Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- PC Engines APU BIOS build date: Apr 5 2014
- Reading data from file [bootorder]
- SeaBIOS (version ?-20140405_120742-frink)
- SeaBIOS (version ?-20140405_120742-frink)
- Found coreboot cbmem console @ 7e150400
- Found mainboard PC Engines APU
- Relocating init from 0x000e8e71 to 0x7e1065e0 (size 39259)
- Found CBFS header at 0xfffffb90
- found file "bootorder" in cbmem
- CPU Mhz=1000
- Found 28 PCI devices (max PCI bus is 05)
- Copying PIR from 0x7e160400 to 0x000f27a0
- Copying MPTABLE from 0x7e161400/7e161410 to 0x000f25b0 with length 1ec
- Copying ACPI RSDP from 0x7e162400 to 0x000f2590
- Copying SMBIOS entry point from 0x7e16d800 to 0x000f2570
- Using pmtimer, ioport 0x808
- Scan for VGA option rom
- EHCI init on dev 00:12.2 (regs=0xf7f08420)
- Found 1 lpt ports
- Found 2 serial ports
- AHCI controller at 11.0, iobase f7f08000, irq 11
- EHCI init on dev 00:13.2 (regs=0xf7f08520)
- EHCI init on dev 00:16.2 (regs=0xf7f08620)
- Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
- AHCI/0: registering: "AHCI/0: SATA SSD ATA-10 Hard-Disk (15272 MiBytes)"
- Searching bootorder for: /rom@img/setup
- Searching bootorder for: /rom@img/memtest
- OHCI init on dev 00:12.0 (regs=0xf7f04000)
- OHCI init on dev 00:13.0 (regs=0xf7f05000)
- OHCI init on dev 00:14.5 (regs=0xf7f06000)
- OHCI init on dev 00:16.0 (regs=0xf7f07000)
- Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
- Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
- USB MSC vendor='Multiple' product='Card Reader' rev='1.00' type=0 removable=1
- Device reports MEDIUM NOT PRESENT
- scsi_is_ready returned -1
- Unable to configure USB MSC drive.
- Unable to configure USB MSC device.
- All threads complete.
- Scan for option roms
- Running option rom at c000:0003
- iPXE (http://ipxe.org) 00:00.0 C000 PCI2.10 PnP PMMpmm call arg1=1
- pmm call arg1=0
- +7E0E9450pmm call arg1=1
- pmm call arg1=0
- +7E049450 C000
- Searching bootorder for: /rom@genroms/pxeboot.rom
- Build date: Apr 5 2014
- System memory size: 2017 MB
- Press F12 for boot menu.
- Searching bootorder for: HALT
- drive 0x000f2500: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=31277232
- Space available for UMB: c1000-ee800, f0000-f2500
- Returned 253952 bytes of ZoneHigh
- e820 map has 6 items:
- 0: 0000000000000000 - 000000000009fc00 = 1 RAM
- 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
- 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
- 3: 0000000000100000 - 000000007e14e000 = 1 RAM
- 4: 000000007e14e000 - 000000007f000000 = 2 RESERVED
- 5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED
- enter handle_19:
- NULL
- Booting from Hard Disk...
- Booting from 0000:7c00
- F1 FreeBSD
- F2 FreeBSD
- F6 PXE
- Boot: F2
- //bboooott//ccoonnffiigg:: --SS111155220000 --DDhh
- Consoles: internal video/keyboard serial port
- BIOS drive C: is disk0
- BIOS 639kB/2064696kB available memory
- FreeBSD/x86 bootstrap loader, Revision 1.1
- ([email protected], Sun Jan 18 15:13:22 CET 2015)
- Loading /boot/defaults/loader.conf
- \
- ____ _____ _____ ____ ____
- | _ \ / ____| __ \| _ \| _ \
- | |_) | (___ | | | | |_) | |_) |
- | _ < \___ \| | | | /| __/
- | |_) |____) | |__| | |\ \| |
- | | | | | | | |
- |____/|_____/|_____/|_| |_|_| 0.7 ``` `
- s` `.....---.......--.``` -/
- +------------Welcome to FreeBSD-----------+ +o .--` /y:` +.
- | | yo`:. :o `+-
- | 1. Back to Main Menu [Backspace] | y/ -/` -o/
- | 2. Load System [D]efaults | .- ::/sy+:.
- | | / `-- /
- | Boot Options: | `: :`
- | 3. [A]CPI Support On | `: :`
- | 4. Safe [M]ode... off | / /
- | 5. [S]ingle User. off | .- -.
- | 6. [V]erbose..... On | -- -.
- | | `:` `:`
- | | .-- `--.
- | | .---.....----.
- +-----------------------------------------+
- /boot/kernel/kernel text=0x8b7e5d data=0x831f8+0x28f570 syms=[0x8+0xacd58+0x8+0xacb44]
- Booting...
- SMAP type=01 base=0000000000000000 len=000000000009fc00
- SMAP type=02 base=000000000009fc00 len=0000000000000400
- SMAP type=02 base=00000000000f0000 len=0000000000010000
- SMAP type=01 base=0000000000100000 len=000000007e04e000
- SMAP type=02 base=000000007e14e000 len=0000000000eb2000
- SMAP type=02 base=00000000f8000000 len=0000000001000000
- Table 'FACP' at 0x7e164ce8
- Table 'SPCR' at 0x7e164ddc
- Table 'HPET' at 0x7e164e30
- Table 'APIC' at 0x7e164e68
- APIC: Found table at 0x7e164e68
- APIC: Using the MADT enumerator.
- MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
- SMP: Added CPU 0 (AP)
- MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
- SMP: Added CPU 1 (AP)
- Copyright (c) 1992-2015 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 11.0-CURRENT #1 r277315M: Sun Jan 18 22:22:05 CET 2015
- [email protected]:/usr/obj/EINE.amd64/usr/local/BSDRP/EINE/FreeBSD/src/sys/amd64 amd64
- FreeBSD clang version 3.5.0 (tags/RELEASE_350/final 216957) 20141124
- VT: running with driver "vga".
- Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81125000.
- Calibrating TSC clock ... TSC clock: 1000032774 Hz
- CPU: AMD G-T40E Processor (1000.03-MHz K8-class CPU)
- Origin="AuthenticAMD" Id=0x500f20 Family=0x14 Model=0x2 Stepping=0
- Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
- Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
- AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
- AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
- SVM: Features=0x60f<NP,LbrVirt,SVML,NRIPS,<b9>,PauseFilter>
- Revision=1, ASIDs=8
- TSC: P-state invariant, performance statistics
- L1 2MB data TLB: 8 entries, fully associative
- L1 2MB instruction TLB: 8 entries, fully associative
- L1 4KB data TLB: 40 entries, fully associative
- L1 4KB instruction TLB: 0 entries, 0-way associative
- L1 data cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
- L1 instruction cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
- L2 2MB unified TLB: 0 entries, disabled/not present
- L2 4KB data TLB: 512 entries, 4-way associative
- L2 4KB instruction TLB: 512 entries, 4-way associative
- L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
- real memory = 2115297280 (2017 MB)
- Physical memory chunk(s):
- 0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages)
- 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
- 0x0000000001148000 - 0x000000007ad8dfff, 2042912768 bytes (498758 pages)
- avail memory = 2027372544 (1933 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <CORE COREBOOT>
- INTR: Adding local APIC 1 as a target
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- FreeBSD/SMP: 1 package(s) x 2 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- APIC: CPU 0 has ACPI ID 0
- APIC: CPU 1 has ACPI ID 1
- x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
- x86bios: SSEG 0x098000-0x098fff at 0xfffffe007a1f9000
- x86bios: EBDA 0x09f000-0x09ffff at 0xfffff8000009f000
- x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
- random device not loaded/active; using insecure pseudo-random number generator
- ULE: setup cpu 0
- ULE: setup cpu 1
- ACPI: RSDP 0x00000000000F2590 000014 (v00 CORE )
- ACPI: RSDT 0x000000007E162424 000044 (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: FACP 0x000000007E164CE8 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: DSDT 0x000000007E1624C8 0027DA (v02 PCENG COREBOOT 00010001 INTL 20121114)
- ACPI: FACS 0x000000007E164CA8 000040
- ACPI: SPCR 0x000000007E164DDC 000050 (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: HPET 0x000000007E164E30 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: APIC 0x000000007E164E68 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: HEST 0x000000007E164EC8 000198 (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: SSDT 0x000000007E165060 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
- ACPI: SSDT 0x000000007E1666F0 00030C (v01 AMD POWERNOW 00000001 AMD 00000001)
- ACPI: SSDT 0x000000007E166A00 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
- MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
- ioapic0: Routing external 8259A's -> intpin 0
- MADT: Interrupt override: source 0, irq 2
- ioapic0: Routing IRQ 0 -> intpin 2
- MADT: Interrupt override: source 9, irq 9
- ioapic0: intpin 9 trigger: level
- ioapic0: intpin 9 polarity: low
- ioapic0 <Version 2.1> irqs 0-23 on motherboard
- cpu0 BSP:
- ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000300ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- wlan: <802.11 Link Layer>
- random: entropy device infrastructure driver
- random: selecting highest priority adaptor <Dummy>
- mem: <memory>
- null: <full device, null device, zero device>
- random: SOFT: yarrow init()
- random: selecting highest priority adaptor <Yarrow>
- crypto: <crypto core>
- io: <I/O>
- vtvga0: <vt_vga driver> on motherboard
- cryptosoft0: <software crypto> on motherboard
- crypto: assign cryptosoft0 driver id 0, flags 100663296
- crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
- crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
- acpi0: <CORE COREBOOT> on motherboard
- ACPI: All ACPI Tables successfully acquired
- ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
- ACPI: Executed 2 blocks of module-level executable AML code
- acpi0: Power Button (fixed)
- cpu0: Processor \_PR_.C000 (ACPI ID 0) -> APIC ID 0
- cpu0: <ACPI CPU> on acpi0
- cpu1: Processor \_PR_.C001 (ACPI ID 1) -> APIC ID 1
- cpu1: <ACPI CPU> on acpi0
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
- ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
- Event timer "RTC" frequency 32768 Hz quality 0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 50
- Event timer "i8254" frequency 1193182 Hz quality 100
- ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- hpet0: vendor 0x4353, rev 0x10, 14318180Hz, 3 timers, legacy route
- hpet0: t0: irqs 0x00c00000 (0), MSI, periodic
- hpet0: t1: irqs 0x00c00000 (0), MSI, periodic
- hpet0: t2: irqs 0x00c00000 (0), MSI, periodic
- Timecounter "HPET" frequency 14318180 Hz quality 950
- msi: routing MSI-X IRQ 256 to local APIC 0 vector 51
- msi: routing MSI-X IRQ 257 to local APIC 0 vector 52
- msi: routing MSI-X IRQ 258 to local APIC 0 vector 53
- Event timer "HPET" frequency 14318180 Hz quality 550
- Event timer "HPET1" frequency 14318180 Hz quality 450
- pci_link0: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
- Validation 0 255 N 0 3 4 5 7 10 11 12 15
- After Disable 0 255 N 0 3 4 5 7 10 11 12 15
- pci_link1: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
- Validation 0 255 N 0 3 4 5 7 10 11 12 15
- After Disable 0 255 N 0 3 4 5 7 10 11 12 15
- pci_link2: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
- Validation 0 255 N 0 3 4 5 7 10 11 12 15
- After Disable 0 255 N 0 3 4 5 7 10 11 12 15
- pci_link3: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
- Validation 0 255 N 0 3 4 5 7 10 11 12 15
- After Disable 0 255 N 0 3 4 5 7 10 11 12 15
- pci_link4: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
- Validation 0 255 N 0 3 4 5 7 10 11 12 15
- After Disable 0 255 N 0 3 4 5 7 10 11 12 15
- pci_link5: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 9
- Validation 0 255 N 0 9
- After Disable 0 255 N 0 9
- pci_link6: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
- Validation 0 255 N 0 3 4 5 7 10 11 12 15
- After Disable 0 255 N 0 3 4 5 7 10 11 12 15
- pci_link7: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
- Validation 0 255 N 0 3 4 5 7 10 11 12 15
- After Disable 0 255 N 0 3 4 5 7 10 11 12 15
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pcib0: decoding 5 range 0-0xff
- pcib0: decoding 4 range 0-0xcf7
- pcib0: decoding 4 range 0xd00-0xffff
- pcib0: decoding 3 range 0x7f000000-0xffffffff
- pci0: <ACPI PCI bus> on pcib0
- pci0: domain=0, physical bus=0
- found-> vendor=0x1022, dev=0x1510, revid=0x00
- domain=0, bus=0, slot=0, func=0
- class=06-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x0220, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1022, dev=0x1512, revid=0x00
- domain=0, bus=0, slot=4, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- pcib0: matched entry for 0.4.INTA
- pcib0: slot 4 INTA hardwired to IRQ 16
- secbus=1, subbus=1
- found-> vendor=0x1022, dev=0x1513, revid=0x00
- domain=0, bus=0, slot=5, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- pcib0: matched entry for 0.5.INTA
- pcib0: slot 5 INTA hardwired to IRQ 17
- secbus=2, subbus=2
- found-> vendor=0x1022, dev=0x1514, revid=0x00
- domain=0, bus=0, slot=6, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- pcib0: matched entry for 0.6.INTA
- pcib0: slot 6 INTA hardwired to IRQ 18
- secbus=3, subbus=3
- found-> vendor=0x1002, dev=0x4391, revid=0x40
- domain=0, bus=0, slot=17, func=0
- class=01-06-01, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- map[10]: type I/O Port, range 32, base 0x4010, size 3, enabled
- pcib0: allocated type 4 (0x4010-0x4017) for rid 10 of pci0:0:17:0
- map[14]: type I/O Port, range 32, base 0x4020, size 2, enabled
- pcib0: allocated type 4 (0x4020-0x4023) for rid 14 of pci0:0:17:0
- map[18]: type I/O Port, range 32, base 0x4018, size 3, enabled
- pcib0: allocated type 4 (0x4018-0x401f) for rid 18 of pci0:0:17:0
- map[1c]: type I/O Port, range 32, base 0x4024, size 2, enabled
- pcib0: allocated type 4 (0x4024-0x4027) for rid 1c of pci0:0:17:0
- map[20]: type I/O Port, range 32, base 0x4000, size 4, enabled
- pcib0: allocated type 4 (0x4000-0x400f) for rid 20 of pci0:0:17:0
- map[24]: type Memory, range 32, base 0xf7f08000, size 10, enabled
- pcib0: allocated type 3 (0xf7f08000-0xf7f083ff) for rid 24 of pci0:0:17:0
- pcib0: matched entry for 0.17.INTA
- pcib0: slot 17 INTA hardwired to IRQ 19
- found-> vendor=0x1002, dev=0x4397, revid=0x00
- domain=0, bus=0, slot=18, func=0
- class=0c-03-10, hdrtype=0x00, mfdev=1
- cmdreg=0x0006, statreg=0x02a0, cachelnsz=16 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- map[10]: type Memory, range 32, base 0xf7f04000, size 12, enabled
- pcib0: allocated type 3 (0xf7f04000-0xf7f04fff) for rid 10 of pci0:0:18:0
- pcib0: matched entry for 0.18.INTA
- pcib0: slot 18 INTA hardwired to IRQ 18
- found-> vendor=0x1002, dev=0x4396, revid=0x00
- domain=0, bus=0, slot=18, func=2
- class=0c-03-20, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=b, irq=11
- powerspec 2 supports D0 D1 D2 D3 current D0
- map[10]: type Memory, range 32, base 0xf7f08400, size 8, enabled
- pcib0: allocated type 3 (0xf7f08400-0xf7f084ff) for rid 10 of pci0:0:18:2
- pcib0: matched entry for 0.18.INTB
- pcib0: slot 18 INTB hardwired to IRQ 17
- found-> vendor=0x1002, dev=0x4397, revid=0x00
- domain=0, bus=0, slot=19, func=0
- class=0c-03-10, hdrtype=0x00, mfdev=1
- cmdreg=0x0006, statreg=0x02a0, cachelnsz=16 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- map[10]: type Memory, range 32, base 0xf7f05000, size 12, enabled
- pcib0: allocated type 3 (0xf7f05000-0xf7f05fff) for rid 10 of pci0:0:19:0
- pcib0: matched entry for 0.19.INTA
- pcib0: slot 19 INTA hardwired to IRQ 18
- found-> vendor=0x1002, dev=0x4396, revid=0x00
- domain=0, bus=0, slot=19, func=2
- class=0c-03-20, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=b, irq=11
- powerspec 2 supports D0 D1 D2 D3 current D0
- map[10]: type Memory, range 32, base 0xf7f08500, size 8, enabled
- pcib0: allocated type 3 (0xf7f08500-0xf7f085ff) for rid 10 of pci0:0:19:2
- pcib0: matched entry for 0.19.INTB
- pcib0: slot 19 INTB hardwired to IRQ 17
- found-> vendor=0x1002, dev=0x4385, revid=0x42
- domain=0, bus=0, slot=20, func=0
- class=0c-05-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1002, dev=0x439d, revid=0x40
- domain=0, bus=0, slot=20, func=3
- class=06-01-00, hdrtype=0x00, mfdev=1
- cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1002, dev=0x4384, revid=0x40
- domain=0, bus=0, slot=20, func=4
- class=06-04-01, hdrtype=0x01, mfdev=1
- cmdreg=0x0023, statreg=0x02a0, cachelnsz=0 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
- secbus=4, subbus=4
- found-> vendor=0x1002, dev=0x4399, revid=0x00
- domain=0, bus=0, slot=20, func=5
- class=0c-03-10, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x02a0, cachelnsz=16 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=c, irq=10
- map[10]: type Memory, range 32, base 0xf7f06000, size 12, enabled
- pcib0: allocated type 3 (0xf7f06000-0xf7f06fff) for rid 10 of pci0:0:20:5
- pcib0: matched entry for 0.20.INTC
- pcib0: slot 20 INTC hardwired to IRQ 18
- found-> vendor=0x1002, dev=0x43a0, revid=0x00
- domain=0, bus=0, slot=21, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=255
- powerspec 3 supports D0 D1 D2 D3 current D0
- MSI supports 1 message, 64 bit
- secbus=5, subbus=5
- found-> vendor=0x1002, dev=0x4397, revid=0x00
- domain=0, bus=0, slot=22, func=0
- class=0c-03-10, hdrtype=0x00, mfdev=1
- cmdreg=0x0006, statreg=0x02a0, cachelnsz=16 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=255
- map[10]: type Memory, range 32, base 0xf7f07000, size 12, enabled
- pcib0: allocated type 3 (0xf7f07000-0xf7f07fff) for rid 10 of pci0:0:22:0
- found-> vendor=0x1002, dev=0x4396, revid=0x00
- domain=0, bus=0, slot=22, func=2
- class=0c-03-20, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=b, irq=255
- powerspec 2 supports D0 D1 D2 D3 current D0
- map[10]: type Memory, range 32, base 0xf7f08600, size 8, enabled
- pcib0: allocated type 3 (0xf7f08600-0xf7f086ff) for rid 10 of pci0:0:22:2
- found-> vendor=0x1022, dev=0x1700, revid=0x43
- domain=0, bus=0, slot=24, func=0
- class=06-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1022, dev=0x1701, revid=0x00
- domain=0, bus=0, slot=24, func=1
- class=06-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1022, dev=0x1702, revid=0x00
- domain=0, bus=0, slot=24, func=2
- class=06-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1022, dev=0x1703, revid=0x00
- domain=0, bus=0, slot=24, func=3
- class=06-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1022, dev=0x1704, revid=0x00
- domain=0, bus=0, slot=24, func=4
- class=06-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1022, dev=0x1718, revid=0x00
- domain=0, bus=0, slot=24, func=5
- class=06-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1022, dev=0x1716, revid=0x00
- domain=0, bus=0, slot=24, func=6
- class=06-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x1022, dev=0x1719, revid=0x00
- domain=0, bus=0, slot=24, func=7
- class=06-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
- pcib0: allocated type 4 (0x1000-0x1fff) for rid 1c of pcib1
- pcib0: allocated type 3 (0xf7900000-0xf79fffff) for rid 20 of pcib1
- pcib0: allocated type 3 (0xf7800000-0xf78fffff) for rid 24 of pcib1
- pcib1: domain 0
- pcib1: secondary bus 1
- pcib1: subordinate bus 1
- pcib1: I/O decode 0x1000-0x1fff
- pcib1: memory decode 0xf7900000-0xf79fffff
- pcib1: prefetched decode 0xf7800000-0xf78fffff
- pci1: <ACPI PCI bus> on pcib1
- pcib1: allocated bus range (1-1) for rid 0 of pci1
- pci1: domain=0, physical bus=1
- found-> vendor=0x10ec, dev=0x8168, revid=0x06
- domain=0, bus=1, slot=0, func=0
- class=02-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D1 D2 D3 current D0
- MSI supports 1 message, 64 bit
- MSI-X supports 4 messages in map 0x20
- map[10]: type I/O Port, range 32, base 0x1000, size 8, enabled
- pcib1: allocated I/O port range (0x1000-0x10ff) for rid 10 of pci0:1:0:0
- map[18]: type Memory, range 64, base 0xf7900000, size 12, enabled
- pcib1: allocated memory range (0xf7900000-0xf7900fff) for rid 18 of pci0:1:0:0
- map[20]: type Prefetchable Memory, range 64, base 0xf7800000, size 14, enabled
- pcib1: allocated prefetch range (0xf7800000-0xf7803fff) for rid 20 of pci0:1:0:0
- pcib1: matched entry for 1.0.INTA
- pcib1: slot 0 INTA hardwired to IRQ 16
- re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0xf7900000-0xf7900fff,0xf7800000-0xf7803fff irq 16 at device 0.0 on pci1
- re0: MSI count : 1
- re0: MSI-X count : 4
- re0: attempting to allocate 1 MSI-X vectors (4 supported)
- msi: routing MSI-X IRQ 259 to local APIC 0 vector 54
- re0: using IRQ 259 for MSI-X
- re0: Using 1 MSI-X message
- re0: ASPM disabled
- re0: Chip rev. 0x2c000000
- re0: MAC rev. 0x00200000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
- rgephy0: OUI 0x00e04c, model 0x0011, rev. 4
- rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Using defaults for TSO: 65518/35/2048
- re0: bpf attached
- re0: Ethernet address: 00:0d:b9:35:37:dc
- pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
- pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib2
- pcib0: allocated type 3 (0xf7b00000-0xf7bfffff) for rid 20 of pcib2
- pcib0: allocated type 3 (0xf7a00000-0xf7afffff) for rid 24 of pcib2
- pcib2: domain 0
- pcib2: secondary bus 2
- pcib2: subordinate bus 2
- pcib2: I/O decode 0x2000-0x2fff
- pcib2: memory decode 0xf7b00000-0xf7bfffff
- pcib2: prefetched decode 0xf7a00000-0xf7afffff
- pci2: <ACPI PCI bus> on pcib2
- pcib2: allocated bus range (2-2) for rid 0 of pci2
- pci2: domain=0, physical bus=2
- found-> vendor=0x10ec, dev=0x8168, revid=0x06
- domain=0, bus=2, slot=0, func=0
- class=02-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D1 D2 D3 current D0
- MSI supports 1 message, 64 bit
- MSI-X supports 4 messages in map 0x20
- map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled
- pcib2: allocated I/O port range (0x2000-0x20ff) for rid 10 of pci0:2:0:0
- map[18]: type Memory, range 64, base 0xf7b00000, size 12, enabled
- pcib2: allocated memory range (0xf7b00000-0xf7b00fff) for rid 18 of pci0:2:0:0
- map[20]: type Prefetchable Memory, range 64, base 0xf7a00000, size 14, enabled
- pcib2: allocated prefetch range (0xf7a00000-0xf7a03fff) for rid 20 of pci0:2:0:0
- pcib2: matched entry for 2.0.INTA
- pcib2: slot 0 INTA hardwired to IRQ 17
- re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7b00000-0xf7b00fff,0xf7a00000-0xf7a03fff irq 17 at device 0.0 on pci2
- re1: MSI count : 1
- re1: MSI-X count : 4
- re1: attempting to allocate 1 MSI-X vectors (4 supported)
- msi: routing MSI-X IRQ 260 to local APIC 0 vector 55
- re1: using IRQ 260 for MSI-X
- re1: Using 1 MSI-X message
- re1: ASPM disabled
- re1: Chip rev. 0x2c000000
- re1: MAC rev. 0x00200000
- miibus1: <MII bus> on re1
- rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
- rgephy1: OUI 0x00e04c, model 0x0011, rev. 4
- rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re1: Using defaults for TSO: 65518/35/2048
- re1: bpf attached
- re1: Ethernet address: 00:0d:b9:35:37:dd
- pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
- pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib3
- pcib0: allocated type 3 (0xf7d00000-0xf7dfffff) for rid 20 of pcib3
- pcib0: allocated type 3 (0xf7c00000-0xf7cfffff) for rid 24 of pcib3
- pcib3: domain 0
- pcib3: secondary bus 3
- pcib3: subordinate bus 3
- pcib3: I/O decode 0x3000-0x3fff
- pcib3: memory decode 0xf7d00000-0xf7dfffff
- pcib3: prefetched decode 0xf7c00000-0xf7cfffff
- pci3: <ACPI PCI bus> on pcib3
- pcib3: allocated bus range (3-3) for rid 0 of pci3
- pci3: domain=0, physical bus=3
- found-> vendor=0x10ec, dev=0x8168, revid=0x06
- domain=0, bus=3, slot=0, func=0
- class=02-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D1 D2 D3 current D0
- MSI supports 1 message, 64 bit
- MSI-X supports 4 messages in map 0x20
- map[10]: type I/O Port, range 32, base 0x3000, size 8, enabled
- pcib3: allocated I/O port range (0x3000-0x30ff) for rid 10 of pci0:3:0:0
- map[18]: type Memory, range 64, base 0xf7d00000, size 12, enabled
- pcib3: allocated memory range (0xf7d00000-0xf7d00fff) for rid 18 of pci0:3:0:0
- map[20]: type Prefetchable Memory, range 64, base 0xf7c00000, size 14, enabled
- pcib3: allocated prefetch range (0xf7c00000-0xf7c03fff) for rid 20 of pci0:3:0:0
- pcib3: matched entry for 3.0.INTA
- pcib3: slot 0 INTA hardwired to IRQ 18
- re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7d00000-0xf7d00fff,0xf7c00000-0xf7c03fff irq 18 at device 0.0 on pci3
- re2: MSI count : 1
- re2: MSI-X count : 4
- re2: attempting to allocate 1 MSI-X vectors (4 supported)
- msi: routing MSI-X IRQ 261 to local APIC 0 vector 56
- re2: using IRQ 261 for MSI-X
- re2: Using 1 MSI-X message
- re2: ASPM disabled
- re2: Chip rev. 0x2c000000
- re2: MAC rev. 0x00200000
- miibus2: <MII bus> on re2
- rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
- rgephy2: OUI 0x00e04c, model 0x0011, rev. 4
- rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re2: Using defaults for TSO: 65518/35/2048
- re2: bpf attached
- re2: Ethernet address: 00:0d:b9:35:37:de
- ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f08000-0xf7f083ff irq 19 at device 17.0 on pci0
- ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 57
- ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
- ahci0: quirks=0x2000<ATI_PMP_BUG>
- ahci0: Caps: 64bit NCQ SNTF MPS AL CLO 6Gbps PM PMD SSC PSC 32cmd 6ports
- ahci0: Caps2:
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich0: Caps:
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich1: Caps:
- ahcich2: <AHCI channel> at channel 2 on ahci0
- ahcich2: Caps:
- ahcich3: <AHCI channel> at channel 3 on ahci0
- ahcich3: Caps:
- ahcich4: <AHCI channel> at channel 4 on ahci0
- ahcich4: Caps:
- ahcich5: <AHCI channel> at channel 5 on ahci0
- ahcich5: Caps:
- ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f04000-0xf7f04fff irq 18 at device 18.0 on pci0
- ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 58
- usbus0 on ohci0
- ohci0: usbpf: Attached
- ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f08400-0xf7f084ff irq 17 at device 18.2 on pci0
- ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 59
- ehci0: Dropped interrupts workaround enabled
- usbus1: EHCI version 1.0
- usbus1 on ehci0
- ehci0: usbpf: Attached
- ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f05000-0xf7f05fff irq 18 at device 19.0 on pci0
- usbus2 on ohci1
- ohci1: usbpf: Attached
- ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f08500-0xf7f085ff irq 17 at device 19.2 on pci0
- ehci1: Dropped interrupts workaround enabled
- usbus3: EHCI version 1.0
- usbus3 on ehci1
- ehci1: usbpf: Attached
- pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
- isab0: <PCI-ISA bridge> at device 20.3 on pci0
- isa0: <ISA bus> on isab0
- pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
- pcib4: domain 0
- pcib4: secondary bus 4
- pcib4: subordinate bus 4
- pcib4: special decode subtractive
- pcib4: could not get PCI interrupt routing table for \_SB_.PCI0.HPBR - AE_NOT_FOUND
- pci4: <ACPI PCI bus> on pcib4
- pcib4: allocated bus range (4-4) for rid 0 of pci4
- pci4: domain=0, physical bus=4
- ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f06000-0xf7f06fff irq 18 at device 20.5 on pci0
- usbus4 on ohci2
- ohci2: usbpf: Attached
- pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
- pcib0: allocated type 3 (0xf7e00000-0xf7efffff) for rid 20 of pcib5
- pcib5: domain 0
- pcib5: secondary bus 5
- pcib5: subordinate bus 5
- pcib5: memory decode 0xf7e00000-0xf7efffff
- pci5: <ACPI PCI bus> on pcib5
- pcib5: allocated bus range (5-5) for rid 0 of pci5
- pci5: domain=0, physical bus=5
- found-> vendor=0x168c, dev=0x002a, revid=0x01
- domain=0, bus=5, slot=0, func=0
- class=02-80-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=255
- powerspec 2 supports D0 D1 D3 current D0
- MSI supports 1 message
- MSI-X supports 1 message in map 0x10
- map[10]: type Memory, range 64, base 0, size 16, memory disabled
- ath0: <Atheros 9280> at device 0.0 on pci5
- pcib5: allocated memory range (0xf7e00000-0xf7e0ffff) for rid 10 of ath0
- ath0: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xf7e00000
- pcib5: matched entry for 5.0.INTA
- pcib5: slot 0 INTA hardwired to IRQ 16
- ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 60
- ath0: [HT] enabling HT modes
- ath0: [HT] 1 stream STBC receive enabled
- ath0: [HT] 1 stream STBC transmit enabled
- ath0: [HT] 2 RX streams; 2 TX streams
- ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
- ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- ath0: 2T2R
- ath0: 11na MCS 20MHz
- ath0: MCS 0-7: 6.5Mbps - 65Mbps
- ath0: MCS 8-15: 13Mbps - 130Mbps
- ath0: 11na MCS 40MHz:
- ath0: MCS 0-7: 13.5Mbps - 135Mbps
- ath0: MCS 8-15: 27Mbps - 270Mbps
- ath0: 11na MCS 40MHz SGI:
- ath0: MCS 0-7: 15Mbps - 150Mbps
- ath0: MCS 8-15: 30Mbps - 300Mbps
- ath0: 11ng MCS 20MHz
- ath0: MCS 0-7: 6.5Mbps - 65Mbps
- ath0: MCS 8-15: 13Mbps - 130Mbps
- ath0: 11ng MCS 40MHz:
- ath0: MCS 0-7: 13.5Mbps - 135Mbps
- ath0: MCS 8-15: 27Mbps - 270Mbps
- ath0: 11ng MCS 40MHz SGI:
- ath0: MCS 0-7: 15Mbps - 150Mbps
- ath0: MCS 8-15: 30Mbps - 300Mbps
- ath0: AR9280 mac 128.2 RF5133 phy 13.0
- ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
- ath0: Use hw queue 1 for WME_AC_BE traffic
- ath0: Use hw queue 0 for WME_AC_BK traffic
- ath0: Use hw queue 2 for WME_AC_VI traffic
- ath0: Use hw queue 3 for WME_AC_VO traffic
- ath0: Use hw queue 8 for CAB traffic
- ath0: Use hw queue 9 for beacons
- ath0: using multicast key search
- ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f07000-0xf7f07fff at device 22.0 on pci0
- pcib0: matched entry for 0.22.INTA
- pcib0: slot 22 INTA hardwired to IRQ 18
- usbus5 on ohci3
- ohci3: usbpf: Attached
- ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xf7f08600-0xf7f086ff at device 22.2 on pci0
- pcib0: matched entry for 0.22.INTB
- pcib0: slot 22 INTB hardwired to IRQ 17
- ehci2: Dropped interrupts workaround enabled
- usbus6: EHCI version 1.0
- usbus6 on ehci2
- ehci2: usbpf: Attached
- acpi_button0: <Power Button> on acpi0
- ACPI: Enabled 6 GPEs in block 00 to 1F
- acpi0: wakeup code va 0xfffffe0095ffb000 pa 0x90000
- isa_probe_children: disabling PnP devices
- atrtc: atrtc0 already exists; skipping it
- attimer: attimer0 already exists; skipping it
- isa_probe_children: probing non-PnP devices
- orm0: <ISA Option ROM> at iomem 0xee800-0xeffff on isa0
- pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
- pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
- atkbdc0: AT keyboard controller not found
- atkbdc0 failed to probe at port 0x60,0x64 on isa0
- fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
- ppc0 failed to probe at irq 7 on isa0
- sc0 failed to probe on isa0
- pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
- pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
- uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
- pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
- uart0: console (115200,n,8,1)
- ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 61
- uart0: fast interrupt
- pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
- pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
- uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
- pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
- ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 62
- uart1: fast interrupt
- wbwd0 failed to probe on isa0
- isa_probe_children: probing PnP devices
- Device configuration finished.
- usbus0: 12Mbps Full Speed USB v1.0
- procfs registered
- Timecounters tick every 1.000 msec
- vlan: initialized, using hash tables with chaining
- crypto: <crypto device>
- tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
- lo0: bpf attached
- usbus1: 480Mbps High Speed USB v2.0
- ugen0.1: <ATI> at usbus0
- uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <ATI> at usbus1
- uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- usbus2: 12Mbps Full Speed USB v1.0
- usbus3: 480Mbps High Speed USB v2.0
- ugen2.1: <ATI> at usbus2
- uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
- ugen3.1: <ATI> at usbus3
- uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
- usbus4: 12Mbps Full Speed USB v1.0
- usbus5: 12Mbps Full Speed USB v1.0
- ugen4.1: <ATI> at usbus4
- uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
- ugen5.1: <ATI> at usbus5
- uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
- usbus6: 480Mbps High Speed USB v2.0
- ahcich0: AHCI reset...
- ugen6.1: <ATI> at usbus6
- uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
- ahcich0: SATA connect time=100us status=00000133
- ahcich0: AHCI reset: device found
- ahcich0: AHCI reset: device ready after 0ms
- ahcich1: AHCI reset...
- ahcich1: SATA connect timeout time=10000us status=00000000
- ahcich1: AHCI reset: device not found
- ahcich2: AHCI reset...
- uhub0: 5 ports with 5 removable, self powered
- uhub4: 2 ports with 2 removable, self powered
- uhub2: 5 ports with 5 removable, self powered
- ahcich2: SATA connect timeout time=10000us status=00000000
- ahcich2: AHCI reset: device not found
- ahcich3: AHCI reset...
- ahcich3: SATA connect timeout time=10000us status=00000000
- uhub5: 4 ports with 4 removable, self powered
- ahcich3: AHCI reset: device not found
- ahcich4: AHCI reset...
- ahcich4: SATA connect timeout time=10000us status=00000000
- ahcich4: AHCI reset: device not found
- ahcich5: AHCI reset...
- ahcich5: SATA connect timeout time=10000us status=00000000
- ahcich5: AHCI reset: device not found
- pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
- pass0: <SATA SSD S9FM01.9> ATA-10 SATA 3.x device
- pass0: Serial Number FF1A074A0F0800757069
- pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- pass0: Command Queueing enabled
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <SATA SSD S9FM01.9> ATA-10 SATA 3.x device
- ada0: Serial Number FF1A074A0F0800757069
- ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 15272MB (31277232 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad4
- GEOM: new disk ada0
- random: unblocking device.
- SMP: AP CPU #1 Launched!
- cpu1 AP:
- ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48
- ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 49
- ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50
- ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51
- msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 52
- msi: Assigning MSI-X IRQ 260 to local APIC 1 vector 53
- SMP: passed TSC synchronization test
- Timecounter "TSC" frequency 1000032774 Hz quality 800
- Root mount waiting for: usbus6 usbus3 usbus1
- Root mount waiting for: usbus6 usbus3 usbus1
- uhub6: 4 ports with 4 removable, self powered
- uhub1: 5 ports with 5 removable, self powered
- uhub3: 5 ports with 5 removable, self powered
- ugen6.2: <Generic> at usbus6
- umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 2> on usbus6
- umass0: SCSI over Bulk-Only; quirks = 0x4001
- umass0:6:0: Attached to scbus6
- Trying to mount root from ufs:/dev/ufs/EINEs2a [ro]...
- pass1 at umass-sim0 bus 0 scbus6 target 0 lun 0
- pass1: <Multiple Card Reader 1.00> Removable Direct Access SCSI-4 device
- GEOM: new disk da0
- pass1: Serial Number 058F63666485
- pass1: 40.000MB/s transfers
- start_init: trying /sbin/init
- da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
- da0: <Multiple Card Reader 1.00> Removable Direct Access SCSI-4 device
- da0: Serial Number 058F63666485
- da0: 40.000MB/s transfers
- da0: Attempt to query device size failed: NOT READY, Medium not present
- da0: quirks=0x2<NO_6_BYTE>
- da0: Delete methods: <NONE(*)>
- (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL not supported.
- Setting hostuuid: 05df8158-4e0a-11e4-ac86-000db93537dc.
- Setting hostid: 0x13682156.
- Starting file system checks:
- /dev/ufs/EINEs2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
- /dev/ufs/EINEs2a: clean, 502311 free (1727 frags, 62573 blocks, 0.2% fragmentation)
- /dev/ufs/EINEs4: FILE SYSTEM CLEAN; SKIPPING CHECKS
- /dev/ufs/EINEs3: FILE SYSTEM CLEAN; SKIPPING CHECKS
- /dev/ufs/EINEs4: clean, 3512449 free (33 frags, 439052 blocks, 0.0% fragmentation)
- /dev/ufs/EINEs3: clean, 31114 free (26 frags, 3886 blocks, 0.1% fragmentation)
- Mounting local file systems:.
- Loading kernel modules:
- pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
- pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
- atkbdc0: AT keyboard controller not found
- pcib0: allocated type 4 (0xcd6-0xcd7) for rid 0 of apuled0
- apuled0: MMIO base adddress is 0xfed80000
- apuled0 at iomem 0xfed801bb-0xfed801be on isa0
- pcib0: allocated type 3 (0xfed801bb-0xfed801be) for rid 0 of apuled0
- apuled0: created
- Setting hostname: manager.
- Additional TCP/IP options: IPv6 CPE WANIF=re0.
- Feeding entropy:eval: cannot create /entropy: Read-only file system
- re0: link state changed to DOWN
- Starting Network: lo0 re0 re1 re2.
- lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
- options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
- inet6 ::1 prefixlen re1: link state changed to DOWN
- 128
- inet6 fe80::1%lo0 prefixlen 64 scopeid 0xre2: link state changed to DOWN
- 5
- inet 127.0.0.1 netmask 0xff000000
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- groups: lo
- re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
- ether 00:0d:b9:35:37:dc
- inet 10.237.175.233 netmask 0xfffffc00 broadcast 10.237.175.255
- inet6 fe80::20d:b9ff:fe35:37dc%re0 prefixlen 64 scopeid 0x1
- nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
- media: Ethernet autoselect (none)
- status: no carrier
- re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
- ether 00:0d:b9:35:37:dd
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- media: Ethernet autoselect (10baseT/UTP <half-duplex>)
- status: no carrier
- re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
- ether 00:0d:b9:35:37:de
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- media: Ethernet autoselect (10baseT/UTP <half-duplex>)
- status: no carrier
- Starting devd.
- Starting Network: re1.
- re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
- ether 00:0d:b9:35:37:dd
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- media: Ethernet autoselect (10baseT/UTP <half-duplex>)
- status: no carrier
- Starting Network: re2.
- re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
- options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
- ether 00:0d:b9:35:37:de
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- media: Ethernet autoselect (10baseT/UTP <half-duplex>)
- status: no carrier
- Starting pflogd:
- add net default: gateway 10.237.175.254 fib 0
- add net fe80::: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- add net ff02::: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- add net ::ffff:0.0.0.0: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- add net ::0.0.0.0: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
- Flushed all rules.
- 00100 allow ip from any to any via lo0
- 00200 deny ip from any to 127.0.0.0/8
- 00300 deny ip from 127.0.0.0/8 to any
- 00400 deny ip from any to ::1
- 00500 deny ip from ::1 to any
- 00600 allow ipv6-icmp from :: to ff02::/16
- 00700 allow ipv6-icmp from fe80::/10 to fe80::/10
- 00800 allow ipv6-icmp from fe80::/10 to ff02::/16
- 00900 allow ipv6-icmp from any to any ip6 icmp6types 1
- 01000 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136
- 01100 check-state
- 01200 allow tcp from me to any established
- 01300 allow tcp from me to any setup keep-state
- 01400 allow udp from me to any keep-state
- 01500 allow icmp from me to any keep-state
- 01600 allow ipv6-icmp from me to any keep-state
- 01700 allow udp from 0.0.0.0 68 to 255.255.255.255 dst-port 67 out
- 01800 allow udp from any 67 to me dst-port 68 in
- 01900 allow udp from any 67 to 255.255.255.255 dst-port 68 in
- 02000 allow udp from fe80::/10 to me dst-port 546 in
- 02100 allow icmp from any to any icmptypes 8
- 02200 allow ipv6-icmp from any to any ip6 icmp6types 128,129
- 02300 allow icmp from any to any icmptypes 3,4,11
- 02400 allow ipv6-icmp from any to any ip6 icmp6types 3
- 02500 allow tcp from any to me dst-port 666
- 65000 count ip from any to any
- 65100 deny { tcp or udp } from any to any dst-port 135-139,445 in
- 65200 deny { tcp or udp } from any to any dst-port 1026,1027 in
- 65300 deny { tcp or udp } from any to any dst-port 1433,1434 in
- 65400 deny ip from any to 255.255.255.255
- 65500 deny ip from any to 224.0.0.0/24 in
- 65500 deny udp from any to any dst-port 520 in
- 65500 deny tcp from any 80,443 to any dst-port 1024-65535 in
- 65500 deny ip from any to any
- Firewall rules loaded.
- ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/freeradius-3.0.6
- 32-bit compatibility ldconfig path:
- Creating and/or trimming log files.
- Starting syslogd.
- Starting casperd.
- Clearing /tmp (X related).
- Mounting late file systems:.
- Try to disable tso and lro for: re0...done
- Try to disable tso and lro for: re1...done
- Try to disable tso and lro for: re2...done
- Try to disable tso and lro for: ath0...ifconfig: -tso4: Invalid argument
- failed
- Performing sanity check on sshd configuration.
- Starting sshd.
- Starting cron.
- cron: tabs: No such file or directory
- cron: tabs: created
- Starting background file system checks in 60 seconds.
- Tue Apr 7 16:37:16 UTC 2015
- FreeBSD/amd64 (manager) (ttyu0)
- login:
- [user@manager]~> uname -a
- FreeBSD manager 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r277315M: Sun Jan 18 22:22:05 CET 2015 [email protected]:/usr/obj/EINE.amd64/usr/local/BSDRP/EINE/FreeBSD/src/sys/amd64 amd64
Advertisement
Add Comment
Please, Sign In to add comment