0.7.5 with pcie nvme card

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.07.16 22:59:17 =~=~=~=~=~=~=~=~=~=~=~=
Channel 0: LPDDR4,50MHz
CS = 0
U-Boot SPL board init

U-Boot SPL 2017.09-rockchip-ayufan-1011-g9659690159 (Jul 15 2018 - 21:03:45)
booted from SD
Trying to boot from MMC2
NOTICE:  BL31: v1.3(debug):d98d16e
NOTICE:  BL31: Built : 15:03:07, May 10 2018
th legacy support detected. ARM vice without OPTEE initializatioinitializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = DCDC_REG2@vdd_cpu_l: ; enabling
LDO_REG1@vcc1v8_dvp: set 1800000LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
LDO_REG4@vcc_sd: ; enabling
LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
LDO_REG6@vcc_1v5: set 1500000 uV; enabling
LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
LDO_REG8@vcc_3v0: set 3000000 uV; enabling
SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
vcc3v3-sys@vcc3v3_st: -38)
vdd-log@vdd_log: ; enabling (ret: -38)
MMC:   0: 1
SF: Detected gd25q128 with page *** Warning - bad CRC, using defselect!
mmc_init: -95, time 20
switch to partitions #0, OK
mmc1 is current device
1055 bytes read in 17 ms (60.5 KiB/s)
select kernel
1:  kernel-80a5365002
2:  kernel-4.4.132-10-memtest
Enter choice:  file: /boot/initrd.img-4.4.132-t/vmlinuz-4.4.132-1057-rockchip-1.6 MiB/s)
append: rw panic=10  cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
Retrieving fiB/s)
 01f00000
   Booting using the 4ee ... OK
   Loading Device Tree to 00
Starting kernel ...

physical CPU 0x0
[    0.000000]g1f80a5365002 (root@runner-f725ff63-project-5943294-concurrent-1) (gcc version 7.3.0 (Ubuntu/Lin[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detectedci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: M erratum 845719
[    0.000000] Built 1 zonelists in Zone orderoup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
mem 0xf7ea1000-0xf7ee1000] (0MB) mapped at [ffffffc0f7ea1000-ffffffc0f7ee0fff]
2890000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00a0000
[    0.000000] GIC: using cache flushing for LPI propertypartition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
k_vop1, rate changes may not wor[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9d wraps every 4398046511097ns
[    0.001985] Console: colour d.002742] bootconsole [uart0] dison 4.4.132-1057-rockchip-ayufan-n Jul 16 19:40:26 UTC 2018
[   cessor [410fd034]
[    0.0000000.000000] psci: MIGRATE_INFO_TYP[    0.000000] Kernel command lithaddr=aa:41:29:23:dc:d1 eth1addache hash table entries: 262144 1902K kernel code, 1672K rwdata,erved)
[    0.000000] Virtual k000]     modules : 0xffffff80000lloc : 0xffffff8008000000 - 0xfffff8009040000 - 0xffffff80091600.000000]       .data : 0xffffff8maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffal)
[    0.000000]     fixed   ffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64rom NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @f2900000 (psz 64K, shr 0)
[    0.000000] ITS: using ca 0.000000] GIC: using LPI property table @0x00000000f2890000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] 0.000000] GIC: using cache flushing for LPI property table
[  u@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@   0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksourcdc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 5, wraps every 4398046511097ns
[002742] bootconsole [uart0] disabled
[    0.003144] Calibrating  0.004312] Initializing cgroup 004371] Initializing cgroup subsup subsys pids
[    0.004460] ftrace: allocating 44199 entries in 173 pages
[    0.118271] sched-energy: Sched-energy-costs ininterrupt-controller@fee00000/in00
[    0.123531] CPU1: update cpu_capacity 401
[    0.123535] CPU1: Booted secondary processo 0.124090] CPU2: found redistribPI pending table @0x00000000f2b6e cpu_capacity 401
[    0.12415sor [410fd034]
[    0.124684] D LPI pending table @0x00000000f2bc0000
[    0.124760] CPU3: update cpu_capacity 401
[    0.124essor [410fd034]
[    0.125286] Detected PIPT I-cache on CPU4
[    0.125312] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.125351] CPU4: using LPI pending table @0x00000000f2bf0000
[    0.125390] CPU4: update cpu_capacity 1024
[    0.125394] CPU4: Booted secondary5949] Detected PIPT I-cache on CPU5
[    0.125967] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.126004] CP0000000f2020000
[    0.126032] CPU5: update cpu_capacity 1024
[    0.126035] CPU5: Booted secondary processor [410fd082]
[    0.126124] Brought up 6 CPUs
[ cksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.142559] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.143033] xor: measuring software checksum speed
[    0.152626]    8regs     :  28763244.000 MB/sec
[    0.182794]    32regs_prefetch:  2868.000 MB/sec
[    0.182814] xor: using
[    0.191723] cpuidle: using c26000, 1 data @ ffffff8009164000)
[    0.192103] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.192646]323] vcc3v3_pcie: supplied by dc    0.503627] platform ff8f0000.oup 0
[    0.503720] iommu: Add 0
[    0.504966] SCSI subsysteriver hub
[    0.505487] usbcore: registered new device driver usb
[    0.505590] media: Linux media interface: v0.10
[    0.505638] Linux video capture interface: v2.00
[    0.505712] pps_core: LinuxPPS API ver. 1 registered
[    0.505731] pps_core: Software ver. 5.3.6 - Copyright  Architecture Driver Initialized.
[    0.507407] Bluetooth: Core ver 2.21
[    0.507447] NET:     0.507466] Bluetooth: HCI device and connection manager initialized
[    0.507491] Bluetooth: HCI socket layer initialized
[    0.507514] Bluetooth: L2CAP socket layer initialized
[    0.507551] Bluetooth: SCO socket layer initialized
[    0.507927] NetLabel: Initializing
[    0.507947] NetLabel:  domain hash sel:  protocols = UNLABELED CIPSOSwitched to clocksource arch_sys sustainable_power will be estimered protocol family 2
[    0.5 backchannel transport module.
[    0.564248] Trying to unpack rootfs image as initramfs...
[    0.875732] Freeing initrd memo_a72 PMU driver, 7 counters available
[    0.877632] kvm [1]: 8ully
[    0.877793] kvm [1]: interrupt-controller@fff20000 IRQ10
[    0.878025] kvm [1]: timer IRQ12
[    0.881069] audit: initializing netlink subsys (disabled)
[    0.881122] audit: type=2000 audit(0.804:1): initialized
[    0.881928] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.889208] VFS: Disk quotas dquot_6.6.0
[    0.889382] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.891044] squashfs: version 4.0 (2009/01/31) Philli pdev_name="armv7sec.0"
[    0.metric registered
[    0.906229[    0.906594] io scheduler noopcheduler deadline registered (default)
[    0.906672] io scheduler cfq registered
[    0.908036] phy phy-ff770000.syscon:usb2-upply regulator
[    0.913744] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.913787] dma-pl33012 Num_Events-12
[    0.915362] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.915399] dma-pl33i-20 Num_Events-16
[    0.915938] pwm-regulator: supplied by vc50/16550 driver, 5 ports, IRQ sharing disabled
[    0.918235] ff1a0000.serial: ttyS2 at MMIO 0x[    1.039452] [drm] Rockchip DRM driver version: v1.0.1
[    1.040421] usbcore: register[    1.042253] Unable to detect [    1.043520] brd: module loaded
[    1.049255] loop: module loaded
[    1.049584] lkdtm: No cra0000.spi: Failed to request TX DMA channel
[    1.052312] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[    1.052920] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
   1.055083] Creating 3 MTD partitions on "spi32766.0":
[    1.055553] 0x000000000000-0x0000003f8000 : "loader"
[    1.056923] 0x0000003f8000-0x000000400000 : "env"
.063496] rk_gmac-dwmac fe300000.00000.ethernet: init for RGMII
.070787]  Ring mode enabled
[    1.071084]  DMA HW capability re supported (type 2)
[    1.072orted
[    1.072703]  Wake-Up O Enable RX Mitigation via HW Watrobed
[    1.144623] eth%d: PHY[    1.147118] Rockchip WiFi SYS[    1.150032] rockchip-dwc3 usb@fe800000: failed to get drvdata 'Enhanced' Host Controller (EHCI) Driver
[    1.158011] ehci-pci: EHCI PCI platform driver
[    1.158470] ehci-platform: EHCI
[    1.163531] ehci-platform feed, assigned bus number 1
[    .usb: irq 30, io mem 0xfe3c0000
[    1.170861] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.171579] usb usb1: 10] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.172882] usb usb1: Product: EHCI Host Controller
[    1.173329] usb usb1: Manufacturer: Linux 4.4.132-1057-rockch
[    1.174114] usb usb1: SerialNumber: fe3c0000.usb
[    1.175033] hub 1-0:1.0: USB hub found
[    1.175403] hub 1-0:1.0: 1 port detected
[    1.176326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.176920] ohci-platform: OHCI generic platform driver
[    1.177910] ohci-platform SB bus registered, assigned bus [    1.235008] usb usb2: New USB device found, idVendor=1d6b, idt: Generic Platform OHCI controli_hcd
[    1.237622] usb usb2: [    1.238695] hub 2-0:1.0: USB hub found
[    1.239136] hub 2-0:1.0: 1 port detected
emotectl v1.1 init
[    1.24493nput0
k808-regulator: there is no dvs0lator rk808-regulator: there is no dvs1 gpio
[    1.260025] DCD[    1.262142] DCDC_REG3: supplied by vcc_sys
[    1.262794] DCDC_REG4: supplied by vcc_sys
[  at ffffff80095fe000
NONE
[    1.294982] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I553] IR Sony protocol handler initialized
[    1.298990] IR SANYO protocol handler initialized
[    1.299425] IR Sharp protocol handler initialized
[    1.29.300404] IR XMP protocol handler initialized
[    1.300994] usbcore: registered new interface driver uvcvideo
[    1.301515] USB Video Class driver (1.1.1)
[    1.304535] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    1.305527] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[    1.307258] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.308048] Bluetooth: Virtual HCI driver ver 1.5
[    1.30 ver 2.3
[    1.309030] Bluetooriver
[    1.319556] sdhci: Copyright(c) Pierre Ossman
[    1.319971] Synopsys Designware Multimedia Card Interface Driver
[    1.321384] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-mmc: No vqmmc regulator found
[    1.327008] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.327689] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.328337] dwmmc_rockchip f fe320000.dwmmc: DW MMC controlldth,256 deep fifo
[    1.329798] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.330652] dwmmc_rockchip fe320000.dwmmc: No1482] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.332317] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 dont req 400000Hz, actual 400000HZ div = 0)
320000.dwmmc: 1 slots initializeDHCI platform and OF driver helpoller on fe330000.sdhci [fe33000ed new interface driver usbhid
    1.401913] Netfilter messages via NETLINK v0.30.
[    1.4024ter if you need this.
[    1.40ata_parse_dt: wifi power controled by gpio.
[    1.415459] [WLAt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    1.416312] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.416802] tooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    1.419271] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    1.420061] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: B] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    1.420930] ) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    1.423759] [BT_RFKILL]: Request irq for bt wakeup host
[    1.423789] mmc0: new high speed SDHC card at address aaaa
[    mc0:aaaa SC32G 29.7 GiB
[    1[    1.428553] Registered cp15_barrier emulation handler
[    1.429172] Registered setend emula[    1.431075] registered taskstats version 1
[    1.436272] Btrfs loaded, integrity-checker=on
[    1.438007] BTRFS: selftest: Running btrfs free space cache tests
[    1.438677] BTRFS: selftest: Running extent only tests
[    1.438877] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    1.438   1.438888] GPT:Alternate GPT header not at the end of the disk.
[    1.438893] GPT:4188159 != 62333951
[    1.438896] GPT: Use GNU Parted to correct GPT err1 p2 p3 p4 p5 p6 p7
[    1.442192] BTRFS: selftest: Running bitmap only tests
[    1.442780] BTRFS: selftest: Running bitmap and extent tests
[    1.443443] BTRFS: selftest: Running space stealing from bitmap to extent
[    1.445622] BTRFS: selftest: Free space cache tests finished
[    1.446181] BTRFS: selftest: Running extent buffer operation tests
[    1.446724] BTRFS: selftest: Running btrfs_split_item tests
[    1.447437] BTRFS: selftest: Running find delalloc tests
[    1.643003] BTRFS: selftest: Running btrfs_get_extent tests
ent test
[    1.644220] BTRFS: selftest: Running outstanding_extents tests
[    1.644770] BTRFS: selftest: Running qgroup testiple refs test
[    1.659274] phy phy-ff770000.syscon:usb2-phy@e450.5: Failed to get VBUS supply regulator
[    1.661425] rockchip-drm dispt
[    1.662141] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[    1.662817] rockcrequest PWM
[    1.663333] rockchip-drm display-subsystem: boun rockchip-vop ff900000.vop: unable to request PWM
[    1.665262] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008cee638)
[    1.666048] ERROR: Bad of_node_put() on /hdmi@ff940000/ports/port/endpoint@1
[    1.666675] CPU: 5 PID: 6 Comm: kworker/u12:0 Not tainted 4.4.132-1057-rockchip-ayufan-g1f80a5365002 #1
[    1.667506] Hardware name: Pine64 RockPro64 (DT)
[    1.667927] Workqueue: deferstack+0x24/0x30
[    1.669557] [<ffffff800855cd6c>] dump_stack+0x98/0xc0
[    1.670009] [<fffff800855effc>] kobject_put+0x178/x68
[    1.671947] [<ffffff8008948ce8>] of_get_next_child+0x40/0x64
[    1.672479] [<ffffff800894c858>] of_graph_get_next_endpoint+0xf0/0x134
[    1.673096] _possible_crtcs+0x68/0xe4
[    1.673704] [<ffffff8008675348>] dw_hdmi_rockchip_bind+0xb8/0x5b8
[    1.674280] [<ffffff80086ac1208
[    1.674842] [<ffffff800868229c>] rockchip_drm_bind+0x424ter.part.2+0xa0/0x114
[    1.676037] [<ffffff80086abf20>] component_add+0xe0/0x124
[    1.676554] [<ffffff800867618c>] cdn_dp_probe+0x158/0x16c
[    1.677068drv_probe+0x5c/0xb0
[    1.677615] [<ffffff80086b18c0>] driver_c>] bus_for_each_drv+0x90/0xa0
[    1.679294] [<ffffff80086b154lay-subsystem: bound ff940000.hdmi (ops 0xffffff8008ce4950)
1.695031] Hardware name: Pine64 .697888] [<ffffff800894df70>] oftform_drv_probe+0x5c/0xb0
[    86af97c>] bus_for_each_drv+0x90/0xa0
[    1.707674] [<ffffff8001] [<ffffff80080cff20>] worker_thread+0x2d0/0x38c
[    1.711111] [<ffffff80080d4db4>] kthread+0xe0/0xf0
[    1.711595] [<ffffff8008082ef0>] ret_from_fork+0x10/0x20
1.713764] cdn-dp fec00000.dp: Di    1.714713] [drm] Supports vbl10.2013).
[    1.715359] [drm] estamp query.
[    1.716120] rockchip-drm display-subsystem: fawitching to colour frame buffer [    2.043383] xhci-hcd xhci-hcdassigned bus number 3
[    2.045194] xhci-hcd xhci-hcd.5.auto: n 0x110 quirks 0x02030010
[     device found, idVendor=1d6b, id usb3: New USB device strings: M2.049888] usb usb3: SerialNumber: xhci-hcd.5.auto
 xHCI Host Controller
[    2.05sb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.055629] usb usb4: New USB devicialNumber=1
[    2.056410] usb nufacturer: Linux 4.4.132-1057-ri-hcd
[    2.057821] usb usb4: SerialNumber: xhci-hcd.5.auto
[    2.059015] hub 4-0:1.0: USB hub found
[    2.059431] hub 4-.5.auto: remove, state 1
[    2t, device number 1
[    2.090274] xhci-hcd xhci-hcd.5.auto: USB bus 3 deregistered
[    2.096791] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    2.097618] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3
[    2.098556] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[    2.099515] xhci-hcd xhci-hcd.6.auto: irq 225, io mem 0xfe900000
[    2.100281] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.100997] usb usb3: New USB device strings: M
[    2.101744] usb usb3: Product: xHCI Host Controller
[    2.102260] usb usb3: Manufacturer: Linux 4.4.132-1057-rockchip-ayufan-g1f80a5365002 xhci-hcd
[    : xhci-hcd.6.auto
[    2.104338] hub 3-0:1.0: USB hub found
[    2.104752] hub 3-0:1.0: 1 port detected
.6.auto: xHCI Host Controller
[    2.115663] xhci-hcd xhci-hcd[    2.130275] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.138824] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.147395] usb usb4: Product: xHCI Host Controller
[    2.155776] usb usb4: Manufacturer: Linux 4.4.132-1057-rockchip-ayufan-g1f80a5365002 xhci-hcd
[    2.184311] hub 4-0:1.0: 1 port detected
 1.00
Product=0002
 device strings: Mfr=3, Product=[    2.278988] usb usb5: Product: EHCI Host Controller
[    2.288677] usb usb5: Manufacturer: Linux 4.4.132-1057-rockch
[    2.309697] hub 5-0:1.0: USB hub found
[    2.319357] hub 5-0:1.0: 1 po[    2.329909] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    2.409517] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.428123] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
310000.dwmmc: No vqmmc regulator[    2.591991] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slo[    2.620788] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:08 UTC (1358499008)
[    2.640984] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    2.674336] vcc3v3_pcie: disabling
t req 200000Hz, actual 200000HZ key/input/input1
ound.

Loading, please wait...
starting version 237
[    3.013069] mali ff9a0000.gpu: leakage=43
[    3.018616] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    3.021490] mali ff9a0000.gpu: Protected mode not available
[    3.024856] ERROR: Bad of_node_put() on /gpu@ff9a0000
[    3.027212] CPU: 4 PID: 204 Comm: systemd-udevd Not tainted 4.4.132-1057-rockchip-ayufan-g1f80a5365002 #1
[    3.030198] Hardware name: Pine64 RockPro64 (DT)
[    3.032563] Call trace:
8>] dump_backtrace+0x0/0x220
c>] dump_stack+0x98/0xc0
[    3.041338] [<ffffff800894df7
0>] kbase_simple_power_model_init+0xa8/0xe8 [midgard_kbase]
[    3.062865] [<ffffff8000c66a9[    3.065319] [<ffffff8000c4aab4>] platform_drv_probe+0x5c/0xb0[    3.072256] [<ffffff80086b1a8[    3.076691] [<ffffff80086b11c[    3.078877] [<ffffff80086b0d90>] bus_add_driver+0x1fc/0x240
c>] driver_register+0xa0/0xd8
[    3.083293] [<ffffff80086b380[    3.085745] [<ffffff8000cc8010>] do_init_module+0x64/0x1b8
[    3.092593] [<ffffff800813835ali-simple-power-model, and fallback mali-simple-power-model
[    3.108711] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 399; [Func] : kbase_devfreq_init(imple.
[    3.118261] rockchip-pcie f80r found

pcie@f8000000 ranges:
.0xfbdfffff -> 0xfa000000
[    3.202275]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    3.208113] rockchip-pcie f80[    3.213893] pci_bus 0000:00: root bus resource [bus 00-1f]
[    3.219521] pci_bus 0000:00: [    3.231674] pci 0000:00:00.0:bus 00-00]), reconfiguring
[    3.239933] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000[    3.251703] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.257251] pci 0000:00:00.0:   bridge window [mem 0xfa000000-0xfa0fffff]
00.0: enabling device (0000 -> 0002)
[    3.265625] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
 Signaling PME through PCIe PME interrupt
pts/init-premount ... done.
BegBegin: Running /scripts/local-toBegin: Running /scripts/local-premount ... done.
[    3.998463] systemd[1]: Systeing clock.
00-2006 Netfilter Core Team
[    4.165071] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.183577] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 18.04 LTS!

[    4.208085] systemd[1]: Set hostname to <rockpro64>.
[    4.220001] random: systemd: uninitialized urandom read (16 bytes read, 61 bits of entropy avalizing machine ID from random gnald.service:36 configures an IPport BPF/cgroup based firewallin[    4.758332] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Noed target System Time Synchronized.
et System Time Synchronized.
[    4.994097] random: systemd: uninitialized urandom read (16 bytes read, 84 bits of entropy available)
[    5.009753] systemd[1]: Reached target Swap.
[  OK  ] Created slice System Slice.
uninitialized urandom read (16 b[  OK  ] Listening on Journal Socket (/dev/log).
[    5.104024] random: systemd: uninitialized urandom read (16 bytes read, 85 bits of entropy available)
[    5.114718] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
ard Password Requests to Wall Directory Watch.
[    5.126997] random: systemd: ytes read, 85 bits of entropy available)
ed ntp-systemd-netif.path.
[  OK  ] Started ntp-[    5.146988] random: systemd: uninitialized urandom read (16 bytes read, 85 bits of entropy av[    5.156400] systemd[1]: Listety Named Pipe.
[  OK  ] Listening on[    5.168008] random: systemd: uninitialized urandom read (16 bytes read, 86 bits of entropy aved slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    5.186012] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
ed slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    5.205539] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[    5.224253] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    5.233271] systemd[1]: Listening on Journal Socket.
tem...
[    5.262641] systemd[1]: Startdules...
ing Create list of required stat required st…ce nodes for the [    5.309501] systemd[1]: Start         Starting Set the console keyboard layout...
lock...
ing Remount Root and Kernel Fileing Nameserver information managing Journal Service...
atch Password Requests to Consol[  OK  ] Reached targ[    5.459536] systemd[1]: Starting udev Coldplug all Devices...[    5.482389] systemd[1]: Start[  OK  ] Started Load Kernel Modules.
ed Create list of required static device nodes for the current kernel.
[    5.511353] systemd[1]: Started Restore / save the current clock.
[  OK  ] Started Restore / save the current clock.
[  OK  ] Started Remount Root and Kernel File Systemsel Debug File System.
ing Load/Save Random Seed...
         Starting Load/Save Random Seed...
[    5.571934] systemd[1]: Starting Create Static Device Nodes i         Starting Create Static Device Nodes in /dev...
[    5.584476] systemd[1]: Start         Starting Apply Kernel Variables...
[    5.597030] systemd[1]: Mounting Kernel Configuration File System...
         Mounting Kernel Configuration File System...
[    5.609150] systemd[1]: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[    5.619234] systemd[1]: Started Journal Service.
[    5.624357] ERROR: Bad of_nod[  OK  ] Started Journal Service.
y Kernel Variables.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Network (Pre).
         Starting Flush Journal e...
[  OK  ] Started Flushdmi-dp-sound: ASoC: CPU DAI (nu[  OK  ] Listening on[  OK  ] Reached target Sound Card.
         Starting Load/Save RF Kill Switch Status...
[    6.244734] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1
[    6.244739] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
[    6.244743] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P
[    6.244747] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN[    6.246993] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to add ELD: -16
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Found device /dev/disk/by-label/boot.
         Mounting /boot/efi...
[  OK  ] Mounted /boot/efi.
[  OK  ] Reached target Local File Systems.
[  OK  ] Started Creas.
         Starting Update UTMP ab[  OK  ] Started Set console font and keymap.
wn.
[  OK  ] Reached targage of the Day.
         Starting Login Service...
         Starting Initializes zram swaping...
[  OK  ] Started D-Bus System Message Bus.
the CPU Frequency Scaling govern[  OK  ] Started Dail[  OK  ] Started Dailes.
[  OK  ] Reached target Timers.
[  OK  ] Started Network Name Resolution.
[  OK  ] Started Raise network interfaces.
[  OK  ] Started Initializes zram swaping.
[  OK  ] Started resolvconf-pull-resolved.service.
[  OK  ] Started Resets System Activity Data Collector.
[  OK  ] Started Logi[  OK  ] Reached target Host and Network Name Lookups.
[  OK  ] Started Save/Restore Sound Card State.
         Starting resolvconf-pull-resolved.service...
[  OK  ] Started resolvconf-pull-resolved.service.
[  OK  ] Started Network Manager.
et Network.
[  OK  ] Started Set console scheme.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started OpenBSD Secure Shell server.
kd.
[  OK  ] Started Rock 64 First boot.
[  OK  ] Reached targ[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Ch

Ubuntu 18.04 LTS rockpro64 ttyS2

rockpro64 login: