API tools faq
paste
Advertisement
coutinho

BBB RevC HDMI Dmesg

coutinho
Jun 1st, 2015
293
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.46 KB | None | 0 0
raw download clone embed print report
  1. MMC read: dev # 1, block # 26760, count 353 ... 353 blocks read: OK
  2. kernel @ 80008000 (4260144)
  3. ramdisk @ 81000000 (180380)
  4.  
  5. Starting kernel ...
  6.  
  7.  
  8. Cleanup before kernel ...
  9.  
  10.  
  11. Starting kernel, theKernel ...
  12.  
  13. Uncompressing Linux... done, booting the kernel.
  14. [ 0.000000] Linux version 3.2.0-00245-g03f2a1e-dirty (ubuntu@ip-172-31-59-222) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 Thu May 14 12:28:13 UTC 2015
  15. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  16. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  17. [ 0.000000] Machine: am335xevm
  18. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  19. [ 0.000000] AM335X ES2.1 (sgx neon )
  20. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  21. [ 0.000000] Kernel command line: console=ttyO0,115200n8 androidboot.console=ttyO0 mem=512M fixrtc video=1280x720-16@60 root=/dev/ram0 rw initramfs=0x81000000,8M init=/init ip=off omap_vout.vid1_static_vrfb_alloc=y vram=20M omapfb.vram=20M
  22. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  23. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  24. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  25. [ 0.000000] Memory: 512MB = 512MB total
  26. [ 0.000000] Memory: 509496k/509496k available, 14792k reserved, 0K highmem
  27. [ 0.000000] Virtual kernel memory layout:
  28. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  30. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  31. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  32. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  33. [ 0.000000] .text : 0xc0008000 - 0xc07b8000 (7872 kB)
  34. [ 0.000000] .init : 0xc07b8000 - 0xc080e000 ( 344 kB)
  35. [ 0.000000] .data : 0xc080e000 - 0xc087df70 ( 448 kB)
  36. [ 0.000000] .bss : 0xc087df94 - 0xc09d66d0 (1378 kB)
  37. [ 0.000000] NR_IRQS:396
  38. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  39. [ 0.000000] Total of 128 interrupts on 1 active controller
  40. [ 0.000000] OMAP clockevent source: GPTIMER2 at 24000000 Hz
  41. [ 0.000000] OMAP clocksource: GPTIMER1 at 32768 Hz
  42. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  43. [ 0.000000] Console: colour dummy device 80x30
  44. [ 0.000091] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
  45. [ 0.089233] pid_max: default: 32768 minimum: 301
  46. [ 0.089324] Security Framework initialized
  47. [ 0.089385] Mount-cache hash table entries: 512
  48. [ 0.089721] CPU: Testing write buffer coherency: ok
  49. [ 0.089782] ftrace: allocating 22433 entries in 66 pages
  50. [ 0.145996] omap_hwmod: pruss: failed to hardreset
  51. [ 0.146667] print_constraints: dummy:
  52. [ 0.146820] NET: Registered protocol family 16
  53. [ 0.147705] OMAP GPIO hardware version 0.1
  54. [ 0.148529] omap_mux_init: Add partition: #1: core, flags: 0
  55. [ 0.149444] omap_i2c.1: alias fck already exists
  56. [ 0.149871] omap2_mcspi.1: alias fck already exists
  57. [ 0.149932] omap2_mcspi.2: alias fck already exists
  58. [ 0.150054] edma.0: alias fck already exists
  59. [ 0.150054] edma.0: alias fck already exists
  60. [ 0.150085] edma.0: alias fck already exists
  61. [ 0.158935] bio: create slab <bio-0> at 0
  62. [ 0.159729] SCSI subsystem initialized
  63. [ 0.160461] usbcore: registered new interface driver usbfs
  64. [ 0.160552] usbcore: registered new interface driver hub
  65. [ 0.160675] usbcore: registered new device driver usb
  66. [ 0.160919] registerd cppi-dma Intr @ IRQ 17
  67. [ 0.160919] Cppi41 Init Done Qmgr-base(e087a000) dma-base(e0878000)
  68. [ 0.160919] Cppi41 Init Done
  69. [ 0.160949] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3
  70. [ 0.161071] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1
  71. [ 0.179229] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz
  72. [ 0.179870] tps65910 1-002d: could not be detected
  73. [ 0.180267] Advanced Linux Sound Architecture Driver Version 1.0.24.
  74. [ 0.180725] Bluetooth: Core ver 2.16
  75. [ 0.180786] NET: Registered protocol family 31
  76. [ 0.180816] Bluetooth: HCI device and connection manager initialized
  77. [ 0.180816] Bluetooth: HCI socket layer initialized
  78. [ 0.180816] Bluetooth: L2CAP socket layer initialized
  79. [ 0.180847] Bluetooth: SCO socket layer initialized
  80. [ 0.180999] Switching to clocksource gp timer
  81. [ 0.195037] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  82. [ 0.195190] musb-hdrc musb-hdrc.0: dma type: dma-cppi41
  83. [ 0.195373] MUSB0 controller's USBSS revision = 4ea20800
  84. [ 0.195404] musb0: Enabled SW babble control
  85. [ 0.196075] musb-hdrc musb-hdrc.0: USB OTG mode controller at e083c000 using DMA, IRQ 18
  86. [ 0.196289] musb-hdrc musb-hdrc.1: dma type: dma-cppi41
  87. [ 0.196411] MUSB1 controller's USBSS revision = 4ea20800
  88. [ 0.196411] musb1: Enabled SW babble control
  89. [ 0.196746] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
  90. [ 0.196838] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
  91. [ 0.196929] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  92. [ 0.196960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  93. [ 0.196960] usb usb1: Product: MUSB HDRC host driver
  94. [ 0.196960] usb usb1: Manufacturer: Linux 3.2.0-00245-g03f2a1e-dirty musb-hcd
  95. [ 0.196990] usb usb1: SerialNumber: musb-hdrc.1
  96. [ 0.197357] hub 1-0:1.0: USB hub found
  97. [ 0.197387] hub 1-0:1.0: 1 port detected
  98. [ 0.197692] musb-hdrc musb-hdrc.1: USB Host mode controller at e083e800 using DMA, IRQ 19
  99. [ 0.197967] NET: Registered protocol family 2
  100. [ 0.198150] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  101. [ 0.198455] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  102. [ 0.198669] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  103. [ 0.198791] TCP: Hash tables configured (established 16384 bind 16384)
  104. [ 0.198791] TCP reno registered
  105. [ 0.198822] UDP hash table entries: 256 (order: 0, 4096 bytes)
  106. [ 0.198822] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  107. [ 0.199005] NET: Registered protocol family 1
  108. [ 0.199218] RPC: Registered named UNIX socket transport module.
  109. [ 0.199218] RPC: Registered udp transport module.
  110. [ 0.199218] RPC: Registered tcp transport module.
  111. [ 0.199249] RPC: Registered tcp NFSv4.1 backchannel transport module.
  112. [ 0.199432] Trying to unpack rootfs image as initramfs...
  113. [ 0.210784] Freeing initrd memory: 176K
  114. [ 0.210815] NetWinder Floating Point Emulator V0.97 (double precision)
  115. [ 0.305206] ashmem: initialized
  116. [ 0.305419] VFS: Disk quotas dquot_6.5.2
  117. [ 0.305450] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  118. [ 0.306152] fuse init (API version 7.17)
  119. [ 0.306304] msgmni has been set to 995
  120. [ 0.307128] io scheduler noop registered
  121. [ 0.307128] io scheduler deadline registered
  122. [ 0.307189] io scheduler cfq registered (default)
  123. [ 0.307678] Could not set LED4 to fully on
  124. [ 0.341705] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
  125. [ 0.981781] console [ttyO0] enabled
  126. [ 0.985809] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
  127. [ 0.993438] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
  128. [ 1.001037] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
  129. [ 1.008636] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
  130. [ 1.016235] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
  131. [ 1.023956] [drm] Initialized drm 1.1.0 20060810
  132. [ 1.033233] brd: module loaded
  133. [ 1.038787] loop: module loaded
  134. [ 1.042266] i2c-core: driver [tsl2550] using legacy suspend method
  135. [ 1.048736] i2c-core: driver [tsl2550] using legacy resume method
  136. [ 1.055175] at24 1-0051: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  137. [ 1.161590] No daughter card found on AM335x EVM
  138. [ 1.166442] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  139. [ 1.181640] Board name: A335BNLT
  140. [ 1.184997] Board version: 00C0
  141. [ 1.188262] The board is a AM335x Beaglebone Black.
  142. [ 1.195007] tps65217 1-0024: TPS65217 ID 0xe version 1.2
  143. [ 1.202270] print_constraints: DCDC1: 900 <--> 1800 mV at 1500 mV
  144. [ 1.210479] print_constraints: DCDC2: 900 <--> 3300 mV at 1325 mV
  145. [ 1.218658] print_constraints: DCDC3: 900 <--> 1500 mV at 1125 mV
  146. [ 1.226837] print_constraints: LDO1: 1000 <--> 3300 mV at 1800 mV
  147. [ 1.235015] print_constraints: LDO2: 900 <--> 3300 mV at 3300 mV
  148. [ 1.243103] print_constraints: LDO3: 1800 <--> 3300 mV at 1800 mV
  149. [ 1.251281] print_constraints: LDO4: 1800 <--> 3300 mV at 3300 mV
  150. [ 1.260986] omap_hsmmc.0: alias fck already exists
  151. [ 1.266265] omap_hsmmc.1: alias fck already exists
  152. [ 1.271484] omap_i2c.3: alias fck already exists
  153. [ 1.276611] usb 1-1: new full-speed USB device number 2 using musb-hdrc
  154. [ 1.291625] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
  155. [ 1.297973] davinci-mcasp.0: alias fck already exists
  156. [ 1.304595] at24 3-0054: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  157. [ 1.311889] IN : bone_setup_display_daughter_board
  158. [ 1.411590] No display cape found on BeagleBone
  159. [ 1.416778] da8xx_lcdc.0: alias fck already exists
  160. [ 1.422088] da8xx_lcdc da8xx_lcdc.0: GLCD: Found nxp-1280x720@60 panel
  161. [ 1.441436] usb 1-1: New USB device found, idVendor=0f30, idProduct=0001
  162. [ 1.448455] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  163. [ 1.455932] usb 1-1: Product: Air Mouse
  164. [ 1.459930] usb 1-1: Manufacturer: HJT
  165. [ 1.593933] tda998x 1-0070: found TDA19988
  166. [ 1.725952] tda998x 1-0070: Connected to an HDMI monitor with cea mode 2
  167. [ 1.762542] Setup HDMI display complete
  168. [ 1.766754] at24 3-0055: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  169. [ 1.774047] IN : bone_setup_daughter_board
  170. [ 1.871643] at24 3-0056: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  171. [ 1.878936] IN : bone_setup_daughter_board
  172. [ 1.961639] at24 3-0057: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  173. [ 1.968933] IN : bone_setup_daughter_board
  174. [ 2.051788] (hci_tty): inside hci_tty_init
  175. [ 2.056213] (hci_tty): allocated 251, 0
  176. [ 2.060943] mtdoops: mtd device (mtddev=name/number) must be supplied
  177. [ 2.067840] omap2-nand driver initializing
  178. [ 2.072174] OneNAND driver initializing
  179. [ 2.076568] CAN device driver interface
  180. [ 2.080566] CAN bus driver for Bosch D_CAN controller 1.0
  181. [ 2.131652] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
  182. [ 2.138122] davinci_mdio davinci_mdio.0: detected phy mask fffffffe
  183. [ 2.145416] davinci_mdio.0: probed
  184. [ 2.148986] davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver SMSC LAN8710/LAN8720
  185. [ 2.157592] PPP generic driver version 2.4.2
  186. [ 2.162200] PPP BSD Compression module registered
  187. [ 2.167114] PPP Deflate Compression module registered
  188. [ 2.172515] usbcore: registered new interface driver cdc_ether
  189. [ 2.178649] usbcore: registered new interface driver cdc_eem
  190. [ 2.184631] usbcore: registered new interface driver dm9601
  191. [ 2.190490] usbcore: registered new interface driver cdc_subset
  192. [ 2.196716] cdc_ncm: 04-Aug-2011
  193. [ 2.200134] usbcore: registered new interface driver cdc_ncm
  194. [ 2.206146] usbcore: registered new interface driver cdc_acm
  195. [ 2.212097] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  196. [ 2.220458] Initializing USB Mass Storage driver...
  197. [ 2.225677] usbcore: registered new interface driver usb-storage
  198. [ 2.231964] USB Mass Storage support registered.
  199. [ 2.236907] usbcore: registered new interface driver usbserial
  200. [ 2.243072] USB Serial support registered for generic
  201. [ 2.248443] usbcore: registered new interface driver usbserial_generic
  202. [ 2.255279] usbserial: USB Serial Driver core
  203. [ 2.259857] USB Serial support registered for GSM modem (1-port)
  204. [ 2.266326] usbcore: registered new interface driver option
  205. [ 2.272186] option: v0.7.2:USB Driver for GSM modems
  206. [ 2.278656] gadget: Mass Storage Function, version: 2009/09/11
  207. [ 2.284881] gadget: Number of LUNs=1
  208. [ 2.288726] lun0: LUN: removable file: (no medium)
  209. [ 2.294006] gadget: android_usb ready
  210. [ 2.297943] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
  211. [ 2.303558] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
  212. [ 2.311401] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  213. [ 2.318511] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  214. [ 2.326049] usb usb2: Product: MUSB HDRC host driver
  215. [ 2.331237] usb usb2: Manufacturer: Linux 3.2.0-00245-g03f2a1e-dirty musb-hcd
  216. [ 2.338714] usb usb2: SerialNumber: musb-hdrc.0
  217. [ 2.343841] hub 2-0:1.0: USB hub found
  218. [ 2.347778] hub 2-0:1.0: 1 port detected
  219. [ 2.352416] mousedev: PS/2 mouse device common for all mice
  220. [ 2.359191] using rtc device, am33xx-rtc, for alarms
  221. [ 2.364318] omap_rtc am33xx-rtc: rtc core: registered am33xx-rtc as rtc0
  222. [ 2.371582] i2c /dev entries driver
  223. [ 2.375518] Linux media interface: v0.10
  224. [ 2.379669] Linux video capture interface: v2.00
  225. [ 2.384582] i2c-core: driver [tuner] using legacy suspend method
  226. [ 2.390869] i2c-core: driver [tuner] using legacy resume method
  227. [ 2.397277] usbcore: registered new interface driver em28xx
  228. [ 2.403106] em28xx driver loaded
  229. [ 2.406494] Em28xx: Initialized (Em28xx Audio Extension) extension
  230. [ 2.413024] usbcore: registered new interface driver Philips webcam
  231. [ 2.419555] gspca_main: v2.14.0 registered
  232. [ 2.424041] usbcore: registered new interface driver uvcvideo
  233. [ 2.430023] USB Video Class driver (1.1.1)
  234. [ 2.692321] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  235. [ 2.698822] device-mapper: uevent: version 1.0.3
  236. [ 2.703796] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  237. [ 2.712646] Bluetooth: HCI UART driver ver 2.2
  238. [ 2.717285] Bluetooth: HCI H4 protocol initialized
  239. [ 2.722320] Bluetooth: HCILL protocol initialized
  240. [ 2.727233] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
  241. [ 2.734649] cpuidle: using governor ladder
  242. [ 2.739044] cpuidle: using governor menu
  243. [ 2.748596] input: HJT Air Mouse as /devices/platform/omap/musb-ti81xx/musb-hdrc.1/usb1/1-1/1-1:1.0/input/input0
  244. [ 2.759460] generic-usb 0003:0F30:0001.0001: input: USB HID v1.11 Keyboard [HJT Air Mouse] on usb-musb-hdrc.1-1/input0
  245. [ 2.774078] input: HJT Air Mouse as /devices/platform/omap/musb-ti81xx/musb-hdrc.1/usb1/1-1/1-1:1.1/input/input1
  246. [ 2.784973] generic-usb 0003:0F30:0001.0002: input: USB HID v1.11 Mouse [HJT Air Mouse] on usb-musb-hdrc.1-1/input1
  247. [ 2.796020] usbcore: registered new interface driver usbhid
  248. [ 2.801849] usbhid: USB HID core driver
  249. [ 2.806427] logger: created 256K log 'log_main'
  250. [ 2.811218] logger: created 256K log 'log_events'
  251. [ 2.816284] logger: created 256K log 'log_radio'
  252. [ 2.821166] logger: created 256K log 'log_system'
  253. [ 2.826629] usbcore: registered new interface driver snd-usb-audio
  254. [ 2.834777] asoc: am335x-hdmi-hifi <-> davinci-mcasp.0 mapping ok
  255. [ 2.841735] ALSA device list:
  256. [ 2.844848] #0: AM335X BONE
  257. [ 2.847961] oprofile: hardware counters not available
  258. [ 2.853240] oprofile: using timer interrupt.
  259. [ 2.857849] Netfilter messages via NETLINK v0.30.
  260. [ 2.862884] nf_conntrack version 0.5.0 (7963 buckets, 31852 max)
  261. [ 2.869476] ctnetlink v0.93: registering with nfnetlink.
  262. [ 2.875091] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  263. [ 2.882385] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  264. [ 2.888732] xt_time: kernel timezone is -0000
  265. [ 2.893524] ip_tables: (C) 2000-2006 Netfilter Core Team
  266. [ 2.899230] arp_tables: (C) 2002 David S. Miller
  267. [ 2.904144] TCP cubic registered
  268. [ 2.907623] NET: Registered protocol family 10
  269. [ 2.912933] Mobile IPv6
  270. [ 2.915527] ip6_tables: (C) 2000-2006 Netfilter Core Team
  271. [ 2.921325] IPv6 over IPv4 tunneling driver
  272. [ 2.926239] NET: Registered protocol family 17
  273. [ 2.930908] NET: Registered protocol family 15
  274. [ 2.935577] can: controller area network core (rev 20090105 abi 8)
  275. [ 2.942138] NET: Registered protocol family 29
  276. [ 2.946807] can: raw protocol (rev 20090105)
  277. [ 2.951263] can: broadcast manager protocol (rev 20090105 t)
  278. [ 2.957519] Bluetooth: RFCOMM TTY layer initialized
  279. [ 2.962707] Bluetooth: RFCOMM socket layer initialized
  280. [ 2.968109] Bluetooth: RFCOMM ver 1.11
  281. [ 2.972045] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  282. [ 2.977600] Bluetooth: BNEP filters: protocol multicast
  283. [ 2.983062] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  284. [ 2.989379] Registering the dns_resolver key type
  285. [ 2.994384] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  286. [ 3.002410] ThumbEE CPU extension supported.
  287. [ 3.006927] mux: Failed to setup hwmod io irq -22
  288. [ 3.012420] Power Management for AM33XX family
  289. [ 3.017242] Trying to load am335x-pm-firmware.bin (60 secs timeout)
  290. [ 3.023956] Copied the M3 firmware to UMEM
  291. [ 3.028320] Cortex M3 Firmware Version = 0x181
  292. [ 3.035919] clock: disabling unused clocks to save power
  293. [ 3.042816] Detected MACID=d0:39:72:97:9f:2f
  294. [ 3.048370] omap_rtc am33xx-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
  295. [ 3.057922] Freeing init memory: 344K
  296. [ 3.068786] init: /init.am335xevm.rc: 5: invalid command 'log'
  297. [ 3.076019] init: /init.am335xevm.rc: 8: invalid command 'log'
  298. [ 3.084259] init: /init.am335xevm.rc: 69: invalid command '/etc/pcmUpdate.sh'
  299. [ 3.092193] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  300. [ 3.130859] mmc1: new high speed MMC card at address 0001
  301. [ 3.141876] mmcblk0: mmc1:0001 MMC04G 3.65 GiB
  302. [ 3.146820] mmcblk0boot0: mmc1:0001 MMC04G partition 1 1.00 MiB
  303. [ 3.161987] mmcblk0boot1: mmc1:0001 MMC04G partition 2 1.00 MiB
  304. [ 3.173736] Alternate GPT is invalid, using primary GPT.
  305. [ 3.179412] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
  306. [ 3.193725] mmcblk0boot1: unknown partition table
  307. [ 3.201629] mmcblk0boot0: unknown partition table
  308. [ 3.209350] init: cannot open '/initlogo.rle'
  309. [ 3.217987] fs_mgr: Warning: unknown flag nomblk_io_submit
  310. [ 3.223999] fs_mgr: Warning: unknown flag errors=panic
  311. [ 3.232025] EXT4-fs (mmcblk0p6): INFO: recovery required on readonly filesystem
  312. [ 3.239685] EXT4-fs (mmcblk0p6): write access will be enabled during recovery
  313. [ 3.967742] EXT4-fs (mmcblk0p6): recovery complete
  314. [ 3.975738] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
  315. [ 4.084838] EXT4-fs (mmcblk0p7): recovery complete
  316. [ 4.091369] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
  317. [ 4.380493] EXT4-fs (mmcblk0p8): recovery complete
  318. [ 4.387145] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
  319. [ 4.401306] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
  320. [ 4.442993] cfg80211: Calling CRDA to update world regulatory domain
  321. [ 4.506622] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  322. [ 4.528259] android_usb: already disabled
  323. [ 4.537628] android_usb: already disabled
  324. [ 4.543182] android_usb: already disabled
  325. [ 4.548645] adb_bind_config
  326. [ 4.553741] adb_bind_config
  327. [ 4.558807] warning: `adbd' uses 32-bit capabilities (legacy support in use)
  328. [ 4.568206] adb_open
  329. [ 4.707611] cfg80211: World regulatory domain updated:
  330. [ 4.713104] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  331. [ 4.721832] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  332. [ 4.730133] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  333. [ 4.738403] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  334. [ 4.746704] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  335. [ 4.754974] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  336. root@android:/ # [ 4.823272] Disabling lock debugging due to kernel taint
  337. [ 16.181976] request_suspend_state: wakeup (3->0) at 16159629036 (2000-01-01 00:00:14.627015233 UTC)
  338. [ 17.633911] net eth0: CPSW phy found : id is : 0x7c0f1
  339. [ 17.640075] PHY 0:01 not found
  340. [ 17.651306] ADDRCONF(NETDEV_UP): eth0: link is not ready
  341. [ 18.205963] acc_open
  342. [ 18.208312] acc_release
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!