esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:
  level: DEBUG

# Enable Home Assistant API
api:
  encryption:
    key: "twojkluczsamsietworzy"

ota:
  - platform: esphome
    password: "twojehaslosamosietworzy"

wifi:
  ssid: "nazwawifi"
  password: "haslodowifi"

  ap:
    ssid: "Water-Mater-Home-New"
    password: "haslosamosietworzy"

captive_portal:

time:
  - platform: sntp
    id: time_sntp

external_components:
  - source: github://SzczepanLeon/esphome-components@version_4
    components: [ wmbus ]

wmbus:
  mosi_pin: GPIO23
  miso_pin: GPIO19
  clk_pin:  GPIO18
  cs_pin:   GPIO15
  gdo0_pin: GPIO4
  gdo2_pin: GPIO27

  all_drivers: False
  log_all: False

sensor:
  - platform: wmbus
    meter_id: 0x01234567
    type: apator162
    key: "00000000000000000000000000000000"
    sensors:
      - name: "my hot water RSSi"
        field: "rssi"
        accuracy_decimals: 0
        unit_of_measurement: "dBm"
        device_class: "signal_strength"
        state_class: "measurement"
        entity_category: "diagnostic"
      - name: "my hot water"
        field: "total"
        accuracy_decimals: 3
        unit_of_measurement: "m³"
        device_class: "water"
        state_class: "total_increasing"
        icon: "mdi:water"