Advertisement
Guest User

Untitled

a guest
Apr 3rd, 2018
590
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.78 KB | None | 0 0
  1.  
  2. AMIBIOS(C)2006 American Megatrends, Inc.
  3. MB-7580 Ver.WD0 04/26/2010
  4. CPU : Intel(R) Celeron(R) CPU E3400 @ 2.60GHz
  5. Speed : 2.60 GHz
  6.  
  7. Press DEL to run Setup (F4 on Remote Keyboard)
  8. Press n if you want to boot from the network
  9. Press F11 for BBS POPUP (F3 on Remote Keyboard)
  10. The MCH is operating with DDR2 800
  11. DRAM Timing: Tcl:6/Tras:18/Trp:6/Trcd:6/Twr:6/Trfc:52/Twtr:3/Trrd:3/Trtp:3
  12. Initializing USB Controllers .. Done.
  13. 2014MB OK
  14.  
  15. Auto-Detecting Pri Master..IDE Hard Disk
  16. Auto-Detecting 3rd Slave...IDE Hard Disk
  17. Pri Master : TRANSCEND 20101008
  18.  
  19. /boot/config: -S115200 -D
  20. Consoles: internal video/keyboard serial port
  21. BIOS drive C: is disk0 0078
  22. BIOS drive D: is disk1
  23. BIOS 639kB/2060928kB available memory
  24.  
  25. FreeBSD/x86 bootstrap loader, Revision 1.1
  26. (Mon Mar 19 06:56:31 CDT 2018 root@buildbot2.netgate.com)
  27. Loading /boot/defaults/loader.conf
  28. |
  29. __
  30. _ __ / _|___ ___ _ __ ___ ___
  31. | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
  32. | |_) | _\__ \ __/ | | \__ \ __/
  33. | .__/|_| |___/\___|_| |_|___/\___|
  34. |_|
  35.  
  36.  
  37. +============Welcome to pfSense===========+ __________________________
  38. | | / ___\
  39. | 1. Boot Multi User [Enter] | | /`
  40. | 2. Boot [S]ingle User | | / :-|
  41. | 3. [Esc]ape to loader prompt | | _________ ___/ /_ |
  42. | 4. Reboot | | /` ____ / /__ ___/ |
  43. | | | / / / / / / |
  44. | Options: | | / /___/ / / / |
  45. | 5. [K]ernel: kernel (1 of 2) | | / ______/ / / |
  46. | 6. Configure Boot [O]ptions... | |/ / / / |
  47. | | / /___/ |
  48. | | / |
  49. | | /_________________________/
  50. +=========================================+
  51.  
  52. /boot/kernel/kernel text=0x16e12f0 data=0xb6fa48+0x4c78a8 syms=[0x8+0x18a470+0x8+0x18afd2]
  53. Booting...
  54. KDB: debugger backends: ddb
  55. KDB: current backend: ddb
  56. Copyright (c) 1992-2017 The FreeBSD Project.
  57. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  58. The Regents of the University of California. All rights reserved.
  59. FreeBSD is a registered trademark of The FreeBSD Foundation.
  60. FreeBSD 11.1-RELEASE-p7 #10 r313908+986837ba7e9(RELENG_2_4): Mon Mar 26 18:08:25 CDT 2018
  61. root@buildbot2.netgate.com:/builder/ce-243/tmp/obj/builder/ce-243/tmp/FreeBSD-src/sys/pfSense amd64
  62. FreeBSD clang version 5.0.1 (tags/RELEASE_501/final 320880) (based on LLVM 5.0.1)
  63. VT(vga): resolution 640x480
  64. CPU: Intel(R) Celeron(R) CPU E3400 @ 2.60GHz (2593.55-MHz K8-class CPU)
  65. Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10
  66. Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  67. Features2=0xc00e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,OSXSAVE>
  68. AMD Features=0x20100800<SYSCALL,NX,LM>
  69. AMD Features2=0x1<LAHF>
  70. VT-x: HLT,PAUSE
  71. TSC: P-state invariant, performance statistics
  72. real memory = 2147483648 (2048 MB)
  73. avail memory = 1989296128 (1897 MB)
  74. Event timer "LAPIC" quality 100
  75. ACPI APIC Table: <042610 APIC1157>
  76. FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  77. FreeBSD/SMP: 1 package(s) x 2 core(s)
  78. ioapic0 <Version 2.0> irqs 0-23 on motherboard
  79. SMP: AP CPU #1 Launched!
  80. Timecounter "TSC-low" frequency 1296775499 Hz quality 1000
  81. iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
  82. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
  83. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80682e80, 0) error 1
  84. random: entropy device external interface
  85. wlan: mac acl policy registered
  86. ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
  87. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
  88. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8065c1c0, 0) error 1
  89. ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
  90. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
  91. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8065c270, 0) error 1
  92. ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
  93. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
  94. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8065c320, 0) error 1
  95. iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
  96. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
  97. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80682d20, 0) error 1
  98. iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
  99. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
  100. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80682dd0, 0) error 1
  101. kbd1 at kbdmux0
  102. netmap: loaded module
  103. module_register_init: MOD_LOAD (vesa, 0xffffffff81162bc0, 0) error 19
  104. nexus0
  105. vtvga0: <VT VGA driver> on motherboard
  106. cryptosoft0: <software crypto> on motherboard
  107. padlock0: No ACE support.
  108. acpi0: <042610 RSDT1157> on motherboard
  109. acpi0: Power Button (fixed)
  110. cpu0: <ACPI CPU> on acpi0
  111. cpu1: <ACPI CPU> on acpi0
  112. attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
  113. Timecounter "i8254" frequency 1193182 Hz quality 0
  114. Event timer "i8254" frequency 1193182 Hz quality 100
  115. atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
  116. Event timer "RTC" frequency 32768 Hz quality 0
  117. Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
  118. acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
  119. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
  120. pcib0: _OSC returned error 0x10
  121. pci0: <ACPI PCI bus> on pcib0
  122. vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
  123. agp0: <Intel G41 SVGA controller> on vgapci0
  124. agp0: aperture size is 256M, detected 32764k stolen memory
  125. vgapci0: Boot video device
  126. pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
  127. pcib1: [GIANT-LOCKED]
  128. pci1: <ACPI PCI bus> on pcib1
  129. em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x9c00-0x9c1f mem 0xfe6e0000-0xfe6fffff,0xfe6dc000-0xfe6dffff irq 16 at device 0.0 on pci1
  130. em0: Using MSIX interrupts with 3 vectors
  131. em0: Ethernet address: 00:90:7f:a3:b9:a8
  132. em0: netmap queues/slots: TX 1/1024, RX 1/1024
  133. pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
  134. pcib2: [GIANT-LOCKED]
  135. pci2: <ACPI PCI bus> on pcib2
  136. em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xac00-0xac1f mem 0xfe7e0000-0xfe7fffff,0xfe7dc000-0xfe7dffff irq 17 at device 0.0 on pci2
  137. em1: Using MSIX interrupts with 3 vectors
  138. em1: Ethernet address: 00:90:7f:a3:b9:a9
  139. em1: netmap queues/slots: TX 1/1024, RX 1/1024
  140. pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
  141. pcib3: [GIANT-LOCKED]
  142. pci3: <ACPI PCI bus> on pcib3
  143. em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xbc00-0xbc1f mem 0xfe8e0000-0xfe8fffff,0xfe8dc000-0xfe8dffff irq 18 at device 0.0 on pci3
  144. em2: Using MSIX interrupts with 3 vectors
  145. em2: Ethernet address: 00:90:7f:a3:b9:aa
  146. em2: netmap queues/slots: TX 1/1024, RX 1/1024
  147. pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
  148. pcib4: [GIANT-LOCKED]
  149. pci4: <ACPI PCI bus> on pcib4
  150. em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xcc00-0xcc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 19 at device 0.0 on pci4
  151. em3: Using MSIX interrupts with 3 vectors
  152. em3: Ethernet address: 00:90:7f:a3:b9:ab
  153. em3: netmap queues/slots: TX 1/1024, RX 1/1024
  154. pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
  155. pcib5: [GIANT-LOCKED]
  156. pci5: <ACPI PCI bus> on pcib5
  157. em4: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 16 at device 0.0 on pci5
  158. em4: Using MSIX interrupts with 3 vectors
  159. em4: Ethernet address: 00:90:7f:a3:b9:ac
  160. em4: netmap queues/slots: TX 1/1024, RX 1/1024
  161. pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
  162. pcib6: [GIANT-LOCKED]
  163. pci6: <ACPI PCI bus> on pcib6
  164. em5: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 17 at device 0.0 on pci6
  165. em5: Using MSIX interrupts with 3 vectors
  166. em5: Ethernet address: 00:90:7f:a3:b9:ad
  167. em5: netmap queues/slots: TX 1/1024, RX 1/1024
  168. uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x7080-0x709f irq 23 at device 29.0 on pci0
  169. usbus0 on uhci0
  170. usbus0: 12Mbps Full Speed USB v1.0
  171. uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x7000-0x701f irq 19 at device 29.1 on pci0
  172. usbus1 on uhci1
  173. usbus1: 12Mbps Full Speed USB v1.0
  174. uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x6c00-0x6c1f irq 18 at device 29.2 on pci0
  175. usbus2 on uhci2
  176. usbus2: 12Mbps Full Speed USB v1.0
  177. uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x6880-0x689f irq 16 at device 29.3 on pci0
  178. usbus3 on uhci3
  179. usbus3: 12Mbps Full Speed USB v1.0
  180. ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe4ff800-0xfe4ffbff irq 23 at device 29.7 on pci0
  181. usbus4: EHCI version 1.0
  182. usbus4 on ehci0
  183. usbus4: 480Mbps High Speed USB v2.0
  184. pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
  185. pci7: <ACPI PCI bus> on pcib7
  186. fxp0: <Intel 82801GB (ICH7) 10/100 Ethernet> port 0x8c00-0x8c3f mem 0xfe5ff000-0xfe5fffff irq 20 at device 8.0 on pci7
  187. miibus0: <MII bus> on fxp0
  188. inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
  189. inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
  190. fxp0: Ethernet address: 00:90:7f:a3:b9:a7
  191. isab0: <PCI-ISA bridge> at device 31.0 on pci0
  192. isa0: <ISA bus> on isab0
  193. atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
  194. ata0: <ATA channel> at channel 0 on atapci0
  195. atapci1: <Intel ICH7 SATA300 controller> port 0x7c00-0x7c07,0x7880-0x7883,0x7800-0x7807,0x7480-0x7483,0x7400-0x740f mem 0xfe4ffc00-0xfe4fffff irq 19 at device 31.2 on pci0
  196. ata2: <ATA channel> at channel 0 on atapci1
  197. ata3: <ATA channel> at channel 1 on atapci1
  198. acpi_button0: <Power Button> on acpi0
  199. uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
  200. uart0: console (115200,n,8,1)
  201. uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
  202. ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
  203. ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
  204. ppbus0: <Parallel port bus> on ppc0
  205. lpt0: <Printer> on ppbus0
  206. lpt0: Interrupt-driven port
  207. ppi0: <Parallel I/O> on ppbus0
  208. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
  209. atkbd0: <AT Keyboard> irq 1 on atkbdc0
  210. kbd0 at atkbd0
  211. atkbd0: [GIANT-LOCKED]
  212. est0: <Enhanced SpeedStep Frequency Control> on cpu0
  213. est: CPU supports Enhanced Speedstep, but is not recognized.
  214. est: cpu_vendor GenuineIntel, msr 6160d2506000d25
  215. device_attach: est0 attach returned 6
  216. est1: <Enhanced SpeedStep Frequency Control> on cpu1
  217. est: CPU supports Enhanced Speedstep, but is not recognized.
  218. est: cpu_vendor GenuineIntel, msr 6160d2506000d25
  219. device_attach: est1 attach returned 6
  220. Timecounters tick every 1.000 msec
  221. nvme cam probe device init
  222. ugen0.1: <Intel UHCI root HUB> at usbus0
  223. ugen4.1: <Intel EHCI root HUB> at usbus4
  224. uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  225. uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
  226. ugen3.1: <Intel UHCI root HUB> at usbus3
  227. ugen1.1: <Intel UHCI root HUB> at usbus1
  228. uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
  229. uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  230. ugen2.1: <Intel UHCI root HUB> at usbus2
  231. uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
  232. uhub0: 2 ports with 2 removable, self powered
  233. uhub3: 2 ports with 2 removable, self powered
  234. uhub2: 2 ports with 2 removable, self powered
  235. uhub4: 2 ports with 2 removable, self powered
  236. uhub1: 8 ports with 8 removable, self powered
  237. ada0 at ata0 bus 0 scbus0 target 0 lun 0
  238. ada0: <TRANSCEND 20101008> ATA device
  239. ada0: Serial Number A95743AF23920D0005F0
  240. ada0: 16.700MB/s transfers (WDMA2, PIO 512bytes)
  241. ada0: 973MB (1993824 512 byte sectors)
  242. ada1 at ata2 bus 0 scbus1 target 1 lun 0
  243. ada1: <HTS721060G9SA00 MC3OC10V> ATA-7 SATA 1.x device
  244. ada1: Serial Number MPCCN8Y3H9J7DL
  245. ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
  246. ada1: 57231MB (117210240 512 byte sectors)
  247. Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement