EX3301-T0 bootlog

BGA IC
Xtal:1
DDR3 init.
DRAMC init done.
Calculate size.
DRAM size=256MB
Set new TRFC.
ddr-1333



7516DRAMC V1.0 (0)


Press 'x' or 'b' key in 1 secs to enter or skip bootloader upgrade.


EN751627 at Fri Dec 11 14:34:44 CST 2020 version 1.1 free bootbase

Set SPI Clock to 50 Mhz
spi_nand_probe: mfr_id=0xef, dev_id=0xaa
Using Flash ECC.
Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N01G, Flash Size=0x8000000
bmt pool size: 81
BMT & BBT Init Success



ZyXEL zloader v1.4.3 (12/11/2020 - 14:34:42)
Multiboot client version: 2.5
Not found TC Phy


Not found TC Phy


Not found TC Phy


Not found TC Phy


Not found TC Phy


  GE Rext AnaCal Done! (7)(0x19)



Hit any key to stop autoboot:  5..4..3..2..1..0



==> boot flag = 1



 slave tclinux.bin have ZYXEL trx header!
from slave
Decompress to 80002000 free_mem_ptr=81100000 free_mem_ptr_end=80780000
Uncompressing [LZMA] ...  done.
ECNT ring buffer init success
mknod: /dev/ppp: File exists
mknod: /dev/ptmx: File exists
mknod: /dev/ptyp0: File exists
mknod: /dev/ptyp1: File exists
mknod: /dev/ptyp2: File exists
mknod: /dev/ttyp0: File exists
mknod: /dev/ttyp1: File exists
mknod: /dev/ttyp2: File exists
mknod: /dev/watchdog: File exists
mknod: /dev/hwnat0: File exists
mknod: /dev/acl0: File exists
mknod: /dev/ac0: File exists
mknod: /dev/mtr0: File exists
**************prepare var*****************
busybox init and set aff

init started: BusyBox v1.20.1 (2022-06-29 14:27:12 CST)
chmod: /userfs/profile.cfg: Read-only file system
TCSUPPORT_IPV6
Reading MT7915D 5G EEPROM from flash reservearea
mtd[readflash]:device=reservearea tclen=4096 tcoffset=172032
Unlocking reservearea ...
Reading from reservearea to /etc/Wireless/RT2860AP_AC/RT30xxEEPROM.bin ...
insmod ETH_LAN driver
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
Exec. Successful
install dmt for mt7510
Do not load tc3162 dmt on rcS !
TCSUPPORT_WLAN
TCSUPPORT_DUAL_WLAN_MT7915E
insmod: can't insert '/lib/modules/3.18.21/mt7915_ap.ko': No such file or directory
TCSUPPORT_MAP_FILTER
ifconfig: SIOCGIFFLAGS: No such device
**************lan port init*****************
four ports
device eth0 is not a slave of br0
taskset: invalid number '0x8'
date: invalid date '010100002012'
/etc/init.d/rcS: line 1521: /userfs/bin/wpa_supplicant: not found
CO-FW parameter.......... PRODUCT_NAME_VOIP_CHECK=1
MTK DSP support
voip_loader start
START CHECK ZARLIN ZSI
START CHECK SILICON ISI
[SLIC] si32280
Loading si32280,slic num:1
Loading common
init mod-ksocket
init mod-acodec
init mod-foip3
voip loader end
taskset: invalid number '0x8'
taskset: invalid number '0x8'
taskset: invalid number '0x8'
taskset: invalid number '0x8'
taskset: invalid number '0x8'
wan ether support
TCSUPPORT_WLAN_SW_RPS
VDSP_GetInstance:278
Exec. Successful
/proc/net/skbmgr_4k_limit ???
Jan  1 00:00:28 crond[433]: crond: crond (busybox 1.20.1) started, log level 8


START disable Lan and Wan...
ln: /dev/log: File exists

dnsmasq: unknown user or group: root
unknown user or group: rootFAILED to start upsh: _TARGET_UBI_VOLUME_: bad number
>>>>> mtd misc was mounted! <<<<<
Wed Jun 29 15:03:34 UTC 2022
01:00:00
00:00:00
/bin/sh: envrams: not found
zyshcmd_wrapper Start.
zcfg_schema.bin
killall: zywifid_run.sh: no process killed
devName=/dev/mtd1: mtd.oobsize 64 mtd.writesize 2048
romfile type ffff
romfile size 4294967295
romfile crc 65535
[ZCMD]zcmdDataModelInit:7500 : use config
The device support wifi!
killall: zywifid: no process killed
zywifid> [ALERT] wifi_module_init:1185: load libzywl_001_ecn.so ..........
zywifid> [ALERT] main:1357: Check and fix Wifi MAC address......
parse /etc/zcmd_rom_convert fail.
rm: can't remove '/tmp/wifiScanTime*': No such file or directory

zcmdInstallDmtMct: install default DMT!
MAX Number of Interface Stack is 254
zcmdObjsMergeDfltParam not init yet!
FW_WATCHER Start
devName=/dev/mtd8: mtd.oobsize 64 mtd.writesize 2048
Notice: zyUtilUpdateWWANPackage, No WWAN Package in Flash!
wwanpackage info: revision is 1.24
zyUtilTcpSvrInit
zcmdBeInit(): DL opening...
Initial 1: begui_customization....
Initial 2: bedevice....
Chain MACFILTER already exists.
Initial 3: bedsl....
sh: can't kill pid 663: No such process
Jun 28 00:00:05 crond[674]: crond: crond (busybox 1.20.1) started, log level 8


Initial 4: beatmlink....
Initial 5: beptmlink....
Initial 6: belog....
killall: tty_log_echo: no process killed
killall: mailsend: no process killed
Set interval time = 60 second
killall: syslog-ng: no process killed
Error resolving user; user='root'
Initial 7: besysinfo....
Initial 8: beaccount....
mkdir: can't create directory '/var/tmp': File exists
chmod: /data/zcfg_predef.json: No such file or directory
chmod: /data/zcfg_predef.json: No such file or directory
Initial 9: bedevinfo....
Initial 10: beethlink....
Initial 11: beethintf....
auto, Auto-negotiation enabled.
No common media type was autonegotiated!
This is extremely unusual and typically indicates a configuration error.
Perhaps the advertised capability set was intentionally limited.
Link is down
auto, Auto-negotiation enabled.
No common media type was autonegotiated!
This is extremely unusual and typically indicates a configuration error.
Perhaps the advertised capability set was intentionally limited.
Link is down
auto, Auto-negotiation enabled.
No common media type was autonegotiated!
This is extremely unusual and typically indicates a configuration error.
Perhaps the advertised capability set was intentionally limited.
Link is down
cat: can't open '/proc/nvram/wl_nand_manufacturer': No such file or directory
Starting LXC support ...
starting ZYEE support ...
cp: can't stat '/misc/modsw/tr157du/zyee/tmpSoftwaremoudle.json/lxc.conf': Not a directory
*reg=0000001c value:68106810


Load NComm TMS Module.

Please press Enter to activate this console. auto, Auto-negotiation enabled.
No common media type was autonegotiated!
This is extremely unusual and typically indicates a configuration error.
Perhaps the advertised capability set was intentionally limited.
Link is down
Initial 12: bewifi_radio....
Initial 13: bewifi_ssid....
Initial 14: bewifi_ap....
Initial 15: bebridging....
Initial 16: bebridgingbr....
Initial 17: bebridgePort....
sh: write error: Invalid argument
device ra0 is not a slave of br0
interface ra1 does not exist!
interface ra2 does not exist!
interface rai0 does not exist!
interface rai1 does not exist!
interface rai2 does not exist!
interface rai3 does not exist!
interface rai4 does not exist!
interface rai5 does not exist!
sh: write error: Invalid argument
/bin/sh: can't create /sys/class/net/br1/bridge/group_fwd_mask: nonexistent directory
interface ra3 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
bridge br1 doesn't exist; can't delete it
sh: write error: Invalid argument
Initial 18: bebridgeFilter....
Initial 19: bewifi....
Initial 20: bevlanTerm....
Initial 21: beipiface....
zywifid:Config> [ERROR] zyWifiUpdateLanInfo:452: No wifi interface on module(ECN).
Initial 22: benatIntf....
ftp switch turn on


sip switch turn on


conntrack v1.4.3 (conntrack-tools): 0 flow entries have been deleted.
conntrack v1.4.3 (conntrack-tools): 0 flow entries have been deleted.
modprobe: module nf_conntrack_rtsp not found in modules.dep
rtsp switch turn on


pptp switch turn on


Initial 23: bev4addr....
Initial 24: bev6addr....
Initial 25: bev6prefix....
Initial 26: beusbhost....
Initial 27: beusbintf....
Initial 28: beusbport....
Initial 29: berouter....
Initial 30: berainfo....
Initial 31: bedhcp4_server....
Initial 32: bedhcp4_serverpool....
Initial 33: bedhcp4_serverpool_staticaddr....
Initial 34: bedhcp4_serverpool_option....
Initial 35: bedhcp4_serversubnet....
killall: dnsmasq: no process killed
Initial 36: bedhcp4_relay....
Initial 37: bedhcp6_server....
Initial 38: bedhcp6_serverpool....
killall: dhcp6s: no process killed
Initial 39: bepppiface....
Initial 40: bepppifaceipcp....
Initial 41: bedhcp4_client....
Initial 42: bedhcp6_client....
Initial 43: beradvd....
Initial 44: bedns....
Initial 45: bedns_route....
Initial 46: bedns_server....
Initial 47: betime....
killall: ntpclient: no process killed
Initial 48: benat_port_map....
Initial 49: benat_port_trigger....
Initial 50: benat_addr_mapping....
Initial 51: benat_pcp....
Initial 52: besessCtl....
/bin/sh: can't create /proc/zy_nf_ct_udp_STB_port: nonexistent directory
/bin/sh: can't create /proc/zy_nf_ct_udp_STB_timeout: nonexistent directory
Initial 53: befirewall....
Initial 54: betr69....
Initial 55: bediagnostic....
cat: can't open '/proc/driver/license': No such file or directory
killall: tmsctl: no process killed
Initial 56: beschedule....
Initial 57: beparenCtl....
Initial 58: beqos....
Initial 59: beqosQueue....
Initial 60: beqosClass....
Initial 61: beqosShaper....
Initial 62: beqosPolicer....
Initial 63: be6rd....
Initial 64: beigmp....
cp: can't stat '/etc/mcpd_igmp.conf': No such file or directory
/bin/sh: can't create /proc/zy_igmp_noipsrcaddr_enable: nonexistent directory
Compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack ipset auth no-DNSSEC no-ID loop-detect inotify
Initial 65: besnmp....
Initial 66: bemld....
cp: can't stat '/etc/mcpd_mld.conf': No such file or directory
cat: can't open '/var/run/ecmh.pid': No such file or directory
sh: you need to specify whom to kill
Initial 67: bevcAutoHunt....
Initial 68: bevlanAutoHunt....
Initial 69: beupnp....
Initial 70: bemacfilter....
Initial 71: bemacfilter_whitelist....
Initial 72: beuserinterface....
Initial 73: beremoMgmt....
mount: mounting devpts on /dev/pts failed: Device or resource busy
Initial 74: bechangehosticon....
Initial 75: behosts....
Initial 76: behostshost....
Initial 77: becert....
Initial 78: bepacketcapture....
Initial 79: beportmirror....
Initial 80: bedslite....
Initial 81: bemap....
Initial 82: beSTBVendorID....
Initial 83: berip....
killall: ripd: no process killed
Initial 84: betr64....
Initial 85: bewwanbackup....
Initial 86: besamba....
writing RSA key
starting smbd.
wwanbackup info: WWANBACKUP start
wwanbackup info: WWANBACKUP_DEBUG is 0
Initial http with port(443), SSL enable.
Initial http with port(80), SSL disable.
file size of source = 2
Initial 87: bevoiceSrv....
Initial 88: bevoiceCap....
Initial 89: bevoiceCapSip....
Initial 90: bevoiceCapCodec....
Initial 91: bevoiceCommon....
Initial 92: bevoiceProf....
Initial 93: bevoiceProfSip....
Initial 94: bevoiceProfFaxT38....
Initial 95: bevoiceProfNumberingPlan....
Initial 96: bevoiceProfNumberingPlanPrefixInfo....
Initial 97: bevoiceProfRTP....
Initial 98: bevoiceProfRTPSRTP....
Initial 99: bevoiceLine....
Initial 100: bevoiceLineSip....
Initial 101: bevoiceLineProc....
Initial 102: bevoiceLineCallingFeatures....
Initial 103: bevoiceLineCodecList....
Initial 104: bevoiceLineStats....
Initial 105: bevoiceLineRinger....
Initial 106: bevoiceLineRingerDescription....
Initial 107: bevoicePhyIntf....
Initial 108: bevoiceFxsCid....
Initial 109: bevoiceSpeedDialBookList....
Initial 110: bevoiceCallPolicyBook....
Initial 111: bevoiceCallPolicyBookList....
Initial 112: bevoiceCallStatus....
Initial 113: bednsentry....
Initial 114: bezx....
Initial 115: bedlna....
Initial 116: bevlangroup....
Initial 117: beTFTPServerName....
Initial 118: bespeedtest....
Initial 119: beoneconnect....
Initial 120: beoneconnectPCRule....
Initial 121: bewifi_easymesh....
Initial 122: bewpsbuttonpress....
Initial 123: bewifi_onessid....
Initial 124: beLifemote....
Initial 125: bezlog....
killall: mailsend: no process killed
Set interval time = 60 second
Initial 126: beurl_filter....
iptables v1.4.10: Couldn't find target `SKIPLOG'

Try `iptables -h' or 'iptables --help' for more information.
Initial 127: behome_cyber_security....
Initial 128: bezylicense....
/bin/sh: /bin/zylicense: not found
Initial 129: bezyee....
Initial 130: bemosUserConfig....
/bin/sh: /usr/etc/init.d/init_cdbg.sh: not found
Initial 131: beduStateChangeComplPol....
Initial 132: beddns....
Initial 133: bevpnClient....
/bin/sh: /bin/mosapp: not found
Initial 134: befeatureFlag....
Back-end module init finished
Initial USB driver...
turn on ztr69
cwmp_init:2010 : getpid() = 1575
zcfgObjectPathListToStruct: clear objectPathList
zcfgObjectPathListToStruct: objectPathList: Device.WiFi.AccessPoint.9,Device.WiFi.SSID.9,Device.WiFi.AccessPoint.10,Device.WiFi.SSID.10
zcfgFeTr98QueryHandleRoutInit
zcfgFeTr181SpvHandleRoutInit
zcfgFeTr181QueryHandleRoutInit
cwmp_get_acsInfo: reset redirect server
resolveSrvUrlName() availableMode=, unknown case!
resolveSrvUrlName(): getaddrinfo fail!! ret:-2
/bin/sh: /etc/init.d/mcpd.sh: not found
START enable Lan and Wan...
rm: can't remove '/tmp/app_sock': No such file or directory
bridge name br0
database_init : /data/netprb_db_ver
database_init : Create Device table
database_init : Create Sub Interface table
database_init : Create L2 Device Functions table
arp_init     : arp_event->event_id 1
layer2_init  : layer2_event->event_id 2
ethlink_init : ethlink_event->event_id 3
[/sbin/wwan-package-match.sh] VID 1d6b no match, exit
writing RSA key
Restarting ZyIMS VoIP
Initial http with port(20443), SSL enable.
killall: voiceApp: no process killed
killall: mm.exe: no process killed
DeviceDiscRespPayload={
   "ApiName": "ZYXEL RESTful API",
   "ModelName": "EX3301-T0",
   "SoftwareVersion": "V5.50(ABVY.3.1)I0",
   "DeviceMode": "Router",
   "SupportedApiVersion": [
     {
       "ApiVersion": "1.0",
       "LoginURI": "\/api\/v1\/UserLogin",
       "Protocol": "HTTPS",
       "HttpsPort": 20443
     }
   ],
   "MAC": "FC:22:F4:78:3D:20"
 }
APP Agent UDP socket ready!
killall: icf.exe: no process killed
TR181 object IP.Interface.1
zyExtRemoteMgmtSrvObjGet : Enter
l3fwdObjGet : Enter
l3fwdGetDfGwByRtTable: enter, 4
l3fwdGetDfGwByRtTable: ifname =
l3fwdGetDfGwByRtTable: No find default gateway interface!!

============================================================================
UPnP Mapping table Dump:
TR98 Object Name                                                            : UPnP service Id
InternetGatewayDevice.Layer3Forwarding                                      : urn:upnp-org:serviceId:Layer3Forwarding.1
============================================================================

l3fwdObjGet : Enter
l3fwdGetDfGwByRtTable: enter, 4
l3fwdGetDfGwByRtTable: ifname =
l3fwdGetDfGwByRtTable: No find default gateway interface!!
[/sbin/wwan-package-match.sh] VID 1d6b no match, exit
zcmd.c line 6831, zcmdReqProcess() : get ZCFG_MSG_INIT_DATAMODEL_FIN
zcmd.c line 8003, zcmdEnableConfigSave() : enable tr98mapTableSaveFlag and configSaveFlag
[/sbin/usb-hotplug.sh] add /var/usb/usb1
[MM] main(): getpid = 1753
AppRegisterSignal(): mm.exe pid = 1753
[MM]dspDriverDeinit(): DSP & Phone Port driver is already De-initialized ==> skip the action!!
WARNING: no real random source present!
srtpInit....ret = 0
AppRegisterSignal(): voiceApp pid = 1754

### ZyIMS VoIP TR-104 Config Data Init Procedure Start ###

main(): getpid = 1752

[ENTERED]:ICF_ES

INFO: AUTO_SCALE: 1

INFO: MODE_OF_OPERATION: 0

INFO: SIP_COMPACT_HDRS: NO

INFO: NW_TRACE_ENABLED: YES
INFO: ICF_DEF_SIP_SERVER_PORT: 6062
INFO: ICF_DEF_SIP_PROXY_PORT: 6061
INFO: TRANSPORT_MODE: 0
INFO: ICF_SYS_RESOURCE_LIMIT: 1

[ENTERING]:icf_es_init
[ICF_ES]:PORT initalized succesfully
icf_port_open_ipc_channel path = /var/iptk_es.chanl


the open channel succeded
exit from the es init
icf_register_signal(): icf.exe pid = 1752.
zyecn_sync_parm_2to5: BeaconPeriod sync!!
zyecn_sync_parm_2to5: DtimPeriod sync!!
tr104ConvertPortsType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertDialingType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertDialToneType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertReceiveToneType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertCallerIDType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertCallerIDPayloadType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !!
hotplug:beUsbPortSet: USB Port Alias is cpe-
hotplug:beUsbPortSet: USB Port Type is Device
zyecn_sync_parm_2to5: BeaconPeriod sync!!
tmp: 100 value: 100
zyecn_sync_parm_2to5: DtimPeriod sync!!
tmp: 1 value: 1
tr104ConvertPortsType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertDialingType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertDialToneType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertReceiveToneType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertCallerIDType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertCallerIDPayloadType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertTASType(): <<Error>> INVALID parameter value : '' !!

tr104LoadRdmVoiceProfCfg()/profIdx=1 (base-1): tr104VoProf->ZyXEL_ActiveBoundIfName='(none)', ->ZyXEL_BoundIpAddr='(none)', ->ZyXEL_BoundIfName='Any_WAN', ->ZyXEL_BoundIfList='(none)'...


tr104LoadRdmVoiceProfSipCfg()/profIdx=1 (base-1): voiceProfSip->ZYXEL_op120Use=0 (bool), ->ZYXEL_op120Server='(none)'...

[/sbin/wwan-package-match.sh] VID 1d6b no match, exit
tr104ConvertRegType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertCWStatus(): <<Error>> INVALID parameter value : '' !!
tr104GetMaxSessionsPerLine(): <<WARNing>> 'maxNumOfSessionPerLine' is configured by a (default) value '2'!
[/sbin/wwan-package-match.sh] VID 1d6b no match, exit
tr104ConvertRegType(): <<Error>> INVALID parameter value : '' !!
tr104ConvertCWStatus(): <<Error>> INVALID parameter value : '' !!
tr104GetMaxSessionsPerLine(): <<WARNing>> 'maxNumOfSessionPerLine' is configured by a (default) value '2'!

### ZyIMS VoIP TR-104 Config Data Init Procedure Successfully Finished ###

vcmSetWebSipStatusLastCallNumber(): <<Error>> sipAcct = -1 is out of Valid range [-1, 1].
MM:voiceDspCoreInit(): Entering...
[MM]dspDriverInit(): Start to initialize the DSP (& Phone Port) driver by calling 'PhoneInit(countryCode=27)'...

[MM] PhoneInit(): START~~~~~~
PhoneInit()/WORKAROUND_ZYXEL_PHONE_FXS_ONESHOT_POLARITY_FWD_AFTER_DSP_INIT_SUPPORT: Doing OneShot FXS Phone Port Polarity Forward (FWD) operation on the phone interface (infc=0) via calling 'mmPhoneFxsPolarityStateControlByPortIdx()'!!
PhoneInit()/WORKAROUND_ZYXEL_PHONE_FXS_ONESHOT_POLARITY_FWD_AFTER_DSP_INIT_SUPPORT: Doing OneShot FXS Phone Port Polarity Forward (FWD) operation on the phone interface (infc=1) via calling 'mmPhoneFxsPolarityStateControlByPortIdx()'!!

PhoneInit(): The configured VoIP Country/Region Id = 27 (ZYXEL_REGION_ID_XX): 'NO', 'NOR', 'Norway' ==> Start to Load the corresponding Telephony Profile...

Country Name:NOR
result:9745824
result:-9745824

PhoneSlicDriverParamsAdjust(): (1)VoIP Country/Region Id = 27 (ZYXEL_REGION_ID_XX): 'NO', 'NOR', 'Norway' and (2)the 'To-be-Applied' SLIC Driver Parameter(s)' SLIC Chip Model = 'si3228x'...

[/sbin/usb-hotplug.sh] add /var/usb/usb2
killall: zyMAPSteer: no process killed
device ra0 is not a slave of br0
ifconfig: SIOCGIFFLAGS: No such device
interface ra1 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
hotplug:beUsbPortSet: USB Port Alias is cpe-
hotplug:beUsbPortSet: USB Port Type is Device
interface ra2 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface ra3 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface rai0 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface rai1 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface rai2 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface rai3 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface rai4 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface rai5 does not exist!
configInfcProfile()/infc_idx=0: the Retrieved 'Original' Hook Timer (Threshold) related settings (time unit: msec):
    | flashMin=250, flashMax=600,
    | releaseMin=700, seizeMin=150,
    | autoFlashDur=400,
    | pulseEnable=1,
    |   pulseTime.genSeize=70, pulseTime.genRelease=70,
    |   pulseTime.detSeizeMin=20, pulseTime.detSeizeMax=350,
    |   pulseTime.detReleaseMin=20, pulseTime.detReleaseMax=70.
configInfcProfile()/infc_idx=0: the To-be-Configured 'Modified' Hook Timer (Threshold) related settings (time unit: msec):
    | flashMin=50, flashMax=500,
    | releaseMin=550, seizeMin=150,
    | autoFlashDur=400,
    | pulseEnable=0.
configInfcProfile()/infc_idx=0: the Retrieved 'Modified' Hook Timer (Threshold) related settings:
    <<NOTE>> There is a Known Issue: All values, except the 'autoFlashDur', 'pulseEnable', 'pulseTime.genSeize' and 'pulseTime.genRelease', are presented by the Real Value divided by 10!!!
    | flashMin=5, flashMax=50,
    | releaseMin=55, seizeMin=15,
    | autoFlashDur=400,
    | pulseEnable=0,
    |   pulseTime.genSeize=70, pulseTime.genRelease=70,
    |   pulseTime.detSeizeMin=2, pulseTime.detSeizeMax=35,
    |   pulseTime.detReleaseMin=2, pulseTime.detReleaseMax=7.

configInfcProfile()/infc_idx=1: the Retrieved 'Original' Hook Timer (Threshold) related settings (time unit: msec):
    | flashMin=250, flashMax=600,
    | releaseMin=700, seizeMin=150,
    | autoFlashDur=400,
    | pulseEnable=1,
    |   pulseTime.genSeize=70, pulseTime.genRelease=70,
    |   pulseTime.detSeizeMin=20, pulseTime.detSeizeMax=350,
    |   pulseTime.detReleaseMin=20, pulseTime.detReleaseMax=70.
configInfcProfile()/infc_idx=1: the To-be-Configured 'Modified' Hook Timer (Threshold) related settings (time unit: msec):
    | flashMin=50, flashMax=500,
    | releaseMin=550, seizeMin=150,
    | autoFlashDur=400,
    | pulseEnable=0.
configInfcProfile()/infc_idx=1: the Retrieved 'Modified' Hook Timer (Threshold) related settings:
    <<NOTE>> There is a Known Issue: All values, except the 'autoFlashDur', 'pulseEnable', 'pulseTime.genSeize' and 'pulseTime.genRelease', are presented by the Real Value divided by 10!!!
    | flashMin=5, flashMax=50,
    | releaseMin=55, seizeMin=15,
    | autoFlashDur=400,
    | pulseEnable=0,
    |   pulseTime.genSeize=70, pulseTime.genRelease=70,
    |   pulseTime.detSeizeMin=2, pulseTime.detSeizeMax=35,
    |   pulseTime.detReleaseMin=2, pulseTime.detReleaseMax=7.

VDSP_GetInstance:278
MM:voiceDspCoreInit(): after calling 'dsp_driver_itf.c/dspDriverGetInitData(initData@0x0, initDataLength=0)' to get the inited data of the MM part 'Endpoint_itf_mm.c/cmPhysEndpt[MAX_ENDPT]'...
MM:voiceDspCoreInit(): after calling 'voiceEventIpcSendToVoiceApp()' to send the response message 'VOICE_DSP_INIT_RSP' back to [voiceApp]...
MM:voiceDspCoreInit(): Exiting...with ret=1 & ret2=1 (MM_SUCCESS(1), MM_FAILURE(0))
[Adam] Change log level to (EVA_LOG_ERR).
[GDI] Change log level to (EVA_LOG_ERR).
fxsPhoneIOP_hookFlashDetecTimerSet(): <<Error>>Invalid input timer value {flashTimerMin=0, flashTimerMax=0} for the FXS phone port index-0!! The valid condition is: both values should >= 0 except these two cases - (i)both values == 0, and (ii)(flashTimerMin >= flashTimerMax) while both values > 0!
fxsPhoneIOP_hookFlashDetecTimerSet(): <<Error>>Invalid input timer value {flashTimerMin=0, flashTimerMax=0} for the FXS phone port index-1!! The valid condition is: both values should >= 0 except these two cases - (i)both values == 0, and (ii)(flashTimerMin >= flashTimerMax) while both values > 0!
voiceDspInit(): <<Error>> The Phone (DSP Init) Data: LocationPtr=0x00000000, Size=-1!!
taskCreate()...
voiceDspInit(): Leaving with return 0...
 phonePortVMWISet enters (for 'FXS' phone, phid=8 (8:All 'Ports' of the type), vmwiSigType=2 (1:SigOn,2:SigOff,0:SigNone))...
in PhoneEventCb , the event 18 is not support !
in PhoneEventCb , the event 18 is not support !
taskCreate()...
threadCreateWithArgument(): Thread Name = 'vo-USR-icfCfg00'...
threadCreateWithArgument(): Thread Name = 'vo-USR-icfCfg01'...
taskCreate()...
flushVoipRoutePolicy(): cmd = iptables -t mangle -F IP_ROUTE2_VOIP
iptkConfigThreadTask(): The IPTK Config Thread for VpItr=1 (pid=1754, tid=2503) is running...
iptkConfigThreadTask(): The IPTK Config Thread for VpItr=0 (pid=1754, tid=2502) is running...
dnsThreadTask(): The DNS Main Thread (pid=1754, tid=2501) is running...
zyRegionLListAdd(): <<WARN>> VoIP Country/Region Code 'ZAF' is NOT supported, Skip it!!
zyRegionLListAdd(): <<WARN>> VoIP Country/Region Code 'MEX' is NOT supported, Skip it!!
zyRegionLListAdd(): <<WARN>> VoIP Country/Region Code 'CYP' is NOT supported, Skip it!!

### ZyIMS VoIP Start-up Procedure Finished ###

get_iface_ipv4_address(): <<Error>> EMPTY input 'ifName' to process ==> Drop this action!!
mmCfgSelfIp()/SipAcctId=0: <<WARN>> Invalid or Un-available IP Address from the Config System's Runtime data ('pProf->ZyXEL_BoundIpAddr' = '' (v.s. realtimeAddr='(none)')) for the VoiceProfile-0's bounded WAN interface ('pProf->ZyXEL_ActiveBoundIfName' = '') ===> FAIL to Proceed the Config Procedure of this SIP Acct/Line (now)!!!
mmCfgOfRtpInfo()/SipAcctId=0: <<Error>> MM -> IPTK : 'mmCfgSelfIp(ICF_CFG_SET_SELF_IP_REQ)' FAILed ==> return FALSE now!!
mmConfigSet: <<Error>> 'mmCfgOfRtpInfo(sipAccountId=0)' FAIL ===> try to continue processing the next SIP Account!!
get_iface_ipv4_address(): <<Error>> EMPTY input 'ifName' to process ==> Drop this action!!
mmCfgSelfIp()/SipAcctId=1: <<WARN>> Invalid or Un-available IP Address from the Config System's Runtime data ('pProf->ZyXEL_BoundIpAddr' = '' (v.s. realtimeAddr='(none)')) for the VoiceProfile-0's bounded WAN interface ('pProf->ZyXEL_ActiveBoundIfName' = '') ===> FAIL to Proceed the Config Procedure of this SIP Acct/Line (now)!!!
mmCfgOfRtpInfo()/SipAcctId=1: <<Error>> MM -> IPTK : 'mmCfgSelfIp(ICF_CFG_SET_SELF_IP_REQ)' FAILed ==> return FALSE now!!
mmConfigSet: <<Error>> 'mmCfgOfRtpInfo(sipAccountId=1)' FAIL ===> try to continue processing the next SIP Account!!
iptkConfigMsgProcess()/IPTK_CONFIG_INIT: <<Error>> Cannot Set MM Config for VpItr=0 ==> Stop to do DNS query and IPTK Config!!!
Jun 28 02:01:01 crond[1279]: crond: USER root pid 2524 cmd /usr/etc/rtspStream.sh


aging_en: 1, aging time: 5
aging_unit: 0, aging_cnt: 4
write reg: a0, value: 4000
=========zyMAPSteer=========
===========Start============
=====EasyMesh Process Init=====
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv ra3 set if_status=0]
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv ra2 set if_status=0]
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv ra1 set if_status=0]
get_if_info for br0
interface index is 18
get_if_info OK
Clean up temporary socket
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv ra0 set if_status=1]
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv rai5 set if_status=1]
bind_arp: ifindex=18
Binding to ifindex 18
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv rai4 set if_status=0]
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv rai3 set if_status=0]
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv rai2 set if_status=0]
bind_arp: ifindex=2
Binding to ifindex 2
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv rai1 set if_status=0]
zywifid:Config> [ERROR][ECN] zyecn_Beacon_Tx_setup:4096: cmd=[iwpriv rai0 set if_status=1]
MAC: 0x7fcc5d4c, len = 6
0x0000 : fc 22 f4 78 3d 21
bind_arp: ifindex=20
Binding to ifindex 20

ppe cmd done!

ppe cmd done!

ppe cmd done!

ppe cmd done!
bind_arp: ifindex=21
Binding to ifindex 21

ppe cmd done!

ppe cmd done!

ppe cmd done!
bind_arp: ifindex=22
Binding to ifindex 22

ppe cmd done!
bind_arp: ifindex=29
Binding to ifindex 29
done
bind_arp: ifindex=23
Binding to ifindex 23
bind_arp: ifindex=24
Binding to ifindex 24

ppe cmd done!

ppe cmd done!
bind_arp: ifindex=25
Binding to ifindex 25

ppe cmd done!

ppe cmd done!

ppe cmd done!
bind_arp: ifindex=26
Binding to ifindex 26

ppe cmd done!

ppe cmd done!
bind_arp: ifindex=28
Binding to ifindex 28

ppe cmd done!

ppe cmd done!
bind_arp: ifindex=30
Binding to ifindex 30

ppe cmd done!

ppe cmd done!

ppe cmd done!
     opClass = 81, chn_num = 13
     opClass = 83, chn_num = 9
     opClass = 84, chn_num = 9
     opClass = 128, chn_num = 4
     opClass = 129, chn_num = 2
     opClass = 130, chn_num = 4
     opClass = 81, chn_num = 13
     opClass = 83, chn_num = 9
     opClass = 84, chn_num = 9
     opClass = 128, chn_num = 4
     opClass = 129, chn_num = 2
     opClass = 130, chn_num = 4
done
     opClass = 81, chn_num = 13
     opClass = 83, chn_num = 9
     opClass = 84, chn_num = 9
     opClass = 128, chn_num = 4
     opClass = 129, chn_num = 2
     opClass = 130, chn_num = 4
     opClass = 81, chn_num = 13
     opClass = 83, chn_num = 9
     opClass = 84, chn_num = 9
     opClass = 128, chn_num = 4
     opClass = 129, chn_num = 2
     opClass = 130, chn_num = 4
     opClass = 115, chn_num = 4
     opClass = 118, chn_num = 4
     opClass = 121, chn_num = 11
     opClass = 116, chn_num = 2
     opClass = 119, chn_num = 2
     opClass = 122, chn_num = 5
     opClass = 117, chn_num = 2
     opClass = 120, chn_num = 2
     opClass = 123, chn_num = 5
     opClass = 128, chn_num = 4
     opClass = 129, chn_num = 2
     opClass = 130, chn_num = 4
     opClass = 115, chn_num = 4
     opClass = 118, chn_num = 4
     opClass = 121, chn_num = 11
     opClass = 116, chn_num = 2
     opClass = 119, chn_num = 2
     opClass = 122, chn_num = 5
     opClass = 117, chn_num = 2
     opClass = 120, chn_num = 2
     opClass = 123, chn_num = 5
     opClass = 128, chn_num = 4
     opClass = 129, chn_num = 2
     opClass = 130, chn_num = 4
     opClass = 115, chn_num = 4
     opClass = 118, chn_num = 4
     opClass = 121, chn_num = 11
     opClass = 116, chn_num = 2
     opClass = 119, chn_num = 2
     opClass = 122, chn_num = 5
     opClass = 117, chn_num = 2
     opClass = 120, chn_num = 2
     opClass = 123, chn_num = 5
     opClass = 128, chn_num = 4
     opClass = 129, chn_num = 2
     opClass = 130, chn_num = 4
     opClass = 115, chn_num = 4
     opClass = 118, chn_num = 4
     opClass = 121, chn_num = 11
     opClass = 116, chn_num = 2
     opClass = 119, chn_num = 2
     opClass = 122, chn_num = 5
     opClass = 117, chn_num = 2
     opClass = 120, chn_num = 2
     opClass = 123, chn_num = 5
     opClass = 128, chn_num = 4
     opClass = 129, chn_num = 2
     opClass = 130, chn_num = 4
     opClass = 115, chn_num = 4
     opClass = 118, chn_num = 4
     opClass = 121, chn_num = 11
     opClass = 116, chn_num = 2
     opClass = 119, chn_num = 2
     opClass = 122, chn_num = 5
     opClass = 117, chn_num = 2
     opClass = 120, chn_num = 2
     opClass = 123, chn_num = 5
     opClass = 128, chn_num = 4
     opClass = 129, chn_num = 2
     opClass = 130, chn_num = 4
[zyWifiSwitchPresetSsidStatus](4195) set = 0
[WAPP]map_send_wirelss_inf_info
send info ra0, role: wiap, dev type = 1
MAC Address = fc:22:f4:78:3d:21
send info ra1, role: wiap, dev type = 1
MAC Address = fe:22:f4:18:3d:21
send info ra2, role: wiap, dev type = 1
MAC Address = fe:22:f4:28:3d:21
send info ra3, role: wiap, dev type = 1
MAC Address = fe:22:f4:38:3d:21
send info rai0, role: wiap, dev type = 1
MAC Address = fc:22:f4:78:3d:22
send info rai1, role: wiap, dev type = 1
MAC Address = fe:22:f4:58:3d:21
send info rai2, role: wiap, dev type = 1
MAC Address = fe:22:f4:68:3d:21
send info rai3, role: wiap, dev type = 1
MAC Address = fe:22:f4:78:3d:21
send info rai5, role: wiap, dev type = 1
MAC Address = fe:22:f4:98:3d:21
  inf_count = 9 
 0 name ra0 ch 4, phymode [AX] role [wiap]
 1 name ra1 ch 4, phymode [AX] role [wiap]
 2 name ra2 ch 4, phymode [AX] role [wiap]
 3 name ra3 ch 4, phymode [AX] role [wiap]
 4 name rai0 ch 64, phymode [AX] role [wiap]
 5 name rai1 ch 64, phymode [AX] role [wiap]
 6 name rai2 ch 64, phymode [AX] role [wiap]
 7 name rai3 ch 64, phymode [AX] role [wiap]
 8 name rai5 ch 64, phymode [AX] role [wiap]
cmdu_init: >>>>>>> the receive buffer size after setting is 491520
zyMAP1905_param_update(1124) zyFlags = 0x0002
daemon mapd attached \x00/tmp/wapp_ctrl
ctrler_found
[WAPP]map_send_wirelss_inf_info
send info ra0, role: wiap, dev type = 1
MAC Address = fc:22:f4:78:3d:21
send info ra1, role: wiap, dev type = 1
MAC Address = fe:22:f4:18:3d:21
send info ra2, role: wiap, dev type = 1
MAC Address = fe:22:f4:28:3d:21
send info ra3, role: wiap, dev type = 1
MAC Address = fe:22:f4:38:3d:21
send info rai0, role: wiap, dev type = 1
MAC Address = fc:22:f4:78:3d:22
send info rai1, role: wiap, dev type = 1
MAC Address = fe:22:f4:58:3d:21
send info rai2, role: wiap, dev type = 1
MAC Address = fe:22:f4:68:3d:21
send info rai3, role: wiap, dev type = 1
MAC Address = fe:22:f4:78:3d:21
send info rai5, role: wiap, dev type = 1
MAC Address = fe:22:f4:98:3d:21
Profile Count to host = 0
[WARNING] restart netprobe!
rm: can't remove '/tmp/app_sock': No such file or directory
rm: can't remove '/tmp/app_sock': No such file or directory
bridge name br0
database_init : /data/netprb_db_ver
database_init : Create Device table
database_init : Create Sub Interface table
database_init : Create L2 Device Functions table
arp_init     : arp_event->event_id 1
layer2_init  : layer2_event->event_id 2
ethlink_init : ethlink_event->event_id 3
0 ssid=Zyxel_3D21, autmode=0x0060, encryptype=0x0008, key=********** bh_bss=0, fh_bss=1
send BH config to ra0
wapd sends WPAPSK = **********
send BH config to ra1
wapd sends WPAPSK = **********
send BH config to ra2
wapd sends WPAPSK = **********
send BH config to ra3
wapd sends WPAPSK = **********
send BH config to rai0
wapd sends WPAPSK = **********
send BH config to rai1
wapd sends WPAPSK = **********
send BH config to rai2
wapd sends WPAPSK = **********
send BH config to rai3
wapd sends WPAPSK = **********
send BH config to rai5
wapd sends WPAPSK = **********
1 ssid=Zyxel_3D21_guest1, autmode=0x0060, encryptype=0x0008, key=********** bh_bss=0, fh_bss=1
send BH config to ra0
wapd sends WPAPSK = **********
send BH config to ra1
wapd sends WPAPSK = **********
send BH config to ra2
wapd sends WPAPSK = **********
send BH config to ra3
wapd sends WPAPSK = **********
send BH config to rai0
wapd sends WPAPSK = **********
send BH config to rai1
wapd sends WPAPSK = **********
send BH config to rai2
wapd sends WPAPSK = **********
send BH config to rai3
wapd sends WPAPSK = **********
send BH config to rai5
wapd sends WPAPSK = **********
2 ssid=Zyxel_3D21_guest2, autmode=0x0060, encryptype=0x0008, key=********** bh_bss=0, fh_bss=1
send BH config to ra0
wapd sends WPAPSK = **********
send BH config to ra1
wapd sends WPAPSK = **********
send BH config to ra2
wapd sends WPAPSK = **********
send BH config to ra3
wapd sends WPAPSK = **********
send BH config to rai0
wapd sends WPAPSK = **********
send BH config to rai1
wapd sends WPAPSK = **********
send BH config to rai2
wapd sends WPAPSK = **********
send BH config to rai3
wapd sends WPAPSK = **********
send BH config to rai5
wapd sends WPAPSK = **********
3 ssid=Zyxel_3D21_guest3, autmode=0x0060, encryptype=0x0008, key=********** bh_bss=0, fh_bss=1
send BH config to ra0
wapd sends WPAPSK = **********
send BH config to ra1
wapd sends WPAPSK = **********
send BH config to ra2
wapd sends WPAPSK = **********
send BH config to ra3
wapd sends WPAPSK = **********
send BH config to rai0
wapd sends WPAPSK = **********
send BH config to rai1
wapd sends WPAPSK = **********
send BH config to rai2
wapd sends WPAPSK = **********
send BH config to rai3
wapd sends WPAPSK = **********
send BH config to rai5
wapd sends WPAPSK = **********
1-iwpriv ra0 set AuthMode=WPA2PSKWPA3PSK;
2-iwpriv ra0 set EncrypType=AES;
1-iwpriv ra1 set AuthMode=WPA2PSKWPA3PSK;
2-iwpriv ra1 set EncrypType=AES;
1-iwpriv ra2 set AuthMode=WPA2PSKWPA3PSK;
2-iwpriv ra2 set EncrypType=AES;
1-iwpriv ra3 set AuthMode=WPA2PSKWPA3PSK;
2-iwpriv ra3 set EncrypType=AES;
0 ssid=Zyxel_3D21, autmode=0x0060, encryptype=0x0008, key=********** bh_bss=0, fh_bss=1
send BH config to ra0
wapd sends WPAPSK = **********
send BH config to ra1
wapd sends WPAPSK = **********
send BH config to ra2
wapd sends WPAPSK = **********
send BH config to ra3
wapd sends WPAPSK = **********
send BH config to rai0
wapd sends WPAPSK = **********
send BH config to rai1
wapd sends WPAPSK = **********
send BH config to rai2
wapd sends WPAPSK = **********
send BH config to rai3
wapd sends WPAPSK = **********
send BH config to rai5
wapd sends WPAPSK = **********
1 ssid=Zyxel_3D21_guest1, autmode=0x0060, encryptype=0x0008, key=********** bh_bss=0, fh_bss=1
send BH config to ra0
wapd sends WPAPSK = **********
send BH config to ra1
wapd sends WPAPSK = **********
send BH config to ra2
wapd sends WPAPSK = **********
send BH config to ra3
wapd sends WPAPSK = **********
send BH config to rai0
wapd sends WPAPSK = **********
send BH config to rai1
wapd sends WPAPSK = **********
send BH config to rai2
wapd sends WPAPSK = **********
send BH config to rai3
wapd sends WPAPSK = **********
send BH config to rai5
wapd sends WPAPSK = **********
2 ssid=Zyxel_3D21_guest2_5G, autmode=0x0060, encryptype=0x0008, key=********** bh_bss=0, fh_bss=1
send BH config to ra0
wapd sends WPAPSK = **********
send BH config to ra1
wapd sends WPAPSK = **********
send BH config to ra2
wapd sends WPAPSK = **********
send BH config to ra3
wapd sends WPAPSK = **********
send BH config to rai0
wapd sends WPAPSK = **********
send BH config to rai1
wapd sends WPAPSK = **********
send BH config to rai2
wapd sends WPAPSK = **********
send BH config to rai3
wapd sends WPAPSK = **********
send BH config to rai5
wapd sends WPAPSK = **********
3 ssid=Zyxel_3D21_guest3_5G, autmode=0x0060, encryptype=0x0008, key=********** bh_bss=0, fh_bss=1
send BH config to ra0
wapd sends WPAPSK = **********
send BH config to ra1
wapd sends WPAPSK = **********
send BH config to ra2
wapd sends WPAPSK = **********
send BH config to ra3
wapd sends WPAPSK = **********
send BH config to rai0
wapd sends WPAPSK = **********
send BH config to rai1
wapd sends WPAPSK = **********
send BH config to rai2
wapd sends WPAPSK = **********
send BH config to rai3
wapd sends WPAPSK = **********
send BH config to rai5
wapd sends WPAPSK = **********
4 ssid=3e9cbe639aa1238338a3aa68a8d471b, autmode=0x0020, encryptype=0x0008, key=********** bh_bss=1, fh_bss=0
send BH config to ra0
wapd sends WPAPSK = **********
send BH config to ra1
wapd sends WPAPSK = **********
send BH config to ra2
wapd sends WPAPSK = **********
send BH config to ra3
wapd sends WPAPSK = **********
send BH config to rai0
wapd sends WPAPSK = **********
send BH config to rai1
wapd sends WPAPSK = **********
send BH config to rai2
wapd sends WPAPSK = **********
send BH config to rai3
wapd sends WPAPSK = **********
send BH config to rai5
wapd sends WPAPSK = **********
1-iwpriv rai0 set AuthMode=WPA2PSKWPA3PSK;
2-iwpriv rai0 set EncrypType=AES;
1-iwpriv rai1 set AuthMode=WPA2PSKWPA3PSK;
2-iwpriv rai1 set EncrypType=AES;
1-iwpriv rai2 set AuthMode=WPA2PSKWPA3PSK;
2-iwpriv rai2 set EncrypType=AES;
1-iwpriv rai3 set AuthMode=WPA2PSKWPA3PSK;
2-iwpriv rai3 set EncrypType=AES;
1-iwpriv rai5 set AuthMode=WPA2PSK;
2-iwpriv rai5 set EncrypType=AES;
[WARNING] disconnection all stations!
=====EasyMesh Ready=====