1 USB Device(s) found
- scanning bus usb@ff5d0000 for devices... 1 USB Device(s) found
- scanning bus usb@ff580000 for devices... 1 USB Device(s) found
- scanning bus usb@ff600000 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Device 0: unknown device
- Speed: 1000, full duplex
- BOOTP broadcast 1
- DHCP client bound to address 192.168.43.139 (0 ms)
- *** ERROR: `serverip' not set
- Cannot autoload with TFTPGET
- missing environment variable: pxeuuid
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/01-ea-ae-21-43-e8-ef
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A82B8B
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A82B8
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A82B
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A82
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A8
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0A
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C0
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/C
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default-arm-rk3328-evb_rk3328
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default-arm-rk3328
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default-arm
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- missing environment variable: bootfile
- Retrieving file: pxelinux.cfg/default
- Speed: 1000, full duplex
- *** ERROR: `serverip' not set
- Config file not found
- Speed: 1000, full duplex
- BOOTP broadcast 1
- DHCP client bound to address 192.168.43.139 (0 ms)
- *** ERROR: `serverip' not set
- Cannot autoload with TFTPGET
- Speed: 1000, full duplex
- BOOTP broadcast 1
- DHCP client bound to address 192.168.43.139 (0 ms)
- *** ERROR: `serverip' not set
- Cannot autoload with TFTPGET
- =>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement