Advertisement
Guest User

Untitled

a guest
Jun 9th, 2017
324
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 4.80 KB | None | 0 0
  1. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-54-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     SanDisk SDSSDA120G
  6. Serial Number:    151437401769
  7. LU WWN Device Id: 5 001b44 e4df45aa9
  8. Firmware Version: Z22000RL
  9. User Capacity:    120,034,123,776 bytes [120 GB]
  10. Sector Size:      512 bytes logical/physical
  11. Rotation Rate:    Solid State Device
  12. Form Factor:      1.8 inches
  13. Device is:        Not in smartctl database [for details use: -P showall]
  14. ATA Version is:   ACS-2 T13/2015-D revision 3
  15. SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is:    Fri Jun  9 02:41:25 2017 BST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status:  (0x02) Offline data collection activity
  25.                     was completed without error.
  26.                     Auto Offline Data Collection: Disabled.
  27. Self-test execution status:      (   0) The previous self-test routine completed
  28.                     without error or no self-test has ever
  29.                     been run.
  30. Total time to complete Offline
  31. data collection:        (    0) seconds.
  32. Offline data collection
  33. capabilities:            (0x71) SMART execute Offline immediate.
  34.                     No Auto Offline data collection support.
  35.                     Suspend Offline collection upon new
  36.                     command.
  37.                     No Offline surface scan supported.
  38.                     Self-test supported.
  39.                     Conveyance Self-test supported.
  40.                     Selective Self-test supported.
  41. SMART capabilities:            (0x0002) Does not save SMART data before
  42.                     entering power-saving mode.
  43.                     Supports SMART auto save timer.
  44. Error logging capability:        (0x01) Error logging supported.
  45.                     General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time:    (   2) minutes.
  48. Extended self-test routine
  49. recommended polling time:    (  10) minutes.
  50. Conveyance self-test routine
  51. recommended polling time:    (   2) minutes.
  52.  
  53. SMART Attributes Data Structure revision number: 1
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  56.   5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  57.   9 Power_On_Hours          0x0032   053   100   000    Old_age   Always       -       821
  58.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2288
  59. 166 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       2681
  60. 167 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  61. 168 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       2732
  62. 169 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       32
  63. 170 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  64. 171 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  65. 172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  66. 173 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       2704
  67. 174 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       116
  68. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  69. 194 Temperature_Celsius     0x0022   067   100   000    Old_age   Always       -       33 (Min/Max 0/52)
  70. 199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       4168
  71. 230 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       90
  72. 232 Available_Reservd_Space 0x0033   100   100   004    Pre-fail  Always       -       100
  73. 233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       239691
  74. 241 Total_LBAs_Written      0x0030   253   253   000    Old_age   Offline      -       8587
  75. 242 Total_LBAs_Read         0x0030   253   253   000    Old_age   Offline      -       8974
  76.  
  77. SMART Error Log Version: 1
  78. No Errors Logged
  79.  
  80. SMART Self-test log structure revision number 1
  81. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  82. # 1  Offline             Completed without error       00%        23         -
  83.  
  84. SMART Selective self-test log data structure revision number 1
  85.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  86.     1        0        0  Not_testing
  87.     2        0        0  Not_testing
  88.     3        0        0  Not_testing
  89.     4        0        0  Not_testing
  90.     5        0        0  Not_testing
  91. Selective self-test flags (0x0):
  92.   After scanning selected spans, do NOT read-scan remainder of disk.
  93. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement