[2019-07-20 19:36:16] [Output] : ★ there would be two cars that need to be fully wrapped in vinyl      ((Anna Pohl))
[2019-07-20 19:37:02] [Output] : ★ Anna Pohl begins by pressure washing both the vehicles, making sure to remove the bulk of the dirt
[2019-07-20 19:37:17] [Output] : ★ me then grabs a bucket of soapy water and a sponge and gives both vehicles a      ((Anna Pohl))
[2019-07-20 19:37:38] [Output] : ★ thorough clean, getting the sponge into the panel gaps and convex surfaces      ((Anna Pohl))
[2019-07-20 19:37:49] [Output] : ★ Anna Pohl would finish cleaning the vehicles by pressure washing them once more
[2019-07-20 19:40:11] [Output] : ★ Anna Pohl lets the vehicles dry and then grabs a tub of mineral spirits and gives the cars a
[2019-07-20 19:40:32] [Output] : ★ thorough once over with a clean cloth to ensure that the surfaces are free of      ((Anna Pohl))
[2019-07-20 19:40:41] [Output] : ★ anything that might show under the wrap      ((Anna Pohl))
[2019-07-20 19:41:11] [Output] : ★ Anna Pohl starts with the bmw, and lays the vinyl on the vehicle, measuring out the placement
[2019-07-20 19:41:16] [Output] : ★ of the sheets      ((Anna Pohl))
[2019-07-20 19:41:43] [Output] : ★ Anna Pohl trims the sheets and moves to the hood

[2019-07-20 19:42:04] [Output] : ★ Anna Pohl peels the adhesive backing from the sheet and places it loosely onto the hood, ensuring that
[2019-07-20 19:42:14] [Output] : ★ it lines up with the panel      ((Anna Pohl))
[2019-07-20 19:42:39] [Output] : ★ Anna Pohl then grabs her hot air gun and evenly heats the vinyl before raising one edge
[2019-07-20 19:42:58] [Output] : ★ and using a squeegee to lay the vinyl onto the panel starting from the center of the hood      ((Anna Pohl))
[2019-07-20 19:43:43] [Output] : ★ Anna Pohl ensures not to leave any air bubbles and finishes applying the vinyl to the hood
[2019-07-20 19:45:56] [Output] : ★ trimming the excess and folding it over the sides of the hood      ((Anna Pohl))
[2019-07-20 19:46:19] [Output] : ★ Anna Pohl would repeat the process on the doors, rear hatch and bumpers
[2019-07-20 19:46:43] [Output] : ★ Anna Pohl then moves to the roof and lays down "knifeless tape" down the middle of the roof

[2019-07-20 19:47:42] [Output] : ★ Anna Pohl measures out and trims the roof section sheets and starts with the passenger side

[2019-07-20 19:48:34] [Output] : ★ Anna Pohl removes the adhesive  backing from the rear end of the vinyl, sticking it to the roof

[2019-07-20 19:49:33] [Output] : ★ Anna Pohl would keep tension on the sheet as she's continue laying down the vinyl
[2019-07-20 19:49:44] [Output] : ★ moving towards the windshield      ((Anna Pohl))

[2019-07-20 19:50:28] [Output] : ★ Anna Pohl grabs her hot air gun and squeegee and starts working the vinyl onto the roof
[2019-07-20 19:50:48] [Output] : ★ moving from the front to the rear of the roof, removing all bubbles that would appear      ((Anna Pohl))
[2019-07-20 19:52:11] [Output] : ★ Anna Pohl would cut and work the vinyl around the roof rails, cutting the excess and folding over
[2019-07-20 19:52:20] [Output] : ★ the edges of the panel      ((Anna Pohl))
[2019-07-20 19:52:58] [Output] : ★ Anna Pohl finishes applying the passenger side and moves over to the driver's side
[2019-07-20 19:53:20] [Output] : ★ Anna Pohl measures and cuts out the roof section sheet and places it onto the roof
[2019-07-20 19:53:56] [Output] : ★ Anna Pohl removes the adhesive backing from the front corner and tacks it into place near the
[2019-07-20 19:54:17] [Output] : ★ windshield, overlapping the passenger side vinyl, with the knifeless tape still under both      ((Anna Pohl))
[2019-07-20 19:54:21] [Output] : ★ sheets      ((Anna Pohl))

[2019-07-20 20:04:00] [Output] : ★ Anna Pohl keeps tension on the sheet and starts removing the backing and sticking down the vinyl
[2019-07-20 20:04:20] [Output] : ★ Anna Pohl finishes removing the backing and goes over the panel with the heat gun and squeegee
[2019-07-20 20:04:49] [Output] : ★ Anna Pohl trims the excess and covers the edges of the panel, under the doors and trunk-lid
[2019-07-20 20:05:21] [Output] : ★ Anna Pohl heats the roof uniformly, to ensure the vinyl will stick, then carefully finds the
[2019-07-20 20:05:51] [Output] : ★ knifeless tape and starts peeling it up, cutting through both roof sheets      ((Anna Pohl))
[2019-07-20 20:06:34] [Output] : ★ the tape would leave a clean meet line between the sheets as Anna would run over      ((Anna Pohl))
[2019-07-20 20:06:41] [Output] : ★ the meet line with the squeegee      ((Anna Pohl))

[2019-07-20 20:07:58] [Output] : ★ Anna Pohl would then apply the vinyl on the rear quarters of the car in the same manner
[2019-07-20 20:08:14] [Output] : ★ Anna Pohl would finish wrapping the car by doing the front fenders

[2019-07-20 20:08:39] [Output] : ★ Anna Pohl would repeat the process on the second car, learning from  mistakes made on the first car