API tools faq
paste
Advertisement
GeorgeIoak

Raspberry Pi Boot Kernel Messages

GeorgeIoak
Jan 18th, 2018
555
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.16 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.9.70-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1068 SMP Mon Dec 18 22:12:55 GMT 2017
  3. [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  4. [ 0.000000] CPU: div instructions available: patching division code
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
  7. [ 0.000000] cma: Reserved 8 MiB at 0x3b800000
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] On node 0 totalpages: 245760
  10. [ 0.000000] free_area_init_node: node 0, pgdat 80c6f400, node_mem_map baf86000
  11. [ 0.000000] Normal zone: 2160 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 245760 pages, LIFO batch:31
  14. [ 0.000000] percpu: Embedded 14 pages/cpu @baf3f000 s25600 r8192 d23552 u57344
  15. [ 0.000000] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
  16. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  17. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243600
  18. [ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty3 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait consoleblank=0 loglevel=1 logo.nologo quiet splash
  19. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  20. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  21. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. [ 0.000000] Memory: 952540K/983040K available (7168K kernel code, 486K rwdata, 2012K rodata, 1024K init, 770K bss, 22308K reserved, 8192K cma-reserved)
  23. [ 0.000000] Virtual kernel memory layout:
  24. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  25. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  26. vmalloc : 0xbc800000 - 0xff800000 (1072 MB)
  27. lowmem : 0x80000000 - 0xbc000000 ( 960 MB)
  28. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  29. .text : 0x80008000 - 0x80800000 (8160 kB)
  30. .init : 0x80b00000 - 0x80c00000 (1024 kB)
  31. .data : 0x80c00000 - 0x80c798bc ( 487 kB)
  32. .bss : 0x80c7b000 - 0x80d3b9a4 ( 771 kB)
  33. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  34. [ 0.000000] Hierarchical RCU implementation.
  35. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  36. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  37. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
  38. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  39. [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  40. [ 0.000018] Switching to timer-based delay loop, resolution 52ns
  41. [ 0.000292] Console: colour dummy device 80x30
  42. [ 0.000308] console [tty3] enabled
  43. [ 0.000331] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  44. [ 0.000346] pid_max: default: 32768 minimum: 301
  45. [ 0.000655] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  46. [ 0.000664] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  47. [ 0.001670] Disabling memory control group subsystem
  48. [ 0.001741] CPU: Testing write buffer coherency: ok
  49. [ 0.001776] ftrace: allocating 22400 entries in 66 pages
  50. [ 0.048200] CPU0: update cpu_capacity 1024
  51. [ 0.048215] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  52. [ 0.048251] Setting up static identity map for 0x100000 - 0x100034
  53. [ 0.050136] CPU1: update cpu_capacity 1024
  54. [ 0.050143] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  55. [ 0.050832] CPU2: update cpu_capacity 1024
  56. [ 0.050838] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  57. [ 0.051512] CPU3: update cpu_capacity 1024
  58. [ 0.051518] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  59. [ 0.051608] Brought up 4 CPUs
  60. [ 0.051618] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  61. [ 0.051622] CPU: All CPU(s) started in HYP mode.
  62. [ 0.051626] CPU: Virtualization extensions available.
  63. [ 0.052420] devtmpfs: initialized
  64. [ 0.064348] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  65. [ 0.064629] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  66. [ 0.064646] futex hash table entries: 1024 (order: 4, 65536 bytes)
  67. [ 0.065186] pinctrl core: initialized pinctrl subsystem
  68. [ 0.066103] NET: Registered protocol family 16
  69. [ 0.068404] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  70. [ 0.077387] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  71. [ 0.077393] hw-breakpoint: maximum watchpoint size is 8 bytes.
  72. [ 0.077548] Serial: AMBA PL011 UART driver
  73. [ 0.080212] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  74. [ 0.080764] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  75. [ 0.081087] irq: no irq domain found for /soc/aux@0x7e215000 !
  76. [ 0.149047] bcm2835-dma 3f007000.dma: DMA legacy API manager at bc80f000, dmachans=0x1
  77. [ 0.150928] SCSI subsystem initialized
  78. [ 0.151084] usbcore: registered new interface driver usbfs
  79. [ 0.151162] usbcore: registered new interface driver hub
  80. [ 0.151253] usbcore: registered new device driver usb
  81. [ 0.157993] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-12-01 16:16
  82. [ 0.159451] clocksource: Switched to clocksource arch_sys_counter
  83. [ 0.206035] VFS: Disk quotas dquot_6.6.0
  84. [ 0.206113] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  85. [ 0.206331] FS-Cache: Loaded
  86. [ 0.206584] CacheFiles: Loaded
  87. [ 0.218730] NET: Registered protocol family 2
  88. [ 0.219648] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  89. [ 0.219756] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  90. [ 0.219940] TCP: Hash tables configured (established 8192 bind 8192)
  91. [ 0.220028] UDP hash table entries: 512 (order: 2, 16384 bytes)
  92. [ 0.220070] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  93. [ 0.220275] NET: Registered protocol family 1
  94. [ 0.220683] RPC: Registered named UNIX socket transport module.
  95. [ 0.220688] RPC: Registered udp transport module.
  96. [ 0.220692] RPC: Registered tcp transport module.
  97. [ 0.220697] RPC: Registered tcp NFSv4.1 backchannel transport module.
  98. [ 0.221766] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  99. [ 0.224115] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  100. [ 0.240337] FS-Cache: Netfs 'nfs' registered for caching
  101. [ 0.241335] NFS: Registering the id_resolver key type
  102. [ 0.241363] Key type id_resolver registered
  103. [ 0.241368] Key type id_legacy registered
  104. [ 0.243661] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  105. [ 0.243767] io scheduler noop registered
  106. [ 0.243773] io scheduler deadline registered (default)
  107. [ 0.244036] io scheduler cfq registered
  108. [ 0.249882] BCM2708FB: allocated DMA memory fb910000
  109. [ 0.249904] BCM2708FB: allocated DMA channel 0 @ bc80f000
  110. [ 0.261586] Console: switching to colour frame buffer device 100x30
  111. [ 0.269015] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  112. [ 0.270703] bcm2835-aux-uart 3f215040.serial: could not get clk: -517
  113. [ 0.272006] bcm2835-rng 3f104000.rng: hwrng registered
  114. [ 0.272124] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  115. [ 0.272664] vc-sm: Videocore shared memory driver
  116. [ 0.287548] brd: module loaded
  117. [ 0.296517] loop: module loaded
  118. [ 0.296528] Loading iSCSI transport class v2.0-870.
  119. [ 0.297074] usbcore: registered new interface driver smsc95xx
  120. [ 0.297089] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  121. [ 0.525160] Core Release: 2.80a
  122. [ 0.525169] Setting default values for core params
  123. [ 0.525197] Finished setting default values for core params
  124. [ 0.725566] Using Buffer DMA mode
  125. [ 0.725572] Periodic Transfer Interrupt Enhancement - disabled
  126. [ 0.725576] Multiprocessor Interrupt Enhancement - disabled
  127. [ 0.725582] OTG VER PARAM: 0, OTG VER FLAG: 0
  128. [ 0.725596] Dedicated Tx FIFOs mode
  129. [ 0.725930] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xbb904000 dma = 0xfb904000 len=9024
  130. [ 0.725954] FIQ FSM acceleration enabled for :
  131. Non-periodic Split Transactions
  132. Periodic Split Transactions
  133. High-Speed Isochronous Endpoints
  134. Interrupt/Control Split Transaction hack enabled
  135. [ 0.725961] dwc_otg: Microframe scheduler enabled
  136. [ 0.726008] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80590aa0
  137. [ 0.726018] WARN::hcd_init_fiq:460: FIQ ASM at 0x80590e10 length 36
  138. [ 0.726028] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbc87a000
  139. [ 0.726088] dwc_otg 3f980000.usb: DWC OTG Controller
  140. [ 0.726122] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  141. [ 0.726152] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  142. [ 0.726198] Init: Port Power? op_state=1
  143. [ 0.726202] Init: Power Port (0)
  144. [ 0.726405] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  145. [ 0.726415] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  146. [ 0.726423] usb usb1: Product: DWC OTG Controller
  147. [ 0.726431] usb usb1: Manufacturer: Linux 4.9.70-v7+ dwc_otg_hcd
  148. [ 0.726438] usb usb1: SerialNumber: 3f980000.usb
  149. [ 0.727201] hub 1-0:1.0: USB hub found
  150. [ 0.727239] hub 1-0:1.0: 1 port detected
  151. [ 0.727870] dwc_otg: FIQ enabled
  152. [ 0.727875] dwc_otg: NAK holdoff enabled
  153. [ 0.727879] dwc_otg: FIQ split-transaction FSM enabled
  154. [ 0.727891] Module dwc_common_port init
  155. [ 0.728118] usbcore: registered new interface driver usb-storage
  156. [ 0.728328] mousedev: PS/2 mouse device common for all mice
  157. [ 0.729384] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  158. [ 0.729701] bcm2835-cpufreq: min=600000 max=1200000
  159. [ 0.730119] sdhci: Secure Digital Host Controller Interface driver
  160. [ 0.730123] sdhci: Copyright(c) Pierre Ossman
  161. [ 0.730403] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
  162. [ 0.732590] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  163. [ 0.732691] sdhci-pltfm: SDHCI platform and OF driver helper
  164. [ 0.735339] ledtrig-cpu: registered to indicate activity on CPUs
  165. [ 0.735531] hidraw: raw HID events driver (C) Jiri Kosina
  166. [ 0.735724] usbcore: registered new interface driver usbhid
  167. [ 0.735728] usbhid: USB HID core driver
  168. [ 0.736517] vchiq: vchiq_init_state: slot_zero = 0xbb980000, is_master = 0
  169. [ 0.738173] [vc_sm_connected_init]: start
  170. [ 0.746818] [vc_sm_connected_init]: end - returning 0
  171. [ 0.747177] Initializing XFRM netlink socket
  172. [ 0.747197] NET: Registered protocol family 17
  173. [ 0.747314] Key type dns_resolver registered
  174. [ 0.747774] Registering SWP/SWPB emulation handler
  175. [ 0.748474] registered taskstats version 1
  176. [ 0.753827] uart-pl011 3f201000.serial: cts_event_workaround enabled
  177. [ 0.753888] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  178. [ 0.756549] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 220, base_baud = 50000000) is a 16550
  179. [ 0.757215] sdhost: log_buf @ bb907000 (fb907000)
  180. [ 0.839476] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  181. [ 0.841677] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  182. [ 0.841685] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  183. [ 0.907011] mmc0: host does not support reading read-only switch, assuming write-enable
  184. [ 0.909023] mmc0: new high speed SDHC card at address 59b4
  185. [ 0.909647] mmcblk0: mmc0:59b4 BB2MW 29.8 GiB
  186. [ 0.911447] mmcblk0: p1 p2
  187. [ 0.919593] of_cfs_init
  188. [ 0.919765] of_cfs_init: OK
  189. [ 0.936452] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  190. [ 0.936730] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  191. [ 0.936772] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  192. [ 0.937883] devtmpfs: mounted
  193. [ 0.938127] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  194. [ 0.939577] Indeed it is in host mode hprt0 = 00021501
  195. [ 0.939720] Freeing unused kernel memory: 1024K
  196. [ 0.999921] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  197. [ 1.002769] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  198. [ 1.013429] random: fast init done
  199. [ 1.094381] mmc1: new high speed SDIO card at address 0001
  200. [ 1.139488] usb 1-1: new high-speed USB device number 2 using dwc_otg
  201. [ 1.139617] Indeed it is in host mode hprt0 = 00001101
  202. [ 1.369780] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  203. [ 1.369793] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  204. [ 1.370654] hub 1-1:1.0: USB hub found
  205. [ 1.370744] hub 1-1:1.0: 5 ports detected
  206. [ 1.504024] systemd[1]: System time before build time, advancing clock.
  207. [ 1.653532] NET: Registered protocol family 10
  208. [ 1.675412] ip_tables: (C) 2000-2006 Netfilter Core Team
  209. [ 1.689511] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  210. [ 1.704705] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  211. [ 1.705283] systemd[1]: Detected architecture arm.
  212. [ 1.714930] systemd[1]: Set hostname to <SonanuTech-Pi>.
  213. [ 1.819813] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  214. [ 1.819826] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  215. [ 1.822613] smsc95xx v1.0.5
  216. [ 1.923270] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:93:2e:a5
  217. [ 2.363152] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  218. [ 2.363744] systemd[1]: Listening on Journal Socket (/dev/log).
  219. [ 2.363994] systemd[1]: Listening on udev Control Socket.
  220. [ 2.364290] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  221. [ 2.364460] systemd[1]: Listening on fsck to fsckd communication Socket.
  222. [ 2.364711] systemd[1]: Listening on Journal Socket.
  223. [ 2.365498] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  224. [ 2.528731] i2c /dev entries driver
  225. [ 3.061029] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  226. [ 3.155730] systemd-journald[119]: Received request to flush runtime journal from PID 1
  227. [ 3.414223] rpi-ft5406 rpi_ft5406: Probing device
  228. [ 3.415995] input: FT5406 memory based driver as /devices/virtual/input/input0
  229. [ 3.438271] Driver for 1-wire Dallas network protocol.
  230. [ 3.452732] w1-gpio 1a.onewire: gpio pin 26, external pullup pin -1, parasitic power 0
  231. [ 3.452762] w1_add_master_device: set_pullup requires write_byte or touch_bit, disabling
  232. [ 3.497649] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  233. [ 3.584413] input: soc:shutdown_button as /devices/platform/soc/soc:shutdown_button/input/input1
  234. [ 3.969847] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
  235. [ 3.980188] usbcore: registered new interface driver brcmfmac
  236. [ 4.018520] smsc95xx 1-1.1:1.0 enxb827eb932ea5: renamed from eth0
  237. [ 4.224492] brcmfmac: Firmware version = wl0: Aug 7 2017 00:46:29 version 7.45.41.46 (r666254 CY) FWID 01-f8a78378
  238. [ 4.225267] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.41 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-08-07 00:37:47
  239. [ 6.219363] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
  240. [ 6.511834] smsc95xx 1-1.1:1.0 enxb827eb932ea5: hardware isn't capable of remote wakeup
  241. [ 8.043344] smsc95xx 1-1.1:1.0 enxb827eb932ea5: link up, 100Mbps, full-duplex, lpa 0xCDE1
  242. [ 8.299918] uart-pl011 3f201000.serial: no DMA platform data
  243. [ 85.640989] random: crng init done
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!