Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- C1:80000000
- C2
- ?
- C3h
- SD card is detected !!
- C4
- Command 0x00000000
- interrupt 0x98010424 = 0x00000002
- Command pass
- response 0x98010589 = 0x000000A0
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000000
- response 0x9801058D = 0x00000000
- response 0x9801058E = 0x00000000
- Command 0x00000008
- interrupt 0x98010424 = 0x00000002
- Command pass
- response 0x98010589 = 0x00000008
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000001
- response 0x9801058D = 0x000000AA
- response 0x9801058E = 0x00000013
- Command 0x00000037
- interrupt 0x98010424 = 0x00000002
- Command pass
- response 0x98010589 = 0x00000037
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000001
- response 0x9801058D = 0x00000020
- response 0x9801058E = 0x00000083
- AppCommand 0x00000029
- interrupt 0x98010424 = 0x00000002
- Command pass
- response 0x98010589 = 0x0000003F
- response 0x9801058A = 0x00000041
- response 0x9801058B = 0x000000FF
- response 0x9801058C = 0x00000080
- response 0x9801058D = 0x00000000
- response 0x9801058E = 0x000000FF
- Command 0x00000037
- interrupt 0x98010424 = 0x00000002
- Command pass
- response 0x98010589 = 0x00000037
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000001
- response 0x9801058D = 0x00000020
- response 0x9801058E = 0x00000083
- AppCommand 0x00000029
- interrupt 0x98010424 = 0x00000002
- Command pass
- response 0x98010589 = 0x0000003F
- response 0x9801058A = 0x000000C1
- response 0x9801058B = 0x000000FF
- response 0x9801058C = 0x00000080
- response 0x9801058D = 0x00000000
- response 0x9801058E = 0x000000FF
- card powerup status = 0x000000C1
- card capacity status = 0x00000001
- can switch to 1.8V = 0x00000001
- Command 0x0000000B
- interrupt 0x98010424 = 0x00000002
- Command pass
- response 0x98010589 = 0x0000000B
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000003
- response 0x9801058D = 0x00000020
- response 0x9801058E = 0x000000BD
- wait 0x98010585[4:0] 0
- wait 0x98010585[4:0] done
- wait 0x98010585[4:0] 1
- wait 0x98010585[4:0] done
- Command 0x00000002
- interrupt 0x98010424 = 0x00000012
- Command pass
- response 0x98010589 = 0x00000081
- response 0x9801058A = 0x00000038
- response 0x9801058B = 0x00000009
- response 0x9801058C = 0x00000000
- response 0x9801058D = 0x000000FC
- response 0x9801058E = 0x00000019
- CID 0xA0000 = 0x%x
- 4F539C3F
- CID 0xA0004 = 0x%x
- 30445355
- CID 0xA0008 = 0x%x
- 81441030
- CID 0xA000C = 0x%x
- FC000938
- Command 0x00000003
- interrupt 0x98010424 = 0x00000012
- Command pass
- response 0x98010589 = 0x00000003
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000002
- response 0x9801058C = 0x00000005
- response 0x9801058D = 0x00000000
- response 0x9801058E = 0x00000047
- RCA = 0x00000002
- Command 0x00000007
- interrupt 0x98010424 = 0x00000012
- Command pass
- response 0x98010589 = 0x00000007
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000007
- response 0x9801058D = 0x00000000
- response 0x9801058E = 0x00000075
- SD card has been initialized.
- Command 0x00000037
- interrupt 0x98010424 = 0x00000012
- Command pass
- response 0x98010589 = 0x00000037
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000009
- response 0x9801058D = 0x00000020
- response 0x9801058E = 0x00000033
- AppCommand 0x00000006
- interrupt 0x98010424 = 0x00000012
- Command pass
- response 0x98010589 = 0x00000006
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000009
- response 0x9801058D = 0x00000020
- response 0x9801058E = 0x000000B9
- 4-bit bus width
- SDR12/normal mode.
- Command 0x00000006
- interrupt 0x98010424 = 0x00000012
- Command pass
- response 0x98010589 = 0x00000006
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000009
- response 0x9801058D = 0x00000000
- response 0x9801058E = 0x000000DD
- DMA finished
- cr_auto_Read_Write_1, cmd_idx = 0x00000012
- Command pass
- response 0x98010589 = 0x0000000C
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x0000000B
- response 0x9801058D = 0x00000000
- response 0x9801058E = 0x0000007F
- interrupt 0x98010424 = 0x00000012
- Command 0x0000000D
- interrupt 0x98010424 = 0x00000002
- Command pass
- response 0x98010589 = 0x0000000D
- response 0x9801058A = 0x00000000
- response 0x9801058B = 0x00000000
- response 0x9801058C = 0x00000009
- response 0x9801058D = 0x00000000
- response 0x9801058E = 0x0000003F
- 64b
- U-Boot 2015.07 (May 11 2018 - 16:41:59 +0800)
- CPU : Cortex-A53 Quad Core - AARCH64
- Board: Realtek QA Board
- DRAM: 2 GiB
- Watchdog: Disabled
- mapping memory 0x20000000-0x40000000 non-cached
- flushing dcache successfully.
- SD:
- SD device index# 0
- mmc->scr[0]=2358003,mmc->scr[1]=0
- SD: init done, no error
- SD: capacity 31342592 sectors(0x1de4000), (15304 MB)
- Factory: SD
- [FAC] No factory data in SD
- ------------can't find tmp/factory/000BootParam.h
- [ENV] read_env from factory failed
- Using default environment
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- HDMITx_HPD=False
- ------------can't find tmp/factory/video_rpc.bin
- tv_system=25 mode=1
- Net: Realtek PCIe GBE Family Controller mcfg = 0024
- dev->name=r8168#0
- Checking default environment
- Hit Esc or Tab key to enter console mode or rescue linux: 0
- ------------can't find tmp/factory/recovery
- ======== Checking into android recovery ====
- ==== boot_from_sd (boot from SD mode; secure_mode 0)=====
- reading sd.dtb
- 58131 bytes read in 6 ms (9.2 MiB/s)
- Loading "sd.dtb" to 0x02100000 is OK.
- reading sd.uImage
- 10630032 bytes read in 502 ms (20.2 MiB/s)
- Loading "sd.uImage" to 0x03000000 is OK.
- reading bluecore.audio
- 3338288 bytes read in 163 ms (19.5 MiB/s)
- Loading "bluecore.audio" to 0x01b00000 is OK.
- Start Audio Firmware ...
- flushing dcache successfully.
- [AUDIO]RosStartTaskCreateHook!
- [AUDIO][WARNING]power saving config, magic 0x06000000 != 0x80838665
- [FW]kylin_bring up hwsetting
- Finish kylin_bring_temp hwsetting
- [+][AO][aio_HWEnable]
- [AO]aio_CRTOn:
- SYS_CLOCK_ENABLE1 [ 0x9800000c]: 0x93fec561
- [AO]aio_PowerControlHDMIOn:
- set SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd851e416
- SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd851e416
- [AO]aio_PowerControlDACOn_clk:
- SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd85fe416
- [AO]aio_PowerControlSPDIFOn:
- set SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd87fe416
- SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd87fe416
- [AO]aio_PowerControlI2SOn:
- set SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd8ffe416
- SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd8ffe416
- SYS_SOFT_RESET1 [ 0x98000000]: 0xbfda1001
- SYS_SOFT_RESET4 [ 0x98000050]: 0x0000801f
- [-][AO][aio_HWEnable]
- [Audio]SetTickRate 0x000000c8
- [ACPU] Set protect, start: 0x00000000 end: 0x00001000 moduleid:6
- HDMI Raw Enable: AC3 DTS MPEG2 AAC DDP MLP
- SPDIF Raw Enable: AC3 DTS MPEG2 AAC MLP
- Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO
- [AO][InitHDMIVideoType]HDMI Frequecny 148, resolution 25
- [aio_RPCAnalogAudio]1
- [AO]ao_SetDACAnalogOn:
- AIO_O_ACANA_GCTL1 [ 0x98006604]: 0x24951504
- AIO_I_ACANA_ADC_GCTL2 [ 0x98006610]: 0x880a3a00
- AIO_I_ADC_TCON [ 0x980066fc]: 0x221f0000
- AIO_I_ADC_TCON [ 0x980066fc]: 0x221fff00
- @@@@@@@One Step TV System magic number = 0xc0de0bee, addr = 0xa001f800@@@@@@@
- @@@@@@@@@ boot_info->tv_sys.interfaceType 0
- vo->hdr_ctrl.hdr_out_ctrl_mode:0
- [VO]HDRModeConfig:vo->tv_cap.tv_type:0
- HDMIOff = 0
- [VO]vo->is_hdmi_off_clock_on:0
- [VO_SetVideoStandard]st 25 p 1 1 0
- [VO_SetVideoStandard]dp_standard:1 data0 0x00000004 data1 0x00000000
- [VO_SetVideoStandard]HDMIoff 0 is_tve_on 1 user_cvbs_off 0
- lvds.format 0 port_setting 0x00000381 lvds_wb 0
- vo->mixer_call_dsr: 0x00000000
- [VO setTVStandard 25 3D 0 0]
- (TVE) TVE_DAC_mode 0,cmd->enProg 1!!
- TV_NTSC_J
- ~~comp 0, ch2 1, mode_3D 0!!
- ~~comp 0, ch2 1, mode_3D 0!!
- ~~TVE standard#
- SetVideoStandard return!
- (VO_ConfigHDMI_InfoFrame) L:276, is_hdmi_plugin 1, hdmiMode 1!!Mode 1 dataByte1 0x00000000 0x00000000 0x00000000
- dataByte4 0x00000000 0x00000000 int0 0x00000001
- (HDMI_3D) mode 1, HDMI_gen 1, En_3D 0, Format_3D 0 scramble:0!!RGB_or_YCbCr:0 Pixel_Colocrt:0 Deep_Color:0 Deep_Depth:0 xvycc:0
- @@vo->hdr_ctrl.trans:0 HDMI_gen_dynamic_range_master_infoframe
- @@set C1C0 to 2(BT709),set EC2EC1EC0 to 0
- go back SET_HDMI!!
- boot_info 0xa0000000 magic 0xf94bff7f en 255
- [AO][_AO_if_video_HDMI_mode]HDMI not enabled
- [AO][+]_AO_setup_default_audio_infoframe
- [AO][--]_AO_hdmi_disable(0)
- [AUDIO WARNING]
- [AO][_AO_hdmi_disable]do nothing, HDMI not enable 0x00000000 0x00000001
- Audio_Channel_Count 1 :2CH, audio_layout:0
- HDMI_Frequency 148 :1080p50,1080p60
- Sampling_Frequency 3 :48K
- CTS = 148500, N = 6144
- [+][HDMI_gen_audio_infoframe]
- CA:2CH: L,R
- [-][HDMI_gen_audio_infoframe]
- SYS_PLL_PSAUDA1 [ 0x98000130]: 0x0050022d
- [AO][++]_AO_hdmi_enable(0)
- [AUDIO WARNING]
- [AO][_AO_hdmi_enable]do nothing, HDMI not enable 0x00000000 0x00000001
- [AO][-]_AO_setup_default_audio_infoframe
- [Info] convert some env variable to fdt:factory node
- libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
- Info: Try to add new node /factory...
- *****************************************
- factory {
- ipaddr = "192.168.100.1";
- ethaddr = "00:10:20:30:40:50";
- };
- *****************************************
- Wrong Image Format for do_booti command
- ERROR: can't get kernel image!
- ## Flattened Device Tree blob at 02100000
- Booting using the fdt blob at 0x2100000
- reserving fdt memory region: addr=0 size=30000
- reserving fdt memory region: addr=1f000 size=1000
- reserving fdt memory region: addr=2c00000 size=d400000
- reserving fdt memory region: addr=1b00000 size=400000
- reserving fdt memory region: addr=10200000 size=f800000
- reserving fdt memory region: addr=1ffe000 size=4000
- reserving fdt memory region: addr=20000000 size=5000000
- reserving fdt memory region: addr=10000000 size=14000
- Using Device Tree in place at 0000000002100000, end 0000000002111312
- WARNING: could not set resume-entry-addr FDT_ERR_BADOFFSET.
- [FDT] mac = 00:10:20:30:40:50
- [FDT] update MAC address
- Bring UP slave CPUs
- Starting Kernel ...
- flushing dcache successfully.
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 4.4.18-ning (ning@ubuntu) (gcc version 4.9.4 (OpenWrt/Linaro GCC 4.9-2015.06 r48422) ) #2 SMP Thu Apr 26 18:38:15 PDT 2018
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] earlycon: Early serial console at MMIO32 0x98007800 (options '')
- [ 0.000000] bootconsole [uart0] enabled
- [ 0.000000] cma: Reserved 32 MiB at 0x000000007e000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv0.1 detected in firmware.
- [ 0.000000] psci: Conflicting PSCI version detected.
- [ 0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc07df5e000 s39424 r8192 d30208 u77824
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516096
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0x98007800 console=ttyS0,115200 loglevel=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Memory: 1457624K/2097152K available (7294K kernel code, 396K rwdata, 2192K rodata, 448K init, 576K bss, 606760K reserved, 32768K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
- [ 0.000000] .init : 0xffffff8008bd0000 - 0xffffff8008c40000 ( 448 KB)
- [ 0.000000] .text : 0xffffff8008280000 - 0xffffff80089a0000 ( 7296 KB)
- [ 0.000000] .rodata : 0xffffff80089a0000 - 0xffffff8008bd0000 ( 2240 KB)
- [ 0.000000] .data : 0xffffff8008c40000 - 0xffffff8008ca32c8 ( 397 KB)
- [ 0.000000] vmemmap : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 GB maximum)
- [ 0.000000] 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB actual)
- [ 0.000000] fixed : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 KB)
- [ 0.000000] PCI I/O : 0xffffffbf00000000 - 0xffffffbf02000000 ( 32 MB)
- [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
- [ 0.000006] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
- [ 0.009106] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_SHUTDOWN
- [ 0.015285] [RTK-TIMER0] clocksource 0 register HZ
- [ 0.020682] clocksource: rtk_timer0_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 579169832313 ns
- [ 0.032387] [RTK-TIMER0] set mode: CLOCK_EVT_MODE_SHUTDOWN
- [ 0.038565] [RTK-TIMER1] set mode: CLOCK_EVT_MODE_SHUTDOWN
- [ 0.044743] [RTK-TIMER1] clocksource 1 register HZ
- [ 0.050137] clocksource: rtk_timer1_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 579169832313 ns
- [ 0.062237] [RTK_MEM_REMAP] initialized
- [ 0.066878] Console: colour dummy device 80x25
- [ 0.071895] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=270000)
- [ 0.083571] pid_max: default: 32768 minimum: 301
- [ 0.088955] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.096516] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.105193] Initializing cgroup subsys memory
- [ 0.110135] Initializing cgroup subsys devices
- [ 0.115148] Initializing cgroup subsys freezer
- [ 0.120166] Initializing cgroup subsys pids
- [ 0.125148] ASID allocator initialised with 65536 entries
- [ 0.138193] pctrl-rtk: addr: 0x0802c00c [0x93fec561 -> 0x137ec561], bit-diff = 0x80800000, mask = 0xec803012
- [ 0.149300] pctrl-rtk: addr: 0x0802e010 [0xd8ffe416 -> 0xd8ff0414], bit-diff = 0x0000e002, mask = 0x0100e0a2
- [ 0.160405] pctrl-rtk: addr: 0x0803008c [0x00001f01 -> 0x00001901], bit-diff = 0x00000600, mask = 0x000006f8
- [ 0.171506] pctrl-rtk: addr: 0x08032000 [0xbfda1001 -> 0x9fda1001], bit-diff = 0x20000000, mask = 0x60000354
- [ 0.182608] pctrl-rtk: addr: 0x08034004 [0x1f840e01 -> 0x0f840e01], bit-diff = 0x10000000, mask = 0x507be1fc
- [ 0.193709] pctrl-rtk: addr: 0x08036050 [0x0000801f -> 0x0000801f], bit-diff = 0x00000000, mask = 0x00007020
- [ 0.204808] pctrl-rtk: addr: 0x08038088 [0x00001f80 -> 0x00001f80], bit-diff = 0x00000000, mask = 0x00002062
- [ 0.215943] pctrl-rtk: pctrl_ve1::POWER_OFF, ret = 0
- [ 0.221601] pctrl-rtk: pctrl_ve2::POWER_OFF, ret = 0
- [ 0.227265] pctrl-rtk: pctrl_ve3::POWER_OFF, ret = 0
- [ 0.232963] pctrl-rtk: pctrl_gpu::POWER_OFF, ret = 0
- [ 0.238647] pctrl-rtk: pctrl_gpu_core_1::POWER_OFF, ret = 0
- [ 0.245015] pctrl-rtk: pctrl_gpu_core_2::POWER_OFF, ret = 0
- [ 0.251402] pctrl-rtk: pctrl_gpu_core_3::POWER_OFF, ret = 0
- [ 0.257998] pctrl-rtk: pctrl_mhl3_en::POWER_OFF, ret = 0
- [ 0.264770] pctrl-rtk: pctrl_l4_icg_nand::ENABLE_HW_PM, ret = -1
- [ 0.271585] pctrl-rtk: pctrl_usb_p0_mac::POWER_ON, ret = 0
- [ 0.277832] pctrl-rtk: pctrl_usb_p0_phy::POWER_ON, ret = 0
- [ 0.284176] pctrl-rtk: pctrl_usb_p3_mac_A: rev not match
- [ 0.290210] pctrl-rtk: pctrl_usb_p3_mac::POWER_ON, ret = 0
- [ 0.296427] pctrl-rtk: pctrl_usb_p3_phy::POWER_ON, ret = 0
- [ 0.302871] pctrl-rtk: pctrl_cr::POWER_OFF, ret = 0
- [ 0.308474] reset-rtk: DEASSERT 0x0801c004 [0x0f840e01 -> 0x0f841e01] D 0x00001000, M 0x00001000
- [ 0.318681] reset-rtk: ASSERT 0x0801c004 [0x0f841e01 -> 0x0f840e01] D 0x00001000, M 0x00001000
- [ 0.328880] pctrl-rtk: pctrl_sdio::POWER_OFF, ret = 0
- [ 0.334965] pctrl-rtk: pctrl_pll_ve1::POWER_OFF, ret = 0
- [ 0.341895] Detected VIPT I-cache on CPU1
- [ 0.341941] CPU1: Booted secondary processor [410fd034]
- [ 0.342306] Detected VIPT I-cache on CPU2
- [ 0.342339] CPU2: Booted secondary processor [410fd034]
- [ 0.342701] Detected VIPT I-cache on CPU3
- [ 0.342736] CPU3: Booted secondary processor [410fd034]
- [ 0.342796] Brought up 4 CPUs
- [ 0.377320] SMP: Total of 4 processors activated.
- [ 0.382620] CPU: All CPU(s) started at EL2
- [ 0.387256] alternatives: patching kernel code
- [ 0.392852] devtmpfs: initialized
- [ 0.409404] clk-rtk: scpu,pll,workaround 34055501
- [ 0.414700] clk-rtk: scpu,pll,workaround 04038500
- [ 0.421356] clk-rtk: Failed to init pll_gpu, ret = -22
- [ 0.427213] clk-rtk: Failed to init pll_acpu, ret = -22
- [ 0.435809] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.448422] xor: measuring software checksum speed
- [ 0.546962] 8regs : 1152.800 MB/sec
- [ 0.647018] 8regs_prefetch: 1086.400 MB/sec
- [ 0.747075] 32regs : 1318.400 MB/sec
- [ 0.847136] 32regs_prefetch: 1189.600 MB/sec
- [ 0.852334] xor: using function: 32regs (1318.400 MB/sec)
- [ 0.858447] pinctrl core: initialized pinctrl subsystem
- [ 0.865100] NET: Registered protocol family 16
- [ 0.870863] vdso: 2 pages (1 code @ ffffff80089a6000, 1 data @ ffffff8008c44000)
- [ 0.880246] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.887639] rst-control : base ffffff8008242600, offset 0x40
- [ 0.894046] ****** rtk_lockapi_init 568, chip_revision = 0x00030000
- [ 0.901291] [PINCTRL] driver init
- [ 0.908210] [PINCTRL] init done
- [ 1.125444] raid6: int64x1 gen() 191 MB/s
- [ 1.295369] raid6: int64x1 xor() 182 MB/s
- [ 1.465428] raid6: int64x2 gen() 299 MB/s
- [ 1.635445] raid6: int64x2 xor() 264 MB/s
- [ 1.805607] raid6: int64x4 gen() 444 MB/s
- [ 1.975653] raid6: int64x4 xor() 321 MB/s
- [ 2.145694] raid6: int64x8 gen() 557 MB/s
- [ 2.315851] raid6: int64x8 xor() 345 MB/s
- [ 2.485950] raid6: neonx1 gen() 329 MB/s
- [ 2.655998] raid6: neonx1 xor() 319 MB/s
- [ 2.826105] raid6: neonx2 gen() 562 MB/s
- [ 2.996129] raid6: neonx2 xor() 488 MB/s
- [ 3.166211] raid6: neonx4 gen() 741 MB/s
- [ 3.336296] raid6: neonx4 xor() 541 MB/s
- [ 3.506371] raid6: neonx8 gen() 780 MB/s
- [ 3.676491] raid6: neonx8 xor() 559 MB/s
- [ 3.681299] raid6: using algorithm neonx8 gen() 780 MB/s
- [ 3.687285] raid6: .... xor() 559 MB/s, rmw enabled
- [ 3.692775] raid6: using intx1 recovery algorithm
- [ 3.698221] ACPI: Interpreter disabled.
- [ 3.702599] [RTD129x_PM] Initial RTD129x Power Management Driver.
- [ 3.710009] [RTD129x_PM] wakeup-gpio Cnt: en(2) act(2) list(2)
- [ 3.716591] [RTD129x_PM] wakeup-gpio[0] States is disable! (en:0 act:0 gpio:115)
- [ 3.724976] [RTD129x_PM] wakeup-gpio[1] Successful registration! (en:1 act:0 gpio:134)
- [ 3.733898] [RTD129x_PM] gpio-output-change Cnt: en(0) act(0) list(-2)
- [ 3.741258] [RTD129x_PM] Set suspend-mode = ram
- [ 3.746359] [RTD129x_PM] Wakeup Flags Set Default : 0x2e
- [ 3.752689] SCSI subsystem initialized
- [ 3.757101] usbcore: registered new interface driver usbfs
- [ 3.763343] usbcore: registered new interface driver hub
- [ 3.769404] usbcore: registered new device driver usb
- [ 3.775214] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ENTER rtk_usb_power_manager_probe
- [ 3.785534] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_drd status is okay
- [ 3.795142] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u2host status is okay
- [ 3.805049] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ehci status is okay
- [ 3.813873] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ohci status is okay
- [ 3.822710] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u3host status is okay
- [ 3.832623] rtk-usb-power-manager 98000000.rtk_usb_power_manager: set usb_power_domain/p3 on
- [ 3.842189] reset-rtk: ASSERT 0x08028000 [0x9fda1001 -> 0x9fda1001] D 0x00000000, M 0x00000100
- [ 3.852389] reset-rtk: ASSERT 0x08028000 [0x9fda1001 -> 0x9fda1001] D 0x00000000, M 0x00000200
- [ 3.862588] reset-rtk: ASSERT 0x08028004 [0x0f840e01 -> 0x0f840e01] D 0x00000000, M 0x00000008
- [ 3.872787] reset-rtk: ASSERT 0x08028004 [0x0f840e01 -> 0x0f840e01] D 0x00000000, M 0x00000004
- [ 3.882985] reset-rtk: ASSERT 0x08028000 [0x9fda1001 -> 0x9fda1001] D 0x00000000, M 0x00000004
- [ 3.893186] reset-rtk: ASSERT 0x08028004 [0x0f840e01 -> 0x0f840e01] D 0x00000000, M 0x00000010
- [ 3.903385] reset-rtk: ASSERT 0x0801a000 [0x9fda1001 -> 0x9fda1001] D 0x00000000, M 0x00000010
- [ 3.913584] reset-rtk: ASSERT 0x0801c004 [0x0f840e01 -> 0x0f840e01] D 0x00000000, M 0x00000020
- [ 3.923781] reset-rtk: ASSERT 0x0801a000 [0x9fda1001 -> 0x9fda1001] D 0x00000000, M 0x00000040
- [ 3.936990] reset-rtk: DEASSERT 0x0801a000 [0x9fda1305 -> 0x9fda1315] D 0x00000010, M 0x00000010
- [ 3.947190] reset-rtk: DEASSERT 0x0801c004 [0x0f840e1d -> 0x0f840e3d] D 0x00000020, M 0x00000020
- [ 3.957388] reset-rtk: DEASSERT 0x0801a000 [0x9fda1315 -> 0x9fda1355] D 0x00000040, M 0x00000040
- [ 3.970593] rtk-usb-power-manager 98000000.rtk_usb_power_manager: Realtek USB init 5/5 OK (CRT_SOFT_RESET1=9fda1355, CRT_SOFT_RESET2=f840e3d, CRT_CLOCK_ENABLE1=137ec571)
- [ 3.987686] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_power_manager_probe OK (take 220 ms)
- [ 4.001153] Advanced Linux Sound Architecture Driver Initialized.
- [ 4.008791] clocksource: Switched to clocksource arch_sys_counter
- [ 4.015988] FS-Cache: Loaded
- [ 4.019547] pnp: PnP ACPI: disabled
- [ 4.023634] drivers/soc/realtek/rtd129x/rtk_ion_of.c rtk_ion_probe
- [ 4.031607] drivers/soc/realtek/rtd129x/rtk_ion_of.c rtk_ion_probe nr_heaps:5
- [ 4.144758] rtk_ion_probe: adding heap Audio of type 8 with 10200000@f800000 (type:GEN_POOL)
- [ 4.276783] rtk_ion_probe: adding heap Media of type 7 with 7e000000@2000000 (type:CMA_POOL)
- [ 4.287285] rtk_ion_probe: adding heap Media of type 7 with 20000000@5000000 (type:GEN_POOL)
- [ 4.297779] rtk_ion_probe: adding heap Media of type 7 with 2c00000@d400000 (type:GEN_POOL)
- [ 4.316748] NET: Registered protocol family 2
- [ 4.322161] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 4.330554] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 4.338443] TCP: Hash tables configured (established 16384 bind 16384)
- [ 4.345866] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 4.352720] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 4.360268] NET: Registered protocol family 1
- [ 4.368181] futex hash table entries: 1024 (order: 5, 131072 bytes)
- [ 4.376665] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 4.384689] NET: Registered protocol family 38
- [ 4.389746] io scheduler noop registered
- [ 4.394169] io scheduler deadline registered
- [ 4.399040] io scheduler cfq registered (default)
- [ 4.404937] [RTD129x PCIE Slot2] 9803b000.pcie2: PCIE host driver initial begin.
- [ 4.413288] [RTD129x PCIE Slot2] 9803b000.pcie2: Speed Mode: GEN2
- [ 4.420414] reset-rtk: DEASSERT 0x0801c004 [0x0f840e3d -> 0x0f8c0e3d] D 0x00080000, M 0x00080000
- [ 4.430621] reset-rtk: DEASSERT 0x0801c004 [0x0f8c0e3d -> 0x0f8e0e3d] D 0x00020000, M 0x00020000
- [ 4.440826] reset-rtk: DEASSERT 0x0801c004 [0x0f8e0e3d -> 0x0f9e0e3d] D 0x00100000, M 0x00100000
- [ 4.451032] reset-rtk: DEASSERT 0x0801c004 [0x0f9e0e3d -> 0x0fbe0e3d] D 0x00200000, M 0x00200000
- [ 4.461237] reset-rtk: DEASSERT 0x0801c004 [0x0fbe0e3d -> 0x0ffe0e3d] D 0x00400000, M 0x00400000
- [ 4.471439] reset-rtk: DEASSERT 0x0801c004 [0x0ffe0e3d -> 0x0fff0e3d] D 0x00010000, M 0x00010000
- [ 4.481642] reset-rtk: DEASSERT 0x08020050 [0x0000801f -> 0x0000c01f] D 0x00004000, M 0x00004000
- [ 4.728831] reset-rtk: ASSERT 0x0801c004 [0x0fff0e3d -> 0x0ff70e3d] D 0x00080000, M 0x00080000
- [ 4.739034] reset-rtk: ASSERT 0x0801c004 [0x0ff70e3d -> 0x0ff50e3d] D 0x00020000, M 0x00020000
- [ 4.749232] reset-rtk: ASSERT 0x0801c004 [0x0ff50e3d -> 0x0fe50e3d] D 0x00100000, M 0x00100000
- [ 4.759433] reset-rtk: ASSERT 0x0801c004 [0x0fe50e3d -> 0x0fc50e3d] D 0x00200000, M 0x00200000
- [ 4.769636] reset-rtk: ASSERT 0x0801c004 [0x0fc50e3d -> 0x0f850e3d] D 0x00400000, M 0x00400000
- [ 4.779838] reset-rtk: ASSERT 0x0801c004 [0x0f850e3d -> 0x0f840e3d] D 0x00010000, M 0x00010000
- [ 4.790038] reset-rtk: ASSERT 0x08020050 [0x0000c01f -> 0x0000801f] D 0x00004000, M 0x00004000
- [ 4.800249] [RTD129x PCIE Slot2] 9803b000.pcie2: PCIE device has link down in slot 2
- [ 4.808983] [RTD129x PCIE Slot2] 9803b000.pcie2: rtk_pcie2_hw_initial fail
- [ 4.816739] [RTD129x PCIE Slot2]: probe of 9803b000.pcie2 failed with error -22
- [ 4.928815] [RTD129x PCIE Slot1] 9804e000.pcie: PCIE host driver initial begin.
- [ 4.937123] rtk_pcie_probe: gpio -2 is not valid
- [ 4.942392] reset-rtk: ASSERT 0x0801c004 [0x0f840e3d -> 0x0f840e3d] D 0x00000000, M 0x00000040
- [ 4.952597] reset-rtk: ASSERT 0x0801c004 [0x0f840e3d -> 0x0f840e3d] D 0x00000000, M 0x00000100
- [ 4.962801] reset-rtk: ASSERT 0x0801c004 [0x0f840e3d -> 0x0f840e3d] D 0x00000000, M 0x00002000
- [ 4.973004] reset-rtk: ASSERT 0x0801c004 [0x0f840e3d -> 0x0f840e3d] D 0x00000000, M 0x00004000
- [ 4.983207] reset-rtk: ASSERT 0x0801c004 [0x0f840e3d -> 0x0f840e3d] D 0x00000000, M 0x00008000
- [ 4.993409] reset-rtk: ASSERT 0x0801c004 [0x0f840e3d -> 0x0f840e3d] D 0x00000000, M 0x00000080
- [ 5.003614] reset-rtk: ASSERT 0x08020050 [0x0000801f -> 0x0000801f] D 0x00000000, M 0x00002000
- [ 5.013840] reset-rtk: DEASSERT 0x0801c004 [0x0f840e3d -> 0x0f840e7d] D 0x00000040, M 0x00000040
- [ 5.024045] reset-rtk: DEASSERT 0x0801c004 [0x0f840e7d -> 0x0f840f7d] D 0x00000100, M 0x00000100
- [ 5.034246] reset-rtk: DEASSERT 0x0801c004 [0x0f840f7d -> 0x0f842f7d] D 0x00002000, M 0x00002000
- [ 5.044447] reset-rtk: DEASSERT 0x0801c004 [0x0f842f7d -> 0x0f846f7d] D 0x00004000, M 0x00004000
- [ 5.054647] reset-rtk: DEASSERT 0x0801c004 [0x0f846f7d -> 0x0f84ef7d] D 0x00008000, M 0x00008000
- [ 5.064849] reset-rtk: DEASSERT 0x0801c004 [0x0f84ef7d -> 0x0f84effd] D 0x00000080, M 0x00000080
- [ 5.075051] reset-rtk: DEASSERT 0x08020050 [0x0000801f -> 0x0000a01f] D 0x00002000, M 0x00002000
- [ 5.368844] reset-rtk: ASSERT 0x0801c004 [0x0f84effd -> 0x0f84efbd] D 0x00000040, M 0x00000040
- [ 5.379048] reset-rtk: ASSERT 0x0801c004 [0x0f84efbd -> 0x0f84eebd] D 0x00000100, M 0x00000100
- [ 5.389249] reset-rtk: ASSERT 0x0801c004 [0x0f84eebd -> 0x0f84cebd] D 0x00002000, M 0x00002000
- [ 5.399450] reset-rtk: ASSERT 0x0801c004 [0x0f84cebd -> 0x0f848ebd] D 0x00004000, M 0x00004000
- [ 5.409651] reset-rtk: ASSERT 0x0801c004 [0x0f848ebd -> 0x0f840ebd] D 0x00008000, M 0x00008000
- [ 5.419858] reset-rtk: ASSERT 0x0801c004 [0x0f840ebd -> 0x0f840e3d] D 0x00000080, M 0x00000080
- [ 5.430060] reset-rtk: ASSERT 0x08020050 [0x0000a01f -> 0x0000801f] D 0x00002000, M 0x00002000
- [ 5.440269] [RTD129x PCIE Slot1] 9804e000.pcie: PCIE device has link down in slot 1
- [ 5.448904] [RTD129x PCIE Slot1] 9804e000.pcie: rtk_pcie_hw_initial fail
- [ 5.456461] [RTD129x PCIE Slot1]: probe of 9804e000.pcie failed with error -22
- [ 5.464997] [drivers/video/fbdev/rtk/rtk_fb.c rtk_fb_probe]
- [ 5.464997]
- [ 5.474803] [drivers/video/fbdev/rtk/rtk_fb.c rtk_fb_update_by_memory] [1920 x 1080] addr:0xf02e000 size:0xfd2000 irq:0
- [ 5.474803]
- [ 5.489612] [drivers/video/fbdev/rtk/rtk_fb.c rtk_fb_update_by_memory] numberofbuffers 2
- [ 5.489612]
- [ 5.501380] I/DC: ALLOC DC INFO BUFFER!
- [ 5.505699] I/DC: rpc_common_base:ffffff800800c000 ipc:ffffff800800c0c4
- [ 5.513278] I/DC: [DC_Init 1808]
- [ 5.569324] Console: switching to colour frame buffer device 240x67
- [ 5.628743] corectrl: CPU List = [ 1-3 ]
- [ 5.633638] [SB2 DBG][sb2_dbg_init] Info 0x30000
- [ 5.638854] [SB2 DBG][sb2_dbg_init] initialized
- [ 5.644126] reset-rtk: DEASSERT 0x08022088 [0x00001f80 -> 0x00001f82] D 0x00000002, M 0x00000002
- [ 5.654859] input: venus_IR_input as /devices/virtual/input/input0
- [ 5.662180] rpc is not paused & suspended
- [ 5.668744] rpc_int_base:ffffff8008d68104 irq:25
- [ 5.673874] [PUWRAP] begin pu_init
- [ 5.677900] [PUWRAP] end pu_init result=0x0
- [ 5.682760] [PUWRAP] pu_probe
- [ 5.686138] [PUWRAP] success to probe pu wrapper device with USE_ION_ALLOCATOR
- [ 5.694657] res.start:0x98007000, bonding_value:0x0
- [ 5.7001
- [ROS: openRPC() intr_scpu_dev_r buf 0x00e2ffa1 s 0x00e2ffa1 e 0x00e4ffa1 i 0x00e2ffa1
- [ROS: openStubRPC() intr_w buf 0x00e6ffa1 s 0x00e6ffa1 e 0x00e8ffa1 i 0x00e6ffa1[AVCPU] Set Debug level flag 0x81de057c *flag 0x01dcb310 ucache 0xa1dcb310
- [AVCPU] Set Debug level *ptrDebugFlag 0x00000001
- -------------------
- Audio Version = 186434 (Kylin)
- Common Version = 0
- Binary src compiled at Mar 13 2018 11:34:04
- Note =
- -------------------
- [A] gloabl malloc size 0x003ffd48
- 81] [VPUDRV] : get clock controller s_vpu_clk_ve1=0xffffffc07adea080
- [ 5.745780] AudioIntrRead:143 can't find process for handling AudioIntrRead programID:98
- [ 5.745790] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81ddfd4d atomic
- [ 5.775627] [VPUDRV] : get clock controller s_vpu_clk_ve2=0xffffffc07adeff80
- [ 5.783768] reset-rtk: DEASSERT 0x0801a000 [0x9fda1355 -> 0x9fda3355] D 0x00002000, M 0x00002000
- [ 5.793975] reset-rtk: DEASSERT 0x0801a000 [0x9fda3355 -> 0x9fda7355] D 0x00004000, M 0x00004000
- [ 5.804399] VE3: ve3_probe
- [ 5.807461] VE3 : base address get from DTB physical base addr=0x98048000, virtual base=0xffffff8008d80000, size=0x4000(actually=0x424)
- [ 5.821372] VE3: get clock controller s_ve3_clk=0xffffffc07adef880
- [ 5.828335] ve3_pctrl_on
- [ 5.831204] reset-rtk: ASSERT 0x0801a000 [0x9fda7355 -> 0x9fda7355] D 0x00000000, M 0x00008000
- [ 5.841407] reset-rtk: DEASSERT 0x0801a000 [0x9fda7355 -> 0x9fdaf355] D 0x00008000, M 0x00008000
- [ 5.851626] reset-rtk: DEASSERT 0x0801a000 [0x9fdaf355 -> 0x9fdaf355] D 0x00000000, M 0x00008000
- [ 5.878809] Get cti: 0x13
- [ 5.881753] VE3: dec kernel module.
- [ 5.885775] VE3: Init single core at 0x 98048000 IRQ=20
- [ 5.892357] VE3: core[0] has HEVC
- [ 5.896085] VE3: core[0] has VP9
- [ 5.899726] VE3: core[0] has PP
- [ 5.903433] VE3: module inserted. Major = 0
- [ 5.908144] ve3_pctrl_off
- [ 5.911174] memalloc: Linear Memory Allocator
- [ 5.916365] jpu_probe
- [ 5.918954] [JPUDRV] : jpu base address get from DTB physical base addr=0x9803e000, virtual base=0xffffff8008d8e000, size=0x1000
- [ 5.932139] [JPUDRV] : get clock controller s_jpu_clk=0xffffffc07adef100
- [ 5.939709] reset-rtk: DEASSERT 0x0801c004 [0x0f840e3d -> 0x0f840e3f] D 0x00000002, M 0x00000002
- [ 5.949939] s_jpu_irq:17 want to register jpu_irq_handler
- [ 5.956053] [JPUDRV] success to probe jpu device with non reserved video memory
- [ 5.964300] reset-rtk: ASSERT 0x0801c004 [0x0f840e3f -> 0x0f840e3d] D 0x00000002, M 0x00000002
- [ 5.974579] jpu_init
- [ 5.977035] end jpu_init result=0x0
- [ 5.981087] rtd1295-hwnat driver loaded
- [ 5.985428] re865x_probe:13589: IRQ = 9
- [ 5.989840] re865x_probe:13612: HWNAT start 0x98060000, rtl_hwnat_mmio = 0xffffff8008e00000
- [ 5.999262] re865x_probe:13615: HW NAT offload_enable = enable
- [ 6.005832] re865x_probe:13619: rgmii_enable = enable
- [ 6.011528] re865x_probe:13623: RGMII voltage = 1 (1:1.8V, 2:2.5V, 3:3.3V)
- [ 6.019283] re865x_probe:13627: RGMII TX delay = 1 (0.5 ns per step)
- [ 6.026440] re865x_probe:13631: RGMII RX delay = 1 (0.5 ns per step)
- [ 6.033607] re865x_probe:13635: mac0_enable = enable
- [ 6.039208] re865x_probe:13644: mac0_mode = RGMII
- [ 6.044505] re865x_probe:13648: mac5_conn_to = PHY
- [ 6.049910] re865x_probe:13652: mac0_phy_id = 2
- [ 6.055010] re865x_probe:13656: mac4_phy_id = 4
- [ 6.060118] re865x_probe:13660: mac5_phy_id = 1
- [ 6.065219] re865x_probe:13664: LED mode = 1
- [ 6.070035] re865x_probe:13668: gpio_link_led_enable = 1
- [ 6.076065] rtl_set_vlanconfig_mac_addr:13428: MAC address base = 00:10:20:30:40:50
- [ 6.084831] reset-rtk: ASSERT 0x0801a000 [0x9fdaf355 -> 0x9fdaf355] D 0x00000000, M 0x00000002
- [ 6.095035] reset-rtk: DEASSERT 0x0801a000 [0x9fdaf355 -> 0x9fdaf357] D 0x00000002, M 0x00000002
- [ 6.105305] reset-rtk: DEASSERT 0x08022088 [0x00001f82 -> 0x00001f82] D 0x00000000, M 0x00000200
- [ 6.115508] reset-rtk: DEASSERT 0x08022088 [0x00001f82 -> 0x00001f82] D 0x00000000, M 0x00000400
- [ 6.126720] reset-rtk: DEASSERT 0x08022088 [0x00001f82 -> 0x00001f82] D 0x00000000, M 0x00000200
- [ 6.137928] reset-rtk: DEASSERT 0x0801a000 [0x9fdaf357 -> 0x9fdaf357] D 0x00000000, M 0x00000002
- [ 6.241433] NAT: fail to request GPIO pin 254
- [ 6.250870] eth0 added. vid=8 Member port 0x10...
- [ 6.256665] eth1 added. vid=9 Member port 0x20...
- [ 6.262481] eth2 added. vid=9 Member port 0x1...
- [ 6.268139] [peth0] added, mapping to [eth0]...
- [ 6.273509] misc rtk_lockapi: registered.
- [ 6.318819] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 6.327469] console [ttyS0] disabled
- [ 6.331546] 98007800.serial0: ttyS0 at MMIO 0x98007800 (irq = 194, base_baud = 1687500) is a 16550A
- [ 6.341778] console [ttyS0] enabled
- [ 6.341778] console [ttyS0] enabled
- [ 6.349293] bootconsole [uart0] disabled
- [ 6.349293] bootconsole [uart0] disabled
- [ 6.358131] [drm] Initialized drm 1.1.0 20060810
- [ 6.373599] brd: module loaded
- [ 6.377741] reset-rtk: ASSERT 0x0801a000 [0x9fdaf357 -> 0x9fdaf357] D 0x00000000, M 0x00000020
- [ 6.387032] reset-rtk: ASSERT 0x0801a000 [0x9fdaf357 -> 0x9fdaf357] D 0x00000000, M 0x00000080
- [ 6.498813] reset-rtk: DEASSERT 0x0801a000 [0x9fdaf357 -> 0x9fdaf377] D 0x00000020, M 0x00000020
- [ 6.508083] reset-rtk: DEASSERT 0x0801a000 [0x9fdaf377 -> 0x9fdaf3f7] D 0x00000080, M 0x00000080
- [ 6.517365] reset-rtk: ASSERT 0x08020050 [0x0000801f -> 0x0000801f] D 0x00000000, M 0x00000400
- [ 6.526641] reset-rtk: ASSERT 0x08020050 [0x0000801f -> 0x0000801f] D 0x00000000, M 0x00000200
- [ 6.638810] reset-rtk: DEASSERT 0x08020050 [0x0000801f -> 0x0000841f] D 0x00000400, M 0x00000400
- [ 6.648078] reset-rtk: DEASSERT 0x08020050 [0x0000841f -> 0x0000861f] D 0x00000200, M 0x00000200
- [ 6.677363] [SATA] spread-spectrum disable
- [ 6.711612] [SATA] SATA calibrate = 20
- [ 6.730466] reset-rtk: DEASSERT 0x0801a000 [0x9fdaf3f7 -> 0x9fdaf7f7] D 0x00000400, M 0x00000400
- [ 6.759745] [SATA] spread-spectrum disable
- [ 6.793986] [SATA] SATA calibrate = 20
- [ 6.812836] reset-rtk: DEASSERT 0x08020050 [0x0000861f -> 0x0000869f] D 0x00000080, M 0x00000080
- [ 6.822149] ahci_rtk 9803f000.sata: masking port_map 0x3 -> 0x3
- [ 6.828271] ahci_rtk 9803f000.sata: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl platform mode
- [ 6.837384] ahci_rtk 9803f000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc sadm sds apst
- [ 6.848989] scsi host0: ahci_rtk
- [ 6.852705] scsi host1: ahci_rtk
- [ 6.856249] ata1: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x100 irq 10
- [ 6.864378] ata2: SATA max UDMA/133 mmio [mem 0x9803f000-0x9803ffff] port 0x180 irq 10
- [ 6.872626] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 6.881486] rtk_rbus_init:90
- [ 6.884563] rtk_rbus_probe:27
- [ 6.887937] rtk_refclk_init:89
- [ 6.891233] rtk_refclk_probe:27
- [ 6.895086] rtk_se_probe: res.start=0x000000009800c000 res.end=0x000000009800cfff
- [ 6.902774] rtk_se_probe: mem[0] phys:0x000000009800c000 virt:0xffffff800921c000 size:0x1000 type:1 name:SE reg space
- [ 6.913744] rtk_se_probe: mem[1] phys:0x000000007e117000 virt:0xffffff800921e000 size:0x1000 type:1 name:SE driver data
- [ 6.924845] rtk_se_probe: mem[2] phys:0x000000007e118000 virt:0xffffff8009220000 size:0x8000 type:1 name:SE command queue
- [ 6.936102] rtk_se_probe: irq=22
- [ 6.939694] Engine[0] Ctrl:00000004 Base:7e118000 ReadPtr:7e118000 WritePtr:7e118000 Limit:7e11c000
- [ 6.948979] Engine[1] Ctrl:00000004 Base:7e11c000 ReadPtr:7e11c000 WritePtr:7e11c000 Limit:7e120000
- [ 6.958646] rtk_md_probe: res.start=0x000000009800b000 res.end=0x000000009800bfff
- [ 6.966328] rtk_md_probe: mem[0] phys:0x000000009800b000 virt:0xffffff800922c000 size:0x1000 type:1 name:MD reg space
- [ 6.977262] rtk_md_probe: mem[1] phys:0x000000007e137000 virt:0xffffff800922e000 size:0x1000 type:1 name:MD driver data
- [ 6.988359] rtk_md_probe: mem[2] phys:0x000000007e138000 virt:0xffffff8009230000 size:0x4000 type:1 name:MD command queue
- [ 6.999616] rtk_md_probe: irq=21
- [ 7.003185] Engine[0] Ctrl:0000000c Base:7e138000 ReadPtr:7e138000 WritePtr:7e138000 Limit:7e13c000
- [ 7.012675] rtk-usb-phy-rle0599 98013824.usb_phy_rle0599: Probe RTK USB 2.0 RLE0599 PHY
- [ 7.021197] rtk-usb2phy 98028280.dwc3_drd_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY
- [ 7.030905] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY
- [ 7.040890] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Probe RTK USB 2.0 PHY
- [ 7.051066] rtk-usb3phy 98013210.dwc3_drd_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Probe RTK USB 3.0 PHY
- [ 7.060766] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Probe RTK USB 3.0 PHY
- [ 7.071144] rtk-dwc3 98013200.rtk_dwc3_drd: Probe Realtek-SoC USB DWC3 Host Controller
- [ 7.079785] dwc3 98020000.dwc3_drd: rtk dwc3 fixed dwc3 globals register start address 0xffffff8009258100
- [ 7.089751] rtk-usb3phy 98013210.dwc3_drd_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Init RTK USB 3.0 PHY
- [ 7.104438] rtk-usb3phy 98013210.dwc3_drd_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Initialized RTK USB 3.0 PHY
- [ 7.218819] ata2: SATA link down (SStatus 0 SControl 300)
- [ 7.224382] ata1: SATA link down (SStatus 0 SControl 300)
- [ 7.314629] rtk-usb2phy 98028280.dwc3_drd_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Init RTK USB 2.0 PHY
- [ 7.324207] rtk-usb2phy 98028280.dwc3_drd_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Initialized RTK USB 2.0 PHY
- [ 7.634443] dwc3 98020000.dwc3_drd: dwc3_host_init
- [ 7.639659] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013200.rtk_dwc3_drd
- [ 7.650196] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_drd_gpio_power_on_off 1294 type c power on by gpio (id=102) OK
- [ 7.662765] rtk-dwc3 98013200.rtk_dwc3_drd: dwc3_rtk_probe ok! (take 590 ms)
- [ 7.670045] rtk-dwc3 98013c00.rtk_dwc3_u2host: Probe Realtek-SoC USB DWC3 Host Controller
- [ 7.678925] dwc3 98029000.dwc3_u2host: rtk dwc3 fixed dwc3 globals register start address 0xffffff8009278100
- [ 7.889146] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Init RTK USB 2.0 PHY
- [ 7.898989] rtk-usb2phy 98031280.dwc3_u2host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Initialized RTK USB 2.0 PHY
- [ 8.209484] dwc3 98029000.dwc3_u2host: dwc3_host_init
- [ 8.214941] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013c00.rtk_dwc3_u2host
- [ 8.225743] rtk-dwc3 98013c00.rtk_dwc3_u2host: dwc3_rtk_probe ok! (take 550 ms)
- [ 8.233303] rtk-dwc3 98013e00.rtk_dwc3_u3host: Probe Realtek-SoC USB DWC3 Host Controller
- [ 8.242175] dwc3 981f0000.dwc3_u3host: rtk dwc3 fixed dwc3 globals register start address 0xffffff8009288100
- [ 8.252397] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Init RTK USB 3.0 PHY
- [ 8.267351] rtk-usb3phy 98013e10.dwc3_u3host_usb3phy: drivers/usb/phy/phy-rtk-usb3.c Initialized RTK USB 3.0 PHY
- [ 8.477816] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Init RTK USB 2.0 PHY
- [ 8.487657] rtk-usb2phy 981f8280.dwc3_u3host_usb2phy: drivers/usb/phy/phy-rtk-usb2.c Initialized RTK USB 2.0 PHY
- [ 8.798143] dwc3 981f0000.dwc3_u3host: dwc3_host_init
- [ 8.803589] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013e00.rtk_dwc3_u3host
- [ 8.814412] rtk-dwc3 98013e00.rtk_dwc3_u3host: dwc3_rtk_probe ok! (take 580 ms)
- [ 8.822152] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 8.828862] ehci-pci: EHCI PCI platform driver
- [ 8.833481] ehci-rtk: EHCI realtek driver init
- [ 8.838130] rtk-ehci 98013000.ehci: Probe Realtek-SoC USB EHCI Host Controller
- [ 8.845565] rtk-usb-phy-rle0599 98013824.usb_phy_rle0599: Init RTK USB phy-rle0599
- [ 8.853375] rtk-usb-phy-rle0599 98013824.usb_phy_rle0599: drivers/usb/phy/phy-rtk-rle0599.c Initialized RTK USB PHY rle0599
- [ 8.864830] rtk-ehci 98013000.ehci: EHCI Host Controller
- [ 8.870308] rtk-ehci 98013000.ehci: new USB bus registered, assigned bus number 1
- [ 8.878205] rtk-ehci 98013000.ehci: irq 7, io mem 0x98013000
- [ 8.898816] rtk-ehci 98013000.ehci: USB 2.0 started, EHCI 1.00
- [ 8.905540] hub 1-0:1.0: USB hub found
- [ 8.909426] hub 1-0:1.0: 1 port detected
- [ 8.913877] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013000.ehci
- [ 8.923703] rtk-ehci 98013000.ehci: ehci_rtk_drv_probe OK (take 90 ms)
- [ 8.930598] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 8.937037] rtk-ohci 98013400.ohci: Probe Realtek-SoC USB OHCI Host Controller
- [ 8.944509] rtk-ohci 98013400.ohci: Rtk Dmp OHCI
- [ 8.949270] rtk-ohci 98013400.ohci: new USB bus registered, assigned bus number 2
- [ 8.956961] rtk-ohci 98013400.ohci: irq 7, io mem 0x98013400
- [ 9.023499] hub 2-0:1.0: USB hub found
- [ 9.027371] hub 2-0:1.0: 1 port detected
- [ 9.031811] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_usb_init_power_on for 98013400.ohci
- [ 9.041662] rtk-ohci 98013400.ohci: ohci_rtk_drv_probe OK (take 110 ms)
- [ 9.049090] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 9.054731] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
- [ 9.062961] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
- [ 9.071902] xhci-hcd xhci-hcd.2.auto: irq 7, io mem 0x98020000
- [ 9.078535] hub 3-0:1.0: USB hub found
- [ 9.082437] hub 3-0:1.0: 1 port detected
- [ 9.086756] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 9.092410] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
- [ 9.100329] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 9.109259] hub 4-0:1.0: USB hub found
- [ 9.113128] hub 4-0:1.0: 1 port detected
- [ 9.117523] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
- [ 9.123179] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
- [ 9.131386] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
- [ 9.140325] xhci-hcd xhci-hcd.5.auto: irq 7, io mem 0x98029000
- [ 9.146944] hub 5-0:1.0: USB hub found
- [ 9.150828] hub 5-0:1.0: 1 port detected
- [ 9.155141] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
- [ 9.160795] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
- [ 9.168703] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 9.177631] hub 6-0:1.0: USB hub found
- [ 9.181523] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 9.189106] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
- [ 9.194751] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 7
- [ 9.202939] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
- [ 9.211887] xhci-hcd xhci-hcd.8.auto: irq 7, io mem 0x981f0000
- [ 9.218524] hub 7-0:1.0: USB hub found
- [ 9.222408] hub 7-0:1.0: 1 port detected
- [ 9.226730] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
- [ 9.232383] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 8
- [ 9.240302] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 9.249242] hub 8-0:1.0: USB hub found
- [ 9.253117] hub 8-0:1.0: 1 port detected
- [ 9.257699] usbcore: registered new interface driver usb-storage
- [ 9.264298] mousedev: PS/2 mouse device common for all mice
- [ 9.270637] rtc_rtk 9801b600.rtc: rtk_rtc already enabled
- [ 9.276504] rtc_rtk 9801b600.rtc: rtc core: registered rtc as rtc0
- [ 9.282944] i2c /dev entries driver
- [ 9.287493] [HDMITx] Driver init
- [ 9.290821] [HDMITx] Mode = HDMI
- [ 9.294300] [HDMITx] hotplug gpio(107)
- [ 9.298306] [HDMITx] [setup_mute_gpio]
- [ 9.302172] [HDMITx] Undefined gpio-audio-mute, sikp setup_mute_gpio
- [ 9.308682] [HDMITx] [register_hdmitx_scdcrr]
- [ 9.313167] [HDMITx] Skip SCDC RR init
- [ 9.317228] [HDMITx] Found DP TX node, clock always on
- [ 9.322514] [HDMITx] Driver init done
- [ 9.335106] reset-rtk: DEASSERT 0x0801a000 [0x9fdaf7f7 -> 0x9ffaf7f7] D 0x00200000, M 0x00200000
- [ 9.344387] reset-rtk: DEASSERT 0x0801a000 [0x9ffaf7f7 -> 0x9ffaf7f7] D 0x00000000, M 0x00100000
- [ 9.353698] reset-rtk: DEASSERT 0x08022088 [0x00001f82 -> 0x00001f92] D 0x00000010, M 0x00000010
- [ 9.362978] reset-rtk: DEASSERT 0x0801a000 [0x9ffaf7f7 -> 0x9ffaf7f7] D 0x00000000, M 0x00080000
- [ 9.384446] reg = 0x330800
- [ 9.387756] cpufreq: freq_table: frequency-table,rev1:
- [ 9.393037] cpufreq: 0 .volidx = 0 .freq = 300000
- [ 9.398125] cpufreq: 1 .volidx = 0 .freq = 400000
- [ 9.403224] cpufreq: 2 .volidx = 0 .freq = 500000
- [ 9.408312] cpufreq: 3 .volidx = 2 .freq = 600000
- [ 9.413407] cpufreq: 4 .volidx = 3 .freq = 700000
- [ 9.418494] cpufreq: 5 .volidx = 4 .freq = 800000
- [ 9.423591] cpufreq: 6 .volidx = 5 .freq = 900000
- [ 9.428678] cpufreq: 7 .volidx = 6 .freq = 1000000
- [ 9.433775] cpufreq: 8 .volidx = 8 .freq = 1100000
- [ 9.438871] cpufreq: 9 .volidx = 10 .freq = 1200000
- [ 9.444046] cpufreq: 10 .volidx = 12 .freq = 1300000
- [ 9.449231] cpufreq: 11 .volidx = 13 .freq = 1400000
- [ 9.454408] cpufreq: volt_table: voltage-table:
- [ 9.459062] cpufreq: 0 .vdd_min = 800000 .vdd_max = 800000
- [ 9.464949] cpufreq: 1 .vdd_min = 812500 .vdd_max = 812500
- [ 9.468817] usb 5-1: new high-speed USB device number 2 using xhci-hcd
- [ 9.477526] cpufreq: 2 .vdd_min = 825000 .vdd_max = 825000
- [ 9.483422] cpufreq: 3 .vdd_min = 850000 .vdd_max = 850000
- [ 9.489320] cpufreq: 4 .vdd_min = 875000 .vdd_max = 875000
- [ 9.495205] cpufreq: 5 .vdd_min = 900000 .vdd_max = 900000
- [ 9.501102] cpufreq: 6 .vdd_min = 925000 .vdd_max = 925000
- [ 9.506989] cpufreq: 7 .vdd_min = 950000 .vdd_max = 950000
- [ 9.512883] cpufreq: 8 .vdd_min = 962500 .vdd_max = 962500
- [ 9.518770] cpufreq: 9 .vdd_min = 975000 .vdd_max = 975000
- [ 9.524665] cpufreq: 10 .vdd_min = 1012500 .vdd_max = 1012500
- [ 9.530649] cpufreq: 11 .vdd_min = 1025000 .vdd_max = 1025000
- [ 9.536625] cpufreq: 12 .vdd_min = 1062500 .vdd_max = 1062500
- [ 9.542618] cpufreq: 13 .vdd_min = 1100000 .vdd_max = 1100000
- [ 9.548595] cpufreq: volt_table: l2-voltage-table:
- [ 9.553513] cpufreq: 0 .vdd_min = 900000 .vdd_max = 900000
- [ 9.559407] cpufreq: 1 .vdd_min = 900000 .vdd_max = 900000
- [ 9.565294] cpufreq: 2 .vdd_min = 900000 .vdd_max = 900000
- [ 9.571190] cpufreq: 3 .vdd_min = 900000 .vdd_max = 900000
- [ 9.577076] cpufreq: 4 .vdd_min = 900000 .vdd_max = 900000
- [ 9.582972] cpufreq: 5 .vdd_min = 900000 .vdd_max = 900000
- [ 9.588867] cpufreq: 6 .vdd_min = 900000 .vdd_max = 900000
- [ 9.594754] cpufreq: 7 .vdd_min = 900000 .vdd_max = 900000
- [ 9.600651] cpufreq: 8 .vdd_min = 900000 .vdd_max = 900000
- [ 9.606538] cpufreq: 9 .vdd_min = 900000 .vdd_max = 900000
- [ 9.612456] cpufreq: 10 .vdd_min = 950000 .vdd_max = 950000
- [ 9.616900] hub 5-1:1.0: USB hub found
- [ 9.616953] hub 5-1:1.0: 4 ports detected
- [ 9.626386] cpufreq: 11 .vdd_min = 950000 .vdd_max = 950000
- [ 9.632372] cpufreq: 12 .vdd_min = 1000000 .vdd_max = 1000000
- [ 9.638348] cpufreq: 13 .vdd_min = 1000000 .vdd_max = 1000000
- [ 9.662364] EMMC : emmc of_node found
- [ 9.666156] [rtkemmc_probe] get speed-step : 2
- [ 9.670802] [rtkemmc_probe] get driving s0 : 0x1
- [ 9.675528] [rtkemmc_probe] get driving s0 : 0x77
- [ 9.680348] [rtkemmc_probe] get driving s0 : 0x77
- [ 9.685163] [rtkemmc_probe] get driving s0 : 0x77
- [ 9.689981] [rtkemmc_probe] get driving s0 : 0x33
- [ 9.694796] [rtkemmc_probe] get driving s2 : 0x1
- [ 9.699527] [rtkemmc_probe] get driving s2 : 0xbb
- [ 9.704340] [rtkemmc_probe] get driving s2 : 0xbb
- [ 9.709158] [rtkemmc_probe] get driving s2 : 0xbb
- [ 9.713973] [rtkemmc_probe] get driving s2 : 0x33
- [ 9.718792] [rtkemmc_probe] get tx tuning switch : 0
- [ 9.723874] [rtkemmc_probe] get rx tuning switch : 0
- [ 9.728994] rtkemmc_set_pin_mux: EMMC_PFUNC_NF1 = 0x33333333
- [ 9.734888] EMMC: set to 0x00000000, EMMC_CTYPE=00000000
- [ 9.740334] EMMC: set_wrapper_div to 0x00002100
- [ 9.744972] EMMC, set_ip_div = cur_div(0x00000080), ignored.
- [ 9.751063] EMMC: phase adjust - EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
- [ 9.764208] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
- [ 9.777205] rtkemmc_dump_registers :
- [ 9.780957] EMMC_muxpad0 = 0xaaaa5965
- [ 9.784794] EMMC_muxpad1 = 0x55552555
- [ 9.788630] EMMC_PFUNC_NF1 = 0x33333333
- [ 9.792647] EMMC_PFUNC_CR = 0x22223322
- [ 9.796661] EMMC_PDRIVE_NF1 = 0x33333333
- [ 9.800771] EMMC_PDRIVE_NF2 = 0x33333333
- [ 9.804874] EMMC_PDRIVE_NF3 = 0x33333333
- [ 9.808982] EMMC_CTYPE = 0x00000000
- [ 9.812641] EMMC_UHSREG = 0x00000001
- [ 9.816388] EMMC_DDR_REG = 0x00000000
- [ 9.820230] EMMC_CARD_THR_CTL = 0x02000001
- [ 9.824511] EMMC_CLKDIV = 0x00000080
- [ 9.828259] EMMC_CKGEN_CTL = 0x00002100
- [ 9.832277] EMMC_DQS_CTLR1 = 0x00000000
- [ 9.836291] EMMC_PAD_CTL = 0x00000000
- [ 9.840592] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
- [ 9.853591] EMMC, set_ip_div = cur_div(0x00000080), ignored.
- [ 9.879204] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
- [ 9.892204] EMMC, set_ip_div = cur_div(0x00000080), ignored.
- [ 9.908797] mmc0: EMMC driver initialized
- [ 9.913008] rtk-sdmmc: build at : #2 SMP Thu Apr 26 18:38:15 PDT 2018
- [ 9.913334] EMMC : ignore cmd:0x34 since we're still in emmc init stage
- [ 9.913340] EMMC : ignore cmd:0x34 since we're still in emmc init stage
- [ 9.913757] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
- [ 9.913758] EMMC, set_ip_div = cur_div(0x00000080), ignored.
- [ 9.916383] EMMC: set_freq to 0x46, EMMC_CKGEN_CTL=0x00002100, PLL_EMMC1=00000003, PLL_EMMC2=04517893, PLL_EMMC3=00464388, PLL_EMMC4=00000007
- ** 2823 printk messages dropped ** [ 9.962447] Unable to handle kernel NULL pointer dereference at virtual address 00000041
- ** 6229 printk messages dropped ** [ 9.973953] Unable to handle kernel NULL pointer dereference at virtual address 00000041
- ** 6321 printk messages dropped ** [ 9.985372] Unable to handle kernel NULL pointer dereference at virtual address 00000041
- ** 6335 printk messages dropped ** [ 9.996791] Unable to handle kernel NULL pointer dereference at virtual address 00000041
- ** 6336 printk messages dropped ** [ 10.008197] Unable to handle kernel NULL pointer dereference at virtual address 00000041
- ** 6331 printk messages dropped ** [ 10.019616] Unable to handle kernel NULL pointer dereference at virtual address 00000041
- ** 6336 printk messages dropped ** [ 10.031029] Unable to handle kernel NULL pointer dereference at virtual address 00000041
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement