SHARE
TWEET

Untitled

a guest Nov 16th, 2012 84 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 3.6.2-1.fc16.x86_64 (mockbuild@buildvm-12.phx2.fedoraproject.org) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #1 SMP Wed Oct 17 05:30:01 UTC 2012
  4. [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.6.2-1.fc16.x86_64 root=UUID=a9b1e425-5bc6-46cd-ab01-e6e492309cc8 ro rd.md=0 rd.lvm=0 rd.dm=0 KEYTABLE=us quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 LANG=en_US.UTF-8
  5. [    0.000000] e820: BIOS-provided physical RAM map:
  6. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
  7. [    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
  8. [    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
  9. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dd8ffff] usable
  10. [    0.000000] BIOS-e820: [mem 0x000000007dd90000-0x000000007dd9dfff] ACPI data
  11. [    0.000000] BIOS-e820: [mem 0x000000007dd9e000-0x000000007dddffff] ACPI NVS
  12. [    0.000000] BIOS-e820: [mem 0x000000007dde0000-0x000000007ddfffff] reserved
  13. [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  14. [    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
  15. [    0.000000] NX (Execute Disable) protection: active
  16. [    0.000000] DMI present.
  17. [    0.000000] DMI: Hewlett-Packard HP Pro 3010 Microtower PC/2A94h, BIOS 5.17    01/28/2010
  18. [    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
  19. [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  20. [    0.000000] No AGP bridge found
  21. [    0.000000] e820: last_pfn = 0x7dd90 max_arch_pfn = 0x400000000
  22. [    0.000000] MTRR default type: uncachable
  23. [    0.000000] MTRR fixed ranges enabled:
  24. [    0.000000]   00000-9FFFF write-back
  25. [    0.000000]   A0000-BFFFF uncachable
  26. [    0.000000]   C0000-CFFFF write-protect
  27. [    0.000000]   D0000-DFFFF uncachable
  28. [    0.000000]   E0000-EFFFF write-through
  29. [    0.000000]   F0000-FFFFF write-protect
  30. [    0.000000] MTRR variable ranges enabled:
  31. [    0.000000]   0 base 000000000 mask F80000000 write-back
  32. [    0.000000]   1 base 07DE00000 mask FFFE00000 uncachable
  33. [    0.000000]   2 base 07E000000 mask FFE000000 uncachable
  34. [    0.000000]   3 disabled
  35. [    0.000000]   4 disabled
  36. [    0.000000]   5 disabled
  37. [    0.000000]   6 disabled
  38. [    0.000000]   7 disabled
  39. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  40. [    0.000000] original variable MTRRs
  41. [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
  42. [    0.000000] reg 1, base: 2014MB, range: 2MB, type UC
  43. [    0.000000] reg 2, base: 2016MB, range: 32MB, type UC
  44. [    0.000000] total RAM covered: 2014M
  45. [    0.000000] Found optimal setting for mtrr clean up
  46. [    0.000000]  gran_size: 64K  chunk_size: 64M         num_reg: 3      lose cover RAM: 0G
  47. [    0.000000] New variable MTRRs
  48. [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
  49. [    0.000000] reg 1, base: 2014MB, range: 2MB, type UC
  50. [    0.000000] reg 2, base: 2016MB, range: 32MB, type UC
  51. [    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
  52. [    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
  53. [    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
  54. [    0.000000] init_memory_mapping: [mem 0x00000000-0x7dd8ffff]
  55. [    0.000000]  [mem 0x00000000-0x7dbfffff] page 2M
  56. [    0.000000]  [mem 0x7dc00000-0x7dd8ffff] page 4k
  57. [    0.000000] kernel direct mapping tables up to 0x7dd8ffff @ [mem 0x1fc0e000-0x1fffffff]
  58. [    0.000000] RAMDISK: [mem 0x35d5c000-0x36ea5fff]
  59. [    0.000000] ACPI: RSDP 00000000000f95a0 00014 (v00 HPQOEM)
  60. [    0.000000] ACPI: RSDT 000000007dd90000 00044 (v01 HPQOEM SLIC-BPC 20100128 MSFT 00000097)
  61. [    0.000000] ACPI: FACP 000000007dd90200 00084 (v01 HPQOEM SLIC-BPC 20100128 MSFT 00000097)
  62. [    0.000000] ACPI: DSDT 000000007dd90440 05753 (v01 HPQOEM SLIC-BPC 00000050 INTL 20051117)
  63. [    0.000000] ACPI: FACS 000000007dd9e000 00040
  64. [    0.000000] ACPI: APIC 000000007dd90390 0006C (v01 HPQOEM SLIC-BPC 20100128 MSFT 00000097)
  65. [    0.000000] ACPI: MCFG 000000007dd90400 0003C (v01 HPQOEM SLIC-BPC 20100128 MSFT 00000097)
  66. [    0.000000] ACPI: OEMB 000000007dd9e040 00076 (v01 HPQOEM SLIC-BPC 20100128 MSFT 00000097)
  67. [    0.000000] ACPI: HPET 000000007dd95ba0 00038 (v01 HPQOEM SLIC-BPC 20100128 MSFT 00000097)
  68. [    0.000000] ACPI: GSCI 000000007dd9e0c0 02024 (v01 HPQOEM SLIC-BPC 20100128 MSFT 00000097)
  69. [    0.000000] ACPI: SLIC 000000007dda00f0 00176 (v01 HPQOEM SLIC-BPC 00000001 MSFT 00000001)
  70. [    0.000000] ACPI: SSDT 000000007dda0d20 00A7C (v01 HPQOEM SLIC-BPC 00000012 INTL 20051117)
  71. [    0.000000] ACPI: Local APIC address 0xfee00000
  72. [    0.000000] No NUMA configuration found
  73. [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007dd8ffff]
  74. [    0.000000] Initmem setup node 0 [mem 0x00000000-0x7dd8ffff]
  75. [    0.000000]   NODE_DATA [mem 0x7dd7c000-0x7dd8ffff]
  76. [    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b400000-ffff88007d3fffff] on node 0
  77. [    0.000000] Zone ranges:
  78. [    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
  79. [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
  80. [    0.000000]   Normal   empty
  81. [    0.000000] Movable zone start for each node
  82. [    0.000000] Early memory node ranges
  83. [    0.000000]   node   0: [mem 0x00010000-0x0009dfff]
  84. [    0.000000]   node   0: [mem 0x00100000-0x7dd8ffff]
  85. [    0.000000] On node 0 totalpages: 515358
  86. [    0.000000]   DMA zone: 64 pages used for memmap
  87. [    0.000000]   DMA zone: 6 pages reserved
  88. [    0.000000]   DMA zone: 3912 pages, LIFO batch:0
  89. [    0.000000]   DMA32 zone: 7991 pages used for memmap
  90. [    0.000000]   DMA32 zone: 503385 pages, LIFO batch:31
  91. [    0.000000] ACPI: PM-Timer IO Port: 0x808
  92. [    0.000000] ACPI: Local APIC address 0xfee00000
  93. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  94. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  95. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
  96. [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
  97. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  98. [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  99. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  100. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  101. [    0.000000] ACPI: IRQ0 used by override.
  102. [    0.000000] ACPI: IRQ2 used by override.
  103. [    0.000000] ACPI: IRQ9 used by override.
  104. [    0.000000] Using ACPI (MADT) for SMP configuration information
  105. [    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
  106. [    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
  107. [    0.000000] nr_irqs_gsi: 40
  108. [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
  109. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  110. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
  111. [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
  112. [    0.000000] e820: [mem 0x7de00000-0xfedfffff] available for PCI devices
  113. [    0.000000] Booting paravirtualized kernel on bare hardware
  114. [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
  115. [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007da00000 s84480 r8192 d22016 u524288
  116. [    0.000000] pcpu-alloc: s84480 r8192 d22016 u524288 alloc=1*2097152
  117. [    0.000000] pcpu-alloc: [0] 0 1 2 3
  118. [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 507297
  119. [    0.000000] Policy zone: DMA32
  120. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.6.2-1.fc16.x86_64 root=UUID=a9b1e425-5bc6-46cd-ab01-e6e492309cc8 ro rd.md=0 rd.lvm=0 rd.dm=0 KEYTABLE=us quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 LANG=en_US.UTF-8
  121. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  122. [    0.000000] __ex_table already sorted, skipping sort
  123. [    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
  124. [    0.000000] Checking aperture...
  125. [    0.000000] No AGP bridge found
  126. [    0.000000] Memory: 1994248k/2061888k available (6291k kernel code, 456k absent, 67184k reserved, 6914k data, 1028k init)
  127. [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  128. [    0.000000] Hierarchical RCU implementation.
  129. [    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  130. [    0.000000] NR_IRQS:16640 nr_irqs:712 16
  131. [    0.000000] Console: colour VGA+ 80x25
  132. [    0.000000] console [tty0] enabled
  133. [    0.000000] allocated 8388608 bytes of page_cgroup
  134. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  135. [    0.000000] hpet clockevent registered
  136. [    0.000000] tsc: Fast TSC calibration using PIT
  137. [    0.000000] tsc: Detected 2693.201 MHz processor
  138. [    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5386.40 BogoMIPS (lpj=2693201)
  139. [    0.001008] pid_max: default: 32768 minimum: 301
  140. [    0.001039] Security Framework initialized
  141. [    0.001051] SELinux:  Initializing.
  142. [    0.001060] SELinux:  Starting in permissive mode
  143. [    0.002061] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  144. [    0.003185] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  145. [    0.003776] Mount-cache hash table entries: 256
  146. [    0.004044] Initializing cgroup subsys cpuacct
  147. [    0.004047] Initializing cgroup subsys memory
  148. [    0.004061] Initializing cgroup subsys devices
  149. [    0.004063] Initializing cgroup subsys freezer
  150. [    0.004064] Initializing cgroup subsys net_cls
  151. [    0.004065] Initializing cgroup subsys blkio
  152. [    0.004067] Initializing cgroup subsys perf_event
  153. [    0.004098] CPU: Physical Processor ID: 0
  154. [    0.004099] CPU: Processor Core ID: 0
  155. [    0.004101] mce: CPU supports 6 MCE banks
  156. [    0.004110] CPU0: Thermal monitoring enabled (TM2)
  157. [    0.004114] process: using mwait in idle threads
  158. [    0.004119] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
  159. [    0.004119] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
  160. [    0.004119] tlb_flushall_shift is 0xffffffff
  161. [    0.005711] ACPI: Core revision 20120711
  162. [    0.008006] ftrace: allocating 23337 entries in 92 pages
  163. [    0.014452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  164. [    0.024653] smpboot: CPU0: Intel Pentium(R) Dual-Core  CPU      E5400  @ 2.70GHz stepping 0a
  165. [    0.024996] APIC calibration not consistent with PM-Timer: 118ms instead of 100ms
  166. [    0.024996] APIC delta adjusted to PM-Timer: 1246864 (1483754)
  167. [    0.024996] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
  168. [    0.024996] ... version:                2
  169. [    0.024996] ... bit width:              40
  170. [    0.024996] ... generic registers:      2
  171. [    0.024996] ... value mask:             000000ffffffffff
  172. [    0.024996] ... max period:             000000007fffffff
  173. [    0.024996] ... fixed-purpose events:   3
  174. [    0.024996] ... event mask:             0000000700000003
  175. [    0.024996] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  176. [    0.024996] smpboot: Booting Node   0, Processors  #1
  177. [    0.037060] Brought up 2 CPUs
  178. [    0.037065] smpboot: Total of 2 processors activated (10772.80 BogoMIPS)
  179. [    0.038086] devtmpfs: initialized
  180. [    0.038157] PM: Registering ACPI NVS region [mem 0x7dd9e000-0x7dddffff] (270336 bytes)
  181. [    0.039307] atomic64 test passed for x86-64 platform with CX8 and with SSE
  182. [    0.039332] RTC time:  8:47:31, date: 11/16/12
  183. [    0.039371] NET: Registered protocol family 16
  184. [    0.039521] ACPI: bus type pci registered
  185. [    0.039573] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
  186. [    0.039575] PCI: not using MMCONFIG
  187. [    0.039576] PCI: Using configuration type 1 for base access
  188. [    0.040302] bio: create slab <bio-0> at 0
  189. [    0.040302] ACPI: Added _OSI(Module Device)
  190. [    0.040302] ACPI: Added _OSI(Processor Device)
  191. [    0.040302] ACPI: Added _OSI(3.0 _SCP Extensions)
  192. [    0.040302] ACPI: Added _OSI(Processor Aggregator Device)
  193. [    0.041217] ACPI: EC: Look up EC in DSDT
  194. [    0.042008] ACPI: Executed 1 blocks of module-level executable AML code
  195. [    0.043534] ACPI: SSDT 000000007dda0270 002B0 (v01 HPQOEM SLIC-BPC 00000011 INTL 20051117)
  196. [    0.043716] ACPI: Dynamic OEM Table Load:
  197. [    0.043718] ACPI: SSDT           (null) 002B0 (v01 HPQOEM SLIC-BPC 00000011 INTL 20051117)
  198. [    0.043812] ACPI: SSDT 000000007dda07d0 004B2 (v01 HPQOEM SLIC-BPC 00003001 INTL 20051117)
  199. [    0.043986] ACPI: Dynamic OEM Table Load:
  200. [    0.043989] ACPI: SSDT           (null) 004B2 (v01 HPQOEM SLIC-BPC 00003001 INTL 20051117)
  201. [    0.044155] ACPI: SSDT 000000007dda0520 002B0 (v01 HPQOEM SLIC-BPC 00000012 INTL 20051117)
  202. [    0.044339] ACPI: Dynamic OEM Table Load:
  203. [    0.044341] ACPI: SSDT           (null) 002B0 (v01 HPQOEM SLIC-BPC 00000012 INTL 20051117)
  204. [    0.044411] ACPI: SSDT 000000007dda0c90 00085 (v01 HPQOEM SLIC-BPC 00003000 INTL 20051117)
  205. [    0.044582] ACPI: Dynamic OEM Table Load:
  206. [    0.044584] ACPI: SSDT           (null) 00085 (v01 HPQOEM SLIC-BPC 00003000 INTL 20051117)
  207. [    0.044690] ACPI: Interpreter enabled
  208. [    0.044694] ACPI: (supports S0 S1 S3 S4 S5)
  209. [    0.044708] ACPI: Using IOAPIC for interrupt routing
  210. [    0.044726] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
  211. [    0.045445] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
  212. [    0.052152] ACPI: No dock devices found.
  213. [    0.052156] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  214. [    0.052282] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  215. [    0.052387] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
  216. [    0.052412] PCI host bridge to bus 0000:00
  217. [    0.052415] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
  218. [    0.052417] pci_bus 0000:00: root bus resource [bus 00-ff]
  219. [    0.052419] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
  220. [    0.052421] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
  221. [    0.052423] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  222. [    0.052425] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
  223. [    0.052426] pci_bus 0000:00: root bus resource [mem 0x7de00000-0xefffffff]
  224. [    0.052428] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfed8ffff]
  225. [    0.052437] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
  226. [    0.052476] pci 0000:00:02.0: [8086:2e22] type 00 class 0x030000
  227. [    0.052487] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
  228. [    0.052494] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
  229. [    0.052499] pci 0000:00:02.0: reg 20: [io  0xc080-0xc087]
  230. [    0.052531] pci 0000:00:02.1: [8086:2e23] type 00 class 0x038000
  231. [    0.052540] pci 0000:00:02.1: reg 10: [mem 0xfe900000-0xfe9fffff 64bit]
  232. [    0.052600] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
  233. [    0.052639] pci 0000:00:1a.0: reg 20: [io  0xc400-0xc41f]
  234. [    0.052685] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
  235. [    0.052724] pci 0000:00:1a.1: reg 20: [io  0xc480-0xc49f]
  236. [    0.052772] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
  237. [    0.052811] pci 0000:00:1a.2: reg 20: [io  0xc800-0xc81f]
  238. [    0.052866] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
  239. [    0.052885] pci 0000:00:1a.7: reg 10: [mem 0xfeafec00-0xfeafefff]
  240. [    0.052968] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
  241. [    0.052998] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
  242. [    0.053012] pci 0000:00:1b.0: reg 10: [mem 0xfeaf8000-0xfeafbfff 64bit]
  243. [    0.053073] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  244. [    0.053093] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
  245. [    0.053155] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  246. [    0.053180] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
  247. [    0.053242] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  248. [    0.053265] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
  249. [    0.053303] pci 0000:00:1d.0: reg 20: [io  0xc880-0xc89f]
  250. [    0.053350] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
  251. [    0.053389] pci 0000:00:1d.1: reg 20: [io  0xcc00-0xcc1f]
  252. [    0.053436] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
  253. [    0.053474] pci 0000:00:1d.2: reg 20: [io  0xd000-0xd01f]
  254. [    0.053531] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
  255. [    0.053550] pci 0000:00:1d.7: reg 10: [mem 0xfeaff800-0xfeaffbff]
  256. [    0.053633] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  257. [    0.053653] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
  258. [    0.053710] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
  259. [    0.053820] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
  260. [    0.053837] pci 0000:00:1f.2: reg 10: [io  0xd880-0xd887]
  261. [    0.053844] pci 0000:00:1f.2: reg 14: [io  0xd800-0xd803]
  262. [    0.053851] pci 0000:00:1f.2: reg 18: [io  0xd480-0xd487]
  263. [    0.053858] pci 0000:00:1f.2: reg 1c: [io  0xd400-0xd403]
  264. [    0.053866] pci 0000:00:1f.2: reg 20: [io  0xd080-0xd09f]
  265. [    0.053873] pci 0000:00:1f.2: reg 24: [mem 0xfeaff000-0xfeaff7ff]
  266. [    0.053914] pci 0000:00:1f.2: PME# supported from D3hot
  267. [    0.053931] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
  268. [    0.053944] pci 0000:00:1f.3: reg 10: [mem 0xfeaffc00-0xfeaffcff 64bit]
  269. [    0.053963] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
  270. [    0.054025] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
  271. [    0.054028] pci 0000:00:1c.0: PCI bridge to [bus 03]
  272. [    0.054068] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
  273. [    0.054088] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
  274. [    0.054104] pci 0000:02:00.0: reg 10: [io  0xe800-0xe8ff]
  275. [    0.054131] pci 0000:02:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
  276. [    0.054148] pci 0000:02:00.0: reg 20: [mem 0xfdffc000-0xfdffffff 64bit pref]
  277. [    0.054159] pci 0000:02:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
  278. [    0.054221] pci 0000:02:00.0: supports D1 D2
  279. [    0.054222] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  280. [    0.056015] pci 0000:00:1c.5: PCI bridge to [bus 02]
  281. [    0.056022] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
  282. [    0.056028] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
  283. [    0.056037] pci 0000:00:1c.5:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
  284. [    0.056066] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
  285. [    0.056119] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
  286. [    0.056132] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
  287. [    0.056137] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
  288. [    0.056141] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  289. [    0.056145] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
  290. [    0.056149] pci 0000:00:1e.0:   bridge window [mem 0x7de00000-0xefffffff] (subtractive decode)
  291. [    0.056153] pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xfed8ffff] (subtractive decode)
  292. [    0.056175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  293. [    0.056290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  294. [    0.056317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
  295. [    0.056401]  pci0000:00: Requesting ACPI _OSC control (0x1d)
  296. [    0.056553]  pci0000:00: ACPI _OSC control (0x1c) granted
  297. [    0.061970] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
  298. [    0.062010] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
  299. [    0.062042] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
  300. [    0.062075] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
  301. [    0.062110] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 6 7 10 11 12 14 15)
  302. [    0.062143] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 6 7 10 11 12 14 15)
  303. [    0.062177] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
  304. [    0.062211] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
  305. [    0.062267] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  306. [    0.062267] vgaarb: loaded
  307. [    0.062267] vgaarb: bridge control possible 0000:00:02.0
  308. [    0.062267] SCSI subsystem initialized
  309. [    0.062267] ACPI: bus type scsi registered
  310. [    0.062267] libata version 3.00 loaded.
  311. [    0.062267] ACPI: bus type usb registered
  312. [    0.062267] usbcore: registered new interface driver usbfs
  313. [    0.062267] usbcore: registered new interface driver hub
  314. [    0.062267] usbcore: registered new device driver usb
  315. [    0.062267] PCI: Using ACPI for IRQ routing
  316. [    0.063877] PCI: pci_cache_line_size set to 64 bytes
  317. [    0.063933] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
  318. [    0.063935] e820: reserve RAM buffer [mem 0x7dd90000-0x7fffffff]
  319. [    0.064041] NetLabel: Initializing
  320. [    0.064042] NetLabel:  domain hash size = 128
  321. [    0.064043] NetLabel:  protocols = UNLABELED CIPSOv4
  322. [    0.064053] NetLabel:  unlabeled traffic allowed by default
  323. [    0.064095] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
  324. [    0.064099] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  325. [    0.064103] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
  326. [    0.068012] Switching to clocksource hpet
  327. [    0.075106] pnp: PnP ACPI init
  328. [    0.075126] ACPI: bus type pnp registered
  329. [    0.075238] pnp 00:00: [bus 00-ff]
  330. [    0.075241] pnp 00:00: [io  0x0cf8-0x0cff]
  331. [    0.075243] pnp 00:00: [io  0x0000-0x0cf7 window]
  332. [    0.075247] pnp 00:00: [io  0x0d00-0xffff window]
  333. [    0.075249] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  334. [    0.075251] pnp 00:00: [mem 0x000d0000-0x000dffff window]
  335. [    0.075253] pnp 00:00: [mem 0x7de00000-0xefffffff window]
  336. [    0.075255] pnp 00:00: [mem 0xf4000000-0xfed8ffff window]
  337. [    0.075312] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  338. [    0.075320] pnp 00:01: [mem 0xfed14000-0xfed19fff]
  339. [    0.075322] pnp 00:01: [mem 0xfed90000-0xfed93fff]
  340. [    0.075369] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
  341. [    0.075372] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
  342. [    0.075375] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
  343. [    0.075402] pnp 00:02: [dma 4]
  344. [    0.075404] pnp 00:02: [io  0x0000-0x000f]
  345. [    0.075405] pnp 00:02: [io  0x0081-0x0083]
  346. [    0.075407] pnp 00:02: [io  0x0087]
  347. [    0.075409] pnp 00:02: [io  0x0089-0x008b]
  348. [    0.075410] pnp 00:02: [io  0x008f]
  349. [    0.075412] pnp 00:02: [io  0x00c0-0x00df]
  350. [    0.075429] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  351. [    0.075437] pnp 00:03: [io  0x0070-0x0071]
  352. [    0.075452] pnp 00:03: [irq 8]
  353. [    0.075472] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  354. [    0.075478] pnp 00:04: [io  0x0061]
  355. [    0.075496] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
  356. [    0.075502] pnp 00:05: [io  0x00f0-0x00ff]
  357. [    0.075507] pnp 00:05: [irq 13]
  358. [    0.075530] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
  359. [    0.075614] pnp 00:06: [io  0x0010-0x001f]
  360. [    0.075616] pnp 00:06: [io  0x0022-0x003f]
  361. [    0.075618] pnp 00:06: [io  0x0044-0x005f]
  362. [    0.075619] pnp 00:06: [io  0x0062-0x0063]
  363. [    0.075621] pnp 00:06: [io  0x0065-0x006f]
  364. [    0.075623] pnp 00:06: [io  0x0072-0x007f]
  365. [    0.075624] pnp 00:06: [io  0x0080]
  366. [    0.075626] pnp 00:06: [io  0x0084-0x0086]
  367. [    0.075627] pnp 00:06: [io  0x0088]
  368. [    0.075629] pnp 00:06: [io  0x008c-0x008e]
  369. [    0.075631] pnp 00:06: [io  0x0090-0x009f]
  370. [    0.075632] pnp 00:06: [io  0x00a2-0x00bf]
  371. [    0.075634] pnp 00:06: [io  0x00e0-0x00ef]
  372. [    0.075635] pnp 00:06: [io  0x04d0-0x04d1]
  373. [    0.075637] pnp 00:06: [io  0x0800-0x087f]
  374. [    0.075639] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
  375. [    0.075641] pnp 00:06: [io  0x0500-0x057f]
  376. [    0.075642] pnp 00:06: [mem 0xfed1c000-0xfed1ffff]
  377. [    0.075644] pnp 00:06: [mem 0xfed20000-0xfed3ffff]
  378. [    0.075646] pnp 00:06: [mem 0xfed40000-0xfed8ffff]
  379. [    0.075687] system 00:06: [io  0x04d0-0x04d1] has been reserved
  380. [    0.075689] system 00:06: [io  0x0800-0x087f] has been reserved
  381. [    0.075691] system 00:06: [io  0x0500-0x057f] has been reserved
  382. [    0.075694] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
  383. [    0.075699] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
  384. [    0.075701] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
  385. [    0.075704] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  386. [    0.075745] pnp 00:07: [mem 0xfed00000-0xfed003ff]
  387. [    0.075767] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
  388. [    0.075802] pnp 00:08: [mem 0xffb00000-0xffbfffff]
  389. [    0.075804] pnp 00:08: [mem 0xfff00000-0xffffffff]
  390. [    0.075825] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
  391. [    0.075856] pnp 00:09: [mem 0xffc00000-0xffefffff]
  392. [    0.075887] system 00:09: [mem 0xffc00000-0xffefffff] has been reserved
  393. [    0.075890] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
  394. [    0.075944] pnp 00:0a: [io  0x0060]
  395. [    0.075946] pnp 00:0a: [io  0x0064]
  396. [    0.075948] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
  397. [    0.075949] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
  398. [    0.075979] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
  399. [    0.075982] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
  400. [    0.075984] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  401. [    0.076056] pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
  402. [    0.076058] pnp 00:0b: [io  0x0a00-0x0adf]
  403. [    0.076093] system 00:0b: [io  0x0a00-0x0adf] has been reserved
  404. [    0.076096] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
  405. [    0.076121] pnp 00:0c: [mem 0xf0000000-0xf3ffffff]
  406. [    0.076153] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
  407. [    0.076156] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
  408. [    0.076273] pnp 00:0d: [mem 0x00000000-0x0009ffff]
  409. [    0.076275] pnp 00:0d: [mem 0x000c0000-0x000cffff]
  410. [    0.076277] pnp 00:0d: [mem 0x000e0000-0x000fffff]
  411. [    0.076279] pnp 00:0d: [mem 0x00100000-0x7ddfffff]
  412. [    0.076280] pnp 00:0d: [mem 0xfed90000-0xffffffff]
  413. [    0.076319] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
  414. [    0.076321] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
  415. [    0.076323] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
  416. [    0.076325] system 00:0d: [mem 0x00100000-0x7ddfffff] could not be reserved
  417. [    0.076327] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
  418. [    0.076330] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
  419. [    0.076421] pnp: PnP ACPI: found 14 devices
  420. [    0.076422] ACPI: ACPI bus type pnp unregistered
  421. [    0.082740] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
  422. [    0.082744] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
  423. [    0.082747] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
  424. [    0.082762] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
  425. [    0.082765] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
  426. [    0.082767] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
  427. [    0.082772] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7de00000-0x7dffffff]
  428. [    0.082774] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7e000000-0x7e1fffff 64bit pref]
  429. [    0.082777] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
  430. [    0.082779] pci 0000:00:1c.0: PCI bridge to [bus 03]
  431. [    0.082783] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
  432. [    0.082787] pci 0000:00:1c.0:   bridge window [mem 0x7de00000-0x7dffffff]
  433. [    0.082790] pci 0000:00:1c.0:   bridge window [mem 0x7e000000-0x7e1fffff 64bit pref]
  434. [    0.082796] pci 0000:00:1c.5: PCI bridge to [bus 02]
  435. [    0.082798] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
  436. [    0.082802] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
  437. [    0.082806] pci 0000:00:1c.5:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
  438. [    0.082811] pci 0000:00:1e.0: PCI bridge to [bus 01]
  439. [    0.082823] pci 0000:00:1c.0: enabling device (0104 -> 0107)
  440. [    0.082844] pci 0000:00:1e.0: setting latency timer to 64
  441. [    0.082848] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  442. [    0.082850] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  443. [    0.082852] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  444. [    0.082853] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
  445. [    0.082855] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xefffffff]
  446. [    0.082857] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xfed8ffff]
  447. [    0.082859] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
  448. [    0.082861] pci_bus 0000:03: resource 1 [mem 0x7de00000-0x7dffffff]
  449. [    0.082863] pci_bus 0000:03: resource 2 [mem 0x7e000000-0x7e1fffff 64bit pref]
  450. [    0.082865] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
  451. [    0.082866] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
  452. [    0.082868] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
  453. [    0.082870] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
  454. [    0.082872] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
  455. [    0.082874] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
  456. [    0.082875] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
  457. [    0.082877] pci_bus 0000:01: resource 8 [mem 0x7de00000-0xefffffff]
  458. [    0.082879] pci_bus 0000:01: resource 9 [mem 0xf4000000-0xfed8ffff]
  459. [    0.082915] NET: Registered protocol family 2
  460. [    0.083368] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  461. [    0.085471] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  462. [    0.086080] TCP: Hash tables configured (established 262144 bind 65536)
  463. [    0.086145] TCP: reno registered
  464. [    0.086157] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  465. [    0.086177] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  466. [    0.086305] NET: Registered protocol family 1
  467. [    0.086326] pci 0000:00:02.0: Boot video device
  468. [    0.086532] PCI: CLS 32 bytes, default 64
  469. [    0.086590] Unpacking initramfs...
  470. [    0.396018] Freeing initrd memory: 17704k freed
  471. [    0.405215] audit: initializing netlink socket (disabled)
  472. [    0.405235] type=2000 audit(1353055651.404:1): initialized
  473. [    0.421512] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  474. [    0.422998] VFS: Disk quotas dquot_6.5.2
  475. [    0.423048] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  476. [    0.423431] msgmni has been set to 3929
  477. [    0.423487] SELinux:  Registering netfilter hooks
  478. [    0.423861] alg: No test for stdrng (krng)
  479. [    0.423867] NET: Registered protocol family 38
  480. [    0.423903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  481. [    0.423928] io scheduler noop registered
  482. [    0.423929] io scheduler deadline registered
  483. [    0.423955] io scheduler cfq registered (default)
  484. [    0.424095] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
  485. [    0.424191] pcieport 0000:00:1c.5: irq 41 for MSI/MSI-X
  486. [    0.424277] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  487. [    0.424282] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  488. [    0.424296] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
  489. [    0.424298] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
  490. [    0.424301] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
  491. [    0.424314] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  492. [    0.424332] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  493. [    0.424333] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  494. [    0.424556] intel_idle: does not run on family 6 model 23
  495. [    0.424621] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  496. [    0.424625] ACPI: Power Button [PWRB]
  497. [    0.424656] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  498. [    0.424658] ACPI: Power Button [PWRF]
  499. [    0.424807] ACPI: Requesting acpi_cpufreq
  500. [    0.425815] Monitor-Mwait will be used to enter C-1 state
  501. [    0.425824] Monitor-Mwait will be used to enter C-2 state
  502. [    0.425829] tsc: Marking TSC unstable due to TSC halts in idle
  503. [    0.425837] ACPI: acpi_idle registered with cpuidle
  504. [    0.427714] GHES: HEST is not enabled!
  505. [    0.427780] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  506. [    0.428216] Non-volatile memory driver v1.3
  507. [    0.428218] Linux agpgart interface v0.103
  508. [    0.428288] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
  509. [    0.428335] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  510. [    0.428903] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
  511. [    0.429055] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
  512. [    0.429717] loop: module loaded
  513. [    0.429782] ahci 0000:00:1f.2: version 3.0
  514. [    0.429832] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
  515. [    0.429862] ahci: SSS flag set, parallel bus scan disabled
  516. [    0.429886] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
  517. [    0.429889] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
  518. [    0.429893] ahci 0000:00:1f.2: setting latency timer to 64
  519. [    0.436397] scsi0 : ahci
  520. [    0.436472] scsi1 : ahci
  521. [    0.436523] scsi2 : ahci
  522. [    0.436576] scsi3 : ahci
  523. [    0.436610] ata1: SATA max UDMA/133 abar m2048@0xfeaff000 port 0xfeaff100 irq 42
  524. [    0.436612] ata2: SATA max UDMA/133 abar m2048@0xfeaff000 port 0xfeaff180 irq 42
  525. [    0.436614] ata3: SATA max UDMA/133 abar m2048@0xfeaff000 port 0xfeaff200 irq 42
  526. [    0.436616] ata4: SATA max UDMA/133 abar m2048@0xfeaff000 port 0xfeaff280 irq 42
  527. [    0.436699] libphy: Fixed MDIO Bus: probed
  528. [    0.436758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  529. [    0.436783] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  530. [    0.436786] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  531. [    0.436830] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  532. [    0.440747] ehci_hcd 0000:00:1a.7: debug port 1
  533. [    0.440753] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
  534. [    0.440767] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeafec00
  535. [    0.446020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  536. [    0.446074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  537. [    0.446079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  538. [    0.446083] usb usb1: Product: EHCI Host Controller
  539. [    0.446087] usb usb1: Manufacturer: Linux 3.6.2-1.fc16.x86_64 ehci_hcd
  540. [    0.446091] usb usb1: SerialNumber: 0000:00:1a.7
  541. [    0.446236] hub 1-0:1.0: USB hub found
  542. [    0.446240] hub 1-0:1.0: 6 ports detected
  543. [    0.446307] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  544. [    0.446310] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  545. [    0.446342] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  546. [    0.450236] ehci_hcd 0000:00:1d.7: debug port 1
  547. [    0.450242] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  548. [    0.450254] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaff800
  549. [    0.456017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  550. [    0.456042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  551. [    0.456046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  552. [    0.456050] usb usb2: Product: EHCI Host Controller
  553. [    0.456054] usb usb2: Manufacturer: Linux 3.6.2-1.fc16.x86_64 ehci_hcd
  554. [    0.456058] usb usb2: SerialNumber: 0000:00:1d.7
  555. [    0.456208] hub 2-0:1.0: USB hub found
  556. [    0.456211] hub 2-0:1.0: 6 ports detected
  557. [    0.456267] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  558. [    0.456277] uhci_hcd: USB Universal Host Controller Interface driver
  559. [    0.456295] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  560. [    0.456298] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  561. [    0.456331] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  562. [    0.456359] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c400
  563. [    0.456388] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  564. [    0.456390] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  565. [    0.456392] usb usb3: Product: UHCI Host Controller
  566. [    0.456394] usb usb3: Manufacturer: Linux 3.6.2-1.fc16.x86_64 uhci_hcd
  567. [    0.456396] usb usb3: SerialNumber: 0000:00:1a.0
  568. [    0.456462] hub 3-0:1.0: USB hub found
  569. [    0.456466] hub 3-0:1.0: 2 ports detected
  570. [    0.456520] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  571. [    0.456523] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  572. [    0.456555] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  573. [    0.456585] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c480
  574. [    0.456614] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  575. [    0.456616] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  576. [    0.456618] usb usb4: Product: UHCI Host Controller
  577. [    0.456620] usb usb4: Manufacturer: Linux 3.6.2-1.fc16.x86_64 uhci_hcd
  578. [    0.456622] usb usb4: SerialNumber: 0000:00:1a.1
  579. [    0.456691] hub 4-0:1.0: USB hub found
  580. [    0.456694] hub 4-0:1.0: 2 ports detected
  581. [    0.456744] uhci_hcd 0000:00:1a.2: setting latency timer to 64
  582. [    0.456747] uhci_hcd 0000:00:1a.2: UHCI Host Controller
  583. [    0.456781] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
  584. [    0.456808] uhci_hcd 0000:00:1a.2: irq 20, io base 0x0000c800
  585. [    0.456835] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  586. [    0.456837] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  587. [    0.456839] usb usb5: Product: UHCI Host Controller
  588. [    0.456841] usb usb5: Manufacturer: Linux 3.6.2-1.fc16.x86_64 uhci_hcd
  589. [    0.456843] usb usb5: SerialNumber: 0000:00:1a.2
  590. [    0.456909] hub 5-0:1.0: USB hub found
  591. [    0.456912] hub 5-0:1.0: 2 ports detected
  592. [    0.456961] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  593. [    0.456963] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  594. [    0.456997] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
  595. [    0.457026] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c880
  596. [    0.457059] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  597. [    0.457061] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  598. [    0.457063] usb usb6: Product: UHCI Host Controller
  599. [    0.457065] usb usb6: Manufacturer: Linux 3.6.2-1.fc16.x86_64 uhci_hcd
  600. [    0.457066] usb usb6: SerialNumber: 0000:00:1d.0
  601. [    0.457136] hub 6-0:1.0: USB hub found
  602. [    0.457139] hub 6-0:1.0: 2 ports detected
  603. [    0.457189] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  604. [    0.457191] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  605. [    0.457224] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
  606. [    0.457244] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cc00
  607. [    0.457271] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  608. [    0.457273] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  609. [    0.457275] usb usb7: Product: UHCI Host Controller
  610. [    0.457276] usb usb7: Manufacturer: Linux 3.6.2-1.fc16.x86_64 uhci_hcd
  611. [    0.457278] usb usb7: SerialNumber: 0000:00:1d.1
  612. [    0.457346] hub 7-0:1.0: USB hub found
  613. [    0.457349] hub 7-0:1.0: 2 ports detected
  614. [    0.457397] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  615. [    0.457400] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  616. [    0.457431] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
  617. [    0.457451] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
  618. [    0.457478] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
  619. [    0.457480] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  620. [    0.457482] usb usb8: Product: UHCI Host Controller
  621. [    0.457484] usb usb8: Manufacturer: Linux 3.6.2-1.fc16.x86_64 uhci_hcd
  622. [    0.457485] usb usb8: SerialNumber: 0000:00:1d.2
  623. [    0.457558] hub 8-0:1.0: USB hub found
  624. [    0.457561] hub 8-0:1.0: 2 ports detected
  625. [    0.457641] usbcore: registered new interface driver usbserial
  626. [    0.457649] usbcore: registered new interface driver usbserial_generic
  627. [    0.457655] USB Serial support registered for generic
  628. [    0.457657] usbserial: USB Serial Driver core
  629. [    0.457689] i8042: PNP: No PS/2 controller found. Probing ports directly.
  630. [    0.459934] serio: i8042 KBD port at 0x60,0x64 irq 1
  631. [    0.459940] serio: i8042 AUX port at 0x60,0x64 irq 12
  632. [    0.460022] mousedev: PS/2 mouse device common for all mice
  633. [    0.460150] rtc_cmos 00:03: RTC can wake from S4
  634. [    0.460252] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  635. [    0.460275] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  636. [    0.460344] device-mapper: uevent: version 1.0.3
  637. [    0.460399] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
  638. [    0.460465] cpuidle: using governor ladder
  639. [    0.460497] cpuidle: using governor menu
  640. [    0.460592] EFI Variables Facility v0.08 2004-May-17
  641. [    0.460677] usbcore: registered new interface driver usbhid
  642. [    0.460678] usbhid: USB HID core driver
  643. [    0.460703] drop_monitor: Initializing network drop monitor service
  644. [    0.460784] ip_tables: (C) 2000-2006 Netfilter Core Team
  645. [    0.460810] TCP: cubic registered
  646. [    0.460813] Initializing XFRM netlink socket
  647. [    0.460918] NET: Registered protocol family 10
  648. [    0.461074] mip6: Mobile IPv6
  649. [    0.461076] NET: Registered protocol family 17
  650. [    0.461293] PM: Hibernation image not present or could not be loaded.
  651. [    0.461302] registered taskstats version 1
  652. [    0.461706]   Magic number: 4:316:776
  653. [    0.461821] rtc_cmos 00:03: setting system clock to 2012-11-16 08:47:31 UTC (1353055651)
  654. [    0.741043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  655. [    0.742061] ata1.00: ATA-8: ST3320418AS, HP35, max UDMA/100
  656. [    0.742065] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
  657. [    0.743217] ata1.00: configured for UDMA/100
  658. [    0.743403] scsi 0:0:0:0: Direct-Access     ATA      ST3320418AS      HP35 PQ: 0 ANSI: 5
  659. [    0.743684] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  660. [    0.743691] sd 0:0:0:0: Attached scsi generic sg0 type 0
  661. [    0.743790] sd 0:0:0:0: [sda] Write Protect is off
  662. [    0.743796] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  663. [    0.743831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  664. [    0.748035] usb 1-2: new high-speed USB device number 2 using ehci_hcd
  665. [    0.813783]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
  666. [    0.814390] sd 0:0:0:0: [sda] Attached SCSI disk
  667. [    1.048039] ata2: SATA link down (SStatus 0 SControl 300)
  668. [    1.128322] usb 1-2: New USB device found, idVendor=0bda, idProduct=0181
  669. [    1.128327] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  670. [    1.128331] usb 1-2: Product: USB2.0-CRW
  671. [    1.128335] usb 1-2: Manufacturer: Generic
  672. [    1.128339] usb 1-2: SerialNumber: 20060413092100000
  673. [    1.353040] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  674. [    1.356759] ata3.00: ATAPI: hp      DVD-RAM GH40L, RB0E, max UDMA/100
  675. [    1.361230] ata3.00: configured for UDMA/100
  676. [    1.369806] scsi 2:0:0:0: CD-ROM            hp       DVD-RAM GH40L    RB0E PQ: 0 ANSI: 5
  677. [    1.378940] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
  678. [    1.378944] cdrom: Uniform CD-ROM driver Revision: 3.20
  679. [    1.379129] sr 2:0:0:0: Attached scsi CD-ROM sr0
  680. [    1.379226] sr 2:0:0:0: Attached scsi generic sg1 type 5
  681. [    1.493035] usb 6-2: new low-speed USB device number 2 using uhci_hcd
  682. [    1.684038] ata4: SATA link down (SStatus 0 SControl 300)
  683. [    1.687231] Freeing unused kernel memory: 1028k freed
  684. [    1.687609] Write protecting the kernel read-only data: 12288k
  685. [    1.699080] Freeing unused kernel memory: 1888k freed
  686. [    1.707078] usb 6-2: New USB device found, idVendor=046d, idProduct=c06a
  687. [    1.707084] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  688. [    1.707089] usb 6-2: Product: USB Optical Mouse
  689. [    1.707093] usb 6-2: Manufacturer: Logitech
  690. [    1.708488] Freeing unused kernel memory: 1420k freed
  691. [    1.723327] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input2
  692. [    1.723416] hid-generic 0003:046D:C06A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0
  693. [    1.757578] dracut: dracut-018-60.git20120927.fc16
  694. [    1.799138] dracut: rd.luks=0: removing cryptoluks activation
  695. [    1.805812] dracut: rd.lvm=0: removing LVM activation
  696. [    1.817495] udevd[109]: starting version 173
  697. [    1.867040] [drm] Initialized drm 1.1.0 20060810
  698. [    1.875391] i915 0000:00:02.0: setting latency timer to 64
  699. [    1.895410] i915 0000:00:02.0: irq 43 for MSI/MSI-X
  700. [    1.895419] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  701. [    1.895420] [drm] Driver supports precise vblank timestamp query.
  702. [    1.895453] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  703. [    1.930024] usb 7-2: new low-speed USB device number 2 using uhci_hcd
  704. [    1.998718] fbcon: inteldrmfb (fb0) is primary device
  705. [    2.033437] Console: switching to colour frame buffer device 160x64
  706. [    2.039742] fb0: inteldrmfb frame buffer device
  707. [    2.039744] drm: registered panic notifier
  708. [    2.039809] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  709. [    2.046835] dracut: Starting plymouth daemon
  710. [    2.094299] usb 7-2: New USB device found, idVendor=0461, idProduct=0010
  711. [    2.094307] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  712. [    2.094312] usb 7-2: Product: USB Keyboard
  713. [    2.094316] usb 7-2: Manufacturer: NOVATEK
  714. [    2.112838] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input3
  715. [    2.113029] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.1-2/input0
  716. [    2.146368] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input4
  717. [    2.146488] hid-generic 0003:0461:0010.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.1-2/input1
  718. [    2.229987] dracut: rd.dm=0: removing DM RAID activation
  719. [    2.238831] dracut: rd.md=0: removing MD RAID activation
  720. [    2.355967] Initializing USB Mass Storage driver...
  721. [    2.364697] scsi4 : usb-storage 1-2:1.0
  722. [    2.364794] usbcore: registered new interface driver usb-storage
  723. [    2.364796] USB Mass Storage support registered.
  724. [    3.117753] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
  725. [    3.182368] dracut: Checking ext4: /dev/disk/by-uuid/a9b1e425-5bc6-46cd-ab01-e6e492309cc8
  726. [    3.182605] dracut: issuing e2fsck -a  /dev/disk/by-uuid/a9b1e425-5bc6-46cd-ab01-e6e492309cc8
  727. [    3.220286] dracut: _Fedora-16-x86_6: clean, 188222/1540096 files, 1607303/6144000 blocks
  728. [    3.221409] dracut: Remounting /dev/disk/by-uuid/a9b1e425-5bc6-46cd-ab01-e6e492309cc8 with -o ro
  729. [    3.245240] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
  730. [    3.248994] dracut: Mounted root filesystem /dev/sda6
  731. [    3.369484] scsi 4:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
  732. [    3.372605] scsi 4:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
  733. [    3.375601] scsi 4:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
  734. [    3.378601] scsi 4:0:0:3: Direct-Access     Generic- MS/MS-Pro/HG     1.00 PQ: 0 ANSI: 0 CCS
  735. [    3.381594] scsi 4:0:0:4: Direct-Access     Generic- SD/MMC/MS/MSPRO  1.00 PQ: 0 ANSI: 0 CCS
  736. [    3.382572] sd 4:0:0:0: Attached scsi generic sg2 type 0
  737. [    3.382883] sd 4:0:0:1: Attached scsi generic sg3 type 0
  738. [    3.383167] sd 4:0:0:2: Attached scsi generic sg4 type 0
  739. [    3.385537] sd 4:0:0:3: Attached scsi generic sg5 type 0
  740. [    3.385713] sd 4:0:0:4: Attached scsi generic sg6 type 0
  741. [    3.458460] sd 4:0:0:0: [sdb] Attached SCSI removable disk
  742. [    3.463860] sd 4:0:0:1: [sdc] Attached SCSI removable disk
  743. [    3.466344] sd 4:0:0:2: [sdd] Attached SCSI removable disk
  744. [    3.468722] sd 4:0:0:3: [sde] Attached SCSI removable disk
  745. [    3.471207] sd 4:0:0:4: [sdf] Attached SCSI removable disk
  746. [    3.477432] dracut: Switching root
  747. [    3.947697] type=1404 audit(1353055654.984:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  748. [    4.152847] SELinux: 2048 avtab hash slots, 98793 rules.
  749. [    4.169812] SELinux: 2048 avtab hash slots, 98793 rules.
  750. [    4.337717] SELinux:  9 users, 13 roles, 3953 types, 220 bools, 1 sens, 1024 cats
  751. [    4.337722] SELinux:  82 classes, 98793 rules
  752. [    4.341450] SELinux:  Permission wake_alarm in class capability2 not defined in policy.
  753. [    4.341453] SELinux:  Permission block_suspend in class capability2 not defined in policy.
  754. [    4.341457] SELinux: the above unknown classes and permissions will be allowed
  755. [    4.341470] SELinux:  Completing initialization.
  756. [    4.341471] SELinux:  Setting up existing superblocks.
  757. [    4.341481] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  758. [    4.341486] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  759. [    4.341502] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
  760. [    4.341507] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  761. [    4.341514] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  762. [    4.341537] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
  763. [    4.342127] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  764. [    4.342131] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  765. [    4.343606] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  766. [    4.343615] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
  767. [    4.343619] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  768. [    4.343635] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
  769. [    4.343641] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
  770. [    4.343647] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  771. [    4.343667] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  772. [    4.344491] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  773. [    4.344499] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  774. [    4.344526] SELinux: initialized (dev sda6, type ext4), uses xattr
  775. [    4.362112] type=1403 audit(1353055655.399:3): policy loaded auid=4294967295 ses=4294967295
  776. [    4.389529] systemd[1]: Successfully loaded SELinux policy in 485ms 585us.
  777. [    4.421317] systemd[1]: Successfully loaded SELinux database in 31ms 13us, size on heap is 485K.
  778. [    4.450198] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
  779. [    4.471157] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  780. [    4.478068] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  781. [    4.532349] systemd[1]: Relabelled /dev and /run in 54ms 159us.
  782. [    4.556092] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  783. [    4.561066] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  784. [    4.566098] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  785. [    4.571068] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  786. [    4.576046] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  787. [    4.581051] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  788. [    4.586093] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  789. [    4.591047] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  790. [    4.591143] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
  791. [    4.631164] systemd[1]: Set hostname to <dev.fei.tuke.sk>.
  792. [    5.989016] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
  793. [    9.158738] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
  794. [    9.159335] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
  795. [    9.159583] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
  796. [    9.161776] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  797. [    9.252568] udevd[495]: starting version 173
  798. [   10.108542] EXT4-fs (sda6): re-mounted. Opts: (null)
  799. [   12.278813] mtp-probe[697]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2"
  800. [   12.280975] mtp-probe[697]: bus: 7, device: 2 was not an MTP device
  801. [   12.283282] mtp-probe[699]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2"
  802. [   12.284078] mtp-probe[700]: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2"
  803. [   12.285514] mtp-probe[700]: bus: 6, device: 2 was not an MTP device
  804. [   12.286538] mtp-probe[699]: bus: 1, device: 2 was not an MTP device
  805. [   12.901573] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
  806. [   12.905008] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
  807. [   12.909614] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
  808. [   12.912738] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
  809. [   12.917082] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  810. [   13.460901] RPC: Registered named UNIX socket transport module.
  811. [   13.460906] RPC: Registered udp transport module.
  812. [   13.460908] RPC: Registered tcp transport module.
  813. [   13.460910] RPC: Registered tcp NFSv4.1 backchannel transport module.
  814. [   13.461945] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
  815. [   13.495884] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  816. [   13.496089] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
  817. [   13.496256] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000035e000, f4:ce:46:f1:6d:9d, XID 081000c0 IRQ 44
  818. [   13.496258] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  819. [   13.825749] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
  820. [   13.859072] fedora-storage-init[801]: Setting up Logical Volume Management:   No volume groups found
  821. [   13.867444] fedora-storage-init[801]: [  OK  ]
  822. [   14.082293] hda_codec: ALC888: SKU not ready 0x411111f0
  823. [   14.082303] ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
  824. [   14.082307] ALSA sound/pci/hda/hda_auto_parser.c:326    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  825. [   14.082310] ALSA sound/pci/hda/hda_auto_parser.c:330    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  826. [   14.082312] ALSA sound/pci/hda/hda_auto_parser.c:331    mono: mono_out=0x0
  827. [   14.082315] ALSA sound/pci/hda/hda_auto_parser.c:334    dig-out=0x1e/0x0
  828. [   14.082317] ALSA sound/pci/hda/hda_auto_parser.c:335    inputs:
  829. [   14.082320] ALSA sound/pci/hda/hda_auto_parser.c:339      Rear Mic=0x18
  830. [   14.082325] ALSA sound/pci/hda/hda_auto_parser.c:339      Front Mic=0x19
  831. [   14.082328] ALSA sound/pci/hda/hda_auto_parser.c:339      Line=0x1c
  832. [   14.084705] ALSA sound/pci/hda/patch_realtek.c:1334 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
  833. [   14.084706] ALSA sound/pci/hda/patch_realtek.c:1417 realtek: Enable default setup for auto mode as fallback
  834. [   14.099304] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
  835. [   14.099528] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
  836. [   14.099610] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
  837. [   14.099684] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
  838. [   14.099762] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
  839. [   14.099840] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  840. [   14.099918] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  841. [   14.099994] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  842. [   14.100527] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
  843. [   14.271527] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20120711/utaddress-251)
  844. [   14.271538] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  845. [   14.271572] lpc_ich: Resource conflict(s) found affecting gpio_ich
  846. [   14.279201] udev-configure-printer[921]: add /bus/pci/drivers/lpc_ich
  847. [   14.279354] iTCO_vendor_support: vendor-support=0
  848. [   14.279745] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
  849. [   14.279847] udev-configure-printer[921]: Failed to get parent
  850. [   14.279915] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
  851. [   14.280153] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  852. [   14.281888] udev-configure-printer[920]: add /module/lpc_ich
  853. [   14.282394] udev-configure-printer[920]: Failed to get parent
  854. [   14.444875] fuse init (API version 7.20)
  855. [   14.450094] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
  856. [   14.458460] mount[927]: mount: fusectl already mounted or /sys/fs/fuse/connections busy
  857. [   14.458743] mount[927]: mount: according to mtab, fusectl is already mounted on /sys/fs/fuse/connections
  858. [   14.459450] systemd[1]: sys-fs-fuse-connections.mount mount process exited, code=exited status=32
  859. [   14.548692] fedora-storage-init[858]: Setting up Logical Volume Management:   No volume groups found
  860. [   14.558983] fedora-storage-init[858]: [  OK  ]
  861. [   14.851675] SELinux: initialized (dev sda3, type fuseblk), uses genfs_contexts
  862. [   14.853032] ntfs-3g[937]: Version 2011.4.12 integrated FUSE 27
  863. [   14.853061] ntfs-3g[937]: Mounted /dev/sda3 (Read-Write, label "", NTFS 3.1)
  864. [   14.853079] ntfs-3g[937]: Cmdline options: rw
  865. [   14.853095] ntfs-3g[937]: Mount options: rw,allow_other,nonempty,atime,fsname=/dev/sda3,blkdev,blksize=4096
  866. [   14.853113] ntfs-3g[937]: Ownership and permissions disabled, configuration type 1
  867. [   14.932893] Adding 3318780k swap on /dev/sda7.  Priority:0 extents:1 across:3318780k
  868. [   15.051493] systemd-fsck[852]: /dev/sda5: clean, 11561/1794048 files, 596510/7168000 blocks
  869. [   15.314541] lvm[930]: No volume groups found
  870. [   15.351433] SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
  871. [   15.352608] ntfs-3g[944]: Version 2011.4.12 integrated FUSE 27
  872. [   15.352614] ntfs-3g[944]: Mounted /dev/sda2 (Read-Write, label "", NTFS 3.1)
  873. [   15.352618] ntfs-3g[944]: Cmdline options: rw
  874. [   15.352622] ntfs-3g[944]: Mount options: rw,allow_other,nonempty,atime,fsname=/dev/sda2,blkdev,blksize=4096
  875. [   15.352625] ntfs-3g[944]: Ownership and permissions disabled, configuration type 1
  876. [   15.431950] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  877. [   15.431961] SELinux: initialized (dev sda5, type ext4), uses xattr
  878. [   15.461435] systemd-tmpfiles[949]: Successfully loaded SELinux database in 15ms 514us, size on heap is 486K.
  879. [   15.688337] abrtd[980]: Init complete, entering main loop
  880. [   15.689919] ip6_tables: (C) 2000-2006 Netfilter Core Team
  881. [   15.692433] auditctl[969]: No rules
  882. [   15.692440] auditctl[969]: AUDIT_STATUS: enabled=0 flag=1 pid=0 rate_limit=0 backlog_limit=320 lost=0 backlog=0
  883. [   15.697803] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  884. [   15.701770] iptables.init[960]: iptables: Applying firewall rules: [  OK  ]
  885. [   15.704856] ip6tables.init[961]: ip6tables: Applying firewall rules: [  OK  ]
  886. [   15.712991] auditd[964]: Started dispatcher: /sbin/audispd pid: 1008
  887. [   15.714076] audispd[1008]: priority_boost_parser called with: 4
  888. [   15.714083] audispd[1008]: max_restarts_parser called with: 10
  889. [   15.714660] audispd[1008]: audispd initialized with q_depth=120 and 1 active plugins
  890. [   15.765870] NetworkManager[1015]: <info> NetworkManager (version 0.9.4-6.git20120521.fc16) is starting...
  891. [   15.765878] NetworkManager[1015]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
  892. [   15.765882] NetworkManager[1015]: <info> WEXT support is enabled
  893. [   15.816789] auditd[964]: Init complete, auditd 2.2.1 listening for events (startup state enable)
  894. [   15.830043] avahi-daemon[1039]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
  895. [   15.830057] avahi-daemon[1039]: Successfully dropped root privileges.
  896. [   15.830473] avahi-daemon[1039]: avahi-daemon 0.6.30 starting up.
  897. [   15.831510] avahi-daemon[1039]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
  898. [   15.929577] chronyd[1047]: chronyd version 1.26-20110831gitb088b7 starting
  899. [   15.930263] chronyd[1047]: Linux kernel major=3 minor=6 patch=2
  900. [   15.930296] chronyd[1047]: hz=100 shift_hz=7 freq_scale=1.00000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000
  901. [   15.931885] chronyd[1047]: Frequency -16.360 +- 3.595 ppm read from /var/lib/chrony/drift
  902. [   16.181570] Loading iSCSI transport class v2.0-870.
  903. [   16.183668] iscsi: registered transport (tcp)
  904. [   16.221348] r8169 0000:02:00.0: eth0: link down
  905. [   16.221391] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  906. [   16.227828] iscsi: registered transport (iser)
  907. [   16.237204] 8021q: 802.1Q VLAN Support v1.8
  908. [   16.240025] r8169 0000:02:00.0: eth0: link down
  909. [   16.242298] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
  910. [   16.242301] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
  911. [   16.244837] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
  912. [   16.244874] iscsi: registered transport (cxgb3i)
  913. [   16.253172] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
  914. [   16.253579] iscsi: registered transport (cxgb4i)
  915. [   16.290610] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
  916. [   16.291947] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
  917. [   16.292313] iscsi: registered transport (bnx2i)
  918. [   16.298653] iscsi: registered transport (be2iscsi)
  919. [   16.390000] netlink: 12 bytes leftover after parsing attributes.
  920. [   16.390024] netlink: 12 bytes leftover after parsing attributes.
  921. [   16.390258] netlink: 12 bytes leftover after parsing attributes.
  922. [   17.854594] r8169 0000:02:00.0: eth0: link up
  923. [   17.854609] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  924. [ 2212.408112] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
  925. [ 2256.384944] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  926. [ 2471.415748] gftp-gtk[2339]: segfault at 0 ip 0000000000422df9 sp 00007fff4f6826d0 error 4 in gftp-gtk[400000+4d000]
  927. [ 3862.936051] usb 2-6: new high-speed USB device number 4 using ehci_hcd
  928. [ 3863.052282] usb 2-6: New USB device found, idVendor=3538, idProduct=0059
  929. [ 3863.052289] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  930. [ 3863.052294] usb 2-6: SerialNumber: 19015202037238560009
  931. [ 3863.052948] scsi5 : usb-storage 2-6:1.0
  932. [ 3864.056945] scsi 5:0:0:0: Direct-Access     pqi      IntelligentStick 0.00 PQ: 0 ANSI: 2
  933. [ 3864.057887] sd 5:0:0:0: Attached scsi generic sg7 type 0
  934. [ 3864.058936] sd 5:0:0:0: [sdg] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB)
  935. [ 3864.060211] sd 5:0:0:0: [sdg] Write Protect is off
  936. [ 3864.060217] sd 5:0:0:0: [sdg] Mode Sense: 00 00 00 00
  937. [ 3864.061069] sd 5:0:0:0: [sdg] Asking for cache data failed
  938. [ 3864.061074] sd 5:0:0:0: [sdg] Assuming drive cache: write through
  939. [ 3864.064930] sd 5:0:0:0: [sdg] Asking for cache data failed
  940. [ 3864.064937] sd 5:0:0:0: [sdg] Assuming drive cache: write through
  941. [ 3864.171718]  sdg:
  942. [ 3864.284686] sd 5:0:0:0: [sdg] Asking for cache data failed
  943. [ 3864.284694] sd 5:0:0:0: [sdg] Assuming drive cache: write through
  944. [ 3864.284699] sd 5:0:0:0: [sdg] Attached SCSI removable disk
  945. [ 3866.814084] SELinux: initialized (dev sdg, type vfat), uses genfs_contexts
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top