munkys7string

Kahuna / Thin SSHD 500GB Terminal

Apr 9th, 2016
1,067
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  
  2. Rst 0x40M
  3. Servo Processor Is Reset.
  4.  
  5. (P) SATA Reset
  6.  
  7.  
  8. Request spin / disc table recovery
  9. ASCII Diag m
  10. TCC:001E
  11. ode
  12.  
  13. F3 T>OQc
  14.  
  15. Invalid Diag Cmd Parameter
  16.  
  17. F3 T>/c
  18.  
  19. F3 C>Q
  20.  
  21. Online CR: Rev 0011.0000, Flash, Abort
  22. Online ESC: Rev 0011.0000, Flash, Abort Looping Command or Batch File
  23. Online ' ': Rev 0001.0000, Overlay, Pause Output
  24. Online '.': Rev 0013.0000, Overlay, Display Active Status
  25. Online '?': Rev 0011.0001, Overlay, Display Diagnostic Buffer Information
  26. Online '`': Rev 0013.0000, Overlay, Display Read/Write Statistics
  27. Online '$': Rev 0014.0000, Overlay, Display Read/Write Statistics By Zone
  28. Online '{': Rev 0011.0000, Overlay, Toggle EIB-Specific R/W Tracing
  29. Online ^D: Rev 0011.0001, Overlay, Toggle R/W Tracing
  30. Online ^N: Rev 0011.0001, Overlay, Toggle R/W Tracing
  31. Online ^W: Rev 0011.0000, Overlay, Enable and Init RW Statistics
  32. Online ^O: Rev 0003.0000, Overlay, Advance Servo Tracing State
  33. Online ':': Rev 0001.0000, Overlay, PrepSecondaryOnlineCmd
  34. Online '!': Rev 0011.0000, Overlay, Display Current Read Channel Settings
  35. Online '<': Rev 0011.0000, Overlay, Decrement Read/Write Scope Sync
  36. Online '>': Rev 0011.0000, Overlay, Increment Read/Write Scope Sync
  37. Online '~': Rev 0015.0000, Overlay, Display Native Interface Command State
  38. Online ^A: Rev 0018.0000, Flash, Display Firmware Revision
  39. Online ^B: Rev 0012.0000, Overlay, Get Thermistor Temperature
  40. Online ^C: Rev 0011.0000, Overlay, Firmware Reset
  41. Online ^E: Rev 0011.0000, Overlay, Display Native Interface Configuration
  42. Online ^F: Rev 0011.0001, Overlay, Display Native Interface Read Cache Information
  43. Online ^I: Rev 0011.0000, Overlay, Display Controller Registers
  44. Online ^K: Rev 0011.0000, Overlay, Display DST Status
  45. Online ^L: Rev 0021.0000, Overlay, Display Sign On Message
  46. Online ^P: Rev 0011.0000, Overlay, Toggle Diag Idle Mode
  47. Online ^Q: Rev 0011.0000, Overlay, Resume Interface Task
  48. Online ^R: Rev 0011.0000, Flash, Enable ASCII Online Serial Port Mode
  49. Online ^S: Rev 0011.0000, Overlay, Pause Interface Task
  50. Online ^T: Rev 0011.0000, Flash, Enable ESLIP Serial Port Mode
  51. Online ^U: Rev 0011.0000, Overlay, Display Congen
  52. Online ^V: Rev 0011.0000, Overlay, Toggle Interface Command Echo
  53. Online ^X: Rev 0012.0001, Overlay, Display Native Interface and Read/Write Command History
  54. Online ^Y: Rev 0011.0000, Overlay, Display DST Status
  55. Online ^Z: Rev 0011.0000, Flash, Enable ASCII Diagnostic Serial Port Mode
  56. Online ^\: Rev 0011.0000, Overlay, Toggle Debug Display Enable
  57. Level : '`': Rev 0004.0000, Overlay, QMON Counters
  58. Level : '$': Rev 0003.0000, Overlay, QMON Stats
  59. Level : '@': Rev 0001.0000, Overlay, DRAM Refresh Intervals
  60. Level : 'C'No help available
  61. Level : 'E'No help available
  62. Level : 'S'No help available
  63. All Levels CR: Rev 0011.0000, Flash, Abort
  64. All Levels '/': Rev 0001.0000, Flash, Change Diagnostic Command Level, /[Level]
  65. All Levels '+': Rev 0012.0000, Flash, Peek Memory Byte, +[AddrHi],[AddrLo],[NotUsed],[NumBytes]
  66. All Levels '-': Rev 0012.0000, Flash, Peek Memory Word, -[AddrHi],[AddrLo],[NotUsed],[NumBytes]
  67. All Levels '=': Rev 0011.0002, Flash, Poke Memory Byte, =[AddrHi],[AddrLo],[Data],[Opts]
  68. All Levels 'A': Rev 0011.0001, Overlay, Set Test Space, A[OptsOrParmSelect],[ParmValue],[AddrType],[HdForCylLimit]
  69. All Levels 'L': Rev 0001.0002, Overlay, Enable Looping, L[Opts],[CountOrStopOnErrCode]
  70. Level 1 'N': Rev 0016.0001, Flash, SMART Control, N[SubCmd],[SubCmdParm0],[SubCmdParm1]
  71. Level 1 'B': Rev 0011.0000, Overlay, Buffer Display, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
  72. Level 1 'D': Rev 0011.0001, Overlay, Memory Block Display, D[AddrHi],[AddrLo],[CompVal],[NumBytes],[Opts],[SizeInBytes]
  73. Level 1 'G': Rev 0011.0000, Overlay, Generic Read/Write Request, G[Parm0],[Parm1],[Parm2],...[Parm9]
  74. Level 1 'S': Rev 0011.0001, Overlay, Edit Processor Memory Byte, S[AddrHi],[AddrLo],[MemValue],[NumBytes],[Opts]
  75. Level 1 'U': Rev 0011.0001, Overlay, Edit Buffer Memory Byte, U[AddrHi],[AddrLo],[MemValue],[NumBytes]
  76. Level 1 'c': Rev 0011.0000, Overlay, Buffer Compare, c[SrcBlk],[RefBlk],[NumBlks],[ContOnErr]
  77. Level 1 'e': Rev 0011.0000, Overlay, Spin Down and Reset Drive, e[MsecDelay],[Opts]
  78. Level 1 'j': Rev 0001.0000, Overlay, Display Hardware Jumper Setting, j[HardwareJumperSelect]
  79. Level 1 'm': Rev 0011.0001, Overlay, Edit Processor Memory Word, m[AddrHi],[AddrLo],[MemValue],[NumBytes],[Opts]
  80. Level 1 's': Rev 0001.0000, Overlay, Call SDBP Cmd, s[Parm1],[Parm2],[Parm3]
  81. Level 2 'x': Rev 0016.0000, Flash, Display Zone Information, x[Partition],[Hd],[Zone],[Options]
  82. Level 2 'B': Rev 0011.0000, Overlay, Buffer Display, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
  83. Level 2 'C': Rev 0011.0000, Overlay, Buffer Copy, C[SrcBlk],[DestBlk],[NumBlks]
  84. Level 2 'D': Rev 0001.0003, Overlay, LdpcIterationControl, D[itratn cnt],[glbl itratn],[BERP opts],[erasure],[slidewindowjog_sz],[ext itratn]
  85. Level 2 'E': Rev 0015.0000, Overlay, Display / Edit Log, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
  86. Level 2 'F': Rev 0011.0016, Overlay, Modify Track Defect List, F[PSctr/LBA],[Action]
  87. Level 2 'H': Rev 0011.0000, Overlay, Select Logical Head, H[Hd],[SkType],[Options]
  88. Level 2 'I': Rev 0016.0000, Overlay, Display / Modify Adaptive Parameter, I,[GroupId]
  89. Level 2 'K': Rev 0011.0000, Overlay, Set Tracking Offset, K[OffsetValue],[PersOrTempOpt],[UnitsOpt],[ChanReload]
  90. Level 2 'M': Rev 0012.0000, Overlay, Set Diag Idle Mode, M[ModeSelect],[ModeMask],[ResetToPowerOn]
  91. Level 2 'N': Rev 0001.0000, Overlay, Set Direct Write Mode, N[EnableDirWrtModeOpt]
  92. Level 2 'O': Rev 0011.0000, Overlay, Seek Repeatedly Between Physical Cylinders, O[StartPhyCyl0],[StartPhyCyl1],[NumSkPairs],[NumSeconds],[Hd]
  93. Level 2 'P': Rev 0011.0000, Overlay, Set Buffer Pattern, P[PatternSelOrPatternLow],[PatternHi],[PatternBits],[Opts],[BlkNum],[NumBlks]
  94. Level 2 'Q': Rev 0011.0001, Overlay, Write, Read, Read CHS, Q[Sec],[NumSecs],,[PhyOpt],[Opts]
  95. Level 2 'R': Rev 0011.0003, Overlay, Read CHS, R[Sec],[NumSecs],,[PhyOpt],[Opts]
  96. Level 2 'S': Rev 0011.0000, Overlay, Seek to Logical Cylinder and Head, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  97. Level 2 'T': Rev 0015.0000, Overlay, Measure Throughput, T[Opts],[CylSkew],[HeadSkew],[MiniZoneSkew],[SkewStep],[LengthInTracks],[OffsetInTracks],[NumberOfRetries]
  98. Level 2 'U': Rev 0011.0000, Overlay, Spin Up Drive, U[HoldState],[Hd],[Cyl]
  99. Level 2 'V': Rev 0011.0001, Overlay, Read Verify CHS, V[Sec],[NumSecs],[CompareBlk],[Opts]
  100. Level 2 'W': Rev 0011.0002, Overlay, Write CHS, W[Sec],[NumSecs],,[PhyOpt],[Opts]
  101. Level 2 'X': Rev 0015.0001, Overlay, Display Track Information, X[LogCyl],[Hd],[SysAreaOpt],[Opts],[RowsPerPage]
  102. Level 2 'Y': Rev 0012.0000, Overlay, Set Retries - DERP, Y[Mode],[MaxRdRetries],[MaxWrtRetries],[OtcTLevel],[Options]
  103. Level 2 'Z': Rev 0011.0000, Overlay, Spin Down Drive, Z
  104. Level 2 'a': Rev 0002.0000, Overlay, Measure Optimum Skew, a
  105. Level 2 'b': Rev 0002.0000, Overlay, BER by Hd / Zone, b[hd][,zone]
  106. Level 2 'c': Rev 0011.0000, Overlay, Buffer Compare, c[SrcBlk],[RefBlk],[NumBlks],[ContOnErr]
  107. Level 2 'h': Rev 0015.0000, Overlay, Translate Physical Sector, h[Sec],[NumSecs]
  108. Level 2 'i': Rev 0011.0000, Overlay, Display Defects On Current Track, i[Print Summary]
  109. Level 2 'j': Rev 0011.0001, Overlay, Read Wedge, j[WedgeAddr],[NumWedges],[NumSkipedWedges],[TranSize],[Opts],[RegAddr0],...,[RegAddr13]
  110. Level 2 'k': Rev 0001.0000, Overlay, Set User Cylinder/Head/MiniZone Skew, k[CylSkew],[HeadSkew],[MiniZoneSkew]
  111. Level 2 'l': Rev 0015.0000, Overlay, Translate Logical Sector, l[Sec],[NumSecs]
  112. Level 2 'o': Rev 0002.0001, Overlay, Corrupt LBA, o[Lba],[NumBlocks],[BurstSpan],[BurstOffset],[NumberOfRandomCorrupt],[Flags]
  113. Level 2 'r': Rev 0011.0001, Overlay, Read Long CHS or Read System CHS, r[LongSec],[LongSecsOrSysSec],[SysSecs],[LongPhySecOpt],[LongOpts],[SysOpts]
  114. Level 2 's': Rev 0011.0000, Overlay, Seek to Physical Cylinder and Head, s[Cyl],[Hd],[ValidKey],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  115. Level 2 't': Rev 0015.0000, Overlay, Translate Wedge, t[Wdg],[NumWdgs]
  116. Level 2 'u': Rev 0011.0000, Overlay, Enable/Disable Channel/Preamp Register Display, u[EnableDisableOpt]
  117. Level 2 'v': Rev 0011.0000, Overlay, Convert Data Track Percentage To Servo Offset Count, v[Percentage]
  118. Level 2 'w': Rev 0012.0001, Overlay, Write Long CHS or Write System CHS, w[LongSec],[LongSecsOrSysSec],[SysSecs],[LongPhySecOpt],,[SysOpts]
  119. Level 2 'y': Rev 0011.0000, Overlay, Set DERP Retry State, y[Type],[PathState],[RetryStateCnt],[LoopCnt1],[LoopCnt2]
  120. Level 2 'z': Rev 0011.0002, Overlay, Write Wedge, z[WedgeAddr],[NumWedges],[NumSkipedWedges],[TranSize],[Opt],[RegAddr0],...,[RegAddr13],[TSpacing]
  121. Level 2 '7': Rev 0011.0001, Overlay, Write Verify CHS, 7[Sec],[NumSecs],[WrBufBlk],[Opts]
  122. Level 3 'D': Rev 0011.0000, Overlay, Measure Seek Access Time, D[SkLength],[SkType],[NumSks]
  123. Level 3 'E': Rev 0015.0000, Overlay, Display / Edit Log, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
  124. Level 3 'H': Rev 0011.0000, Overlay, Select Logical Head, H[Hd],[SkType],[Options]
  125. Level 3 'O': Rev 0011.0000, Overlay, Seek Repeatedly Between Physical Cylinders, O[StartPhyCyl0],[StartPhyCyl1],[NumSkPairs],[NumSeconds],[Hd]
  126. Level 3 'Q': Rev 0011.0001, Overlay, Write, Read, Write, Read CHS, Q[Sec],[NumSecs],[Opts]
  127. Level 3 'R': Rev 0011.0000, Overlay, Read Current Servo Destination, R
  128. Level 3 'S': Rev 0011.0000, Overlay, Seek to Logical Cylinder and Head, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  129. Level 3 'U': Rev 0011.0000, Overlay, Spin Up Drive, U[HoldState],[Hd],[Cyl]
  130. Level 3 'V': Rev 0012.0000, Overlay, Read or Write Power ASIC Register, V[RegAddr],[RegValue],[WrOpt]
  131. Level 3 'Z': Rev 0011.0000, Overlay, Spin Down Drive, Z
  132. Level 3 'b': Rev 0001.0000, Overlay, LoadUnloadHeads, b[Cmd],[Velocity],[Dwell],[Lock]
  133. Level 3 'f': Rev 0013.0000, Overlay, Real Time Servo Trace, f[SubCmd],[SubPrm0],[SubPrm1],[SubPrm2]
  134. Level 3 'p': Rev 0015.0000, Overlay, Translate Physical Sector, p[Sec],[NumSecs]
  135. Level 3 'q': Rev 0015.0000, Overlay, Translate Logical Sector, q[Sec],[NumSecs]
  136. Level 3 's': Rev 0011.0000, Overlay, Seek to Physical Cylinder and Head, s[Cyl],[Hd],[ValidKey],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  137. Level 4 'B': Rev 0011.0000, Overlay, Enable / Disable RVFF, B[NewRvffControlMode]
  138. Level 4 'D': Rev 0011.0000, Overlay, Measure Seek Access Time, D[SkLength],[SkType],[NumSks]
  139. Level 4 'E': Rev 0015.0000, Overlay, Display / Edit Log, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
  140. Level 4 'F': Rev 0001.0000, Overlay, Fast IO Cmd, F[NumRevs],[Attrib1],[Attrib2],[Attrib3]
  141. Level 4 'H': Rev 0011.0000, Overlay, Select Logical Head, H[Hd],[SkType],[Options]
  142. Level 4 'K': Rev 0011.0000, Overlay, Set Tracking Offset, K[OffsetValue],[PersOrTempOpt],[UnitsOpt],[ChanReload]
  143. Level 4 'O': Rev 0011.0000, Overlay, Display Micro Jog for Logical Cylinder and Head, O[LogCyl],[Hd],[Opts],[SysAreaOpt]
  144. Level 4 'S': Rev 0011.0000, Overlay, Seek to Logical Cylinder and Head, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  145. Level 4 'U': Rev 0011.0000, Overlay, Servo Batch Test sub commands, U[SubCmd],[SubCmdParm0],[SubCmdParm1],[SubCmdParm2]
  146. Level 4 'c': Rev 0001.0000, Overlay, Find Min Or Max Cylinders c[Head],[Mode],[RangeMultiplier],[RetryCountLimit],[FilterTimeConstant]
  147. Level 4 'd': Rev 0001.0000, Overlay, Display Servo Disc Slip
  148. Level 4 'e': Rev 0011.0000, Overlay, Enable / Disable PES Output, e[PesLeftShiftCnt],[DisablePesOut]
  149. Level 4 'g': Rev 0001.0000, Overlay, Display Servo Sector Error Log, g
  150. Level 4 'k': Rev 0001.0000, Overlay, Get VGA Data, k[OpType],[StartHt],[EndHt],[HtInc]
  151. Level 4 'l': Rev 0011.0000, Overlay, Scan Track for Servo Defects and ZAP, l[RdPositionOpt]
  152. Level 4 'q': Rev 0001.0000, Overlay, Display Servo Event Log, q
  153. Level 4 's': Rev 0001.0000, Overlay, Display Servo Sector Error Count, s
  154. Level 4 't': Rev 0011.0000, Overlay, Display / Modify ZAP Table, t[EntryNum],[EntryValue]
  155. Level 4 'u': Rev 0011.0000, Overlay, Set Seek Speed, u[Opts],[SkSpeed]
  156. Level 4 'v': Rev 0011.0000, Overlay, Butterfly Seek Test, v[StartPhyCyl0],[StartPhyCyl1],[NumSkPairs],[NumSeconds],[Hd]
  157. Level 5 'E': Rev 0001.0000, Flash, Measure Disc Eccentricity
  158. Level 5 'R': Rev 0011.0000, Flash, Read Servo RAM at Address, R[Addr],[NumBytes]
  159. Level 5 'S': Rev 0011.0000, Flash, Enter Servo Matlab Shell, S
  160. Level 5 'B': Rev 0011.0000, Overlay, Servo Bode Plot, B[BodeType],[InjAmp],[Fmin],[Fmax],[NumFreq],[NumSamples],[EnableTracing]
  161. Level 5 'C': Rev 0011.0000, Overlay, Generic Servo Command, C[CmdNum],[Parm1],...[Parm7]
  162. Level 5 'D': Rev 0011.0000, Overlay, Read / Unlock DDR Buffer, B[OperateCode]
  163. Level 5 'F': Rev 0011.0001, Overlay, DriveFreeFallProtection, F[OpCode],[FreeFallSen],[TumbleSen],[SimDur],[SimSensorOutputs]
  164. Level 5 'G': Rev 0011.0000, Overlay, Select Servo Controller, G[Head],[Controller],[InputShift]
  165. Level 5 'K': Rev 0001.0000, Overlay, Servo Disc Slip, K [OperationSelectId]
  166. Level 5 'U': Rev 0011.0000, Overlay, Enable / Disable Servo Updates, U[VcmDacUpdateOpt],[AToDUdateOpt]
  167. Level 5 'W': Rev 0011.0000, Overlay, Write Servo RAM at Address, W[Addr],[NumBytes],[Data]
  168. Level 5 'Z': Rev 0011.0000, Overlay, Read Zap from Disc to Table, Z
  169. Level 5 'd': Rev 0011.0000, Overlay, Disable / Enable Servo ZAP coefficients and ZAP read, d[ZapControlMode]
  170. Level 5 'e': Rev 0001.0000, Overlay, Enable / Disable Shock Sensor, e[Operation]
  171. Level 5 'i': Rev 0011.0000, Overlay, Read Servo Symbol Table at Index, i[Index]
  172. Level 5 'p': Rev 0001.0000, Overlay, Set Power Mode, p[PowerMode]
  173. Level 5 'r': Rev 0011.0000, Overlay, Read Servo RAM at Index, r[Index],[NumBytes],[ByteOffset]
  174. Level 5 'w': Rev 0011.0000, Overlay, Write Servo RAM at Index, w[Index],[NumBytes],[Data],[ByteOffset]
  175. Level 7 'x': Rev 0016.0000, Flash, Display Zone Information, x[Partition],[Hd],[Zone],[Options]
  176. Level 7 'B': Rev 0011.0000, Overlay, Buffer Display, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
  177. Level 7 'C': Rev 0011.0000, Overlay, Buffer Copy, C[SrcBlk],[DestBlk],[NumBlks]
  178. Level 7 'D': Rev 0012.0000, Overlay, Display Temperature, D,[DevSelect]
  179. Level 7 'E': Rev 0015.0000, Overlay, Display / Edit Log, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
  180. Level 7 'H': Rev 0011.0000, Overlay, Select Logical Head, H[Hd],[SkType],[Options]
  181. Level 7 'I': Rev 0016.0000, Overlay, Display / Modify Adaptive Parameter, I,[GroupId]
  182. Level 7 'K': Rev 0011.0000, Overlay, Set Track Format, K[UserAreaTrkFormatType],[SysAreaTrkFormatType]
  183. Level 7 'P': Rev 0011.0000, Overlay, Set Buffer Pattern, P[PatternSelOrPatternLow],[PatternHi],[PatternBits],[Opts],[BlkNum],[NumBlks]
  184. Level 7 'Q': Rev 0011.0001, Overlay, Write, Read, Read CHS, Q[Sec],[NumSecs],,[PhyOpt],[Opts]
  185. Level 7 'R': Rev 0011.0003, Overlay, Read CHS, R[Sec],[NumSecs],,[PhyOpt],[Opts]
  186. Level 7 'S': Rev 0011.0000, Overlay, Seek to Logical Cylinder and Head, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  187. Level 7 'U': Rev 0015.0005, Overlay, Preamp Temperature Adjust, U[TweakTemperature],[Partition],[Hd],[Zone],[Opts],[WrPreht],[WrWrtHt],[WrRdHt],[RdPreht],[RdWrtHt],[RdRdHt],[RelHum]
  188. Level 7 'W': Rev 0011.0002, Overlay, Write CHS, W[Sec],[NumSecs],,[PhyOpt],[Opts]
  189. Level 7 'X': Rev 0011.0000, Overlay, Display Preamp Head Resistance
  190. Level 7 'Y': Rev 0012.0000, Overlay, Set Retries - DERP, Y[Mode],[MaxRdRetries],[MaxWrtRetries],[OtcTLevel],[Options]
  191. Level 7 'Z': Rev 0011.0000, Overlay, Spin Down Drive, Z
  192. Level 7 'b': Rev 0012.0000, Overlay, Erase Track, b[AdjacentTrkCnt],[EraseCntPerTrk],[AcEraseOpt]
  193. Level 7 'c': Rev 0011.0000, Overlay, Off Track Capability, c[Sec],[NumSecs],[SecIncrement],[Offset]
  194. Level 7 'd': Rev 0002.0000, Overlay, Create Recoverable Read Error, d LBA,[min],[max],[cnt],[sev]
  195. Level 7 'e': Rev 0001.0000, Overlay, BipsControl, e[BipsControlOptions]
  196. Level 7 'g': Rev 0001.0000, Overlay, Sector Based BER, g[sctr],[len],[option]
  197. Level 7 'h': Rev 0011.0001, Overlay, Mark Media Flaw, h[PhyCyl],[Hd],[PhySec],[UndisturbedRadius],[EraseBandTrks],[PtrLen],[WgSpec],[Od/Id]
  198. Level 7 'i': Rev 0011.0000, Overlay, Generic Read/Write Request, i[Parm0],[Parm1],[Parm2],...[Parm9]
  199. Level 7 'm': Rev 0025.0000, Overlay, Display DOS Information, m[Flags],[LBA],[MinCnt]
  200. Level 7 'p': Rev 0002.0000, Overlay, Execute Pressure Sensor Command, p[SubCmd]
  201. Level 7 'r': Rev 0011.0000, Overlay, Read Non-Volatile Adaptive Parameters, r[Opts]
  202. Level 7 's': Rev 0011.0000, Overlay, Write Peripheral Register - channel or preamp, s[OpType],[RegAddr],[RegValue],[RegMask],[RegPagAddr]
  203. Level 7 't': Rev 0012.0000, Overlay, Read Peripheral Register - channel or preamp, t[OpType],[RegAddr],[NumRegs],[RegMask],[RegPagAddr]
  204. Level 7 'u': Rev 0011.0000, Overlay, Enable/Disable Write Fault, u[Op]
  205. Level 7 'w': Rev 0011.0000, Overlay, Save Adaptives To Flash, w[Seg],,22
  206. Level 7 'y': Rev 0011.0000, Overlay, Set DERP Retry State, y[Type],[PathState],[RetryStateCnt],[LoopCnt1],[LoopCnt2]
  207. Level 8 'C': Rev 0011.0000, Overlay, Servo Diag Sub Cmds, C[SubCmd],[Parm0],[Parm1],[Parm2]
  208. Level 8 'R': Rev 0011.0000, Overlay, Read Current Servo Destination, R
  209. Level 8 'S': Rev 0011.0000, Overlay, Seek to Logical Cylinder and Head, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  210. Level 8 'U': Rev 0011.0000, Overlay, Spin Up Drive, U[HoldState],[Hd],[Cyl]
  211. Level 8 'Z': Rev 0011.0000, Overlay, Spin Down Drive, Z
  212. Level 8 'd': Rev 0001.0000, Overlay, Head Smash Test, d[HeadDirection],[AccelerationDuration],[DecelerationDuration],[AccelerationCurrent],[DecelerationCurrent]
  213. Level A 'C': Rev 0015.0000, Overlay, Translate PBA, C[PbaHi],[PbaLow],[NumPbas]
  214. Level A 'D': Rev 0015.0000, Overlay, Translate Symbols From Index, D[PhyCyl],[Hd],[Sfi],[NumSfis]
  215. Level A 'E': Rev 0015.0000, Overlay, Display / Edit Log, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
  216. Level A 'F': Rev 0015.0001, Overlay, Translate LBA, F[LbaHi],[LbaLo],[SysAreaOpt],[NumLbas]
  217. Level A 'G': Rev 0015.0000, Overlay, Translate Host LBA, T[LbaHi],[LbaLo],[NumLbas]
  218. Level A 'M': Rev 0011.0000, Overlay, Set Controller Test Port, M[Port],[Value]
  219. Level A 'P': Rev 0013.0001, Overlay, Merge Alt List into Slip List, P[RADIAL_PAD_IN_TRACKS],[CIRCUMFERENTIAL_PAD_SINGLE_IN_WEDGES],[CIRCUMFERENTIAL_PAD_MULTI_IN_WEDGES],[OPTIONS]
  220. Level A 'Q': Rev 0011.0001, Overlay, Write, Read, Read LBA, Q[Lba],[NumLbas],[Opts]
  221. Level A 'R': Rev 0011.0003, Overlay, Read LBA, R[Lba],[NumLbas],,[Opts]
  222. Level A 'S': Rev 0011.0000, Overlay, Seek to LBA, S[LbaHi],[LbaLo],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  223. Level A 'T': Rev 0001.0000, Overlay, GetLbaTracks, T[Zone],[Head]
  224. Level A 'W': Rev 0011.0002, Overlay, Write LBA, W[Lba],[NumLbas],,[Opts]
  225. Level A 'Y': Rev 0012.0000, Overlay, Set Retries - DERP, Y[Mode],[MaxRdRetries],[MaxWrtRetries],[OtcTLevel],[Options]
  226. Level A 'c': Rev 0015.0000, Overlay, Translate Logical Cylinder, Logical Head and Logical Sector, c[Cyl],[Hd],[Sec],[SysAreaOpt],[NumSecs]
  227. Level A 'd': Rev 0015.0000, Overlay, Translate Physical Cylinder, Logical Head and Physical Sector, d[Cyl],[Hd],[Sec],[NumSecs]
  228. Level A 'e': Rev 0015.0000, Overlay, Translate Nominal Cylinder and Logical Head, e[Cyl],[Hd],[Sec],[SysAreaOpt]
  229. Level A 'f': Rev 0015.0000, Overlay, Translate Physical Cylinder, Logical Head and Physical Wedge, f[Cyl],[Hd],[Wdg],[NumWdgs]
  230. Level A 'l': Rev 0015.0001, Overlay, Display Track Information, l[LogCyl],[Hd],[SysAreaOpt],[Opts],[RowsPerPage]
  231. Level A 'y': Rev 0011.0000, Overlay, Set DERP Retry State, y[Type],[PathState],[RetryStateCnt],[LoopCnt1],[LoopCnt2]
  232. Level C 'B': Rev 0001.0001, Overlay, Display Channel Status List Data
  233. Level C 'C': Rev 0001.0000, Overlay, Display Select Channel Register, C[ChannelRegAsciiString]
  234. Level C 'D': Rev 0003.0000, Overlay, Display Bonanza Memory, D[MemorySelect],[StartAddress],[NumberOfSymbols],[BufferSelect]
  235. Level C 'E': Rev 0001.0000, Overlay, Display Bonanza Memory Size, E
  236. Level C 'G': Rev 0001.0000, Overlay, Set Channel Status List Triggers,[mask]
  237. Level C 'H': Rev 0001.0000, Overlay, Set Channel Status List Thresholds,[action],[value]
  238. Level C 'Q': Rev 0001.0000, Overlay, Display ASCII Command Information, Q[CmdLevel],[Cmd]
  239. Level C 'S': Rev 0000.0000, Overlay, Display Channel Status List Status
  240. Level C 'T': Rev 0012.0000, Overlay, Goop Plot, T[Hd],[StartTrk],[EndTrk],[ECCLvl],[NoFrcSync],[SkipCnt]
  241. Level E 'B': Rev 0011.0002, Overlay, Write Wedge, B[WedgeAddr],[NumWedges],[NumSkipedWedges],[TranSize],[Opt],[RegAddr0],...,[RegAddr13],[TSpacing]
  242. Level E 'C': Rev 0011.0001, Overlay, Read Wedge, C[WedgeAddr],[NumWedges],[NumSkipedWedges],[TranSize],[Opts],[RegAddr0],...,[RegAddr13]
  243. Level E 'G': Rev 0001.0000, Overlay, HeadDegradation, G[OperationControlOptions],[MeasurementControlOptions]
  244. Level E 'm': Rev 0011.0000, Overlay, Fast MSESER Measurement, m[]
  245. Level E 'n': Rev 0001.0000, Overlay, Dibit Extraction, n[sctr],[cnt],[dibit],[dibit],[dibit],[skip],[trim],[dsply]
  246. Level E 'o': Rev 0011.0000, Overlay, Fine RW Offset Measurement, o[NumAvgs],[TrkStepSize],[NumGuardTrks]
  247. Level E 'w': Rev 0011.0002, Overlay, Slow Write CHS, w[Sec],[NumSecs],[ConSec],[Skip],[UnitOfSkip]
  248. Level F 'b': Rev 0011.0000, Flash, Set Baud Rate, b[BaudRate],[MsecDelay]
  249. Level F 'B': Rev 0011.0000, Overlay, Buffer Display, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
  250. Level F 'C': Rev 0011.0000, Overlay, Buffer Copy, C[SrcBlk],[DestBlk],[NumBlks]
  251. Level F 'D': Rev 0011.0001, Overlay, Memory Block Display, D[AddrHi],[AddrLo],[CompVal],[NumBytes],[Opts],[SizeInBytes]
  252. Level F 'P': Rev 0011.0000, Overlay, Set Buffer Pattern, P[PatternSelOrPatternLow],[PatternHi],[PatternBits],[Opts],[BlkNum],[NumBlks]
  253. Level F 'U': Rev 0011.0000, Overlay, Spin Up Drive, U[HoldState],[Hd],[Cyl]
  254. Level F 'V': Rev 0011.0000, Overlay, Buffer Compare, V[SrcBlk],[RefBlk],[NumBlks],[ContOnErr]
  255. Level F 'Y': Rev 0012.0000, Overlay, Set Retries - DERP, Y[Mode],[MaxRdRetries],[MaxWrtRetries],[OtcTLevel],[Options]
  256. Level F 'Z': Rev 0011.0000, Overlay, Spin Down Drive, Z
  257. Level F 'r': Rev 0011.0001, Overlay, Read System CHS, r[LogSec],[NumSecs],[Opts]
  258. Level F 's': Rev 0011.0000, Overlay, Seek to Physical Cylinder and Head, s[Cyl],[Hd],[ValidKey],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  259. Level F 't': Rev 0011.0000, Overlay, Write Peripheral Register - channel or preamp, t[OpType],[RegAddr],[RegValue],[RegMask],[RegPagAddr]
  260. Level F 'y': Rev 0011.0000, Overlay, Set DERP Retry State, y[Type],[PathState],[RetryStateCnt],[LoopCnt1],[LoopCnt2]
  261. Level F 'z': Rev 0011.0000, Overlay, SataDebug, z[SubCmd],[Parm1],[Parm2],[Parm3]
  262. Level G 'B': Rev 0011.0000, Overlay, Fill Correction Buffer, B[StartAddr],[EndAddr],[Pattern],[Opts]
  263. Level G 'C': Rev 0011.0000, Overlay, Copy Correction Buffer, C[SrcAddr],[DestAddr],[NumSyms]
  264. Level G 'D': Rev 0011.0000, Overlay, Display Correction Buffer, D[StartAddr],[EndAddr],[CompareData]
  265. Level G 'F': Rev 0011.0000, Overlay, Fill Super Parity RAM, F[StartAddr],[EndAddr],[Pattern]
  266. Level G 'G': Rev 0011.0000, Overlay, Display Super Parity RAM, G[StartAddr],[EndAddr]
  267. Level H 'B': Rev 0011.0000, Overlay, Buffer Display, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
  268. Level H 'I': Rev 0001.0000, Overlay, Serial Identify, I[Strt],[Cnt]
  269. Level H 'P': Rev 0011.0000, Overlay, Set Buffer Pattern, P[PatternSelOrPatternLow],[PatternHi],[PatternBits],[Opts],[BlkNum],[NumBlks]
  270. Level H 'S': Rev 0011.0000, Overlay, Seek to Logical Cylinder and Head, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
  271. Level H 'b': Rev 0013.0001, Overlay, Contact Detect, b[Flags],[Revs],[BaselineRevs],[StartWedge],[A],[B],[C],[D],[E],[StartHt],[HtInc],
  272.  
  273. [FixedPESThresh],[FilterDelta],[RangeStart],[RangePts],[AdjThreshSigmaLimit],[VarContactThreshBackup],[InactiveHt]
  274. Level L 'C': Rev 0011.0000, Overlay, Copy Log File, C[SrcLog],[DestLog],[AppendOpt]
  275. Level L 'D': Rev 0013.0000, Overlay, Display Log File, D[Log],[ErrCode]
  276. Level L 'E': Rev 0011.0001, Overlay, Enable / Disable Logging, E[ErrLoggingOpt],[AsciiLoggingOpt],[RwStatsLoggingOpt]
  277. Level L 'I': Rev 0011.0000, Overlay, Display Log FileInfo, I[Log]
  278. Level L 'c': Rev 0011.0000, Overlay, Create Log File, c[Log],[LogType],[BufferOrDiskOpt],[NumBytes]
  279. Level L 'd': Rev 0011.0000, Overlay, Delete Log File, d[Log]
  280. Level L 'i': Rev 0011.0000, Overlay, Initialize Log File, i[Log]
  281. Level M 's': Rev 0001.0000, Overlay, Serial Port Test Results, s[Sub-command],[SptIndex],[ValidKey]
  282. Level N 'B': Rev 0001.0000, Overlay, NvcManageBadClumps, B[SubCommand]
  283. Level N 'C': Rev 0001.0000, Overlay, NvcCopyClumps, C[SubCommand],[SrcClump],[SrcClumpOffset],[DestClump],[DestClumpOffset],[LBA],[SecLength]
  284. 0 - User data copy
  285. 1 - System data copy
  286. Level N 'd': Rev 0002.0001, Overlay, NvcDumpFlashMetadata, d[SubCommand],[Clump],[BlockOffset],[Count] 0=Linear Order,[ForceComboMode]
  287. Level N 'E': Rev 0002.0000, Overlay, NvcEraseFlash, E[SubCommand],[StartClump],[ClumpCount],[ForceErase] Note, E[SubCommand],DEADBEEF == Erase all
  288. Level N 'G': Rev 0001.0000, Overlay, NvcReadWriteLong, G[SubCommand],[LBA],[#BitsToFlip],[StartAddr]
  289. Level N 'h': Rev 0001.0000, Overlay, NvcPrintPsmCmdHistory, h
  290. Level N 'I': Rev 0001.0000, Overlay, NvcInitializeFlashIODriver, I[InitializationComponent]
  291. Level N 'm': Rev 0001.0000, Overlay, NvcDisplayMemory, m[MemoryArea],[Offset],[Options]
  292. 0-Unused
  293. 1-Reserved
  294. 2-FlashDataManager
  295. 3-word
  296. 4-sector by byte offset
  297. 5-sector by sector offset
  298. 6-Capilano word
  299. 7-Capilano 128 words
  300. Level N 'M': Rev 0001.0000, Overlay, NvcModifyMemory, M[MemoryArea],[Offset],[Value],[Options]
  301. Level N 'r': Rev 0001.0000, Overlay, NvcReadFlashData, r[SubCommand],[Clump],[BlockOffset],[BlockCount],[TargetAddress],[LBA]
  302. 0-TargetAddress is iRAM sector
  303. 1-TargetAddress is any VBM
  304. Level N 'V': Rev 0001.0000, Overlay, NvcFlashVerificationTest, V[SubCommand],[StartClump],[ClumpCount],[StartBlock],[BlockCount],[Pattern],[PatternOptions],[TotalLoopCount],[ReadLoopCount]
  305. Level N 'v': Rev 0001.0000, Overlay, Display NVC Hardware Info, v
  306. Level N 'W': Rev 0001.0000, Overlay, NvcWriteFlashData, W[SubCommand],[Clump],[BlockOffset],[BlockCount],[TargetAddress],[LBA]
  307. 0-TargetAddress is iRAM sector
  308. 1-TargetAddress is any VBM
  309. Level O 'a': Rev 0001.0000, Overlay, CfsReturnActiveClump, a[ClumpDataType]
  310. Level O 'b': Rev 0002.0000, Overlay, CfsConciseReliDisplayCmd, b0
  311. Level O 'c': Rev 0004.0000, Overlay, CfsReturnClumpNode, c[SubCommand],[ClumpIndex]
  312. Level O 'C': Rev 0002.0000, Overlay, CfsDisplayClumpList, C[ClumpList]
  313. Level O 'G': Rev 0001.0000, Overlay, ReadWriteLong, G[SubCommand],[DataType],[StartLba],[EndLba]
  314. Level O 'I': Rev 0001.0000, Overlay, CfsInitializeCacheFileSystem, I
  315. Level O 'j': Rev 0001.0000, Overlay, CfsPrintAsdJournal, j0
  316. Level O 'K': Rev 0001.0000, Overlay, CopyClumpsCmd, K[source]
  317. Level O 'l': Rev 0001.0000, Overlay, CfsLoadCacheFileSystem, l
  318. Level O 'n': Rev 0002.0000, Overlay, CfsReturnCacheNode, n[NodeIndex]
  319. Level O 'p': Rev 0001.0000, Overlay, CfsDisplayClumpForIndex, p[NodeIndex]
  320. Level O 'r': Rev 0001.0000, Overlay, CfsReadNodeLba, r[StartLBA],[Count] Currently this command is not functional
  321. Level O 's': Rev 0001.0000, Overlay, CfsDisplaySentinelList, s[SentinelIndex],[StartLBA],[EndLBA]
  322. Level O 'S': Rev 0001.0000, Overlay, CfsSaveCacheFileSystem, S
  323. Level O 'v': Rev 0001.0003, Overlay, CfsVerifyIntegrity, v[TestSelection]
  324. Level T 'B': Rev 0011.0000, Flash, Set Baud Rate, B[BaudRate],[MsecDelay]
  325. Level T 'S': Rev 0001.0000, Flash, Reset drive customer settings, SHIP,[ParmValue]
  326. Level T 'V': Rev 0027.0000, Flash, Display Defect Lists, V[ListMask],[Hd],[StartCyl],[NumCyls],[Summary],[FlagsMask]
  327. Level T 'E': Rev 0015.0000, Overlay, Display / Edit Log, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
  328. Level T 'F': Rev 0011.0000, Overlay, Display / Modify Congen, F[ValueRef],[Data],[ResetEnable]
  329. Level T 'J': Rev 0011.0001, Overlay, Display / Modify CAP, J[ParmValue],[ParmId],[ParmArrayBytes],[ParmByteArrayOffset]
  330. Level T 'O': Rev 0001.0000, Overlay, Select Data Output Mode, O[Mode],[VerboseOpts]
  331. Level T 'P': Rev 0011.0000, Overlay, Download Generic File, P[FileBytes]
  332. Level T 'R': Rev 0011.0000, Overlay, Read Non-Volatile Adaptive Parameters, R[Opts]
  333. Level T 'W': Rev 0011.0000, Overlay, Save Adaptives To Flash, W[Seg],,22
  334. Level T 'i': Rev 0011.0003, Overlay, Initialize Defect List, i[DefectListSelect],[SaveListOpt],[ValidKey]
  335. Level T 'm': Rev 0015.0067, Overlay, Format Partition, m[Partition],[FormatOpts],[DefectListOpts],[MaxWrRetryCnt],[MaxRdRetryCnt],[MaxEccTLevel],[MaxCertifyTrkRewrites],[ValidKey],[DataPattern]
  336. Level T 'r': Rev 0001.0000, Overlay, Read File, r[FileId],[VolumeNum],[CopyNum],[ByteOffset],[Length],[OutputFmt]
  337. Level T 'q': Rev 0001.0000, Overlay, List Physical Head Table, q
  338. Level T 'w': Rev 0001.0000, Overlay, Write File, w[FileId],[VolumeNum],[CopyNum],[ByteOffset]
  339. Level T 'y': Rev 0001.0000, Overlay, List SIM files, y[Volume], [FileDescriptor]
  340. Level T '[': Rev 0011.0000, Overlay, ASCII Log Control, [[LogFunction],[Log]
  341. F3 C>/f
  342.  
  343. F3 F>b
  344.  
  345. F3 F>b115200
  346. ˜Ğÿˆz(CĞÿ
  347.  
  348. F3 F>
  349.  
  350. F3 F>OQT
  351.  
  352. Invalid Diag Cmd
  353.  
  354. F3 F>/T
  355.  
  356.  
  357. F3 T>V2
  358. System Slip Defect List
  359. log log log phys phys
  360. LBA span cumm cyl hd sctr zn cyl sctr SFI
  361. 0 0 0 0 0 0 0 22EB7 0 FFFFFFFF 0
  362. 62B42 1B4BE 1B4BE 0 1 0 1 22037 0 FFFFFFFF 7E000
  363.  
  364. Head 0: entries 1 slips 0
  365. Head 1: entries 1 slips 1B4BE
  366. Total Entries 2 Total Slips 1B4BE
  367.  
  368. F3 T>V3
  369.  
  370. WARNING!!! LBA remapping is enabled. User LBAs below are Physical LBAs.
  371. User Slip Defect List
  372. log log log phys phys
  373. Head 0: entries 1E2 slips 9594
  374. Head 1: entries 11A5 slips 2BD42
  375. Total Entries 1387 Total Slips 352D6
  376.  
  377. Rst 0x40M
  378. Servo Processor Is Reset.
  379.  
  380. (P) SATA Reset
  381.  
  382.  
  383. Request spin / disc table recovery
  384. ASCII Diag m
  385. TCC:001C
  386. ode
  387.  
  388. F3 T>V4
  389. Reassigned Sectors List Enabled
  390. Entries: 0000, Alts: 0000, Removed: 0028,
  391. Pending: 0000 Host Pending: 0000
  392.  
  393. Idx LBA PBA LLLCHS of LBA Wdg PLPCHS of PBA SFI Hours Msecs Status BBM Mask
  394.  
  395. F3 T>V10
  396. P List
  397.  
  398. Head 0 Entries: 1F4
  399. Head 1 Entries: 1447
  400. Total Entries: 163B
  401.  
  402. F3 T>V40
  403.  
  404. RECOV Servo Op=0055 Resp=0005Nonresident GList 0 entries returned
  405. Total entries available: 0
  406. PBA Len Flags Phy Cyl Hd PhySctr SFI
  407.  
  408. F3 T>V100
  409. Primary DST List 0x000064 entries returned
  410. Total entries available: 138C
  411.  
  412.  
  413. F3 T>OQ
  414.  
  415. Invalid Diag Cmd Parameter
  416.  
  417. F3 T>
  418. S T R = 0 0 1/
  419.  
  420. F3 T>/N
  421.  
  422. F3 N>s
  423.  
  424. Invalid Diag Cmd
  425.  
  426. F3 N>B
  427. NvcManageBadClumps, B[SubCommand]
  428. Invalid Diag Cmd Parameter
  429.  
  430. F3 N>h
  431.  
  432.  
  433.  
  434.  
  435. ---SOC PSM Command History---
  436.  
  437. Cmd#/PsmCmd Clump Offset Length LbaMid LbaLow LbaBits39To32 Options Status DestClump DestOffset
  438.  
  439. 0002 069E 0040 0000 8000 177E 0000 1000 0080 5D19 FF9B
  440.  
  441.  
  442.  
  443. 0502 069E 0040 0000 8000 177E 0000 1000 0080 5D19 FF9B
  444.  
  445.  
  446.  
  447. 0402 044F 0040 0000 8000 177E 0000 1000 0080 5D19 FF9B
  448.  
  449.  
  450.  
  451. 0302 000A 0040 0000 8000 177E 0000 9000 0080 5D19 FF9B
  452.  
  453.  
  454.  
  455. 0202 01A5 0040 0000 8000 177E 0000 9000 0080 5D19 FF9B
  456.  
  457.  
  458. F3 N>m
  459. NvcDisplayMemory, m[MemoryArea],[Offset],[Options]
  460. 0-Unused
  461. 1-Reserved
  462. 2-FlashDataManager
  463. 3-word
  464. 4-sector by byte offset
  465. 5-sector by sector offset
  466. 6-Capilano word
  467. 7-Capilano 128 words
  468. F3 N>
  469. Input_Command_Error
  470.  
  471. F3 N>N
  472.  
  473. Invalid Diag Cmd
  474.  
  475. F3 N>n
  476.  
  477. Invalid Diag Cmd
  478.  
  479. F3 N>r
  480. NvcReadFlashData, r[SubCommand],[Clump],[BlockOffset],[BlockCount],[TargetAddress],[LBA]
  481. 0-TargetAddress is iRAM sector
  482. 1-TargetAddress is any VBM
  483. F3 N>V
  484. NvcFlashVerificationTest, V[SubCommand],[StartClump],[ClumpCount],[StartBlock],[BlockCount],[Pattern],[PatternOptions],[TotalLoopCount],[ReadLoopCount]
  485. F3 N>v
  486.  
  487.  
  488. BridgePSMDriverID = 0x0006
  489.  
  490. FlashID ECA7 947E 64C4
  491.  
  492. Flash Manufacturer: Samsung
  493. Flash Capacity = 00008 GB MLC
  494. Combo Mode
  495.  
  496.  
  497. NumberOfClumps = 0x0800
  498.  
  499. LBAsPerCluster = 0x0010
  500.  
  501. LBAsPerClumpMLC = 0x2000
  502.  
  503. LBAsPerClumpSLC = 0x1000
  504.  
  505. ClustersPerClumpMLC = 0x0200
  506.  
  507. ClustersPerClumpSLC = 0x0100
  508.  
  509. DefragClumpThresholdInSectors = 0x1000
  510.  
  511. UserSLCMaxSizeInClumps = 0x0300
  512.  
  513. NumberOfPotentiallyWrittenClusters = 0x0004
  514.  
  515. DefectListRevisionKey 0x0002
  516.  
  517. SLC Clumps 0x0342
  518. F3 N>/O
  519.  
  520. F3 O>v
  521. CfsVerifyIntegrity, v[TestSelection]
  522. F3 O>v1
  523.  
  524. 1a: Displaying all nodes...
  525. 570A : FREE
  526. A2F5 : CACHE
  527. 0000 : UNKNOWN
  528. 0000 : UNKNOWN
  529. 0000 : UNKNOWN
  530. 0000 : UNKNOWN
  531. Node Count: Counted: F9FF
  532. 1b: Displaying all clumps...
  533. Clumps Nodes Valid LBAs
  534. 046F 0075D2 00697447 0-READ_CACHE_CLUMP_SENTINEL
  535. 0001 000000 00000000 1-READ_BOOT_CACHE_CLUMP_SENTINEL
  536. 0000 000000 00000000 2-READ_HOST_0_CLUMP_SENTINEL
  537. 0000 000000 00000000 3-READ_HOST_1_CLUMP_SENTINEL
  538. 0000 000000 00000000 4-READ_HOST_2_CLUMP_SENTINEL
  539. 0000 000000 00000000 5-READ_HOST_3_CLUMP_SENTINEL
  540. 0000 000000 00000000 6-READ_HOST_4_CLUMP_SENTINEL
  541. 0000 000000 00000000 7-READ_HOST_5_CLUMP_SENTINEL
  542. 0001 000000 00000000 8-DIRTY_WRITE_CACHE_CLUMP_SENTINEL
  543. 0002 00001B 000001D8 9-DIRTY_BOOT_CACHE_CLUMP_SENTINEL
  544. 0000 000000 00000000 A-DIRTY_WRITE_HOST_0_CLUMP_SENTINEL
  545. 0000 000000 00000000 B-DIRTY_WRITE_HOST_1_CLUMP_SENTINEL
  546. 0000 000000 00000000 C-DIRTY_WRITE_HOST_2_CLUMP_SENTINEL
  547. 0000 000000 00000000 D-DIRTY_WRITE_HOST_3_CLUMP_SENTINEL
  548. 0000 000000 00000000 E-DIRTY_WRITE_HOST_4_CLUMP_SENTINEL
  549. 0000 000000 00000000 F-DIRTY_WRITE_HOST_5_CLUMP_SENTINEL
  550. 013E 002CD6 000FD01E 10-CLEAN_WRITE_CACHE_CLUMP_SENTINEL
  551. 0002 000021 00000628 11-CLEAN_BOOT_CACHE_CLUMP_SENTINEL
  552. 0000 000000 00000000 12-CLEAN_WRITE_HOST_0_CLUMP_SENTINEL
  553. 0000 000000 00000000 13-CLEAN_WRITE_HOST_1_CLUMP_SENTINEL
  554. 0000 000000 00000000 14-CLEAN_WRITE_HOST_2_CLUMP_SENTINEL
  555. 0000 000000 00000000 15-CLEAN_WRITE_HOST_3_CLUMP_SENTINEL
  556. 0000 000000 00000000 16-CLEAN_WRITE_HOST_4_CLUMP_SENTINEL
  557. 0000 000000 00000000 17-CLEAN_WRITE_HOST_5_CLUMP_SENTINEL
  558. 0005 000011 0000213F 18-SIM_CACHE_CLUMP_SENTINEL
  559. 0004 000000 00000000 19-TABLE_CLUMP_SENTINEL
  560. 0047 000000 00000000 1A-ERASED_MLC_CLUMP_SENTINEL
  561. 01E4 000000 00000000 1B-ERASED_SLC_CLUMP_SENTINEL
  562. 0000 000000 00000000 1C-CONDEMNED_MLC_CLUMP_SENTINEL
  563. 0000 000000 00000000 1D-CONDEMNED_SLC_CLUMP_SENTINEL
  564. 0000 000000 00000000 1E-CLEAN_QUARANTINE_CLUMP_SENTINEL
  565. 0000 000000 00000000 1F-DIRTY_QUARANTINE_CLUMP_SENTINEL
  566. 0008 000000 00000000 20-ANCHOR_CLUMP_SENTINEL
  567. 0008 000000 00000000 21-BAD_CLUMP_SENTINEL
  568. 0004 000000 00000000 22-TABLE_RESERVE_CLUMP_SENTINEL
  569. 0000 000000 00000000 23-RETIRED_CLUMP_SENTINEL
  570. 0004 000000 00000000 24-FAILURE_RESERVE_CLUMP_SENTINEL
  571. Clump Count: Counted: 7FF
  572. Pass
  573. F3 O>C
  574.  
  575. READ_HOST_0_CLUMP_SENTINEL
  576.  
  577. Clump Prev->Curr->Next 1stNode ValidLBAs EraseCnt WkRd/UECC SLCMode EraseFailCnt ProgramFailCnt
  578. 1002: 1002->1002->1002 Invalid 0000 00000000 00/00 0002 0000 0000
  579.  
  580. F3 N>r1
  581. Diag NVC Read
  582.  
  583.  
  584. F3 N>r2
  585. Diag NVC Read
  586.  
  587.  
  588. F3 N>r0
  589. Diag NVC Read
  590.  
  591.  
  592. F3 N>V
  593. NvcFlashVerificationTest, V[SubCommand],[StartClump],[ClumpCount],[StartBlock],[BlockCount],[Pattern],[PatternOptions],[TotalLoopCount],[ReadLoopCount]
  594. F3 N>V1
  595.  
  596.  
  597. Clump 0
  598.  
  599. SOC PSM Command = 0002 Flash Erase
  600.  
  601. SOC PSM Status = 0011 Invalid PSM Parm
  602.  
  603.  
  604.  
  605. ---SOC PSM Command History---
  606.  
  607. Cmd#/PsmCmd Clump Offset Length LbaMid LbaLow LbaBits39To32 Options Status DestClump DestOffset
  608.  
  609. 0002 0000 0001 0000 0000 0001 0000 8000 0011 5D19 FF9B
  610.  
  611.  
  612.  
  613. 0F02 0000 0001 0000 0000 0001 0000 8000 0011 5D19 FF9B
  614.  
  615.  
  616.  
  617. 0E00 0000 0000 0001 0000 0000 0000 C000 0080 5D19 FF9B
  618.  
  619.  
  620.  
  621. 0D00 0000 0000 0001 0000 0000 0000 C000 0080 5D19 FF9B
  622.  
  623.  
  624.  
  625. 0C00 0000 0000 0001 0000 0000 0000 8000 0080 5D19 FF9B
  626.  
  627.  
  628.  
  629. Clump 1
  630. Rst 0x40M
  631. Servo Processor Is Reset.
  632.  
  633. (P) SATA Reset
  634.  
  635.  
  636. Request spin / disc table recovery
  637. ASCII Diag m
  638. TCC:0020
  639. ode
  640.  
  641. F3 T>/N
  642.  
  643. F3 N>B
  644. NvcManageBadClumps, B[SubCommand]
  645. Invalid Diag Cmd Parameter
  646.  
  647. F3 N>B0
  648.  
  649. F3 N>B1
  650.  
  651. F3 N>B2
  652.  
  653. F3 N>BB
  654.  
  655. F3 N>B*0
  656.  
  657. F3 N>B
  658. NvcManageBadClumps, B[SubCommand]
  659. Invalid Diag Cmd Parameter
  660.  
  661. F3 N>Bp
  662.  
  663. F3 N>Bl
  664.  
  665. F3 N>C1
  666.  
  667.  
  668. SOC PSM Command = 0008 Flash Copy
  669.  
  670. SOC PSM Status = 0011 Invalid PSM Parm
  671.  
  672.  
  673.  
  674. ---SOC PSM Command History---
  675.  
  676.  
  677.  
  678.  
  679. F3 N>m2
  680. FDM Regs
  681. 0000: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  682. 0020: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  683. 0040: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  684. 0060: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  685. 0080: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  686. 00A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  687. 00C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  688. 00E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  689. 0100: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  690. 0120: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  691. 0140: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  692. 0160: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  693. 0180: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  694. 01A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  695. 01C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  696. 01E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  697. 0200: 0000 0000 0000 0000 4F38 003F 01BA 0000 0002 0002 0000 0000 0000 0000 0000 0000
  698. 0220: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  699. 0240: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  700. 0260: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  701. 0280: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  702. 02A0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  703. 02C0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  704. 02E0: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  705. 0300: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  706. 0320: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  707. 0340: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  708. 0360: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
  709. F3 N>m1
  710.  
  711. DiagError 0000000A
  712. F3 N>v
  713.  
  714.  
  715. BridgePSMDriverID = 0x0006
  716.  
  717. FlashID ECA7 947E 64C4
  718.  
  719. Flash Manufacturer: Samsung
  720. Flash Capacity = 00008 GB MLC
  721. Combo Mode
  722.  
  723.  
  724. NumberOfClumps = 0x0800
  725.  
  726. LBAsPerCluster = 0x0010
  727.  
  728. LBAsPerClumpMLC = 0x2000
  729.  
  730. LBAsPerClumpSLC = 0x1000
  731.  
  732. ClustersPerClumpMLC = 0x0200
  733.  
  734. ClustersPerClumpSLC = 0x0100
  735.  
  736. DefragClumpThresholdInSectors = 0x1000
  737.  
  738. UserSLCMaxSizeInClumps = 0x0300
  739.  
  740. NumberOfPotentiallyWrittenClusters = 0x0004
  741.  
  742. DefectListRevisionKey 0x0002
  743.  
  744. SLC Clumps 0x0342
  745. F3 N>Ref voltage 0000 Thermistor voltage 1E80 Thermistor temp in degrees C 0020, 32d
  746.  
  747.  
  748. F3 N>
  749. Prod Desc: Kahuna Tabu, 60zn, LBARO, ASD WPin+FFB+PFB+Combo+PSpin, 8/16/32GB
  750. Package Version: KH6T60.SDM1.DW15AN.SM16
  751. Serial #: W3701VZY
  752. Changelist: 00642433
  753. Model #: ST500LM000-1EJ162
  754. ID: 100
  755.  
  756. Current R/W User LBA 000000000000 LLL CHS 000000.0.0000 PLP CHS 000000.0.0000
  757. R/W Status 1 R/W Error 00000080 Ready - PCC c79 UT 5757.562764 PowerSig 807F ReadyStatusFlags 0002A1E0
  758.  
  759. Blks 003C36-003C36 (000001), BufAddr 00786C00-00786DFF, DBA 40786C00, BytesPerBlk 200 Cmd Input Buf
  760. Blks 003C37-003C37 (000001), BufAddr 00786E00-00786FFF, DBA 40786E00, BytesPerBlk 200
  761. Blks 003C38-003C38 (000001), BufAddr 00787000-007871FF, DBA 40787000, BytesPerBlk 200
  762. Blks 003C39-003C39 (000001), BufAddr 00787200-007873FF, DBA 40787200, BytesPerBlk 200
  763. Blks 003C3A-003C3A (000001), BufAddr 00787400-007875FF, DBA 40787400, BytesPerBlk 200
  764. Blks 003C3B-003C3B (000001), BufAddr 00787600-007877FF, DBA 40787600, BytesPerBlk 200
  765. Blks 003C3C-003C3C (000001), BufAddr 00787800-007879FF, DBA 40787800, BytesPerBlk 200
  766. Blks 003C3D-003C50 (000014), BufAddr 00787A00-0078A1FF, DBA 40787A00, BytesPerBlk 200 Online Cmd SDBP DFB
  767. Blks 003C51-003C64 (000014), BufAddr 0078A200-0078C9FF, DBA 4078A200, BytesPerBlk 200 Test Service SDBP DSB
  768. Blks 003C65-003C78 (000014), BufAddr 0078CA00-0078F1FF, DBA 4078CA00, BytesPerBlk 200
  769. Blks 003C79-003C8C (000014), BufAddr 0078F200-007919FF, DBA 4078F200, BytesPerBlk 200
  770. Blks 003C8D-003CD4 (000048), BufAddr 00791A00-0079A9FF, DBA 40791A00, BytesPerBlk 200 Diag Mode Cmd SDBP DFB
  771. Blks 003CD5-003D1C (000048), BufAddr 0079AA00-007A39FF, DBA 4079AA00, BytesPerBlk 200
  772. Blks 003D1D-003D64 (000048), BufAddr 007A3A00-007AC9FF, DBA 407A3A00, BytesPerBlk 200
  773. Blks 003D65-003DAC (000048), BufAddr 007ACA00-007B59FF, DBA 407ACA00, BytesPerBlk 200
  774. Blks 003DAD-003DF4 (000048), BufAddr 007B5A00-007BE9FF, DBA 407B5A00, BytesPerBlk 200
  775. Blks 003DF5-003E9A (0000A6), BufAddr 007BEA00-007D35FF, DBA 407BEA00, BytesPerBlk 200
  776. Blks 003E9B-003F40 (0000A6), BufAddr 007D3600-007E81FF, DBA 407D3600, BytesPerBlk 200
  777. Blks 00E772-00E934 (0001C3), BufAddr 01CEE400-01EB84BF, DBA 41CEE400, BytesPerBlk 1040 Default Diag Rd Buf
  778. Blks 00F5C5-00F787 (0001C3), BufAddr 01EB8A00-02082ABF, DBA 41EB8A00, BytesPerBlk 1040 Default Diag Wrt Buf
  779.  
  780.  
  781. F3 T>
  782. Prod Desc: Kahuna Tabu, 60zn, LBARO, ASD WPin+FFB+PFB+Combo+PSpin, 8/16/32GB
  783. Package Version: KH6T60.SDM1.DW15AN.SM16
  784. Serial #: W3701VZY
  785. Changelist: 00642433
  786. Model #: ST500LM000-1EJ162
  787. ID: 100
  788. CurrentCHS=3fff/10/3f MltSiz=010 DMAMod=22
  789.  
  790.  
  791.  
  792. Cache Search Hardware Info
  793. Target LBA 000000000000 Count 0000
  794. Config 0061 Status 0000
  795. Start Entry 00 End Entry FF
  796. Total Hits 000 Best Hit 1FF
  797. Active Entry 00 Delta 0000000000
  798. Hit FIFO[] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  799. First Hit Entry 00 Last Hit Entry 00
  800.  
  801. Cache Segments MV-LV Linked List Info
  802. MV Index 00 LV Index 00 Number of Valuable Segments 00
  803.  
  804. Free Cache Segments Linked List Info
  805. Free Head 00 Free Tail FF Number of Free Segments 100
  806. 00->01->02->03->04->05->06->07->08->09->0A->0B->0C->0D->0E->0F->
  807. 10->11->12->13->14->15->16->17->18->19->1A->1B->1C->1D->1E->1F->
  808. 20->21->22->23->24->25->26->27->28->29->2A->2B->2C->2D->2E->2F->
  809. 30->31->32->33->34->35->36->37->38->39->3A->3B->3C->3D->3E->3F->
  810. 40->41->42->43->44->45->46->47->48->49->4A->4B->4C->4D->4E->4F->
  811. 50->51->52->53->54->55->56->57->58->59->5A->5B->5C->5D->5E->5F->
  812. 60->61->62->63->64->65->66->67->68->69->6A->6B->6C->6D->6E->6F->
  813. 70->71->72->73->74->75->76->77->78->79->7A->7B->7C->7D->7E->7F->
  814. 80->81->82->83->84->85->86->87->88->89->8A->8B->8C->8D->8E->8F->
  815. 90->91->92->93->94->95->96->97->98->99->9A->9B->9C->9D->9E->9F->
  816. A0->A1->A2->A3->A4->A5->A6->A7->A8->A9->AA->AB->AC->AD->AE->AF->
  817. B0->B1->B2->B3->B4->B5->B6->B7->B8->B9->BA->BB->BC->BD->BE->BF->
  818. C0->C1->C2->C3->C4->C5->C6->C7->C8->C9->CA->CB->CC->CD->CE->CF->
  819. D0->D1->D2->D3->D4->D5->D6->D7->D8->D9->DA->DB->DC->DD->DE->DF->
  820. E0->E1->E2->E3->E4->E5->E6->E7->E8->E9->EA->EB->EC->ED->EE->EF->
  821. F0->F1->F2->F3->F4->F5->F6->F7->F8->F9->FA->FB->FC->FD->FE->FF
  822.  
  823. V0
  824.  
  825. Invalid Diag Cmd
  826.  
  827. F3 O>C0
  828.  
  829. READ_CACHE_CLUMP_SENTINEL
  830.  
  831. Clump Prev->Curr->Next 1stNode ValidLBAs EraseCnt WkRd/UECC SLCMode EraseFailCnt ProgramFailCnt
  832. 037B: 1000->037B->0452 817F 17C8 000008BC 00/00 0000 0000 0000
  833. 0452: 037B->0452->0530 BC6D 16DF 0000070C 00/00 0000 0000 0000
  834. 0530: 0452->0530->03D1 2075 14F0 00000B12 00/00 0000 0000 0000
  835. 03D1: 0530->03D1->03A8 29A0 1D1D 00000695 00/00 0000 0000 0000
  836. 03A8: 03D1->03A8->0352 4E1A 1447 00000BEF 00/00 0000 0000 0000
  837. 0352: 03A8->0352->072E B8E9 1338 00000AB9 00/00 0000 0000 0000
  838. 072E: 0352->072E->07BB 551D 1D00 00000CCB 00/00 0000 0000 0000
  839. 07BB: 072E->07BB->073F DEA6 1370 00000668 00/00 0000 0000 0000
  840. 073F: 07BB->073F->0792 7EBD 1478 00000C23 00/00 0000 0000 0000
  841. 0792: 073F->0792->0732 4DFA 1638 00000A46 00/00 0000 0000 0000
  842. 0732: 0792->0732->0525 A3FF 1CD7 0000062A 00/00 0000 0000 0000
  843. 0525: 0732->0525->0426 7001 17FF 0000068A 00/00 0000 0000 0000
  844. 0426: 0525->0426->072D 28F4 1AF7 0000081E 00/00 0000 0000 0000
  845. 072D: 0426->072D->0725 CE94 1788 000007B3 00/00 0000 0000 0000
  846. 0725: 072D->0725->03BD AB91 15BF 00000B14 00/00 0000 0000 0000
  847. 03BD: 0725->03BD->0705 5EC0 1191 0000077F 00/00 0000 0000 0000
  848. 0705: 03BD->0705->038C 1ECD 1010 0000065B 00/00 0000 0000 0000
  849. 038C: 0705->038C->04F9 D002 19D0 00000874 00/00 0000 0000 0000
  850. 04F9: 038C->04F9->0490 6131 1250 00000677 00/00 0000 0000 0000
  851. 0490: 04F9->0490->07D8 6884 1D00 00000883 00/00 0000 0000 0000
  852. 07D8: 0490->07D8->03C3 14B0 1162 0000063A 00/00 0000 0000 0000
  853. 03C3: 07D8->03C3->0576 9F86 10C0 00000CCB 00/00 0000 0000 0000
  854. 0576: 03C3->0576->05AA F339 1A90 00000858 00/00 0000 0000 0000
  855. 05AA: 0576->05AA->07C0 0BD5 14B0 00000ACF 00/00 0000 0000 0000
  856. 07C0: 05AA->07C0->03E3 B529 12E2 000008F4 00/00 0000 0000 0000
  857. 03E3: 07C0->03E3->0532 06F9 15D0 00000AEF 00/00 0000 0000 0000
  858. 0532: 03E3->0532->0583 D7CC 134F 00000694 00/00 0000 0000 0000
  859.  
  860. /////CUT
RAW Paste Data