Start via PSU, E1 driver removed

00:12:16.167 : wait
00:12:17.168 : wait
00:12:17.538 : No start signal detected - forcing start
00:12:17.539 : N1 M110*34
00:12:17.539 : N2 M115*36
00:12:17.539 : N3 M105*36
00:12:17.539 : N4 M114*35
00:12:17.551 : N5 M111 S6*98
00:12:17.554 : N6 T0*60
00:12:17.554 : N7 M20*22
00:12:17.556 : ok
00:12:17.556 : ok 2
00:12:17.563 : N8 M80*19
00:12:17.563 : N9 M105*46
00:12:17.564 : FIRMWARE_NAME:Repetier_1.0.2 COMPILED:Sep 13 2018 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
00:12:17.564 : Cap:PROGRESS:1
00:12:17.564 : Cap:AUTOREPORT_TEMP:1
00:12:17.565 : N10 M220 S100*80
00:12:17.565 : N11 M221 S100*80
00:12:17.565 : N12 M111 S6*84
00:12:17.565 : Cap:EEPROM:1
00:12:17.565 : Cap:AUTOLEVEL:0
00:12:17.565 : Cap:Z_PROBE:0
00:12:17.565 : Cap:SOFTWARE_POWER:1
00:12:17.565 : Cap:TOGGLE_LIGHTS:0
00:12:17.565 : Cap:PAUSESTOP:1
00:12:17.565 : Cap:PREHEAT:1
00:12:17.565 : Printed filament:0.78m Printing time:0 days 2 hours 2 min
00:12:17.565 : PrinterMode:FFF
00:12:17.565 : ok 3
00:12:17.565 : T:-200.00 /0 B:-55.00 /0 B@:0 @:0
00:12:17.565 : ok 4
00:12:17.565 : X:0.00 Y:0.00 Z:0.000 E:0.0000
00:12:17.566 : N13 T0*8
00:12:17.566 : N14 M155 S1*85
00:12:17.566 : ok 5
00:12:17.566 : DebugLevel:6
00:12:17.567 : ok 6
00:12:17.567 : SelectExtruder:0
00:12:17.568 : FlowMultiply:100
00:12:17.569 : ok 7
00:12:17.569 : Begin file list
00:12:17.570 : End file list
00:12:17.570 : ok 8
00:12:17.571 : ok 9
00:12:17.572 : T:-200.00 /0 B:-55.00 /0 B@:0 @:0
00:12:17.573 : ok 10
00:12:17.574 : SpeedMultiply:100
00:12:17.574 : ok 11
00:12:17.577 : FlowMultiply:100
00:12:17.577 : ok 12
00:12:17.577 : DebugLevel:6
00:12:17.577 : ok 13
00:12:17.578 : SelectExtruder:0
00:12:17.578 : FlowMultiply:100
00:12:17.579 : ok 14
00:12:18.580 : wait
00:12:18.685 : T:-200.00 /0 B:-55.00 /0 B@:0 @:0
00:12:19.580 : wait