Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2017.09-rockchip-ayufan-1065-g95f6152134 (Aug 26 2019 - 12:41:34 +0000)
- Model: Pine64 RockPro64
- DRAM: 2 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- normal boot
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 20
- Card did not respond to voltage select!
- mmc_init: -95, time 9
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB EHCI 1.00
- USB2: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- USB3: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- scanning bus 3 for devices... 2 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- Device 0: Vendor: Samsung Rev: 0 Prod: Portable SSD T5
- Type: Hard Disk
- Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
- ... is now current device
- Scanning usb 0:7...
- Found /boot/extlinux/extlinux.conf
- Retrieving file: /boot/extlinux/extlinux.conf
- 2017 bytes read in 192 ms (9.8 KiB/s)
- select kernel
- 1: kernel-5.4.0-rc1-1120-ayufan-gf8639cacc398
- 2: kernel-5.4.0-rc1-1120-ayufan-gf8639cacc398-memtest
- 3: kernel-4.4.190-1233-rockchip-ayufan-gd3f1be0ed310
- 4: kernel-4.4.190-1233-rockchip-ayufan-gd3f1be0ed310-memtest
- Enter choice: 1: kernel-5.4.0-rc1-1120-ayufan-gf8639cacc398
- Retrieving file: /boot/initrd.img-5.4.0-rc1-1120-ayufan-gf8639cacc398
- 4551282 bytes read in 417 ms (10.4 MiB/s)
- Retrieving file: /boot/vmlinuz-5.4.0-rc1-1120-ayufan-gf8639cacc398
- 31166976 bytes read in 1511 ms (19.7 MiB/s)
- append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
- Retrieving file: /boot/dtbs/5.4.0-rc1-1120-ayufan-gf8639cacc398/rockchip/rk3399b
- 56621 bytes read in 794 ms (69.3 KiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to 7daa9000, end 7df00272 ... OK
- Loading Device Tree to 000000007da98000, end 000000007daa8d2c ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.4.0-rc1-1120-ayufan-gf8639cacc398 (root@runner-f9
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007ffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x7ebb1800-0x7ebb2fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 22 pages/cpu s53144 r8192 d28776 u90112
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 2002432K/2095104K available (18684K kernel code, 2020K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 988 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7e080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x000000007e040000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007e05000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x458 wi0
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.003319] Console: colour dummy device 80x25
- [ 0.003750] printk: console [tty0] enabled
- [ 0.004154] printk: bootconsole [uart8250] disabled
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.4.0-rc1-1120-ayufan-gf8639cacc398 (root@runner-f9
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007ffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x7ebb1800-0x7ebb2fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 22 pages/cpu s53144 r8192 d28776 u90112
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 2002432K/2095104K available (18684K kernel code, 2020K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 988 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7e080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x000000007e040000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007e05000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x458 wi0
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.003319] Console: colour dummy device 80x25
- [ 0.003750] printk: console [tty0] enabled
- [ 0.004154] printk: bootconsole [uart8250] disabled
- [ 0.004736] Calibrating delay loop (skipped), value calculated using timer f)
- [ 0.004772] pid_max: default: 32768 minimum: 301
- [ 0.004914] LSM: Security Framework initializing
- [ 0.005021] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, lin)
- [ 0.005056] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.027377] ASID allocator initialised with 32768 entries
- [ 0.035370] rcu: Hierarchical SRCU implementation.
- [ 0.043516] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.043956] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
- [ 0.048413] EFI services will not be available.
- [ 0.056435] smp: Bringing up secondary CPUs ...
- [ 0.088659] Detected VIPT I-cache on CPU1
- [ 0.088700] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.088717] GICv3: CPU1: using allocated LPI pending table @0x000000007e06000
- [ 0.088767] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.120728] Detected VIPT I-cache on CPU2
- [ 0.120758] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.120772] GICv3: CPU2: using allocated LPI pending table @0x000000007e07000
- [ 0.120805] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.152826] Detected VIPT I-cache on CPU3
- [ 0.152854] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.152868] GICv3: CPU3: using allocated LPI pending table @0x000000007e10000
- [ 0.152899] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.187628] CPU features: detected: EL2 vector hardening
- [ 0.187968] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.188347] Detected PIPT I-cache on CPU4
- [ 0.189588] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.190047] GICv3: CPU4: using allocated LPI pending table @0x000000007e11000
- [ 0.191274] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.231304] Detected PIPT I-cache on CPU5
- [ 0.232499] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.232925] GICv3: CPU5: using allocated LPI pending table @0x000000007e12000
- [ 0.234011] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.239071] smp: Brought up 1 node, 6 CPUs
- [ 0.239476] SMP: Total of 6 processors activated.
- [ 0.239508] CPU features: detected: 32-bit EL0 Support
- [ 0.239541] CPU features: detected: CRC32 instructions
- [ 0.464270] CPU: All CPU(s) started at EL2
- [ 0.465124] alternatives: patching kernel code
- [ 0.470350] devtmpfs: initialized
- [ 0.492972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
- [ 0.493242] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.494956] xor: measuring software checksum speed
- [ 0.536299] 8regs : 1152.000 MB/sec
- [ 0.575952] 32regs : 52.000 MB/sec
- [ 0.616087] arm64_neon: 48.000 MB/sec
- [ 0.616771] xor: using function: 8regs (1152.000 MB/sec)
- [ 0.617729] pinctrl core: initialized pinctrl subsystem
- [ 0.678969] DMI not present or invalid.
- [ 0.699765] NET: Registered protocol family 16
- [ 0.819939] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.821100] audit: initializing netlink subsys (disabled)
- [ 0.830569] audit: type=2000 audit(0.824:1): state=initialized audit_enabled1
- [ 0.893904] cpuidle: using governor menu
- [ 0.919761] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.992640] Serial: AMBA PL011 UART driver
- [ 3.626217] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 3.627344] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 3.628190] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 3.629397] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 3.995666] cryptd: max_cpu_qlen set to 1000
- [ 4.740030] raid6: neonx8 gen() 26 MB/s
- [ 4.806941] raid6: neonx8 xor() 21 MB/s
- [ 4.877000] raid6: neonx4 gen() 23 MB/s
- [ 4.945072] raid6: neonx4 xor() 20 MB/s
- [ 5.015329] raid6: neonx2 gen() 17 MB/s
- [ 5.085071] raid6: neonx2 xor() 20 MB/s
- [ 5.156976] raid6: neonx1 gen() 13 MB/s
- [ 5.224860] raid6: neonx1 xor() 15 MB/s
- [ 5.294649] raid6: int64x8 gen() 12 MB/s
- [ 5.361921] raid6: int64x8 xor() 9 MB/s
- [ 5.433898] raid6: int64x4 gen() 12 MB/s
- [ 5.502898] raid6: int64x4 xor() 10 MB/s
- [ 5.576671] raid6: int64x2 gen() 9 MB/s
- [ 5.643479] raid6: int64x2 xor() 8 MB/s
- [ 5.715955] raid6: int64x1 gen() 6 MB/s
- [ 5.786628] raid6: int64x1 xor() 6 MB/s
- [ 5.787281] raid6: using algorithm neonx8 gen() 26 MB/s
- [ 5.787909] raid6: .... xor() 21 MB/s, rmw enabled
- [ 5.788525] raid6: using neon recovery algorithm
- [ 5.819757] ACPI: Interpreter disabled.
- [ 5.856537] iommu: Default domain type: Translated
- [ 5.879727] rk_iommu ff650800.iommu: IRQ index 1 not found
- [ 5.896331] rk_iommu ff8f3f00.iommu: IRQ index 1 not found
- [ 5.912210] rk_iommu ff903f00.iommu: IRQ index 1 not found
- [ 5.927894] rk_iommu ff914000.iommu: IRQ index 1 not found
- [ 5.943281] rk_iommu ff924000.iommu: IRQ index 1 not found
- [ 5.954814] vgaarb: loaded
- [ 5.970353] SCSI subsystem initialized
- [ 5.992063] usbcore: registered new interface driver usbfs
- [ 5.995168] usbcore: registered new interface driver hub
- [ 5.999976] usbcore: registered new device driver usb
- [ 6.059683] mc: Linux media interface: v0.10
- [ 6.061838] videodev: Linux video capture interface: v2.00
- [ 6.066066] pps_core: LinuxPPS API ver. 1 registered
- [ 6.066784] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 6.068135] PTP clock support registered
- [ 6.118458] Advanced Linux Sound Architecture Driver Initialized.
- [ 6.141480] Bluetooth: Core ver 2.22
- [ 6.143531] NET: Registered protocol family 31
- [ 6.144210] Bluetooth: HCI device and connection manager initialized
- [ 6.145074] Bluetooth: HCI socket layer initialized
- [ 6.146280] Bluetooth: L2CAP socket layer initialized
- [ 6.147404] Bluetooth: SCO socket layer initialized
- [ 6.148945] NetLabel: Initializing
- [ 6.149947] NetLabel: domain hash size = 128
- [ 6.150517] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 6.153792] NetLabel: unlabeled traffic allowed by default
- [ 6.191490] clocksource: Switched to clocksource arch_sys_counter
- [ 6.201613] VFS: Disk quotas dquot_6.6.0
- [ 6.205622] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 6.221984] pnp: PnP ACPI: disabled
- [ 6.551669] thermal_sys: Registered thermal governor 'step_wise'
- [ 6.551861] thermal_sys: Registered thermal governor 'power_allocator'
- [ 6.580892] NET: Registered protocol family 2
- [ 6.612214] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 163)
- [ 6.616101] TCP established hash table entries: 16384 (order: 5, 131072 byte)
- [ 6.627998] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, line)
- [ 6.647829] TCP: Hash tables configured (established 16384 bind 16384)
- [ 6.653925] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 6.658646] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 6.669981] NET: Registered protocol family 1
- [ 6.698868] RPC: Registered named UNIX socket transport module.
- [ 6.700492] RPC: Registered udp transport module.
- [ 6.701111] RPC: Registered tcp transport module.
- [ 6.701712] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 6.723040] PCI: CLS 0 bytes, default 64
- [ 6.733810] Trying to unpack rootfs image as initramfs...
- [ 22.741905] Freeing initrd memory: 4444K
- [ 22.793331] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
- [ 22.809339] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
- [ 22.830909] kvm [1]: IPA Size Limit: 40bits
- [ 22.882810] kvm [1]: vgic-v2@fff20000
- [ 22.885235] kvm [1]: GIC system register CPU interface enabled
- [ 22.893587] kvm [1]: vgic interrupt IRQ10
- [ 22.904120] kvm [1]: Hyp mode initialized successfully
- [ 34.025711] workingset: timestamp_bits=44 max_order=19 bucket_order=0
- [ 34.459914] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 34.496857] NFS: Registering the id_resolver key type
- [ 34.498318] Key type id_resolver registered
- [ 34.499614] Key type id_legacy registered
- [ 34.500685] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 34.501423] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 34.558520] fuse: init (API version 7.31)
- [ 34.585567] 9p: Installing v9fs 9p2000 file system support
- [ 36.604884] NET: Registered protocol family 38
- [ 36.606030] Key type asymmetric registered
- [ 36.606715] Asymmetric key parser 'x509' registered
- [ 36.609850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 36.616968] io scheduler mq-deadline registered
- [ 36.617851] io scheduler kyber registered
- [ 38.274422] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 38.276454] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
- [ 38.350274] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 38.352154] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
- [ 38.859976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 38.953072] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud =A
- [ 38.988040] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud =A
- [ 39.308186] printk: console [ttyS2] enabled
- [ 39.393969] SuperH (H)SCI(F) driver initialized
- [ 39.440204] msm_serial: driver initialized
- [ 40.172065] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 40.610748] brd: module loaded
- [ 41.064539] loop: module loaded
- [ 42.392380] spi-nor spi0.0: gd25q128 (16384 Kbytes)
- [ 42.861683] rockchip-spi ff1d0000.spi: chipselect 0 already in use
- [ 42.864404] spi_master spi0: spi_device register error /spi@ff1d0000/spi-fla0
- [ 42.866625] spi_master spi0: Failed to create SPI device for /spi@ff1d0000/s0
- [ 42.991871] libphy: Fixed MDIO Bus: probed
- [ 43.036728] tun: Universal TUN/TAP device driver, 1.6
- [ 43.140427] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 43.142062] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 43.145981] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
- [ 43.148344] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 43.152140] igbvf: Intel(R) Gigabit Virtual Function Network Driver - versiok
- [ 43.154107] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 43.190403] sky2: driver version 1.30
- [ 43.303926] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
- [ 43.305942] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
- [ 43.312373] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 43.314614] rk_gmac-dwmac fe300000.ethernet: no regulator found
- [ 43.316893] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 43.318826] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 43.321016] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
- [ 43.322751] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 43.328355] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
- [ 43.330178] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 43.337653] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 43.345164] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 43.348114] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 43.349747] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
- [ 43.352287] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
- [ 43.354285] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 43.356275] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 43.358094] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 43.361415] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 43.363600] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 43.365217] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
- [ 44.264209] libphy: stmmac: probed
- [ 44.265952] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8)
- [ 44.269491] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8)
- [ 44.392283] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet drr
- [ 44.397571] usbcore: registered new interface driver pegasus
- [ 44.401566] usbcore: registered new interface driver rtl8150
- [ 44.405433] usbcore: registered new interface driver r8152
- [ 44.409181] usbcore: registered new interface driver asix
- [ 44.412844] usbcore: registered new interface driver ax88179_178a
- [ 44.416807] usbcore: registered new interface driver cdc_ether
- [ 44.420581] usbcore: registered new interface driver dm9601
- [ 44.424325] usbcore: registered new interface driver CoreChips
- [ 44.428302] usbcore: registered new interface driver smsc75xx
- [ 44.432544] usbcore: registered new interface driver smsc95xx
- [ 44.436279] usbcore: registered new interface driver net1080
- [ 44.439941] usbcore: registered new interface driver plusb
- [ 44.443591] usbcore: registered new interface driver cdc_subset
- [ 44.446869] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
- [ 44.452283] usbcore: registered new interface driver cdc_ncm
- [ 44.460637] VFIO - User Level meta-driver version: 0.3
- [ 44.585098] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
- [ 44.588156] dwc3 fe800000.dwc3: IRQ otg not found
- [ 44.589735] dwc3 fe800000.dwc3: IRQ dwc_usb3 not found
- [ 44.600085] dwc3 fe800000.dwc3: IRQ host not found
- [ 44.601824] dwc3 fe800000.dwc3: IRQ dwc_usb3 not found
- [ 44.684732] dwc3 fe900000.dwc3: IRQ host not found
- [ 44.686612] dwc3 fe900000.dwc3: IRQ dwc_usb3 not found
- [ 44.791908] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 44.793811] ehci-pci: EHCI PCI platform driver
- [ 44.797439] ehci-platform: EHCI generic platform driver
- [ 44.813615] ehci-platform fe380000.usb: EHCI Host Controller
- [ 44.816795] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
- [ 44.824029] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
- [ 44.840749] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 44.873665] hub 1-0:1.0: USB hub found
- [ 44.876892] hub 1-0:1.0: 1 port detected
- [ 44.907678] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 44.910362] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
- [ 44.917691] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
- [ 44.936596] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 44.966039] hub 2-0:1.0: USB hub found
- [ 44.969520] hub 2-0:1.0: 1 port detected
- [ 45.005026] ehci-orion: EHCI orion driver
- [ 45.018316] ehci-exynos: EHCI EXYNOS driver
- [ 45.030237] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 45.033059] ohci-pci: OHCI PCI platform driver
- [ 45.037555] ohci-platform: OHCI generic platform driver
- [ 45.049287] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 45.052381] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
- [ 45.060157] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
- [ 45.152731] hub 3-0:1.0: USB hub found
- [ 45.156294] hub 3-0:1.0: 1 port detected
- [ 45.181744] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 45.184858] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
- [ 45.191699] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
- [ 45.289565] hub 4-0:1.0: USB hub found
- [ 45.292780] hub 4-0:1.0: 1 port detected
- [ 45.322704] ohci-exynos: OHCI EXYNOS driver
- [ 45.366982] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 45.370234] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
- [ 45.377686] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
- [ 45.381297] xhci-hcd xhci-hcd.0.auto: irq 228, io mem 0xfe800000
- [ 45.418023] hub 5-0:1.0: USB hub found
- [ 45.421246] hub 5-0:1.0: 1 port detected
- [ 45.441555] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 45.444335] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
- [ 45.446746] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 45.452295] usb usb6: We don't know the algorithms for LPM for this host, di.
- [ 45.482723] hub 6-0:1.0: USB hub found
- [ 45.485808] hub 6-0:1.0: 1 port detected
- [ 45.510614] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 45.513534] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
- [ 45.521273] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
- [ 45.526217] xhci-hcd xhci-hcd.1.auto: irq 229, io mem 0xfe900000
- [ 45.570820] hub 7-0:1.0: USB hub found
- [ 45.574341] hub 7-0:1.0: 1 port detected
- [ 45.592558] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 45.594584] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
- [ 45.597540] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 45.602880] usb usb8: We don't know the algorithms for LPM for this host, di.
- [ 45.633223] hub 8-0:1.0: USB hub found
- [ 45.636508] hub 8-0:1.0: 1 port detected
- [ 45.678507] usbcore: registered new interface driver usb-storage
- [ 45.996544] i2c /dev entries driver
- [ 46.190286] rk808 0-001b: chip id: 0x0
- [ 46.348035] rk808-rtc rk808-rtc: registered as rtc0
- [ 46.584975] rockchip-rga ff680000.rga: HW Version: 0x03.02
- [ 46.599868] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
- [ 46.915584] Bluetooth: HCI UART driver ver 2.3
- [ 47.002668] sdhci: Secure Digital Host Controller Interface driver
- [ 47.005037] sdhci: Copyright(c) Pierre Ossman
- [ 47.029394] Synopsys Designware Multimedia Card Interface Driver
- [ 47.094293] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mod.
- [ 47.097592] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
- [ 47.100112] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
- [ 47.103960] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bio
- [ 47.110484] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
- [ 47.112833] mmc_host mmc0: card is non-removable.
- [ 47.141851] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 47.186138] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
- [ 47.189451] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
- [ 47.192003] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
- [ 47.195800] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bio
- [ 47.201579] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
- [ 47.223678] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 47.230593] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 47.232284] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 47.239613] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 47.250608] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 47.313825] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 47.325629] random: fast init done
- [ 47.387662] mmc2: CQHCI version 5.10
- [ 47.432627] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 5000000)
- [ 47.434941] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
- [ 47.637048] ledtrig-cpu: registered to indicate activity on CPUs
- [ 47.731746] usbcore: registered new interface driver usbhid
- [ 47.733427] usbhid: USB HID core driver
- [ 47.841578] dwmmc_rockchip fe310000.dwmmc: All phases work, using default ph.
- [ 48.002650] mmc0: new ultra high speed SDR104 SDIO card at address 0001
- [ 48.346378] xt_time: kernel timezone is -0000
- [ 48.350002] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
- [ 48.353603] IPVS: Connection hash table configured (size=4096, memory=64Kbyt)
- [ 48.365176] IPVS: ipvs loaded.
- [ 48.366415] IPVS: [rr] scheduler registered.
- [ 48.368207] IPVS: [wrr] scheduler registered.
- [ 48.369503] IPVS: [lc] scheduler registered.
- [ 48.370696] IPVS: [wlc] scheduler registered.
- [ 48.372476] IPVS: [fo] scheduler registered.
- [ 48.373729] IPVS: [ovf] scheduler registered.
- [ 48.376052] IPVS: [lblc] scheduler registered.
- [ 48.377664] IPVS: [lblcr] scheduler registered.
- [ 48.379670] IPVS: [dh] scheduler registered.
- [ 48.380942] IPVS: [sh] scheduler registered.
- [ 48.382140] IPVS: [sed] scheduler registered.
- [ 48.383831] IPVS: [nq] scheduler registered.
- [ 48.406904] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
- [ 48.415678] Initializing XFRM netlink socket
- [ 48.450062] NET: Registered protocol family 10
- [ 48.509819] Segment Routing with IPv6
- [ 48.533069] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 48.563979] NET: Registered protocol family 17
- [ 48.567982] bridge: filtering via arp/ip/ip6tables is no longer available by.
- [ 48.576086] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 48.577981] Bluetooth: HIDP socket layer initialized
- [ 48.581605] 8021q: 802.1Q VLAN Support v1.8
- [ 48.590874] 9pnet: Installing 9P2000 support
- [ 48.594666] Key type dns_resolver registered
- [ 48.631914] registered taskstats version 1
- [ 48.697696] Btrfs loaded, crc32c=crc32c-generic
- [ 50.721934] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 50.757314] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T09:04:32)
- [ 50.760368] of_cfs_init
- [ 50.763728] of_cfs_init: OK
- [ 50.780448] ALSA device list:
- [ 50.781250] No soundcards found.
- [ 50.782977] platform regulatory.0: Direct firmware load for regulatory.db fa2
- [ 50.783018] ttyS2 - failed to request DMA
- [ 50.785012] cfg80211: failed to load regulatory.db
- [ 50.785850] Freeing unused kernel memory: 1408K
- [ 50.818922] Run /init as init process
- Loading, please wait...
- [ 52.034365] tmpfs: Unknown parameter 'size'
- mount: Invalid argument
- Starting version 241
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Begin: Waiting for root file system ... Begin: Running /scripts/local-block ....
- Begin: Running /scripts/local-block ... done.
- [ 97.825873] random: crng init done
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- Begin: Running /scripts/local-block ... done.
- done.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement